Selected layouts for the TADA68 (aka Saber68) keyboard
- https://github.com/ravicious/TADA68
- https://github.com/aaronvb/saber68-keymap
- https://github.com/hillam/EasyAVR-Tada68
- https://github.com/qmk/qmk_toolbox
- https://github.com/qmk/qmk_firmware/tree/master/keyboards/tada68
Review, screenshots, and instructions on how to load new FLASH.BIN files:
-
https://chrisabides.wordpress.com/2016/08/31/review-and-programming-tutorial-tada68/
- Press button on the bottom of the board; if you turn it over, it’s on the right side, or under the left side if the board’s right-side up. This will cause the backlights to start flashing.
- NOTE: THE KEYBOARD IS UNUSABLE AT THIS POINT.
- Find your FLASH.BIN file that you downloaded and copy it.
- You may have noticed that when you pushed the button, a new drive will have connected to your PC; that’s the TADA68’s storage. If you open it, there’s a FLASH.BIN file in there. Oh.
- Great idea, thanks to anonymous commenter: create a copy of the original FLASH.BIN file so you’ll always have a copy, just in case.
- Delete that file. Paste your new FLASH.BIN file in its place.
- (Note: if you just try to paste over it, you’ll get a warning that there isn’t enough space for the file operation. You have to delete it. I made the leap of faith, you can too.)
- Press the ESC key; this will restart the TADA68 (literally takes a second), and your new mappings should be live.
-
TADA68 Firmware Editor (requires Flash =P)
-
TADA68 Layout Editor Translation
I was recently annoyed by having no translation when trying to program the fn key on my new tada68, so popped over to /r/translator and my good friend, /u/kschang, was able to help me out. I know some other people were having this issue so I figured I'd share.
In order from top to bottom, the fn drop down menu options are:
- No Operation
- Momentary Press
- Open / On
- Closed / Off
- Toggle
- Momentary AND Press
- Modifier
- Combination Key
- Tap Modifier Key
- Toggle Modifier Key
- Macro
-