#McWRT

###An OpenWRT project for the Linksys WRT1900AC V1 router.

Original source of Marvell 88W8864 Linux Driver/Firmware

https://github.com/TheDgtl/mrvl_wlan_v7drv

Base OpenWRT from fork of Belkin Mamba Tag v3.9

https://github.com/jimmychungbelkin/Mamba

You need to have installed gcc, binutils, patch, bzip2, flex, make, gettext, pkg-config, unzip, libz-dev, libc headers and Subversion 1.7.

To build the image run "make V=s" and then when prompted press enter a lot of times :-) If successful the image should be in the "bin" directory.

Flashing firmware should be done connect to the router with an Ethernet cable.

How to update from Belkin/Linksys UI

1. Login to WRT1900AC local UI
2. Navigate to the Connectivity tab
3. Select Manual firmware update
4. Select image to load (e.g., openwrt-armadaxp--jffs2-128k.img)
5. Select Update firmware

After the firmware is updated, the unit will reboot, and the default ip address will be 192.168.200.1.

The default SSID's will be MCWRT-WPA2-2.4 and MCWRT-WPA2-5.0 with the same password "mcwrt123".

The default username for OpwnWrt is "root", and there is no default password set.

The unit will ask you to set a default password after you login to the UI.

How to update from OpenWrt to Belkin/Linksys

1. Login to the WRT1900AC web UI
2. Select the 'System' Tab, and then 'Backup / Flash Firmware' tab
3. In the 'Flash new firmware image' section click the 'choose file' button and select your firmware
4. Click 'flash image'

Compile Notes

Libtool 2.4 Version Version mismatch error:

1. Change line 20 of file attitude_adjustment/package/feeds/packages/cyrus-sasl/Makefile
2. PKG_FIXUP:=autoreconf libtool