Added extra status messages

lib/AlfenApi.ts

@@ -461,15 +461,49 @@ export class AlfenApi {
 
   #statusToString(statusKey: number): string {
     const statusMapping: Record<number, string> = {
+      0: 'Unknown',
+      1: 'Off',
+      2: 'Booting',
+      3: 'Check Mains',
       4: 'Available',
+      5: 'Authorizing',
+      6: 'Authorized',
       7: 'Cable connected',
-      10: 'Vehicle connected',
-      11: 'Charging',
-      17: 'Session end', // (Unit with socket only?) Cable still connected to EVSE after charging, but car disconnected. Screen shows charging stats until cable disconnected from EVSE.
-      26: 'ConnectorLock Failure', // Not able to lock cable. Please reconnect cable
-      34: 'Blocked', // EVSE is blocked through management interface of CPO.
-      36: 'Paused',
-      41: 'Solar charging',
+      8: 'EV Connected',
+      9: 'Preparing Charging',
+      10: 'Wait Vehicle Charging',
+      11: 'Charging Normal',
+      12: 'Charging Simplified',
+      13: 'Suspended Over-Current',
+      14: 'Suspended HF Switching',
+      15: 'Suspended EV Disconnected',
+      16: 'Finish Wait Vehicle',
+      17: 'Finish Wait Disconnect',
+      18: 'Error Protective Earth',
+      19: 'Error Power Failure',
+      20: 'Error Contactor Fault',
+      21: 'Error Charging',
+      22: 'Error Power Failure',
+      23: 'Error Error Temperature',
+      24: 'Error Illegal CP Value',
+      25: 'Error Illegal PP Value',
+      26: 'Error Too Many Restarts',
+      27: 'Error',
+      28: 'Error Message',
+      29: 'Error Message Not Authorised',
+      30: 'Error Message Cable Not Supported',
+      31: 'Error Message S2 Not Opened',
+      32: 'Error Message Time-Out',
+      33: 'Reserved',
+      34: 'In Operative',
+      35: 'Load Balancing Limited',
+      36: 'Load Balancing Forced Off',
+      38: 'Not Charging',
+      39: 'Solar Charging Wait',
+      40: 'Charging Non Charging',
+      41: 'Solar Charging',
+      42: 'Charge Point Ready, Waiting For Power',
+      43: 'Partial Solar Charging',
     };
 
     return statusMapping[statusKey] ?? 'Unknown';