Hello this is my first project on Arduino Ide - Bitcoin Puzzle
How To
- Download Arduino IDE https://github.com/arduino/arduino-ide/releases
- Run Arduino IDE Select your chip: ESP32 or any other.
- In Arduino IDE, download and install the uBitcoin and ESPAsyncWebServer (from ESP32Async) library.
- Replace the installed uBitcoin library with my uBitcoin.zip library (Documents\Arduino\libraries).
- Once all the steps are completed, finally open your bitcoin_puzzle.ino source code in Arduino IDE and safely flash your selected device. 🚀
How to use the device after flashing:
- Make sure your device is connected to power or a computer.
- Now open Wi-Fi, find the BitcoinPuzzle access point, and connect to it using the default password BitPuzzle, unless you changed the access point and password in the source code.
- Next open a browser and go to the address 192.168.4.1. You will land on a page where you can enter the ranges and the address you're looking for in the puzzle. After that, click Start, and your ESP32 will begin working:
- Once the ESP32 finds the key, it will start blinking with a blue LED. If you see this blinking, go to the interface as described in step 3. There, you will see the key and the address. Good luck! =)
Attention: The web interface has some bugs, just refresh the page !!!
DONATE:
Bitcoin: bc1q5zdx0946kuwacrj8895m82xl3e7uyzuv02qnj3
Ethereum: 0x030bCa7a28b4DD849e61283Bede49f9657e171bA
Tron: TYzWLVME4ntG7xxmMnW711Va9qGt53KaiA
Litecoin: LRZhvggAd6TEos6JdGg54gmQe9kiFup1g4
Bitcoin Cash: qz7jgcy5p77f4llsrhgunpp3yhpq890vdcwajyl2ch