diff --git a/espradio/.gitignore b/espradio/.gitignore new file mode 100644 index 000000000..0933340ad --- /dev/null +++ b/espradio/.gitignore @@ -0,0 +1 @@ +/esp-wifi diff --git a/espradio/Makefile b/espradio/Makefile new file mode 100644 index 000000000..928ae347f --- /dev/null +++ b/espradio/Makefile @@ -0,0 +1,11 @@ +update: esp-wifi/README.md + rm -rf blobs/headers + rm -rf blobs/include + rm -rf blobs/libs + mkdir -p blobs/libs + cp -rp esp-wifi/esp-wifi-sys/headers blobs + cp -rp esp-wifi/esp-wifi-sys/include blobs + cp -rp esp-wifi/esp-wifi-sys/libs/esp32c3 blobs/libs + +esp-wifi/README.md: + git clone https://github.com/esp-rs/esp-wifi diff --git a/espradio/blobs/LICENSE.txt b/espradio/blobs/LICENSE.txt new file mode 100644 index 000000000..976d1fa6f --- /dev/null +++ b/espradio/blobs/LICENSE.txt @@ -0,0 +1,201 @@ + Apache License + Version 2.0, January 2004 + http://www.apache.org/licenses/ + + TERMS AND CONDITIONS FOR USE, REPRODUCTION, AND DISTRIBUTION + + 1. Definitions. + + "License" shall mean the terms and conditions for use, reproduction, + and distribution as defined by Sections 1 through 9 of this document. + + "Licensor" shall mean the copyright owner or entity authorized by + the copyright owner that is granting the License. + + "Legal Entity" shall mean the union of the acting entity and all + other entities that control, are controlled by, or are under common + control with that entity. For the purposes of this definition, + "control" means (i) the power, direct or indirect, to cause the + direction or management of such entity, whether by contract or + otherwise, or (ii) ownership of fifty percent (50%) or more of the + outstanding shares, or (iii) beneficial ownership of such entity. + + "You" (or "Your") shall mean an individual or Legal Entity + exercising permissions granted by this License. + + "Source" form shall mean the preferred form for making modifications, + including but not limited to software source code, documentation + source, and configuration files. + + "Object" form shall mean any form resulting from mechanical + transformation or translation of a Source form, including but + not limited to compiled object code, generated documentation, + and conversions to other media types. + + "Work" shall mean the work of authorship, whether in Source or + Object form, made available under the License, as indicated by a + copyright notice that is included in or attached to the work + (an example is provided in the Appendix below). + + "Derivative Works" shall mean any work, whether in Source or Object + form, that is based on (or derived from) the Work and for which the + editorial revisions, annotations, elaborations, or other modifications + represent, as a whole, an original work of authorship. For the purposes + of this License, Derivative Works shall not include works that remain + separable from, or merely link (or bind by name) to the interfaces of, + the Work and Derivative Works thereof. + + "Contribution" shall mean any work of authorship, including + the original version of the Work and any modifications or additions + to that Work or Derivative Works thereof, that is intentionally + submitted to Licensor for inclusion in the Work by the copyright owner + or by an individual or Legal Entity authorized to submit on behalf of + the copyright owner. For the purposes of this definition, "submitted" + means any form of electronic, verbal, or written communication sent + to the Licensor or its representatives, including but not limited to + communication on electronic mailing lists, source code control systems, + and issue tracking systems that are managed by, or on behalf of, the + Licensor for the purpose of discussing and improving the Work, but + excluding communication that is conspicuously marked or otherwise + designated in writing by the copyright owner as "Not a Contribution." + + "Contributor" shall mean Licensor and any individual or Legal Entity + on behalf of whom a Contribution has been received by Licensor and + subsequently incorporated within the Work. + + 2. Grant of Copyright License. Subject to the terms and conditions of + this License, each Contributor hereby grants to You a perpetual, + worldwide, non-exclusive, no-charge, royalty-free, irrevocable + copyright license to reproduce, prepare Derivative Works of, + publicly display, publicly perform, sublicense, and distribute the + Work and such Derivative Works in Source or Object form. + + 3. Grant of Patent License. Subject to the terms and conditions of + this License, each Contributor hereby grants to You a perpetual, + worldwide, non-exclusive, no-charge, royalty-free, irrevocable + (except as stated in this section) patent license to make, have made, + use, offer to sell, sell, import, and otherwise transfer the Work, + where such license applies only to those patent claims licensable + by such Contributor that are necessarily infringed by their + Contribution(s) alone or by combination of their Contribution(s) + with the Work to which such Contribution(s) was submitted. If You + institute patent litigation against any entity (including a + cross-claim or counterclaim in a lawsuit) alleging that the Work + or a Contribution incorporated within the Work constitutes direct + or contributory patent infringement, then any patent licenses + granted to You under this License for that Work shall terminate + as of the date such litigation is filed. + + 4. Redistribution. You may reproduce and distribute copies of the + Work or Derivative Works thereof in any medium, with or without + modifications, and in Source or Object form, provided that You + meet the following conditions: + + (a) You must give any other recipients of the Work or + Derivative Works a copy of this License; and + + (b) You must cause any modified files to carry prominent notices + stating that You changed the files; and + + (c) You must retain, in the Source form of any Derivative Works + that You distribute, all copyright, patent, trademark, and + attribution notices from the Source form of the Work, + excluding those notices that do not pertain to any part of + the Derivative Works; and + + (d) If the Work includes a "NOTICE" text file as part of its + distribution, then any Derivative Works that You distribute must + include a readable copy of the attribution notices contained + within such NOTICE file, excluding those notices that do not + pertain to any part of the Derivative Works, in at least one + of the following places: within a NOTICE text file distributed + as part of the Derivative Works; within the Source form or + documentation, if provided along with the Derivative Works; or, + within a display generated by the Derivative Works, if and + wherever such third-party notices normally appear. The contents + of the NOTICE file are for informational purposes only and + do not modify the License. You may add Your own attribution + notices within Derivative Works that You distribute, alongside + or as an addendum to the NOTICE text from the Work, provided + that such additional attribution notices cannot be construed + as modifying the License. + + You may add Your own copyright statement to Your modifications and + may provide additional or different license terms and conditions + for use, reproduction, or distribution of Your modifications, or + for any such Derivative Works as a whole, provided Your use, + reproduction, and distribution of the Work otherwise complies with + the conditions stated in this License. + + 5. Submission of Contributions. Unless You explicitly state otherwise, + any Contribution intentionally submitted for inclusion in the Work + by You to the Licensor shall be under the terms and conditions of + this License, without any additional terms or conditions. + Notwithstanding the above, nothing herein shall supersede or modify + the terms of any separate license agreement you may have executed + with Licensor regarding such Contributions. + + 6. Trademarks. This License does not grant permission to use the trade + names, trademarks, service marks, or product names of the Licensor, + except as required for reasonable and customary use in describing the + origin of the Work and reproducing the content of the NOTICE file. + + 7. Disclaimer of Warranty. Unless required by applicable law or + agreed to in writing, Licensor provides the Work (and each + Contributor provides its Contributions) on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or + implied, including, without limitation, any warranties or conditions + of TITLE, NON-INFRINGEMENT, MERCHANTABILITY, or FITNESS FOR A + PARTICULAR PURPOSE. You are solely responsible for determining the + appropriateness of using or redistributing the Work and assume any + risks associated with Your exercise of permissions under this License. + + 8. Limitation of Liability. In no event and under no legal theory, + whether in tort (including negligence), contract, or otherwise, + unless required by applicable law (such as deliberate and grossly + negligent acts) or agreed to in writing, shall any Contributor be + liable to You for damages, including any direct, indirect, special, + incidental, or consequential damages of any character arising as a + result of this License or out of the use or inability to use the + Work (including but not limited to damages for loss of goodwill, + work stoppage, computer failure or malfunction, or any and all + other commercial damages or losses), even if such Contributor + has been advised of the possibility of such damages. + + 9. Accepting Warranty or Additional Liability. While redistributing + the Work or Derivative Works thereof, You may choose to offer, + and charge a fee for, acceptance of support, warranty, indemnity, + or other liability obligations and/or rights consistent with this + License. However, in accepting such obligations, You may act only + on Your own behalf and on Your sole responsibility, not on behalf + of any other Contributor, and only if You agree to indemnify, + defend, and hold each Contributor harmless for any liability + incurred by, or claims asserted against, such Contributor by reason + of your accepting any such warranty or additional liability. + + END OF TERMS AND CONDITIONS + + APPENDIX: How to apply the Apache License to your work. + + To apply the Apache License to your work, attach the following + boilerplate notice, with the fields enclosed by brackets "[]" + replaced with your own identifying information. (Don't include + the brackets!) The text should be enclosed in the appropriate + comment syntax for the file format. We also recommend that a + file or class name and description of purpose be included on the + same "printed page" as the copyright notice for easier + identification within third-party archives. + + Copyright 2022 esp-rs + + Licensed under the Apache License, Version 2.0 (the "License"); + you may not use this file except in compliance with the License. + You may obtain a copy of the License at + + http://www.apache.org/licenses/LICENSE-2.0 + + Unless required by applicable law or agreed to in writing, software + distributed under the License is distributed on an "AS IS" BASIS, + WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. + See the License for the specific language governing permissions and + limitations under the License. diff --git a/espradio/blobs/headers/esp32/esp_bt.h b/espradio/blobs/headers/esp32/esp_bt.h new file mode 100644 index 000000000..936444334 --- /dev/null +++ b/espradio/blobs/headers/esp32/esp_bt.h @@ -0,0 +1,549 @@ +/* + * SPDX-FileCopyrightText: 2015-2023 Espressif Systems (Shanghai) CO LTD + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#ifndef __ESP_BT_H__ +#define __ESP_BT_H__ + +#include +#include +#include "esp_err.h" +#include "sdkconfig.h" +#include "esp_assert.h" + +#ifdef __cplusplus +extern "C" { +#endif + +#ifdef CONFIG_BT_ENABLED + +#define SOC_MEM_BT_DATA_START 0x3ffae6e0 +#define SOC_MEM_BT_DATA_END 0x3ffaff10 +#define SOC_MEM_BT_EM_START 0x3ffb0000 +#define SOC_MEM_BT_EM_END 0x3ffb7cd8 +#define SOC_MEM_BT_EM_BTDM0_START 0x3ffb0000 +#define SOC_MEM_BT_EM_BTDM0_END 0x3ffb09a8 +#define SOC_MEM_BT_EM_BLE_START 0x3ffb09a8 +#define SOC_MEM_BT_EM_BLE_END 0x3ffb1ddc +#define SOC_MEM_BT_EM_BTDM1_START 0x3ffb1ddc +#define SOC_MEM_BT_EM_BTDM1_END 0x3ffb2730 +#define SOC_MEM_BT_EM_BREDR_START 0x3ffb2730 +#define SOC_MEM_BT_EM_BREDR_NO_SYNC_END 0x3ffb6388 //Not calculate with synchronize connection support +#define SOC_MEM_BT_EM_BREDR_END 0x3ffb7cd8 //Calculate with synchronize connection support +#define SOC_MEM_BT_EM_SYNC0_START 0x3ffb6388 +#define SOC_MEM_BT_EM_SYNC0_END 0x3ffb6bf8 +#define SOC_MEM_BT_EM_SYNC1_START 0x3ffb6bf8 +#define SOC_MEM_BT_EM_SYNC1_END 0x3ffb7468 +#define SOC_MEM_BT_EM_SYNC2_START 0x3ffb7468 +#define SOC_MEM_BT_EM_SYNC2_END 0x3ffb7cd8 +#define SOC_MEM_BT_BSS_START 0x3ffb8000 +#define SOC_MEM_BT_BSS_END 0x3ffb9a20 +#define SOC_MEM_BT_MISC_START 0x3ffbdb28 +#define SOC_MEM_BT_MISC_END 0x3ffbdb5c + +#define SOC_MEM_BT_EM_PER_SYNC_SIZE 0x870 + +#define SOC_MEM_BT_EM_BREDR_REAL_END (SOC_MEM_BT_EM_BREDR_NO_SYNC_END + CONFIG_BTDM_CTRL_BR_EDR_MAX_SYNC_CONN_EFF * SOC_MEM_BT_EM_PER_SYNC_SIZE) + +#endif //CONFIG_BT_ENABLED + +#define ESP_BT_CONTROLLER_CONFIG_MAGIC_VAL 0x20221207 + +/** + * @brief Bluetooth mode for controller enable/disable + */ +typedef enum { + ESP_BT_MODE_IDLE = 0x00, /*!< Bluetooth is not running */ + ESP_BT_MODE_BLE = 0x01, /*!< Run BLE mode */ + ESP_BT_MODE_CLASSIC_BT = 0x02, /*!< Run Classic BT mode */ + ESP_BT_MODE_BTDM = 0x03, /*!< Run dual mode */ +} esp_bt_mode_t; + +/** + * @brief BLE sleep clock accuracy(SCA), values for ble_sca field in esp_bt_controller_config_t, + * currently only ESP_BLE_SCA_500PPM and ESP_BLE_SCA_250PPM are supported + */ +enum { + ESP_BLE_SCA_500PPM = 0, /*!< BLE SCA at 500ppm */ + ESP_BLE_SCA_250PPM, /*!< BLE SCA at 250ppm */ + ESP_BLE_SCA_150PPM, /*!< BLE SCA at 150ppm */ + ESP_BLE_SCA_100PPM, /*!< BLE SCA at 100ppm */ + ESP_BLE_SCA_75PPM, /*!< BLE SCA at 75ppm */ + ESP_BLE_SCA_50PPM, /*!< BLE SCA at 50ppm */ + ESP_BLE_SCA_30PPM, /*!< BLE SCA at 30ppm */ + ESP_BLE_SCA_20PPM, /*!< BLE SCA at 20ppm */ +}; + +#ifdef CONFIG_BT_ENABLED +/* While scanning, if the free memory value in controller is less than SCAN_SEND_ADV_RESERVED_SIZE, +the adv packet will be discarded until the memory is restored. */ +#define SCAN_SEND_ADV_RESERVED_SIZE 1000 +/* enable controller log debug when adv lost */ +#define CONTROLLER_ADV_LOST_DEBUG_BIT (0<<0) + +#ifdef CONFIG_BTDM_CTRL_HCI_UART_NO +#define BT_HCI_UART_NO_DEFAULT CONFIG_BTDM_CTRL_HCI_UART_NO +#else +#define BT_HCI_UART_NO_DEFAULT 1 +#endif /* BT_HCI_UART_NO_DEFAULT */ + +#ifdef CONFIG_BTDM_CTRL_HCI_UART_BAUDRATE +#define BT_HCI_UART_BAUDRATE_DEFAULT CONFIG_BTDM_CTRL_HCI_UART_BAUDRATE +#else +#define BT_HCI_UART_BAUDRATE_DEFAULT 921600 +#endif /* BT_HCI_UART_BAUDRATE_DEFAULT */ + +#ifdef CONFIG_BTDM_SCAN_DUPL_TYPE +#define SCAN_DUPLICATE_TYPE_VALUE CONFIG_BTDM_SCAN_DUPL_TYPE +#else +#define SCAN_DUPLICATE_TYPE_VALUE 0 +#endif + +/* normal adv cache size */ +#ifdef CONFIG_BTDM_SCAN_DUPL_CACHE_SIZE +#define NORMAL_SCAN_DUPLICATE_CACHE_SIZE CONFIG_BTDM_SCAN_DUPL_CACHE_SIZE +#else +#define NORMAL_SCAN_DUPLICATE_CACHE_SIZE 20 +#endif + +#ifndef CONFIG_BTDM_BLE_MESH_SCAN_DUPL_EN +#define CONFIG_BTDM_BLE_MESH_SCAN_DUPL_EN FALSE +#endif + +#define SCAN_DUPLICATE_MODE_NORMAL_ADV_ONLY 0 +#define SCAN_DUPLICATE_MODE_NORMAL_ADV_MESH_ADV 1 + +#if CONFIG_BTDM_BLE_MESH_SCAN_DUPL_EN + #define SCAN_DUPLICATE_MODE SCAN_DUPLICATE_MODE_NORMAL_ADV_MESH_ADV + #ifdef CONFIG_BTDM_MESH_DUPL_SCAN_CACHE_SIZE + #define MESH_DUPLICATE_SCAN_CACHE_SIZE CONFIG_BTDM_MESH_DUPL_SCAN_CACHE_SIZE + #else + #define MESH_DUPLICATE_SCAN_CACHE_SIZE 50 + #endif +#else + #define SCAN_DUPLICATE_MODE SCAN_DUPLICATE_MODE_NORMAL_ADV_ONLY + #define MESH_DUPLICATE_SCAN_CACHE_SIZE 0 +#endif + +#ifdef CONFIG_BTDM_SCAN_DUPL_CACHE_REFRESH_PERIOD +#define SCAN_DUPL_CACHE_REFRESH_PERIOD CONFIG_BTDM_SCAN_DUPL_CACHE_REFRESH_PERIOD +#else +#define SCAN_DUPL_CACHE_REFRESH_PERIOD 0 +#endif + +#if defined(CONFIG_BTDM_CTRL_MODE_BLE_ONLY) +#define BTDM_CONTROLLER_MODE_EFF ESP_BT_MODE_BLE +#elif defined(CONFIG_BTDM_CTRL_MODE_BR_EDR_ONLY) +#define BTDM_CONTROLLER_MODE_EFF ESP_BT_MODE_CLASSIC_BT +#else +#define BTDM_CONTROLLER_MODE_EFF ESP_BT_MODE_BTDM +#endif + +#ifdef CONFIG_BTDM_CTRL_AUTO_LATENCY_EFF +#define BTDM_CTRL_AUTO_LATENCY_EFF CONFIG_BTDM_CTRL_AUTO_LATENCY_EFF +#else +#define BTDM_CTRL_AUTO_LATENCY_EFF false +#endif + +#ifdef CONFIG_BTDM_CTRL_HLI +#define BTDM_CTRL_HLI CONFIG_BTDM_CTRL_HLI +#else +#define BTDM_CTRL_HLI false +#endif + +#ifdef CONFIG_BTDM_CTRL_LEGACY_AUTH_VENDOR_EVT_EFF +#define BTDM_CTRL_LEGACY_AUTH_VENDOR_EVT_EFF CONFIG_BTDM_CTRL_LEGACY_AUTH_VENDOR_EVT_EFF +#else +#define BTDM_CTRL_LEGACY_AUTH_VENDOR_EVT_EFF false +#endif + +#define BTDM_CONTROLLER_BLE_MAX_CONN_LIMIT 9 //Maximum BLE connection limitation +#define BTDM_CONTROLLER_BR_EDR_MAX_ACL_CONN_LIMIT 7 //Maximum ACL connection limitation +#define BTDM_CONTROLLER_BR_EDR_MAX_SYNC_CONN_LIMIT 3 //Maximum SCO/eSCO connection limitation + +#define BTDM_CONTROLLER_SCO_DATA_PATH_HCI 0 // SCO data is routed to HCI +#define BTDM_CONTROLLER_SCO_DATA_PATH_PCM 1 // SCO data path is PCM + +#define BT_CONTROLLER_INIT_CONFIG_DEFAULT() { \ + .controller_task_stack_size = ESP_TASK_BT_CONTROLLER_STACK, \ + .controller_task_prio = ESP_TASK_BT_CONTROLLER_PRIO, \ + .hci_uart_no = BT_HCI_UART_NO_DEFAULT, \ + .hci_uart_baudrate = BT_HCI_UART_BAUDRATE_DEFAULT, \ + .scan_duplicate_mode = SCAN_DUPLICATE_MODE, \ + .scan_duplicate_type = SCAN_DUPLICATE_TYPE_VALUE, \ + .normal_adv_size = NORMAL_SCAN_DUPLICATE_CACHE_SIZE, \ + .mesh_adv_size = MESH_DUPLICATE_SCAN_CACHE_SIZE, \ + .send_adv_reserved_size = SCAN_SEND_ADV_RESERVED_SIZE, \ + .controller_debug_flag = CONTROLLER_ADV_LOST_DEBUG_BIT, \ + .mode = BTDM_CONTROLLER_MODE_EFF, \ + .ble_max_conn = CONFIG_BTDM_CTRL_BLE_MAX_CONN_EFF, \ + .bt_max_acl_conn = CONFIG_BTDM_CTRL_BR_EDR_MAX_ACL_CONN_EFF, \ + .bt_sco_datapath = CONFIG_BTDM_CTRL_BR_EDR_SCO_DATA_PATH_EFF, \ + .auto_latency = BTDM_CTRL_AUTO_LATENCY_EFF, \ + .bt_legacy_auth_vs_evt = BTDM_CTRL_LEGACY_AUTH_VENDOR_EVT_EFF, \ + .bt_max_sync_conn = CONFIG_BTDM_CTRL_BR_EDR_MAX_SYNC_CONN_EFF, \ + .ble_sca = CONFIG_BTDM_BLE_SLEEP_CLOCK_ACCURACY_INDEX_EFF, \ + .pcm_role = CONFIG_BTDM_CTRL_PCM_ROLE_EFF, \ + .pcm_polar = CONFIG_BTDM_CTRL_PCM_POLAR_EFF, \ + .hli = BTDM_CTRL_HLI, \ + .dup_list_refresh_period = SCAN_DUPL_CACHE_REFRESH_PERIOD, \ + .magic = ESP_BT_CONTROLLER_CONFIG_MAGIC_VAL, \ +} + +#else +#define BT_CONTROLLER_INIT_CONFIG_DEFAULT() {0}; ESP_STATIC_ASSERT(0, "please enable bluetooth in menuconfig to use esp_bt.h"); +#endif + +/** + * @brief Controller config options, depend on config mask. + * Config mask indicate which functions enabled, this means + * some options or parameters of some functions enabled by config mask. + */ +typedef struct { + /* + * Following parameters can be configured runtime, when call esp_bt_controller_init() + */ + uint16_t controller_task_stack_size; /*!< Bluetooth controller task stack size */ + uint8_t controller_task_prio; /*!< Bluetooth controller task priority */ + uint8_t hci_uart_no; /*!< If use UART1/2 as HCI IO interface, indicate UART number */ + uint32_t hci_uart_baudrate; /*!< If use UART1/2 as HCI IO interface, indicate UART baudrate */ + uint8_t scan_duplicate_mode; /*!< scan duplicate mode */ + uint8_t scan_duplicate_type; /*!< scan duplicate type */ + uint16_t normal_adv_size; /*!< Normal adv size for scan duplicate */ + uint16_t mesh_adv_size; /*!< Mesh adv size for scan duplicate */ + uint16_t send_adv_reserved_size; /*!< Controller minimum memory value */ + uint32_t controller_debug_flag; /*!< Controller debug log flag */ + uint8_t mode; /*!< Controller mode: BR/EDR, BLE or Dual Mode */ + uint8_t ble_max_conn; /*!< BLE maximum connection numbers */ + uint8_t bt_max_acl_conn; /*!< BR/EDR maximum ACL connection numbers */ + uint8_t bt_sco_datapath; /*!< SCO data path, i.e. HCI or PCM module */ + bool auto_latency; /*!< BLE auto latency, used to enhance classic BT performance */ + bool bt_legacy_auth_vs_evt; /*!< BR/EDR Legacy auth complete event required to protect from BIAS attack */ + /* + * Following parameters can not be configured runtime when call esp_bt_controller_init() + * It will be overwrite with a constant value which in menuconfig or from a macro. + * So, do not modify the value when esp_bt_controller_init() + */ + uint8_t bt_max_sync_conn; /*!< BR/EDR maximum ACL connection numbers. Effective in menuconfig */ + uint8_t ble_sca; /*!< BLE low power crystal accuracy index */ + uint8_t pcm_role; /*!< PCM role (master & slave)*/ + uint8_t pcm_polar; /*!< PCM polar trig (falling clk edge & rising clk edge) */ + bool hli; /*!< Using high level interrupt or not */ + uint16_t dup_list_refresh_period; /*!< Duplicate scan list refresh period */ + uint32_t magic; /*!< Magic number */ +} esp_bt_controller_config_t; + +/** + * @brief Bluetooth controller enable/disable/initialised/de-initialised status + */ +typedef enum { + ESP_BT_CONTROLLER_STATUS_IDLE = 0, + ESP_BT_CONTROLLER_STATUS_INITED, + ESP_BT_CONTROLLER_STATUS_ENABLED, + ESP_BT_CONTROLLER_STATUS_NUM, +} esp_bt_controller_status_t; + +/** + * @brief BLE tx power type + * ESP_BLE_PWR_TYPE_CONN_HDL0-8: for each connection, and only be set after connection completed. + * when disconnect, the correspond TX power is not effected. + * ESP_BLE_PWR_TYPE_ADV : for advertising/scan response. + * ESP_BLE_PWR_TYPE_SCAN : for scan. + * ESP_BLE_PWR_TYPE_DEFAULT : if each connection's TX power is not set, it will use this default value. + * if neither in scan mode nor in adv mode, it will use this default value. + * If none of power type is set, system will use ESP_PWR_LVL_P3 as default for ADV/SCAN/CONN0-9. + */ +typedef enum { + ESP_BLE_PWR_TYPE_CONN_HDL0 = 0, /*!< For connection handle 0 */ + ESP_BLE_PWR_TYPE_CONN_HDL1 = 1, /*!< For connection handle 1 */ + ESP_BLE_PWR_TYPE_CONN_HDL2 = 2, /*!< For connection handle 2 */ + ESP_BLE_PWR_TYPE_CONN_HDL3 = 3, /*!< For connection handle 3 */ + ESP_BLE_PWR_TYPE_CONN_HDL4 = 4, /*!< For connection handle 4 */ + ESP_BLE_PWR_TYPE_CONN_HDL5 = 5, /*!< For connection handle 5 */ + ESP_BLE_PWR_TYPE_CONN_HDL6 = 6, /*!< For connection handle 6 */ + ESP_BLE_PWR_TYPE_CONN_HDL7 = 7, /*!< For connection handle 7 */ + ESP_BLE_PWR_TYPE_CONN_HDL8 = 8, /*!< For connection handle 8 */ + ESP_BLE_PWR_TYPE_ADV = 9, /*!< For advertising */ + ESP_BLE_PWR_TYPE_SCAN = 10, /*!< For scan */ + ESP_BLE_PWR_TYPE_DEFAULT = 11, /*!< For default, if not set other, it will use default value */ + ESP_BLE_PWR_TYPE_NUM = 12, /*!< TYPE numbers */ +} esp_ble_power_type_t; + +/** + * @brief Bluetooth TX power level(index), it's just a index corresponding to power(dbm). + */ +typedef enum { + ESP_PWR_LVL_N12 = 0, /*!< Corresponding to -12dbm */ + ESP_PWR_LVL_N9 = 1, /*!< Corresponding to -9dbm */ + ESP_PWR_LVL_N6 = 2, /*!< Corresponding to -6dbm */ + ESP_PWR_LVL_N3 = 3, /*!< Corresponding to -3dbm */ + ESP_PWR_LVL_N0 = 4, /*!< Corresponding to 0dbm */ + ESP_PWR_LVL_P3 = 5, /*!< Corresponding to +3dbm */ + ESP_PWR_LVL_P6 = 6, /*!< Corresponding to +6dbm */ + ESP_PWR_LVL_P9 = 7, /*!< Corresponding to +9dbm */ + ESP_PWR_LVL_N14 = ESP_PWR_LVL_N12, /*!< Backward compatibility! Setting to -14dbm will actually result to -12dbm */ + ESP_PWR_LVL_N11 = ESP_PWR_LVL_N9, /*!< Backward compatibility! Setting to -11dbm will actually result to -9dbm */ + ESP_PWR_LVL_N8 = ESP_PWR_LVL_N6, /*!< Backward compatibility! Setting to -8dbm will actually result to -6dbm */ + ESP_PWR_LVL_N5 = ESP_PWR_LVL_N3, /*!< Backward compatibility! Setting to -5dbm will actually result to -3dbm */ + ESP_PWR_LVL_N2 = ESP_PWR_LVL_N0, /*!< Backward compatibility! Setting to -2dbm will actually result to 0dbm */ + ESP_PWR_LVL_P1 = ESP_PWR_LVL_P3, /*!< Backward compatibility! Setting to +1dbm will actually result to +3dbm */ + ESP_PWR_LVL_P4 = ESP_PWR_LVL_P6, /*!< Backward compatibility! Setting to +4dbm will actually result to +6dbm */ + ESP_PWR_LVL_P7 = ESP_PWR_LVL_P9, /*!< Backward compatibility! Setting to +7dbm will actually result to +9dbm */ +} esp_power_level_t; + +/** + * @brief Bluetooth audio data transport path + */ +typedef enum { + ESP_SCO_DATA_PATH_HCI = 0, /*!< data over HCI transport */ + ESP_SCO_DATA_PATH_PCM = 1, /*!< data over PCM interface */ +} esp_sco_data_path_t; + +/** + * @brief Set BLE TX power + * Connection Tx power should only be set after connection created. + * @param power_type : The type of which tx power, could set Advertising/Connection/Default and etc + * @param power_level: Power level(index) corresponding to absolute value(dbm) + * @return ESP_OK - success, other - failed + */ +esp_err_t esp_ble_tx_power_set(esp_ble_power_type_t power_type, esp_power_level_t power_level); + +/** + * @brief Get BLE TX power + * Connection Tx power should only be get after connection created. + * @param power_type : The type of which tx power, could set Advertising/Connection/Default and etc + * @return >= 0 - Power level, < 0 - Invalid + */ +esp_power_level_t esp_ble_tx_power_get(esp_ble_power_type_t power_type); + +/** + * @brief Set BR/EDR TX power + * BR/EDR power control will use the power in range of minimum value and maximum value. + * The power level will effect the global BR/EDR TX power, such inquire, page, connection and so on. + * Please call the function after esp_bt_controller_enable and before any function which cause RF do TX. + * So you can call the function before doing discovery, profile init and so on. + * For example, if you want BR/EDR use the new TX power to do inquire, you should call + * this function before inquire. Another word, If call this function when BR/EDR is in inquire(ING), + * please do inquire again after call this function. + * Default minimum power level is ESP_PWR_LVL_N0, and maximum power level is ESP_PWR_LVL_P3. + * @param min_power_level: The minimum power level + * @param max_power_level: The maximum power level + * @return ESP_OK - success, other - failed + */ +esp_err_t esp_bredr_tx_power_set(esp_power_level_t min_power_level, esp_power_level_t max_power_level); + +/** + * @brief Get BR/EDR TX power + * If the argument is not NULL, then store the corresponding value. + * @param min_power_level: The minimum power level + * @param max_power_level: The maximum power level + * @return ESP_OK - success, other - failed + */ +esp_err_t esp_bredr_tx_power_get(esp_power_level_t *min_power_level, esp_power_level_t *max_power_level); + +/** + * @brief Set default SCO data path + * Should be called after controller is enabled, and before (e)SCO link is established + * @param data_path: SCO data path + * @return ESP_OK - success, other - failed + */ +esp_err_t esp_bredr_sco_datapath_set(esp_sco_data_path_t data_path); + +/** + * @brief Initialize BT controller to allocate task and other resource. + * This function should be called only once, before any other BT functions are called. + * @param cfg: Initial configuration of BT controller. Different from previous version, there's a mode and some + * connection configuration in "cfg" to configure controller work mode and allocate the resource which is needed. + * @return ESP_OK - success, other - failed + */ +esp_err_t esp_bt_controller_init(esp_bt_controller_config_t *cfg); + +/** + * @brief De-initialize BT controller to free resource and delete task. + * You should stop advertising and scanning, as well as + * disconnect all existing connections before de-initializing BT controller. + * + * This function should be called only once, after any other BT functions are called. + * @return ESP_OK - success, other - failed + */ +esp_err_t esp_bt_controller_deinit(void); + +/** + * @brief Enable BT controller. + * Due to a known issue, you cannot call esp_bt_controller_enable() a second time + * to change the controller mode dynamically. To change controller mode, call + * esp_bt_controller_disable() and then call esp_bt_controller_enable() with the new mode. + * @param mode : the mode(BLE/BT/BTDM) to enable. For compatible of API, retain this argument. This mode must be + * equal as the mode in "cfg" of esp_bt_controller_init(). + * @return ESP_OK - success, other - failed + */ +esp_err_t esp_bt_controller_enable(esp_bt_mode_t mode); + +/** + * @brief Disable BT controller + * @return ESP_OK - success, other - failed + */ +esp_err_t esp_bt_controller_disable(void); + +/** + * @brief Get BT controller is initialised/de-initialised/enabled/disabled + * @return status value + */ +esp_bt_controller_status_t esp_bt_controller_get_status(void); + +/** @brief esp_vhci_host_callback + * used for vhci call host function to notify what host need to do + */ +typedef struct esp_vhci_host_callback { + void (*notify_host_send_available)(void); /*!< callback used to notify that the host can send packet to controller */ + int (*notify_host_recv)(uint8_t *data, uint16_t len); /*!< callback used to notify that the controller has a packet to send to the host*/ +} esp_vhci_host_callback_t; + +/** @brief esp_vhci_host_check_send_available + * used for check actively if the host can send packet to controller or not. + * @return true for ready to send, false means cannot send packet + */ +bool esp_vhci_host_check_send_available(void); + +/** @brief esp_vhci_host_send_packet + * host send packet to controller + * + * Should not call this function from within a critical section + * or when the scheduler is suspended. + * + * @param data the packet point + * @param len the packet length + */ +void esp_vhci_host_send_packet(uint8_t *data, uint16_t len); + +/** @brief esp_vhci_host_register_callback + * register the vhci reference callback + * struct defined by vhci_host_callback structure. + * @param callback esp_vhci_host_callback type variable + * @return ESP_OK - success, ESP_FAIL - failed + */ +esp_err_t esp_vhci_host_register_callback(const esp_vhci_host_callback_t *callback); + +/** @brief esp_bt_controller_mem_release + * release the controller memory as per the mode + * + * This function releases the BSS, data and other sections of the controller to heap. The total size is about 70k bytes. + * + * esp_bt_controller_mem_release(mode) should be called only before esp_bt_controller_init() + * or after esp_bt_controller_deinit(). + * + * Note that once BT controller memory is released, the process cannot be reversed. It means you cannot use the bluetooth + * mode which you have released by this function. + * + * If your firmware will later upgrade the Bluetooth controller mode (BLE -> BT Classic or disabled -> enabled) + * then do not call this function. + * + * If the app calls esp_bt_controller_enable(ESP_BT_MODE_BLE) to use BLE only then it is safe to call + * esp_bt_controller_mem_release(ESP_BT_MODE_CLASSIC_BT) at initialization time to free unused BT Classic memory. + * + * If the mode is ESP_BT_MODE_BTDM, then it may be useful to call API esp_bt_mem_release(ESP_BT_MODE_BTDM) instead, + * which internally calls esp_bt_controller_mem_release(ESP_BT_MODE_BTDM) and additionally releases the BSS and data + * consumed by the BT/BLE host stack to heap. For more details about usage please refer to the documentation of + * esp_bt_mem_release() function + * + * @param mode : the mode want to release memory + * @return ESP_OK - success, other - failed + */ +esp_err_t esp_bt_controller_mem_release(esp_bt_mode_t mode); + +/** @brief esp_bt_mem_release + * release controller memory and BSS and data section of the BT/BLE host stack as per the mode + * + * This function first releases controller memory by internally calling esp_bt_controller_mem_release(). + * Additionally, if the mode is set to ESP_BT_MODE_BTDM, it also releases the BSS and data consumed by the BT/BLE host stack to heap + * + * Note that once BT memory is released, the process cannot be reversed. It means you cannot use the bluetooth + * mode which you have released by this function. + * + * If your firmware will later upgrade the Bluetooth controller mode (BLE -> BT Classic or disabled -> enabled) + * then do not call this function. + * + * If you never intend to use bluetooth in a current boot-up cycle, you can call esp_bt_mem_release(ESP_BT_MODE_BTDM) + * before esp_bt_controller_init or after esp_bt_controller_deinit. + * + * For example, if a user only uses bluetooth for setting the WiFi configuration, and does not use bluetooth in the rest of the product operation". + * In such cases, after receiving the WiFi configuration, you can disable/deinit bluetooth and release its memory. + * Below is the sequence of APIs to be called for such scenarios: + * + * esp_bluedroid_disable(); + * esp_bluedroid_deinit(); + * esp_bt_controller_disable(); + * esp_bt_controller_deinit(); + * esp_bt_mem_release(ESP_BT_MODE_BTDM); + * + * @note In case of NimBLE host, to release BSS and data memory to heap, the mode needs to be + * set to ESP_BT_MODE_BTDM as controller is dual mode. + * @param mode : the mode whose memory is to be released + * @return ESP_OK - success, other - failed + */ +esp_err_t esp_bt_mem_release(esp_bt_mode_t mode); + +/** + * @brief enable bluetooth to enter modem sleep + * + * Note that this function shall not be invoked before esp_bt_controller_enable() + * + * There are currently two options for bluetooth modem sleep, one is ORIG mode, and another is EVED Mode. EVED Mode is intended for BLE only. + * + * For ORIG mode: + * Bluetooth modem sleep is enabled in controller start up by default if CONFIG_CTRL_BTDM_MODEM_SLEEP is set and "ORIG mode" is selected. In ORIG modem sleep mode, bluetooth controller will switch off some components and pause to work every now and then, if there is no event to process; and wakeup according to the scheduled interval and resume the work. It can also wakeup earlier upon external request using function "esp_bt_controller_wakeup_request". + * + * @return + * - ESP_OK : success + * - other : failed + */ +esp_err_t esp_bt_sleep_enable(void); + + +/** + * @brief disable bluetooth modem sleep + * + * Note that this function shall not be invoked before esp_bt_controller_enable() + * + * If esp_bt_sleep_disable() is called, bluetooth controller will not be allowed to enter modem sleep; + * + * If ORIG modem sleep mode is in use, if this function is called, bluetooth controller may not immediately wake up if it is dormant then. + * In this case, esp_bt_controller_wakeup_request() can be used to shorten the time for wakeup. + * + * @return + * - ESP_OK : success + * - other : failed + */ +esp_err_t esp_bt_sleep_disable(void); + +/** + * @brief Manually clear scan duplicate list + * + * Note that scan duplicate list will be automatically cleared when the maximum amount of device in the filter is reached + * the amount of device in the filter can be configured in menuconfig. + * + * @note This function name is incorrectly spelled, it will be fixed in release 5.x version. + * + * @return + * - ESP_OK : success + * - other : failed + */ +esp_err_t esp_ble_scan_dupilcate_list_flush(void); + +/** + * @brief bt Wi-Fi power domain power on + */ +void esp_wifi_bt_power_domain_on(void); + +/** + * @brief bt Wi-Fi power domain power off + */ +void esp_wifi_bt_power_domain_off(void); + +#ifdef __cplusplus +} +#endif + +#endif /* __ESP_BT_H__ */ diff --git a/espradio/blobs/headers/esp32/phy_init_data.h b/espradio/blobs/headers/esp32/phy_init_data.h new file mode 100644 index 000000000..36f5440ca --- /dev/null +++ b/espradio/blobs/headers/esp32/phy_init_data.h @@ -0,0 +1,167 @@ +/* + * SPDX-FileCopyrightText: 2016-2021 Espressif Systems (Shanghai) CO LTD + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#ifndef PHY_INIT_DATA_H +#define PHY_INIT_DATA_H /* don't use #pragma once here, we compile this file sometimes */ +#include "esp_phy_init.h" +#include "sdkconfig.h" + +// constrain a value between 'low' and 'high', inclusive +#define LIMIT(val, low, high) ((val < low) ? low : (val > high) ? high : val) + +#define PHY_INIT_MAGIC "PHYINIT" + +// define the lowest tx power as LOWEST_PHY_TX_POWER +#define PHY_TX_POWER_LOWEST LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 52) +#define PHY_TX_POWER_OFFSET 44 +#define PHY_TX_POWER_NUM 5 + +#if CONFIG_ESP_PHY_MULTIPLE_INIT_DATA_BIN +#define PHY_CRC_ALGORITHM 1 +#define PHY_COUNTRY_CODE_LEN 2 +#define PHY_INIT_DATA_TYPE_OFFSET 126 +#define PHY_SUPPORT_MULTIPLE_BIN_OFFSET 125 +#endif +static const char phy_init_magic_pre[] = PHY_INIT_MAGIC; + +/** + * @brief Structure containing default recommended PHY initialization parameters. + */ +static const esp_phy_init_data_t phy_init_data= { { + 3, + 3, + 0x05, + 0x09, + 0x06, + 0x05, + 0x03, + 0x06, + 0x05, + 0x04, + 0x06, + 0x04, + 0x05, + 0x00, + 0x00, + 0x00, + 0x00, + 0x05, + 0x09, + 0x06, + 0x05, + 0x03, + 0x06, + 0x05, + 0x00, + 0x00, + 0x00, + 0x00, + 0x00, + 0x00, + 0x00, + 0x00, + 0xfc, + 0xfc, + 0xfe, + 0xf0, + 0xf0, + 0xf0, + 0xe0, + 0xe0, + 0xe0, + 0x18, + 0x18, + 0x18, + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 40, 78), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 40, 72), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 40, 66), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 40, 60), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 40, 56), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 40, 52), + 0, + 1, + 1, + 2, + 2, + 3, + 4, + 5, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, +} }; + +static const char phy_init_magic_post[] = PHY_INIT_MAGIC; + +#if CONFIG_ESP_PHY_MULTIPLE_INIT_DATA_BIN +/** + * @brief PHY init data control infomation structure + */ +typedef struct { + uint8_t control_info_checksum[4]; /*!< 4-byte control infomation checksum */ + uint8_t multiple_bin_checksum[4]; /*!< 4-byte multiple bin checksum */ + uint8_t check_algorithm; /*!< check algorithm */ + uint8_t version; /*!< PHY init data bin version */ + uint8_t number; /*!< PHY init data bin number */ + uint8_t length[2]; /*!< Length of each PHY init data bin */ + uint8_t reserved[19]; /*!< 19-byte reserved */ +} __attribute__ ((packed)) phy_control_info_data_t; + +/** + * @brief Country corresponds to PHY init data type structure + */ +typedef struct { + char cc[PHY_COUNTRY_CODE_LEN]; + uint8_t type; +} phy_country_to_bin_type_t; +#endif +#endif /* PHY_INIT_DATA_H */ diff --git a/espradio/blobs/headers/esp32/sdkconfig.h b/espradio/blobs/headers/esp32/sdkconfig.h new file mode 100644 index 000000000..2dea3b347 --- /dev/null +++ b/espradio/blobs/headers/esp32/sdkconfig.h @@ -0,0 +1,914 @@ +/* + * Automatically generated file. DO NOT EDIT. + * Espressif IoT Development Framework (ESP-IDF) 5.1.2 Configuration Header + */ +#pragma once +#define CONFIG_SOC_BROWNOUT_RESET_SUPPORTED "Not determined" +#define CONFIG_SOC_TWAI_BRP_DIV_SUPPORTED "Not determined" +#define CONFIG_SOC_DPORT_WORKAROUND "Not determined" +#define CONFIG_SOC_CAPS_ECO_VER_MAX 301 +#define CONFIG_SOC_ADC_SUPPORTED 1 +#define CONFIG_SOC_DAC_SUPPORTED 1 +#define CONFIG_SOC_UART_SUPPORTED 1 +#define CONFIG_SOC_MCPWM_SUPPORTED 1 +#define CONFIG_SOC_GPTIMER_SUPPORTED 1 +#define CONFIG_SOC_SDMMC_HOST_SUPPORTED 1 +#define CONFIG_SOC_BT_SUPPORTED 1 +#define CONFIG_SOC_PCNT_SUPPORTED 1 +#define CONFIG_SOC_WIFI_SUPPORTED 1 +#define CONFIG_SOC_SDIO_SLAVE_SUPPORTED 1 +#define CONFIG_SOC_TWAI_SUPPORTED 1 +#define CONFIG_SOC_EMAC_SUPPORTED 1 +#define CONFIG_SOC_ULP_SUPPORTED 1 +#define CONFIG_SOC_CCOMP_TIMER_SUPPORTED 1 +#define CONFIG_SOC_RTC_FAST_MEM_SUPPORTED 1 +#define CONFIG_SOC_RTC_SLOW_MEM_SUPPORTED 1 +#define CONFIG_SOC_RTC_MEM_SUPPORTED 1 +#define CONFIG_SOC_I2S_SUPPORTED 1 +#define CONFIG_SOC_RMT_SUPPORTED 1 +#define CONFIG_SOC_SDM_SUPPORTED 1 +#define CONFIG_SOC_GPSPI_SUPPORTED 1 +#define CONFIG_SOC_LEDC_SUPPORTED 1 +#define CONFIG_SOC_I2C_SUPPORTED 1 +#define CONFIG_SOC_SUPPORT_COEXISTENCE 1 +#define CONFIG_SOC_AES_SUPPORTED 1 +#define CONFIG_SOC_MPI_SUPPORTED 1 +#define CONFIG_SOC_SHA_SUPPORTED 1 +#define CONFIG_SOC_FLASH_ENC_SUPPORTED 1 +#define CONFIG_SOC_SECURE_BOOT_SUPPORTED 1 +#define CONFIG_SOC_TOUCH_SENSOR_SUPPORTED 1 +#define CONFIG_SOC_BOD_SUPPORTED 1 +#define CONFIG_SOC_ULP_FSM_SUPPORTED 1 +#define CONFIG_SOC_DPORT_WORKAROUND_DIS_INTERRUPT_LVL 5 +#define CONFIG_SOC_XTAL_SUPPORT_26M 1 +#define CONFIG_SOC_XTAL_SUPPORT_40M 1 +#define CONFIG_SOC_XTAL_SUPPORT_AUTO_DETECT 1 +#define CONFIG_SOC_ADC_RTC_CTRL_SUPPORTED 1 +#define CONFIG_SOC_ADC_DIG_CTRL_SUPPORTED 1 +#define CONFIG_SOC_ADC_DMA_SUPPORTED 1 +#define CONFIG_SOC_ADC_PERIPH_NUM 2 +#define CONFIG_SOC_ADC_MAX_CHANNEL_NUM 10 +#define CONFIG_SOC_ADC_ATTEN_NUM 4 +#define CONFIG_SOC_ADC_DIGI_CONTROLLER_NUM 2 +#define CONFIG_SOC_ADC_PATT_LEN_MAX 16 +#define CONFIG_SOC_ADC_DIGI_MIN_BITWIDTH 9 +#define CONFIG_SOC_ADC_DIGI_MAX_BITWIDTH 12 +#define CONFIG_SOC_ADC_DIGI_RESULT_BYTES 2 +#define CONFIG_SOC_ADC_DIGI_DATA_BYTES_PER_CONV 4 +#define CONFIG_SOC_ADC_SAMPLE_FREQ_THRES_HIGH 2 +#define CONFIG_SOC_ADC_SAMPLE_FREQ_THRES_LOW 20 +#define CONFIG_SOC_ADC_RTC_MIN_BITWIDTH 9 +#define CONFIG_SOC_ADC_RTC_MAX_BITWIDTH 12 +#define CONFIG_SOC_SHARED_IDCACHE_SUPPORTED 1 +#define CONFIG_SOC_IDCACHE_PER_CORE 1 +#define CONFIG_SOC_CPU_CORES_NUM 2 +#define CONFIG_SOC_CPU_INTR_NUM 32 +#define CONFIG_SOC_CPU_HAS_FPU 1 +#define CONFIG_SOC_CPU_BREAKPOINTS_NUM 2 +#define CONFIG_SOC_CPU_WATCHPOINTS_NUM 2 +#define CONFIG_SOC_CPU_WATCHPOINT_MAX_REGION_SIZE 64 +#define CONFIG_SOC_DAC_CHAN_NUM 2 +#define CONFIG_SOC_DAC_RESOLUTION 8 +#define CONFIG_SOC_DAC_DMA_16BIT_ALIGN 1 +#define CONFIG_SOC_GPIO_PORT 1 +#define CONFIG_SOC_GPIO_PIN_COUNT 40 +#define CONFIG_SOC_GPIO_VALID_GPIO_MASK 0xFFFFFFFFFF +#define CONFIG_SOC_GPIO_VALID_DIGITAL_IO_PAD_MASK 0xEF0FEA +#define CONFIG_SOC_I2C_NUM 2 +#define CONFIG_SOC_I2C_FIFO_LEN 32 +#define CONFIG_SOC_I2C_CMD_REG_NUM 16 +#define CONFIG_SOC_I2C_SUPPORT_SLAVE 1 +#define CONFIG_SOC_I2C_SUPPORT_APB 1 +#define CONFIG_SOC_I2S_NUM 2 +#define CONFIG_SOC_I2S_HW_VERSION_1 1 +#define CONFIG_SOC_I2S_SUPPORTS_APLL 1 +#define CONFIG_SOC_I2S_SUPPORTS_PLL_F160M 1 +#define CONFIG_SOC_I2S_SUPPORTS_PDM 1 +#define CONFIG_SOC_I2S_SUPPORTS_PDM_TX 1 +#define CONFIG_SOC_I2S_PDM_MAX_TX_LINES 1 +#define CONFIG_SOC_I2S_SUPPORTS_PDM_RX 1 +#define CONFIG_SOC_I2S_PDM_MAX_RX_LINES 1 +#define CONFIG_SOC_I2S_SUPPORTS_ADC_DAC 1 +#define CONFIG_SOC_I2S_SUPPORTS_ADC 1 +#define CONFIG_SOC_I2S_SUPPORTS_DAC 1 +#define CONFIG_SOC_I2S_SUPPORTS_LCD_CAMERA 1 +#define CONFIG_SOC_I2S_TRANS_SIZE_ALIGN_WORD 1 +#define CONFIG_SOC_I2S_LCD_I80_VARIANT 1 +#define CONFIG_SOC_LCD_I80_SUPPORTED 1 +#define CONFIG_SOC_LCD_I80_BUSES 2 +#define CONFIG_SOC_LCD_I80_BUS_WIDTH 24 +#define CONFIG_SOC_LEDC_HAS_TIMER_SPECIFIC_MUX 1 +#define CONFIG_SOC_LEDC_SUPPORT_APB_CLOCK 1 +#define CONFIG_SOC_LEDC_SUPPORT_REF_TICK 1 +#define CONFIG_SOC_LEDC_SUPPORT_HS_MODE 1 +#define CONFIG_SOC_LEDC_CHANNEL_NUM 8 +#define CONFIG_SOC_LEDC_TIMER_BIT_WIDTH 20 +#define CONFIG_SOC_MCPWM_GROUPS 2 +#define CONFIG_SOC_MCPWM_TIMERS_PER_GROUP 3 +#define CONFIG_SOC_MCPWM_OPERATORS_PER_GROUP 3 +#define CONFIG_SOC_MCPWM_COMPARATORS_PER_OPERATOR 2 +#define CONFIG_SOC_MCPWM_GENERATORS_PER_OPERATOR 2 +#define CONFIG_SOC_MCPWM_TRIGGERS_PER_OPERATOR 2 +#define CONFIG_SOC_MCPWM_GPIO_FAULTS_PER_GROUP 3 +#define CONFIG_SOC_MCPWM_CAPTURE_TIMERS_PER_GROUP 1 +#define CONFIG_SOC_MCPWM_CAPTURE_CHANNELS_PER_TIMER 3 +#define CONFIG_SOC_MCPWM_GPIO_SYNCHROS_PER_GROUP 3 +#define CONFIG_SOC_MMU_PERIPH_NUM 2 +#define CONFIG_SOC_MMU_LINEAR_ADDRESS_REGION_NUM 3 +#define CONFIG_SOC_MPU_MIN_REGION_SIZE 0x20000000 +#define CONFIG_SOC_MPU_REGIONS_MAX_NUM 8 +#define CONFIG_SOC_PCNT_GROUPS 1 +#define CONFIG_SOC_PCNT_UNITS_PER_GROUP 8 +#define CONFIG_SOC_PCNT_CHANNELS_PER_UNIT 2 +#define CONFIG_SOC_PCNT_THRES_POINT_PER_UNIT 2 +#define CONFIG_SOC_RMT_GROUPS 1 +#define CONFIG_SOC_RMT_TX_CANDIDATES_PER_GROUP 8 +#define CONFIG_SOC_RMT_RX_CANDIDATES_PER_GROUP 8 +#define CONFIG_SOC_RMT_CHANNELS_PER_GROUP 8 +#define CONFIG_SOC_RMT_MEM_WORDS_PER_CHANNEL 64 +#define CONFIG_SOC_RMT_SUPPORT_REF_TICK 1 +#define CONFIG_SOC_RMT_SUPPORT_APB 1 +#define CONFIG_SOC_RMT_CHANNEL_CLK_INDEPENDENT 1 +#define CONFIG_SOC_RTCIO_PIN_COUNT 18 +#define CONFIG_SOC_RTCIO_INPUT_OUTPUT_SUPPORTED 1 +#define CONFIG_SOC_RTCIO_HOLD_SUPPORTED 1 +#define CONFIG_SOC_RTCIO_WAKE_SUPPORTED 1 +#define CONFIG_SOC_SDM_GROUPS 1 +#define CONFIG_SOC_SDM_CHANNELS_PER_GROUP 8 +#define CONFIG_SOC_SDM_CLK_SUPPORT_APB 1 +#define CONFIG_SOC_SPI_HD_BOTH_INOUT_SUPPORTED 1 +#define CONFIG_SOC_SPI_AS_CS_SUPPORTED 1 +#define CONFIG_SOC_SPI_PERIPH_NUM 3 +#define CONFIG_SOC_SPI_DMA_CHAN_NUM 2 +#define CONFIG_SOC_SPI_MAX_CS_NUM 3 +#define CONFIG_SOC_SPI_SUPPORT_CLK_APB 1 +#define CONFIG_SOC_SPI_MAXIMUM_BUFFER_SIZE 64 +#define CONFIG_SOC_SPI_MAX_PRE_DIVIDER 8192 +#define CONFIG_SOC_MEMSPI_SRC_FREQ_80M_SUPPORTED 1 +#define CONFIG_SOC_MEMSPI_SRC_FREQ_40M_SUPPORTED 1 +#define CONFIG_SOC_MEMSPI_SRC_FREQ_26M_SUPPORTED 1 +#define CONFIG_SOC_MEMSPI_SRC_FREQ_20M_SUPPORTED 1 +#define CONFIG_SOC_TIMER_GROUPS 2 +#define CONFIG_SOC_TIMER_GROUP_TIMERS_PER_GROUP 2 +#define CONFIG_SOC_TIMER_GROUP_COUNTER_BIT_WIDTH 64 +#define CONFIG_SOC_TIMER_GROUP_TOTAL_TIMERS 4 +#define CONFIG_SOC_TIMER_GROUP_SUPPORT_APB 1 +#define CONFIG_SOC_TOUCH_VERSION_1 1 +#define CONFIG_SOC_TOUCH_SENSOR_NUM 10 +#define CONFIG_SOC_TOUCH_PAD_MEASURE_WAIT_MAX 0xFF +#define CONFIG_SOC_TWAI_CONTROLLER_NUM 1 +#define CONFIG_SOC_TWAI_BRP_MIN 2 +#define CONFIG_SOC_TWAI_CLK_SUPPORT_APB 1 +#define CONFIG_SOC_TWAI_SUPPORT_MULTI_ADDRESS_LAYOUT 1 +#define CONFIG_SOC_UART_NUM 3 +#define CONFIG_SOC_UART_SUPPORT_APB_CLK 1 +#define CONFIG_SOC_UART_SUPPORT_REF_TICK 1 +#define CONFIG_SOC_UART_FIFO_LEN 128 +#define CONFIG_SOC_UART_BITRATE_MAX 5000000 +#define CONFIG_SOC_SPIRAM_SUPPORTED 1 +#define CONFIG_SOC_SPI_MEM_SUPPORT_CONFIG_GPIO_BY_EFUSE 1 +#define CONFIG_SOC_SHA_SUPPORT_PARALLEL_ENG 1 +#define CONFIG_SOC_SHA_SUPPORT_SHA1 1 +#define CONFIG_SOC_SHA_SUPPORT_SHA256 1 +#define CONFIG_SOC_SHA_SUPPORT_SHA384 1 +#define CONFIG_SOC_SHA_SUPPORT_SHA512 1 +#define CONFIG_SOC_RSA_MAX_BIT_LEN 4096 +#define CONFIG_SOC_AES_SUPPORT_AES_128 1 +#define CONFIG_SOC_AES_SUPPORT_AES_192 1 +#define CONFIG_SOC_AES_SUPPORT_AES_256 1 +#define CONFIG_SOC_SECURE_BOOT_V1 1 +#define CONFIG_SOC_EFUSE_SECURE_BOOT_KEY_DIGESTS 1 +#define CONFIG_SOC_FLASH_ENCRYPTED_XTS_AES_BLOCK_MAX 32 +#define CONFIG_SOC_PHY_DIG_REGS_MEM_SIZE 21 +#define CONFIG_SOC_PM_SUPPORT_EXT0_WAKEUP 1 +#define CONFIG_SOC_PM_SUPPORT_EXT1_WAKEUP 1 +#define CONFIG_SOC_PM_SUPPORT_EXT_WAKEUP 1 +#define CONFIG_SOC_PM_SUPPORT_TOUCH_SENSOR_WAKEUP 1 +#define CONFIG_SOC_PM_SUPPORT_RTC_PERIPH_PD 1 +#define CONFIG_SOC_PM_SUPPORT_RTC_FAST_MEM_PD 1 +#define CONFIG_SOC_PM_SUPPORT_RTC_SLOW_MEM_PD 1 +#define CONFIG_SOC_PM_SUPPORT_RC_FAST_PD 1 +#define CONFIG_SOC_PM_SUPPORT_VDDSDIO_PD 1 +#define CONFIG_SOC_PM_SUPPORT_MODEM_PD 1 +#define CONFIG_SOC_CONFIGURABLE_VDDSDIO_SUPPORTED 1 +#define CONFIG_SOC_CLK_APLL_SUPPORTED 1 +#define CONFIG_SOC_APLL_MULTIPLIER_OUT_MIN_HZ 350000000 +#define CONFIG_SOC_APLL_MULTIPLIER_OUT_MAX_HZ 500000000 +#define CONFIG_SOC_APLL_MIN_HZ 5303031 +#define CONFIG_SOC_APLL_MAX_HZ 125000000 +#define CONFIG_SOC_CLK_RC_FAST_D256_SUPPORTED 1 +#define CONFIG_SOC_RTC_SLOW_CLK_SUPPORT_RC_FAST_D256 1 +#define CONFIG_SOC_CLK_RC_FAST_SUPPORT_CALIBRATION 1 +#define CONFIG_SOC_CLK_XTAL32K_SUPPORTED 1 +#define CONFIG_SOC_SDMMC_USE_IOMUX 1 +#define CONFIG_SOC_SDMMC_NUM_SLOTS 2 +#define CONFIG_SOC_WIFI_WAPI_SUPPORT 1 +#define CONFIG_SOC_WIFI_CSI_SUPPORT 1 +#define CONFIG_SOC_WIFI_MESH_SUPPORT 1 +#define CONFIG_SOC_WIFI_SUPPORT_VARIABLE_BEACON_WINDOW 1 +#define CONFIG_SOC_WIFI_NAN_SUPPORT 1 +#define CONFIG_SOC_BLE_SUPPORTED 1 +#define CONFIG_SOC_BLE_MESH_SUPPORTED 1 +#define CONFIG_SOC_BT_CLASSIC_SUPPORTED 1 +#define CONFIG_SOC_BLUFI_SUPPORTED 1 +#define CONFIG_SOC_ULP_HAS_ADC 1 +#define CONFIG_SOC_PHY_COMBO_MODULE 1 +#define CONFIG_IDF_CMAKE 1 +#define CONFIG_IDF_TARGET_ARCH_XTENSA 1 +#define CONFIG_IDF_TARGET_ARCH "xtensa" +#define CONFIG_IDF_TARGET "esp32" +#define CONFIG_IDF_TARGET_ESP32 1 +#define CONFIG_IDF_FIRMWARE_CHIP_ID 0x0000 +#define CONFIG_APP_BUILD_TYPE_APP_2NDBOOT 1 +#define CONFIG_APP_BUILD_GENERATE_BINARIES 1 +#define CONFIG_APP_BUILD_BOOTLOADER 1 +#define CONFIG_APP_BUILD_USE_FLASH_SECTIONS 1 +#define CONFIG_BOOTLOADER_OFFSET_IN_FLASH 0x1000 +#define CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_SIZE 1 +#define CONFIG_BOOTLOADER_LOG_LEVEL_INFO 1 +#define CONFIG_BOOTLOADER_LOG_LEVEL 3 +#define CONFIG_BOOTLOADER_VDDSDIO_BOOST_1_9V 1 +#define CONFIG_BOOTLOADER_REGION_PROTECTION_ENABLE 1 +#define CONFIG_BOOTLOADER_WDT_ENABLE 1 +#define CONFIG_BOOTLOADER_WDT_TIME_MS 9000 +#define CONFIG_BOOTLOADER_RESERVE_RTC_SIZE 0x0 +#define CONFIG_BOOTLOADER_FLASH_XMC_SUPPORT 1 +#define CONFIG_SECURE_BOOT_V1_SUPPORTED 1 +#define CONFIG_APP_COMPILE_TIME_DATE 1 +#define CONFIG_APP_RETRIEVE_LEN_ELF_SHA 16 +#define CONFIG_ESP_ROM_HAS_CRC_LE 1 +#define CONFIG_ESP_ROM_HAS_CRC_BE 1 +#define CONFIG_ESP_ROM_HAS_MZ_CRC32 1 +#define CONFIG_ESP_ROM_HAS_JPEG_DECODE 1 +#define CONFIG_ESP_ROM_HAS_UART_BUF_SWITCH 1 +#define CONFIG_ESP_ROM_NEEDS_SWSETUP_WORKAROUND 1 +#define CONFIG_ESP_ROM_HAS_NEWLIB_NANO_FORMAT 1 +#define CONFIG_ESPTOOLPY_FLASHMODE_DIO 1 +#define CONFIG_ESPTOOLPY_FLASH_SAMPLE_MODE_STR 1 +#define CONFIG_ESPTOOLPY_FLASHMODE "dio" +#define CONFIG_ESPTOOLPY_FLASHFREQ_40M 1 +#define CONFIG_ESPTOOLPY_FLASHFREQ "40m" +#define CONFIG_ESPTOOLPY_FLASHSIZE_2MB 1 +#define CONFIG_ESPTOOLPY_FLASHSIZE "2MB" +#define CONFIG_ESPTOOLPY_BEFORE_RESET 1 +#define CONFIG_ESPTOOLPY_BEFORE "default_reset" +#define CONFIG_ESPTOOLPY_AFTER_RESET 1 +#define CONFIG_ESPTOOLPY_AFTER "hard_reset" +#define CONFIG_ESPTOOLPY_MONITOR_BAUD 115200 +#define CONFIG_PARTITION_TABLE_SINGLE_APP 1 +#define CONFIG_PARTITION_TABLE_CUSTOM_FILENAME "partitions.csv" +#define CONFIG_PARTITION_TABLE_FILENAME "partitions_singleapp.csv" +#define CONFIG_PARTITION_TABLE_OFFSET 0x8000 +#define CONFIG_PARTITION_TABLE_MD5 1 +#define CONFIG_COMPILER_OPTIMIZATION_SIZE 1 +#define CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_ENABLE 1 +#define CONFIG_COMPILER_FLOAT_LIB_FROM_GCCLIB 1 +#define CONFIG_COMPILER_OPTIMIZATION_ASSERTION_LEVEL 2 +#define CONFIG_COMPILER_HIDE_PATHS_MACROS 1 +#define CONFIG_COMPILER_STACK_CHECK_MODE_NONE 1 +#define CONFIG_APPTRACE_DEST_NONE 1 +#define CONFIG_APPTRACE_DEST_UART_NONE 1 +#define CONFIG_APPTRACE_UART_TASK_PRIO 1 +#define CONFIG_APPTRACE_LOCK_ENABLE 1 +#define CONFIG_BT_ENABLED 1 +#define CONFIG_BT_BLUEDROID_ENABLED 1 +#define CONFIG_BT_CONTROLLER_ENABLED 1 +#define CONFIG_BT_BTC_TASK_STACK_SIZE 3072 +#define CONFIG_BT_BLUEDROID_PINNED_TO_CORE_0 1 +#define CONFIG_BT_BLUEDROID_PINNED_TO_CORE 0 +#define CONFIG_BT_BTU_TASK_STACK_SIZE 4096 +#define CONFIG_BT_BLE_ENABLED 1 +#define CONFIG_BT_GATTS_ENABLE 1 +#define CONFIG_BT_GATT_MAX_SR_PROFILES 8 +#define CONFIG_BT_GATT_MAX_SR_ATTRIBUTES 100 +#define CONFIG_BT_GATTS_SEND_SERVICE_CHANGE_AUTO 1 +#define CONFIG_BT_GATTS_SEND_SERVICE_CHANGE_MODE 0 +#define CONFIG_BT_GATTC_ENABLE 1 +#define CONFIG_BT_GATTC_MAX_CACHE_CHAR 40 +#define CONFIG_BT_GATTC_NOTIF_REG_MAX 5 +#define CONFIG_BT_GATTC_CONNECT_RETRY_COUNT 3 +#define CONFIG_BT_BLE_SMP_ENABLE 1 +#define CONFIG_BT_LOG_HCI_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_HCI_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_BTM_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_BTM_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_L2CAP_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_L2CAP_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_RFCOMM_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_RFCOMM_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_SDP_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_SDP_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_GAP_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_GAP_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_BNEP_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_BNEP_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_PAN_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_PAN_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_A2D_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_A2D_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_AVDT_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_AVDT_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_AVCT_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_AVCT_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_AVRC_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_AVRC_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_MCA_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_MCA_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_HID_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_HID_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_APPL_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_APPL_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_GATT_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_GATT_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_SMP_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_SMP_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_BTIF_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_BTIF_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_BTC_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_BTC_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_OSI_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_OSI_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_BLUFI_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_BLUFI_TRACE_LEVEL 2 +#define CONFIG_BT_ACL_CONNECTIONS 4 +#define CONFIG_BT_MULTI_CONNECTION_ENBALE 1 +#define CONFIG_BT_SMP_ENABLE 1 +#define CONFIG_BT_BLE_ESTAB_LINK_CONN_TOUT 30 +#define CONFIG_BT_MAX_DEVICE_NAME_LEN 32 +#define CONFIG_BT_BLE_RPA_TIMEOUT 900 +#define CONFIG_BTDM_CTRL_MODE_BLE_ONLY 1 +#define CONFIG_BTDM_CTRL_BLE_MAX_CONN 3 +#define CONFIG_BTDM_CTRL_BR_EDR_SCO_DATA_PATH_EFF 0 +#define CONFIG_BTDM_CTRL_PCM_ROLE_EFF 0 +#define CONFIG_BTDM_CTRL_PCM_POLAR_EFF 0 +#define CONFIG_BTDM_CTRL_BLE_MAX_CONN_EFF 3 +#define CONFIG_BTDM_CTRL_BR_EDR_MAX_ACL_CONN_EFF 0 +#define CONFIG_BTDM_CTRL_BR_EDR_MAX_SYNC_CONN_EFF 0 +#define CONFIG_BTDM_CTRL_PINNED_TO_CORE_0 1 +#define CONFIG_BTDM_CTRL_PINNED_TO_CORE 0 +#define CONFIG_BTDM_CTRL_HCI_MODE_VHCI 1 +#define CONFIG_BTDM_CTRL_MODEM_SLEEP 1 +#define CONFIG_BTDM_CTRL_MODEM_SLEEP_MODE_ORIG 1 +#define CONFIG_BTDM_CTRL_LPCLK_SEL_MAIN_XTAL 1 +#define CONFIG_BTDM_BLE_DEFAULT_SCA_250PPM 1 +#define CONFIG_BTDM_BLE_SLEEP_CLOCK_ACCURACY_INDEX_EFF 1 +#define CONFIG_BTDM_BLE_SCAN_DUPL 1 +#define CONFIG_BTDM_SCAN_DUPL_TYPE_DEVICE 1 +#define CONFIG_BTDM_SCAN_DUPL_TYPE 0 +#define CONFIG_BTDM_SCAN_DUPL_CACHE_SIZE 100 +#define CONFIG_BTDM_SCAN_DUPL_CACHE_REFRESH_PERIOD 0 +#define CONFIG_BTDM_CTRL_FULL_SCAN_SUPPORTED 1 +#define CONFIG_BTDM_BLE_ADV_REPORT_FLOW_CTRL_SUPP 1 +#define CONFIG_BTDM_BLE_ADV_REPORT_FLOW_CTRL_NUM 100 +#define CONFIG_BTDM_BLE_ADV_REPORT_DISCARD_THRSHOLD 20 +#define CONFIG_BTDM_RESERVE_DRAM 0xdb5c +#define CONFIG_BTDM_CTRL_HLI 1 +#define CONFIG_ADC_DISABLE_DAC 1 +#define CONFIG_ADC_CAL_EFUSE_TP_ENABLE 1 +#define CONFIG_ADC_CAL_EFUSE_VREF_ENABLE 1 +#define CONFIG_ADC_CAL_LUT_ENABLE 1 +#define CONFIG_SPI_MASTER_ISR_IN_IRAM 1 +#define CONFIG_SPI_SLAVE_ISR_IN_IRAM 1 +#define CONFIG_TWAI_ERRATA_FIX_BUS_OFF_REC 1 +#define CONFIG_TWAI_ERRATA_FIX_TX_INTR_LOST 1 +#define CONFIG_TWAI_ERRATA_FIX_RX_FRAME_INVALID 1 +#define CONFIG_TWAI_ERRATA_FIX_RX_FIFO_CORRUPT 1 +#define CONFIG_TWAI_ERRATA_FIX_LISTEN_ONLY_DOM 1 +#define CONFIG_GPTIMER_ISR_HANDLER_IN_IRAM 1 +#define CONFIG_DAC_DMA_AUTO_16BIT_ALIGN 1 +#define CONFIG_EFUSE_CODE_SCHEME_COMPAT_3_4 1 +#define CONFIG_EFUSE_MAX_BLK_LEN 192 +#define CONFIG_ESP_TLS_USING_MBEDTLS 1 +#define CONFIG_ADC_CALI_EFUSE_TP_ENABLE 1 +#define CONFIG_ADC_CALI_EFUSE_VREF_ENABLE 1 +#define CONFIG_ADC_CALI_LUT_ENABLE 1 +#define CONFIG_ADC_DISABLE_DAC_OUTPUT 1 +#define CONFIG_ESP_COEX_SW_COEXIST_ENABLE 1 +#define CONFIG_ESP_ERR_TO_NAME_LOOKUP 1 +#define CONFIG_ETH_ENABLED 1 +#define CONFIG_ETH_USE_ESP32_EMAC 1 +#define CONFIG_ETH_PHY_INTERFACE_RMII 1 +#define CONFIG_ETH_RMII_CLK_INPUT 1 +#define CONFIG_ETH_RMII_CLK_IN_GPIO 0 +#define CONFIG_ETH_DMA_BUFFER_SIZE 512 +#define CONFIG_ETH_DMA_RX_BUFFER_NUM 10 +#define CONFIG_ETH_DMA_TX_BUFFER_NUM 10 +#define CONFIG_ETH_USE_SPI_ETHERNET 1 +#define CONFIG_ESP_EVENT_POST_FROM_ISR 1 +#define CONFIG_ESP_EVENT_POST_FROM_IRAM_ISR 1 +#define CONFIG_ESP_HTTP_CLIENT_ENABLE_HTTPS 1 +#define CONFIG_HTTPD_MAX_REQ_HDR_LEN 512 +#define CONFIG_HTTPD_MAX_URI_LEN 512 +#define CONFIG_HTTPD_ERR_RESP_NO_DELAY 1 +#define CONFIG_HTTPD_PURGE_BUF_LEN 32 +#define CONFIG_ESP32_REV_MIN_0 1 +#define CONFIG_ESP32_REV_MIN 0 +#define CONFIG_ESP32_REV_MIN_FULL 0 +#define CONFIG_ESP_REV_MIN_FULL 0 +#define CONFIG_ESP32_REV_MAX_FULL 399 +#define CONFIG_ESP_REV_MAX_FULL 399 +#define CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_STA 1 +#define CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_AP 1 +#define CONFIG_ESP_MAC_ADDR_UNIVERSE_BT 1 +#define CONFIG_ESP_MAC_ADDR_UNIVERSE_ETH 1 +#define CONFIG_ESP_MAC_UNIVERSAL_MAC_ADDRESSES_FOUR 1 +#define CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES_FOUR 1 +#define CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES 4 +#define CONFIG_ESP_SLEEP_FLASH_LEAKAGE_WORKAROUND 1 +#define CONFIG_ESP_SLEEP_RTC_BUS_ISO_WORKAROUND 1 +#define CONFIG_ESP_SLEEP_WAIT_FLASH_READY_EXTRA_DELAY 2000 +#define CONFIG_ESP_SLEEP_GPIO_ENABLE_INTERNAL_RESISTORS 1 +#define CONFIG_RTC_CLK_SRC_INT_RC 1 +#define CONFIG_RTC_CLK_CAL_CYCLES 1024 +#define CONFIG_PERIPH_CTRL_FUNC_IN_IRAM 1 +#define CONFIG_XTAL_FREQ_40 1 +#define CONFIG_XTAL_FREQ 40 +#define CONFIG_LCD_PANEL_IO_FORMAT_BUF_SIZE 32 +#define CONFIG_ESP_NETIF_IP_LOST_TIMER_INTERVAL 120 +#define CONFIG_ESP_NETIF_TCPIP_LWIP 1 +#define CONFIG_ESP_NETIF_USES_TCPIP_WITH_BSD_API 1 +#define CONFIG_ESP_PHY_CALIBRATION_AND_DATA_STORAGE 1 +#define CONFIG_ESP_PHY_MAX_WIFI_TX_POWER 20 +#define CONFIG_ESP_PHY_MAX_TX_POWER 20 +#define CONFIG_ESP_PHY_RF_CAL_PARTIAL 1 +#define CONFIG_ESP_PHY_CALIBRATION_MODE 0 +#define CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ_160 1 +#define CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ 160 +#define CONFIG_ESP_SYSTEM_PANIC_PRINT_REBOOT 1 +#define CONFIG_ESP_SYSTEM_PANIC_REBOOT_DELAY_SECONDS 0 +#define CONFIG_ESP_SYSTEM_EVENT_QUEUE_SIZE 32 +#define CONFIG_ESP_SYSTEM_EVENT_TASK_STACK_SIZE 2304 +#define CONFIG_ESP_MAIN_TASK_STACK_SIZE 3584 +#define CONFIG_ESP_MAIN_TASK_AFFINITY_CPU0 1 +#define CONFIG_ESP_MAIN_TASK_AFFINITY 0x0 +#define CONFIG_ESP_MINIMAL_SHARED_STACK_SIZE 2048 +#define CONFIG_ESP_CONSOLE_UART_DEFAULT 1 +#define CONFIG_ESP_CONSOLE_UART 1 +#define CONFIG_ESP_CONSOLE_MULTIPLE_UART 1 +#define CONFIG_ESP_CONSOLE_UART_NUM 0 +#define CONFIG_ESP_CONSOLE_UART_BAUDRATE 115200 +#define CONFIG_ESP_INT_WDT 1 +#define CONFIG_ESP_INT_WDT_TIMEOUT_MS 300 +#define CONFIG_ESP_INT_WDT_CHECK_CPU1 1 +#define CONFIG_ESP_TASK_WDT_EN 1 +#define CONFIG_ESP_TASK_WDT_INIT 1 +#define CONFIG_ESP_TASK_WDT_TIMEOUT_S 5 +#define CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU0 1 +#define CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU1 1 +#define CONFIG_ESP_DEBUG_OCDAWARE 1 +#define CONFIG_ESP_SYSTEM_CHECK_INT_LEVEL_5 1 +#define CONFIG_ESP_BROWNOUT_DET 1 +#define CONFIG_ESP_BROWNOUT_DET_LVL_SEL_0 1 +#define CONFIG_ESP_BROWNOUT_DET_LVL 0 +#define CONFIG_ESP_SYSTEM_BROWNOUT_INTR 1 +#define CONFIG_ESP_IPC_TASK_STACK_SIZE 1024 +#define CONFIG_ESP_IPC_USES_CALLERS_PRIORITY 1 +#define CONFIG_ESP_IPC_ISR_ENABLE 1 +#define CONFIG_ESP_TIME_FUNCS_USE_RTC_TIMER 1 +#define CONFIG_ESP_TIME_FUNCS_USE_ESP_TIMER 1 +#define CONFIG_ESP_TIMER_TASK_STACK_SIZE 3584 +#define CONFIG_ESP_TIMER_INTERRUPT_LEVEL 1 +#define CONFIG_ESP_TIMER_TASK_AFFINITY 0x0 +#define CONFIG_ESP_TIMER_TASK_AFFINITY_CPU0 1 +#define CONFIG_ESP_TIMER_ISR_AFFINITY 0x1 +#define CONFIG_ESP_TIMER_ISR_AFFINITY_CPU0 1 +#define CONFIG_ESP_TIMER_IMPL_TG0_LAC 1 +#define CONFIG_ESP_WIFI_ENABLED 1 +#define CONFIG_ESP_WIFI_STATIC_RX_BUFFER_NUM 10 +#define CONFIG_ESP_WIFI_DYNAMIC_RX_BUFFER_NUM 32 +#define CONFIG_ESP_WIFI_DYNAMIC_TX_BUFFER 1 +#define CONFIG_ESP_WIFI_TX_BUFFER_TYPE 1 +#define CONFIG_ESP_WIFI_DYNAMIC_TX_BUFFER_NUM 32 +#define CONFIG_ESP_WIFI_STATIC_RX_MGMT_BUFFER 1 +#define CONFIG_ESP_WIFI_DYNAMIC_RX_MGMT_BUF 0 +#define CONFIG_ESP_WIFI_RX_MGMT_BUF_NUM_DEF 5 +#define CONFIG_ESP_WIFI_AMPDU_TX_ENABLED 1 +#define CONFIG_ESP_WIFI_TX_BA_WIN 6 +#define CONFIG_ESP_WIFI_AMPDU_RX_ENABLED 1 +#define CONFIG_ESP_WIFI_RX_BA_WIN 6 +#define CONFIG_ESP_WIFI_NVS_ENABLED 1 +#define CONFIG_ESP_WIFI_TASK_PINNED_TO_CORE_0 1 +#define CONFIG_ESP_WIFI_SOFTAP_BEACON_MAX_LEN 752 +#define CONFIG_ESP_WIFI_MGMT_SBUF_NUM 32 +#define CONFIG_ESP_WIFI_IRAM_OPT 1 +#define CONFIG_ESP_WIFI_RX_IRAM_OPT 1 +#define CONFIG_ESP_WIFI_ENABLE_WPA3_SAE 1 +#define CONFIG_ESP_WIFI_ENABLE_SAE_PK 1 +#define CONFIG_ESP_WIFI_SOFTAP_SAE_SUPPORT 1 +#define CONFIG_ESP_WIFI_STA_DISCONNECTED_PM_ENABLE 1 +#define CONFIG_ESP_WIFI_SOFTAP_SUPPORT 1 +#define CONFIG_ESP_WIFI_ESPNOW_MAX_ENCRYPT_NUM 7 +#define CONFIG_ESP_WIFI_MBEDTLS_CRYPTO 1 +#define CONFIG_ESP_WIFI_ENTERPRISE_SUPPORT 1 +#define CONFIG_ESP_COREDUMP_ENABLE_TO_NONE 1 +#define CONFIG_FATFS_VOLUME_COUNT 2 +#define CONFIG_FATFS_LFN_NONE 1 +#define CONFIG_FATFS_SECTOR_4096 1 +#define CONFIG_FATFS_CODEPAGE_437 1 +#define CONFIG_FATFS_CODEPAGE 437 +#define CONFIG_FATFS_FS_LOCK 0 +#define CONFIG_FATFS_TIMEOUT_MS 10000 +#define CONFIG_FATFS_PER_FILE_CACHE 1 +#define CONFIG_FATFS_VFS_FSTAT_BLKSIZE 0 +#define CONFIG_FREERTOS_HZ 100 +#define CONFIG_FREERTOS_CHECK_STACKOVERFLOW_CANARY 1 +#define CONFIG_FREERTOS_THREAD_LOCAL_STORAGE_POINTERS 1 +#define CONFIG_FREERTOS_IDLE_TASK_STACKSIZE 1536 +#define CONFIG_FREERTOS_MAX_TASK_NAME_LEN 16 +#define CONFIG_FREERTOS_TIMER_TASK_PRIORITY 1 +#define CONFIG_FREERTOS_TIMER_TASK_STACK_DEPTH 2048 +#define CONFIG_FREERTOS_TIMER_QUEUE_LENGTH 10 +#define CONFIG_FREERTOS_QUEUE_REGISTRY_SIZE 0 +#define CONFIG_FREERTOS_TASK_NOTIFICATION_ARRAY_ENTRIES 1 +#define CONFIG_FREERTOS_TLSP_DELETION_CALLBACKS 1 +#define CONFIG_FREERTOS_CHECK_MUTEX_GIVEN_BY_OWNER 1 +#define CONFIG_FREERTOS_ISR_STACKSIZE 1536 +#define CONFIG_FREERTOS_INTERRUPT_BACKTRACE 1 +#define CONFIG_FREERTOS_TICK_SUPPORT_CORETIMER 1 +#define CONFIG_FREERTOS_CORETIMER_0 1 +#define CONFIG_FREERTOS_SYSTICK_USES_CCOUNT 1 +#define CONFIG_FREERTOS_ENABLE_TASK_SNAPSHOT 1 +#define CONFIG_FREERTOS_NO_AFFINITY 0x7FFFFFFF +#define CONFIG_FREERTOS_SUPPORT_STATIC_ALLOCATION 1 +#define CONFIG_FREERTOS_DEBUG_OCDAWARE 1 +#define CONFIG_HAL_ASSERTION_EQUALS_SYSTEM 1 +#define CONFIG_HAL_DEFAULT_ASSERTION_LEVEL 2 +#define CONFIG_HAL_SPI_MASTER_FUNC_IN_IRAM 1 +#define CONFIG_HAL_SPI_SLAVE_FUNC_IN_IRAM 1 +#define CONFIG_HEAP_POISONING_DISABLED 1 +#define CONFIG_HEAP_TRACING_OFF 1 +#define CONFIG_LOG_DEFAULT_LEVEL_INFO 1 +#define CONFIG_LOG_DEFAULT_LEVEL 3 +#define CONFIG_LOG_MAXIMUM_EQUALS_DEFAULT 1 +#define CONFIG_LOG_MAXIMUM_LEVEL 3 +#define CONFIG_LOG_COLORS 1 +#define CONFIG_LOG_TIMESTAMP_SOURCE_RTOS 1 +#define CONFIG_LWIP_LOCAL_HOSTNAME "espressif" +#define CONFIG_LWIP_TCPIP_TASK_PRIO 18 +#define CONFIG_LWIP_DNS_SUPPORT_MDNS_QUERIES 1 +#define CONFIG_LWIP_TIMERS_ONDEMAND 1 +#define CONFIG_LWIP_ND6 1 +#define CONFIG_LWIP_MAX_SOCKETS 10 +#define CONFIG_LWIP_SO_REUSE 1 +#define CONFIG_LWIP_SO_REUSE_RXTOALL 1 +#define CONFIG_LWIP_IP4_FRAG 1 +#define CONFIG_LWIP_IP6_FRAG 1 +#define CONFIG_LWIP_IP_REASS_MAX_PBUFS 10 +#define CONFIG_LWIP_ESP_GRATUITOUS_ARP 1 +#define CONFIG_LWIP_GARP_TMR_INTERVAL 60 +#define CONFIG_LWIP_ESP_MLDV6_REPORT 1 +#define CONFIG_LWIP_MLDV6_TMR_INTERVAL 40 +#define CONFIG_LWIP_TCPIP_RECVMBOX_SIZE 32 +#define CONFIG_LWIP_DHCP_DOES_ARP_CHECK 1 +#define CONFIG_LWIP_DHCP_DISABLE_VENDOR_CLASS_ID 1 +#define CONFIG_LWIP_DHCP_OPTIONS_LEN 68 +#define CONFIG_LWIP_NUM_NETIF_CLIENT_DATA 0 +#define CONFIG_LWIP_DHCP_COARSE_TIMER_SECS 1 +#define CONFIG_LWIP_DHCPS 1 +#define CONFIG_LWIP_DHCPS_LEASE_UNIT 60 +#define CONFIG_LWIP_DHCPS_MAX_STATION_NUM 8 +#define CONFIG_LWIP_IPV4 1 +#define CONFIG_LWIP_IPV6 1 +#define CONFIG_LWIP_IPV6_NUM_ADDRESSES 3 +#define CONFIG_LWIP_NETIF_LOOPBACK 1 +#define CONFIG_LWIP_LOOPBACK_MAX_PBUFS 8 +#define CONFIG_LWIP_MAX_ACTIVE_TCP 16 +#define CONFIG_LWIP_MAX_LISTENING_TCP 16 +#define CONFIG_LWIP_TCP_HIGH_SPEED_RETRANSMISSION 1 +#define CONFIG_LWIP_TCP_MAXRTX 12 +#define CONFIG_LWIP_TCP_SYNMAXRTX 12 +#define CONFIG_LWIP_TCP_MSS 1440 +#define CONFIG_LWIP_TCP_TMR_INTERVAL 250 +#define CONFIG_LWIP_TCP_MSL 60000 +#define CONFIG_LWIP_TCP_FIN_WAIT_TIMEOUT 20000 +#define CONFIG_LWIP_TCP_SND_BUF_DEFAULT 5760 +#define CONFIG_LWIP_TCP_WND_DEFAULT 5760 +#define CONFIG_LWIP_TCP_RECVMBOX_SIZE 6 +#define CONFIG_LWIP_TCP_QUEUE_OOSEQ 1 +#define CONFIG_LWIP_TCP_OOSEQ_TIMEOUT 6 +#define CONFIG_LWIP_TCP_OOSEQ_MAX_PBUFS 4 +#define CONFIG_LWIP_TCP_OVERSIZE_MSS 1 +#define CONFIG_LWIP_TCP_RTO_TIME 1500 +#define CONFIG_LWIP_MAX_UDP_PCBS 16 +#define CONFIG_LWIP_UDP_RECVMBOX_SIZE 6 +#define CONFIG_LWIP_CHECKSUM_CHECK_ICMP 1 +#define CONFIG_LWIP_TCPIP_TASK_STACK_SIZE 3072 +#define CONFIG_LWIP_TCPIP_TASK_AFFINITY_NO_AFFINITY 1 +#define CONFIG_LWIP_TCPIP_TASK_AFFINITY 0x7FFFFFFF +#define CONFIG_LWIP_IPV6_MEMP_NUM_ND6_QUEUE 3 +#define CONFIG_LWIP_IPV6_ND6_NUM_NEIGHBORS 5 +#define CONFIG_LWIP_ICMP 1 +#define CONFIG_LWIP_MAX_RAW_PCBS 16 +#define CONFIG_LWIP_SNTP_MAX_SERVERS 1 +#define CONFIG_LWIP_SNTP_UPDATE_DELAY 3600000 +#define CONFIG_LWIP_BRIDGEIF_MAX_PORTS 7 +#define CONFIG_LWIP_ESP_LWIP_ASSERT 1 +#define CONFIG_LWIP_HOOK_TCP_ISN_DEFAULT 1 +#define CONFIG_LWIP_HOOK_IP6_ROUTE_NONE 1 +#define CONFIG_LWIP_HOOK_ND6_GET_GW_NONE 1 +#define CONFIG_LWIP_HOOK_IP6_SELECT_SRC_ADDR_NONE 1 +#define CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_NONE 1 +#define CONFIG_LWIP_HOOK_IP6_INPUT_NONE 1 +#define CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC 1 +#define CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN 1 +#define CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN 16384 +#define CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN 4096 +#define CONFIG_MBEDTLS_SSL_KEEP_PEER_CERTIFICATE 1 +#define CONFIG_MBEDTLS_PKCS7_C 1 +#define CONFIG_MBEDTLS_CERTIFICATE_BUNDLE 1 +#define CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_FULL 1 +#define CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_MAX_CERTS 200 +#define CONFIG_MBEDTLS_CMAC_C 1 +#define CONFIG_MBEDTLS_HARDWARE_AES 1 +#define CONFIG_MBEDTLS_HARDWARE_MPI 1 +#define CONFIG_MBEDTLS_HARDWARE_SHA 1 +#define CONFIG_MBEDTLS_ROM_MD5 1 +#define CONFIG_MBEDTLS_HAVE_TIME 1 +#define CONFIG_MBEDTLS_ECDSA_DETERMINISTIC 1 +#define CONFIG_MBEDTLS_SHA512_C 1 +#define CONFIG_MBEDTLS_TLS_SERVER_AND_CLIENT 1 +#define CONFIG_MBEDTLS_TLS_SERVER 1 +#define CONFIG_MBEDTLS_TLS_CLIENT 1 +#define CONFIG_MBEDTLS_TLS_ENABLED 1 +#define CONFIG_MBEDTLS_KEY_EXCHANGE_RSA 1 +#define CONFIG_MBEDTLS_KEY_EXCHANGE_ELLIPTIC_CURVE 1 +#define CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_RSA 1 +#define CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA 1 +#define CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA 1 +#define CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_RSA 1 +#define CONFIG_MBEDTLS_SSL_RENEGOTIATION 1 +#define CONFIG_MBEDTLS_SSL_PROTO_TLS1_2 1 +#define CONFIG_MBEDTLS_SSL_ALPN 1 +#define CONFIG_MBEDTLS_CLIENT_SSL_SESSION_TICKETS 1 +#define CONFIG_MBEDTLS_SERVER_SSL_SESSION_TICKETS 1 +#define CONFIG_MBEDTLS_AES_C 1 +#define CONFIG_MBEDTLS_CCM_C 1 +#define CONFIG_MBEDTLS_GCM_C 1 +#define CONFIG_MBEDTLS_PEM_PARSE_C 1 +#define CONFIG_MBEDTLS_PEM_WRITE_C 1 +#define CONFIG_MBEDTLS_X509_CRL_PARSE_C 1 +#define CONFIG_MBEDTLS_X509_CSR_PARSE_C 1 +#define CONFIG_MBEDTLS_ECP_C 1 +#define CONFIG_MBEDTLS_ECDH_C 1 +#define CONFIG_MBEDTLS_ECDSA_C 1 +#define CONFIG_MBEDTLS_ECP_DP_SECP192R1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_SECP224R1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_SECP256R1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_SECP384R1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_SECP521R1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_SECP192K1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_SECP224K1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_SECP256K1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_BP256R1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_BP384R1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_BP512R1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_CURVE25519_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_NIST_OPTIM 1 +#define CONFIG_MBEDTLS_ECP_FIXED_POINT_OPTIM 1 +#define CONFIG_MQTT_PROTOCOL_311 1 +#define CONFIG_MQTT_TRANSPORT_SSL 1 +#define CONFIG_MQTT_TRANSPORT_WEBSOCKET 1 +#define CONFIG_MQTT_TRANSPORT_WEBSOCKET_SECURE 1 +#define CONFIG_NEWLIB_STDOUT_LINE_ENDING_CRLF 1 +#define CONFIG_NEWLIB_STDIN_LINE_ENDING_CR 1 +#define CONFIG_NEWLIB_TIME_SYSCALL_USE_RTC_HRT 1 +#define CONFIG_OPENTHREAD_NETWORK_NAME "OpenThread-ESP" +#define CONFIG_OPENTHREAD_MESH_LOCAL_PREFIX "fd00:db8:a0:0::/64" +#define CONFIG_OPENTHREAD_NETWORK_CHANNEL 15 +#define CONFIG_OPENTHREAD_NETWORK_PANID 0x1234 +#define CONFIG_OPENTHREAD_NETWORK_EXTPANID "dead00beef00cafe" +#define CONFIG_OPENTHREAD_NETWORK_MASTERKEY "00112233445566778899aabbccddeeff" +#define CONFIG_OPENTHREAD_NETWORK_PSKC "104810e2315100afd6bc9215a6bfac53" +#define CONFIG_OPENTHREAD_XTAL_ACCURACY 130 +#define CONFIG_ESP_PROTOCOMM_SUPPORT_SECURITY_VERSION_0 1 +#define CONFIG_ESP_PROTOCOMM_SUPPORT_SECURITY_VERSION_1 1 +#define CONFIG_ESP_PROTOCOMM_SUPPORT_SECURITY_VERSION_2 1 +#define CONFIG_PTHREAD_TASK_PRIO_DEFAULT 5 +#define CONFIG_PTHREAD_TASK_STACK_SIZE_DEFAULT 3072 +#define CONFIG_PTHREAD_DEFAULT_CORE_NO_AFFINITY 1 +#define CONFIG_PTHREAD_TASK_CORE_DEFAULT -1 +#define CONFIG_PTHREAD_TASK_NAME_DEFAULT "pthread" +#define CONFIG_MMU_PAGE_SIZE_64KB 1 +#define CONFIG_MMU_PAGE_MODE "64KB" +#define CONFIG_MMU_PAGE_SIZE 0x10000 +#define CONFIG_SPI_FLASH_ROM_DRIVER_PATCH 1 +#define CONFIG_SPI_FLASH_DANGEROUS_WRITE_ABORTS 1 +#define CONFIG_SPI_FLASH_YIELD_DURING_ERASE 1 +#define CONFIG_SPI_FLASH_ERASE_YIELD_DURATION_MS 20 +#define CONFIG_SPI_FLASH_ERASE_YIELD_TICKS 1 +#define CONFIG_SPI_FLASH_WRITE_CHUNK_SIZE 8192 +#define CONFIG_SPI_FLASH_BROWNOUT_RESET_XMC 1 +#define CONFIG_SPI_FLASH_BROWNOUT_RESET 1 +#define CONFIG_SPI_FLASH_VENDOR_XMC_SUPPORTED 1 +#define CONFIG_SPI_FLASH_VENDOR_GD_SUPPORTED 1 +#define CONFIG_SPI_FLASH_VENDOR_ISSI_SUPPORTED 1 +#define CONFIG_SPI_FLASH_VENDOR_MXIC_SUPPORTED 1 +#define CONFIG_SPI_FLASH_VENDOR_WINBOND_SUPPORTED 1 +#define CONFIG_SPI_FLASH_SUPPORT_ISSI_CHIP 1 +#define CONFIG_SPI_FLASH_SUPPORT_MXIC_CHIP 1 +#define CONFIG_SPI_FLASH_SUPPORT_GD_CHIP 1 +#define CONFIG_SPI_FLASH_SUPPORT_WINBOND_CHIP 1 +#define CONFIG_SPI_FLASH_ENABLE_ENCRYPTED_READ_WRITE 1 +#define CONFIG_SPIFFS_MAX_PARTITIONS 3 +#define CONFIG_SPIFFS_CACHE 1 +#define CONFIG_SPIFFS_CACHE_WR 1 +#define CONFIG_SPIFFS_PAGE_CHECK 1 +#define CONFIG_SPIFFS_GC_MAX_RUNS 10 +#define CONFIG_SPIFFS_PAGE_SIZE 256 +#define CONFIG_SPIFFS_OBJ_NAME_LEN 32 +#define CONFIG_SPIFFS_USE_MAGIC 1 +#define CONFIG_SPIFFS_USE_MAGIC_LENGTH 1 +#define CONFIG_SPIFFS_META_LENGTH 4 +#define CONFIG_SPIFFS_USE_MTIME 1 +#define CONFIG_WS_TRANSPORT 1 +#define CONFIG_WS_BUFFER_SIZE 1024 +#define CONFIG_UNITY_ENABLE_FLOAT 1 +#define CONFIG_UNITY_ENABLE_DOUBLE 1 +#define CONFIG_UNITY_ENABLE_IDF_TEST_RUNNER 1 +#define CONFIG_VFS_SUPPORT_IO 1 +#define CONFIG_VFS_SUPPORT_DIR 1 +#define CONFIG_VFS_SUPPORT_SELECT 1 +#define CONFIG_VFS_SUPPRESS_SELECT_DEBUG_OUTPUT 1 +#define CONFIG_VFS_SUPPORT_TERMIOS 1 +#define CONFIG_VFS_MAX_COUNT 8 +#define CONFIG_VFS_SEMIHOSTFS_MAX_MOUNT_POINTS 1 +#define CONFIG_WL_SECTOR_SIZE_4096 1 +#define CONFIG_WL_SECTOR_SIZE 4096 +#define CONFIG_WIFI_PROV_SCAN_MAX_ENTRIES 16 +#define CONFIG_WIFI_PROV_AUTOSTOP_TIMEOUT 30 +#define CONFIG_WIFI_PROV_STA_ALL_CHANNEL_SCAN 1 + +/* List of deprecated options */ +#define CONFIG_A2D_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_A2D_TRACE_LEVEL +#define CONFIG_A2D_TRACE_LEVEL_WARNING CONFIG_BT_LOG_A2D_TRACE_LEVEL_WARNING +#define CONFIG_ADC2_DISABLE_DAC CONFIG_ADC_DISABLE_DAC +#define CONFIG_APPL_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_APPL_TRACE_LEVEL +#define CONFIG_APPL_TRACE_LEVEL_WARNING CONFIG_BT_LOG_APPL_TRACE_LEVEL_WARNING +#define CONFIG_AVCT_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_AVCT_TRACE_LEVEL +#define CONFIG_AVCT_TRACE_LEVEL_WARNING CONFIG_BT_LOG_AVCT_TRACE_LEVEL_WARNING +#define CONFIG_AVDT_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_AVDT_TRACE_LEVEL +#define CONFIG_AVDT_TRACE_LEVEL_WARNING CONFIG_BT_LOG_AVDT_TRACE_LEVEL_WARNING +#define CONFIG_AVRC_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_AVRC_TRACE_LEVEL +#define CONFIG_AVRC_TRACE_LEVEL_WARNING CONFIG_BT_LOG_AVRC_TRACE_LEVEL_WARNING +#define CONFIG_BLE_ADV_REPORT_DISCARD_THRSHOLD CONFIG_BTDM_BLE_ADV_REPORT_DISCARD_THRSHOLD +#define CONFIG_BLE_ADV_REPORT_FLOW_CONTROL_NUM CONFIG_BTDM_BLE_ADV_REPORT_FLOW_CTRL_NUM +#define CONFIG_BLE_ADV_REPORT_FLOW_CONTROL_SUPPORTED CONFIG_BTDM_BLE_ADV_REPORT_FLOW_CTRL_SUPP +#define CONFIG_BLE_ESTABLISH_LINK_CONNECTION_TIMEOUT CONFIG_BT_BLE_ESTAB_LINK_CONN_TOUT +#define CONFIG_BLE_SCAN_DUPLICATE CONFIG_BTDM_BLE_SCAN_DUPL +#define CONFIG_BLE_SMP_ENABLE CONFIG_BT_BLE_SMP_ENABLE +#define CONFIG_BLUEDROID_ENABLED CONFIG_BT_BLUEDROID_ENABLED +#define CONFIG_BLUEDROID_PINNED_TO_CORE CONFIG_BT_BLUEDROID_PINNED_TO_CORE +#define CONFIG_BLUEDROID_PINNED_TO_CORE_0 CONFIG_BT_BLUEDROID_PINNED_TO_CORE_0 +#define CONFIG_BLUFI_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_BLUFI_TRACE_LEVEL +#define CONFIG_BLUFI_TRACE_LEVEL_WARNING CONFIG_BT_LOG_BLUFI_TRACE_LEVEL_WARNING +#define CONFIG_BNEP_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_BNEP_TRACE_LEVEL +#define CONFIG_BROWNOUT_DET CONFIG_ESP_BROWNOUT_DET +#define CONFIG_BROWNOUT_DET_LVL CONFIG_ESP_BROWNOUT_DET_LVL +#define CONFIG_BROWNOUT_DET_LVL_SEL_0 CONFIG_ESP_BROWNOUT_DET_LVL_SEL_0 +#define CONFIG_BTC_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_BTC_TRACE_LEVEL +#define CONFIG_BTC_TASK_STACK_SIZE CONFIG_BT_BTC_TASK_STACK_SIZE +#define CONFIG_BTC_TRACE_LEVEL_WARNING CONFIG_BT_LOG_BTC_TRACE_LEVEL_WARNING +#define CONFIG_BTDM_CONTROLLER_BLE_MAX_CONN CONFIG_BTDM_CTRL_BLE_MAX_CONN +#define CONFIG_BTDM_CONTROLLER_BLE_MAX_CONN_EFF CONFIG_BTDM_CTRL_BLE_MAX_CONN_EFF +#define CONFIG_BTDM_CONTROLLER_BR_EDR_MAX_ACL_CONN_EFF CONFIG_BTDM_CTRL_BR_EDR_MAX_ACL_CONN_EFF +#define CONFIG_BTDM_CONTROLLER_BR_EDR_MAX_SYNC_CONN_EFF CONFIG_BTDM_CTRL_BR_EDR_MAX_SYNC_CONN_EFF +#define CONFIG_BTDM_CONTROLLER_FULL_SCAN_SUPPORTED CONFIG_BTDM_CTRL_FULL_SCAN_SUPPORTED +#define CONFIG_BTDM_CONTROLLER_HCI_MODE_VHCI CONFIG_BTDM_CTRL_HCI_MODE_VHCI +#define CONFIG_BTDM_CONTROLLER_MODEM_SLEEP CONFIG_BTDM_CTRL_MODEM_SLEEP +#define CONFIG_BTDM_CONTROLLER_MODE_BLE_ONLY CONFIG_BTDM_CTRL_MODE_BLE_ONLY +#define CONFIG_BTDM_CONTROLLER_PINNED_TO_CORE CONFIG_BTDM_CTRL_PINNED_TO_CORE +#define CONFIG_BTH_LOG_SDP_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_SDP_TRACE_LEVEL +#define CONFIG_BTIF_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_BTIF_TRACE_LEVEL +#define CONFIG_BTIF_TRACE_LEVEL_WARNING CONFIG_BT_LOG_BTIF_TRACE_LEVEL_WARNING +#define CONFIG_BTM_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_BTM_TRACE_LEVEL +#define CONFIG_BTM_TRACE_LEVEL_WARNING CONFIG_BT_LOG_BTM_TRACE_LEVEL_WARNING +#define CONFIG_BTU_TASK_STACK_SIZE CONFIG_BT_BTU_TASK_STACK_SIZE +#define CONFIG_COMPILER_OPTIMIZATION_LEVEL_RELEASE CONFIG_COMPILER_OPTIMIZATION_SIZE +#define CONFIG_CONSOLE_UART CONFIG_ESP_CONSOLE_UART +#define CONFIG_CONSOLE_UART_BAUDRATE CONFIG_ESP_CONSOLE_UART_BAUDRATE +#define CONFIG_CONSOLE_UART_DEFAULT CONFIG_ESP_CONSOLE_UART_DEFAULT +#define CONFIG_CONSOLE_UART_NUM CONFIG_ESP_CONSOLE_UART_NUM +#define CONFIG_DUPLICATE_SCAN_CACHE_SIZE CONFIG_BTDM_SCAN_DUPL_CACHE_SIZE +#define CONFIG_ESP32_APPTRACE_DEST_NONE CONFIG_APPTRACE_DEST_NONE +#define CONFIG_ESP32_APPTRACE_LOCK_ENABLE CONFIG_APPTRACE_LOCK_ENABLE +#define CONFIG_ESP32_BROWNOUT_DET CONFIG_ESP_BROWNOUT_DET +#define CONFIG_ESP32_BROWNOUT_DET_LVL CONFIG_ESP_BROWNOUT_DET_LVL +#define CONFIG_ESP32_BROWNOUT_DET_LVL_SEL_0 CONFIG_ESP_BROWNOUT_DET_LVL_SEL_0 +#define CONFIG_ESP32_DEBUG_OCDAWARE CONFIG_ESP_DEBUG_OCDAWARE +#define CONFIG_ESP32_DEEP_SLEEP_WAKEUP_DELAY CONFIG_ESP_SLEEP_WAIT_FLASH_READY_EXTRA_DELAY +#define CONFIG_ESP32_DEFAULT_CPU_FREQ_160 CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ_160 +#define CONFIG_ESP32_DEFAULT_PTHREAD_CORE_NO_AFFINITY CONFIG_PTHREAD_DEFAULT_CORE_NO_AFFINITY +#define CONFIG_ESP32_ENABLE_COREDUMP_TO_NONE CONFIG_ESP_COREDUMP_ENABLE_TO_NONE +#define CONFIG_ESP32_PANIC_PRINT_REBOOT CONFIG_ESP_SYSTEM_PANIC_PRINT_REBOOT +#define CONFIG_ESP32_PHY_CALIBRATION_AND_DATA_STORAGE CONFIG_ESP_PHY_CALIBRATION_AND_DATA_STORAGE +#define CONFIG_ESP32_PHY_MAX_TX_POWER CONFIG_ESP_PHY_MAX_TX_POWER +#define CONFIG_ESP32_PHY_MAX_WIFI_TX_POWER CONFIG_ESP_PHY_MAX_WIFI_TX_POWER +#define CONFIG_ESP32_PTHREAD_TASK_CORE_DEFAULT CONFIG_PTHREAD_TASK_CORE_DEFAULT +#define CONFIG_ESP32_PTHREAD_TASK_NAME_DEFAULT CONFIG_PTHREAD_TASK_NAME_DEFAULT +#define CONFIG_ESP32_PTHREAD_TASK_PRIO_DEFAULT CONFIG_PTHREAD_TASK_PRIO_DEFAULT +#define CONFIG_ESP32_PTHREAD_TASK_STACK_SIZE_DEFAULT CONFIG_PTHREAD_TASK_STACK_SIZE_DEFAULT +#define CONFIG_ESP32_RTC_CLK_CAL_CYCLES CONFIG_RTC_CLK_CAL_CYCLES +#define CONFIG_ESP32_RTC_CLK_SRC_INT_RC CONFIG_RTC_CLK_SRC_INT_RC +#define CONFIG_ESP32_RTC_CLOCK_SOURCE_INTERNAL_RC CONFIG_RTC_CLK_SRC_INT_RC +#define CONFIG_ESP32_TIME_SYSCALL_USE_RTC_FRC1 CONFIG_NEWLIB_TIME_SYSCALL_USE_RTC_HRT +#define CONFIG_ESP32_TIME_SYSCALL_USE_RTC_HRT CONFIG_NEWLIB_TIME_SYSCALL_USE_RTC_HRT +#define CONFIG_ESP32_WIFI_AMPDU_RX_ENABLED CONFIG_ESP_WIFI_AMPDU_RX_ENABLED +#define CONFIG_ESP32_WIFI_AMPDU_TX_ENABLED CONFIG_ESP_WIFI_AMPDU_TX_ENABLED +#define CONFIG_ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM CONFIG_ESP_WIFI_DYNAMIC_RX_BUFFER_NUM +#define CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER CONFIG_ESP_WIFI_DYNAMIC_TX_BUFFER +#define CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER_NUM CONFIG_ESP_WIFI_DYNAMIC_TX_BUFFER_NUM +#define CONFIG_ESP32_WIFI_ENABLED CONFIG_ESP_WIFI_ENABLED +#define CONFIG_ESP32_WIFI_ENABLE_WPA3_SAE CONFIG_ESP_WIFI_ENABLE_WPA3_SAE +#define CONFIG_ESP32_WIFI_IRAM_OPT CONFIG_ESP_WIFI_IRAM_OPT +#define CONFIG_ESP32_WIFI_MGMT_SBUF_NUM CONFIG_ESP_WIFI_MGMT_SBUF_NUM +#define CONFIG_ESP32_WIFI_NVS_ENABLED CONFIG_ESP_WIFI_NVS_ENABLED +#define CONFIG_ESP32_WIFI_RX_BA_WIN CONFIG_ESP_WIFI_RX_BA_WIN +#define CONFIG_ESP32_WIFI_RX_IRAM_OPT CONFIG_ESP_WIFI_RX_IRAM_OPT +#define CONFIG_ESP32_WIFI_SOFTAP_BEACON_MAX_LEN CONFIG_ESP_WIFI_SOFTAP_BEACON_MAX_LEN +#define CONFIG_ESP32_WIFI_STATIC_RX_BUFFER_NUM CONFIG_ESP_WIFI_STATIC_RX_BUFFER_NUM +#define CONFIG_ESP32_WIFI_SW_COEXIST_ENABLE CONFIG_ESP_COEX_SW_COEXIST_ENABLE +#define CONFIG_ESP32_WIFI_TASK_PINNED_TO_CORE_0 CONFIG_ESP_WIFI_TASK_PINNED_TO_CORE_0 +#define CONFIG_ESP32_WIFI_TX_BA_WIN CONFIG_ESP_WIFI_TX_BA_WIN +#define CONFIG_ESP32_WIFI_TX_BUFFER_TYPE CONFIG_ESP_WIFI_TX_BUFFER_TYPE +#define CONFIG_ESP32_XTAL_FREQ CONFIG_XTAL_FREQ +#define CONFIG_ESP32_XTAL_FREQ_40 CONFIG_XTAL_FREQ_40 +#define CONFIG_ESP_GRATUITOUS_ARP CONFIG_LWIP_ESP_GRATUITOUS_ARP +#define CONFIG_ESP_SLEEP_DEEP_SLEEP_WAKEUP_DELAY CONFIG_ESP_SLEEP_WAIT_FLASH_READY_EXTRA_DELAY +#define CONFIG_ESP_TASK_WDT CONFIG_ESP_TASK_WDT_INIT +#define CONFIG_ESP_WIFI_SW_COEXIST_ENABLE CONFIG_ESP_COEX_SW_COEXIST_ENABLE +#define CONFIG_FLASHMODE_DIO CONFIG_ESPTOOLPY_FLASHMODE_DIO +#define CONFIG_FOUR_UNIVERSAL_MAC_ADDRESS CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES_FOUR +#define CONFIG_GAP_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_GAP_TRACE_LEVEL +#define CONFIG_GAP_TRACE_LEVEL_WARNING CONFIG_BT_LOG_GAP_TRACE_LEVEL_WARNING +#define CONFIG_GARP_TMR_INTERVAL CONFIG_LWIP_GARP_TMR_INTERVAL +#define CONFIG_GATTC_ENABLE CONFIG_BT_GATTC_ENABLE +#define CONFIG_GATTS_ENABLE CONFIG_BT_GATTS_ENABLE +#define CONFIG_GATTS_SEND_SERVICE_CHANGE_AUTO CONFIG_BT_GATTS_SEND_SERVICE_CHANGE_AUTO +#define CONFIG_GATTS_SEND_SERVICE_CHANGE_MODE CONFIG_BT_GATTS_SEND_SERVICE_CHANGE_MODE +#define CONFIG_GATT_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_GATT_TRACE_LEVEL +#define CONFIG_GATT_TRACE_LEVEL_WARNING CONFIG_BT_LOG_GATT_TRACE_LEVEL_WARNING +#define CONFIG_HCI_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_HCI_TRACE_LEVEL +#define CONFIG_HCI_TRACE_LEVEL_WARNING CONFIG_BT_LOG_HCI_TRACE_LEVEL_WARNING +#define CONFIG_HID_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_HID_TRACE_LEVEL +#define CONFIG_HID_TRACE_LEVEL_WARNING CONFIG_BT_LOG_HID_TRACE_LEVEL_WARNING +#define CONFIG_INT_WDT CONFIG_ESP_INT_WDT +#define CONFIG_INT_WDT_CHECK_CPU1 CONFIG_ESP_INT_WDT_CHECK_CPU1 +#define CONFIG_INT_WDT_TIMEOUT_MS CONFIG_ESP_INT_WDT_TIMEOUT_MS +#define CONFIG_IPC_TASK_STACK_SIZE CONFIG_ESP_IPC_TASK_STACK_SIZE +#define CONFIG_L2CAP_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_L2CAP_TRACE_LEVEL +#define CONFIG_L2CAP_TRACE_LEVEL_WARNING CONFIG_BT_LOG_L2CAP_TRACE_LEVEL_WARNING +#define CONFIG_LOG_BOOTLOADER_LEVEL CONFIG_BOOTLOADER_LOG_LEVEL +#define CONFIG_LOG_BOOTLOADER_LEVEL_INFO CONFIG_BOOTLOADER_LOG_LEVEL_INFO +#define CONFIG_MAIN_TASK_STACK_SIZE CONFIG_ESP_MAIN_TASK_STACK_SIZE +#define CONFIG_MCA_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_MCA_TRACE_LEVEL +#define CONFIG_MCA_TRACE_LEVEL_WARNING CONFIG_BT_LOG_MCA_TRACE_LEVEL_WARNING +#define CONFIG_MONITOR_BAUD CONFIG_ESPTOOLPY_MONITOR_BAUD +#define CONFIG_NUMBER_OF_UNIVERSAL_MAC_ADDRESS CONFIG_ESP32_UNIVERSAL_MAC_ADDRESSES +#define CONFIG_OPTIMIZATION_ASSERTIONS_ENABLED CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_ENABLE +#define CONFIG_OPTIMIZATION_ASSERTION_LEVEL CONFIG_COMPILER_OPTIMIZATION_ASSERTION_LEVEL +#define CONFIG_OPTIMIZATION_LEVEL_RELEASE CONFIG_COMPILER_OPTIMIZATION_SIZE +#define CONFIG_OSI_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_OSI_TRACE_LEVEL +#define CONFIG_OSI_TRACE_LEVEL_WARNING CONFIG_BT_LOG_OSI_TRACE_LEVEL_WARNING +#define CONFIG_PAN_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_PAN_TRACE_LEVEL +#define CONFIG_PAN_TRACE_LEVEL_WARNING CONFIG_BT_LOG_PAN_TRACE_LEVEL_WARNING +#define CONFIG_POST_EVENTS_FROM_IRAM_ISR CONFIG_ESP_EVENT_POST_FROM_IRAM_ISR +#define CONFIG_POST_EVENTS_FROM_ISR CONFIG_ESP_EVENT_POST_FROM_ISR +#define CONFIG_RFCOMM_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_RFCOMM_TRACE_LEVEL +#define CONFIG_RFCOMM_TRACE_LEVEL_WARNING CONFIG_BT_LOG_RFCOMM_TRACE_LEVEL_WARNING +#define CONFIG_SCAN_DUPLICATE_BY_DEVICE_ADDR CONFIG_BTDM_SCAN_DUPL_TYPE_DEVICE +#define CONFIG_SCAN_DUPLICATE_TYPE CONFIG_BTDM_SCAN_DUPL_TYPE +#define CONFIG_SDP_TRACE_LEVEL_WARNING CONFIG_BT_LOG_SDP_TRACE_LEVEL_WARNING +#define CONFIG_SEMIHOSTFS_MAX_MOUNT_POINTS CONFIG_VFS_SEMIHOSTFS_MAX_MOUNT_POINTS +#define CONFIG_SMP_ENABLE CONFIG_BT_SMP_ENABLE +#define CONFIG_SMP_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_SMP_TRACE_LEVEL +#define CONFIG_SMP_TRACE_LEVEL_WARNING CONFIG_BT_LOG_SMP_TRACE_LEVEL_WARNING +#define CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ABORTS CONFIG_SPI_FLASH_DANGEROUS_WRITE_ABORTS +#define CONFIG_STACK_CHECK_NONE CONFIG_COMPILER_STACK_CHECK_MODE_NONE +#define CONFIG_SUPPORT_TERMIOS CONFIG_VFS_SUPPORT_TERMIOS +#define CONFIG_SUPPRESS_SELECT_DEBUG_OUTPUT CONFIG_VFS_SUPPRESS_SELECT_DEBUG_OUTPUT +#define CONFIG_SW_COEXIST_ENABLE CONFIG_ESP_COEX_SW_COEXIST_ENABLE +#define CONFIG_SYSTEM_EVENT_QUEUE_SIZE CONFIG_ESP_SYSTEM_EVENT_QUEUE_SIZE +#define CONFIG_SYSTEM_EVENT_TASK_STACK_SIZE CONFIG_ESP_SYSTEM_EVENT_TASK_STACK_SIZE +#define CONFIG_TASK_WDT CONFIG_ESP_TASK_WDT_INIT +#define CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU0 CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU0 +#define CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU1 CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU1 +#define CONFIG_TASK_WDT_TIMEOUT_S CONFIG_ESP_TASK_WDT_TIMEOUT_S +#define CONFIG_TCPIP_RECVMBOX_SIZE CONFIG_LWIP_TCPIP_RECVMBOX_SIZE +#define CONFIG_TCPIP_TASK_AFFINITY CONFIG_LWIP_TCPIP_TASK_AFFINITY +#define CONFIG_TCPIP_TASK_AFFINITY_NO_AFFINITY CONFIG_LWIP_TCPIP_TASK_AFFINITY_NO_AFFINITY +#define CONFIG_TCPIP_TASK_STACK_SIZE CONFIG_LWIP_TCPIP_TASK_STACK_SIZE +#define CONFIG_TCP_MAXRTX CONFIG_LWIP_TCP_MAXRTX +#define CONFIG_TCP_MSL CONFIG_LWIP_TCP_MSL +#define CONFIG_TCP_MSS CONFIG_LWIP_TCP_MSS +#define CONFIG_TCP_OVERSIZE_MSS CONFIG_LWIP_TCP_OVERSIZE_MSS +#define CONFIG_TCP_QUEUE_OOSEQ CONFIG_LWIP_TCP_QUEUE_OOSEQ +#define CONFIG_TCP_RECVMBOX_SIZE CONFIG_LWIP_TCP_RECVMBOX_SIZE +#define CONFIG_TCP_SND_BUF_DEFAULT CONFIG_LWIP_TCP_SND_BUF_DEFAULT +#define CONFIG_TCP_SYNMAXRTX CONFIG_LWIP_TCP_SYNMAXRTX +#define CONFIG_TCP_WND_DEFAULT CONFIG_LWIP_TCP_WND_DEFAULT +#define CONFIG_TIMER_QUEUE_LENGTH CONFIG_FREERTOS_TIMER_QUEUE_LENGTH +#define CONFIG_TIMER_TASK_PRIORITY CONFIG_FREERTOS_TIMER_TASK_PRIORITY +#define CONFIG_TIMER_TASK_STACK_DEPTH CONFIG_FREERTOS_TIMER_TASK_STACK_DEPTH +#define CONFIG_TIMER_TASK_STACK_SIZE CONFIG_ESP_TIMER_TASK_STACK_SIZE +#define CONFIG_UDP_RECVMBOX_SIZE CONFIG_LWIP_UDP_RECVMBOX_SIZE +#define CONFIG_WPA_MBEDTLS_CRYPTO CONFIG_ESP_WIFI_MBEDTLS_CRYPTO diff --git a/espradio/blobs/headers/esp32c2/esp_bt.h b/espradio/blobs/headers/esp32c2/esp_bt.h new file mode 100644 index 000000000..d3b160c72 --- /dev/null +++ b/espradio/blobs/headers/esp32c2/esp_bt.h @@ -0,0 +1,440 @@ +/* + * SPDX-FileCopyrightText: 2015-2023 Espressif Systems (Shanghai) CO LTD + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#ifndef __ESP_BT_H__ +#define __ESP_BT_H__ + +#include +#include +#include "esp_err.h" +#include "sdkconfig.h" + +#include "nimble/nimble_npl.h" +#include "hal/efuse_hal.h" + +#ifdef CONFIG_BT_LE_HCI_INTERFACE_USE_UART +#include "driver/uart.h" +#endif + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * @brief Bluetooth mode for controller enable/disable. + */ +typedef enum { + ESP_BT_MODE_IDLE = 0x00, /*!< Bluetooth is not running */ + ESP_BT_MODE_BLE = 0x01, /*!< Run BLE mode */ + ESP_BT_MODE_CLASSIC_BT = 0x02, /*!< Run Classic BT mode */ + ESP_BT_MODE_BTDM = 0x03, /*!< Run dual mode */ +} esp_bt_mode_t; + +/** + * @brief Bluetooth controller enable/disable/initialised/de-initialised status. + */ +typedef enum { + ESP_BT_CONTROLLER_STATUS_IDLE = 0, /*!< Controller is in idle state */ + ESP_BT_CONTROLLER_STATUS_INITED, /*!< Controller is in initialising state */ + ESP_BT_CONTROLLER_STATUS_ENABLED, /*!< Controller is in enabled state */ + ESP_BT_CONTROLLER_STATUS_NUM, /*!< Controller is in disabled state */ +} esp_bt_controller_status_t; + +/** + * @brief BLE tx power type + * ESP_BLE_PWR_TYPE_CONN_HDL0-8: for each connection, and only be set after connection completed. + * when disconnect, the correspond TX power is not effected. + * ESP_BLE_PWR_TYPE_ADV : for advertising/scan response. + * ESP_BLE_PWR_TYPE_SCAN : for scan. + * ESP_BLE_PWR_TYPE_DEFAULT : if each connection's TX power is not set, it will use this default value. + * if neither in scan mode nor in adv mode, it will use this default value. + * If none of power type is set, system will use ESP_PWR_LVL_P3 as default for ADV/SCAN/CONN0-9. + */ +typedef enum { + ESP_BLE_PWR_TYPE_CONN_HDL0 = 0, /*!< For connection handle 0 */ + ESP_BLE_PWR_TYPE_CONN_HDL1 = 1, /*!< For connection handle 1 */ + ESP_BLE_PWR_TYPE_CONN_HDL2 = 2, /*!< For connection handle 2 */ + ESP_BLE_PWR_TYPE_CONN_HDL3 = 3, /*!< For connection handle 3 */ + ESP_BLE_PWR_TYPE_CONN_HDL4 = 4, /*!< For connection handle 4 */ + ESP_BLE_PWR_TYPE_CONN_HDL5 = 5, /*!< For connection handle 5 */ + ESP_BLE_PWR_TYPE_CONN_HDL6 = 6, /*!< For connection handle 6 */ + ESP_BLE_PWR_TYPE_CONN_HDL7 = 7, /*!< For connection handle 7 */ + ESP_BLE_PWR_TYPE_CONN_HDL8 = 8, /*!< For connection handle 8 */ + ESP_BLE_PWR_TYPE_ADV = 9, /*!< For advertising */ + ESP_BLE_PWR_TYPE_SCAN = 10, /*!< For scan */ + ESP_BLE_PWR_TYPE_DEFAULT = 11, /*!< For default, if not set other, it will use default value */ + ESP_BLE_PWR_TYPE_NUM = 12, /*!< TYPE numbers */ +} esp_ble_power_type_t; + +/** + * @brief Bluetooth TX power level(index), it's just a index corresponding to power(dbm). + */ +typedef enum { + ESP_PWR_LVL_N24 = 0, /*!< Corresponding to -24dbm */ + ESP_PWR_LVL_N21 = 1, /*!< Corresponding to -21dbm */ + ESP_PWR_LVL_N18 = 2, /*!< Corresponding to -18dbm */ + ESP_PWR_LVL_N15 = 3, /*!< Corresponding to -15dbm */ + ESP_PWR_LVL_N12 = 4, /*!< Corresponding to -12dbm */ + ESP_PWR_LVL_N9 = 5, /*!< Corresponding to -9dbm */ + ESP_PWR_LVL_N6 = 6, /*!< Corresponding to -6dbm */ + ESP_PWR_LVL_N3 = 7, /*!< Corresponding to -3dbm */ + ESP_PWR_LVL_N0 = 8, /*!< Corresponding to 0dbm */ + ESP_PWR_LVL_P3 = 9, /*!< Corresponding to +3dbm */ + ESP_PWR_LVL_P6 = 10, /*!< Corresponding to +6dbm */ + ESP_PWR_LVL_P9 = 11, /*!< Corresponding to +9dbm */ + ESP_PWR_LVL_P12 = 12, /*!< Corresponding to +12dbm */ + ESP_PWR_LVL_P15 = 13, /*!< Corresponding to +15dbm */ + ESP_PWR_LVL_P18 = 14, /*!< Corresponding to +18dbm */ + ESP_PWR_LVL_P20 = 15, /*!< Corresponding to +20dbm */ + ESP_PWR_LVL_P21 = 15, /*!< Corresponding to +20dbm, this enum variable has been deprecated */ + ESP_PWR_LVL_INVALID = 0xFF, /*!< Indicates an invalid value */ +} esp_power_level_t; + +/** + * @brief The enhanced type of which tx power, could set Advertising/Connection/Default and etc. + */ +typedef enum { + ESP_BLE_ENHANCED_PWR_TYPE_DEFAULT = 0, + ESP_BLE_ENHANCED_PWR_TYPE_ADV, + ESP_BLE_ENHANCED_PWR_TYPE_SCAN, + ESP_BLE_ENHANCED_PWR_TYPE_INIT, + ESP_BLE_ENHANCED_PWR_TYPE_CONN, + ESP_BLE_ENHANCED_PWR_TYPE_MAX, +} esp_ble_enhanced_power_type_t; + +/** + * @brief Select buffers +*/ +typedef enum { + ESP_BLE_LOG_BUF_HCI = 0x02, + ESP_BLE_LOG_BUF_CONTROLLER = 0x05, +} esp_ble_log_buf_t; + +/** + * @brief Address type and address value. + */ +typedef struct { + uint8_t type; /*!< Type of the Bluetooth address (public, random, etc.) */ + uint8_t val[6]; /*!< Array containing the 6-byte Bluetooth address value */ +} esp_ble_addr_t; + +/** + * @brief Set BLE TX power + * Connection Tx power should only be set after connection created. + * @param power_type : The type of which tx power, could set Advertising/Connection/Default and etc + * @param power_level: Power level(index) corresponding to absolute value(dbm) + * @return ESP_OK - success, other - failed + */ +esp_err_t esp_ble_tx_power_set(esp_ble_power_type_t power_type, esp_power_level_t power_level); + +/** + * @brief Get BLE TX power + * Connection Tx power should only be get after connection created. + * @param power_type : The type of which tx power, could set Advertising/Connection/Default and etc + * @return >= 0 - Power level, < 0 - Invalid + */ +esp_power_level_t esp_ble_tx_power_get(esp_ble_power_type_t power_type); + +/** + * @brief ENHANCED API for Setting BLE TX power + * Connection Tx power should only be set after connection created. + * @param power_type : The enhanced type of which tx power, could set Advertising/Connection/Default and etc + * @param handle : The handle of Advertising or Connection and the value 0 for other enhanced power types. + * @param power_level: Power level(index) corresponding to absolute value(dbm) + * @return ESP_OK - success, other - failed + */ +esp_err_t esp_ble_tx_power_set_enhanced(esp_ble_enhanced_power_type_t power_type, uint16_t handle, esp_power_level_t power_level); + +/** + * @brief ENHANCED API of Getting BLE TX power + * Connection Tx power should only be get after connection created. + * @param power_type : The enhanced type of which tx power, could set Advertising/Connection/Default and etc + * @param handle : The handle of Advertising or Connection and the value 0 for other enhanced power types. + * @return >= 0 - Power level, < 0 - Invalid + */ +esp_power_level_t esp_ble_tx_power_get_enhanced(esp_ble_enhanced_power_type_t power_type, uint16_t handle); + +/** + * @brief Get version number from chip revision number + * + * @return uint8_t version_number + */ +uint8_t esp_ble_get_chip_rev_version(void); + +#define CONFIG_VERSION 0x20231124 +#define CONFIG_MAGIC 0x5A5AA5A5 + +/** + * @brief Controller config options, depend on config mask. + * Config mask indicate which functions enabled, this means + * some options or parameters of some functions enabled by config mask. + */ +typedef struct { + uint32_t config_version; /*!< Version number of the defined structure */ + uint16_t ble_ll_resolv_list_size; /*!< Size of the resolvable private address list */ + uint16_t ble_hci_evt_hi_buf_count; /*!< Count of high buffers for HCI events */ + uint16_t ble_hci_evt_lo_buf_count; /*!< Count of low buffers for HCI events */ + uint8_t ble_ll_sync_list_cnt; /*!< Number of synchronization lists */ + uint8_t ble_ll_sync_cnt; /*!< Number of synchronizations */ + uint16_t ble_ll_rsp_dup_list_count; /*!< Count of duplicated lists for scan response packets */ + uint16_t ble_ll_adv_dup_list_count; /*!< Count of duplicated lists for advertising packets */ + uint8_t ble_ll_tx_pwr_dbm; /*!< Tx power (transmit power) in dBm */ + uint64_t rtc_freq; /*!< Frequency of RTC (Real-Time Clock) */ + uint16_t ble_ll_sca; /*!< Sleep Clock Accuracy (SCA) parameter */ + uint8_t ble_ll_scan_phy_number; /*!< Number of PHYs supported for scanning */ + uint16_t ble_ll_conn_def_auth_pyld_tmo; /*!< Connection default authentication payload timeout */ + uint8_t ble_ll_jitter_usecs; /*!< Jitter time in microseconds */ + uint16_t ble_ll_sched_max_adv_pdu_usecs; /*!< Maximum time in microseconds for advertising PDU scheduling */ + uint16_t ble_ll_sched_direct_adv_max_usecs; /*!< Maximum time in microseconds for directed advertising scheduling */ + uint16_t ble_ll_sched_adv_max_usecs; /*!< Maximum time in microseconds for advertising scheduling */ + uint16_t ble_scan_rsp_data_max_len; /*!< Maximum length of scan response data */ + uint8_t ble_ll_cfg_num_hci_cmd_pkts; /*!< Number of HCI command packets that can be queued */ + uint32_t ble_ll_ctrl_proc_timeout_ms; /*!< Control processing timeout in milliseconds */ + uint16_t nimble_max_connections; /*!< Maximum number of connections supported */ + uint8_t ble_whitelist_size; /*!< Size of the white list */ + uint16_t ble_acl_buf_size; /*!< Buffer size of ACL (Asynchronous Connection-Less) data */ + uint16_t ble_acl_buf_count; /*!< Buffer count of ACL data */ + uint16_t ble_hci_evt_buf_size; /*!< Buffer size for HCI event data */ + uint16_t ble_multi_adv_instances; /*!< Number of advertising instances */ + uint16_t ble_ext_adv_max_size; /*!< Maximum size of extended advertising data */ + uint16_t controller_task_stack_size; /*!< Size of Bluetooth controller task stack */ + uint8_t controller_task_prio; /*!< Priority of the Bluetooth task */ + uint8_t controller_run_cpu; /*!< CPU number on which the Bluetooth controller task runs */ + uint8_t enable_qa_test; /*!< Enable for QA test */ + uint8_t enable_bqb_test; /*!< Enable for BQB test */ + uint8_t enable_uart_hci; /*!< Enable UART for HCI (Host Controller Interface) */ + uint8_t ble_hci_uart_port; /*!< Port of UART for HCI */ + uint32_t ble_hci_uart_baud; /*!< Baudrate of UART for HCI */ + uint8_t ble_hci_uart_data_bits; /*!< Data bits of UART for HCI */ + uint8_t ble_hci_uart_stop_bits; /*!< Stop bits of UART for HCI */ + uint8_t ble_hci_uart_flow_ctrl; /*!< Flow control of UART for HCI */ + uint8_t ble_hci_uart_uart_parity; /*!< UART parity */ + uint8_t enable_tx_cca; /*!< Enable Clear Channel Assessment (CCA) when transmitting */ + uint8_t cca_rssi_thresh; /*!< RSSI threshold for CCA */ + uint8_t sleep_en; /*!< Enable sleep functionality */ + uint8_t coex_phy_coded_tx_rx_time_limit; /*!< Coexistence PHY coded TX and RX time limit */ + uint8_t dis_scan_backoff; /*!< Disable scan backoff */ + uint8_t ble_scan_classify_filter_enable; /*!< Enable classification filter for BLE scan */ + uint8_t cca_drop_mode; /*!< CCA drop mode */ + int8_t cca_low_tx_pwr; /*!< Low TX power setting for CCA */ + uint8_t main_xtal_freq; /*!< Main crystal frequency */ + uint8_t version_num; /*!< Version number */ + uint8_t ignore_wl_for_direct_adv; /*!< Ignore the white list for directed advertising */ + uint8_t csa2_select; /*!< Select CSA#2 */ + uint32_t config_magic; /*!< Configuration magic value */ +} esp_bt_controller_config_t; + +#define BT_CONTROLLER_INIT_CONFIG_DEFAULT() { \ + .config_version = CONFIG_VERSION, \ + .ble_ll_resolv_list_size = CONFIG_BT_LE_LL_RESOLV_LIST_SIZE, \ + .ble_hci_evt_hi_buf_count = DEFAULT_BT_LE_HCI_EVT_HI_BUF_COUNT, \ + .ble_hci_evt_lo_buf_count = DEFAULT_BT_LE_HCI_EVT_LO_BUF_COUNT, \ + .ble_ll_sync_list_cnt = DEFAULT_BT_LE_MAX_PERIODIC_ADVERTISER_LIST, \ + .ble_ll_sync_cnt = DEFAULT_BT_LE_MAX_PERIODIC_SYNCS, \ + .ble_ll_rsp_dup_list_count = CONFIG_BT_LE_LL_DUP_SCAN_LIST_COUNT, \ + .ble_ll_adv_dup_list_count = CONFIG_BT_LE_LL_DUP_SCAN_LIST_COUNT, \ + .ble_ll_tx_pwr_dbm = BLE_LL_TX_PWR_DBM_N, \ + .rtc_freq = RTC_FREQ_N, \ + .ble_ll_sca = CONFIG_BT_LE_LL_SCA, \ + .ble_ll_scan_phy_number = BLE_LL_SCAN_PHY_NUMBER_N, \ + .ble_ll_conn_def_auth_pyld_tmo = BLE_LL_CONN_DEF_AUTH_PYLD_TMO_N, \ + .ble_ll_jitter_usecs = BLE_LL_JITTER_USECS_N, \ + .ble_ll_sched_max_adv_pdu_usecs = BLE_LL_SCHED_MAX_ADV_PDU_USECS_N, \ + .ble_ll_sched_direct_adv_max_usecs = BLE_LL_SCHED_DIRECT_ADV_MAX_USECS_N, \ + .ble_ll_sched_adv_max_usecs = BLE_LL_SCHED_ADV_MAX_USECS_N, \ + .ble_scan_rsp_data_max_len = DEFAULT_BT_LE_SCAN_RSP_DATA_MAX_LEN_N, \ + .ble_ll_cfg_num_hci_cmd_pkts = BLE_LL_CFG_NUM_HCI_CMD_PKTS_N, \ + .ble_ll_ctrl_proc_timeout_ms = BLE_LL_CTRL_PROC_TIMEOUT_MS_N, \ + .nimble_max_connections = DEFAULT_BT_LE_MAX_CONNECTIONS, \ + .ble_whitelist_size = DEFAULT_BT_NIMBLE_WHITELIST_SIZE, \ + .ble_acl_buf_size = DEFAULT_BT_LE_ACL_BUF_SIZE, \ + .ble_acl_buf_count = DEFAULT_BT_LE_ACL_BUF_COUNT, \ + .ble_hci_evt_buf_size = DEFAULT_BT_LE_HCI_EVT_BUF_SIZE, \ + .ble_multi_adv_instances = DEFAULT_BT_LE_MAX_EXT_ADV_INSTANCES, \ + .ble_ext_adv_max_size = DEFAULT_BT_LE_EXT_ADV_MAX_SIZE, \ + .controller_task_stack_size = NIMBLE_LL_STACK_SIZE, \ + .controller_task_prio = ESP_TASK_BT_CONTROLLER_PRIO, \ + .controller_run_cpu = 0, \ + .enable_qa_test = RUN_QA_TEST, \ + .enable_bqb_test = RUN_BQB_TEST, \ + .enable_uart_hci = HCI_UART_EN, \ + .ble_hci_uart_port = DEFAULT_BT_LE_HCI_UART_PORT, \ + .ble_hci_uart_baud = DEFAULT_BT_LE_HCI_UART_BAUD, \ + .ble_hci_uart_data_bits = DEFAULT_BT_LE_HCI_UART_DATA_BITS, \ + .ble_hci_uart_stop_bits = DEFAULT_BT_LE_HCI_UART_STOP_BITS, \ + .ble_hci_uart_flow_ctrl = DEFAULT_BT_LE_HCI_UART_FLOW_CTRL, \ + .ble_hci_uart_uart_parity = DEFAULT_BT_LE_HCI_UART_PARITY, \ + .enable_tx_cca = DEFAULT_BT_LE_TX_CCA_ENABLED, \ + .cca_rssi_thresh = 256 - DEFAULT_BT_LE_CCA_RSSI_THRESH, \ + .sleep_en = NIMBLE_SLEEP_ENABLE, \ + .coex_phy_coded_tx_rx_time_limit = DEFAULT_BT_LE_COEX_PHY_CODED_TX_RX_TLIM_EFF, \ + .dis_scan_backoff = NIMBLE_DISABLE_SCAN_BACKOFF, \ + .ble_scan_classify_filter_enable = 0, \ + .main_xtal_freq = CONFIG_XTAL_FREQ, \ + .version_num = esp_ble_get_chip_rev_version(), \ + .ignore_wl_for_direct_adv = 0, \ + .csa2_select = DEFAULT_BT_LE_50_FEATURE_SUPPORT, \ + .config_magic = CONFIG_MAGIC, \ +} + +/** + * @brief Initialize BT controller to allocate task and other resource. + * This function should be called only once, before any other BT functions are called. + * @param cfg: Initial configuration of BT controller. + * @return ESP_OK - success, other - failed + */ +esp_err_t esp_bt_controller_init(esp_bt_controller_config_t *cfg); + +/** + * @brief Get BT controller is initialised/de-initialised/enabled/disabled + * @return status value + */ +esp_bt_controller_status_t esp_bt_controller_get_status(void); + +/** + * @brief Get BLE TX power + * Connection Tx power should only be get after connection created. + * @param power_type : The type of which tx power, could set Advertising/Connection/Default and etc + * @return >= 0 - Power level, < 0 - Invalid + */ +esp_power_level_t esp_ble_tx_power_get(esp_ble_power_type_t power_type); + +/** + * @brief De-initialize BT controller to free resource and delete task. + * You should stop advertising and scanning, as well as + * disconnect all existing connections before de-initializing BT controller. + * + * This function should be called only once, after any other BT functions are called. + * This function is not whole completed, esp_bt_controller_init cannot called after this function. + * @return ESP_OK - success, other - failed + */ +esp_err_t esp_bt_controller_deinit(void); + +/** + * @brief Enable BT controller. + * Due to a known issue, you cannot call esp_bt_controller_enable() a second time + * to change the controller mode dynamically. To change controller mode, call + * esp_bt_controller_disable() and then call esp_bt_controller_enable() with the new mode. + * @param mode : the mode(BLE/BT/BTDM) to enable. For compatible of API, retain this argument. + * @return ESP_OK - success, other - failed + */ +esp_err_t esp_bt_controller_enable(esp_bt_mode_t mode); + +/** + * @brief Disable BT controller + * @return ESP_OK - success, other - failed + */ +esp_err_t esp_bt_controller_disable(void); + +/** @brief esp_vhci_host_callback + * used for vhci call host function to notify what host need to do + */ +typedef struct esp_vhci_host_callback { + void (*notify_host_send_available)(void); /*!< callback used to notify that the host can send packet to controller */ + int (*notify_host_recv)(uint8_t *data, uint16_t len); /*!< callback used to notify that the controller has a packet to send to the host*/ +} esp_vhci_host_callback_t; + +/** @brief esp_vhci_host_check_send_available + * used for check actively if the host can send packet to controller or not. + * @return true for ready to send, false means cannot send packet + */ +bool esp_vhci_host_check_send_available(void); + +/** @brief esp_vhci_host_send_packet + * host send packet to controller + * + * Should not call this function from within a critical section + * or when the scheduler is suspended. + * + * @param data the packet point + * @param len the packet length + */ +void esp_vhci_host_send_packet(uint8_t *data, uint16_t len); + +/** @brief esp_vhci_host_register_callback + * register the vhci reference callback + * struct defined by vhci_host_callback structure. + * @param callback esp_vhci_host_callback type variable + * @return ESP_OK - success, ESP_FAIL - failed + */ +esp_err_t esp_vhci_host_register_callback(const esp_vhci_host_callback_t *callback); + +/** @brief esp_bt_controller_mem_release + * release the controller memory as per the mode + * + * This function releases the BSS, data and other sections of the controller to heap. The total size is about 70k bytes. + * + * esp_bt_controller_mem_release(mode) should be called only before esp_bt_controller_init() + * or after esp_bt_controller_deinit(). + * + * Note that once BT controller memory is released, the process cannot be reversed. It means you cannot use the bluetooth + * mode which you have released by this function. + * + * If your firmware will later upgrade the Bluetooth controller mode (BLE -> BT Classic or disabled -> enabled) + * then do not call this function. + * + * If the app calls esp_bt_controller_enable(ESP_BT_MODE_BLE) to use BLE only then it is safe to call + * esp_bt_controller_mem_release(ESP_BT_MODE_CLASSIC_BT) at initialization time to free unused BT Classic memory. + * + * If the mode is ESP_BT_MODE_BTDM, then it may be useful to call API esp_bt_mem_release(ESP_BT_MODE_BTDM) instead, + * which internally calls esp_bt_controller_mem_release(ESP_BT_MODE_BTDM) and additionally releases the BSS and data + * consumed by the BT/BLE host stack to heap. For more details about usage please refer to the documentation of + * esp_bt_mem_release() function + * + * @param mode : the mode want to release memory + * @return ESP_OK - success, other - failed + */ +esp_err_t esp_bt_controller_mem_release(esp_bt_mode_t mode); + +/** @brief esp_bt_mem_release + * release controller memory and BSS and data section of the BT/BLE host stack as per the mode + * + * This function first releases controller memory by internally calling esp_bt_controller_mem_release(). + * Additionally, if the mode is set to ESP_BT_MODE_BTDM, it also releases the BSS and data consumed by the BT/BLE host stack to heap + * + * Note that once BT memory is released, the process cannot be reversed. It means you cannot use the bluetooth + * mode which you have released by this function. + * + * If your firmware will later upgrade the Bluetooth controller mode (BLE -> BT Classic or disabled -> enabled) + * then do not call this function. + * + * If you never intend to use bluetooth in a current boot-up cycle, you can call esp_bt_mem_release(ESP_BT_MODE_BTDM) + * before esp_bt_controller_init or after esp_bt_controller_deinit. + * + * For example, if a user only uses bluetooth for setting the WiFi configuration, and does not use bluetooth in the rest of the product operation". + * In such cases, after receiving the WiFi configuration, you can disable/deinit bluetooth and release its memory. + * Below is the sequence of APIs to be called for such scenarios: + * + * esp_bluedroid_disable(); + * esp_bluedroid_deinit(); + * esp_bt_controller_disable(); + * esp_bt_controller_deinit(); + * esp_bt_mem_release(ESP_BT_MODE_BTDM); + * + * @param mode : the mode whose memory is to be released + * @return ESP_OK - success, other - failed + */ +esp_err_t esp_bt_mem_release(esp_bt_mode_t mode); + +/** + * @brief Returns random static address or -1 if not present. + * @return ESP_OK - success, other - failed + */ +extern int esp_ble_hw_get_static_addr(esp_ble_addr_t *addr); + +#if CONFIG_BT_LE_CONTROLLER_LOG_ENABLED +/** + * @brief dump all controller log information cached in buffer + * @param output : true for log dump, false will take no effect + */ +void esp_ble_controller_log_dump_all(bool output); +#endif // CONFIG_BT_LE_CONTROLLER_LOG_ENABLED + +#ifdef __cplusplus +} +#endif + +#endif /* __ESP_BT_H__ */ diff --git a/espradio/blobs/headers/esp32c2/esp_bt_cfg.h b/espradio/blobs/headers/esp32c2/esp_bt_cfg.h new file mode 100644 index 000000000..9bbcc5789 --- /dev/null +++ b/espradio/blobs/headers/esp32c2/esp_bt_cfg.h @@ -0,0 +1,213 @@ +/* + * SPDX-FileCopyrightText: 2015-2022 Espressif Systems (Shanghai) CO LTD + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#ifndef __ESP_BT_CFG_H__ +#define __ESP_BT_CFG_H__ + +#include +#include +#include "esp_err.h" + +#ifdef __cplusplus +extern "C" { +#endif + +#if CONFIG_BT_NIMBLE_ENABLED +#include "syscfg/syscfg.h" +#endif + +#define NIMBLE_LL_STACK_SIZE CONFIG_BT_LE_CONTROLLER_TASK_STACK_SIZE + +#if CONFIG_BT_NIMBLE_ENABLED + + #if CONFIG_BT_NIMBLE_LL_CFG_FEAT_LE_CODED_PHY + #define BLE_LL_SCAN_PHY_NUMBER_N (2) + #else + #define BLE_LL_SCAN_PHY_NUMBER_N (1) + #endif + + #define DEFAULT_BT_LE_MAX_PERIODIC_ADVERTISER_LIST MYNEWT_VAL(BLE_MAX_PERIODIC_ADVERTISER_LIST) + #define DEFAULT_BT_LE_MAX_PERIODIC_SYNCS MYNEWT_VAL(BLE_MAX_PERIODIC_SYNCS) + #define DEFAULT_BT_LE_MAX_CONNECTIONS MYNEWT_VAL(BLE_MAX_CONNECTIONS) + #define DEFAULT_BT_LE_ACL_BUF_SIZE MYNEWT_VAL(BLE_ACL_BUF_SIZE) + #define DEFAULT_BT_LE_ACL_BUF_COUNT MYNEWT_VAL(BLE_ACL_BUF_COUNT) + #define DEFAULT_BT_LE_HCI_EVT_BUF_SIZE MYNEWT_VAL(BLE_HCI_EVT_BUF_SIZE) + #define DEFAULT_BT_LE_EXT_ADV_MAX_SIZE MYNEWT_VAL(BLE_EXT_ADV_MAX_SIZE) + #define DEFAULT_BT_LE_MAX_EXT_ADV_INSTANCES MYNEWT_VAL(BLE_MULTI_ADV_INSTANCES) + #define DEFAULT_BT_NIMBLE_WHITELIST_SIZE MYNEWT_VAL(BLE_LL_WHITELIST_SIZE) + #define DEFAULT_BT_LE_HCI_EVT_HI_BUF_COUNT MYNEWT_VAL(BLE_HCI_EVT_HI_BUF_COUNT) + #define DEFAULT_BT_LE_HCI_EVT_LO_BUF_COUNT MYNEWT_VAL(BLE_HCI_EVT_LO_BUF_COUNT) + #define DEFAULT_BT_LE_COEX_PHY_CODED_TX_RX_TLIM_EFF CONFIG_BT_NIMBLE_COEX_PHY_CODED_TX_RX_TLIM_EFF + +#else + + #if CONFIG_BT_LE_LL_CFG_FEAT_LE_CODED_PHY + #define BLE_LL_SCAN_PHY_NUMBER_N (2) + #else + #define BLE_LL_SCAN_PHY_NUMBER_N (1) + #endif + + #if defined(CONFIG_BT_LE_MAX_PERIODIC_ADVERTISER_LIST) + #define DEFAULT_BT_LE_MAX_PERIODIC_ADVERTISER_LIST (CONFIG_BT_LE_MAX_PERIODIC_ADVERTISER_LIST) + #else + #define DEFAULT_BT_LE_MAX_PERIODIC_ADVERTISER_LIST (5) + #endif + + #if defined(CONFIG_BT_LE_MAX_PERIODIC_SYNCS) + #define DEFAULT_BT_LE_MAX_PERIODIC_SYNCS (CONFIG_BT_LE_MAX_PERIODIC_SYNCS) + #else + #define DEFAULT_BT_LE_MAX_PERIODIC_SYNCS (1) + #endif + + #if defined(CONFIG_BT_LE_MAX_CONNECTIONS) + #define DEFAULT_BT_LE_MAX_CONNECTIONS (CONFIG_BT_LE_MAX_CONNECTIONS) + #else + #define DEFAULT_BT_LE_MAX_CONNECTIONS (2) + #endif + + #if defined(CONFIG_BT_LE_ACL_BUF_SIZE) + #define DEFAULT_BT_LE_ACL_BUF_SIZE (CONFIG_BT_LE_ACL_BUF_SIZE) + #else + #define DEFAULT_BT_LE_ACL_BUF_SIZE (255) + #endif + + #if defined(CONFIG_BT_LE_ACL_BUF_COUNT) + #define DEFAULT_BT_LE_ACL_BUF_COUNT (CONFIG_BT_LE_ACL_BUF_COUNT) + #else + #define DEFAULT_BT_LE_ACL_BUF_COUNT (24) + #endif + + #if defined(CONFIG_BT_LE_HCI_EVT_BUF_SIZE) + #define DEFAULT_BT_LE_HCI_EVT_BUF_SIZE (CONFIG_BT_LE_HCI_EVT_BUF_SIZE) + #else + #define DEFAULT_BT_LE_HCI_EVT_BUF_SIZE (70) + #endif + + #if defined(CONFIG_BT_LE_EXT_ADV_MAX_SIZE) + #define DEFAULT_BT_LE_EXT_ADV_MAX_SIZE (CONFIG_BT_LE_EXT_ADV_MAX_SIZE) + #else + #define DEFAULT_BT_LE_EXT_ADV_MAX_SIZE (31) + #endif + + #if defined(CONFIG_BT_LE_MAX_EXT_ADV_INSTANCES) + #define DEFAULT_BT_LE_MAX_EXT_ADV_INSTANCES (CONFIG_BT_LE_MAX_EXT_ADV_INSTANCES) + #else + #define DEFAULT_BT_LE_MAX_EXT_ADV_INSTANCES (1) + #endif + + #if defined(CONFIG_BT_LE_WHITELIST_SIZE) + #define DEFAULT_BT_NIMBLE_WHITELIST_SIZE (CONFIG_BT_LE_WHITELIST_SIZE) + #else + #define DEFAULT_BT_NIMBLE_WHITELIST_SIZE (12) + #endif + + #if defined(CONFIG_BT_LE_HCI_EVT_HI_BUF_COUNT) + #define DEFAULT_BT_LE_HCI_EVT_HI_BUF_COUNT (CONFIG_BT_LE_HCI_EVT_HI_BUF_COUNT) + #else + #define DEFAULT_BT_LE_HCI_EVT_HI_BUF_COUNT (30) + #endif + + #if defined(CONFIG_BT_LE_HCI_EVT_LO_BUF_COUNT) + #define DEFAULT_BT_LE_HCI_EVT_LO_BUF_COUNT (CONFIG_BT_LE_HCI_EVT_LO_BUF_COUNT) + #else + #define DEFAULT_BT_LE_HCI_EVT_LO_BUF_COUNT (8) + #endif + + #define DEFAULT_BT_LE_COEX_PHY_CODED_TX_RX_TLIM_EFF CONFIG_BT_LE_COEX_PHY_CODED_TX_RX_TLIM_EFF + +#endif + + + +#ifdef CONFIG_BT_LE_HCI_INTERFACE_USE_UART +#define HCI_UART_EN CONFIG_BT_LE_HCI_INTERFACE_USE_UART +#else +#define HCI_UART_EN 0 // hci ram mode +#endif + +#ifdef CONFIG_BT_LE_SLEEP_ENABLE +#define NIMBLE_SLEEP_ENABLE CONFIG_BT_LE_SLEEP_ENABLE +#else +#define NIMBLE_SLEEP_ENABLE 0 +#endif + + +#ifdef CONFIG_BT_LE_TX_CCA_ENABLED + #define DEFAULT_BT_LE_TX_CCA_ENABLED (CONFIG_BT_LE_TX_CCA_ENABLED) +#else + #define DEFAULT_BT_LE_TX_CCA_ENABLED (0) +#endif + +#ifdef CONFIG_BT_LE_CCA_RSSI_THRESH + #define DEFAULT_BT_LE_CCA_RSSI_THRESH (CONFIG_BT_LE_CCA_RSSI_THRESH) +#else + #define DEFAULT_BT_LE_CCA_RSSI_THRESH (50) +#endif + +#define DEFAULT_BT_LE_SCAN_RSP_DATA_MAX_LEN_N DEFAULT_BT_LE_EXT_ADV_MAX_SIZE + + +#if HCI_UART_EN + #define DEFAULT_BT_LE_HCI_UART_TX_PIN (CONFIG_BT_LE_HCI_UART_TX_PIN) + #define DEFAULT_BT_LE_HCI_UART_RX_PIN (CONFIG_BT_LE_HCI_UART_RX_PIN) + #define DEFAULT_BT_LE_HCI_UART_PORT (CONFIG_BT_LE_HCI_UART_PORT) + #define DEFAULT_BT_LE_HCI_UART_BAUD (CONFIG_BT_LE_HCI_UART_BAUD) + #define DEFAULT_BT_LE_HCI_UART_DATA_BITS (UART_DATA_8_BITS) + #define DEFAULT_BT_LE_HCI_UART_STOP_BITS (UART_STOP_BITS_1) + #define DEFAULT_BT_LE_HCI_UART_PARITY (0) + #define DEFAULT_BT_LE_HCI_UART_TASK_STACK_SIZE (CONFIG_BT_LE_HCI_UART_TASK_STACK_SIZE) + #define DEFAULT_BT_LE_HCI_UART_FLOW_CTRL (0) +#else + #define DEFAULT_BT_LE_HCI_UART_TX_PIN (0) + #define DEFAULT_BT_LE_HCI_UART_RX_PIN (0) + #define DEFAULT_BT_LE_HCI_UART_PORT (0) + #define DEFAULT_BT_LE_HCI_UART_BAUD (0) + #define DEFAULT_BT_LE_HCI_UART_DATA_BITS (0) + #define DEFAULT_BT_LE_HCI_UART_STOP_BITS (0) + #define DEFAULT_BT_LE_HCI_UART_PARITY (0) + #define DEFAULT_BT_LE_HCI_UART_TASK_STACK_SIZE (0) + #define DEFAULT_BT_LE_HCI_UART_FLOW_CTRL (0) +#endif + +/* Unchanged configuration */ + +#define BLE_LL_CTRL_PROC_TIMEOUT_MS_N (40000) /* ms */ + +#define BLE_LL_CFG_NUM_HCI_CMD_PKTS_N (1) + +#define BLE_LL_SCHED_ADV_MAX_USECS_N (852) + +#define BLE_LL_SCHED_DIRECT_ADV_MAX_USECS_N (502) + +#define BLE_LL_SCHED_MAX_ADV_PDU_USECS_N (376) + +#define BLE_LL_SUB_VERS_NR_N (0x0000) + +#define BLE_LL_JITTER_USECS_N (16) + +#define BLE_PHY_MAX_PWR_DBM_N (10) + +#define BLE_LL_CONN_DEF_AUTH_PYLD_TMO_N (3000) + +#ifdef CONFIG_XTAL_FREQ_26 + #define RTC_FREQ_N (40000) /* in Hz */ +#else + #define RTC_FREQ_N (32000) /* in Hz */ +#endif // CONFIG_XTAL_FREQ_26 + +#define BLE_LL_TX_PWR_DBM_N (9) + + +#define RUN_BQB_TEST (0) +#define RUN_QA_TEST (0) +#define NIMBLE_DISABLE_SCAN_BACKOFF (0) + + +#ifdef __cplusplus +} +#endif + +#endif /* __ESP_BT_CFG_H__ */ diff --git a/espradio/blobs/headers/esp32c2/phy_init_data.h b/espradio/blobs/headers/esp32c2/phy_init_data.h new file mode 100644 index 000000000..212cd582d --- /dev/null +++ b/espradio/blobs/headers/esp32c2/phy_init_data.h @@ -0,0 +1,182 @@ +/* + * SPDX-FileCopyrightText: 2016-2021 Espressif Systems (Shanghai) CO LTD + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#ifndef PHY_INIT_DATA_H +#define PHY_INIT_DATA_H /* don't use #pragma once here, we compile this file sometimes */ +#include "esp_phy_init.h" +#include "sdkconfig.h" + +#ifdef __cplusplus +extern "C" { +#endif + +// constrain a value between 'low' and 'high', inclusive +#define LIMIT(val, low, high) ((val < low) ? low : (val > high) ? high : val) + +#define PHY_INIT_MAGIC "PHYINIT" + +// define the lowest tx power as LOWEST_PHY_TX_POWER +#define PHY_TX_POWER_LOWEST LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 52) +#define PHY_TX_POWER_OFFSET 2 +#define PHY_TX_POWER_NUM 14 + +#if CONFIG_ESP_PHY_MULTIPLE_INIT_DATA_BIN +#define PHY_CRC_ALGORITHM 1 +#define PHY_COUNTRY_CODE_LEN 2 +#define PHY_INIT_DATA_TYPE_OFFSET 126 +#define PHY_SUPPORT_MULTIPLE_BIN_OFFSET 125 +#endif + +static const char __attribute__((section(".rodata"))) phy_init_magic_pre[] = PHY_INIT_MAGIC; + +/** + * @brief Structure containing default recommended PHY initialization parameters. + */ +static const esp_phy_init_data_t phy_init_data= { { + 0x00, + 0x00, + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x50), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x50), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x50), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x4c), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x4c), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x48), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x4c), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x48), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x48), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x44), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x4a), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x46), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x46), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x42), + 0x00, + 0x00, + 0x00, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0x74 +} }; + +static const char __attribute__((section(".rodata"))) phy_init_magic_post[] = PHY_INIT_MAGIC; + +#if CONFIG_ESP_PHY_MULTIPLE_INIT_DATA_BIN +/** + * @brief PHY init data control infomation structure + */ +typedef struct { + uint8_t control_info_checksum[4]; /*!< 4-byte control infomation checksum */ + uint8_t multiple_bin_checksum[4]; /*!< 4-byte multiple bin checksum */ + uint8_t check_algorithm; /*!< check algorithm */ + uint8_t version; /*!< PHY init data bin version */ + uint8_t number; /*!< PHY init data bin number */ + uint8_t length[2]; /*!< Length of each PHY init data bin */ + uint8_t reserved[19]; /*!< 19-byte reserved */ +} __attribute__ ((packed)) phy_control_info_data_t; + +/** + * @brief Country corresponds to PHY init data type structure + */ +typedef struct { + char cc[PHY_COUNTRY_CODE_LEN]; + uint8_t type; +} phy_country_to_bin_type_t; +#endif + +#ifdef __cplusplus +} +#endif + +#endif /* PHY_INIT_DATA_H */ diff --git a/espradio/blobs/headers/esp32c2/sdkconfig.h b/espradio/blobs/headers/esp32c2/sdkconfig.h new file mode 100644 index 000000000..57ffbf93a --- /dev/null +++ b/espradio/blobs/headers/esp32c2/sdkconfig.h @@ -0,0 +1,840 @@ +/* + * Automatically generated file. DO NOT EDIT. + * Espressif IoT Development Framework (ESP-IDF) 5.1.2 Configuration Header + */ +#pragma once +#define CONFIG_SOC_ADC_SUPPORTED 1 +#define CONFIG_SOC_DEDICATED_GPIO_SUPPORTED 1 +#define CONFIG_SOC_UART_SUPPORTED 1 +#define CONFIG_SOC_GDMA_SUPPORTED 1 +#define CONFIG_SOC_GPTIMER_SUPPORTED 1 +#define CONFIG_SOC_BT_SUPPORTED 1 +#define CONFIG_SOC_WIFI_SUPPORTED 1 +#define CONFIG_SOC_ASYNC_MEMCPY_SUPPORTED 1 +#define CONFIG_SOC_SUPPORTS_SECURE_DL_MODE 1 +#define CONFIG_SOC_EFUSE_CONSISTS_OF_ONE_KEY_BLOCK 1 +#define CONFIG_SOC_TEMP_SENSOR_SUPPORTED 1 +#define CONFIG_SOC_LEDC_SUPPORTED 1 +#define CONFIG_SOC_I2C_SUPPORTED 1 +#define CONFIG_SOC_GPSPI_SUPPORTED 1 +#define CONFIG_SOC_SHA_SUPPORTED 1 +#define CONFIG_SOC_ECC_SUPPORTED 1 +#define CONFIG_SOC_FLASH_ENC_SUPPORTED 1 +#define CONFIG_SOC_SECURE_BOOT_SUPPORTED 1 +#define CONFIG_SOC_SYSTIMER_SUPPORTED 1 +#define CONFIG_SOC_BOD_SUPPORTED 1 +#define CONFIG_SOC_XTAL_SUPPORT_26M 1 +#define CONFIG_SOC_XTAL_SUPPORT_40M 1 +#define CONFIG_SOC_ADC_DIG_CTRL_SUPPORTED 1 +#define CONFIG_SOC_ADC_DIG_IIR_FILTER_SUPPORTED 1 +#define CONFIG_SOC_ADC_MONITOR_SUPPORTED 1 +#define CONFIG_SOC_ADC_PERIPH_NUM 1 +#define CONFIG_SOC_ADC_MAX_CHANNEL_NUM 5 +#define CONFIG_SOC_ADC_ATTEN_NUM 4 +#define CONFIG_SOC_ADC_DIGI_CONTROLLER_NUM 1 +#define CONFIG_SOC_ADC_PATT_LEN_MAX 8 +#define CONFIG_SOC_ADC_DIGI_MIN_BITWIDTH 12 +#define CONFIG_SOC_ADC_DIGI_MAX_BITWIDTH 12 +#define CONFIG_SOC_ADC_DIGI_IIR_FILTER_NUM 2 +#define CONFIG_SOC_ADC_DIGI_MONITOR_NUM 2 +#define CONFIG_SOC_ADC_SAMPLE_FREQ_THRES_HIGH 83333 +#define CONFIG_SOC_ADC_SAMPLE_FREQ_THRES_LOW 611 +#define CONFIG_SOC_ADC_RTC_MIN_BITWIDTH 12 +#define CONFIG_SOC_ADC_RTC_MAX_BITWIDTH 12 +#define CONFIG_SOC_ADC_CALIBRATION_V1_SUPPORTED 1 +#define CONFIG_SOC_ADC_SELF_HW_CALI_SUPPORTED 1 +#define CONFIG_SOC_BROWNOUT_RESET_SUPPORTED 1 +#define CONFIG_SOC_SHARED_IDCACHE_SUPPORTED 1 +#define CONFIG_SOC_CPU_CORES_NUM 1 +#define CONFIG_SOC_CPU_INTR_NUM 32 +#define CONFIG_SOC_CPU_HAS_FLEXIBLE_INTC 1 +#define CONFIG_SOC_CPU_BREAKPOINTS_NUM 2 +#define CONFIG_SOC_CPU_WATCHPOINTS_NUM 2 +#define CONFIG_SOC_CPU_WATCHPOINT_MAX_REGION_SIZE 0x80000000 +#define CONFIG_SOC_CPU_IDRAM_SPLIT_USING_PMP 1 +#define CONFIG_SOC_GDMA_GROUPS 1 +#define CONFIG_SOC_GDMA_PAIRS_PER_GROUP 1 +#define CONFIG_SOC_GDMA_TX_RX_SHARE_INTERRUPT 1 +#define CONFIG_SOC_GPIO_PORT 1 +#define CONFIG_SOC_GPIO_PIN_COUNT 21 +#define CONFIG_SOC_GPIO_SUPPORT_PIN_GLITCH_FILTER 1 +#define CONFIG_SOC_GPIO_FILTER_CLK_SUPPORT_APB 1 +#define CONFIG_SOC_GPIO_SUPPORT_FORCE_HOLD 1 +#define CONFIG_SOC_GPIO_SUPPORT_DEEPSLEEP_WAKEUP 1 +#define CONFIG_SOC_GPIO_DEEP_SLEEP_WAKE_VALID_GPIO_MASK 0 +#define CONFIG_SOC_GPIO_VALID_DIGITAL_IO_PAD_MASK 0x00000000001FFFC0 +#define CONFIG_SOC_DEDIC_GPIO_OUT_CHANNELS_NUM 8 +#define CONFIG_SOC_DEDIC_GPIO_IN_CHANNELS_NUM 8 +#define CONFIG_SOC_DEDIC_PERIPH_ALWAYS_ENABLE 1 +#define CONFIG_SOC_I2C_NUM 1 +#define CONFIG_SOC_I2C_FIFO_LEN 16 +#define CONFIG_SOC_I2C_CMD_REG_NUM 8 +#define CONFIG_SOC_I2C_SUPPORT_HW_CLR_BUS 1 +#define CONFIG_SOC_I2C_SUPPORT_XTAL 1 +#define CONFIG_SOC_I2C_SUPPORT_RTC 1 +#define CONFIG_SOC_LEDC_SUPPORT_PLL_DIV_CLOCK 1 +#define CONFIG_SOC_LEDC_SUPPORT_XTAL_CLOCK 1 +#define CONFIG_SOC_LEDC_CHANNEL_NUM 6 +#define CONFIG_SOC_LEDC_TIMER_BIT_WIDTH 14 +#define CONFIG_SOC_LEDC_SUPPORT_FADE_STOP 1 +#define CONFIG_SOC_MMU_PAGE_SIZE_CONFIGURABLE 1 +#define CONFIG_SOC_MMU_LINEAR_ADDRESS_REGION_NUM 1 +#define CONFIG_SOC_MMU_PERIPH_NUM 1 +#define CONFIG_SOC_MPU_MIN_REGION_SIZE 0x20000000 +#define CONFIG_SOC_MPU_REGIONS_MAX_NUM 8 +#define CONFIG_SOC_RTC_CNTL_CPU_PD_DMA_BUS_WIDTH 128 +#define CONFIG_SOC_RTC_CNTL_CPU_PD_REG_FILE_NUM 108 +#define CONFIG_SOC_RTCIO_PIN_COUNT 0 +#define CONFIG_SOC_RSA_MAX_BIT_LEN 3072 +#define CONFIG_SOC_SHA_SUPPORT_RESUME 1 +#define CONFIG_SOC_SHA_SUPPORT_SHA1 1 +#define CONFIG_SOC_SHA_SUPPORT_SHA224 1 +#define CONFIG_SOC_SHA_SUPPORT_SHA256 1 +#define CONFIG_SOC_SPI_PERIPH_NUM 2 +#define CONFIG_SOC_SPI_MAX_CS_NUM 6 +#define CONFIG_SOC_SPI_MAXIMUM_BUFFER_SIZE 64 +#define CONFIG_SOC_SPI_SUPPORT_DDRCLK 1 +#define CONFIG_SOC_SPI_SLAVE_SUPPORT_SEG_TRANS 1 +#define CONFIG_SOC_SPI_SUPPORT_CD_SIG 1 +#define CONFIG_SOC_SPI_SUPPORT_CONTINUOUS_TRANS 1 +#define CONFIG_SOC_SPI_SUPPORT_SLAVE_HD_VER2 1 +#define CONFIG_SOC_SPI_SUPPORT_CLK_XTAL 1 +#define CONFIG_SOC_SPI_SUPPORT_CLK_PLL_F40M 1 +#define CONFIG_SOC_SPI_PERIPH_SUPPORT_CONTROL_DUMMY_OUT 1 +#define CONFIG_SOC_MEMSPI_IS_INDEPENDENT 1 +#define CONFIG_SOC_SPI_MAX_PRE_DIVIDER 16 +#define CONFIG_SOC_SPI_MEM_SUPPORT_AUTO_WAIT_IDLE 1 +#define CONFIG_SOC_SPI_MEM_SUPPORT_AUTO_SUSPEND 1 +#define CONFIG_SOC_SPI_MEM_SUPPORT_AUTO_RESUME 1 +#define CONFIG_SOC_SPI_MEM_SUPPORT_IDLE_INTR 1 +#define CONFIG_SOC_SPI_MEM_SUPPORT_SW_SUSPEND 1 +#define CONFIG_SOC_SPI_MEM_SUPPORT_CHECK_SUS 1 +#define CONFIG_SOC_SPI_MEM_SUPPORT_WRAP 1 +#define CONFIG_SOC_MEMSPI_SRC_FREQ_60M_SUPPORTED 1 +#define CONFIG_SOC_MEMSPI_SRC_FREQ_30M_SUPPORTED 1 +#define CONFIG_SOC_MEMSPI_SRC_FREQ_20M_SUPPORTED 1 +#define CONFIG_SOC_MEMSPI_SRC_FREQ_15M_SUPPORTED 1 +#define CONFIG_SOC_SYSTIMER_COUNTER_NUM 2 +#define CONFIG_SOC_SYSTIMER_ALARM_NUM 3 +#define CONFIG_SOC_SYSTIMER_BIT_WIDTH_LO 32 +#define CONFIG_SOC_SYSTIMER_BIT_WIDTH_HI 20 +#define CONFIG_SOC_SYSTIMER_FIXED_DIVIDER 1 +#define CONFIG_SOC_SYSTIMER_INT_LEVEL 1 +#define CONFIG_SOC_SYSTIMER_ALARM_MISS_COMPENSATE 1 +#define CONFIG_SOC_TIMER_GROUPS 1 +#define CONFIG_SOC_TIMER_GROUP_TIMERS_PER_GROUP 1 +#define CONFIG_SOC_TIMER_GROUP_COUNTER_BIT_WIDTH 54 +#define CONFIG_SOC_TIMER_GROUP_SUPPORT_XTAL 1 +#define CONFIG_SOC_TIMER_GROUP_TOTAL_TIMERS 1 +#define CONFIG_SOC_MWDT_SUPPORT_XTAL 1 +#define CONFIG_SOC_EFUSE_DIS_DOWNLOAD_ICACHE 1 +#define CONFIG_SOC_EFUSE_DIS_PAD_JTAG 1 +#define CONFIG_SOC_EFUSE_DIS_DIRECT_BOOT 1 +#define CONFIG_SOC_SECURE_BOOT_V2_ECC 1 +#define CONFIG_SOC_EFUSE_SECURE_BOOT_KEY_DIGESTS 1 +#define CONFIG_SOC_FLASH_ENCRYPTED_XTS_AES_BLOCK_MAX 32 +#define CONFIG_SOC_FLASH_ENCRYPTION_XTS_AES 1 +#define CONFIG_SOC_FLASH_ENCRYPTION_XTS_AES_OPTIONS 1 +#define CONFIG_SOC_FLASH_ENCRYPTION_XTS_AES_128 1 +#define CONFIG_SOC_FLASH_ENCRYPTION_XTS_AES_128_DERIVED 1 +#define CONFIG_SOC_UART_NUM 2 +#define CONFIG_SOC_UART_FIFO_LEN 128 +#define CONFIG_SOC_UART_BITRATE_MAX 5000000 +#define CONFIG_SOC_UART_SUPPORT_WAKEUP_INT 1 +#define CONFIG_SOC_UART_SUPPORT_PLL_F40M_CLK 1 +#define CONFIG_SOC_UART_SUPPORT_RTC_CLK 1 +#define CONFIG_SOC_UART_SUPPORT_XTAL_CLK 1 +#define CONFIG_SOC_UART_SUPPORT_FSM_TX_WAIT_SEND 1 +#define CONFIG_SOC_COEX_HW_PTI 1 +#define CONFIG_SOC_EXTERNAL_COEX_ADVANCE 1 +#define CONFIG_SOC_PHY_DIG_REGS_MEM_SIZE 21 +#define CONFIG_SOC_WIFI_LIGHT_SLEEP_CLK_WIDTH 12 +#define CONFIG_SOC_PM_SUPPORT_WIFI_WAKEUP 1 +#define CONFIG_SOC_PM_SUPPORT_BT_WAKEUP 1 +#define CONFIG_SOC_PM_SUPPORT_RC_FAST_PD 1 +#define CONFIG_SOC_PM_SUPPORT_VDDSDIO_PD 1 +#define CONFIG_SOC_CLK_RC_FAST_D256_SUPPORTED 1 +#define CONFIG_SOC_RTC_SLOW_CLK_SUPPORT_RC_FAST_D256 1 +#define CONFIG_SOC_CLK_RC_FAST_SUPPORT_CALIBRATION 1 +#define CONFIG_SOC_CLK_OSC_SLOW_SUPPORTED 1 +#define CONFIG_SOC_WIFI_HW_TSF 1 +#define CONFIG_SOC_WIFI_FTM_SUPPORT 1 +#define CONFIG_SOC_WIFI_SUPPORT_VARIABLE_BEACON_WINDOW 1 +#define CONFIG_SOC_BLE_SUPPORTED 1 +#define CONFIG_SOC_ESP_NIMBLE_CONTROLLER 1 +#define CONFIG_SOC_BLE_50_SUPPORTED 1 +#define CONFIG_SOC_BLE_DEVICE_PRIVACY_SUPPORTED 1 +#define CONFIG_SOC_BLUFI_SUPPORTED 1 +#define CONFIG_SOC_BLE_PERIODIC_ADV_ENH_SUPPORTED 1 +#define CONFIG_SOC_PHY_IMPROVE_RX_11B 1 +#define CONFIG_SOC_PHY_COMBO_MODULE 1 +#define CONFIG_IDF_CMAKE 1 +#define CONFIG_IDF_TARGET_ARCH_RISCV 1 +#define CONFIG_IDF_TARGET_ARCH "riscv" +#define CONFIG_IDF_TARGET "esp32c2" +#define CONFIG_IDF_TARGET_ESP32C2 1 +#define CONFIG_IDF_FIRMWARE_CHIP_ID 0x000C +#define CONFIG_APP_BUILD_TYPE_APP_2NDBOOT 1 +#define CONFIG_APP_BUILD_GENERATE_BINARIES 1 +#define CONFIG_APP_BUILD_BOOTLOADER 1 +#define CONFIG_APP_BUILD_USE_FLASH_SECTIONS 1 +#define CONFIG_BOOTLOADER_OFFSET_IN_FLASH 0x0 +#define CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_SIZE 1 +#define CONFIG_BOOTLOADER_LOG_LEVEL_INFO 1 +#define CONFIG_BOOTLOADER_LOG_LEVEL 3 +#define CONFIG_BOOTLOADER_REGION_PROTECTION_ENABLE 1 +#define CONFIG_BOOTLOADER_WDT_ENABLE 1 +#define CONFIG_BOOTLOADER_WDT_TIME_MS 9000 +#define CONFIG_BOOTLOADER_FLASH_XMC_SUPPORT 1 +#define CONFIG_SECURE_BOOT_V2_ECC_SUPPORTED 1 +#define CONFIG_SECURE_BOOT_V2_PREFERRED 1 +#define CONFIG_SECURE_ROM_DL_MODE_ENABLED 1 +#define CONFIG_APP_COMPILE_TIME_DATE 1 +#define CONFIG_APP_RETRIEVE_LEN_ELF_SHA 16 +#define CONFIG_ESP_ROM_HAS_CRC_LE 1 +#define CONFIG_ESP_ROM_HAS_CRC_BE 1 +#define CONFIG_ESP_ROM_UART_CLK_IS_XTAL 1 +#define CONFIG_ESP_ROM_HAS_RETARGETABLE_LOCKING 1 +#define CONFIG_ESP_ROM_GET_CLK_FREQ 1 +#define CONFIG_ESP_ROM_HAS_RVFPLIB 1 +#define CONFIG_ESP_ROM_HAS_HAL_WDT 1 +#define CONFIG_ESP_ROM_HAS_HAL_SYSTIMER 1 +#define CONFIG_ESP_ROM_HAS_HEAP_TLSF 1 +#define CONFIG_ESP_ROM_HAS_LAYOUT_TABLE 1 +#define CONFIG_ESP_ROM_HAS_SPI_FLASH 1 +#define CONFIG_ESP_ROM_HAS_NEWLIB_NANO_FORMAT 1 +#define CONFIG_ESP_ROM_NEEDS_SET_CACHE_MMU_SIZE 1 +#define CONFIG_ESP_ROM_RAM_APP_NEEDS_MMU_INIT 1 +#define CONFIG_ESP_ROM_HAS_MBEDTLS_CRYPTO_LIB 1 +#define CONFIG_BOOT_ROM_LOG_ALWAYS_ON 1 +#define CONFIG_ESPTOOLPY_FLASHMODE_DIO 1 +#define CONFIG_ESPTOOLPY_FLASH_SAMPLE_MODE_STR 1 +#define CONFIG_ESPTOOLPY_FLASHMODE "dio" +#define CONFIG_ESPTOOLPY_FLASHFREQ_60M 1 +#define CONFIG_ESPTOOLPY_FLASHFREQ "60m" +#define CONFIG_ESPTOOLPY_FLASHSIZE_2MB 1 +#define CONFIG_ESPTOOLPY_FLASHSIZE "2MB" +#define CONFIG_ESPTOOLPY_BEFORE_RESET 1 +#define CONFIG_ESPTOOLPY_BEFORE "default_reset" +#define CONFIG_ESPTOOLPY_AFTER_RESET 1 +#define CONFIG_ESPTOOLPY_AFTER "hard_reset" +#define CONFIG_ESPTOOLPY_MONITOR_BAUD 115200 +#define CONFIG_PARTITION_TABLE_SINGLE_APP 1 +#define CONFIG_PARTITION_TABLE_CUSTOM_FILENAME "partitions.csv" +#define CONFIG_PARTITION_TABLE_FILENAME "partitions_singleapp.csv" +#define CONFIG_PARTITION_TABLE_OFFSET 0x8000 +#define CONFIG_PARTITION_TABLE_MD5 1 +#define CONFIG_COMPILER_OPTIMIZATION_SIZE 1 +#define CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_ENABLE 1 +#define CONFIG_COMPILER_FLOAT_LIB_FROM_RVFPLIB 1 +#define CONFIG_COMPILER_OPTIMIZATION_ASSERTION_LEVEL 2 +#define CONFIG_COMPILER_HIDE_PATHS_MACROS 1 +#define CONFIG_COMPILER_STACK_CHECK_MODE_NONE 1 +#define CONFIG_APPTRACE_DEST_NONE 1 +#define CONFIG_APPTRACE_DEST_UART_NONE 1 +#define CONFIG_APPTRACE_UART_TASK_PRIO 1 +#define CONFIG_APPTRACE_LOCK_ENABLE 1 +#define CONFIG_BT_ENABLED 1 +#define CONFIG_BT_BLUEDROID_ENABLED 1 +#define CONFIG_BT_CONTROLLER_ENABLED 1 +#define CONFIG_BT_BTC_TASK_STACK_SIZE 3072 +#define CONFIG_BT_BLUEDROID_PINNED_TO_CORE 0 +#define CONFIG_BT_BTU_TASK_STACK_SIZE 4096 +#define CONFIG_BT_BLE_ENABLED 1 +#define CONFIG_BT_GATTS_ENABLE 1 +#define CONFIG_BT_GATT_MAX_SR_PROFILES 8 +#define CONFIG_BT_GATT_MAX_SR_ATTRIBUTES 100 +#define CONFIG_BT_GATTS_SEND_SERVICE_CHANGE_AUTO 1 +#define CONFIG_BT_GATTS_SEND_SERVICE_CHANGE_MODE 0 +#define CONFIG_BT_GATTC_ENABLE 1 +#define CONFIG_BT_GATTC_MAX_CACHE_CHAR 40 +#define CONFIG_BT_GATTC_NOTIF_REG_MAX 5 +#define CONFIG_BT_GATTC_CONNECT_RETRY_COUNT 3 +#define CONFIG_BT_BLE_SMP_ENABLE 1 +#define CONFIG_BT_LOG_HCI_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_HCI_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_BTM_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_BTM_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_L2CAP_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_L2CAP_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_RFCOMM_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_RFCOMM_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_SDP_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_SDP_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_GAP_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_GAP_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_BNEP_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_BNEP_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_PAN_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_PAN_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_A2D_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_A2D_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_AVDT_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_AVDT_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_AVCT_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_AVCT_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_AVRC_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_AVRC_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_MCA_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_MCA_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_HID_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_HID_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_APPL_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_APPL_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_GATT_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_GATT_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_SMP_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_SMP_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_BTIF_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_BTIF_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_BTC_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_BTC_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_OSI_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_OSI_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_BLUFI_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_BLUFI_TRACE_LEVEL 2 +#define CONFIG_BT_ACL_CONNECTIONS 4 +#define CONFIG_BT_MULTI_CONNECTION_ENBALE 1 +#define CONFIG_BT_SMP_ENABLE 1 +#define CONFIG_BT_BLE_ESTAB_LINK_CONN_TOUT 30 +#define CONFIG_BT_MAX_DEVICE_NAME_LEN 32 +#define CONFIG_BT_BLE_RPA_TIMEOUT 900 +#define CONFIG_BT_BLE_50_FEATURES_SUPPORTED 1 +#define CONFIG_BT_LE_HCI_INTERFACE_USE_RAM 1 +#define CONFIG_BT_LE_CONTROLLER_NPL_OS_PORTING_SUPPORT 1 +#define CONFIG_BT_LE_50_FEATURE_SUPPORT 1 +#define CONFIG_BT_LE_LL_CFG_FEAT_LE_2M_PHY 1 +#define CONFIG_BT_LE_LL_CFG_FEAT_LE_CODED_PHY 1 +#define CONFIG_BT_LE_EXT_ADV 1 +#define CONFIG_BT_LE_MAX_EXT_ADV_INSTANCES 1 +#define CONFIG_BT_LE_EXT_ADV_MAX_SIZE 1650 +#define CONFIG_BT_LE_ENABLE_PERIODIC_ADV 1 +#define CONFIG_BT_LE_PERIODIC_ADV_SYNC_TRANSFER 1 +#define CONFIG_BT_LE_MAX_PERIODIC_SYNCS 1 +#define CONFIG_BT_LE_MAX_PERIODIC_ADVERTISER_LIST 5 +#define CONFIG_BT_LE_MSYS_1_BLOCK_COUNT 12 +#define CONFIG_BT_LE_MSYS_1_BLOCK_SIZE 256 +#define CONFIG_BT_LE_MSYS_2_BLOCK_COUNT 24 +#define CONFIG_BT_LE_MSYS_2_BLOCK_SIZE 320 +#define CONFIG_BT_LE_ACL_BUF_COUNT 10 +#define CONFIG_BT_LE_ACL_BUF_SIZE 517 +#define CONFIG_BT_LE_HCI_EVT_BUF_SIZE 257 +#define CONFIG_BT_LE_HCI_EVT_HI_BUF_COUNT 30 +#define CONFIG_BT_LE_HCI_EVT_LO_BUF_COUNT 8 +#define CONFIG_BT_LE_CONTROLLER_TASK_STACK_SIZE 4096 +#define CONFIG_BT_LE_LL_RESOLV_LIST_SIZE 4 +#define CONFIG_BT_LE_SECURITY_ENABLE 1 +#define CONFIG_BT_LE_SM_LEGACY 1 +#define CONFIG_BT_LE_SM_SC 1 +#define CONFIG_BT_LE_LL_CFG_FEAT_LE_ENCRYPTION 1 +#define CONFIG_BT_LE_CRYPTO_STACK_MBEDTLS 1 +#define CONFIG_BT_LE_WHITELIST_SIZE 12 +#define CONFIG_BT_LE_LL_DUP_SCAN_LIST_COUNT 20 +#define CONFIG_BT_LE_LL_SCA 60 +#define CONFIG_BT_LE_MAX_CONNECTIONS 2 +#define CONFIG_BT_LE_COEX_PHY_CODED_TX_RX_TLIM_DIS 1 +#define CONFIG_BT_LE_COEX_PHY_CODED_TX_RX_TLIM_EFF 0 +#define CONFIG_BT_LE_USE_ESP_TIMER 1 +#define CONFIG_BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_SUPP 1 +#define CONFIG_BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_NUM 100 +#define CONFIG_BT_CTRL_BLE_ADV_REPORT_DISCARD_THRSHOLD 20 +#define CONFIG_BT_LE_RELEASE_IRAM_SUPPORTED 1 +#define CONFIG_SPI_MASTER_ISR_IN_IRAM 1 +#define CONFIG_SPI_SLAVE_ISR_IN_IRAM 1 +#define CONFIG_GPTIMER_ISR_HANDLER_IN_IRAM 1 +#define CONFIG_EFUSE_MAX_BLK_LEN 256 +#define CONFIG_ESP_TLS_USING_MBEDTLS 1 +#define CONFIG_ESP_COEX_SW_COEXIST_ENABLE 1 +#define CONFIG_ESP_ERR_TO_NAME_LOOKUP 1 +#define CONFIG_ETH_ENABLED 1 +#define CONFIG_ETH_USE_SPI_ETHERNET 1 +#define CONFIG_ESP_EVENT_POST_FROM_ISR 1 +#define CONFIG_ESP_EVENT_POST_FROM_IRAM_ISR 1 +#define CONFIG_ESP_HTTP_CLIENT_ENABLE_HTTPS 1 +#define CONFIG_HTTPD_MAX_REQ_HDR_LEN 512 +#define CONFIG_HTTPD_MAX_URI_LEN 512 +#define CONFIG_HTTPD_ERR_RESP_NO_DELAY 1 +#define CONFIG_HTTPD_PURGE_BUF_LEN 32 +#define CONFIG_ESP32C2_REV_MIN_1 1 +#define CONFIG_ESP32C2_REV_MIN_FULL 100 +#define CONFIG_ESP_REV_MIN_FULL 100 +#define CONFIG_ESP32C2_REV_MAX_FULL 199 +#define CONFIG_ESP_REV_MAX_FULL 199 +#define CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_STA 1 +#define CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_AP 1 +#define CONFIG_ESP_MAC_ADDR_UNIVERSE_BT 1 +#define CONFIG_ESP_MAC_ADDR_UNIVERSE_ETH 1 +#define CONFIG_ESP_MAC_UNIVERSAL_MAC_ADDRESSES_FOUR 1 +#define CONFIG_ESP32C2_UNIVERSAL_MAC_ADDRESSES_FOUR 1 +#define CONFIG_ESP32C2_UNIVERSAL_MAC_ADDRESSES 4 +#define CONFIG_ESP_SLEEP_FLASH_LEAKAGE_WORKAROUND 1 +#define CONFIG_ESP_SLEEP_MSPI_NEED_ALL_IO_PU 1 +#define CONFIG_ESP_SLEEP_GPIO_RESET_WORKAROUND 1 +#define CONFIG_ESP_SLEEP_WAIT_FLASH_READY_EXTRA_DELAY 0 +#define CONFIG_ESP_SLEEP_GPIO_ENABLE_INTERNAL_RESISTORS 1 +#define CONFIG_RTC_CLK_SRC_INT_RC 1 +#define CONFIG_RTC_CLK_CAL_CYCLES 1024 +#define CONFIG_PERIPH_CTRL_FUNC_IN_IRAM 1 +#define CONFIG_XTAL_FREQ_40 1 +#define CONFIG_XTAL_FREQ 40 +#define CONFIG_LCD_PANEL_IO_FORMAT_BUF_SIZE 32 +#define CONFIG_ESP_NETIF_IP_LOST_TIMER_INTERVAL 120 +#define CONFIG_ESP_NETIF_TCPIP_LWIP 1 +#define CONFIG_ESP_NETIF_USES_TCPIP_WITH_BSD_API 1 +#define CONFIG_ESP_PHY_CALIBRATION_AND_DATA_STORAGE 1 +#define CONFIG_ESP_PHY_MAX_WIFI_TX_POWER 20 +#define CONFIG_ESP_PHY_MAX_TX_POWER 20 +#define CONFIG_ESP_PHY_RF_CAL_PARTIAL 1 +#define CONFIG_ESP_PHY_CALIBRATION_MODE 0 +#define CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ_120 1 +#define CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ 120 +#define CONFIG_ESP_SYSTEM_PANIC_PRINT_REBOOT 1 +#define CONFIG_ESP_SYSTEM_PANIC_REBOOT_DELAY_SECONDS 0 +#define CONFIG_ESP_SYSTEM_SINGLE_CORE_MODE 1 +#define CONFIG_ESP_SYSTEM_PMP_IDRAM_SPLIT 1 +#define CONFIG_ESP_SYSTEM_EVENT_QUEUE_SIZE 32 +#define CONFIG_ESP_SYSTEM_EVENT_TASK_STACK_SIZE 2304 +#define CONFIG_ESP_MAIN_TASK_STACK_SIZE 3584 +#define CONFIG_ESP_MAIN_TASK_AFFINITY_CPU0 1 +#define CONFIG_ESP_MAIN_TASK_AFFINITY 0x0 +#define CONFIG_ESP_MINIMAL_SHARED_STACK_SIZE 2048 +#define CONFIG_ESP_CONSOLE_UART_DEFAULT 1 +#define CONFIG_ESP_CONSOLE_UART 1 +#define CONFIG_ESP_CONSOLE_UART_NUM 0 +#define CONFIG_ESP_CONSOLE_UART_BAUDRATE 115200 +#define CONFIG_ESP_INT_WDT 1 +#define CONFIG_ESP_INT_WDT_TIMEOUT_MS 300 +#define CONFIG_ESP_TASK_WDT_EN 1 +#define CONFIG_ESP_TASK_WDT_USE_ESP_TIMER 1 +#define CONFIG_ESP_TASK_WDT_INIT 1 +#define CONFIG_ESP_TASK_WDT_TIMEOUT_S 5 +#define CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU0 1 +#define CONFIG_ESP_DEBUG_OCDAWARE 1 +#define CONFIG_ESP_SYSTEM_CHECK_INT_LEVEL_4 1 +#define CONFIG_ESP_BROWNOUT_DET 1 +#define CONFIG_ESP_BROWNOUT_DET_LVL_SEL_7 1 +#define CONFIG_ESP_BROWNOUT_DET_LVL 7 +#define CONFIG_ESP_SYSTEM_BROWNOUT_INTR 1 +#define CONFIG_ESP_IPC_TASK_STACK_SIZE 1024 +#define CONFIG_ESP_TIME_FUNCS_USE_RTC_TIMER 1 +#define CONFIG_ESP_TIME_FUNCS_USE_ESP_TIMER 1 +#define CONFIG_ESP_TIMER_TASK_STACK_SIZE 3584 +#define CONFIG_ESP_TIMER_INTERRUPT_LEVEL 1 +#define CONFIG_ESP_TIMER_TASK_AFFINITY 0x0 +#define CONFIG_ESP_TIMER_TASK_AFFINITY_CPU0 1 +#define CONFIG_ESP_TIMER_ISR_AFFINITY 0x1 +#define CONFIG_ESP_TIMER_ISR_AFFINITY_CPU0 1 +#define CONFIG_ESP_TIMER_SUPPORTS_ISR_DISPATCH_METHOD 1 +#define CONFIG_ESP_TIMER_IMPL_SYSTIMER 1 +#define CONFIG_ESP_WIFI_ENABLED 1 +#define CONFIG_ESP_WIFI_STATIC_RX_BUFFER_NUM 10 +#define CONFIG_ESP_WIFI_DYNAMIC_RX_BUFFER_NUM 32 +#define CONFIG_ESP_WIFI_DYNAMIC_TX_BUFFER 1 +#define CONFIG_ESP_WIFI_TX_BUFFER_TYPE 1 +#define CONFIG_ESP_WIFI_DYNAMIC_TX_BUFFER_NUM 32 +#define CONFIG_ESP_WIFI_STATIC_RX_MGMT_BUFFER 1 +#define CONFIG_ESP_WIFI_DYNAMIC_RX_MGMT_BUF 0 +#define CONFIG_ESP_WIFI_RX_MGMT_BUF_NUM_DEF 5 +#define CONFIG_ESP_WIFI_AMPDU_TX_ENABLED 1 +#define CONFIG_ESP_WIFI_TX_BA_WIN 6 +#define CONFIG_ESP_WIFI_AMPDU_RX_ENABLED 1 +#define CONFIG_ESP_WIFI_RX_BA_WIN 6 +#define CONFIG_ESP_WIFI_NVS_ENABLED 1 +#define CONFIG_ESP_WIFI_SOFTAP_BEACON_MAX_LEN 752 +#define CONFIG_ESP_WIFI_MGMT_SBUF_NUM 32 +#define CONFIG_ESP_WIFI_IRAM_OPT 1 +#define CONFIG_ESP_WIFI_RX_IRAM_OPT 1 +#define CONFIG_ESP_WIFI_ENABLE_WPA3_SAE 1 +#define CONFIG_ESP_WIFI_ENABLE_SAE_PK 1 +#define CONFIG_ESP_WIFI_SOFTAP_SAE_SUPPORT 1 +#define CONFIG_ESP_WIFI_STA_DISCONNECTED_PM_ENABLE 1 +#define CONFIG_ESP_WIFI_SOFTAP_SUPPORT 1 +#define CONFIG_ESP_WIFI_ESPNOW_MAX_ENCRYPT_NUM 2 +#define CONFIG_ESP_WIFI_MBEDTLS_CRYPTO 1 +#define CONFIG_ESP_WIFI_ENTERPRISE_SUPPORT 1 +#define CONFIG_ESP_COREDUMP_ENABLE_TO_NONE 1 +#define CONFIG_FATFS_VOLUME_COUNT 2 +#define CONFIG_FATFS_LFN_NONE 1 +#define CONFIG_FATFS_SECTOR_4096 1 +#define CONFIG_FATFS_CODEPAGE_437 1 +#define CONFIG_FATFS_CODEPAGE 437 +#define CONFIG_FATFS_FS_LOCK 0 +#define CONFIG_FATFS_TIMEOUT_MS 10000 +#define CONFIG_FATFS_PER_FILE_CACHE 1 +#define CONFIG_FATFS_VFS_FSTAT_BLKSIZE 0 +#define CONFIG_FREERTOS_UNICORE 1 +#define CONFIG_FREERTOS_HZ 100 +#define CONFIG_FREERTOS_OPTIMIZED_SCHEDULER 1 +#define CONFIG_FREERTOS_CHECK_STACKOVERFLOW_CANARY 1 +#define CONFIG_FREERTOS_THREAD_LOCAL_STORAGE_POINTERS 1 +#define CONFIG_FREERTOS_IDLE_TASK_STACKSIZE 1536 +#define CONFIG_FREERTOS_MAX_TASK_NAME_LEN 16 +#define CONFIG_FREERTOS_TIMER_TASK_PRIORITY 1 +#define CONFIG_FREERTOS_TIMER_TASK_STACK_DEPTH 2048 +#define CONFIG_FREERTOS_TIMER_QUEUE_LENGTH 10 +#define CONFIG_FREERTOS_QUEUE_REGISTRY_SIZE 0 +#define CONFIG_FREERTOS_TASK_NOTIFICATION_ARRAY_ENTRIES 1 +#define CONFIG_FREERTOS_TLSP_DELETION_CALLBACKS 1 +#define CONFIG_FREERTOS_CHECK_MUTEX_GIVEN_BY_OWNER 1 +#define CONFIG_FREERTOS_ISR_STACKSIZE 1536 +#define CONFIG_FREERTOS_INTERRUPT_BACKTRACE 1 +#define CONFIG_FREERTOS_TICK_SUPPORT_SYSTIMER 1 +#define CONFIG_FREERTOS_CORETIMER_SYSTIMER_LVL1 1 +#define CONFIG_FREERTOS_SYSTICK_USES_SYSTIMER 1 +#define CONFIG_FREERTOS_ENABLE_TASK_SNAPSHOT 1 +#define CONFIG_FREERTOS_NO_AFFINITY 0x7FFFFFFF +#define CONFIG_FREERTOS_SUPPORT_STATIC_ALLOCATION 1 +#define CONFIG_FREERTOS_DEBUG_OCDAWARE 1 +#define CONFIG_HAL_ASSERTION_EQUALS_SYSTEM 1 +#define CONFIG_HAL_DEFAULT_ASSERTION_LEVEL 2 +#define CONFIG_HAL_SYSTIMER_USE_ROM_IMPL 1 +#define CONFIG_HAL_WDT_USE_ROM_IMPL 1 +#define CONFIG_HAL_SPI_MASTER_FUNC_IN_IRAM 1 +#define CONFIG_HAL_SPI_SLAVE_FUNC_IN_IRAM 1 +#define CONFIG_HEAP_POISONING_DISABLED 1 +#define CONFIG_HEAP_TRACING_OFF 1 +#define CONFIG_HEAP_TLSF_USE_ROM_IMPL 1 +#define CONFIG_HEAP_TLSF_CHECK_PATCH 1 +#define CONFIG_LOG_DEFAULT_LEVEL_INFO 1 +#define CONFIG_LOG_DEFAULT_LEVEL 3 +#define CONFIG_LOG_MAXIMUM_EQUALS_DEFAULT 1 +#define CONFIG_LOG_MAXIMUM_LEVEL 3 +#define CONFIG_LOG_COLORS 1 +#define CONFIG_LOG_TIMESTAMP_SOURCE_RTOS 1 +#define CONFIG_LWIP_LOCAL_HOSTNAME "espressif" +#define CONFIG_LWIP_TCPIP_TASK_PRIO 18 +#define CONFIG_LWIP_DNS_SUPPORT_MDNS_QUERIES 1 +#define CONFIG_LWIP_TIMERS_ONDEMAND 1 +#define CONFIG_LWIP_ND6 1 +#define CONFIG_LWIP_MAX_SOCKETS 10 +#define CONFIG_LWIP_SO_REUSE 1 +#define CONFIG_LWIP_SO_REUSE_RXTOALL 1 +#define CONFIG_LWIP_IP4_FRAG 1 +#define CONFIG_LWIP_IP6_FRAG 1 +#define CONFIG_LWIP_IP_REASS_MAX_PBUFS 10 +#define CONFIG_LWIP_ESP_GRATUITOUS_ARP 1 +#define CONFIG_LWIP_GARP_TMR_INTERVAL 60 +#define CONFIG_LWIP_ESP_MLDV6_REPORT 1 +#define CONFIG_LWIP_MLDV6_TMR_INTERVAL 40 +#define CONFIG_LWIP_TCPIP_RECVMBOX_SIZE 32 +#define CONFIG_LWIP_DHCP_DOES_ARP_CHECK 1 +#define CONFIG_LWIP_DHCP_DISABLE_VENDOR_CLASS_ID 1 +#define CONFIG_LWIP_DHCP_OPTIONS_LEN 68 +#define CONFIG_LWIP_NUM_NETIF_CLIENT_DATA 0 +#define CONFIG_LWIP_DHCP_COARSE_TIMER_SECS 1 +#define CONFIG_LWIP_DHCPS 1 +#define CONFIG_LWIP_DHCPS_LEASE_UNIT 60 +#define CONFIG_LWIP_DHCPS_MAX_STATION_NUM 8 +#define CONFIG_LWIP_IPV4 1 +#define CONFIG_LWIP_IPV6 1 +#define CONFIG_LWIP_IPV6_NUM_ADDRESSES 3 +#define CONFIG_LWIP_NETIF_LOOPBACK 1 +#define CONFIG_LWIP_LOOPBACK_MAX_PBUFS 8 +#define CONFIG_LWIP_MAX_ACTIVE_TCP 16 +#define CONFIG_LWIP_MAX_LISTENING_TCP 16 +#define CONFIG_LWIP_TCP_HIGH_SPEED_RETRANSMISSION 1 +#define CONFIG_LWIP_TCP_MAXRTX 12 +#define CONFIG_LWIP_TCP_SYNMAXRTX 12 +#define CONFIG_LWIP_TCP_MSS 1440 +#define CONFIG_LWIP_TCP_TMR_INTERVAL 250 +#define CONFIG_LWIP_TCP_MSL 60000 +#define CONFIG_LWIP_TCP_FIN_WAIT_TIMEOUT 20000 +#define CONFIG_LWIP_TCP_SND_BUF_DEFAULT 5760 +#define CONFIG_LWIP_TCP_WND_DEFAULT 5760 +#define CONFIG_LWIP_TCP_RECVMBOX_SIZE 6 +#define CONFIG_LWIP_TCP_QUEUE_OOSEQ 1 +#define CONFIG_LWIP_TCP_OOSEQ_TIMEOUT 6 +#define CONFIG_LWIP_TCP_OOSEQ_MAX_PBUFS 4 +#define CONFIG_LWIP_TCP_OVERSIZE_MSS 1 +#define CONFIG_LWIP_TCP_RTO_TIME 1500 +#define CONFIG_LWIP_MAX_UDP_PCBS 16 +#define CONFIG_LWIP_UDP_RECVMBOX_SIZE 6 +#define CONFIG_LWIP_CHECKSUM_CHECK_ICMP 1 +#define CONFIG_LWIP_TCPIP_TASK_STACK_SIZE 3072 +#define CONFIG_LWIP_TCPIP_TASK_AFFINITY_NO_AFFINITY 1 +#define CONFIG_LWIP_TCPIP_TASK_AFFINITY 0x7FFFFFFF +#define CONFIG_LWIP_IPV6_MEMP_NUM_ND6_QUEUE 3 +#define CONFIG_LWIP_IPV6_ND6_NUM_NEIGHBORS 5 +#define CONFIG_LWIP_ICMP 1 +#define CONFIG_LWIP_MAX_RAW_PCBS 16 +#define CONFIG_LWIP_SNTP_MAX_SERVERS 1 +#define CONFIG_LWIP_SNTP_UPDATE_DELAY 3600000 +#define CONFIG_LWIP_BRIDGEIF_MAX_PORTS 7 +#define CONFIG_LWIP_ESP_LWIP_ASSERT 1 +#define CONFIG_LWIP_HOOK_TCP_ISN_DEFAULT 1 +#define CONFIG_LWIP_HOOK_IP6_ROUTE_NONE 1 +#define CONFIG_LWIP_HOOK_ND6_GET_GW_NONE 1 +#define CONFIG_LWIP_HOOK_IP6_SELECT_SRC_ADDR_NONE 1 +#define CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_NONE 1 +#define CONFIG_LWIP_HOOK_IP6_INPUT_NONE 1 +#define CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC 1 +#define CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN 1 +#define CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN 16384 +#define CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN 4096 +#define CONFIG_MBEDTLS_ECDH_LEGACY_CONTEXT 1 +#define CONFIG_MBEDTLS_SSL_KEEP_PEER_CERTIFICATE 1 +#define CONFIG_MBEDTLS_PKCS7_C 1 +#define CONFIG_MBEDTLS_CERTIFICATE_BUNDLE 1 +#define CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_FULL 1 +#define CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_MAX_CERTS 200 +#define CONFIG_MBEDTLS_ECP_RESTARTABLE 1 +#define CONFIG_MBEDTLS_CMAC_C 1 +#define CONFIG_MBEDTLS_HARDWARE_SHA 1 +#define CONFIG_MBEDTLS_HARDWARE_ECC 1 +#define CONFIG_MBEDTLS_ECC_OTHER_CURVES_SOFT_FALLBACK 1 +#define CONFIG_MBEDTLS_ROM_MD5 1 +#define CONFIG_MBEDTLS_HAVE_TIME 1 +#define CONFIG_MBEDTLS_ECDSA_DETERMINISTIC 1 +#define CONFIG_MBEDTLS_SHA512_C 1 +#define CONFIG_MBEDTLS_TLS_SERVER_AND_CLIENT 1 +#define CONFIG_MBEDTLS_TLS_SERVER 1 +#define CONFIG_MBEDTLS_TLS_CLIENT 1 +#define CONFIG_MBEDTLS_TLS_ENABLED 1 +#define CONFIG_MBEDTLS_KEY_EXCHANGE_RSA 1 +#define CONFIG_MBEDTLS_KEY_EXCHANGE_ELLIPTIC_CURVE 1 +#define CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_RSA 1 +#define CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA 1 +#define CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA 1 +#define CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_RSA 1 +#define CONFIG_MBEDTLS_SSL_RENEGOTIATION 1 +#define CONFIG_MBEDTLS_SSL_PROTO_TLS1_2 1 +#define CONFIG_MBEDTLS_SSL_ALPN 1 +#define CONFIG_MBEDTLS_CLIENT_SSL_SESSION_TICKETS 1 +#define CONFIG_MBEDTLS_SERVER_SSL_SESSION_TICKETS 1 +#define CONFIG_MBEDTLS_AES_C 1 +#define CONFIG_MBEDTLS_CCM_C 1 +#define CONFIG_MBEDTLS_GCM_C 1 +#define CONFIG_MBEDTLS_PEM_PARSE_C 1 +#define CONFIG_MBEDTLS_PEM_WRITE_C 1 +#define CONFIG_MBEDTLS_X509_CRL_PARSE_C 1 +#define CONFIG_MBEDTLS_X509_CSR_PARSE_C 1 +#define CONFIG_MBEDTLS_ECP_C 1 +#define CONFIG_MBEDTLS_ECDH_C 1 +#define CONFIG_MBEDTLS_ECDSA_C 1 +#define CONFIG_MBEDTLS_ECP_DP_SECP192R1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_SECP224R1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_SECP256R1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_SECP384R1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_SECP521R1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_SECP192K1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_SECP224K1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_SECP256K1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_BP256R1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_BP384R1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_BP512R1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_CURVE25519_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_NIST_OPTIM 1 +#define CONFIG_MBEDTLS_ECP_FIXED_POINT_OPTIM 1 +#define CONFIG_MQTT_PROTOCOL_311 1 +#define CONFIG_MQTT_TRANSPORT_SSL 1 +#define CONFIG_MQTT_TRANSPORT_WEBSOCKET 1 +#define CONFIG_MQTT_TRANSPORT_WEBSOCKET_SECURE 1 +#define CONFIG_NEWLIB_STDOUT_LINE_ENDING_CRLF 1 +#define CONFIG_NEWLIB_STDIN_LINE_ENDING_CR 1 +#define CONFIG_NEWLIB_NANO_FORMAT 1 +#define CONFIG_NEWLIB_TIME_SYSCALL_USE_RTC_HRT 1 +#define CONFIG_OPENTHREAD_NETWORK_NAME "OpenThread-ESP" +#define CONFIG_OPENTHREAD_MESH_LOCAL_PREFIX "fd00:db8:a0:0::/64" +#define CONFIG_OPENTHREAD_NETWORK_CHANNEL 15 +#define CONFIG_OPENTHREAD_NETWORK_PANID 0x1234 +#define CONFIG_OPENTHREAD_NETWORK_EXTPANID "dead00beef00cafe" +#define CONFIG_OPENTHREAD_NETWORK_MASTERKEY "00112233445566778899aabbccddeeff" +#define CONFIG_OPENTHREAD_NETWORK_PSKC "104810e2315100afd6bc9215a6bfac53" +#define CONFIG_OPENTHREAD_XTAL_ACCURACY 130 +#define CONFIG_ESP_PROTOCOMM_SUPPORT_SECURITY_VERSION_0 1 +#define CONFIG_ESP_PROTOCOMM_SUPPORT_SECURITY_VERSION_1 1 +#define CONFIG_ESP_PROTOCOMM_SUPPORT_SECURITY_VERSION_2 1 +#define CONFIG_PTHREAD_TASK_PRIO_DEFAULT 5 +#define CONFIG_PTHREAD_TASK_STACK_SIZE_DEFAULT 3072 +#define CONFIG_PTHREAD_TASK_CORE_DEFAULT -1 +#define CONFIG_PTHREAD_TASK_NAME_DEFAULT "pthread" +#define CONFIG_MMU_PAGE_SIZE_32KB 1 +#define CONFIG_MMU_PAGE_MODE "32KB" +#define CONFIG_MMU_PAGE_SIZE 0x8000 +#define CONFIG_SPI_FLASH_ROM_DRIVER_PATCH 1 +#define CONFIG_SPI_FLASH_DANGEROUS_WRITE_ABORTS 1 +#define CONFIG_SPI_FLASH_YIELD_DURING_ERASE 1 +#define CONFIG_SPI_FLASH_ERASE_YIELD_DURATION_MS 20 +#define CONFIG_SPI_FLASH_ERASE_YIELD_TICKS 1 +#define CONFIG_SPI_FLASH_WRITE_CHUNK_SIZE 8192 +#define CONFIG_SPI_FLASH_BROWNOUT_RESET_XMC 1 +#define CONFIG_SPI_FLASH_BROWNOUT_RESET 1 +#define CONFIG_SPI_FLASH_VENDOR_XMC_SUPPORTED 1 +#define CONFIG_SPI_FLASH_VENDOR_GD_SUPPORTED 1 +#define CONFIG_SPI_FLASH_VENDOR_ISSI_SUPPORTED 1 +#define CONFIG_SPI_FLASH_VENDOR_MXIC_SUPPORTED 1 +#define CONFIG_SPI_FLASH_VENDOR_WINBOND_SUPPORTED 1 +#define CONFIG_SPI_FLASH_VENDOR_BOYA_SUPPORTED 1 +#define CONFIG_SPI_FLASH_VENDOR_TH_SUPPORTED 1 +#define CONFIG_SPI_FLASH_SUPPORT_ISSI_CHIP 1 +#define CONFIG_SPI_FLASH_SUPPORT_MXIC_CHIP 1 +#define CONFIG_SPI_FLASH_SUPPORT_GD_CHIP 1 +#define CONFIG_SPI_FLASH_SUPPORT_WINBOND_CHIP 1 +#define CONFIG_SPI_FLASH_SUPPORT_BOYA_CHIP 1 +#define CONFIG_SPI_FLASH_SUPPORT_TH_CHIP 1 +#define CONFIG_SPI_FLASH_ENABLE_ENCRYPTED_READ_WRITE 1 +#define CONFIG_SPIFFS_MAX_PARTITIONS 3 +#define CONFIG_SPIFFS_CACHE 1 +#define CONFIG_SPIFFS_CACHE_WR 1 +#define CONFIG_SPIFFS_PAGE_CHECK 1 +#define CONFIG_SPIFFS_GC_MAX_RUNS 10 +#define CONFIG_SPIFFS_PAGE_SIZE 256 +#define CONFIG_SPIFFS_OBJ_NAME_LEN 32 +#define CONFIG_SPIFFS_USE_MAGIC 1 +#define CONFIG_SPIFFS_USE_MAGIC_LENGTH 1 +#define CONFIG_SPIFFS_META_LENGTH 4 +#define CONFIG_SPIFFS_USE_MTIME 1 +#define CONFIG_WS_TRANSPORT 1 +#define CONFIG_WS_BUFFER_SIZE 1024 +#define CONFIG_UNITY_ENABLE_FLOAT 1 +#define CONFIG_UNITY_ENABLE_DOUBLE 1 +#define CONFIG_UNITY_ENABLE_IDF_TEST_RUNNER 1 +#define CONFIG_VFS_SUPPORT_IO 1 +#define CONFIG_VFS_SUPPORT_DIR 1 +#define CONFIG_VFS_SUPPORT_SELECT 1 +#define CONFIG_VFS_SUPPRESS_SELECT_DEBUG_OUTPUT 1 +#define CONFIG_VFS_SUPPORT_TERMIOS 1 +#define CONFIG_VFS_MAX_COUNT 8 +#define CONFIG_VFS_SEMIHOSTFS_MAX_MOUNT_POINTS 1 +#define CONFIG_WL_SECTOR_SIZE_4096 1 +#define CONFIG_WL_SECTOR_SIZE 4096 +#define CONFIG_WIFI_PROV_SCAN_MAX_ENTRIES 16 +#define CONFIG_WIFI_PROV_AUTOSTOP_TIMEOUT 30 +#define CONFIG_WIFI_PROV_STA_ALL_CHANNEL_SCAN 1 + +/* List of deprecated options */ +#define CONFIG_A2D_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_A2D_TRACE_LEVEL +#define CONFIG_A2D_TRACE_LEVEL_WARNING CONFIG_BT_LOG_A2D_TRACE_LEVEL_WARNING +#define CONFIG_APPL_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_APPL_TRACE_LEVEL +#define CONFIG_APPL_TRACE_LEVEL_WARNING CONFIG_BT_LOG_APPL_TRACE_LEVEL_WARNING +#define CONFIG_AVCT_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_AVCT_TRACE_LEVEL +#define CONFIG_AVCT_TRACE_LEVEL_WARNING CONFIG_BT_LOG_AVCT_TRACE_LEVEL_WARNING +#define CONFIG_AVDT_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_AVDT_TRACE_LEVEL +#define CONFIG_AVDT_TRACE_LEVEL_WARNING CONFIG_BT_LOG_AVDT_TRACE_LEVEL_WARNING +#define CONFIG_AVRC_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_AVRC_TRACE_LEVEL +#define CONFIG_AVRC_TRACE_LEVEL_WARNING CONFIG_BT_LOG_AVRC_TRACE_LEVEL_WARNING +#define CONFIG_BLE_ESTABLISH_LINK_CONNECTION_TIMEOUT CONFIG_BT_BLE_ESTAB_LINK_CONN_TOUT +#define CONFIG_BLE_SMP_ENABLE CONFIG_BT_BLE_SMP_ENABLE +#define CONFIG_BLUEDROID_ENABLED CONFIG_BT_BLUEDROID_ENABLED +#define CONFIG_BLUEDROID_PINNED_TO_CORE CONFIG_BT_BLUEDROID_PINNED_TO_CORE +#define CONFIG_BLUFI_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_BLUFI_TRACE_LEVEL +#define CONFIG_BLUFI_TRACE_LEVEL_WARNING CONFIG_BT_LOG_BLUFI_TRACE_LEVEL_WARNING +#define CONFIG_BNEP_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_BNEP_TRACE_LEVEL +#define CONFIG_BROWNOUT_DET CONFIG_ESP_BROWNOUT_DET +#define CONFIG_BROWNOUT_DET_LVL CONFIG_ESP_BROWNOUT_DET_LVL +#define CONFIG_BROWNOUT_DET_LVL_SEL_7 CONFIG_ESP_BROWNOUT_DET_LVL_SEL_7 +#define CONFIG_BTC_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_BTC_TRACE_LEVEL +#define CONFIG_BTC_TASK_STACK_SIZE CONFIG_BT_BTC_TASK_STACK_SIZE +#define CONFIG_BTC_TRACE_LEVEL_WARNING CONFIG_BT_LOG_BTC_TRACE_LEVEL_WARNING +#define CONFIG_BTH_LOG_SDP_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_SDP_TRACE_LEVEL +#define CONFIG_BTIF_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_BTIF_TRACE_LEVEL +#define CONFIG_BTIF_TRACE_LEVEL_WARNING CONFIG_BT_LOG_BTIF_TRACE_LEVEL_WARNING +#define CONFIG_BTM_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_BTM_TRACE_LEVEL +#define CONFIG_BTM_TRACE_LEVEL_WARNING CONFIG_BT_LOG_BTM_TRACE_LEVEL_WARNING +#define CONFIG_BTU_TASK_STACK_SIZE CONFIG_BT_BTU_TASK_STACK_SIZE +#define CONFIG_BT_NIMBLE_COEX_PHY_CODED_TX_RX_TLIM_DIS CONFIG_BT_LE_COEX_PHY_CODED_TX_RX_TLIM_DIS +#define CONFIG_COMPILER_OPTIMIZATION_LEVEL_RELEASE CONFIG_COMPILER_OPTIMIZATION_SIZE +#define CONFIG_CONSOLE_UART CONFIG_ESP_CONSOLE_UART +#define CONFIG_CONSOLE_UART_BAUDRATE CONFIG_ESP_CONSOLE_UART_BAUDRATE +#define CONFIG_CONSOLE_UART_DEFAULT CONFIG_ESP_CONSOLE_UART_DEFAULT +#define CONFIG_CONSOLE_UART_NUM CONFIG_ESP_CONSOLE_UART_NUM +#define CONFIG_ESP32_APPTRACE_DEST_NONE CONFIG_APPTRACE_DEST_NONE +#define CONFIG_ESP32_APPTRACE_LOCK_ENABLE CONFIG_APPTRACE_LOCK_ENABLE +#define CONFIG_ESP32_ENABLE_COREDUMP_TO_NONE CONFIG_ESP_COREDUMP_ENABLE_TO_NONE +#define CONFIG_ESP32_PHY_CALIBRATION_AND_DATA_STORAGE CONFIG_ESP_PHY_CALIBRATION_AND_DATA_STORAGE +#define CONFIG_ESP32_PHY_MAX_TX_POWER CONFIG_ESP_PHY_MAX_TX_POWER +#define CONFIG_ESP32_PHY_MAX_WIFI_TX_POWER CONFIG_ESP_PHY_MAX_WIFI_TX_POWER +#define CONFIG_ESP32_PTHREAD_TASK_CORE_DEFAULT CONFIG_PTHREAD_TASK_CORE_DEFAULT +#define CONFIG_ESP32_PTHREAD_TASK_NAME_DEFAULT CONFIG_PTHREAD_TASK_NAME_DEFAULT +#define CONFIG_ESP32_PTHREAD_TASK_PRIO_DEFAULT CONFIG_PTHREAD_TASK_PRIO_DEFAULT +#define CONFIG_ESP32_PTHREAD_TASK_STACK_SIZE_DEFAULT CONFIG_PTHREAD_TASK_STACK_SIZE_DEFAULT +#define CONFIG_ESP32_WIFI_AMPDU_RX_ENABLED CONFIG_ESP_WIFI_AMPDU_RX_ENABLED +#define CONFIG_ESP32_WIFI_AMPDU_TX_ENABLED CONFIG_ESP_WIFI_AMPDU_TX_ENABLED +#define CONFIG_ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM CONFIG_ESP_WIFI_DYNAMIC_RX_BUFFER_NUM +#define CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER CONFIG_ESP_WIFI_DYNAMIC_TX_BUFFER +#define CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER_NUM CONFIG_ESP_WIFI_DYNAMIC_TX_BUFFER_NUM +#define CONFIG_ESP32_WIFI_ENABLED CONFIG_ESP_WIFI_ENABLED +#define CONFIG_ESP32_WIFI_ENABLE_WPA3_SAE CONFIG_ESP_WIFI_ENABLE_WPA3_SAE +#define CONFIG_ESP32_WIFI_IRAM_OPT CONFIG_ESP_WIFI_IRAM_OPT +#define CONFIG_ESP32_WIFI_MGMT_SBUF_NUM CONFIG_ESP_WIFI_MGMT_SBUF_NUM +#define CONFIG_ESP32_WIFI_NVS_ENABLED CONFIG_ESP_WIFI_NVS_ENABLED +#define CONFIG_ESP32_WIFI_RX_BA_WIN CONFIG_ESP_WIFI_RX_BA_WIN +#define CONFIG_ESP32_WIFI_RX_IRAM_OPT CONFIG_ESP_WIFI_RX_IRAM_OPT +#define CONFIG_ESP32_WIFI_SOFTAP_BEACON_MAX_LEN CONFIG_ESP_WIFI_SOFTAP_BEACON_MAX_LEN +#define CONFIG_ESP32_WIFI_STATIC_RX_BUFFER_NUM CONFIG_ESP_WIFI_STATIC_RX_BUFFER_NUM +#define CONFIG_ESP32_WIFI_SW_COEXIST_ENABLE CONFIG_ESP_COEX_SW_COEXIST_ENABLE +#define CONFIG_ESP32_WIFI_TX_BA_WIN CONFIG_ESP_WIFI_TX_BA_WIN +#define CONFIG_ESP32_WIFI_TX_BUFFER_TYPE CONFIG_ESP_WIFI_TX_BUFFER_TYPE +#define CONFIG_ESP_GRATUITOUS_ARP CONFIG_LWIP_ESP_GRATUITOUS_ARP +#define CONFIG_ESP_TASK_WDT CONFIG_ESP_TASK_WDT_INIT +#define CONFIG_ESP_WIFI_SW_COEXIST_ENABLE CONFIG_ESP_COEX_SW_COEXIST_ENABLE +#define CONFIG_FLASHMODE_DIO CONFIG_ESPTOOLPY_FLASHMODE_DIO +#define CONFIG_GAP_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_GAP_TRACE_LEVEL +#define CONFIG_GAP_TRACE_LEVEL_WARNING CONFIG_BT_LOG_GAP_TRACE_LEVEL_WARNING +#define CONFIG_GARP_TMR_INTERVAL CONFIG_LWIP_GARP_TMR_INTERVAL +#define CONFIG_GATTC_ENABLE CONFIG_BT_GATTC_ENABLE +#define CONFIG_GATTS_ENABLE CONFIG_BT_GATTS_ENABLE +#define CONFIG_GATTS_SEND_SERVICE_CHANGE_AUTO CONFIG_BT_GATTS_SEND_SERVICE_CHANGE_AUTO +#define CONFIG_GATTS_SEND_SERVICE_CHANGE_MODE CONFIG_BT_GATTS_SEND_SERVICE_CHANGE_MODE +#define CONFIG_GATT_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_GATT_TRACE_LEVEL +#define CONFIG_GATT_TRACE_LEVEL_WARNING CONFIG_BT_LOG_GATT_TRACE_LEVEL_WARNING +#define CONFIG_HCI_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_HCI_TRACE_LEVEL +#define CONFIG_HCI_TRACE_LEVEL_WARNING CONFIG_BT_LOG_HCI_TRACE_LEVEL_WARNING +#define CONFIG_HID_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_HID_TRACE_LEVEL +#define CONFIG_HID_TRACE_LEVEL_WARNING CONFIG_BT_LOG_HID_TRACE_LEVEL_WARNING +#define CONFIG_INT_WDT CONFIG_ESP_INT_WDT +#define CONFIG_INT_WDT_TIMEOUT_MS CONFIG_ESP_INT_WDT_TIMEOUT_MS +#define CONFIG_IPC_TASK_STACK_SIZE CONFIG_ESP_IPC_TASK_STACK_SIZE +#define CONFIG_L2CAP_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_L2CAP_TRACE_LEVEL +#define CONFIG_L2CAP_TRACE_LEVEL_WARNING CONFIG_BT_LOG_L2CAP_TRACE_LEVEL_WARNING +#define CONFIG_LOG_BOOTLOADER_LEVEL CONFIG_BOOTLOADER_LOG_LEVEL +#define CONFIG_LOG_BOOTLOADER_LEVEL_INFO CONFIG_BOOTLOADER_LOG_LEVEL_INFO +#define CONFIG_MAIN_TASK_STACK_SIZE CONFIG_ESP_MAIN_TASK_STACK_SIZE +#define CONFIG_MCA_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_MCA_TRACE_LEVEL +#define CONFIG_MCA_TRACE_LEVEL_WARNING CONFIG_BT_LOG_MCA_TRACE_LEVEL_WARNING +#define CONFIG_MONITOR_BAUD CONFIG_ESPTOOLPY_MONITOR_BAUD +#define CONFIG_OPTIMIZATION_ASSERTIONS_ENABLED CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_ENABLE +#define CONFIG_OPTIMIZATION_ASSERTION_LEVEL CONFIG_COMPILER_OPTIMIZATION_ASSERTION_LEVEL +#define CONFIG_OPTIMIZATION_LEVEL_RELEASE CONFIG_COMPILER_OPTIMIZATION_SIZE +#define CONFIG_OSI_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_OSI_TRACE_LEVEL +#define CONFIG_OSI_TRACE_LEVEL_WARNING CONFIG_BT_LOG_OSI_TRACE_LEVEL_WARNING +#define CONFIG_PAN_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_PAN_TRACE_LEVEL +#define CONFIG_PAN_TRACE_LEVEL_WARNING CONFIG_BT_LOG_PAN_TRACE_LEVEL_WARNING +#define CONFIG_POST_EVENTS_FROM_IRAM_ISR CONFIG_ESP_EVENT_POST_FROM_IRAM_ISR +#define CONFIG_POST_EVENTS_FROM_ISR CONFIG_ESP_EVENT_POST_FROM_ISR +#define CONFIG_RFCOMM_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_RFCOMM_TRACE_LEVEL +#define CONFIG_RFCOMM_TRACE_LEVEL_WARNING CONFIG_BT_LOG_RFCOMM_TRACE_LEVEL_WARNING +#define CONFIG_SDP_TRACE_LEVEL_WARNING CONFIG_BT_LOG_SDP_TRACE_LEVEL_WARNING +#define CONFIG_SEMIHOSTFS_MAX_MOUNT_POINTS CONFIG_VFS_SEMIHOSTFS_MAX_MOUNT_POINTS +#define CONFIG_SMP_ENABLE CONFIG_BT_SMP_ENABLE +#define CONFIG_SMP_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_SMP_TRACE_LEVEL +#define CONFIG_SMP_TRACE_LEVEL_WARNING CONFIG_BT_LOG_SMP_TRACE_LEVEL_WARNING +#define CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ABORTS CONFIG_SPI_FLASH_DANGEROUS_WRITE_ABORTS +#define CONFIG_STACK_CHECK_NONE CONFIG_COMPILER_STACK_CHECK_MODE_NONE +#define CONFIG_SUPPORT_TERMIOS CONFIG_VFS_SUPPORT_TERMIOS +#define CONFIG_SUPPRESS_SELECT_DEBUG_OUTPUT CONFIG_VFS_SUPPRESS_SELECT_DEBUG_OUTPUT +#define CONFIG_SW_COEXIST_ENABLE CONFIG_ESP_COEX_SW_COEXIST_ENABLE +#define CONFIG_SYSTEM_EVENT_QUEUE_SIZE CONFIG_ESP_SYSTEM_EVENT_QUEUE_SIZE +#define CONFIG_SYSTEM_EVENT_TASK_STACK_SIZE CONFIG_ESP_SYSTEM_EVENT_TASK_STACK_SIZE +#define CONFIG_TASK_WDT CONFIG_ESP_TASK_WDT_INIT +#define CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU0 CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU0 +#define CONFIG_TASK_WDT_TIMEOUT_S CONFIG_ESP_TASK_WDT_TIMEOUT_S +#define CONFIG_TCPIP_RECVMBOX_SIZE CONFIG_LWIP_TCPIP_RECVMBOX_SIZE +#define CONFIG_TCPIP_TASK_AFFINITY CONFIG_LWIP_TCPIP_TASK_AFFINITY +#define CONFIG_TCPIP_TASK_AFFINITY_NO_AFFINITY CONFIG_LWIP_TCPIP_TASK_AFFINITY_NO_AFFINITY +#define CONFIG_TCPIP_TASK_STACK_SIZE CONFIG_LWIP_TCPIP_TASK_STACK_SIZE +#define CONFIG_TCP_MAXRTX CONFIG_LWIP_TCP_MAXRTX +#define CONFIG_TCP_MSL CONFIG_LWIP_TCP_MSL +#define CONFIG_TCP_MSS CONFIG_LWIP_TCP_MSS +#define CONFIG_TCP_OVERSIZE_MSS CONFIG_LWIP_TCP_OVERSIZE_MSS +#define CONFIG_TCP_QUEUE_OOSEQ CONFIG_LWIP_TCP_QUEUE_OOSEQ +#define CONFIG_TCP_RECVMBOX_SIZE CONFIG_LWIP_TCP_RECVMBOX_SIZE +#define CONFIG_TCP_SND_BUF_DEFAULT CONFIG_LWIP_TCP_SND_BUF_DEFAULT +#define CONFIG_TCP_SYNMAXRTX CONFIG_LWIP_TCP_SYNMAXRTX +#define CONFIG_TCP_WND_DEFAULT CONFIG_LWIP_TCP_WND_DEFAULT +#define CONFIG_TIMER_QUEUE_LENGTH CONFIG_FREERTOS_TIMER_QUEUE_LENGTH +#define CONFIG_TIMER_TASK_PRIORITY CONFIG_FREERTOS_TIMER_TASK_PRIORITY +#define CONFIG_TIMER_TASK_STACK_DEPTH CONFIG_FREERTOS_TIMER_TASK_STACK_DEPTH +#define CONFIG_TIMER_TASK_STACK_SIZE CONFIG_ESP_TIMER_TASK_STACK_SIZE +#define CONFIG_UDP_RECVMBOX_SIZE CONFIG_LWIP_UDP_RECVMBOX_SIZE +#define CONFIG_WPA_MBEDTLS_CRYPTO CONFIG_ESP_WIFI_MBEDTLS_CRYPTO diff --git a/espradio/blobs/headers/esp32c3/esp_bt.h b/espradio/blobs/headers/esp32c3/esp_bt.h new file mode 100644 index 000000000..6d102e309 --- /dev/null +++ b/espradio/blobs/headers/esp32c3/esp_bt.h @@ -0,0 +1,598 @@ +/* + * SPDX-FileCopyrightText: 2015-2023 Espressif Systems (Shanghai) CO LTD + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#ifndef __ESP_BT_H__ +#define __ESP_BT_H__ + +#include +#include +#include "esp_err.h" +#include "sdkconfig.h" +#include "esp_assert.h" + +#ifdef __cplusplus +extern "C" { +#endif + +#define ESP_BT_CTRL_CONFIG_MAGIC_VAL 0x5A5AA5A5 +#define ESP_BT_CTRL_CONFIG_VERSION 0x02307120 + +#define ESP_BT_HCI_TL_MAGIC_VALUE 0xfadebead +#define ESP_BT_HCI_TL_VERSION 0x00010000 + +/** + * @brief Bluetooth mode for controller enable/disable + */ +typedef enum { + ESP_BT_MODE_IDLE = 0x00, /*!< Bluetooth is not running */ + ESP_BT_MODE_BLE = 0x01, /*!< Run BLE mode */ + ESP_BT_MODE_CLASSIC_BT = 0x02, /*!< Run Classic BT mode */ + ESP_BT_MODE_BTDM = 0x03, /*!< Run dual mode */ +} esp_bt_mode_t; + +/** + * @brief Type of controller HCI transport layer + */ +typedef enum { + ESP_BT_CTRL_HCI_TL_UART = 0, /*!< HCI UART h4 transport layer */ + ESP_BT_CTRL_HCI_TL_VHCI = 1, /*!< VHCI interface */ +} esp_bt_ctrl_hci_tl_t; + +/** + * @brief type of BLE connection event length computation + */ +typedef enum { + ESP_BLE_CE_LEN_TYPE_ORIG = 0, /*!< original */ + ESP_BLE_CE_LEN_TYPE_CE = 1, /*!< use CE_LEN parameter from HCI commands */ + ESP_BLE_CE_LEN_TYPE_SD = 1, /*!< Espressif vendor defined */ +} esp_ble_ce_len_t; + +/** + * @brief Bluetooth sleep mode + */ +typedef enum { + ESP_BT_SLEEP_MODE_NONE = 0, /*!< Bluetooth sleep mode disabled */ + ESP_BT_SLEEP_MODE_1 = 1, /*!< Bluetooth sleep mode 1 */ +} esp_bt_sleep_mode_t; + +/** + * @brief Bluetooth sleep clock + */ +typedef enum { + ESP_BT_SLEEP_CLOCK_NONE = 0, /*!< Sleep clock not configured */ + ESP_BT_SLEEP_CLOCK_MAIN_XTAL = 1, /*!< SoC main crystal */ + ESP_BT_SLEEP_CLOCK_EXT_32K_XTAL = 2, /*!< External 32.768kHz crystal */ + ESP_BT_SLEEP_CLOCK_RTC_SLOW = 3, /*!< Internal 136kHz RC oscillator */ + ESP_BT_SLEEP_CLOCK_FPGA_32K = 4, /*!< Hardwired 32KHz clock temporarily used for FPGA */ +} esp_bt_sleep_clock_t; + +/** + * @brief antenna index used for bluetooth + */ +enum { + ESP_BT_ANT_IDX_0 = 0, /*!< anntena NO 0 */ + ESP_BT_ANT_IDX_1 = 1, /*!< anntena NO 1 */ +}; + +/** + * @brief Maximum Tx/Rx time limit on Coded-PHY connection + */ +enum { + ESP_BT_COEX_PHY_CODED_TX_RX_TIME_LIMIT_FORCE_DISABLE = 0, /*!< Disable the limit */ + ESP_BT_COEX_PHY_CODED_TX_RX_TIME_LIMIT_FORCE_ENABLE, /*!< Always Enable the limit */ +}; + +#define ESP_BT_HCI_TL_STATUS_OK (0) /*!< HCI_TL Tx/Rx operation status OK */ + +/** + * @brief callback function for HCI Transport Layer send/receive operations + */ +typedef void (* esp_bt_hci_tl_callback_t) (void *arg, uint8_t status); + +#ifdef CONFIG_BT_ENABLED + +#define BT_CTRL_BLE_MAX_ACT_LIMIT 10 //Maximum BLE activity limitation +#define SLAVE_CE_LEN_MIN_DEFAULT 5 + +#ifdef CONFIG_BT_CTRL_SCAN_DUPL_TYPE +#define SCAN_DUPLICATE_TYPE_VALUE CONFIG_BT_CTRL_SCAN_DUPL_TYPE +#else +#define SCAN_DUPLICATE_TYPE_VALUE 0 +#endif + +/* normal adv cache size */ +#ifdef CONFIG_BT_CTRL_SCAN_DUPL_CACHE_SIZE +#define NORMAL_SCAN_DUPLICATE_CACHE_SIZE CONFIG_BT_CTRL_SCAN_DUPL_CACHE_SIZE +#else +#define NORMAL_SCAN_DUPLICATE_CACHE_SIZE 20 +#endif + +#ifndef CONFIG_BT_CTRL_BLE_MESH_SCAN_DUPL_EN +#define CONFIG_BT_CTRL_BLE_MESH_SCAN_DUPL_EN FALSE +#endif + +#define SCAN_DUPLICATE_MODE_NORMAL_ADV_ONLY 0 +#define SCAN_DUPLICATE_MODE_NORMAL_ADV_MESH_ADV 1 + +#if CONFIG_BT_CTRL_BLE_MESH_SCAN_DUPL_EN + #define SCAN_DUPLICATE_MODE SCAN_DUPLICATE_MODE_NORMAL_ADV_MESH_ADV + #ifdef CONFIG_BT_CTRL_MESH_DUPL_SCAN_CACHE_SIZE + #define MESH_DUPLICATE_SCAN_CACHE_SIZE CONFIG_BT_CTRL_MESH_DUPL_SCAN_CACHE_SIZE + #else + #define MESH_DUPLICATE_SCAN_CACHE_SIZE 50 + #endif +#else + #define SCAN_DUPLICATE_MODE SCAN_DUPLICATE_MODE_NORMAL_ADV_ONLY + #define MESH_DUPLICATE_SCAN_CACHE_SIZE 0 +#endif + +#ifndef CONFIG_BT_CTRL_DUPL_SCAN_CACHE_REFRESH_PERIOD +#define DUPL_SCAN_CACHE_REFRESH_PERIOD 0 +#else +#define DUPL_SCAN_CACHE_REFRESH_PERIOD CONFIG_BT_CTRL_DUPL_SCAN_CACHE_REFRESH_PERIOD +#endif + +#ifdef CONFIG_BT_CTRL_SCAN_BACKOFF_UPPERLIMITMAX +#define BT_CTRL_SCAN_BACKOFF_UPPERLIMITMAX CONFIG_BT_CTRL_SCAN_BACKOFF_UPPERLIMITMAX +#else +#define BT_CTRL_SCAN_BACKOFF_UPPERLIMITMAX 0 +#endif + +#ifdef CONFIG_BT_CTRL_AGC_RECORRECT_EN +#define BT_CTRL_AGC_RECORRECT_EN CONFIG_BT_CTRL_AGC_RECORRECT_EN +// ESP32-S3 +#if CONFIG_IDF_TARGET_ESP32S3 +#define BT_CTRL_AGC_RECORRECT_NEW 1 +#else +//Check if chip target is ESP32-C3 101 +#if CONFIG_ESP32C3_REV_MIN_101 +#define BT_CTRL_AGC_RECORRECT_NEW 1 +#else +#define BT_CTRL_AGC_RECORRECT_NEW 0 +#endif // CONFIG_ESP32C3_REV_MIN_101 +#endif // CONFIG_IDF_TARGET_ESP32S3 + +#else +#define BT_CTRL_AGC_RECORRECT_EN 0 +#define BT_CTRL_AGC_RECORRECT_NEW 0 +#endif + +#ifdef CONFIG_BT_CTRL_CODED_AGC_RECORRECT_EN +#define BT_CTRL_CODED_AGC_RECORRECT CONFIG_BT_CTRL_CODED_AGC_RECORRECT_EN +#else +#define BT_CTRL_CODED_AGC_RECORRECT 0 +#endif + +#if defined (CONFIG_BT_BLE_50_FEATURES_SUPPORTED) || defined (CONFIG_BT_NIMBLE_50_FEATURE_SUPPORT) +#ifdef CONFIG_BT_BLE_50_FEATURES_SUPPORTED +#define BT_CTRL_50_FEATURE_SUPPORT (CONFIG_BT_BLE_50_FEATURES_SUPPORTED) +#endif // CONFIG_BT_BLE_50_FEATURES_SUPPORTED +#ifdef CONFIG_BT_NIMBLE_50_FEATURE_SUPPORT +#define BT_CTRL_50_FEATURE_SUPPORT (CONFIG_BT_NIMBLE_50_FEATURE_SUPPORT) +#endif // CONFIG_BT_NIMBLE_50_FEATURE_SUPPORT +#else +#if defined (CONFIG_BT_BLUEDROID_ENABLED) || defined (CONFIG_BT_NIMBLE_ENABLED) +#define BT_CTRL_50_FEATURE_SUPPORT (0) +#else +#define BT_CTRL_50_FEATURE_SUPPORT (1) +#endif // (CONFIG_BT_BLUEDROID_ENABLED) || (CONFIG_BT_NIMBLE_ENABLED) +#endif // (CONFIG_BT_BLE_50_FEATURES_SUPPORTED) || (CONFIG_BT_NIMBLE_50_FEATURE_SUPPORT) + +#if defined(CONFIG_BT_BLE_CCA_MODE) +#define BT_BLE_CCA_MODE (CONFIG_BT_BLE_CCA_MODE) +#else +#define BT_BLE_CCA_MODE (0) +#endif + +#define AGC_RECORRECT_EN ((BT_CTRL_AGC_RECORRECT_EN << 0) | (BT_CTRL_CODED_AGC_RECORRECT <<1) | (BT_CTRL_AGC_RECORRECT_NEW << 2)) + +#define CFG_MASK_BIT_SCAN_DUPLICATE_OPTION (1<<0) + +#define CFG_MASK CFG_MASK_BIT_SCAN_DUPLICATE_OPTION +#if CONFIG_IDF_TARGET_ESP32C3 +#define BLE_HW_TARGET_CODE_CHIP_ECO0 (0x01010000) +#else // CONFIG_IDF_TARGET_ESP32S3 +#define BLE_HW_TARGET_CODE_CHIP_ECO0 (0x02010000) +#endif + +#define BT_CONTROLLER_INIT_CONFIG_DEFAULT() { \ + .magic = ESP_BT_CTRL_CONFIG_MAGIC_VAL, \ + .version = ESP_BT_CTRL_CONFIG_VERSION, \ + .controller_task_stack_size = ESP_TASK_BT_CONTROLLER_STACK, \ + .controller_task_prio = ESP_TASK_BT_CONTROLLER_PRIO, \ + .controller_task_run_cpu = CONFIG_BT_CTRL_PINNED_TO_CORE, \ + .bluetooth_mode = CONFIG_BT_CTRL_MODE_EFF, \ + .ble_max_act = CONFIG_BT_CTRL_BLE_MAX_ACT_EFF, \ + .sleep_mode = CONFIG_BT_CTRL_SLEEP_MODE_EFF, \ + .sleep_clock = CONFIG_BT_CTRL_SLEEP_CLOCK_EFF, \ + .ble_st_acl_tx_buf_nb = CONFIG_BT_CTRL_BLE_STATIC_ACL_TX_BUF_NB, \ + .ble_hw_cca_check = CONFIG_BT_CTRL_HW_CCA_EFF, \ + .ble_adv_dup_filt_max = CONFIG_BT_CTRL_ADV_DUP_FILT_MAX, \ + .coex_param_en = false, \ + .ce_len_type = CONFIG_BT_CTRL_CE_LENGTH_TYPE_EFF, \ + .coex_use_hooks = false, \ + .hci_tl_type = CONFIG_BT_CTRL_HCI_TL_EFF, \ + .hci_tl_funcs = NULL, \ + .txant_dft = CONFIG_BT_CTRL_TX_ANTENNA_INDEX_EFF, \ + .rxant_dft = CONFIG_BT_CTRL_RX_ANTENNA_INDEX_EFF, \ + .txpwr_dft = CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_EFF, \ + .cfg_mask = CFG_MASK, \ + .scan_duplicate_mode = SCAN_DUPLICATE_MODE, \ + .scan_duplicate_type = SCAN_DUPLICATE_TYPE_VALUE, \ + .normal_adv_size = NORMAL_SCAN_DUPLICATE_CACHE_SIZE, \ + .mesh_adv_size = MESH_DUPLICATE_SCAN_CACHE_SIZE, \ + .coex_phy_coded_tx_rx_time_limit = CONFIG_BT_CTRL_COEX_PHY_CODED_TX_RX_TLIM_EFF, \ + .hw_target_code = BLE_HW_TARGET_CODE_CHIP_ECO0, \ + .slave_ce_len_min = SLAVE_CE_LEN_MIN_DEFAULT, \ + .hw_recorrect_en = AGC_RECORRECT_EN, \ + .cca_thresh = CONFIG_BT_CTRL_HW_CCA_VAL, \ + .scan_backoff_upperlimitmax = BT_CTRL_SCAN_BACKOFF_UPPERLIMITMAX, \ + .dup_list_refresh_period = DUPL_SCAN_CACHE_REFRESH_PERIOD, \ + .ble_50_feat_supp = BT_CTRL_50_FEATURE_SUPPORT, \ + .ble_cca_mode = BT_BLE_CCA_MODE, \ +} + +#else +#define BT_CONTROLLER_INIT_CONFIG_DEFAULT() {0}; ESP_STATIC_ASSERT(0, "please enable bluetooth in menuconfig to use esp_bt.h"); +#endif + +/** + * @brief Controller HCI transport layer function structure + * This structure shall be registered when HCI transport layer is UART + */ +typedef struct { + uint32_t _magic; /*!< Magic number */ + uint32_t _version; /*!< Version number of the defined structure */ + uint32_t _reserved; /*!< Reserved for future use */ + int (* _open)(void); /*!< HCI transport layer open function */ + void (* _close)(void); /*!< HCI transport layer close function */ + void (* _finish_transfers)(void); /*!< HCI transport layer finish transfers function */ + void (* _recv)(uint8_t *buf, uint32_t len, esp_bt_hci_tl_callback_t callback, void* arg); /*!< HCI transport layer receive function */ + void (* _send)(uint8_t *buf, uint32_t len, esp_bt_hci_tl_callback_t callback, void* arg); /*!< HCI transport layer send function */ + bool (* _flow_off)(void); /*!< HCI transport layer flow off function */ + void (* _flow_on)(void); /*!< HCI transport layer flow on function */ +} esp_bt_hci_tl_t; + +/** + * @brief Controller config options, depend on config mask. + * Config mask indicate which functions enabled, this means + * some options or parameters of some functions enabled by config mask. + */ +typedef struct { + /* + * Following parameters can not be configured runtime when call esp_bt_controller_init() + * They will be overwritten by constant values from menuconfig options or from macros. + * So, do not modify the value when esp_bt_controller_init() + */ + uint32_t magic; /*!< Magic number */ + uint32_t version; /*!< version number of the defined structure */ + /* + * Following parameters can be configured runtime, when call esp_bt_controller_init() + */ + uint16_t controller_task_stack_size; /*!< Bluetooth controller task stack size */ + uint8_t controller_task_prio; /*!< Bluetooth controller task priority */ + uint8_t controller_task_run_cpu; /*!< CPU num that Bluetooth controller task runs on */ + uint8_t bluetooth_mode; /*!< Controller mode: BR/EDR, BLE or Dual Mode */ + uint8_t ble_max_act; /*!< BLE maximum number of air activities */ + uint8_t sleep_mode; /*!< controller sleep mode */ + uint8_t sleep_clock; /*!< controller sleep clock */ + uint8_t ble_st_acl_tx_buf_nb; /*!< controller static ACL TX BUFFER number */ + uint8_t ble_hw_cca_check; /*!< controller hardware triggered CCA check */ + uint16_t ble_adv_dup_filt_max; /*!< maxinum number of duplicate scan filter */ + bool coex_param_en; /*!< deprecated */ + uint8_t ce_len_type; /*!< connection event length computation method */ + bool coex_use_hooks; /*!< deprecated */ + uint8_t hci_tl_type; /*!< HCI transport layer, UART, VHCI, etc */ + esp_bt_hci_tl_t *hci_tl_funcs; /*!< hci transport functions used, must be set when hci_tl_type is UART */ + uint8_t txant_dft; /*!< default Tx antenna */ + uint8_t rxant_dft; /*!< default Rx antenna */ + uint8_t txpwr_dft; /*!< default Tx power */ + uint32_t cfg_mask; /*!< Configuration mask to set specific options */ + uint8_t scan_duplicate_mode; /*!< scan duplicate mode */ + uint8_t scan_duplicate_type; /*!< scan duplicate type */ + uint16_t normal_adv_size; /*!< Normal adv size for scan duplicate */ + uint16_t mesh_adv_size; /*!< Mesh adv size for scan duplicate */ + uint8_t coex_phy_coded_tx_rx_time_limit; /*!< limit on max tx/rx time in case of connection using CODED-PHY with Wi-Fi coexistence */ + uint32_t hw_target_code; /*!< hardware target */ + uint8_t slave_ce_len_min; /*!< slave minimum ce length*/ + uint8_t hw_recorrect_en; /*!< Hardware re-correction enabled */ + uint8_t cca_thresh; /*!< cca threshold*/ + uint16_t scan_backoff_upperlimitmax; /*!< scan backoff upperlimitmax value */ + uint16_t dup_list_refresh_period; /*!< duplicate scan list refresh time */ + bool ble_50_feat_supp; /*!< BLE 5.0 feature support */ + uint8_t ble_cca_mode; /*!< BLE CCA mode */ +} esp_bt_controller_config_t; + +/** + * @brief Bluetooth controller enable/disable/initialised/de-initialised status + */ +typedef enum { + ESP_BT_CONTROLLER_STATUS_IDLE = 0, + ESP_BT_CONTROLLER_STATUS_INITED, + ESP_BT_CONTROLLER_STATUS_ENABLED, + ESP_BT_CONTROLLER_STATUS_NUM, +} esp_bt_controller_status_t; + +/** + * @brief BLE tx power type + * ESP_BLE_PWR_TYPE_CONN_HDL0-8: for each connection, and only be set after connection completed. + * when disconnect, the correspond TX power is not effected. + * ESP_BLE_PWR_TYPE_ADV : for advertising/scan response. + * ESP_BLE_PWR_TYPE_SCAN : for scan. + * ESP_BLE_PWR_TYPE_DEFAULT : if each connection's TX power is not set, it will use this default value. + * if neither in scan mode nor in adv mode, it will use this default value. + * If none of power type is set, system will use ESP_PWR_LVL_P3 as default for ADV/SCAN/CONN0-9. + */ +typedef enum { + ESP_BLE_PWR_TYPE_CONN_HDL0 = 0, /*!< For connection handle 0 */ + ESP_BLE_PWR_TYPE_CONN_HDL1 = 1, /*!< For connection handle 1 */ + ESP_BLE_PWR_TYPE_CONN_HDL2 = 2, /*!< For connection handle 2 */ + ESP_BLE_PWR_TYPE_CONN_HDL3 = 3, /*!< For connection handle 3 */ + ESP_BLE_PWR_TYPE_CONN_HDL4 = 4, /*!< For connection handle 4 */ + ESP_BLE_PWR_TYPE_CONN_HDL5 = 5, /*!< For connection handle 5 */ + ESP_BLE_PWR_TYPE_CONN_HDL6 = 6, /*!< For connection handle 6 */ + ESP_BLE_PWR_TYPE_CONN_HDL7 = 7, /*!< For connection handle 7 */ + ESP_BLE_PWR_TYPE_CONN_HDL8 = 8, /*!< For connection handle 8 */ + ESP_BLE_PWR_TYPE_ADV = 9, /*!< For advertising */ + ESP_BLE_PWR_TYPE_SCAN = 10, /*!< For scan */ + ESP_BLE_PWR_TYPE_DEFAULT = 11, /*!< For default, if not set other, it will use default value */ + ESP_BLE_PWR_TYPE_NUM = 12, /*!< TYPE numbers */ +} esp_ble_power_type_t; + +/** + * @brief Bluetooth TX power level(index), it's just a index corresponding to power(dbm). + */ +typedef enum { + ESP_PWR_LVL_N24 = 0, /*!< Corresponding to -24dbm */ + ESP_PWR_LVL_N21 = 1, /*!< Corresponding to -21dbm */ + ESP_PWR_LVL_N18 = 2, /*!< Corresponding to -18dbm */ + ESP_PWR_LVL_N15 = 3, /*!< Corresponding to -15dbm */ + ESP_PWR_LVL_N12 = 4, /*!< Corresponding to -12dbm */ + ESP_PWR_LVL_N9 = 5, /*!< Corresponding to -9dbm */ + ESP_PWR_LVL_N6 = 6, /*!< Corresponding to -6dbm */ + ESP_PWR_LVL_N3 = 7, /*!< Corresponding to -3dbm */ + ESP_PWR_LVL_N0 = 8, /*!< Corresponding to 0dbm */ + ESP_PWR_LVL_P3 = 9, /*!< Corresponding to +3dbm */ + ESP_PWR_LVL_P6 = 10, /*!< Corresponding to +6dbm */ + ESP_PWR_LVL_P9 = 11, /*!< Corresponding to +9dbm */ + ESP_PWR_LVL_P12 = 12, /*!< Corresponding to +12dbm */ + ESP_PWR_LVL_P15 = 13, /*!< Corresponding to +15dbm */ + ESP_PWR_LVL_P18 = 14, /*!< Corresponding to +18dbm */ + ESP_PWR_LVL_P21 = 15, /*!< Corresponding to +21dbm */ + ESP_PWR_LVL_INVALID = 0xFF, /*!< Indicates an invalid value */ +} esp_power_level_t; + +/** + * @brief Set BLE TX power + * Connection Tx power should only be set after connection created. + * @param power_type : The type of which tx power, could set Advertising/Connection/Default and etc + * @param power_level: Power level(index) corresponding to absolute value(dbm) + * @return ESP_OK - success, other - failed + */ +esp_err_t esp_ble_tx_power_set(esp_ble_power_type_t power_type, esp_power_level_t power_level); + +/** + * @brief Get BLE TX power + * Connection Tx power should only be get after connection created. + * @param power_type : The type of which tx power, could set Advertising/Connection/Default and etc + * @return >= 0 - Power level, < 0 - Invalid + */ +esp_power_level_t esp_ble_tx_power_get(esp_ble_power_type_t power_type); + +/** + * @brief Initialize BT controller to allocate task and other resource. + * This function should be called only once, before any other BT functions are called. + * @param cfg: Initial configuration of BT controller. Different from previous version, there's a mode and some + * connection configuration in "cfg" to configure controller work mode and allocate the resource which is needed. + * @return ESP_OK - success, other - failed + */ +esp_err_t esp_bt_controller_init(esp_bt_controller_config_t *cfg); + +/** + * @brief De-initialize BT controller to free resource and delete task. + * You should stop advertising and scanning, as well as + * disconnect all existing connections before de-initializing BT controller. + * + * This function should be called only once, after any other BT functions are called. + * This function is not whole completed, esp_bt_controller_init cannot called after this function. + * @return ESP_OK - success, other - failed + */ +esp_err_t esp_bt_controller_deinit(void); + +/** + * @brief Enable BT controller. + * Due to a known issue, you cannot call esp_bt_controller_enable() a second time + * to change the controller mode dynamically. To change controller mode, call + * esp_bt_controller_disable() and then call esp_bt_controller_enable() with the new mode. + * @param mode : the mode(BLE/BT/BTDM) to enable. For compatible of API, retain this argument. This mode must be + * equal as the mode in "cfg" of esp_bt_controller_init(). + * @return ESP_OK - success, other - failed + */ +esp_err_t esp_bt_controller_enable(esp_bt_mode_t mode); + +/** + * @brief Disable BT controller + * @return ESP_OK - success, other - failed + */ +esp_err_t esp_bt_controller_disable(void); + +/** + * @brief Get BT controller is initialised/de-initialised/enabled/disabled + * @return status value + */ +esp_bt_controller_status_t esp_bt_controller_get_status(void); + +uint16_t esp_bt_get_tx_buf_num(void); + +/** @brief esp_vhci_host_callback + * used for vhci call host function to notify what host need to do + */ +typedef struct esp_vhci_host_callback { + void (*notify_host_send_available)(void); /*!< callback used to notify that the host can send packet to controller */ + int (*notify_host_recv)(uint8_t *data, uint16_t len); /*!< callback used to notify that the controller has a packet to send to the host*/ +} esp_vhci_host_callback_t; + +/** @brief esp_vhci_host_check_send_available + * used for check actively if the host can send packet to controller or not. + * @return true for ready to send, false means cannot send packet + */ +bool esp_vhci_host_check_send_available(void); + +/** @brief esp_vhci_host_send_packet + * host send packet to controller + * + * Should not call this function from within a critical section + * or when the scheduler is suspended. + * + * @param data the packet point + * @param len the packet length + */ +void esp_vhci_host_send_packet(uint8_t *data, uint16_t len); + +/** @brief esp_vhci_host_register_callback + * register the vhci reference callback + * struct defined by vhci_host_callback structure. + * @param callback esp_vhci_host_callback type variable + * @return ESP_OK - success, ESP_FAIL - failed + */ +esp_err_t esp_vhci_host_register_callback(const esp_vhci_host_callback_t *callback); + +/** @brief esp_bt_controller_mem_release + * release the controller memory as per the mode + * + * This function releases the BSS, data and other sections of the controller to heap. The total size is about 70k bytes. + * + * esp_bt_controller_mem_release(mode) should be called only before esp_bt_controller_init() + * or after esp_bt_controller_deinit(). + * + * Note that once BT controller memory is released, the process cannot be reversed. It means you cannot use the bluetooth + * mode which you have released by this function. + * + * If your firmware will later upgrade the Bluetooth controller mode (BLE -> BT Classic or disabled -> enabled) + * then do not call this function. + * + * If the app calls esp_bt_controller_enable(ESP_BT_MODE_BLE) to use BLE only then it is safe to call + * esp_bt_controller_mem_release(ESP_BT_MODE_CLASSIC_BT) at initialization time to free unused BT Classic memory. + * + * If the mode is ESP_BT_MODE_BTDM, then it may be useful to call API esp_bt_mem_release(ESP_BT_MODE_BTDM) instead, + * which internally calls esp_bt_controller_mem_release(ESP_BT_MODE_BTDM) and additionally releases the BSS and data + * consumed by the BT/BLE host stack to heap. For more details about usage please refer to the documentation of + * esp_bt_mem_release() function + * + * @param mode : the mode want to release memory + * @return ESP_OK - success, other - failed + */ +esp_err_t esp_bt_controller_mem_release(esp_bt_mode_t mode); + +/** @brief esp_bt_mem_release + * release controller memory and BSS and data section of the BT/BLE host stack as per the mode + * + * This function first releases controller memory by internally calling esp_bt_controller_mem_release(). + * Additionally, if the mode is set to ESP_BT_MODE_BTDM, it also releases the BSS and data consumed by the BT/BLE host stack to heap + * + * Note that once BT memory is released, the process cannot be reversed. It means you cannot use the bluetooth + * mode which you have released by this function. + * + * If your firmware will later upgrade the Bluetooth controller mode (BLE -> BT Classic or disabled -> enabled) + * then do not call this function. + * + * If you never intend to use bluetooth in a current boot-up cycle, you can call esp_bt_mem_release(ESP_BT_MODE_BTDM) + * before esp_bt_controller_init or after esp_bt_controller_deinit. + * + * For example, if a user only uses bluetooth for setting the WiFi configuration, and does not use bluetooth in the rest of the product operation". + * In such cases, after receiving the WiFi configuration, you can disable/deinit bluetooth and release its memory. + * Below is the sequence of APIs to be called for such scenarios: + * + * esp_bluedroid_disable(); + * esp_bluedroid_deinit(); + * esp_bt_controller_disable(); + * esp_bt_controller_deinit(); + * esp_bt_mem_release(ESP_BT_MODE_BTDM); + * + * @param mode : the mode whose memory is to be released + * @return ESP_OK - success, other - failed + */ +esp_err_t esp_bt_mem_release(esp_bt_mode_t mode); + +/** + * @brief enable bluetooth to enter modem sleep + * + * Note that this function shall not be invoked before esp_bt_controller_enable() + * + * There are currently two options for bluetooth modem sleep, one is ORIG mode, and another is EVED Mode. EVED Mode is intended for BLE only. + * + * For ORIG mode: + * Bluetooth modem sleep is enabled in controller start up by default if CONFIG_BTDM_CONTROLLER_MODEM_SLEEP is set and "ORIG mode" is selected. In ORIG modem sleep mode, bluetooth controller will switch off some components and pause to work every now and then, if there is no event to process; and wakeup according to the scheduled interval and resume the work. It can also wakeup earlier upon external request using function "esp_bt_controller_wakeup_request". + * + * @return + * - ESP_OK : success + * - other : failed + */ +esp_err_t esp_bt_sleep_enable(void); + + +/** + * @brief disable bluetooth modem sleep + * + * Note that this function shall not be invoked before esp_bt_controller_enable() + * + * If esp_bt_sleep_disable() is called, bluetooth controller will not be allowed to enter modem sleep; + * + * If ORIG modem sleep mode is in use, if this function is called, bluetooth controller may not immediately wake up if it is dormant then. + * In this case, esp_bt_controller_wakeup_request() can be used to shorten the time for wakeup. + * + * @return + * - ESP_OK : success + * - other : failed + */ +esp_err_t esp_bt_sleep_disable(void); + +/** + * @brief to check whether bluetooth controller is sleeping at the instant, if modem sleep is enabled + * + * Note that this function shall not be invoked before esp_bt_controller_enable() + * This function is supposed to be used ORIG mode of modem sleep + * + * @return true if in modem sleep state, false otherwise + */ +bool esp_bt_controller_is_sleeping(void); + +/** + * @brief request controller to wakeup from sleeping state during sleep mode + * + * Note that this function shall not be invoked before esp_bt_controller_enable() + * Note that this function is supposed to be used ORIG mode of modem sleep + * Note that after this request, bluetooth controller may again enter sleep as long as the modem sleep is enabled + * + * Profiling shows that it takes several milliseconds to wakeup from modem sleep after this request. + * Generally it takes longer if 32kHz XTAL is used than the main XTAL, due to the lower frequency of the former as the bluetooth low power clock source. + */ +void esp_bt_controller_wakeup_request(void); + +/** + * @brief notify bluetooth controller task to process the event upon Tx or Rx done + * + * Note that this function shall not be invoked before esp_bt_controller_enable() + * This function can be called in both ISR and non-ISR context + * + */ +int esp_bt_h4tl_eif_io_event_notify(int event); + +/** + * @brief bt Wi-Fi power domain power on + */ +void esp_wifi_bt_power_domain_on(void); + +/** + * @brief bt Wi-Fi power domain power off + */ +void esp_wifi_bt_power_domain_off(void); + +#ifdef __cplusplus +} +#endif + +#endif /* __ESP_BT_H__ */ diff --git a/espradio/blobs/headers/esp32c3/phy_init_data.h b/espradio/blobs/headers/esp32c3/phy_init_data.h new file mode 100644 index 000000000..212cd582d --- /dev/null +++ b/espradio/blobs/headers/esp32c3/phy_init_data.h @@ -0,0 +1,182 @@ +/* + * SPDX-FileCopyrightText: 2016-2021 Espressif Systems (Shanghai) CO LTD + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#ifndef PHY_INIT_DATA_H +#define PHY_INIT_DATA_H /* don't use #pragma once here, we compile this file sometimes */ +#include "esp_phy_init.h" +#include "sdkconfig.h" + +#ifdef __cplusplus +extern "C" { +#endif + +// constrain a value between 'low' and 'high', inclusive +#define LIMIT(val, low, high) ((val < low) ? low : (val > high) ? high : val) + +#define PHY_INIT_MAGIC "PHYINIT" + +// define the lowest tx power as LOWEST_PHY_TX_POWER +#define PHY_TX_POWER_LOWEST LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 52) +#define PHY_TX_POWER_OFFSET 2 +#define PHY_TX_POWER_NUM 14 + +#if CONFIG_ESP_PHY_MULTIPLE_INIT_DATA_BIN +#define PHY_CRC_ALGORITHM 1 +#define PHY_COUNTRY_CODE_LEN 2 +#define PHY_INIT_DATA_TYPE_OFFSET 126 +#define PHY_SUPPORT_MULTIPLE_BIN_OFFSET 125 +#endif + +static const char __attribute__((section(".rodata"))) phy_init_magic_pre[] = PHY_INIT_MAGIC; + +/** + * @brief Structure containing default recommended PHY initialization parameters. + */ +static const esp_phy_init_data_t phy_init_data= { { + 0x00, + 0x00, + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x50), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x50), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x50), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x4c), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x4c), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x48), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x4c), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x48), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x48), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x44), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x4a), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x46), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x46), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x42), + 0x00, + 0x00, + 0x00, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0x74 +} }; + +static const char __attribute__((section(".rodata"))) phy_init_magic_post[] = PHY_INIT_MAGIC; + +#if CONFIG_ESP_PHY_MULTIPLE_INIT_DATA_BIN +/** + * @brief PHY init data control infomation structure + */ +typedef struct { + uint8_t control_info_checksum[4]; /*!< 4-byte control infomation checksum */ + uint8_t multiple_bin_checksum[4]; /*!< 4-byte multiple bin checksum */ + uint8_t check_algorithm; /*!< check algorithm */ + uint8_t version; /*!< PHY init data bin version */ + uint8_t number; /*!< PHY init data bin number */ + uint8_t length[2]; /*!< Length of each PHY init data bin */ + uint8_t reserved[19]; /*!< 19-byte reserved */ +} __attribute__ ((packed)) phy_control_info_data_t; + +/** + * @brief Country corresponds to PHY init data type structure + */ +typedef struct { + char cc[PHY_COUNTRY_CODE_LEN]; + uint8_t type; +} phy_country_to_bin_type_t; +#endif + +#ifdef __cplusplus +} +#endif + +#endif /* PHY_INIT_DATA_H */ diff --git a/espradio/blobs/headers/esp32c3/sdkconfig.h b/espradio/blobs/headers/esp32c3/sdkconfig.h new file mode 100644 index 000000000..c89eee54f --- /dev/null +++ b/espradio/blobs/headers/esp32c3/sdkconfig.h @@ -0,0 +1,930 @@ +/* + * Automatically generated file. DO NOT EDIT. + * Espressif IoT Development Framework (ESP-IDF) 5.1.2 Configuration Header + */ +#pragma once +#define CONFIG_SOC_ADC_SUPPORTED 1 +#define CONFIG_SOC_DEDICATED_GPIO_SUPPORTED 1 +#define CONFIG_SOC_UART_SUPPORTED 1 +#define CONFIG_SOC_GDMA_SUPPORTED 1 +#define CONFIG_SOC_GPTIMER_SUPPORTED 1 +#define CONFIG_SOC_TWAI_SUPPORTED 1 +#define CONFIG_SOC_BT_SUPPORTED 1 +#define CONFIG_SOC_ASYNC_MEMCPY_SUPPORTED 1 +#define CONFIG_SOC_USB_SERIAL_JTAG_SUPPORTED 1 +#define CONFIG_SOC_TEMP_SENSOR_SUPPORTED 1 +#define CONFIG_SOC_XT_WDT_SUPPORTED 1 +#define CONFIG_SOC_WIFI_SUPPORTED 1 +#define CONFIG_SOC_SUPPORTS_SECURE_DL_MODE 1 +#define CONFIG_SOC_EFUSE_KEY_PURPOSE_FIELD 1 +#define CONFIG_SOC_EFUSE_HAS_EFUSE_RST_BUG 1 +#define CONFIG_SOC_RTC_FAST_MEM_SUPPORTED 1 +#define CONFIG_SOC_RTC_MEM_SUPPORTED 1 +#define CONFIG_SOC_I2S_SUPPORTED 1 +#define CONFIG_SOC_RMT_SUPPORTED 1 +#define CONFIG_SOC_SDM_SUPPORTED 1 +#define CONFIG_SOC_GPSPI_SUPPORTED 1 +#define CONFIG_SOC_LEDC_SUPPORTED 1 +#define CONFIG_SOC_I2C_SUPPORTED 1 +#define CONFIG_SOC_SYSTIMER_SUPPORTED 1 +#define CONFIG_SOC_SUPPORT_COEXISTENCE 1 +#define CONFIG_SOC_AES_SUPPORTED 1 +#define CONFIG_SOC_MPI_SUPPORTED 1 +#define CONFIG_SOC_SHA_SUPPORTED 1 +#define CONFIG_SOC_HMAC_SUPPORTED 1 +#define CONFIG_SOC_DIG_SIGN_SUPPORTED 1 +#define CONFIG_SOC_FLASH_ENC_SUPPORTED 1 +#define CONFIG_SOC_SECURE_BOOT_SUPPORTED 1 +#define CONFIG_SOC_MEMPROT_SUPPORTED 1 +#define CONFIG_SOC_BOD_SUPPORTED 1 +#define CONFIG_SOC_XTAL_SUPPORT_40M 1 +#define CONFIG_SOC_AES_SUPPORT_DMA 1 +#define CONFIG_SOC_AES_GDMA 1 +#define CONFIG_SOC_AES_SUPPORT_AES_128 1 +#define CONFIG_SOC_AES_SUPPORT_AES_256 1 +#define CONFIG_SOC_ADC_DIG_CTRL_SUPPORTED 1 +#define CONFIG_SOC_ADC_ARBITER_SUPPORTED 1 +#define CONFIG_SOC_ADC_DIG_IIR_FILTER_SUPPORTED 1 +#define CONFIG_SOC_ADC_MONITOR_SUPPORTED 1 +#define CONFIG_SOC_ADC_DMA_SUPPORTED 1 +#define CONFIG_SOC_ADC_PERIPH_NUM 2 +#define CONFIG_SOC_ADC_MAX_CHANNEL_NUM 5 +#define CONFIG_SOC_ADC_ATTEN_NUM 4 +#define CONFIG_SOC_ADC_DIGI_CONTROLLER_NUM 1 +#define CONFIG_SOC_ADC_PATT_LEN_MAX 8 +#define CONFIG_SOC_ADC_DIGI_MIN_BITWIDTH 12 +#define CONFIG_SOC_ADC_DIGI_MAX_BITWIDTH 12 +#define CONFIG_SOC_ADC_DIGI_RESULT_BYTES 4 +#define CONFIG_SOC_ADC_DIGI_DATA_BYTES_PER_CONV 4 +#define CONFIG_SOC_ADC_DIGI_IIR_FILTER_NUM 2 +#define CONFIG_SOC_ADC_DIGI_MONITOR_NUM 2 +#define CONFIG_SOC_ADC_SAMPLE_FREQ_THRES_HIGH 83333 +#define CONFIG_SOC_ADC_SAMPLE_FREQ_THRES_LOW 611 +#define CONFIG_SOC_ADC_RTC_MIN_BITWIDTH 12 +#define CONFIG_SOC_ADC_RTC_MAX_BITWIDTH 12 +#define CONFIG_SOC_ADC_CALIBRATION_V1_SUPPORTED 1 +#define CONFIG_SOC_ADC_SELF_HW_CALI_SUPPORTED 1 +#define CONFIG_SOC_APB_BACKUP_DMA 1 +#define CONFIG_SOC_BROWNOUT_RESET_SUPPORTED 1 +#define CONFIG_SOC_SHARED_IDCACHE_SUPPORTED 1 +#define CONFIG_SOC_CACHE_MEMORY_IBANK_SIZE 0x4000 +#define CONFIG_SOC_CPU_CORES_NUM 1 +#define CONFIG_SOC_CPU_INTR_NUM 32 +#define CONFIG_SOC_CPU_HAS_FLEXIBLE_INTC 1 +#define CONFIG_SOC_CPU_BREAKPOINTS_NUM 8 +#define CONFIG_SOC_CPU_WATCHPOINTS_NUM 8 +#define CONFIG_SOC_CPU_WATCHPOINT_MAX_REGION_SIZE 0x80000000 +#define CONFIG_SOC_DS_SIGNATURE_MAX_BIT_LEN 3072 +#define CONFIG_SOC_DS_KEY_PARAM_MD_IV_LENGTH 16 +#define CONFIG_SOC_DS_KEY_CHECK_MAX_WAIT_US 1100 +#define CONFIG_SOC_GDMA_GROUPS 1 +#define CONFIG_SOC_GDMA_PAIRS_PER_GROUP 3 +#define CONFIG_SOC_GDMA_TX_RX_SHARE_INTERRUPT 1 +#define CONFIG_SOC_GPIO_PORT 1 +#define CONFIG_SOC_GPIO_PIN_COUNT 22 +#define CONFIG_SOC_GPIO_SUPPORT_PIN_GLITCH_FILTER 1 +#define CONFIG_SOC_GPIO_FILTER_CLK_SUPPORT_APB 1 +#define CONFIG_SOC_GPIO_SUPPORT_FORCE_HOLD 1 +#define CONFIG_SOC_GPIO_SUPPORT_DEEPSLEEP_WAKEUP 1 +#define CONFIG_SOC_GPIO_DEEP_SLEEP_WAKE_VALID_GPIO_MASK 0 +#define CONFIG_SOC_GPIO_VALID_DIGITAL_IO_PAD_MASK 0x00000000003FFFC0 +#define CONFIG_SOC_DEDIC_GPIO_OUT_CHANNELS_NUM 8 +#define CONFIG_SOC_DEDIC_GPIO_IN_CHANNELS_NUM 8 +#define CONFIG_SOC_DEDIC_PERIPH_ALWAYS_ENABLE 1 +#define CONFIG_SOC_I2C_NUM 1 +#define CONFIG_SOC_I2C_FIFO_LEN 32 +#define CONFIG_SOC_I2C_CMD_REG_NUM 8 +#define CONFIG_SOC_I2C_SUPPORT_SLAVE 1 +#define CONFIG_SOC_I2C_SUPPORT_HW_CLR_BUS 1 +#define CONFIG_SOC_I2C_SUPPORT_XTAL 1 +#define CONFIG_SOC_I2C_SUPPORT_RTC 1 +#define CONFIG_SOC_I2S_NUM 1 +#define CONFIG_SOC_I2S_HW_VERSION_2 1 +#define CONFIG_SOC_I2S_SUPPORTS_XTAL 1 +#define CONFIG_SOC_I2S_SUPPORTS_PLL_F160M 1 +#define CONFIG_SOC_I2S_SUPPORTS_PCM 1 +#define CONFIG_SOC_I2S_SUPPORTS_PDM 1 +#define CONFIG_SOC_I2S_SUPPORTS_PDM_TX 1 +#define CONFIG_SOC_I2S_PDM_MAX_TX_LINES 2 +#define CONFIG_SOC_I2S_SUPPORTS_TDM 1 +#define CONFIG_SOC_LEDC_SUPPORT_APB_CLOCK 1 +#define CONFIG_SOC_LEDC_SUPPORT_XTAL_CLOCK 1 +#define CONFIG_SOC_LEDC_CHANNEL_NUM 6 +#define CONFIG_SOC_LEDC_TIMER_BIT_WIDTH 14 +#define CONFIG_SOC_LEDC_SUPPORT_FADE_STOP 1 +#define CONFIG_SOC_MMU_LINEAR_ADDRESS_REGION_NUM 1 +#define CONFIG_SOC_MMU_PERIPH_NUM 1 +#define CONFIG_SOC_MPU_MIN_REGION_SIZE 0x20000000 +#define CONFIG_SOC_MPU_REGIONS_MAX_NUM 8 +#define CONFIG_SOC_RMT_GROUPS 1 +#define CONFIG_SOC_RMT_TX_CANDIDATES_PER_GROUP 2 +#define CONFIG_SOC_RMT_RX_CANDIDATES_PER_GROUP 2 +#define CONFIG_SOC_RMT_CHANNELS_PER_GROUP 4 +#define CONFIG_SOC_RMT_MEM_WORDS_PER_CHANNEL 48 +#define CONFIG_SOC_RMT_SUPPORT_RX_PINGPONG 1 +#define CONFIG_SOC_RMT_SUPPORT_RX_DEMODULATION 1 +#define CONFIG_SOC_RMT_SUPPORT_TX_ASYNC_STOP 1 +#define CONFIG_SOC_RMT_SUPPORT_TX_LOOP_COUNT 1 +#define CONFIG_SOC_RMT_SUPPORT_TX_SYNCHRO 1 +#define CONFIG_SOC_RMT_SUPPORT_TX_CARRIER_DATA_ONLY 1 +#define CONFIG_SOC_RMT_SUPPORT_XTAL 1 +#define CONFIG_SOC_RMT_SUPPORT_APB 1 +#define CONFIG_SOC_RMT_SUPPORT_RC_FAST 1 +#define CONFIG_SOC_RTC_CNTL_CPU_PD_DMA_BUS_WIDTH 128 +#define CONFIG_SOC_RTC_CNTL_CPU_PD_REG_FILE_NUM 108 +#define CONFIG_SOC_RTCIO_PIN_COUNT 0 +#define CONFIG_SOC_RSA_MAX_BIT_LEN 3072 +#define CONFIG_SOC_SHA_DMA_MAX_BUFFER_SIZE 3968 +#define CONFIG_SOC_SHA_SUPPORT_DMA 1 +#define CONFIG_SOC_SHA_SUPPORT_RESUME 1 +#define CONFIG_SOC_SHA_GDMA 1 +#define CONFIG_SOC_SHA_SUPPORT_SHA1 1 +#define CONFIG_SOC_SHA_SUPPORT_SHA224 1 +#define CONFIG_SOC_SHA_SUPPORT_SHA256 1 +#define CONFIG_SOC_SDM_GROUPS 1 +#define CONFIG_SOC_SDM_CHANNELS_PER_GROUP 4 +#define CONFIG_SOC_SDM_CLK_SUPPORT_APB 1 +#define CONFIG_SOC_SPI_PERIPH_NUM 2 +#define CONFIG_SOC_SPI_MAX_CS_NUM 6 +#define CONFIG_SOC_SPI_MAXIMUM_BUFFER_SIZE 64 +#define CONFIG_SOC_SPI_SUPPORT_DDRCLK 1 +#define CONFIG_SOC_SPI_SLAVE_SUPPORT_SEG_TRANS 1 +#define CONFIG_SOC_SPI_SUPPORT_CD_SIG 1 +#define CONFIG_SOC_SPI_SUPPORT_CONTINUOUS_TRANS 1 +#define CONFIG_SOC_SPI_SUPPORT_SLAVE_HD_VER2 1 +#define CONFIG_SOC_SPI_SUPPORT_CLK_APB 1 +#define CONFIG_SOC_SPI_SUPPORT_CLK_XTAL 1 +#define CONFIG_SOC_SPI_PERIPH_SUPPORT_CONTROL_DUMMY_OUT 1 +#define CONFIG_SOC_MEMSPI_IS_INDEPENDENT 1 +#define CONFIG_SOC_SPI_MAX_PRE_DIVIDER 16 +#define CONFIG_SOC_SPI_MEM_SUPPORT_AUTO_WAIT_IDLE 1 +#define CONFIG_SOC_SPI_MEM_SUPPORT_AUTO_SUSPEND 1 +#define CONFIG_SOC_SPI_MEM_SUPPORT_AUTO_RESUME 1 +#define CONFIG_SOC_SPI_MEM_SUPPORT_IDLE_INTR 1 +#define CONFIG_SOC_SPI_MEM_SUPPORT_SW_SUSPEND 1 +#define CONFIG_SOC_SPI_MEM_SUPPORT_CHECK_SUS 1 +#define CONFIG_SOC_SPI_MEM_SUPPORT_CONFIG_GPIO_BY_EFUSE 1 +#define CONFIG_SOC_SPI_MEM_SUPPORT_WRAP 1 +#define CONFIG_SOC_MEMSPI_SRC_FREQ_80M_SUPPORTED 1 +#define CONFIG_SOC_MEMSPI_SRC_FREQ_40M_SUPPORTED 1 +#define CONFIG_SOC_MEMSPI_SRC_FREQ_26M_SUPPORTED 1 +#define CONFIG_SOC_MEMSPI_SRC_FREQ_20M_SUPPORTED 1 +#define CONFIG_SOC_SYSTIMER_COUNTER_NUM 2 +#define CONFIG_SOC_SYSTIMER_ALARM_NUM 3 +#define CONFIG_SOC_SYSTIMER_BIT_WIDTH_LO 32 +#define CONFIG_SOC_SYSTIMER_BIT_WIDTH_HI 20 +#define CONFIG_SOC_SYSTIMER_FIXED_DIVIDER 1 +#define CONFIG_SOC_SYSTIMER_INT_LEVEL 1 +#define CONFIG_SOC_SYSTIMER_ALARM_MISS_COMPENSATE 1 +#define CONFIG_SOC_TIMER_GROUPS 2 +#define CONFIG_SOC_TIMER_GROUP_TIMERS_PER_GROUP 1 +#define CONFIG_SOC_TIMER_GROUP_COUNTER_BIT_WIDTH 54 +#define CONFIG_SOC_TIMER_GROUP_SUPPORT_XTAL 1 +#define CONFIG_SOC_TIMER_GROUP_SUPPORT_APB 1 +#define CONFIG_SOC_TIMER_GROUP_TOTAL_TIMERS 2 +#define CONFIG_SOC_MWDT_SUPPORT_XTAL 1 +#define CONFIG_SOC_TWAI_CONTROLLER_NUM 1 +#define CONFIG_SOC_TWAI_CLK_SUPPORT_APB 1 +#define CONFIG_SOC_TWAI_BRP_MIN 2 +#define CONFIG_SOC_TWAI_BRP_MAX 16384 +#define CONFIG_SOC_TWAI_SUPPORTS_RX_STATUS 1 +#define CONFIG_SOC_EFUSE_DIS_DOWNLOAD_ICACHE 1 +#define CONFIG_SOC_EFUSE_DIS_PAD_JTAG 1 +#define CONFIG_SOC_EFUSE_DIS_USB_JTAG 1 +#define CONFIG_SOC_EFUSE_DIS_DIRECT_BOOT 1 +#define CONFIG_SOC_EFUSE_SOFT_DIS_JTAG 1 +#define CONFIG_SOC_EFUSE_DIS_ICACHE 1 +#define CONFIG_SOC_EFUSE_BLOCK9_KEY_PURPOSE_QUIRK 1 +#define CONFIG_SOC_SECURE_BOOT_V2_RSA 1 +#define CONFIG_SOC_EFUSE_SECURE_BOOT_KEY_DIGESTS 3 +#define CONFIG_SOC_EFUSE_REVOKE_BOOT_KEY_DIGESTS 1 +#define CONFIG_SOC_SUPPORT_SECURE_BOOT_REVOKE_KEY 1 +#define CONFIG_SOC_FLASH_ENCRYPTED_XTS_AES_BLOCK_MAX 32 +#define CONFIG_SOC_FLASH_ENCRYPTION_XTS_AES 1 +#define CONFIG_SOC_FLASH_ENCRYPTION_XTS_AES_128 1 +#define CONFIG_SOC_MEMPROT_CPU_PREFETCH_PAD_SIZE 16 +#define CONFIG_SOC_MEMPROT_MEM_ALIGN_SIZE 512 +#define CONFIG_SOC_UART_NUM 2 +#define CONFIG_SOC_UART_FIFO_LEN 128 +#define CONFIG_SOC_UART_BITRATE_MAX 5000000 +#define CONFIG_SOC_UART_SUPPORT_APB_CLK 1 +#define CONFIG_SOC_UART_SUPPORT_RTC_CLK 1 +#define CONFIG_SOC_UART_SUPPORT_XTAL_CLK 1 +#define CONFIG_SOC_UART_SUPPORT_WAKEUP_INT 1 +#define CONFIG_SOC_UART_REQUIRE_CORE_RESET 1 +#define CONFIG_SOC_UART_SUPPORT_FSM_TX_WAIT_SEND 1 +#define CONFIG_SOC_COEX_HW_PTI 1 +#define CONFIG_SOC_PHY_DIG_REGS_MEM_SIZE 21 +#define CONFIG_SOC_MAC_BB_PD_MEM_SIZE 192 +#define CONFIG_SOC_WIFI_LIGHT_SLEEP_CLK_WIDTH 12 +#define CONFIG_SOC_PM_SUPPORT_WIFI_WAKEUP 1 +#define CONFIG_SOC_PM_SUPPORT_BT_WAKEUP 1 +#define CONFIG_SOC_PM_SUPPORT_CPU_PD 1 +#define CONFIG_SOC_PM_SUPPORT_WIFI_PD 1 +#define CONFIG_SOC_PM_SUPPORT_BT_PD 1 +#define CONFIG_SOC_PM_SUPPORT_RC_FAST_PD 1 +#define CONFIG_SOC_PM_SUPPORT_VDDSDIO_PD 1 +#define CONFIG_SOC_PM_SUPPORT_MAC_BB_PD 1 +#define CONFIG_SOC_PM_CPU_RETENTION_BY_RTCCNTL 1 +#define CONFIG_SOC_PM_MODEM_RETENTION_BY_BACKUPDMA 1 +#define CONFIG_SOC_CLK_RC_FAST_D256_SUPPORTED 1 +#define CONFIG_SOC_RTC_SLOW_CLK_SUPPORT_RC_FAST_D256 1 +#define CONFIG_SOC_CLK_RC_FAST_SUPPORT_CALIBRATION 1 +#define CONFIG_SOC_CLK_XTAL32K_SUPPORTED 1 +#define CONFIG_SOC_TEMPERATURE_SENSOR_SUPPORT_FAST_RC 1 +#define CONFIG_SOC_TEMPERATURE_SENSOR_SUPPORT_XTAL 1 +#define CONFIG_SOC_WIFI_HW_TSF 1 +#define CONFIG_SOC_WIFI_FTM_SUPPORT 1 +#define CONFIG_SOC_WIFI_GCMP_SUPPORT 1 +#define CONFIG_SOC_WIFI_WAPI_SUPPORT 1 +#define CONFIG_SOC_WIFI_CSI_SUPPORT 1 +#define CONFIG_SOC_WIFI_MESH_SUPPORT 1 +#define CONFIG_SOC_WIFI_SUPPORT_VARIABLE_BEACON_WINDOW 1 +#define CONFIG_SOC_BLE_SUPPORTED 1 +#define CONFIG_SOC_BLE_MESH_SUPPORTED 1 +#define CONFIG_SOC_BLE_50_SUPPORTED 1 +#define CONFIG_SOC_BLE_DEVICE_PRIVACY_SUPPORTED 1 +#define CONFIG_SOC_BLUFI_SUPPORTED 1 +#define CONFIG_SOC_PHY_COMBO_MODULE 1 +#define CONFIG_IDF_CMAKE 1 +#define CONFIG_IDF_TARGET_ARCH_RISCV 1 +#define CONFIG_IDF_TARGET_ARCH "riscv" +#define CONFIG_IDF_TARGET "esp32c3" +#define CONFIG_IDF_TARGET_ESP32C3 1 +#define CONFIG_IDF_FIRMWARE_CHIP_ID 0x0005 +#define CONFIG_APP_BUILD_TYPE_APP_2NDBOOT 1 +#define CONFIG_APP_BUILD_GENERATE_BINARIES 1 +#define CONFIG_APP_BUILD_BOOTLOADER 1 +#define CONFIG_APP_BUILD_USE_FLASH_SECTIONS 1 +#define CONFIG_BOOTLOADER_OFFSET_IN_FLASH 0x0 +#define CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_SIZE 1 +#define CONFIG_BOOTLOADER_LOG_LEVEL_INFO 1 +#define CONFIG_BOOTLOADER_LOG_LEVEL 3 +#define CONFIG_BOOTLOADER_REGION_PROTECTION_ENABLE 1 +#define CONFIG_BOOTLOADER_WDT_ENABLE 1 +#define CONFIG_BOOTLOADER_WDT_TIME_MS 9000 +#define CONFIG_BOOTLOADER_RESERVE_RTC_SIZE 0x0 +#define CONFIG_BOOTLOADER_FLASH_XMC_SUPPORT 1 +#define CONFIG_SECURE_BOOT_V2_RSA_SUPPORTED 1 +#define CONFIG_SECURE_BOOT_V2_PREFERRED 1 +#define CONFIG_SECURE_ROM_DL_MODE_ENABLED 1 +#define CONFIG_APP_COMPILE_TIME_DATE 1 +#define CONFIG_APP_RETRIEVE_LEN_ELF_SHA 16 +#define CONFIG_ESP_ROM_HAS_CRC_LE 1 +#define CONFIG_ESP_ROM_HAS_CRC_BE 1 +#define CONFIG_ESP_ROM_HAS_MZ_CRC32 1 +#define CONFIG_ESP_ROM_HAS_JPEG_DECODE 1 +#define CONFIG_ESP_ROM_UART_CLK_IS_XTAL 1 +#define CONFIG_ESP_ROM_USB_SERIAL_DEVICE_NUM 3 +#define CONFIG_ESP_ROM_HAS_RETARGETABLE_LOCKING 1 +#define CONFIG_ESP_ROM_HAS_ERASE_0_REGION_BUG 1 +#define CONFIG_ESP_ROM_GET_CLK_FREQ 1 +#define CONFIG_ESP_ROM_NEEDS_SWSETUP_WORKAROUND 1 +#define CONFIG_ESP_ROM_HAS_LAYOUT_TABLE 1 +#define CONFIG_ESP_ROM_HAS_SPI_FLASH 1 +#define CONFIG_ESP_ROM_HAS_ETS_PRINTF_BUG 1 +#define CONFIG_ESP_ROM_HAS_NEWLIB_NANO_FORMAT 1 +#define CONFIG_ESP_ROM_NEEDS_SET_CACHE_MMU_SIZE 1 +#define CONFIG_ESP_ROM_RAM_APP_NEEDS_MMU_INIT 1 +#define CONFIG_BOOT_ROM_LOG_ALWAYS_ON 1 +#define CONFIG_ESPTOOLPY_FLASHMODE_DIO 1 +#define CONFIG_ESPTOOLPY_FLASH_SAMPLE_MODE_STR 1 +#define CONFIG_ESPTOOLPY_FLASHMODE "dio" +#define CONFIG_ESPTOOLPY_FLASHFREQ_80M 1 +#define CONFIG_ESPTOOLPY_FLASHFREQ_80M_DEFAULT 1 +#define CONFIG_ESPTOOLPY_FLASHFREQ "80m" +#define CONFIG_ESPTOOLPY_FLASHSIZE_2MB 1 +#define CONFIG_ESPTOOLPY_FLASHSIZE "2MB" +#define CONFIG_ESPTOOLPY_BEFORE_RESET 1 +#define CONFIG_ESPTOOLPY_BEFORE "default_reset" +#define CONFIG_ESPTOOLPY_AFTER_RESET 1 +#define CONFIG_ESPTOOLPY_AFTER "hard_reset" +#define CONFIG_ESPTOOLPY_MONITOR_BAUD 115200 +#define CONFIG_PARTITION_TABLE_SINGLE_APP 1 +#define CONFIG_PARTITION_TABLE_CUSTOM_FILENAME "partitions.csv" +#define CONFIG_PARTITION_TABLE_FILENAME "partitions_singleapp.csv" +#define CONFIG_PARTITION_TABLE_OFFSET 0x8000 +#define CONFIG_PARTITION_TABLE_MD5 1 +#define CONFIG_COMPILER_OPTIMIZATION_SIZE 1 +#define CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_ENABLE 1 +#define CONFIG_COMPILER_FLOAT_LIB_FROM_GCCLIB 1 +#define CONFIG_COMPILER_OPTIMIZATION_ASSERTION_LEVEL 2 +#define CONFIG_COMPILER_HIDE_PATHS_MACROS 1 +#define CONFIG_COMPILER_STACK_CHECK_MODE_NONE 1 +#define CONFIG_APPTRACE_DEST_NONE 1 +#define CONFIG_APPTRACE_DEST_UART_NONE 1 +#define CONFIG_APPTRACE_UART_TASK_PRIO 1 +#define CONFIG_APPTRACE_LOCK_ENABLE 1 +#define CONFIG_BT_ENABLED 1 +#define CONFIG_BT_BLUEDROID_ENABLED 1 +#define CONFIG_BT_CONTROLLER_ENABLED 1 +#define CONFIG_BT_BTC_TASK_STACK_SIZE 3072 +#define CONFIG_BT_BLUEDROID_PINNED_TO_CORE 0 +#define CONFIG_BT_BTU_TASK_STACK_SIZE 4096 +#define CONFIG_BT_BLE_ENABLED 1 +#define CONFIG_BT_GATTS_ENABLE 1 +#define CONFIG_BT_GATT_MAX_SR_PROFILES 8 +#define CONFIG_BT_GATT_MAX_SR_ATTRIBUTES 100 +#define CONFIG_BT_GATTS_SEND_SERVICE_CHANGE_AUTO 1 +#define CONFIG_BT_GATTS_SEND_SERVICE_CHANGE_MODE 0 +#define CONFIG_BT_GATTC_ENABLE 1 +#define CONFIG_BT_GATTC_MAX_CACHE_CHAR 40 +#define CONFIG_BT_GATTC_NOTIF_REG_MAX 5 +#define CONFIG_BT_GATTC_CONNECT_RETRY_COUNT 3 +#define CONFIG_BT_BLE_SMP_ENABLE 1 +#define CONFIG_BT_LOG_HCI_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_HCI_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_BTM_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_BTM_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_L2CAP_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_L2CAP_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_RFCOMM_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_RFCOMM_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_SDP_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_SDP_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_GAP_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_GAP_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_BNEP_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_BNEP_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_PAN_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_PAN_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_A2D_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_A2D_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_AVDT_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_AVDT_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_AVCT_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_AVCT_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_AVRC_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_AVRC_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_MCA_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_MCA_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_HID_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_HID_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_APPL_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_APPL_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_GATT_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_GATT_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_SMP_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_SMP_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_BTIF_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_BTIF_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_BTC_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_BTC_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_OSI_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_OSI_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_BLUFI_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_BLUFI_TRACE_LEVEL 2 +#define CONFIG_BT_ACL_CONNECTIONS 4 +#define CONFIG_BT_MULTI_CONNECTION_ENBALE 1 +#define CONFIG_BT_SMP_ENABLE 1 +#define CONFIG_BT_BLE_ESTAB_LINK_CONN_TOUT 30 +#define CONFIG_BT_MAX_DEVICE_NAME_LEN 32 +#define CONFIG_BT_BLE_RPA_TIMEOUT 900 +#define CONFIG_BT_BLE_50_FEATURES_SUPPORTED 1 +#define CONFIG_BT_CTRL_MODE_EFF 1 +#define CONFIG_BT_CTRL_BLE_MAX_ACT 6 +#define CONFIG_BT_CTRL_BLE_MAX_ACT_EFF 6 +#define CONFIG_BT_CTRL_BLE_STATIC_ACL_TX_BUF_NB 0 +#define CONFIG_BT_CTRL_PINNED_TO_CORE 0 +#define CONFIG_BT_CTRL_HCI_MODE_VHCI 1 +#define CONFIG_BT_CTRL_HCI_TL 1 +#define CONFIG_BT_CTRL_ADV_DUP_FILT_MAX 30 +#define CONFIG_BT_BLE_CCA_MODE_NONE 1 +#define CONFIG_BT_BLE_CCA_MODE 0 +#define CONFIG_BT_CTRL_HW_CCA_VAL 20 +#define CONFIG_BT_CTRL_HW_CCA_EFF 0 +#define CONFIG_BT_CTRL_CE_LENGTH_TYPE_ORIG 1 +#define CONFIG_BT_CTRL_CE_LENGTH_TYPE_EFF 0 +#define CONFIG_BT_CTRL_TX_ANTENNA_INDEX_0 1 +#define CONFIG_BT_CTRL_TX_ANTENNA_INDEX_EFF 0 +#define CONFIG_BT_CTRL_RX_ANTENNA_INDEX_0 1 +#define CONFIG_BT_CTRL_RX_ANTENNA_INDEX_EFF 0 +#define CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_P9 1 +#define CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_EFF 11 +#define CONFIG_BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_SUPP 1 +#define CONFIG_BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_NUM 100 +#define CONFIG_BT_CTRL_BLE_ADV_REPORT_DISCARD_THRSHOLD 20 +#define CONFIG_BT_CTRL_BLE_SCAN_DUPL 1 +#define CONFIG_BT_CTRL_SCAN_DUPL_TYPE_DEVICE 1 +#define CONFIG_BT_CTRL_SCAN_DUPL_TYPE 0 +#define CONFIG_BT_CTRL_SCAN_DUPL_CACHE_SIZE 100 +#define CONFIG_BT_CTRL_DUPL_SCAN_CACHE_REFRESH_PERIOD 0 +#define CONFIG_BT_CTRL_COEX_PHY_CODED_TX_RX_TLIM_DIS 1 +#define CONFIG_BT_CTRL_COEX_PHY_CODED_TX_RX_TLIM_EFF 0 +#define CONFIG_BT_CTRL_SLEEP_MODE_EFF 0 +#define CONFIG_BT_CTRL_SLEEP_CLOCK_EFF 0 +#define CONFIG_BT_CTRL_HCI_TL_EFF 1 +#define CONFIG_SPI_MASTER_ISR_IN_IRAM 1 +#define CONFIG_SPI_SLAVE_ISR_IN_IRAM 1 +#define CONFIG_TWAI_ERRATA_FIX_LISTEN_ONLY_DOM 1 +#define CONFIG_GPTIMER_ISR_HANDLER_IN_IRAM 1 +#define CONFIG_EFUSE_MAX_BLK_LEN 256 +#define CONFIG_ESP_TLS_USING_MBEDTLS 1 +#define CONFIG_ESP_TLS_USE_DS_PERIPHERAL 1 +#define CONFIG_ESP_COEX_SW_COEXIST_ENABLE 1 +#define CONFIG_ESP_ERR_TO_NAME_LOOKUP 1 +#define CONFIG_ETH_ENABLED 1 +#define CONFIG_ETH_USE_SPI_ETHERNET 1 +#define CONFIG_ESP_EVENT_POST_FROM_ISR 1 +#define CONFIG_ESP_EVENT_POST_FROM_IRAM_ISR 1 +#define CONFIG_ESP_HTTP_CLIENT_ENABLE_HTTPS 1 +#define CONFIG_HTTPD_MAX_REQ_HDR_LEN 512 +#define CONFIG_HTTPD_MAX_URI_LEN 512 +#define CONFIG_HTTPD_ERR_RESP_NO_DELAY 1 +#define CONFIG_HTTPD_PURGE_BUF_LEN 32 +#define CONFIG_ESP32C3_REV_MIN_3 1 +#define CONFIG_ESP32C3_REV_MIN_FULL 3 +#define CONFIG_ESP_REV_MIN_FULL 3 +#define CONFIG_ESP32C3_REV_MAX_FULL 199 +#define CONFIG_ESP_REV_MAX_FULL 199 +#define CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_STA 1 +#define CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_AP 1 +#define CONFIG_ESP_MAC_ADDR_UNIVERSE_BT 1 +#define CONFIG_ESP_MAC_ADDR_UNIVERSE_ETH 1 +#define CONFIG_ESP_MAC_UNIVERSAL_MAC_ADDRESSES_FOUR 1 +#define CONFIG_ESP32C3_UNIVERSAL_MAC_ADDRESSES_FOUR 1 +#define CONFIG_ESP32C3_UNIVERSAL_MAC_ADDRESSES 4 +#define CONFIG_ESP_SLEEP_FLASH_LEAKAGE_WORKAROUND 1 +#define CONFIG_ESP_SLEEP_GPIO_RESET_WORKAROUND 1 +#define CONFIG_ESP_SLEEP_WAIT_FLASH_READY_EXTRA_DELAY 0 +#define CONFIG_ESP_SLEEP_GPIO_ENABLE_INTERNAL_RESISTORS 1 +#define CONFIG_ESP_SLEEP_SYSTIMER_STALL_WORKAROUND 1 +#define CONFIG_RTC_CLK_SRC_INT_RC 1 +#define CONFIG_RTC_CLK_CAL_CYCLES 1024 +#define CONFIG_PERIPH_CTRL_FUNC_IN_IRAM 1 +#define CONFIG_XTAL_FREQ_40 1 +#define CONFIG_XTAL_FREQ 40 +#define CONFIG_LCD_PANEL_IO_FORMAT_BUF_SIZE 32 +#define CONFIG_ESP_NETIF_IP_LOST_TIMER_INTERVAL 120 +#define CONFIG_ESP_NETIF_TCPIP_LWIP 1 +#define CONFIG_ESP_NETIF_USES_TCPIP_WITH_BSD_API 1 +#define CONFIG_ESP_PHY_CALIBRATION_AND_DATA_STORAGE 1 +#define CONFIG_ESP_PHY_MAX_WIFI_TX_POWER 20 +#define CONFIG_ESP_PHY_MAX_TX_POWER 20 +#define CONFIG_ESP_PHY_ENABLE_USB 1 +#define CONFIG_ESP_PHY_RF_CAL_PARTIAL 1 +#define CONFIG_ESP_PHY_CALIBRATION_MODE 0 +#define CONFIG_PM_POWER_DOWN_CPU_IN_LIGHT_SLEEP 1 +#define CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ_160 1 +#define CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ 160 +#define CONFIG_ESP_SYSTEM_PANIC_PRINT_REBOOT 1 +#define CONFIG_ESP_SYSTEM_PANIC_REBOOT_DELAY_SECONDS 0 +#define CONFIG_ESP_SYSTEM_SINGLE_CORE_MODE 1 +#define CONFIG_ESP_SYSTEM_RTC_FAST_MEM_AS_HEAP_DEPCHECK 1 +#define CONFIG_ESP_SYSTEM_ALLOW_RTC_FAST_MEM_AS_HEAP 1 +#define CONFIG_ESP_SYSTEM_MEMPROT_FEATURE 1 +#define CONFIG_ESP_SYSTEM_MEMPROT_FEATURE_LOCK 1 +#define CONFIG_ESP_SYSTEM_EVENT_QUEUE_SIZE 32 +#define CONFIG_ESP_SYSTEM_EVENT_TASK_STACK_SIZE 2304 +#define CONFIG_ESP_MAIN_TASK_STACK_SIZE 3584 +#define CONFIG_ESP_MAIN_TASK_AFFINITY_CPU0 1 +#define CONFIG_ESP_MAIN_TASK_AFFINITY 0x0 +#define CONFIG_ESP_MINIMAL_SHARED_STACK_SIZE 2048 +#define CONFIG_ESP_CONSOLE_UART_DEFAULT 1 +#define CONFIG_ESP_CONSOLE_SECONDARY_USB_SERIAL_JTAG 1 +#define CONFIG_ESP_CONSOLE_USB_SERIAL_JTAG_ENABLED 1 +#define CONFIG_ESP_CONSOLE_UART 1 +#define CONFIG_ESP_CONSOLE_UART_NUM 0 +#define CONFIG_ESP_CONSOLE_UART_BAUDRATE 115200 +#define CONFIG_ESP_INT_WDT 1 +#define CONFIG_ESP_INT_WDT_TIMEOUT_MS 300 +#define CONFIG_ESP_TASK_WDT_EN 1 +#define CONFIG_ESP_TASK_WDT_INIT 1 +#define CONFIG_ESP_TASK_WDT_TIMEOUT_S 5 +#define CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU0 1 +#define CONFIG_ESP_DEBUG_OCDAWARE 1 +#define CONFIG_ESP_SYSTEM_CHECK_INT_LEVEL_4 1 +#define CONFIG_ESP_BROWNOUT_DET 1 +#define CONFIG_ESP_BROWNOUT_DET_LVL_SEL_7 1 +#define CONFIG_ESP_BROWNOUT_DET_LVL 7 +#define CONFIG_ESP_SYSTEM_BROWNOUT_INTR 1 +#define CONFIG_ESP_IPC_TASK_STACK_SIZE 1024 +#define CONFIG_ESP_TIME_FUNCS_USE_RTC_TIMER 1 +#define CONFIG_ESP_TIME_FUNCS_USE_ESP_TIMER 1 +#define CONFIG_ESP_TIMER_TASK_STACK_SIZE 3584 +#define CONFIG_ESP_TIMER_INTERRUPT_LEVEL 1 +#define CONFIG_ESP_TIMER_TASK_AFFINITY 0x0 +#define CONFIG_ESP_TIMER_TASK_AFFINITY_CPU0 1 +#define CONFIG_ESP_TIMER_ISR_AFFINITY 0x1 +#define CONFIG_ESP_TIMER_ISR_AFFINITY_CPU0 1 +#define CONFIG_ESP_TIMER_IMPL_SYSTIMER 1 +#define CONFIG_ESP_WIFI_ENABLED 1 +#define CONFIG_ESP_WIFI_STATIC_RX_BUFFER_NUM 10 +#define CONFIG_ESP_WIFI_DYNAMIC_RX_BUFFER_NUM 32 +#define CONFIG_ESP_WIFI_DYNAMIC_TX_BUFFER 1 +#define CONFIG_ESP_WIFI_TX_BUFFER_TYPE 1 +#define CONFIG_ESP_WIFI_DYNAMIC_TX_BUFFER_NUM 32 +#define CONFIG_ESP_WIFI_STATIC_RX_MGMT_BUFFER 1 +#define CONFIG_ESP_WIFI_DYNAMIC_RX_MGMT_BUF 0 +#define CONFIG_ESP_WIFI_RX_MGMT_BUF_NUM_DEF 5 +#define CONFIG_ESP_WIFI_AMPDU_TX_ENABLED 1 +#define CONFIG_ESP_WIFI_TX_BA_WIN 6 +#define CONFIG_ESP_WIFI_AMPDU_RX_ENABLED 1 +#define CONFIG_ESP_WIFI_RX_BA_WIN 6 +#define CONFIG_ESP_WIFI_NVS_ENABLED 1 +#define CONFIG_ESP_WIFI_SOFTAP_BEACON_MAX_LEN 752 +#define CONFIG_ESP_WIFI_MGMT_SBUF_NUM 32 +#define CONFIG_ESP_WIFI_IRAM_OPT 1 +#define CONFIG_ESP_WIFI_RX_IRAM_OPT 1 +#define CONFIG_ESP_WIFI_ENABLE_WPA3_SAE 1 +#define CONFIG_ESP_WIFI_ENABLE_SAE_PK 1 +#define CONFIG_ESP_WIFI_SOFTAP_SAE_SUPPORT 1 +#define CONFIG_ESP_WIFI_STA_DISCONNECTED_PM_ENABLE 1 +#define CONFIG_ESP_WIFI_SOFTAP_SUPPORT 1 +#define CONFIG_ESP_WIFI_ESPNOW_MAX_ENCRYPT_NUM 7 +#define CONFIG_ESP_WIFI_MBEDTLS_CRYPTO 1 +#define CONFIG_ESP_WIFI_ENTERPRISE_SUPPORT 1 +#define CONFIG_ESP_COREDUMP_ENABLE_TO_NONE 1 +#define CONFIG_FATFS_VOLUME_COUNT 2 +#define CONFIG_FATFS_LFN_NONE 1 +#define CONFIG_FATFS_SECTOR_4096 1 +#define CONFIG_FATFS_CODEPAGE_437 1 +#define CONFIG_FATFS_CODEPAGE 437 +#define CONFIG_FATFS_FS_LOCK 0 +#define CONFIG_FATFS_TIMEOUT_MS 10000 +#define CONFIG_FATFS_PER_FILE_CACHE 1 +#define CONFIG_FATFS_VFS_FSTAT_BLKSIZE 0 +#define CONFIG_FREERTOS_UNICORE 1 +#define CONFIG_FREERTOS_HZ 100 +#define CONFIG_FREERTOS_OPTIMIZED_SCHEDULER 1 +#define CONFIG_FREERTOS_CHECK_STACKOVERFLOW_CANARY 1 +#define CONFIG_FREERTOS_THREAD_LOCAL_STORAGE_POINTERS 1 +#define CONFIG_FREERTOS_IDLE_TASK_STACKSIZE 1536 +#define CONFIG_FREERTOS_MAX_TASK_NAME_LEN 16 +#define CONFIG_FREERTOS_TIMER_TASK_PRIORITY 1 +#define CONFIG_FREERTOS_TIMER_TASK_STACK_DEPTH 2048 +#define CONFIG_FREERTOS_TIMER_QUEUE_LENGTH 10 +#define CONFIG_FREERTOS_QUEUE_REGISTRY_SIZE 0 +#define CONFIG_FREERTOS_TASK_NOTIFICATION_ARRAY_ENTRIES 1 +#define CONFIG_FREERTOS_TLSP_DELETION_CALLBACKS 1 +#define CONFIG_FREERTOS_CHECK_MUTEX_GIVEN_BY_OWNER 1 +#define CONFIG_FREERTOS_ISR_STACKSIZE 1536 +#define CONFIG_FREERTOS_INTERRUPT_BACKTRACE 1 +#define CONFIG_FREERTOS_TICK_SUPPORT_SYSTIMER 1 +#define CONFIG_FREERTOS_CORETIMER_SYSTIMER_LVL1 1 +#define CONFIG_FREERTOS_SYSTICK_USES_SYSTIMER 1 +#define CONFIG_FREERTOS_ENABLE_TASK_SNAPSHOT 1 +#define CONFIG_FREERTOS_NO_AFFINITY 0x7FFFFFFF +#define CONFIG_FREERTOS_SUPPORT_STATIC_ALLOCATION 1 +#define CONFIG_FREERTOS_DEBUG_OCDAWARE 1 +#define CONFIG_HAL_ASSERTION_EQUALS_SYSTEM 1 +#define CONFIG_HAL_DEFAULT_ASSERTION_LEVEL 2 +#define CONFIG_HAL_SPI_MASTER_FUNC_IN_IRAM 1 +#define CONFIG_HAL_SPI_SLAVE_FUNC_IN_IRAM 1 +#define CONFIG_HEAP_POISONING_DISABLED 1 +#define CONFIG_HEAP_TRACING_OFF 1 +#define CONFIG_LOG_DEFAULT_LEVEL_INFO 1 +#define CONFIG_LOG_DEFAULT_LEVEL 3 +#define CONFIG_LOG_MAXIMUM_EQUALS_DEFAULT 1 +#define CONFIG_LOG_MAXIMUM_LEVEL 3 +#define CONFIG_LOG_COLORS 1 +#define CONFIG_LOG_TIMESTAMP_SOURCE_RTOS 1 +#define CONFIG_LWIP_LOCAL_HOSTNAME "espressif" +#define CONFIG_LWIP_TCPIP_TASK_PRIO 18 +#define CONFIG_LWIP_DNS_SUPPORT_MDNS_QUERIES 1 +#define CONFIG_LWIP_TIMERS_ONDEMAND 1 +#define CONFIG_LWIP_ND6 1 +#define CONFIG_LWIP_MAX_SOCKETS 10 +#define CONFIG_LWIP_SO_REUSE 1 +#define CONFIG_LWIP_SO_REUSE_RXTOALL 1 +#define CONFIG_LWIP_IP4_FRAG 1 +#define CONFIG_LWIP_IP6_FRAG 1 +#define CONFIG_LWIP_IP_REASS_MAX_PBUFS 10 +#define CONFIG_LWIP_ESP_GRATUITOUS_ARP 1 +#define CONFIG_LWIP_GARP_TMR_INTERVAL 60 +#define CONFIG_LWIP_ESP_MLDV6_REPORT 1 +#define CONFIG_LWIP_MLDV6_TMR_INTERVAL 40 +#define CONFIG_LWIP_TCPIP_RECVMBOX_SIZE 32 +#define CONFIG_LWIP_DHCP_DOES_ARP_CHECK 1 +#define CONFIG_LWIP_DHCP_DISABLE_VENDOR_CLASS_ID 1 +#define CONFIG_LWIP_DHCP_OPTIONS_LEN 68 +#define CONFIG_LWIP_NUM_NETIF_CLIENT_DATA 0 +#define CONFIG_LWIP_DHCP_COARSE_TIMER_SECS 1 +#define CONFIG_LWIP_DHCPS 1 +#define CONFIG_LWIP_DHCPS_LEASE_UNIT 60 +#define CONFIG_LWIP_DHCPS_MAX_STATION_NUM 8 +#define CONFIG_LWIP_IPV4 1 +#define CONFIG_LWIP_IPV6 1 +#define CONFIG_LWIP_IPV6_NUM_ADDRESSES 3 +#define CONFIG_LWIP_NETIF_LOOPBACK 1 +#define CONFIG_LWIP_LOOPBACK_MAX_PBUFS 8 +#define CONFIG_LWIP_MAX_ACTIVE_TCP 16 +#define CONFIG_LWIP_MAX_LISTENING_TCP 16 +#define CONFIG_LWIP_TCP_HIGH_SPEED_RETRANSMISSION 1 +#define CONFIG_LWIP_TCP_MAXRTX 12 +#define CONFIG_LWIP_TCP_SYNMAXRTX 12 +#define CONFIG_LWIP_TCP_MSS 1440 +#define CONFIG_LWIP_TCP_TMR_INTERVAL 250 +#define CONFIG_LWIP_TCP_MSL 60000 +#define CONFIG_LWIP_TCP_FIN_WAIT_TIMEOUT 20000 +#define CONFIG_LWIP_TCP_SND_BUF_DEFAULT 5760 +#define CONFIG_LWIP_TCP_WND_DEFAULT 5760 +#define CONFIG_LWIP_TCP_RECVMBOX_SIZE 6 +#define CONFIG_LWIP_TCP_QUEUE_OOSEQ 1 +#define CONFIG_LWIP_TCP_OOSEQ_TIMEOUT 6 +#define CONFIG_LWIP_TCP_OOSEQ_MAX_PBUFS 4 +#define CONFIG_LWIP_TCP_OVERSIZE_MSS 1 +#define CONFIG_LWIP_TCP_RTO_TIME 1500 +#define CONFIG_LWIP_MAX_UDP_PCBS 16 +#define CONFIG_LWIP_UDP_RECVMBOX_SIZE 6 +#define CONFIG_LWIP_CHECKSUM_CHECK_ICMP 1 +#define CONFIG_LWIP_TCPIP_TASK_STACK_SIZE 3072 +#define CONFIG_LWIP_TCPIP_TASK_AFFINITY_NO_AFFINITY 1 +#define CONFIG_LWIP_TCPIP_TASK_AFFINITY 0x7FFFFFFF +#define CONFIG_LWIP_IPV6_MEMP_NUM_ND6_QUEUE 3 +#define CONFIG_LWIP_IPV6_ND6_NUM_NEIGHBORS 5 +#define CONFIG_LWIP_ICMP 1 +#define CONFIG_LWIP_MAX_RAW_PCBS 16 +#define CONFIG_LWIP_SNTP_MAX_SERVERS 1 +#define CONFIG_LWIP_SNTP_UPDATE_DELAY 3600000 +#define CONFIG_LWIP_BRIDGEIF_MAX_PORTS 7 +#define CONFIG_LWIP_ESP_LWIP_ASSERT 1 +#define CONFIG_LWIP_HOOK_TCP_ISN_DEFAULT 1 +#define CONFIG_LWIP_HOOK_IP6_ROUTE_NONE 1 +#define CONFIG_LWIP_HOOK_ND6_GET_GW_NONE 1 +#define CONFIG_LWIP_HOOK_IP6_SELECT_SRC_ADDR_NONE 1 +#define CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_NONE 1 +#define CONFIG_LWIP_HOOK_IP6_INPUT_NONE 1 +#define CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC 1 +#define CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN 1 +#define CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN 16384 +#define CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN 4096 +#define CONFIG_MBEDTLS_SSL_KEEP_PEER_CERTIFICATE 1 +#define CONFIG_MBEDTLS_PKCS7_C 1 +#define CONFIG_MBEDTLS_CERTIFICATE_BUNDLE 1 +#define CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_FULL 1 +#define CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_MAX_CERTS 200 +#define CONFIG_MBEDTLS_CMAC_C 1 +#define CONFIG_MBEDTLS_HARDWARE_AES 1 +#define CONFIG_MBEDTLS_AES_USE_INTERRUPT 1 +#define CONFIG_MBEDTLS_HARDWARE_MPI 1 +#define CONFIG_MBEDTLS_MPI_USE_INTERRUPT 1 +#define CONFIG_MBEDTLS_HARDWARE_SHA 1 +#define CONFIG_MBEDTLS_ROM_MD5 1 +#define CONFIG_MBEDTLS_HAVE_TIME 1 +#define CONFIG_MBEDTLS_ECDSA_DETERMINISTIC 1 +#define CONFIG_MBEDTLS_SHA512_C 1 +#define CONFIG_MBEDTLS_TLS_SERVER_AND_CLIENT 1 +#define CONFIG_MBEDTLS_TLS_SERVER 1 +#define CONFIG_MBEDTLS_TLS_CLIENT 1 +#define CONFIG_MBEDTLS_TLS_ENABLED 1 +#define CONFIG_MBEDTLS_KEY_EXCHANGE_RSA 1 +#define CONFIG_MBEDTLS_KEY_EXCHANGE_ELLIPTIC_CURVE 1 +#define CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_RSA 1 +#define CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA 1 +#define CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA 1 +#define CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_RSA 1 +#define CONFIG_MBEDTLS_SSL_RENEGOTIATION 1 +#define CONFIG_MBEDTLS_SSL_PROTO_TLS1_2 1 +#define CONFIG_MBEDTLS_SSL_ALPN 1 +#define CONFIG_MBEDTLS_CLIENT_SSL_SESSION_TICKETS 1 +#define CONFIG_MBEDTLS_SERVER_SSL_SESSION_TICKETS 1 +#define CONFIG_MBEDTLS_AES_C 1 +#define CONFIG_MBEDTLS_CCM_C 1 +#define CONFIG_MBEDTLS_GCM_C 1 +#define CONFIG_MBEDTLS_PEM_PARSE_C 1 +#define CONFIG_MBEDTLS_PEM_WRITE_C 1 +#define CONFIG_MBEDTLS_X509_CRL_PARSE_C 1 +#define CONFIG_MBEDTLS_X509_CSR_PARSE_C 1 +#define CONFIG_MBEDTLS_ECP_C 1 +#define CONFIG_MBEDTLS_ECDH_C 1 +#define CONFIG_MBEDTLS_ECDSA_C 1 +#define CONFIG_MBEDTLS_ECP_DP_SECP192R1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_SECP224R1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_SECP256R1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_SECP384R1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_SECP521R1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_SECP192K1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_SECP224K1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_SECP256K1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_BP256R1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_BP384R1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_BP512R1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_CURVE25519_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_NIST_OPTIM 1 +#define CONFIG_MBEDTLS_ECP_FIXED_POINT_OPTIM 1 +#define CONFIG_MBEDTLS_LARGE_KEY_SOFTWARE_MPI 1 +#define CONFIG_MQTT_PROTOCOL_311 1 +#define CONFIG_MQTT_TRANSPORT_SSL 1 +#define CONFIG_MQTT_TRANSPORT_WEBSOCKET 1 +#define CONFIG_MQTT_TRANSPORT_WEBSOCKET_SECURE 1 +#define CONFIG_NEWLIB_STDOUT_LINE_ENDING_CRLF 1 +#define CONFIG_NEWLIB_STDIN_LINE_ENDING_CR 1 +#define CONFIG_NEWLIB_TIME_SYSCALL_USE_RTC_HRT 1 +#define CONFIG_OPENTHREAD_NETWORK_NAME "OpenThread-ESP" +#define CONFIG_OPENTHREAD_MESH_LOCAL_PREFIX "fd00:db8:a0:0::/64" +#define CONFIG_OPENTHREAD_NETWORK_CHANNEL 15 +#define CONFIG_OPENTHREAD_NETWORK_PANID 0x1234 +#define CONFIG_OPENTHREAD_NETWORK_EXTPANID "dead00beef00cafe" +#define CONFIG_OPENTHREAD_NETWORK_MASTERKEY "00112233445566778899aabbccddeeff" +#define CONFIG_OPENTHREAD_NETWORK_PSKC "104810e2315100afd6bc9215a6bfac53" +#define CONFIG_OPENTHREAD_XTAL_ACCURACY 130 +#define CONFIG_ESP_PROTOCOMM_SUPPORT_SECURITY_VERSION_0 1 +#define CONFIG_ESP_PROTOCOMM_SUPPORT_SECURITY_VERSION_1 1 +#define CONFIG_ESP_PROTOCOMM_SUPPORT_SECURITY_VERSION_2 1 +#define CONFIG_PTHREAD_TASK_PRIO_DEFAULT 5 +#define CONFIG_PTHREAD_TASK_STACK_SIZE_DEFAULT 3072 +#define CONFIG_PTHREAD_TASK_CORE_DEFAULT -1 +#define CONFIG_PTHREAD_TASK_NAME_DEFAULT "pthread" +#define CONFIG_MMU_PAGE_SIZE_64KB 1 +#define CONFIG_MMU_PAGE_MODE "64KB" +#define CONFIG_MMU_PAGE_SIZE 0x10000 +#define CONFIG_SPI_FLASH_ROM_DRIVER_PATCH 1 +#define CONFIG_SPI_FLASH_DANGEROUS_WRITE_ABORTS 1 +#define CONFIG_SPI_FLASH_YIELD_DURING_ERASE 1 +#define CONFIG_SPI_FLASH_ERASE_YIELD_DURATION_MS 20 +#define CONFIG_SPI_FLASH_ERASE_YIELD_TICKS 1 +#define CONFIG_SPI_FLASH_WRITE_CHUNK_SIZE 8192 +#define CONFIG_SPI_FLASH_BROWNOUT_RESET_XMC 1 +#define CONFIG_SPI_FLASH_BROWNOUT_RESET 1 +#define CONFIG_SPI_FLASH_VENDOR_XMC_SUPPORTED 1 +#define CONFIG_SPI_FLASH_VENDOR_GD_SUPPORTED 1 +#define CONFIG_SPI_FLASH_VENDOR_ISSI_SUPPORTED 1 +#define CONFIG_SPI_FLASH_VENDOR_MXIC_SUPPORTED 1 +#define CONFIG_SPI_FLASH_VENDOR_WINBOND_SUPPORTED 1 +#define CONFIG_SPI_FLASH_VENDOR_BOYA_SUPPORTED 1 +#define CONFIG_SPI_FLASH_VENDOR_TH_SUPPORTED 1 +#define CONFIG_SPI_FLASH_SUPPORT_ISSI_CHIP 1 +#define CONFIG_SPI_FLASH_SUPPORT_MXIC_CHIP 1 +#define CONFIG_SPI_FLASH_SUPPORT_GD_CHIP 1 +#define CONFIG_SPI_FLASH_SUPPORT_WINBOND_CHIP 1 +#define CONFIG_SPI_FLASH_SUPPORT_BOYA_CHIP 1 +#define CONFIG_SPI_FLASH_SUPPORT_TH_CHIP 1 +#define CONFIG_SPI_FLASH_ENABLE_ENCRYPTED_READ_WRITE 1 +#define CONFIG_SPIFFS_MAX_PARTITIONS 3 +#define CONFIG_SPIFFS_CACHE 1 +#define CONFIG_SPIFFS_CACHE_WR 1 +#define CONFIG_SPIFFS_PAGE_CHECK 1 +#define CONFIG_SPIFFS_GC_MAX_RUNS 10 +#define CONFIG_SPIFFS_PAGE_SIZE 256 +#define CONFIG_SPIFFS_OBJ_NAME_LEN 32 +#define CONFIG_SPIFFS_USE_MAGIC 1 +#define CONFIG_SPIFFS_USE_MAGIC_LENGTH 1 +#define CONFIG_SPIFFS_META_LENGTH 4 +#define CONFIG_SPIFFS_USE_MTIME 1 +#define CONFIG_WS_TRANSPORT 1 +#define CONFIG_WS_BUFFER_SIZE 1024 +#define CONFIG_UNITY_ENABLE_FLOAT 1 +#define CONFIG_UNITY_ENABLE_DOUBLE 1 +#define CONFIG_UNITY_ENABLE_IDF_TEST_RUNNER 1 +#define CONFIG_VFS_SUPPORT_IO 1 +#define CONFIG_VFS_SUPPORT_DIR 1 +#define CONFIG_VFS_SUPPORT_SELECT 1 +#define CONFIG_VFS_SUPPRESS_SELECT_DEBUG_OUTPUT 1 +#define CONFIG_VFS_SUPPORT_TERMIOS 1 +#define CONFIG_VFS_MAX_COUNT 8 +#define CONFIG_VFS_SEMIHOSTFS_MAX_MOUNT_POINTS 1 +#define CONFIG_WL_SECTOR_SIZE_4096 1 +#define CONFIG_WL_SECTOR_SIZE 4096 +#define CONFIG_WIFI_PROV_SCAN_MAX_ENTRIES 16 +#define CONFIG_WIFI_PROV_AUTOSTOP_TIMEOUT 30 +#define CONFIG_WIFI_PROV_STA_ALL_CHANNEL_SCAN 1 + +/* List of deprecated options */ +#define CONFIG_A2D_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_A2D_TRACE_LEVEL +#define CONFIG_A2D_TRACE_LEVEL_WARNING CONFIG_BT_LOG_A2D_TRACE_LEVEL_WARNING +#define CONFIG_APPL_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_APPL_TRACE_LEVEL +#define CONFIG_APPL_TRACE_LEVEL_WARNING CONFIG_BT_LOG_APPL_TRACE_LEVEL_WARNING +#define CONFIG_AVCT_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_AVCT_TRACE_LEVEL +#define CONFIG_AVCT_TRACE_LEVEL_WARNING CONFIG_BT_LOG_AVCT_TRACE_LEVEL_WARNING +#define CONFIG_AVDT_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_AVDT_TRACE_LEVEL +#define CONFIG_AVDT_TRACE_LEVEL_WARNING CONFIG_BT_LOG_AVDT_TRACE_LEVEL_WARNING +#define CONFIG_AVRC_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_AVRC_TRACE_LEVEL +#define CONFIG_AVRC_TRACE_LEVEL_WARNING CONFIG_BT_LOG_AVRC_TRACE_LEVEL_WARNING +#define CONFIG_BLE_ESTABLISH_LINK_CONNECTION_TIMEOUT CONFIG_BT_BLE_ESTAB_LINK_CONN_TOUT +#define CONFIG_BLE_SMP_ENABLE CONFIG_BT_BLE_SMP_ENABLE +#define CONFIG_BLUEDROID_ENABLED CONFIG_BT_BLUEDROID_ENABLED +#define CONFIG_BLUEDROID_PINNED_TO_CORE CONFIG_BT_BLUEDROID_PINNED_TO_CORE +#define CONFIG_BLUFI_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_BLUFI_TRACE_LEVEL +#define CONFIG_BLUFI_TRACE_LEVEL_WARNING CONFIG_BT_LOG_BLUFI_TRACE_LEVEL_WARNING +#define CONFIG_BNEP_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_BNEP_TRACE_LEVEL +#define CONFIG_BROWNOUT_DET CONFIG_ESP_BROWNOUT_DET +#define CONFIG_BROWNOUT_DET_LVL CONFIG_ESP_BROWNOUT_DET_LVL +#define CONFIG_BROWNOUT_DET_LVL_SEL_7 CONFIG_ESP_BROWNOUT_DET_LVL_SEL_7 +#define CONFIG_BTC_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_BTC_TRACE_LEVEL +#define CONFIG_BTC_TASK_STACK_SIZE CONFIG_BT_BTC_TASK_STACK_SIZE +#define CONFIG_BTC_TRACE_LEVEL_WARNING CONFIG_BT_LOG_BTC_TRACE_LEVEL_WARNING +#define CONFIG_BTH_LOG_SDP_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_SDP_TRACE_LEVEL +#define CONFIG_BTIF_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_BTIF_TRACE_LEVEL +#define CONFIG_BTIF_TRACE_LEVEL_WARNING CONFIG_BT_LOG_BTIF_TRACE_LEVEL_WARNING +#define CONFIG_BTM_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_BTM_TRACE_LEVEL +#define CONFIG_BTM_TRACE_LEVEL_WARNING CONFIG_BT_LOG_BTM_TRACE_LEVEL_WARNING +#define CONFIG_BTU_TASK_STACK_SIZE CONFIG_BT_BTU_TASK_STACK_SIZE +#define CONFIG_BT_NIMBLE_COEX_PHY_CODED_TX_RX_TLIM_DIS CONFIG_BT_CTRL_COEX_PHY_CODED_TX_RX_TLIM_DIS +#define CONFIG_COMPILER_OPTIMIZATION_LEVEL_RELEASE CONFIG_COMPILER_OPTIMIZATION_SIZE +#define CONFIG_CONSOLE_UART CONFIG_ESP_CONSOLE_UART +#define CONFIG_CONSOLE_UART_BAUDRATE CONFIG_ESP_CONSOLE_UART_BAUDRATE +#define CONFIG_CONSOLE_UART_DEFAULT CONFIG_ESP_CONSOLE_UART_DEFAULT +#define CONFIG_CONSOLE_UART_NUM CONFIG_ESP_CONSOLE_UART_NUM +#define CONFIG_ESP32C3_BROWNOUT_DET CONFIG_ESP_BROWNOUT_DET +#define CONFIG_ESP32C3_BROWNOUT_DET_LVL CONFIG_ESP_BROWNOUT_DET_LVL +#define CONFIG_ESP32C3_BROWNOUT_DET_LVL_SEL_7 CONFIG_ESP_BROWNOUT_DET_LVL_SEL_7 +#define CONFIG_ESP32C3_DEBUG_OCDAWARE CONFIG_ESP_DEBUG_OCDAWARE +#define CONFIG_ESP32C3_DEFAULT_CPU_FREQ_160 CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ_160 +#define CONFIG_ESP32C3_LIGHTSLEEP_GPIO_RESET_WORKAROUND CONFIG_ESP_SLEEP_GPIO_RESET_WORKAROUND +#define CONFIG_ESP32C3_MEMPROT_FEATURE CONFIG_ESP_SYSTEM_MEMPROT_FEATURE +#define CONFIG_ESP32C3_MEMPROT_FEATURE_LOCK CONFIG_ESP_SYSTEM_MEMPROT_FEATURE_LOCK +#define CONFIG_ESP32C3_RTC_CLK_CAL_CYCLES CONFIG_RTC_CLK_CAL_CYCLES +#define CONFIG_ESP32C3_RTC_CLK_SRC_INT_RC CONFIG_RTC_CLK_SRC_INT_RC +#define CONFIG_ESP32C3_TIME_SYSCALL_USE_RTC_SYSTIMER CONFIG_NEWLIB_TIME_SYSCALL_USE_RTC_HRT +#define CONFIG_ESP32_APPTRACE_DEST_NONE CONFIG_APPTRACE_DEST_NONE +#define CONFIG_ESP32_APPTRACE_LOCK_ENABLE CONFIG_APPTRACE_LOCK_ENABLE +#define CONFIG_ESP32_ENABLE_COREDUMP_TO_NONE CONFIG_ESP_COREDUMP_ENABLE_TO_NONE +#define CONFIG_ESP32_PHY_CALIBRATION_AND_DATA_STORAGE CONFIG_ESP_PHY_CALIBRATION_AND_DATA_STORAGE +#define CONFIG_ESP32_PHY_MAX_TX_POWER CONFIG_ESP_PHY_MAX_TX_POWER +#define CONFIG_ESP32_PHY_MAX_WIFI_TX_POWER CONFIG_ESP_PHY_MAX_WIFI_TX_POWER +#define CONFIG_ESP32_PTHREAD_TASK_CORE_DEFAULT CONFIG_PTHREAD_TASK_CORE_DEFAULT +#define CONFIG_ESP32_PTHREAD_TASK_NAME_DEFAULT CONFIG_PTHREAD_TASK_NAME_DEFAULT +#define CONFIG_ESP32_PTHREAD_TASK_PRIO_DEFAULT CONFIG_PTHREAD_TASK_PRIO_DEFAULT +#define CONFIG_ESP32_PTHREAD_TASK_STACK_SIZE_DEFAULT CONFIG_PTHREAD_TASK_STACK_SIZE_DEFAULT +#define CONFIG_ESP32_WIFI_AMPDU_RX_ENABLED CONFIG_ESP_WIFI_AMPDU_RX_ENABLED +#define CONFIG_ESP32_WIFI_AMPDU_TX_ENABLED CONFIG_ESP_WIFI_AMPDU_TX_ENABLED +#define CONFIG_ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM CONFIG_ESP_WIFI_DYNAMIC_RX_BUFFER_NUM +#define CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER CONFIG_ESP_WIFI_DYNAMIC_TX_BUFFER +#define CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER_NUM CONFIG_ESP_WIFI_DYNAMIC_TX_BUFFER_NUM +#define CONFIG_ESP32_WIFI_ENABLED CONFIG_ESP_WIFI_ENABLED +#define CONFIG_ESP32_WIFI_ENABLE_WPA3_SAE CONFIG_ESP_WIFI_ENABLE_WPA3_SAE +#define CONFIG_ESP32_WIFI_IRAM_OPT CONFIG_ESP_WIFI_IRAM_OPT +#define CONFIG_ESP32_WIFI_MGMT_SBUF_NUM CONFIG_ESP_WIFI_MGMT_SBUF_NUM +#define CONFIG_ESP32_WIFI_NVS_ENABLED CONFIG_ESP_WIFI_NVS_ENABLED +#define CONFIG_ESP32_WIFI_RX_BA_WIN CONFIG_ESP_WIFI_RX_BA_WIN +#define CONFIG_ESP32_WIFI_RX_IRAM_OPT CONFIG_ESP_WIFI_RX_IRAM_OPT +#define CONFIG_ESP32_WIFI_SOFTAP_BEACON_MAX_LEN CONFIG_ESP_WIFI_SOFTAP_BEACON_MAX_LEN +#define CONFIG_ESP32_WIFI_STATIC_RX_BUFFER_NUM CONFIG_ESP_WIFI_STATIC_RX_BUFFER_NUM +#define CONFIG_ESP32_WIFI_SW_COEXIST_ENABLE CONFIG_ESP_COEX_SW_COEXIST_ENABLE +#define CONFIG_ESP32_WIFI_TX_BA_WIN CONFIG_ESP_WIFI_TX_BA_WIN +#define CONFIG_ESP32_WIFI_TX_BUFFER_TYPE CONFIG_ESP_WIFI_TX_BUFFER_TYPE +#define CONFIG_ESP_GRATUITOUS_ARP CONFIG_LWIP_ESP_GRATUITOUS_ARP +#define CONFIG_ESP_SYSTEM_PM_POWER_DOWN_CPU CONFIG_PM_POWER_DOWN_CPU_IN_LIGHT_SLEEP +#define CONFIG_ESP_TASK_WDT CONFIG_ESP_TASK_WDT_INIT +#define CONFIG_ESP_WIFI_SW_COEXIST_ENABLE CONFIG_ESP_COEX_SW_COEXIST_ENABLE +#define CONFIG_FLASHMODE_DIO CONFIG_ESPTOOLPY_FLASHMODE_DIO +#define CONFIG_GAP_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_GAP_TRACE_LEVEL +#define CONFIG_GAP_TRACE_LEVEL_WARNING CONFIG_BT_LOG_GAP_TRACE_LEVEL_WARNING +#define CONFIG_GARP_TMR_INTERVAL CONFIG_LWIP_GARP_TMR_INTERVAL +#define CONFIG_GATTC_ENABLE CONFIG_BT_GATTC_ENABLE +#define CONFIG_GATTS_ENABLE CONFIG_BT_GATTS_ENABLE +#define CONFIG_GATTS_SEND_SERVICE_CHANGE_AUTO CONFIG_BT_GATTS_SEND_SERVICE_CHANGE_AUTO +#define CONFIG_GATTS_SEND_SERVICE_CHANGE_MODE CONFIG_BT_GATTS_SEND_SERVICE_CHANGE_MODE +#define CONFIG_GATT_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_GATT_TRACE_LEVEL +#define CONFIG_GATT_TRACE_LEVEL_WARNING CONFIG_BT_LOG_GATT_TRACE_LEVEL_WARNING +#define CONFIG_HCI_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_HCI_TRACE_LEVEL +#define CONFIG_HCI_TRACE_LEVEL_WARNING CONFIG_BT_LOG_HCI_TRACE_LEVEL_WARNING +#define CONFIG_HID_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_HID_TRACE_LEVEL +#define CONFIG_HID_TRACE_LEVEL_WARNING CONFIG_BT_LOG_HID_TRACE_LEVEL_WARNING +#define CONFIG_INT_WDT CONFIG_ESP_INT_WDT +#define CONFIG_INT_WDT_TIMEOUT_MS CONFIG_ESP_INT_WDT_TIMEOUT_MS +#define CONFIG_IPC_TASK_STACK_SIZE CONFIG_ESP_IPC_TASK_STACK_SIZE +#define CONFIG_L2CAP_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_L2CAP_TRACE_LEVEL +#define CONFIG_L2CAP_TRACE_LEVEL_WARNING CONFIG_BT_LOG_L2CAP_TRACE_LEVEL_WARNING +#define CONFIG_LOG_BOOTLOADER_LEVEL CONFIG_BOOTLOADER_LOG_LEVEL +#define CONFIG_LOG_BOOTLOADER_LEVEL_INFO CONFIG_BOOTLOADER_LOG_LEVEL_INFO +#define CONFIG_MAIN_TASK_STACK_SIZE CONFIG_ESP_MAIN_TASK_STACK_SIZE +#define CONFIG_MCA_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_MCA_TRACE_LEVEL +#define CONFIG_MCA_TRACE_LEVEL_WARNING CONFIG_BT_LOG_MCA_TRACE_LEVEL_WARNING +#define CONFIG_MONITOR_BAUD CONFIG_ESPTOOLPY_MONITOR_BAUD +#define CONFIG_OPTIMIZATION_ASSERTIONS_ENABLED CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_ENABLE +#define CONFIG_OPTIMIZATION_ASSERTION_LEVEL CONFIG_COMPILER_OPTIMIZATION_ASSERTION_LEVEL +#define CONFIG_OPTIMIZATION_LEVEL_RELEASE CONFIG_COMPILER_OPTIMIZATION_SIZE +#define CONFIG_OSI_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_OSI_TRACE_LEVEL +#define CONFIG_OSI_TRACE_LEVEL_WARNING CONFIG_BT_LOG_OSI_TRACE_LEVEL_WARNING +#define CONFIG_PAN_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_PAN_TRACE_LEVEL +#define CONFIG_PAN_TRACE_LEVEL_WARNING CONFIG_BT_LOG_PAN_TRACE_LEVEL_WARNING +#define CONFIG_POST_EVENTS_FROM_IRAM_ISR CONFIG_ESP_EVENT_POST_FROM_IRAM_ISR +#define CONFIG_POST_EVENTS_FROM_ISR CONFIG_ESP_EVENT_POST_FROM_ISR +#define CONFIG_RFCOMM_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_RFCOMM_TRACE_LEVEL +#define CONFIG_RFCOMM_TRACE_LEVEL_WARNING CONFIG_BT_LOG_RFCOMM_TRACE_LEVEL_WARNING +#define CONFIG_SDP_TRACE_LEVEL_WARNING CONFIG_BT_LOG_SDP_TRACE_LEVEL_WARNING +#define CONFIG_SEMIHOSTFS_MAX_MOUNT_POINTS CONFIG_VFS_SEMIHOSTFS_MAX_MOUNT_POINTS +#define CONFIG_SMP_ENABLE CONFIG_BT_SMP_ENABLE +#define CONFIG_SMP_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_SMP_TRACE_LEVEL +#define CONFIG_SMP_TRACE_LEVEL_WARNING CONFIG_BT_LOG_SMP_TRACE_LEVEL_WARNING +#define CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ABORTS CONFIG_SPI_FLASH_DANGEROUS_WRITE_ABORTS +#define CONFIG_STACK_CHECK_NONE CONFIG_COMPILER_STACK_CHECK_MODE_NONE +#define CONFIG_SUPPORT_TERMIOS CONFIG_VFS_SUPPORT_TERMIOS +#define CONFIG_SUPPRESS_SELECT_DEBUG_OUTPUT CONFIG_VFS_SUPPRESS_SELECT_DEBUG_OUTPUT +#define CONFIG_SW_COEXIST_ENABLE CONFIG_ESP_COEX_SW_COEXIST_ENABLE +#define CONFIG_SYSTEM_EVENT_QUEUE_SIZE CONFIG_ESP_SYSTEM_EVENT_QUEUE_SIZE +#define CONFIG_SYSTEM_EVENT_TASK_STACK_SIZE CONFIG_ESP_SYSTEM_EVENT_TASK_STACK_SIZE +#define CONFIG_TASK_WDT CONFIG_ESP_TASK_WDT_INIT +#define CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU0 CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU0 +#define CONFIG_TASK_WDT_TIMEOUT_S CONFIG_ESP_TASK_WDT_TIMEOUT_S +#define CONFIG_TCPIP_RECVMBOX_SIZE CONFIG_LWIP_TCPIP_RECVMBOX_SIZE +#define CONFIG_TCPIP_TASK_AFFINITY CONFIG_LWIP_TCPIP_TASK_AFFINITY +#define CONFIG_TCPIP_TASK_AFFINITY_NO_AFFINITY CONFIG_LWIP_TCPIP_TASK_AFFINITY_NO_AFFINITY +#define CONFIG_TCPIP_TASK_STACK_SIZE CONFIG_LWIP_TCPIP_TASK_STACK_SIZE +#define CONFIG_TCP_MAXRTX CONFIG_LWIP_TCP_MAXRTX +#define CONFIG_TCP_MSL CONFIG_LWIP_TCP_MSL +#define CONFIG_TCP_MSS CONFIG_LWIP_TCP_MSS +#define CONFIG_TCP_OVERSIZE_MSS CONFIG_LWIP_TCP_OVERSIZE_MSS +#define CONFIG_TCP_QUEUE_OOSEQ CONFIG_LWIP_TCP_QUEUE_OOSEQ +#define CONFIG_TCP_RECVMBOX_SIZE CONFIG_LWIP_TCP_RECVMBOX_SIZE +#define CONFIG_TCP_SND_BUF_DEFAULT CONFIG_LWIP_TCP_SND_BUF_DEFAULT +#define CONFIG_TCP_SYNMAXRTX CONFIG_LWIP_TCP_SYNMAXRTX +#define CONFIG_TCP_WND_DEFAULT CONFIG_LWIP_TCP_WND_DEFAULT +#define CONFIG_TIMER_QUEUE_LENGTH CONFIG_FREERTOS_TIMER_QUEUE_LENGTH +#define CONFIG_TIMER_TASK_PRIORITY CONFIG_FREERTOS_TIMER_TASK_PRIORITY +#define CONFIG_TIMER_TASK_STACK_DEPTH CONFIG_FREERTOS_TIMER_TASK_STACK_DEPTH +#define CONFIG_TIMER_TASK_STACK_SIZE CONFIG_ESP_TIMER_TASK_STACK_SIZE +#define CONFIG_UDP_RECVMBOX_SIZE CONFIG_LWIP_UDP_RECVMBOX_SIZE +#define CONFIG_WPA_MBEDTLS_CRYPTO CONFIG_ESP_WIFI_MBEDTLS_CRYPTO diff --git a/espradio/blobs/headers/esp32c6/esp_bt.h b/espradio/blobs/headers/esp32c6/esp_bt.h new file mode 100644 index 000000000..a7747aaad --- /dev/null +++ b/espradio/blobs/headers/esp32c6/esp_bt.h @@ -0,0 +1,433 @@ +/* + * SPDX-FileCopyrightText: 2015-2023 Espressif Systems (Shanghai) CO LTD + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#ifndef __ESP_BT_H__ +#define __ESP_BT_H__ + +#include +#include +#include "esp_err.h" +#include "sdkconfig.h" + +#include "nimble/nimble_npl.h" +#include "hal/efuse_hal.h" + +#ifdef CONFIG_BT_LE_HCI_INTERFACE_USE_UART +#include "driver/uart.h" +#endif + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * @brief Bluetooth mode for controller enable/disable. + */ +typedef enum { + ESP_BT_MODE_IDLE = 0x00, /*!< Bluetooth is not running */ + ESP_BT_MODE_BLE = 0x01, /*!< Run BLE mode */ + ESP_BT_MODE_CLASSIC_BT = 0x02, /*!< Run Classic BT mode */ + ESP_BT_MODE_BTDM = 0x03, /*!< Run dual mode */ +} esp_bt_mode_t; + +/** + * @brief Bluetooth controller enable/disable/initialised/de-initialised status. + */ +typedef enum { + ESP_BT_CONTROLLER_STATUS_IDLE = 0, /*!< Controller is in idle state */ + ESP_BT_CONTROLLER_STATUS_INITED, /*!< Controller is in initialising state */ + ESP_BT_CONTROLLER_STATUS_ENABLED, /*!< Controller is in enabled state */ + ESP_BT_CONTROLLER_STATUS_NUM, /*!< Controller is in disabled state */ +} esp_bt_controller_status_t; + +/** + * @brief BLE tx power type + * ESP_BLE_PWR_TYPE_CONN_HDL0-8: for each connection, and only be set after connection completed. + * when disconnect, the correspond TX power is not effected. + * ESP_BLE_PWR_TYPE_ADV : for advertising/scan response. + * ESP_BLE_PWR_TYPE_SCAN : for scan. + * ESP_BLE_PWR_TYPE_DEFAULT : if each connection's TX power is not set, it will use this default value. + * if neither in scan mode nor in adv mode, it will use this default value. + * If none of power type is set, system will use ESP_PWR_LVL_P3 as default for ADV/SCAN/CONN0-9. + */ +typedef enum { + ESP_BLE_PWR_TYPE_CONN_HDL0 = 0, /*!< For connection handle 0 */ + ESP_BLE_PWR_TYPE_CONN_HDL1 = 1, /*!< For connection handle 1 */ + ESP_BLE_PWR_TYPE_CONN_HDL2 = 2, /*!< For connection handle 2 */ + ESP_BLE_PWR_TYPE_CONN_HDL3 = 3, /*!< For connection handle 3 */ + ESP_BLE_PWR_TYPE_CONN_HDL4 = 4, /*!< For connection handle 4 */ + ESP_BLE_PWR_TYPE_CONN_HDL5 = 5, /*!< For connection handle 5 */ + ESP_BLE_PWR_TYPE_CONN_HDL6 = 6, /*!< For connection handle 6 */ + ESP_BLE_PWR_TYPE_CONN_HDL7 = 7, /*!< For connection handle 7 */ + ESP_BLE_PWR_TYPE_CONN_HDL8 = 8, /*!< For connection handle 8 */ + ESP_BLE_PWR_TYPE_ADV = 9, /*!< For advertising */ + ESP_BLE_PWR_TYPE_SCAN = 10, /*!< For scan */ + ESP_BLE_PWR_TYPE_DEFAULT = 11, /*!< For default, if not set other, it will use default value */ + ESP_BLE_PWR_TYPE_NUM = 12, /*!< TYPE numbers */ +} esp_ble_power_type_t; + +/** + * @brief Bluetooth TX power level(index), it's just a index corresponding to power(dbm). + */ +typedef enum { + ESP_PWR_LVL_N15 = 3, /*!< Corresponding to -15dbm */ + ESP_PWR_LVL_N12 = 4, /*!< Corresponding to -12dbm */ + ESP_PWR_LVL_N9 = 5, /*!< Corresponding to -9dbm */ + ESP_PWR_LVL_N6 = 6, /*!< Corresponding to -6dbm */ + ESP_PWR_LVL_N3 = 7, /*!< Corresponding to -3dbm */ + ESP_PWR_LVL_N0 = 8, /*!< Corresponding to 0dbm */ + ESP_PWR_LVL_P3 = 9, /*!< Corresponding to +3dbm */ + ESP_PWR_LVL_P6 = 10, /*!< Corresponding to +6dbm */ + ESP_PWR_LVL_P9 = 11, /*!< Corresponding to +9dbm */ + ESP_PWR_LVL_P12 = 12, /*!< Corresponding to +12dbm */ + ESP_PWR_LVL_P15 = 13, /*!< Corresponding to +15dbm */ + ESP_PWR_LVL_P18 = 14, /*!< Corresponding to +18dbm */ + ESP_PWR_LVL_P20 = 15, /*!< Corresponding to +20dbm */ + ESP_PWR_LVL_INVALID = 0xFF, /*!< Indicates an invalid value */ +} esp_power_level_t; + +/** + * @brief The enhanced type of which tx power, could set Advertising/Connection/Default and etc. + */ +typedef enum { + ESP_BLE_ENHANCED_PWR_TYPE_DEFAULT = 0, + ESP_BLE_ENHANCED_PWR_TYPE_ADV, + ESP_BLE_ENHANCED_PWR_TYPE_SCAN, + ESP_BLE_ENHANCED_PWR_TYPE_INIT, + ESP_BLE_ENHANCED_PWR_TYPE_CONN, + ESP_BLE_ENHANCED_PWR_TYPE_MAX, +} esp_ble_enhanced_power_type_t; + +/** + * @brief Select buffers +*/ +typedef enum { + ESP_BLE_LOG_BUF_HCI = 0x02, + ESP_BLE_LOG_BUF_CONTROLLER = 0x05, +} esp_ble_log_buf_t; + +/** + * @brief Address type and address value. + */ +typedef struct { + uint8_t type; /*!< Type of the Bluetooth address (public, random, etc.) */ + uint8_t val[6]; /*!< Array containing the 6-byte Bluetooth address value */ +} esp_ble_addr_t; + +/** + * @brief Set BLE TX power + * Connection Tx power should only be set after connection created. + * @param power_type : The type of which tx power, could set Advertising/Connection/Default and etc + * @param power_level: Power level(index) corresponding to absolute value(dbm) + * @return ESP_OK - success, other - failed + */ +esp_err_t esp_ble_tx_power_set(esp_ble_power_type_t power_type, esp_power_level_t power_level); + +/** + * @brief Get BLE TX power + * Connection Tx power should only be get after connection created. + * @param power_type : The type of which tx power, could set Advertising/Connection/Default and etc + * @return >= 0 - Power level, < 0 - Invalid + */ +esp_power_level_t esp_ble_tx_power_get(esp_ble_power_type_t power_type); + +/** + * @brief ENHANCED API for Setting BLE TX power + * Connection Tx power should only be set after connection created. + * @param power_type : The enhanced type of which tx power, could set Advertising/Connection/Default and etc. + * @param handle : The handle of Advertising or Connection and the value 0 for other enhanced power types. + * @param power_level: Power level(index) corresponding to absolute value(dbm) + * @return ESP_OK - success, other - failed + */ +esp_err_t esp_ble_tx_power_set_enhanced(esp_ble_enhanced_power_type_t power_type, uint16_t handle, esp_power_level_t power_level); + +/** + * @brief ENHANCED API of Getting BLE TX power + * Connection Tx power should only be get after connection created. + * @param power_type : The enhanced type of which tx power, could set Advertising/Connection/Default and etc + * @param handle : The handle of Advertising or Connection and the value 0 for other enhanced power types. + * @return >= 0 - Power level, < 0 - Invalid + */ +esp_power_level_t esp_ble_tx_power_get_enhanced(esp_ble_enhanced_power_type_t power_type, uint16_t handle); + +#define CONFIG_VERSION 0x20231124 +#define CONFIG_MAGIC 0x5A5AA5A5 + +/** + * @brief Controller config options, depend on config mask. + * Config mask indicate which functions enabled, this means + * some options or parameters of some functions enabled by config mask. + */ +typedef struct { + uint32_t config_version; /*!< Configuration version */ + uint16_t ble_ll_resolv_list_size; /*!< Size of the BLE resolving list */ + uint16_t ble_hci_evt_hi_buf_count; /*!< Number of high priority HCI event buffers */ + uint16_t ble_hci_evt_lo_buf_count; /*!< Number of low priority HCI event buffers */ + uint8_t ble_ll_sync_list_cnt; /*!< Number of entries in the BLE sync list */ + uint8_t ble_ll_sync_cnt; /*!< Number of BLE sync instances */ + uint16_t ble_ll_rsp_dup_list_count; /*!< Size of the BLE response duplicate list */ + uint16_t ble_ll_adv_dup_list_count; /*!< Size of the BLE advertising duplicate list */ + uint8_t ble_ll_tx_pwr_dbm; /*!< BLE transmit power in dBm */ + uint64_t rtc_freq; /*!< RTC (Real-Time Clock) frequency */ + uint16_t ble_ll_sca; /*!< BLE sleep clock accuracy in ppm */ + uint8_t ble_ll_scan_phy_number; /*!< Number of BLE scanning physical layers */ + uint16_t ble_ll_conn_def_auth_pyld_tmo; /*!< BLE connection default authentication payload timeout */ + uint8_t ble_ll_jitter_usecs; /*!< BLE link layer jitter in microseconds */ + uint16_t ble_ll_sched_max_adv_pdu_usecs; /*!< BLE scheduler maximum advertising PDU duration in microseconds */ + uint16_t ble_ll_sched_direct_adv_max_usecs; /*!< BLE scheduler maximum direct advertising duration in microseconds */ + uint16_t ble_ll_sched_adv_max_usecs; /*!< BLE scheduler maximum advertising duration in microseconds */ + uint16_t ble_scan_rsp_data_max_len; /*!< Maximum length of BLE scan response data */ + uint8_t ble_ll_cfg_num_hci_cmd_pkts; /*!< Number of BLE LL configuration HCI command packets */ + uint32_t ble_ll_ctrl_proc_timeout_ms; /*!< BLE link layer controller process timeout in milliseconds */ + uint16_t nimble_max_connections; /*!< Maximum number of concurrent BLE connections */ + uint8_t ble_whitelist_size; /*!< Size of the BLE whitelist */ + uint16_t ble_acl_buf_size; /*!< Size of the BLE ACL data buffer */ + uint16_t ble_acl_buf_count; /*!< Number of BLE ACL data buffers */ + uint16_t ble_hci_evt_buf_size; /*!< Size of the BLE HCI event buffer */ + uint16_t ble_multi_adv_instances; /*!< Number of BLE multi-advertising instances */ + uint16_t ble_ext_adv_max_size; /*!< Maximum size of BLE extended advertising data */ + uint16_t controller_task_stack_size; /*!< Controller task stack size */ + uint8_t controller_task_prio; /*!< Controller task priority */ + uint8_t controller_run_cpu; /*!< CPU core on which the controller runs */ + uint8_t enable_qa_test; /*!< Enable quality assurance (QA) testing */ + uint8_t enable_bqb_test; /*!< Enable Bluetooth Qualification Test (BQB) testing */ + uint8_t enable_uart_hci; /*!< Enable UART HCI (Host Controller Interface) */ + uint8_t ble_hci_uart_port; /*!< UART port number for Bluetooth HCI */ + uint32_t ble_hci_uart_baud; /*!< Baud rate for Bluetooth HCI UART */ + uint8_t ble_hci_uart_data_bits; /*!< Number of data bits for Bluetooth HCI UART */ + uint8_t ble_hci_uart_stop_bits; /*!< Number of stop bits for Bluetooth HCI UART */ + uint8_t ble_hci_uart_flow_ctrl; /*!< Flow control settings for Bluetooth HCI UART */ + uint8_t ble_hci_uart_uart_parity; /*!< Parity settings for Bluetooth HCI UART */ + uint8_t enable_tx_cca; /*!< Enable Transmit Clear Channel Assessment (TX CCA) */ + uint8_t cca_rssi_thresh; /*!< RSSI threshold for Transmit Clear Channel Assessment (CCA) */ + uint8_t sleep_en; /*!< Enable sleep mode */ + uint8_t coex_phy_coded_tx_rx_time_limit; /*!< PHY coded transmission and reception time limit for coexistence */ + uint8_t dis_scan_backoff; /*!< Disable scan backoff */ + uint8_t ble_scan_classify_filter_enable; /*!< Enable BLE scan classify filter */ + uint8_t cca_drop_mode; /*!< CCA drop mode */ + int8_t cca_low_tx_pwr; /*!< CCA low transmit power */ + uint8_t main_xtal_freq; /*!< Main crystal frequency */ + uint32_t version_num; /*!< Controller configuration version number */ + uint8_t cpu_freq_mhz; /*!< CPU frequency in megahertz (MHz) */ + uint8_t ignore_wl_for_direct_adv; /*!< Ignore the whitelist for direct advertising */ + uint8_t enable_pcl; /*!< Enable power control */ + uint8_t csa2_select; /*!< Select CSA#2*/ + uint32_t config_magic; /*!< Magic number for configuration validation */ +} esp_bt_controller_config_t; + +#define BT_CONTROLLER_INIT_CONFIG_DEFAULT() { \ + .config_version = CONFIG_VERSION, \ + .ble_ll_resolv_list_size = CONFIG_BT_LE_LL_RESOLV_LIST_SIZE, \ + .ble_hci_evt_hi_buf_count = DEFAULT_BT_LE_HCI_EVT_HI_BUF_COUNT, \ + .ble_hci_evt_lo_buf_count = DEFAULT_BT_LE_HCI_EVT_LO_BUF_COUNT, \ + .ble_ll_sync_list_cnt = DEFAULT_BT_LE_MAX_PERIODIC_ADVERTISER_LIST, \ + .ble_ll_sync_cnt = DEFAULT_BT_LE_MAX_PERIODIC_SYNCS, \ + .ble_ll_rsp_dup_list_count = CONFIG_BT_LE_LL_DUP_SCAN_LIST_COUNT, \ + .ble_ll_adv_dup_list_count = CONFIG_BT_LE_LL_DUP_SCAN_LIST_COUNT, \ + .ble_ll_tx_pwr_dbm = BLE_LL_TX_PWR_DBM_N, \ + .rtc_freq = RTC_FREQ_N, \ + .ble_ll_sca = CONFIG_BT_LE_LL_SCA, \ + .ble_ll_scan_phy_number = BLE_LL_SCAN_PHY_NUMBER_N, \ + .ble_ll_conn_def_auth_pyld_tmo = BLE_LL_CONN_DEF_AUTH_PYLD_TMO_N, \ + .ble_ll_jitter_usecs = BLE_LL_JITTER_USECS_N, \ + .ble_ll_sched_max_adv_pdu_usecs = BLE_LL_SCHED_MAX_ADV_PDU_USECS_N, \ + .ble_ll_sched_direct_adv_max_usecs = BLE_LL_SCHED_DIRECT_ADV_MAX_USECS_N, \ + .ble_ll_sched_adv_max_usecs = BLE_LL_SCHED_ADV_MAX_USECS_N, \ + .ble_scan_rsp_data_max_len = DEFAULT_BT_LE_SCAN_RSP_DATA_MAX_LEN_N, \ + .ble_ll_cfg_num_hci_cmd_pkts = BLE_LL_CFG_NUM_HCI_CMD_PKTS_N, \ + .ble_ll_ctrl_proc_timeout_ms = BLE_LL_CTRL_PROC_TIMEOUT_MS_N, \ + .nimble_max_connections = DEFAULT_BT_LE_MAX_CONNECTIONS, \ + .ble_whitelist_size = DEFAULT_BT_NIMBLE_WHITELIST_SIZE, \ + .ble_acl_buf_size = DEFAULT_BT_LE_ACL_BUF_SIZE, \ + .ble_acl_buf_count = DEFAULT_BT_LE_ACL_BUF_COUNT, \ + .ble_hci_evt_buf_size = DEFAULT_BT_LE_HCI_EVT_BUF_SIZE, \ + .ble_multi_adv_instances = DEFAULT_BT_LE_MAX_EXT_ADV_INSTANCES, \ + .ble_ext_adv_max_size = DEFAULT_BT_LE_EXT_ADV_MAX_SIZE, \ + .controller_task_stack_size = NIMBLE_LL_STACK_SIZE, \ + .controller_task_prio = ESP_TASK_BT_CONTROLLER_PRIO, \ + .controller_run_cpu = 0, \ + .enable_qa_test = RUN_QA_TEST, \ + .enable_bqb_test = RUN_BQB_TEST, \ + .enable_uart_hci = HCI_UART_EN, \ + .ble_hci_uart_port = DEFAULT_BT_LE_HCI_UART_PORT, \ + .ble_hci_uart_baud = DEFAULT_BT_LE_HCI_UART_BAUD, \ + .ble_hci_uart_data_bits = DEFAULT_BT_LE_HCI_UART_DATA_BITS, \ + .ble_hci_uart_stop_bits = DEFAULT_BT_LE_HCI_UART_STOP_BITS, \ + .ble_hci_uart_flow_ctrl = DEFAULT_BT_LE_HCI_UART_FLOW_CTRL, \ + .ble_hci_uart_uart_parity = DEFAULT_BT_LE_HCI_UART_PARITY, \ + .enable_tx_cca = DEFAULT_BT_LE_TX_CCA_ENABLED, \ + .cca_rssi_thresh = 256 - DEFAULT_BT_LE_CCA_RSSI_THRESH, \ + .sleep_en = NIMBLE_SLEEP_ENABLE, \ + .coex_phy_coded_tx_rx_time_limit = DEFAULT_BT_LE_COEX_PHY_CODED_TX_RX_TLIM_EFF, \ + .dis_scan_backoff = NIMBLE_DISABLE_SCAN_BACKOFF, \ + .ble_scan_classify_filter_enable = 1, \ + .main_xtal_freq = CONFIG_XTAL_FREQ, \ + .version_num = efuse_hal_chip_revision(), \ + .cpu_freq_mhz = CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ, \ + .ignore_wl_for_direct_adv = 0, \ + .enable_pcl = DEFAULT_BT_LE_POWER_CONTROL_ENABLED, \ + .csa2_select = DEFAULT_BT_LE_50_FEATURE_SUPPORT, \ + .config_magic = CONFIG_MAGIC, \ +} + +/** + * @brief Initialize BT controller to allocate task and other resource. + * This function should be called only once, before any other BT functions are called. + * @param cfg: Initial configuration of BT controller. + * @return ESP_OK - success, other - failed + */ +esp_err_t esp_bt_controller_init(esp_bt_controller_config_t *cfg); + +/** + * @brief Get BT controller is initialised/de-initialised/enabled/disabled + * @return status value + */ +esp_bt_controller_status_t esp_bt_controller_get_status(void); + +/** + * @brief Get BLE TX power + * Connection Tx power should only be get after connection created. + * @param power_type : The type of which tx power, could set Advertising/Connection/Default and etc + * @return >= 0 - Power level, < 0 - Invalid + */ +esp_power_level_t esp_ble_tx_power_get(esp_ble_power_type_t power_type); + +/** + * @brief De-initialize BT controller to free resource and delete task. + * You should stop advertising and scanning, as well as + * disconnect all existing connections before de-initializing BT controller. + * + * This function should be called only once, after any other BT functions are called. + * This function is not whole completed, esp_bt_controller_init cannot called after this function. + * @return ESP_OK - success, other - failed + */ +esp_err_t esp_bt_controller_deinit(void); + +/** + * @brief Enable BT controller. + * Due to a known issue, you cannot call esp_bt_controller_enable() a second time + * to change the controller mode dynamically. To change controller mode, call + * esp_bt_controller_disable() and then call esp_bt_controller_enable() with the new mode. + * @param mode : the mode(BLE/BT/BTDM) to enable. For compatible of API, retain this argument. + * @return ESP_OK - success, other - failed + */ +esp_err_t esp_bt_controller_enable(esp_bt_mode_t mode); + +/** + * @brief Disable BT controller + * @return ESP_OK - success, other - failed + */ +esp_err_t esp_bt_controller_disable(void); + +/** @brief esp_vhci_host_callback + * used for vhci call host function to notify what host need to do + */ +typedef struct esp_vhci_host_callback { + void (*notify_host_send_available)(void); /*!< callback used to notify that the host can send packet to controller */ + int (*notify_host_recv)(uint8_t *data, uint16_t len); /*!< callback used to notify that the controller has a packet to send to the host*/ +} esp_vhci_host_callback_t; + +/** @brief esp_vhci_host_check_send_available + * used for check actively if the host can send packet to controller or not. + * @return true for ready to send, false means cannot send packet + */ +bool esp_vhci_host_check_send_available(void); + +/** @brief esp_vhci_host_send_packet + * host send packet to controller + * + * Should not call this function from within a critical section + * or when the scheduler is suspended. + * + * @param data the packet point + * @param len the packet length + */ +void esp_vhci_host_send_packet(uint8_t *data, uint16_t len); + +/** @brief esp_vhci_host_register_callback + * register the vhci reference callback + * struct defined by vhci_host_callback structure. + * @param callback esp_vhci_host_callback type variable + * @return ESP_OK - success, ESP_FAIL - failed + */ +esp_err_t esp_vhci_host_register_callback(const esp_vhci_host_callback_t *callback); + +/** @brief esp_bt_controller_mem_release + * release the controller memory as per the mode + * + * This function releases the BSS, data and other sections of the controller to heap. The total size is about 70k bytes. + * + * esp_bt_controller_mem_release(mode) should be called only before esp_bt_controller_init() + * or after esp_bt_controller_deinit(). + * + * Note that once BT controller memory is released, the process cannot be reversed. It means you cannot use the bluetooth + * mode which you have released by this function. + * + * If your firmware will later upgrade the Bluetooth controller mode (BLE -> BT Classic or disabled -> enabled) + * then do not call this function. + * + * If the app calls esp_bt_controller_enable(ESP_BT_MODE_BLE) to use BLE only then it is safe to call + * esp_bt_controller_mem_release(ESP_BT_MODE_CLASSIC_BT) at initialization time to free unused BT Classic memory. + * + * If the mode is ESP_BT_MODE_BTDM, then it may be useful to call API esp_bt_mem_release(ESP_BT_MODE_BTDM) instead, + * which internally calls esp_bt_controller_mem_release(ESP_BT_MODE_BTDM) and additionally releases the BSS and data + * consumed by the BT/BLE host stack to heap. For more details about usage please refer to the documentation of + * esp_bt_mem_release() function + * + * @param mode : the mode want to release memory + * @return ESP_OK - success, other - failed + */ +esp_err_t esp_bt_controller_mem_release(esp_bt_mode_t mode); + +/** @brief esp_bt_mem_release + * release controller memory and BSS and data section of the BT/BLE host stack as per the mode + * + * This function first releases controller memory by internally calling esp_bt_controller_mem_release(). + * Additionally, if the mode is set to ESP_BT_MODE_BTDM, it also releases the BSS and data consumed by the BT/BLE host stack to heap + * + * Note that once BT memory is released, the process cannot be reversed. It means you cannot use the bluetooth + * mode which you have released by this function. + * + * If your firmware will later upgrade the Bluetooth controller mode (BLE -> BT Classic or disabled -> enabled) + * then do not call this function. + * + * If you never intend to use bluetooth in a current boot-up cycle, you can call esp_bt_mem_release(ESP_BT_MODE_BTDM) + * before esp_bt_controller_init or after esp_bt_controller_deinit. + * + * For example, if a user only uses bluetooth for setting the WiFi configuration, and does not use bluetooth in the rest of the product operation". + * In such cases, after receiving the WiFi configuration, you can disable/deinit bluetooth and release its memory. + * Below is the sequence of APIs to be called for such scenarios: + * + * esp_bluedroid_disable(); + * esp_bluedroid_deinit(); + * esp_bt_controller_disable(); + * esp_bt_controller_deinit(); + * esp_bt_mem_release(ESP_BT_MODE_BTDM); + * + * @param mode : the mode whose memory is to be released + * @return ESP_OK - success, other - failed + */ +esp_err_t esp_bt_mem_release(esp_bt_mode_t mode); + +/** + * @brief Returns random static address or -1 if not present. + * @return ESP_OK - success, other - failed + */ +extern int esp_ble_hw_get_static_addr(esp_ble_addr_t *addr); + +#if CONFIG_BT_LE_CONTROLLER_LOG_ENABLED +/** + * @brief dump all log information cached in buffers. + * @param output : true for log dump, false will take no effect + */ +void esp_ble_controller_log_dump_all(bool output); +#endif // CONFIG_BT_LE_CONTROLLER_LOG_ENABLED + +#ifdef __cplusplus +} +#endif + +#endif /* __ESP_BT_H__ */ diff --git a/espradio/blobs/headers/esp32c6/phy_init_data.h b/espradio/blobs/headers/esp32c6/phy_init_data.h new file mode 100644 index 000000000..aa6e9b403 --- /dev/null +++ b/espradio/blobs/headers/esp32c6/phy_init_data.h @@ -0,0 +1,199 @@ +/* + * SPDX-FileCopyrightText: 2016-2022 Espressif Systems (Shanghai) CO LTD + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#ifndef PHY_INIT_DATA_H +#define PHY_INIT_DATA_H /* don't use #pragma once here, we compile this file sometimes */ +#include "esp_phy_init.h" +#include "sdkconfig.h" + +#ifdef __cplusplus +extern "C" { +#endif + +// constrain a value between 'low' and 'high', inclusive +#define LIMIT(val, low, high) ((val < low) ? low : (val > high) ? high : val) + +#define PHY_INIT_MAGIC "PHYINIT" + +// define the lowest tx power as LOWEST_PHY_TX_POWER +#define PHY_TX_POWER_LOWEST LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 52) +#define PHY_TX_POWER_OFFSET 2 +#define PHY_TX_POWER_NUM 14 + +#if CONFIG_ESP_PHY_MULTIPLE_INIT_DATA_BIN +#define PHY_CRC_ALGORITHM 1 +#define PHY_COUNTRY_CODE_LEN 2 +#define PHY_INIT_DATA_TYPE_OFFSET 126 +#define PHY_SUPPORT_MULTIPLE_BIN_OFFSET 125 +#endif + + +static const char __attribute__((section(".rodata"))) phy_init_magic_pre[] = PHY_INIT_MAGIC; + +/** + * @brief Structure containing default recommended PHY initialization parameters. + */ +static const esp_phy_init_data_t phy_init_data= { { + 0x01, + 0x00, + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x54), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x54), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x50), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x50), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x50), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x4c), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x4c), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x4c), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x4c), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x48), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x44), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x3C), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x3C), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x3C), + 0x00, + 0x00, + 0x00, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0x70 +} }; + +static const char __attribute__((section(".rodata"))) phy_init_magic_post[] = PHY_INIT_MAGIC; + +#if CONFIG_ESP_PHY_MULTIPLE_INIT_DATA_BIN +/** + * @brief PHY init data control infomation structure + */ +typedef struct { + uint8_t control_info_checksum[4]; /*!< 4-byte control infomation checksum */ + uint8_t multiple_bin_checksum[4]; /*!< 4-byte multiple bin checksum */ + uint8_t check_algorithm; /*!< check algorithm */ + uint8_t version; /*!< PHY init data bin version */ + uint8_t number; /*!< PHY init data bin number */ + uint8_t length[2]; /*!< Length of each PHY init data bin */ + uint8_t reserved[19]; /*!< 19-byte reserved */ +} __attribute__ ((packed)) phy_control_info_data_t; + +/** + * @brief Country corresponds to PHY init data type structure + */ +typedef struct { + char cc[PHY_COUNTRY_CODE_LEN]; + uint8_t type; +} phy_country_to_bin_type_t; +#endif + +#ifdef __cplusplus +} +#endif + +#endif /* PHY_INIT_DATA_H */ diff --git a/espradio/blobs/headers/esp32c6/sdkconfig.h b/espradio/blobs/headers/esp32c6/sdkconfig.h new file mode 100644 index 000000000..a04dedbdd --- /dev/null +++ b/espradio/blobs/headers/esp32c6/sdkconfig.h @@ -0,0 +1,849 @@ +/* + * Automatically generated file. DO NOT EDIT. + * Espressif IoT Development Framework (ESP-IDF) 5.1.2 Configuration Header + */ +#pragma once +#define CONFIG_SOC_ADC_SUPPORTED 1 +#define CONFIG_SOC_DEDICATED_GPIO_SUPPORTED 1 +#define CONFIG_SOC_UART_SUPPORTED 1 +#define CONFIG_SOC_GDMA_SUPPORTED 1 +#define CONFIG_SOC_GPTIMER_SUPPORTED 1 +#define CONFIG_SOC_PCNT_SUPPORTED 1 +#define CONFIG_SOC_MCPWM_SUPPORTED 1 +#define CONFIG_SOC_TWAI_SUPPORTED 1 +#define CONFIG_SOC_ETM_SUPPORTED 1 +#define CONFIG_SOC_PARLIO_SUPPORTED 1 +#define CONFIG_SOC_BT_SUPPORTED 1 +#define CONFIG_SOC_IEEE802154_SUPPORTED 1 +#define CONFIG_SOC_ASYNC_MEMCPY_SUPPORTED 1 +#define CONFIG_SOC_USB_SERIAL_JTAG_SUPPORTED 1 +#define CONFIG_SOC_TEMP_SENSOR_SUPPORTED 1 +#define CONFIG_SOC_WIFI_SUPPORTED 1 +#define CONFIG_SOC_SUPPORTS_SECURE_DL_MODE 1 +#define CONFIG_SOC_ULP_SUPPORTED 1 +#define CONFIG_SOC_LP_CORE_SUPPORTED 1 +#define CONFIG_SOC_EFUSE_KEY_PURPOSE_FIELD 1 +#define CONFIG_SOC_RTC_FAST_MEM_SUPPORTED 1 +#define CONFIG_SOC_RTC_MEM_SUPPORTED 1 +#define CONFIG_SOC_I2S_SUPPORTED 1 +#define CONFIG_SOC_RMT_SUPPORTED 1 +#define CONFIG_SOC_SDM_SUPPORTED 1 +#define CONFIG_SOC_GPSPI_SUPPORTED 1 +#define CONFIG_SOC_LEDC_SUPPORTED 1 +#define CONFIG_SOC_I2C_SUPPORTED 1 +#define CONFIG_SOC_SYSTIMER_SUPPORTED 1 +#define CONFIG_SOC_SUPPORT_COEXISTENCE 1 +#define CONFIG_SOC_AES_SUPPORTED 1 +#define CONFIG_SOC_MPI_SUPPORTED 1 +#define CONFIG_SOC_SHA_SUPPORTED 1 +#define CONFIG_SOC_HMAC_SUPPORTED 1 +#define CONFIG_SOC_DIG_SIGN_SUPPORTED 1 +#define CONFIG_SOC_ECC_SUPPORTED 1 +#define CONFIG_SOC_FLASH_ENC_SUPPORTED 1 +#define CONFIG_SOC_SECURE_BOOT_SUPPORTED 1 +#define CONFIG_SOC_SDIO_SLAVE_SUPPORTED 1 +#define CONFIG_SOC_BOD_SUPPORTED 1 +#define CONFIG_SOC_APM_SUPPORTED 1 +#define CONFIG_SOC_PMU_SUPPORTED 1 +#define CONFIG_SOC_PAU_SUPPORTED 1 +#define CONFIG_SOC_LP_TIMER_SUPPORTED 1 +#define CONFIG_SOC_LP_AON_SUPPORTED 1 +#define CONFIG_SOC_LP_I2C_SUPPORTED 1 +#define CONFIG_SOC_XTAL_SUPPORT_40M 1 +#define CONFIG_SOC_AES_SUPPORT_DMA 1 +#define CONFIG_SOC_AES_GDMA 1 +#define CONFIG_SOC_AES_SUPPORT_AES_128 1 +#define CONFIG_SOC_AES_SUPPORT_AES_256 1 +#define CONFIG_SOC_ADC_DIG_CTRL_SUPPORTED 1 +#define CONFIG_SOC_ADC_DIG_IIR_FILTER_SUPPORTED 1 +#define CONFIG_SOC_ADC_MONITOR_SUPPORTED 1 +#define CONFIG_SOC_ADC_DMA_SUPPORTED 1 +#define CONFIG_SOC_ADC_PERIPH_NUM 1 +#define CONFIG_SOC_ADC_MAX_CHANNEL_NUM 7 +#define CONFIG_SOC_ADC_ATTEN_NUM 4 +#define CONFIG_SOC_ADC_DIGI_CONTROLLER_NUM 1 +#define CONFIG_SOC_ADC_PATT_LEN_MAX 8 +#define CONFIG_SOC_ADC_DIGI_MAX_BITWIDTH 12 +#define CONFIG_SOC_ADC_DIGI_MIN_BITWIDTH 12 +#define CONFIG_SOC_ADC_DIGI_IIR_FILTER_NUM 2 +#define CONFIG_SOC_ADC_DIGI_MONITOR_NUM 2 +#define CONFIG_SOC_ADC_DIGI_RESULT_BYTES 4 +#define CONFIG_SOC_ADC_DIGI_DATA_BYTES_PER_CONV 4 +#define CONFIG_SOC_ADC_SAMPLE_FREQ_THRES_HIGH 83333 +#define CONFIG_SOC_ADC_SAMPLE_FREQ_THRES_LOW 611 +#define CONFIG_SOC_ADC_RTC_MIN_BITWIDTH 12 +#define CONFIG_SOC_ADC_RTC_MAX_BITWIDTH 12 +#define CONFIG_SOC_ADC_CALIBRATION_V1_SUPPORTED 1 +#define CONFIG_SOC_ADC_SELF_HW_CALI_SUPPORTED 1 +#define CONFIG_SOC_ADC_CALIB_CHAN_COMPENS_SUPPORTED 1 +#define CONFIG_SOC_ADC_TEMPERATURE_SHARE_INTR 1 +#define CONFIG_SOC_BROWNOUT_RESET_SUPPORTED 1 +#define CONFIG_SOC_SHARED_IDCACHE_SUPPORTED 1 +#define CONFIG_SOC_CACHE_FREEZE_SUPPORTED 1 +#define CONFIG_SOC_CPU_CORES_NUM 1 +#define CONFIG_SOC_CPU_INTR_NUM 32 +#define CONFIG_SOC_CPU_HAS_FLEXIBLE_INTC 1 +#define CONFIG_SOC_INT_PLIC_SUPPORTED 1 +#define CONFIG_SOC_CPU_BREAKPOINTS_NUM 4 +#define CONFIG_SOC_CPU_WATCHPOINTS_NUM 4 +#define CONFIG_SOC_CPU_WATCHPOINT_MAX_REGION_SIZE 0x80000000 +#define CONFIG_SOC_CPU_HAS_PMA 1 +#define CONFIG_SOC_CPU_IDRAM_SPLIT_USING_PMP 1 +#define CONFIG_SOC_DS_SIGNATURE_MAX_BIT_LEN 3072 +#define CONFIG_SOC_DS_KEY_PARAM_MD_IV_LENGTH 16 +#define CONFIG_SOC_DS_KEY_CHECK_MAX_WAIT_US 1100 +#define CONFIG_SOC_GDMA_GROUPS 1 +#define CONFIG_SOC_GDMA_PAIRS_PER_GROUP 3 +#define CONFIG_SOC_GDMA_SUPPORT_ETM 1 +#define CONFIG_SOC_ETM_GROUPS 1 +#define CONFIG_SOC_ETM_CHANNELS_PER_GROUP 50 +#define CONFIG_SOC_GPIO_PORT 1 +#define CONFIG_SOC_GPIO_PIN_COUNT 31 +#define CONFIG_SOC_GPIO_SUPPORT_PIN_GLITCH_FILTER 1 +#define CONFIG_SOC_GPIO_FLEX_GLITCH_FILTER_NUM 8 +#define CONFIG_SOC_GPIO_SUPPORT_ETM 1 +#define CONFIG_SOC_GPIO_ETM_EVENTS_PER_GROUP 8 +#define CONFIG_SOC_GPIO_ETM_TASKS_PER_GROUP 8 +#define CONFIG_SOC_GPIO_SUPPORT_RTC_INDEPENDENT 1 +#define CONFIG_SOC_GPIO_SUPPORT_DEEPSLEEP_WAKEUP 1 +#define CONFIG_SOC_GPIO_DEEP_SLEEP_WAKE_VALID_GPIO_MASK 0 +#define CONFIG_SOC_GPIO_VALID_DIGITAL_IO_PAD_MASK 0x000000007FFFFF00 +#define CONFIG_SOC_GPIO_SUPPORT_FORCE_HOLD 1 +#define CONFIG_SOC_GPIO_SUPPORT_HOLD_SINGLE_IO_IN_DSLP 1 +#define CONFIG_SOC_RTCIO_PIN_COUNT 8 +#define CONFIG_SOC_RTCIO_INPUT_OUTPUT_SUPPORTED 1 +#define CONFIG_SOC_RTCIO_HOLD_SUPPORTED 1 +#define CONFIG_SOC_RTCIO_WAKE_SUPPORTED 1 +#define CONFIG_SOC_DEDIC_GPIO_OUT_CHANNELS_NUM 8 +#define CONFIG_SOC_DEDIC_GPIO_IN_CHANNELS_NUM 8 +#define CONFIG_SOC_DEDIC_PERIPH_ALWAYS_ENABLE 1 +#define CONFIG_SOC_I2C_NUM 1 +#define CONFIG_SOC_I2C_FIFO_LEN 32 +#define CONFIG_SOC_I2C_CMD_REG_NUM 8 +#define CONFIG_SOC_I2C_SUPPORT_SLAVE 1 +#define CONFIG_SOC_I2C_SUPPORT_HW_CLR_BUS 1 +#define CONFIG_SOC_I2C_SUPPORT_XTAL 1 +#define CONFIG_SOC_I2C_SUPPORT_RTC 1 +#define CONFIG_SOC_LP_I2C_NUM 1 +#define CONFIG_SOC_LP_I2C_FIFO_LEN 16 +#define CONFIG_SOC_I2S_NUM 1 +#define CONFIG_SOC_I2S_HW_VERSION_2 1 +#define CONFIG_SOC_I2S_SUPPORTS_XTAL 1 +#define CONFIG_SOC_I2S_SUPPORTS_PLL_F160M 1 +#define CONFIG_SOC_I2S_SUPPORTS_PCM 1 +#define CONFIG_SOC_I2S_SUPPORTS_PDM 1 +#define CONFIG_SOC_I2S_SUPPORTS_PDM_TX 1 +#define CONFIG_SOC_I2S_PDM_MAX_TX_LINES 2 +#define CONFIG_SOC_I2S_SUPPORTS_TDM 1 +#define CONFIG_SOC_LEDC_SUPPORT_PLL_DIV_CLOCK 1 +#define CONFIG_SOC_LEDC_SUPPORT_XTAL_CLOCK 1 +#define CONFIG_SOC_LEDC_CHANNEL_NUM 6 +#define CONFIG_SOC_LEDC_TIMER_BIT_WIDTH 20 +#define CONFIG_SOC_LEDC_SUPPORT_FADE_STOP 1 +#define CONFIG_SOC_LEDC_GAMMA_CURVE_FADE_SUPPORTED 1 +#define CONFIG_SOC_LEDC_GAMMA_CURVE_FADE_RANGE_MAX 16 +#define CONFIG_SOC_LEDC_FADE_PARAMS_BIT_WIDTH 10 +#define CONFIG_SOC_MMU_PAGE_SIZE_CONFIGURABLE 1 +#define CONFIG_SOC_MMU_PERIPH_NUM 1 +#define CONFIG_SOC_MMU_LINEAR_ADDRESS_REGION_NUM 1 +#define CONFIG_SOC_MMU_DI_VADDR_SHARED 1 +#define CONFIG_SOC_MPU_MIN_REGION_SIZE 0x20000000 +#define CONFIG_SOC_MPU_REGIONS_MAX_NUM 8 +#define CONFIG_SOC_PCNT_GROUPS 1 +#define CONFIG_SOC_PCNT_UNITS_PER_GROUP 4 +#define CONFIG_SOC_PCNT_CHANNELS_PER_UNIT 2 +#define CONFIG_SOC_PCNT_THRES_POINT_PER_UNIT 2 +#define CONFIG_SOC_PCNT_SUPPORT_RUNTIME_THRES_UPDATE 1 +#define CONFIG_SOC_RMT_GROUPS 1 +#define CONFIG_SOC_RMT_TX_CANDIDATES_PER_GROUP 2 +#define CONFIG_SOC_RMT_RX_CANDIDATES_PER_GROUP 2 +#define CONFIG_SOC_RMT_CHANNELS_PER_GROUP 4 +#define CONFIG_SOC_RMT_MEM_WORDS_PER_CHANNEL 48 +#define CONFIG_SOC_RMT_SUPPORT_RX_PINGPONG 1 +#define CONFIG_SOC_RMT_SUPPORT_RX_DEMODULATION 1 +#define CONFIG_SOC_RMT_SUPPORT_TX_ASYNC_STOP 1 +#define CONFIG_SOC_RMT_SUPPORT_TX_LOOP_COUNT 1 +#define CONFIG_SOC_RMT_SUPPORT_TX_LOOP_AUTO_STOP 1 +#define CONFIG_SOC_RMT_SUPPORT_TX_SYNCHRO 1 +#define CONFIG_SOC_RMT_SUPPORT_TX_CARRIER_DATA_ONLY 1 +#define CONFIG_SOC_RMT_SUPPORT_XTAL 1 +#define CONFIG_SOC_RMT_SUPPORT_RC_FAST 1 +#define CONFIG_SOC_MCPWM_GROUPS 1 +#define CONFIG_SOC_MCPWM_TIMERS_PER_GROUP 3 +#define CONFIG_SOC_MCPWM_OPERATORS_PER_GROUP 3 +#define CONFIG_SOC_MCPWM_COMPARATORS_PER_OPERATOR 2 +#define CONFIG_SOC_MCPWM_GENERATORS_PER_OPERATOR 2 +#define CONFIG_SOC_MCPWM_TRIGGERS_PER_OPERATOR 2 +#define CONFIG_SOC_MCPWM_GPIO_FAULTS_PER_GROUP 3 +#define CONFIG_SOC_MCPWM_CAPTURE_TIMERS_PER_GROUP 1 +#define CONFIG_SOC_MCPWM_CAPTURE_CHANNELS_PER_TIMER 3 +#define CONFIG_SOC_MCPWM_GPIO_SYNCHROS_PER_GROUP 3 +#define CONFIG_SOC_MCPWM_SWSYNC_CAN_PROPAGATE 1 +#define CONFIG_SOC_MCPWM_SUPPORT_ETM 1 +#define CONFIG_SOC_MCPWM_CAPTURE_CLK_FROM_GROUP 1 +#define CONFIG_SOC_PARLIO_GROUPS 1 +#define CONFIG_SOC_PARLIO_TX_UNITS_PER_GROUP 1 +#define CONFIG_SOC_PARLIO_RX_UNITS_PER_GROUP 1 +#define CONFIG_SOC_PARLIO_TX_UNIT_MAX_DATA_WIDTH 16 +#define CONFIG_SOC_PARLIO_RX_UNIT_MAX_DATA_WIDTH 16 +#define CONFIG_SOC_PARLIO_TX_RX_SHARE_INTERRUPT 1 +#define CONFIG_SOC_RSA_MAX_BIT_LEN 3072 +#define CONFIG_SOC_SHA_DMA_MAX_BUFFER_SIZE 3968 +#define CONFIG_SOC_SHA_SUPPORT_DMA 1 +#define CONFIG_SOC_SHA_SUPPORT_RESUME 1 +#define CONFIG_SOC_SHA_GDMA 1 +#define CONFIG_SOC_SHA_SUPPORT_SHA1 1 +#define CONFIG_SOC_SHA_SUPPORT_SHA224 1 +#define CONFIG_SOC_SHA_SUPPORT_SHA256 1 +#define CONFIG_SOC_SDM_GROUPS 1 +#define CONFIG_SOC_SDM_CHANNELS_PER_GROUP 4 +#define CONFIG_SOC_SDM_CLK_SUPPORT_PLL_F80M 1 +#define CONFIG_SOC_SDM_CLK_SUPPORT_XTAL 1 +#define CONFIG_SOC_SPI_PERIPH_NUM 2 +#define CONFIG_SOC_SPI_MAX_CS_NUM 6 +#define CONFIG_SOC_SPI_MAXIMUM_BUFFER_SIZE 64 +#define CONFIG_SOC_SPI_SUPPORT_DDRCLK 1 +#define CONFIG_SOC_SPI_SLAVE_SUPPORT_SEG_TRANS 1 +#define CONFIG_SOC_SPI_SUPPORT_CD_SIG 1 +#define CONFIG_SOC_SPI_SUPPORT_CONTINUOUS_TRANS 1 +#define CONFIG_SOC_SPI_SUPPORT_SLAVE_HD_VER2 1 +#define CONFIG_SOC_SPI_SUPPORT_CLK_XTAL 1 +#define CONFIG_SOC_SPI_SUPPORT_CLK_PLL_F80M 1 +#define CONFIG_SOC_SPI_SUPPORT_CLK_RC_FAST 1 +#define CONFIG_SOC_MEMSPI_IS_INDEPENDENT 1 +#define CONFIG_SOC_SPI_MAX_PRE_DIVIDER 16 +#define CONFIG_SOC_SPI_MEM_SUPPORT_AUTO_WAIT_IDLE 1 +#define CONFIG_SOC_SPI_MEM_SUPPORT_AUTO_SUSPEND 1 +#define CONFIG_SOC_SPI_MEM_SUPPORT_AUTO_RESUME 1 +#define CONFIG_SOC_SPI_MEM_SUPPORT_IDLE_INTR 1 +#define CONFIG_SOC_SPI_MEM_SUPPORT_SW_SUSPEND 1 +#define CONFIG_SOC_SPI_MEM_SUPPORT_CHECK_SUS 1 +#define CONFIG_SOC_SPI_MEM_SUPPORT_WRAP 1 +#define CONFIG_SOC_MEMSPI_SRC_FREQ_80M_SUPPORTED 1 +#define CONFIG_SOC_MEMSPI_SRC_FREQ_40M_SUPPORTED 1 +#define CONFIG_SOC_MEMSPI_SRC_FREQ_20M_SUPPORTED 1 +#define CONFIG_SOC_SYSTIMER_COUNTER_NUM 2 +#define CONFIG_SOC_SYSTIMER_ALARM_NUM 3 +#define CONFIG_SOC_SYSTIMER_BIT_WIDTH_LO 32 +#define CONFIG_SOC_SYSTIMER_BIT_WIDTH_HI 20 +#define CONFIG_SOC_SYSTIMER_FIXED_DIVIDER 1 +#define CONFIG_SOC_SYSTIMER_SUPPORT_RC_FAST 1 +#define CONFIG_SOC_SYSTIMER_INT_LEVEL 1 +#define CONFIG_SOC_SYSTIMER_ALARM_MISS_COMPENSATE 1 +#define CONFIG_SOC_SYSTIMER_SUPPORT_ETM 1 +#define CONFIG_SOC_LP_TIMER_BIT_WIDTH_LO 32 +#define CONFIG_SOC_LP_TIMER_BIT_WIDTH_HI 16 +#define CONFIG_SOC_TIMER_GROUPS 2 +#define CONFIG_SOC_TIMER_GROUP_TIMERS_PER_GROUP 1 +#define CONFIG_SOC_TIMER_GROUP_COUNTER_BIT_WIDTH 54 +#define CONFIG_SOC_TIMER_GROUP_SUPPORT_XTAL 1 +#define CONFIG_SOC_TIMER_GROUP_SUPPORT_RC_FAST 1 +#define CONFIG_SOC_TIMER_GROUP_TOTAL_TIMERS 2 +#define CONFIG_SOC_TIMER_SUPPORT_ETM 1 +#define CONFIG_SOC_MWDT_SUPPORT_XTAL 1 +#define CONFIG_SOC_TWAI_CONTROLLER_NUM 2 +#define CONFIG_SOC_TWAI_CLK_SUPPORT_XTAL 1 +#define CONFIG_SOC_TWAI_BRP_MIN 2 +#define CONFIG_SOC_TWAI_BRP_MAX 32768 +#define CONFIG_SOC_TWAI_SUPPORTS_RX_STATUS 1 +#define CONFIG_SOC_EFUSE_DIS_DOWNLOAD_ICACHE 1 +#define CONFIG_SOC_EFUSE_DIS_PAD_JTAG 1 +#define CONFIG_SOC_EFUSE_DIS_USB_JTAG 1 +#define CONFIG_SOC_EFUSE_DIS_DIRECT_BOOT 1 +#define CONFIG_SOC_EFUSE_SOFT_DIS_JTAG 1 +#define CONFIG_SOC_EFUSE_DIS_ICACHE 1 +#define CONFIG_SOC_EFUSE_BLOCK9_KEY_PURPOSE_QUIRK 1 +#define CONFIG_SOC_SECURE_BOOT_V2_RSA 1 +#define CONFIG_SOC_SECURE_BOOT_V2_ECC 1 +#define CONFIG_SOC_EFUSE_SECURE_BOOT_KEY_DIGESTS 3 +#define CONFIG_SOC_EFUSE_REVOKE_BOOT_KEY_DIGESTS 1 +#define CONFIG_SOC_SUPPORT_SECURE_BOOT_REVOKE_KEY 1 +#define CONFIG_SOC_FLASH_ENCRYPTED_XTS_AES_BLOCK_MAX 32 +#define CONFIG_SOC_FLASH_ENCRYPTION_XTS_AES 1 +#define CONFIG_SOC_FLASH_ENCRYPTION_XTS_AES_128 1 +#define CONFIG_SOC_CRYPTO_DPA_PROTECTION_SUPPORTED 1 +#define CONFIG_SOC_UART_NUM 2 +#define CONFIG_SOC_UART_FIFO_LEN 128 +#define CONFIG_SOC_UART_BITRATE_MAX 5000000 +#define CONFIG_SOC_UART_SUPPORT_PLL_F80M_CLK 1 +#define CONFIG_SOC_UART_SUPPORT_RTC_CLK 1 +#define CONFIG_SOC_UART_SUPPORT_XTAL_CLK 1 +#define CONFIG_SOC_UART_SUPPORT_WAKEUP_INT 1 +#define CONFIG_SOC_UART_SUPPORT_FSM_TX_WAIT_SEND 1 +#define CONFIG_SOC_COEX_HW_PTI 1 +#define CONFIG_SOC_EXTERNAL_COEX_ADVANCE 1 +#define CONFIG_SOC_PHY_DIG_REGS_MEM_SIZE 21 +#define CONFIG_SOC_WIFI_LIGHT_SLEEP_CLK_WIDTH 12 +#define CONFIG_SOC_PM_SUPPORT_WIFI_WAKEUP 1 +#define CONFIG_SOC_PM_SUPPORT_BEACON_WAKEUP 1 +#define CONFIG_SOC_PM_SUPPORT_BT_WAKEUP 1 +#define CONFIG_SOC_PM_SUPPORT_EXT1_WAKEUP 1 +#define CONFIG_SOC_PM_SUPPORT_EXT1_WAKEUP_MODE_PER_PIN 1 +#define CONFIG_SOC_PM_SUPPORT_CPU_PD 1 +#define CONFIG_SOC_PM_SUPPORT_MODEM_PD 1 +#define CONFIG_SOC_PM_SUPPORT_XTAL32K_PD 1 +#define CONFIG_SOC_PM_SUPPORT_RC32K_PD 1 +#define CONFIG_SOC_PM_SUPPORT_RC_FAST_PD 1 +#define CONFIG_SOC_PM_SUPPORT_VDDSDIO_PD 1 +#define CONFIG_SOC_PM_SUPPORT_TOP_PD 1 +#define CONFIG_SOC_PM_SUPPORT_HP_AON_PD 1 +#define CONFIG_SOC_PM_SUPPORT_MAC_BB_PD 1 +#define CONFIG_SOC_PM_SUPPORT_RTC_PERIPH_PD 1 +#define CONFIG_SOC_PM_SUPPORT_PMU_MODEM_STATE 1 +#define CONFIG_SOC_PM_SUPPORT_DEEPSLEEP_CHECK_STUB_ONLY 1 +#define CONFIG_SOC_PM_CPU_RETENTION_BY_SW 1 +#define CONFIG_SOC_PM_MODEM_RETENTION_BY_REGDMA 1 +#define CONFIG_SOC_PM_RETENTION_HAS_CLOCK_BUG 1 +#define CONFIG_SOC_PM_PAU_LINK_NUM 4 +#define CONFIG_SOC_CLK_RC_FAST_SUPPORT_CALIBRATION 1 +#define CONFIG_SOC_MODEM_CLOCK_IS_INDEPENDENT 1 +#define CONFIG_SOC_CLK_XTAL32K_SUPPORTED 1 +#define CONFIG_SOC_CLK_OSC_SLOW_SUPPORTED 1 +#define CONFIG_SOC_CLK_RC32K_SUPPORTED 1 +#define CONFIG_SOC_TEMPERATURE_SENSOR_SUPPORT_FAST_RC 1 +#define CONFIG_SOC_TEMPERATURE_SENSOR_SUPPORT_XTAL 1 +#define CONFIG_SOC_TEMPERATURE_SENSOR_INTR_SUPPORT 1 +#define CONFIG_SOC_WIFI_HW_TSF 1 +#define CONFIG_SOC_WIFI_GCMP_SUPPORT 1 +#define CONFIG_SOC_WIFI_WAPI_SUPPORT 1 +#define CONFIG_SOC_WIFI_CSI_SUPPORT 1 +#define CONFIG_SOC_WIFI_MESH_SUPPORT 1 +#define CONFIG_SOC_WIFI_HE_SUPPORT 1 +#define CONFIG_SOC_BLE_SUPPORTED 1 +#define CONFIG_SOC_BLE_MESH_SUPPORTED 1 +#define CONFIG_SOC_ESP_NIMBLE_CONTROLLER 1 +#define CONFIG_SOC_BLE_50_SUPPORTED 1 +#define CONFIG_SOC_BLE_DEVICE_PRIVACY_SUPPORTED 1 +#define CONFIG_SOC_BLE_POWER_CONTROL_SUPPORTED 1 +#define CONFIG_SOC_BLE_PERIODIC_ADV_ENH_SUPPORTED 1 +#define CONFIG_SOC_BLUFI_SUPPORTED 1 +#define CONFIG_SOC_BLE_MULTI_CONN_OPTIMIZATION 1 +#define CONFIG_SOC_BLE_USE_WIFI_PWR_CLK_WORKAROUND 1 +#define CONFIG_SOC_PHY_COMBO_MODULE 1 +#define CONFIG_IDF_CMAKE 1 +#define CONFIG_IDF_TARGET_ARCH_RISCV 1 +#define CONFIG_IDF_TARGET_ARCH "riscv" +#define CONFIG_IDF_TARGET "esp32c6" +#define CONFIG_IDF_TARGET_ESP32C6 1 +#define CONFIG_IDF_FIRMWARE_CHIP_ID 0x000D +#define CONFIG_APP_BUILD_TYPE_APP_2NDBOOT 1 +#define CONFIG_APP_BUILD_GENERATE_BINARIES 1 +#define CONFIG_APP_BUILD_BOOTLOADER 1 +#define CONFIG_APP_BUILD_USE_FLASH_SECTIONS 1 +#define CONFIG_BOOTLOADER_OFFSET_IN_FLASH 0x0 +#define CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_SIZE 1 +#define CONFIG_BOOTLOADER_LOG_LEVEL_INFO 1 +#define CONFIG_BOOTLOADER_LOG_LEVEL 3 +#define CONFIG_BOOTLOADER_REGION_PROTECTION_ENABLE 1 +#define CONFIG_BOOTLOADER_WDT_ENABLE 1 +#define CONFIG_BOOTLOADER_WDT_TIME_MS 9000 +#define CONFIG_BOOTLOADER_RESERVE_RTC_SIZE 0x0 +#define CONFIG_BOOTLOADER_FLASH_XMC_SUPPORT 1 +#define CONFIG_SECURE_BOOT_V2_RSA_SUPPORTED 1 +#define CONFIG_SECURE_BOOT_V2_ECC_SUPPORTED 1 +#define CONFIG_SECURE_BOOT_V2_PREFERRED 1 +#define CONFIG_SECURE_ROM_DL_MODE_ENABLED 1 +#define CONFIG_APP_COMPILE_TIME_DATE 1 +#define CONFIG_APP_RETRIEVE_LEN_ELF_SHA 16 +#define CONFIG_ESP_ROM_HAS_CRC_LE 1 +#define CONFIG_ESP_ROM_HAS_CRC_BE 1 +#define CONFIG_ESP_ROM_HAS_JPEG_DECODE 1 +#define CONFIG_ESP_ROM_UART_CLK_IS_XTAL 1 +#define CONFIG_ESP_ROM_USB_SERIAL_DEVICE_NUM 3 +#define CONFIG_ESP_ROM_HAS_RETARGETABLE_LOCKING 1 +#define CONFIG_ESP_ROM_GET_CLK_FREQ 1 +#define CONFIG_ESP_ROM_HAS_RVFPLIB 1 +#define CONFIG_ESP_ROM_HAS_HAL_WDT 1 +#define CONFIG_ESP_ROM_HAS_HAL_SYSTIMER 1 +#define CONFIG_ESP_ROM_HAS_HEAP_TLSF 1 +#define CONFIG_ESP_ROM_TLSF_CHECK_PATCH 1 +#define CONFIG_ESP_ROM_HAS_LAYOUT_TABLE 1 +#define CONFIG_ESP_ROM_HAS_SPI_FLASH 1 +#define CONFIG_ESP_ROM_HAS_REGI2C_BUG 1 +#define CONFIG_ESP_ROM_HAS_NEWLIB_NORMAL_FORMAT 1 +#define CONFIG_ESP_ROM_REV0_HAS_NO_ECDSA_INTERFACE 1 +#define CONFIG_ESP_ROM_WDT_INIT_PATCH 1 +#define CONFIG_ESP_ROM_NEEDS_SET_CACHE_MMU_SIZE 1 +#define CONFIG_ESP_ROM_RAM_APP_NEEDS_MMU_INIT 1 +#define CONFIG_BOOT_ROM_LOG_ALWAYS_ON 1 +#define CONFIG_ESPTOOLPY_FLASHMODE_DIO 1 +#define CONFIG_ESPTOOLPY_FLASH_SAMPLE_MODE_STR 1 +#define CONFIG_ESPTOOLPY_FLASHMODE "dio" +#define CONFIG_ESPTOOLPY_FLASHFREQ_80M 1 +#define CONFIG_ESPTOOLPY_FLASHFREQ_80M_DEFAULT 1 +#define CONFIG_ESPTOOLPY_FLASHFREQ "80m" +#define CONFIG_ESPTOOLPY_FLASHSIZE_2MB 1 +#define CONFIG_ESPTOOLPY_FLASHSIZE "2MB" +#define CONFIG_ESPTOOLPY_BEFORE_RESET 1 +#define CONFIG_ESPTOOLPY_BEFORE "default_reset" +#define CONFIG_ESPTOOLPY_AFTER_RESET 1 +#define CONFIG_ESPTOOLPY_AFTER "hard_reset" +#define CONFIG_ESPTOOLPY_MONITOR_BAUD 115200 +#define CONFIG_PARTITION_TABLE_SINGLE_APP 1 +#define CONFIG_PARTITION_TABLE_CUSTOM_FILENAME "partitions.csv" +#define CONFIG_PARTITION_TABLE_FILENAME "partitions_singleapp.csv" +#define CONFIG_PARTITION_TABLE_OFFSET 0x8000 +#define CONFIG_PARTITION_TABLE_MD5 1 +#define CONFIG_COMPILER_OPTIMIZATION_SIZE 1 +#define CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_ENABLE 1 +#define CONFIG_COMPILER_FLOAT_LIB_FROM_RVFPLIB 1 +#define CONFIG_COMPILER_OPTIMIZATION_ASSERTION_LEVEL 2 +#define CONFIG_COMPILER_HIDE_PATHS_MACROS 1 +#define CONFIG_COMPILER_STACK_CHECK_MODE_NONE 1 +#define CONFIG_APPTRACE_DEST_NONE 1 +#define CONFIG_APPTRACE_DEST_UART_NONE 1 +#define CONFIG_APPTRACE_UART_TASK_PRIO 1 +#define CONFIG_APPTRACE_LOCK_ENABLE 1 +#define CONFIG_SPI_MASTER_ISR_IN_IRAM 1 +#define CONFIG_SPI_SLAVE_ISR_IN_IRAM 1 +#define CONFIG_GPTIMER_ISR_HANDLER_IN_IRAM 1 +#define CONFIG_EFUSE_MAX_BLK_LEN 256 +#define CONFIG_ESP_TLS_USING_MBEDTLS 1 +#define CONFIG_ESP_TLS_USE_DS_PERIPHERAL 1 +#define CONFIG_ESP_COEX_SW_COEXIST_ENABLE 1 +#define CONFIG_ESP_ERR_TO_NAME_LOOKUP 1 +#define CONFIG_ETH_ENABLED 1 +#define CONFIG_ETH_USE_SPI_ETHERNET 1 +#define CONFIG_ESP_EVENT_POST_FROM_ISR 1 +#define CONFIG_ESP_EVENT_POST_FROM_IRAM_ISR 1 +#define CONFIG_ESP_HTTP_CLIENT_ENABLE_HTTPS 1 +#define CONFIG_HTTPD_MAX_REQ_HDR_LEN 512 +#define CONFIG_HTTPD_MAX_URI_LEN 512 +#define CONFIG_HTTPD_ERR_RESP_NO_DELAY 1 +#define CONFIG_HTTPD_PURGE_BUF_LEN 32 +#define CONFIG_ESP32C6_REV_MIN_0 1 +#define CONFIG_ESP32C6_REV_MIN_FULL 0 +#define CONFIG_ESP_REV_MIN_FULL 0 +#define CONFIG_ESP32C6_REV_MAX_FULL 99 +#define CONFIG_ESP_REV_MAX_FULL 99 +#define CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_STA 1 +#define CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_AP 1 +#define CONFIG_ESP_MAC_ADDR_UNIVERSE_BT 1 +#define CONFIG_ESP_MAC_ADDR_UNIVERSE_ETH 1 +#define CONFIG_ESP_MAC_ADDR_UNIVERSE_IEEE802154 1 +#define CONFIG_ESP_MAC_UNIVERSAL_MAC_ADDRESSES_FOUR 1 +#define CONFIG_ESP32C6_UNIVERSAL_MAC_ADDRESSES_FOUR 1 +#define CONFIG_ESP32C6_UNIVERSAL_MAC_ADDRESSES 4 +#define CONFIG_ESP_SLEEP_FLASH_LEAKAGE_WORKAROUND 1 +#define CONFIG_ESP_SLEEP_GPIO_RESET_WORKAROUND 1 +#define CONFIG_ESP_SLEEP_WAIT_FLASH_READY_EXTRA_DELAY 0 +#define CONFIG_ESP_SLEEP_GPIO_ENABLE_INTERNAL_RESISTORS 1 +#define CONFIG_RTC_CLK_SRC_INT_RC 1 +#define CONFIG_RTC_CLK_CAL_CYCLES 1024 +#define CONFIG_PERIPH_CTRL_FUNC_IN_IRAM 1 +#define CONFIG_XTAL_FREQ_40 1 +#define CONFIG_XTAL_FREQ 40 +#define CONFIG_ESP_CRYPTO_DPA_PROTECTION_AT_STARTUP 1 +#define CONFIG_ESP_CRYPTO_DPA_PROTECTION_LEVEL_LOW 1 +#define CONFIG_ESP_CRYPTO_DPA_PROTECTION_LEVEL 1 +#define CONFIG_LCD_PANEL_IO_FORMAT_BUF_SIZE 32 +#define CONFIG_ESP_NETIF_IP_LOST_TIMER_INTERVAL 120 +#define CONFIG_ESP_NETIF_TCPIP_LWIP 1 +#define CONFIG_ESP_NETIF_USES_TCPIP_WITH_BSD_API 1 +#define CONFIG_ESP_PHY_CALIBRATION_AND_DATA_STORAGE 1 +#define CONFIG_ESP_PHY_MAX_WIFI_TX_POWER 20 +#define CONFIG_ESP_PHY_MAX_TX_POWER 20 +#define CONFIG_ESP_PHY_RF_CAL_PARTIAL 1 +#define CONFIG_ESP_PHY_CALIBRATION_MODE 0 +#define CONFIG_PM_POWER_DOWN_CPU_IN_LIGHT_SLEEP 1 +#define CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ_160 1 +#define CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ 160 +#define CONFIG_ESP_SYSTEM_PANIC_PRINT_REBOOT 1 +#define CONFIG_ESP_SYSTEM_PANIC_REBOOT_DELAY_SECONDS 0 +#define CONFIG_ESP_SYSTEM_SINGLE_CORE_MODE 1 +#define CONFIG_ESP_SYSTEM_RTC_FAST_MEM_AS_HEAP_DEPCHECK 1 +#define CONFIG_ESP_SYSTEM_ALLOW_RTC_FAST_MEM_AS_HEAP 1 +#define CONFIG_ESP_SYSTEM_PMP_IDRAM_SPLIT 1 +#define CONFIG_ESP_SYSTEM_EVENT_QUEUE_SIZE 32 +#define CONFIG_ESP_SYSTEM_EVENT_TASK_STACK_SIZE 2304 +#define CONFIG_ESP_MAIN_TASK_STACK_SIZE 3584 +#define CONFIG_ESP_MAIN_TASK_AFFINITY_CPU0 1 +#define CONFIG_ESP_MAIN_TASK_AFFINITY 0x0 +#define CONFIG_ESP_MINIMAL_SHARED_STACK_SIZE 2048 +#define CONFIG_ESP_CONSOLE_UART_DEFAULT 1 +#define CONFIG_ESP_CONSOLE_SECONDARY_USB_SERIAL_JTAG 1 +#define CONFIG_ESP_CONSOLE_USB_SERIAL_JTAG_ENABLED 1 +#define CONFIG_ESP_CONSOLE_UART 1 +#define CONFIG_ESP_CONSOLE_UART_NUM 0 +#define CONFIG_ESP_CONSOLE_UART_BAUDRATE 115200 +#define CONFIG_ESP_INT_WDT 1 +#define CONFIG_ESP_INT_WDT_TIMEOUT_MS 300 +#define CONFIG_ESP_TASK_WDT_EN 1 +#define CONFIG_ESP_TASK_WDT_INIT 1 +#define CONFIG_ESP_TASK_WDT_TIMEOUT_S 5 +#define CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU0 1 +#define CONFIG_ESP_DEBUG_OCDAWARE 1 +#define CONFIG_ESP_SYSTEM_CHECK_INT_LEVEL_4 1 +#define CONFIG_ESP_BROWNOUT_DET 1 +#define CONFIG_ESP_BROWNOUT_DET_LVL_SEL_7 1 +#define CONFIG_ESP_BROWNOUT_DET_LVL 7 +#define CONFIG_ESP_SYSTEM_BROWNOUT_INTR 1 +#define CONFIG_ESP_IPC_TASK_STACK_SIZE 1024 +#define CONFIG_ESP_TIME_FUNCS_USE_RTC_TIMER 1 +#define CONFIG_ESP_TIME_FUNCS_USE_ESP_TIMER 1 +#define CONFIG_ESP_TIMER_TASK_STACK_SIZE 3584 +#define CONFIG_ESP_TIMER_INTERRUPT_LEVEL 1 +#define CONFIG_ESP_TIMER_TASK_AFFINITY 0x0 +#define CONFIG_ESP_TIMER_TASK_AFFINITY_CPU0 1 +#define CONFIG_ESP_TIMER_ISR_AFFINITY 0x1 +#define CONFIG_ESP_TIMER_ISR_AFFINITY_CPU0 1 +#define CONFIG_ESP_TIMER_IMPL_SYSTIMER 1 +#define CONFIG_ESP_WIFI_ENABLED 1 +#define CONFIG_ESP_WIFI_STATIC_RX_BUFFER_NUM 10 +#define CONFIG_ESP_WIFI_DYNAMIC_RX_BUFFER_NUM 32 +#define CONFIG_ESP_WIFI_DYNAMIC_TX_BUFFER 1 +#define CONFIG_ESP_WIFI_TX_BUFFER_TYPE 1 +#define CONFIG_ESP_WIFI_DYNAMIC_TX_BUFFER_NUM 32 +#define CONFIG_ESP_WIFI_STATIC_RX_MGMT_BUFFER 1 +#define CONFIG_ESP_WIFI_DYNAMIC_RX_MGMT_BUF 0 +#define CONFIG_ESP_WIFI_RX_MGMT_BUF_NUM_DEF 5 +#define CONFIG_ESP_WIFI_AMPDU_TX_ENABLED 1 +#define CONFIG_ESP_WIFI_TX_BA_WIN 6 +#define CONFIG_ESP_WIFI_AMPDU_RX_ENABLED 1 +#define CONFIG_ESP_WIFI_RX_BA_WIN 6 +#define CONFIG_ESP_WIFI_NVS_ENABLED 1 +#define CONFIG_ESP_WIFI_SOFTAP_BEACON_MAX_LEN 752 +#define CONFIG_ESP_WIFI_MGMT_SBUF_NUM 32 +#define CONFIG_ESP_WIFI_IRAM_OPT 1 +#define CONFIG_ESP_WIFI_EXTRA_IRAM_OPT 1 +#define CONFIG_ESP_WIFI_RX_IRAM_OPT 1 +#define CONFIG_ESP_WIFI_ENABLE_WPA3_SAE 1 +#define CONFIG_ESP_WIFI_ENABLE_SAE_PK 1 +#define CONFIG_ESP_WIFI_SOFTAP_SAE_SUPPORT 1 +#define CONFIG_ESP_WIFI_STA_DISCONNECTED_PM_ENABLE 1 +#define CONFIG_ESP_WIFI_SOFTAP_SUPPORT 1 +#define CONFIG_ESP_WIFI_ESPNOW_MAX_ENCRYPT_NUM 7 +#define CONFIG_ESP_WIFI_ENABLE_WIFI_TX_STATS 1 +#define CONFIG_ESP_WIFI_MBEDTLS_CRYPTO 1 +#define CONFIG_ESP_WIFI_ENABLE_WIFI_RX_STATS 1 +#define CONFIG_ESP_WIFI_ENABLE_WIFI_RX_MU_STATS 1 +#define CONFIG_ESP_WIFI_ENTERPRISE_SUPPORT 1 +#define CONFIG_ESP_COREDUMP_ENABLE_TO_NONE 1 +#define CONFIG_FATFS_VOLUME_COUNT 2 +#define CONFIG_FATFS_LFN_NONE 1 +#define CONFIG_FATFS_SECTOR_4096 1 +#define CONFIG_FATFS_CODEPAGE_437 1 +#define CONFIG_FATFS_CODEPAGE 437 +#define CONFIG_FATFS_FS_LOCK 0 +#define CONFIG_FATFS_TIMEOUT_MS 10000 +#define CONFIG_FATFS_PER_FILE_CACHE 1 +#define CONFIG_FATFS_VFS_FSTAT_BLKSIZE 0 +#define CONFIG_FREERTOS_UNICORE 1 +#define CONFIG_FREERTOS_HZ 100 +#define CONFIG_FREERTOS_OPTIMIZED_SCHEDULER 1 +#define CONFIG_FREERTOS_CHECK_STACKOVERFLOW_CANARY 1 +#define CONFIG_FREERTOS_THREAD_LOCAL_STORAGE_POINTERS 1 +#define CONFIG_FREERTOS_IDLE_TASK_STACKSIZE 1536 +#define CONFIG_FREERTOS_MAX_TASK_NAME_LEN 16 +#define CONFIG_FREERTOS_TIMER_TASK_PRIORITY 1 +#define CONFIG_FREERTOS_TIMER_TASK_STACK_DEPTH 2048 +#define CONFIG_FREERTOS_TIMER_QUEUE_LENGTH 10 +#define CONFIG_FREERTOS_QUEUE_REGISTRY_SIZE 0 +#define CONFIG_FREERTOS_TASK_NOTIFICATION_ARRAY_ENTRIES 1 +#define CONFIG_FREERTOS_TLSP_DELETION_CALLBACKS 1 +#define CONFIG_FREERTOS_CHECK_MUTEX_GIVEN_BY_OWNER 1 +#define CONFIG_FREERTOS_ISR_STACKSIZE 1536 +#define CONFIG_FREERTOS_INTERRUPT_BACKTRACE 1 +#define CONFIG_FREERTOS_TICK_SUPPORT_SYSTIMER 1 +#define CONFIG_FREERTOS_CORETIMER_SYSTIMER_LVL1 1 +#define CONFIG_FREERTOS_SYSTICK_USES_SYSTIMER 1 +#define CONFIG_FREERTOS_ENABLE_TASK_SNAPSHOT 1 +#define CONFIG_FREERTOS_NO_AFFINITY 0x7FFFFFFF +#define CONFIG_FREERTOS_SUPPORT_STATIC_ALLOCATION 1 +#define CONFIG_FREERTOS_DEBUG_OCDAWARE 1 +#define CONFIG_HAL_ASSERTION_EQUALS_SYSTEM 1 +#define CONFIG_HAL_DEFAULT_ASSERTION_LEVEL 2 +#define CONFIG_HAL_SYSTIMER_USE_ROM_IMPL 1 +#define CONFIG_HAL_WDT_USE_ROM_IMPL 1 +#define CONFIG_HAL_SPI_MASTER_FUNC_IN_IRAM 1 +#define CONFIG_HAL_SPI_SLAVE_FUNC_IN_IRAM 1 +#define CONFIG_HEAP_POISONING_DISABLED 1 +#define CONFIG_HEAP_TRACING_OFF 1 +#define CONFIG_HEAP_TLSF_USE_ROM_IMPL 1 +#define CONFIG_IEEE802154_ENABLED 1 +#define CONFIG_IEEE802154_RX_BUFFER_SIZE 20 +#define CONFIG_IEEE802154_CCA_ED 1 +#define CONFIG_IEEE802154_CCA_MODE 1 +#define CONFIG_IEEE802154_CCA_THRESHOLD -60 +#define CONFIG_IEEE802154_PENDING_TABLE_SIZE 20 +#define CONFIG_LOG_DEFAULT_LEVEL_INFO 1 +#define CONFIG_LOG_DEFAULT_LEVEL 3 +#define CONFIG_LOG_MAXIMUM_EQUALS_DEFAULT 1 +#define CONFIG_LOG_MAXIMUM_LEVEL 3 +#define CONFIG_LOG_COLORS 1 +#define CONFIG_LOG_TIMESTAMP_SOURCE_RTOS 1 +#define CONFIG_LWIP_LOCAL_HOSTNAME "espressif" +#define CONFIG_LWIP_TCPIP_TASK_PRIO 18 +#define CONFIG_LWIP_DNS_SUPPORT_MDNS_QUERIES 1 +#define CONFIG_LWIP_TIMERS_ONDEMAND 1 +#define CONFIG_LWIP_ND6 1 +#define CONFIG_LWIP_MAX_SOCKETS 10 +#define CONFIG_LWIP_SO_REUSE 1 +#define CONFIG_LWIP_SO_REUSE_RXTOALL 1 +#define CONFIG_LWIP_IP4_FRAG 1 +#define CONFIG_LWIP_IP6_FRAG 1 +#define CONFIG_LWIP_IP_REASS_MAX_PBUFS 10 +#define CONFIG_LWIP_ESP_GRATUITOUS_ARP 1 +#define CONFIG_LWIP_GARP_TMR_INTERVAL 60 +#define CONFIG_LWIP_ESP_MLDV6_REPORT 1 +#define CONFIG_LWIP_MLDV6_TMR_INTERVAL 40 +#define CONFIG_LWIP_TCPIP_RECVMBOX_SIZE 32 +#define CONFIG_LWIP_DHCP_DOES_ARP_CHECK 1 +#define CONFIG_LWIP_DHCP_DISABLE_VENDOR_CLASS_ID 1 +#define CONFIG_LWIP_DHCP_OPTIONS_LEN 68 +#define CONFIG_LWIP_NUM_NETIF_CLIENT_DATA 0 +#define CONFIG_LWIP_DHCP_COARSE_TIMER_SECS 1 +#define CONFIG_LWIP_DHCPS 1 +#define CONFIG_LWIP_DHCPS_LEASE_UNIT 60 +#define CONFIG_LWIP_DHCPS_MAX_STATION_NUM 8 +#define CONFIG_LWIP_IPV4 1 +#define CONFIG_LWIP_IPV6 1 +#define CONFIG_LWIP_IPV6_NUM_ADDRESSES 3 +#define CONFIG_LWIP_NETIF_LOOPBACK 1 +#define CONFIG_LWIP_LOOPBACK_MAX_PBUFS 8 +#define CONFIG_LWIP_MAX_ACTIVE_TCP 16 +#define CONFIG_LWIP_MAX_LISTENING_TCP 16 +#define CONFIG_LWIP_TCP_HIGH_SPEED_RETRANSMISSION 1 +#define CONFIG_LWIP_TCP_MAXRTX 12 +#define CONFIG_LWIP_TCP_SYNMAXRTX 12 +#define CONFIG_LWIP_TCP_MSS 1440 +#define CONFIG_LWIP_TCP_TMR_INTERVAL 250 +#define CONFIG_LWIP_TCP_MSL 60000 +#define CONFIG_LWIP_TCP_FIN_WAIT_TIMEOUT 20000 +#define CONFIG_LWIP_TCP_SND_BUF_DEFAULT 5760 +#define CONFIG_LWIP_TCP_WND_DEFAULT 5760 +#define CONFIG_LWIP_TCP_RECVMBOX_SIZE 6 +#define CONFIG_LWIP_TCP_QUEUE_OOSEQ 1 +#define CONFIG_LWIP_TCP_OOSEQ_TIMEOUT 6 +#define CONFIG_LWIP_TCP_OOSEQ_MAX_PBUFS 4 +#define CONFIG_LWIP_TCP_OVERSIZE_MSS 1 +#define CONFIG_LWIP_TCP_RTO_TIME 1500 +#define CONFIG_LWIP_MAX_UDP_PCBS 16 +#define CONFIG_LWIP_UDP_RECVMBOX_SIZE 6 +#define CONFIG_LWIP_CHECKSUM_CHECK_ICMP 1 +#define CONFIG_LWIP_TCPIP_TASK_STACK_SIZE 3072 +#define CONFIG_LWIP_TCPIP_TASK_AFFINITY_NO_AFFINITY 1 +#define CONFIG_LWIP_TCPIP_TASK_AFFINITY 0x7FFFFFFF +#define CONFIG_LWIP_IPV6_MEMP_NUM_ND6_QUEUE 3 +#define CONFIG_LWIP_IPV6_ND6_NUM_NEIGHBORS 5 +#define CONFIG_LWIP_ICMP 1 +#define CONFIG_LWIP_MAX_RAW_PCBS 16 +#define CONFIG_LWIP_SNTP_MAX_SERVERS 1 +#define CONFIG_LWIP_SNTP_UPDATE_DELAY 3600000 +#define CONFIG_LWIP_BRIDGEIF_MAX_PORTS 7 +#define CONFIG_LWIP_ESP_LWIP_ASSERT 1 +#define CONFIG_LWIP_HOOK_TCP_ISN_DEFAULT 1 +#define CONFIG_LWIP_HOOK_IP6_ROUTE_NONE 1 +#define CONFIG_LWIP_HOOK_ND6_GET_GW_NONE 1 +#define CONFIG_LWIP_HOOK_IP6_SELECT_SRC_ADDR_NONE 1 +#define CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_NONE 1 +#define CONFIG_LWIP_HOOK_IP6_INPUT_NONE 1 +#define CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC 1 +#define CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN 1 +#define CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN 16384 +#define CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN 4096 +#define CONFIG_MBEDTLS_SSL_KEEP_PEER_CERTIFICATE 1 +#define CONFIG_MBEDTLS_PKCS7_C 1 +#define CONFIG_MBEDTLS_CERTIFICATE_BUNDLE 1 +#define CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_FULL 1 +#define CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_MAX_CERTS 200 +#define CONFIG_MBEDTLS_CMAC_C 1 +#define CONFIG_MBEDTLS_HARDWARE_AES 1 +#define CONFIG_MBEDTLS_AES_USE_INTERRUPT 1 +#define CONFIG_MBEDTLS_HARDWARE_MPI 1 +#define CONFIG_MBEDTLS_MPI_USE_INTERRUPT 1 +#define CONFIG_MBEDTLS_HARDWARE_SHA 1 +#define CONFIG_MBEDTLS_HARDWARE_ECC 1 +#define CONFIG_MBEDTLS_ECC_OTHER_CURVES_SOFT_FALLBACK 1 +#define CONFIG_MBEDTLS_ROM_MD5 1 +#define CONFIG_MBEDTLS_HAVE_TIME 1 +#define CONFIG_MBEDTLS_ECDSA_DETERMINISTIC 1 +#define CONFIG_MBEDTLS_SHA512_C 1 +#define CONFIG_MBEDTLS_TLS_SERVER_AND_CLIENT 1 +#define CONFIG_MBEDTLS_TLS_SERVER 1 +#define CONFIG_MBEDTLS_TLS_CLIENT 1 +#define CONFIG_MBEDTLS_TLS_ENABLED 1 +#define CONFIG_MBEDTLS_KEY_EXCHANGE_RSA 1 +#define CONFIG_MBEDTLS_KEY_EXCHANGE_ELLIPTIC_CURVE 1 +#define CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_RSA 1 +#define CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA 1 +#define CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA 1 +#define CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_RSA 1 +#define CONFIG_MBEDTLS_SSL_RENEGOTIATION 1 +#define CONFIG_MBEDTLS_SSL_PROTO_TLS1_2 1 +#define CONFIG_MBEDTLS_SSL_ALPN 1 +#define CONFIG_MBEDTLS_CLIENT_SSL_SESSION_TICKETS 1 +#define CONFIG_MBEDTLS_SERVER_SSL_SESSION_TICKETS 1 +#define CONFIG_MBEDTLS_AES_C 1 +#define CONFIG_MBEDTLS_CCM_C 1 +#define CONFIG_MBEDTLS_GCM_C 1 +#define CONFIG_MBEDTLS_PEM_PARSE_C 1 +#define CONFIG_MBEDTLS_PEM_WRITE_C 1 +#define CONFIG_MBEDTLS_X509_CRL_PARSE_C 1 +#define CONFIG_MBEDTLS_X509_CSR_PARSE_C 1 +#define CONFIG_MBEDTLS_ECP_C 1 +#define CONFIG_MBEDTLS_ECDH_C 1 +#define CONFIG_MBEDTLS_ECDSA_C 1 +#define CONFIG_MBEDTLS_ECP_DP_SECP192R1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_SECP224R1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_SECP256R1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_SECP384R1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_SECP521R1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_SECP192K1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_SECP224K1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_SECP256K1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_BP256R1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_BP384R1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_BP512R1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_CURVE25519_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_NIST_OPTIM 1 +#define CONFIG_MBEDTLS_ECP_FIXED_POINT_OPTIM 1 +#define CONFIG_MBEDTLS_LARGE_KEY_SOFTWARE_MPI 1 +#define CONFIG_MQTT_PROTOCOL_311 1 +#define CONFIG_MQTT_TRANSPORT_SSL 1 +#define CONFIG_MQTT_TRANSPORT_WEBSOCKET 1 +#define CONFIG_MQTT_TRANSPORT_WEBSOCKET_SECURE 1 +#define CONFIG_NEWLIB_STDOUT_LINE_ENDING_CRLF 1 +#define CONFIG_NEWLIB_STDIN_LINE_ENDING_CR 1 +#define CONFIG_NEWLIB_TIME_SYSCALL_USE_RTC_HRT 1 +#define CONFIG_OPENTHREAD_NETWORK_NAME "OpenThread-ESP" +#define CONFIG_OPENTHREAD_MESH_LOCAL_PREFIX "fd00:db8:a0:0::/64" +#define CONFIG_OPENTHREAD_NETWORK_CHANNEL 15 +#define CONFIG_OPENTHREAD_NETWORK_PANID 0x1234 +#define CONFIG_OPENTHREAD_NETWORK_EXTPANID "dead00beef00cafe" +#define CONFIG_OPENTHREAD_NETWORK_MASTERKEY "00112233445566778899aabbccddeeff" +#define CONFIG_OPENTHREAD_NETWORK_PSKC "104810e2315100afd6bc9215a6bfac53" +#define CONFIG_OPENTHREAD_XTAL_ACCURACY 130 +#define CONFIG_ESP_PROTOCOMM_SUPPORT_SECURITY_VERSION_0 1 +#define CONFIG_ESP_PROTOCOMM_SUPPORT_SECURITY_VERSION_1 1 +#define CONFIG_ESP_PROTOCOMM_SUPPORT_SECURITY_VERSION_2 1 +#define CONFIG_PTHREAD_TASK_PRIO_DEFAULT 5 +#define CONFIG_PTHREAD_TASK_STACK_SIZE_DEFAULT 3072 +#define CONFIG_PTHREAD_TASK_CORE_DEFAULT -1 +#define CONFIG_PTHREAD_TASK_NAME_DEFAULT "pthread" +#define CONFIG_MMU_PAGE_SIZE_32KB 1 +#define CONFIG_MMU_PAGE_MODE "32KB" +#define CONFIG_MMU_PAGE_SIZE 0x8000 +#define CONFIG_SPI_FLASH_ROM_DRIVER_PATCH 1 +#define CONFIG_SPI_FLASH_DANGEROUS_WRITE_ABORTS 1 +#define CONFIG_SPI_FLASH_YIELD_DURING_ERASE 1 +#define CONFIG_SPI_FLASH_ERASE_YIELD_DURATION_MS 20 +#define CONFIG_SPI_FLASH_ERASE_YIELD_TICKS 1 +#define CONFIG_SPI_FLASH_WRITE_CHUNK_SIZE 8192 +#define CONFIG_SPI_FLASH_BROWNOUT_RESET_XMC 1 +#define CONFIG_SPI_FLASH_BROWNOUT_RESET 1 +#define CONFIG_SPI_FLASH_VENDOR_XMC_SUPPORTED 1 +#define CONFIG_SPI_FLASH_ENABLE_ENCRYPTED_READ_WRITE 1 +#define CONFIG_SPIFFS_MAX_PARTITIONS 3 +#define CONFIG_SPIFFS_CACHE 1 +#define CONFIG_SPIFFS_CACHE_WR 1 +#define CONFIG_SPIFFS_PAGE_CHECK 1 +#define CONFIG_SPIFFS_GC_MAX_RUNS 10 +#define CONFIG_SPIFFS_PAGE_SIZE 256 +#define CONFIG_SPIFFS_OBJ_NAME_LEN 32 +#define CONFIG_SPIFFS_USE_MAGIC 1 +#define CONFIG_SPIFFS_USE_MAGIC_LENGTH 1 +#define CONFIG_SPIFFS_META_LENGTH 4 +#define CONFIG_SPIFFS_USE_MTIME 1 +#define CONFIG_WS_TRANSPORT 1 +#define CONFIG_WS_BUFFER_SIZE 1024 +#define CONFIG_UNITY_ENABLE_FLOAT 1 +#define CONFIG_UNITY_ENABLE_DOUBLE 1 +#define CONFIG_UNITY_ENABLE_IDF_TEST_RUNNER 1 +#define CONFIG_VFS_SUPPORT_IO 1 +#define CONFIG_VFS_SUPPORT_DIR 1 +#define CONFIG_VFS_SUPPORT_SELECT 1 +#define CONFIG_VFS_SUPPRESS_SELECT_DEBUG_OUTPUT 1 +#define CONFIG_VFS_SUPPORT_TERMIOS 1 +#define CONFIG_VFS_MAX_COUNT 8 +#define CONFIG_VFS_SEMIHOSTFS_MAX_MOUNT_POINTS 1 +#define CONFIG_WL_SECTOR_SIZE_4096 1 +#define CONFIG_WL_SECTOR_SIZE 4096 +#define CONFIG_WIFI_PROV_SCAN_MAX_ENTRIES 16 +#define CONFIG_WIFI_PROV_AUTOSTOP_TIMEOUT 30 +#define CONFIG_WIFI_PROV_STA_ALL_CHANNEL_SCAN 1 + +/* List of deprecated options */ +#define CONFIG_BROWNOUT_DET CONFIG_ESP_BROWNOUT_DET +#define CONFIG_BROWNOUT_DET_LVL CONFIG_ESP_BROWNOUT_DET_LVL +#define CONFIG_BROWNOUT_DET_LVL_SEL_7 CONFIG_ESP_BROWNOUT_DET_LVL_SEL_7 +#define CONFIG_COMPILER_OPTIMIZATION_LEVEL_RELEASE CONFIG_COMPILER_OPTIMIZATION_SIZE +#define CONFIG_CONSOLE_UART CONFIG_ESP_CONSOLE_UART +#define CONFIG_CONSOLE_UART_BAUDRATE CONFIG_ESP_CONSOLE_UART_BAUDRATE +#define CONFIG_CONSOLE_UART_DEFAULT CONFIG_ESP_CONSOLE_UART_DEFAULT +#define CONFIG_CONSOLE_UART_NUM CONFIG_ESP_CONSOLE_UART_NUM +#define CONFIG_ESP32_APPTRACE_DEST_NONE CONFIG_APPTRACE_DEST_NONE +#define CONFIG_ESP32_APPTRACE_LOCK_ENABLE CONFIG_APPTRACE_LOCK_ENABLE +#define CONFIG_ESP32_ENABLE_COREDUMP_TO_NONE CONFIG_ESP_COREDUMP_ENABLE_TO_NONE +#define CONFIG_ESP32_PHY_CALIBRATION_AND_DATA_STORAGE CONFIG_ESP_PHY_CALIBRATION_AND_DATA_STORAGE +#define CONFIG_ESP32_PHY_MAX_TX_POWER CONFIG_ESP_PHY_MAX_TX_POWER +#define CONFIG_ESP32_PHY_MAX_WIFI_TX_POWER CONFIG_ESP_PHY_MAX_WIFI_TX_POWER +#define CONFIG_ESP32_PTHREAD_TASK_CORE_DEFAULT CONFIG_PTHREAD_TASK_CORE_DEFAULT +#define CONFIG_ESP32_PTHREAD_TASK_NAME_DEFAULT CONFIG_PTHREAD_TASK_NAME_DEFAULT +#define CONFIG_ESP32_PTHREAD_TASK_PRIO_DEFAULT CONFIG_PTHREAD_TASK_PRIO_DEFAULT +#define CONFIG_ESP32_PTHREAD_TASK_STACK_SIZE_DEFAULT CONFIG_PTHREAD_TASK_STACK_SIZE_DEFAULT +#define CONFIG_ESP32_WIFI_AMPDU_RX_ENABLED CONFIG_ESP_WIFI_AMPDU_RX_ENABLED +#define CONFIG_ESP32_WIFI_AMPDU_TX_ENABLED CONFIG_ESP_WIFI_AMPDU_TX_ENABLED +#define CONFIG_ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM CONFIG_ESP_WIFI_DYNAMIC_RX_BUFFER_NUM +#define CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER CONFIG_ESP_WIFI_DYNAMIC_TX_BUFFER +#define CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER_NUM CONFIG_ESP_WIFI_DYNAMIC_TX_BUFFER_NUM +#define CONFIG_ESP32_WIFI_ENABLED CONFIG_ESP_WIFI_ENABLED +#define CONFIG_ESP32_WIFI_ENABLE_WPA3_SAE CONFIG_ESP_WIFI_ENABLE_WPA3_SAE +#define CONFIG_ESP32_WIFI_IRAM_OPT CONFIG_ESP_WIFI_IRAM_OPT +#define CONFIG_ESP32_WIFI_MGMT_SBUF_NUM CONFIG_ESP_WIFI_MGMT_SBUF_NUM +#define CONFIG_ESP32_WIFI_NVS_ENABLED CONFIG_ESP_WIFI_NVS_ENABLED +#define CONFIG_ESP32_WIFI_RX_BA_WIN CONFIG_ESP_WIFI_RX_BA_WIN +#define CONFIG_ESP32_WIFI_RX_IRAM_OPT CONFIG_ESP_WIFI_RX_IRAM_OPT +#define CONFIG_ESP32_WIFI_SOFTAP_BEACON_MAX_LEN CONFIG_ESP_WIFI_SOFTAP_BEACON_MAX_LEN +#define CONFIG_ESP32_WIFI_STATIC_RX_BUFFER_NUM CONFIG_ESP_WIFI_STATIC_RX_BUFFER_NUM +#define CONFIG_ESP32_WIFI_SW_COEXIST_ENABLE CONFIG_ESP_COEX_SW_COEXIST_ENABLE +#define CONFIG_ESP32_WIFI_TX_BA_WIN CONFIG_ESP_WIFI_TX_BA_WIN +#define CONFIG_ESP32_WIFI_TX_BUFFER_TYPE CONFIG_ESP_WIFI_TX_BUFFER_TYPE +#define CONFIG_ESP_GRATUITOUS_ARP CONFIG_LWIP_ESP_GRATUITOUS_ARP +#define CONFIG_ESP_SYSTEM_PM_POWER_DOWN_CPU CONFIG_PM_POWER_DOWN_CPU_IN_LIGHT_SLEEP +#define CONFIG_ESP_TASK_WDT CONFIG_ESP_TASK_WDT_INIT +#define CONFIG_ESP_WIFI_SW_COEXIST_ENABLE CONFIG_ESP_COEX_SW_COEXIST_ENABLE +#define CONFIG_FLASHMODE_DIO CONFIG_ESPTOOLPY_FLASHMODE_DIO +#define CONFIG_GARP_TMR_INTERVAL CONFIG_LWIP_GARP_TMR_INTERVAL +#define CONFIG_INT_WDT CONFIG_ESP_INT_WDT +#define CONFIG_INT_WDT_TIMEOUT_MS CONFIG_ESP_INT_WDT_TIMEOUT_MS +#define CONFIG_IPC_TASK_STACK_SIZE CONFIG_ESP_IPC_TASK_STACK_SIZE +#define CONFIG_LOG_BOOTLOADER_LEVEL CONFIG_BOOTLOADER_LOG_LEVEL +#define CONFIG_LOG_BOOTLOADER_LEVEL_INFO CONFIG_BOOTLOADER_LOG_LEVEL_INFO +#define CONFIG_MAIN_TASK_STACK_SIZE CONFIG_ESP_MAIN_TASK_STACK_SIZE +#define CONFIG_MONITOR_BAUD CONFIG_ESPTOOLPY_MONITOR_BAUD +#define CONFIG_OPTIMIZATION_ASSERTIONS_ENABLED CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_ENABLE +#define CONFIG_OPTIMIZATION_ASSERTION_LEVEL CONFIG_COMPILER_OPTIMIZATION_ASSERTION_LEVEL +#define CONFIG_OPTIMIZATION_LEVEL_RELEASE CONFIG_COMPILER_OPTIMIZATION_SIZE +#define CONFIG_POST_EVENTS_FROM_IRAM_ISR CONFIG_ESP_EVENT_POST_FROM_IRAM_ISR +#define CONFIG_POST_EVENTS_FROM_ISR CONFIG_ESP_EVENT_POST_FROM_ISR +#define CONFIG_SEMIHOSTFS_MAX_MOUNT_POINTS CONFIG_VFS_SEMIHOSTFS_MAX_MOUNT_POINTS +#define CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ABORTS CONFIG_SPI_FLASH_DANGEROUS_WRITE_ABORTS +#define CONFIG_STACK_CHECK_NONE CONFIG_COMPILER_STACK_CHECK_MODE_NONE +#define CONFIG_SUPPORT_TERMIOS CONFIG_VFS_SUPPORT_TERMIOS +#define CONFIG_SUPPRESS_SELECT_DEBUG_OUTPUT CONFIG_VFS_SUPPRESS_SELECT_DEBUG_OUTPUT +#define CONFIG_SW_COEXIST_ENABLE CONFIG_ESP_COEX_SW_COEXIST_ENABLE +#define CONFIG_SYSTEM_EVENT_QUEUE_SIZE CONFIG_ESP_SYSTEM_EVENT_QUEUE_SIZE +#define CONFIG_SYSTEM_EVENT_TASK_STACK_SIZE CONFIG_ESP_SYSTEM_EVENT_TASK_STACK_SIZE +#define CONFIG_TASK_WDT CONFIG_ESP_TASK_WDT_INIT +#define CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU0 CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU0 +#define CONFIG_TASK_WDT_TIMEOUT_S CONFIG_ESP_TASK_WDT_TIMEOUT_S +#define CONFIG_TCPIP_RECVMBOX_SIZE CONFIG_LWIP_TCPIP_RECVMBOX_SIZE +#define CONFIG_TCPIP_TASK_AFFINITY CONFIG_LWIP_TCPIP_TASK_AFFINITY +#define CONFIG_TCPIP_TASK_AFFINITY_NO_AFFINITY CONFIG_LWIP_TCPIP_TASK_AFFINITY_NO_AFFINITY +#define CONFIG_TCPIP_TASK_STACK_SIZE CONFIG_LWIP_TCPIP_TASK_STACK_SIZE +#define CONFIG_TCP_MAXRTX CONFIG_LWIP_TCP_MAXRTX +#define CONFIG_TCP_MSL CONFIG_LWIP_TCP_MSL +#define CONFIG_TCP_MSS CONFIG_LWIP_TCP_MSS +#define CONFIG_TCP_OVERSIZE_MSS CONFIG_LWIP_TCP_OVERSIZE_MSS +#define CONFIG_TCP_QUEUE_OOSEQ CONFIG_LWIP_TCP_QUEUE_OOSEQ +#define CONFIG_TCP_RECVMBOX_SIZE CONFIG_LWIP_TCP_RECVMBOX_SIZE +#define CONFIG_TCP_SND_BUF_DEFAULT CONFIG_LWIP_TCP_SND_BUF_DEFAULT +#define CONFIG_TCP_SYNMAXRTX CONFIG_LWIP_TCP_SYNMAXRTX +#define CONFIG_TCP_WND_DEFAULT CONFIG_LWIP_TCP_WND_DEFAULT +#define CONFIG_TIMER_QUEUE_LENGTH CONFIG_FREERTOS_TIMER_QUEUE_LENGTH +#define CONFIG_TIMER_TASK_PRIORITY CONFIG_FREERTOS_TIMER_TASK_PRIORITY +#define CONFIG_TIMER_TASK_STACK_DEPTH CONFIG_FREERTOS_TIMER_TASK_STACK_DEPTH +#define CONFIG_TIMER_TASK_STACK_SIZE CONFIG_ESP_TIMER_TASK_STACK_SIZE +#define CONFIG_UDP_RECVMBOX_SIZE CONFIG_LWIP_UDP_RECVMBOX_SIZE +#define CONFIG_WPA_MBEDTLS_CRYPTO CONFIG_ESP_WIFI_MBEDTLS_CRYPTO diff --git a/espradio/blobs/headers/esp32h2/esp_bt.h b/espradio/blobs/headers/esp32h2/esp_bt.h new file mode 100644 index 000000000..58114cb52 --- /dev/null +++ b/espradio/blobs/headers/esp32h2/esp_bt.h @@ -0,0 +1,437 @@ +/* + * SPDX-FileCopyrightText: 2015-2023 Espressif Systems (Shanghai) CO LTD + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#ifndef __ESP_BT_H__ +#define __ESP_BT_H__ + +#include +#include +#include "esp_err.h" +#include "sdkconfig.h" + +#include "nimble/nimble_npl.h" + +#ifdef CONFIG_BT_LE_HCI_INTERFACE_USE_UART +#include "driver/uart.h" +#endif + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * @brief Bluetooth mode for controller enable/disable. + */ +typedef enum { + ESP_BT_MODE_IDLE = 0x00, /*!< Bluetooth is not running */ + ESP_BT_MODE_BLE = 0x01, /*!< Run BLE mode */ + ESP_BT_MODE_CLASSIC_BT = 0x02, /*!< Run Classic BT mode */ + ESP_BT_MODE_BTDM = 0x03, /*!< Run dual mode */ +} esp_bt_mode_t; + +/** + * @brief Bluetooth controller enable/disable/initialised/de-initialised status. + */ +typedef enum { + ESP_BT_CONTROLLER_STATUS_IDLE = 0, /*!< Controller is in idle state */ + ESP_BT_CONTROLLER_STATUS_INITED, /*!< Controller is in initialising state */ + ESP_BT_CONTROLLER_STATUS_ENABLED, /*!< Controller is in enabled state */ + ESP_BT_CONTROLLER_STATUS_NUM, /*!< Controller is in disabled state */ +} esp_bt_controller_status_t; + +/** + * @brief BLE tx power type + * ESP_BLE_PWR_TYPE_CONN_HDL0-8: for each connection, and only be set after connection completed. + * when disconnect, the correspond TX power is not effected. + * ESP_BLE_PWR_TYPE_ADV : for advertising/scan response. + * ESP_BLE_PWR_TYPE_SCAN : for scan. + * ESP_BLE_PWR_TYPE_DEFAULT : if each connection's TX power is not set, it will use this default value. + * if neither in scan mode nor in adv mode, it will use this default value. + * If none of power type is set, system will use ESP_PWR_LVL_P3 as default for ADV/SCAN/CONN0-9. + */ +typedef enum { + ESP_BLE_PWR_TYPE_CONN_HDL0 = 0, /*!< For connection handle 0 */ + ESP_BLE_PWR_TYPE_CONN_HDL1 = 1, /*!< For connection handle 1 */ + ESP_BLE_PWR_TYPE_CONN_HDL2 = 2, /*!< For connection handle 2 */ + ESP_BLE_PWR_TYPE_CONN_HDL3 = 3, /*!< For connection handle 3 */ + ESP_BLE_PWR_TYPE_CONN_HDL4 = 4, /*!< For connection handle 4 */ + ESP_BLE_PWR_TYPE_CONN_HDL5 = 5, /*!< For connection handle 5 */ + ESP_BLE_PWR_TYPE_CONN_HDL6 = 6, /*!< For connection handle 6 */ + ESP_BLE_PWR_TYPE_CONN_HDL7 = 7, /*!< For connection handle 7 */ + ESP_BLE_PWR_TYPE_CONN_HDL8 = 8, /*!< For connection handle 8 */ + ESP_BLE_PWR_TYPE_ADV = 9, /*!< For advertising */ + ESP_BLE_PWR_TYPE_SCAN = 10, /*!< For scan */ + ESP_BLE_PWR_TYPE_DEFAULT = 11, /*!< For default, if not set other, it will use default value */ + ESP_BLE_PWR_TYPE_NUM = 12, /*!< TYPE numbers */ +} esp_ble_power_type_t; + +/** + * @brief Bluetooth TX power level(index), it's just a index corresponding to power(dbm). + */ +typedef enum { + ESP_PWR_LVL_N24 = 0, /*!< Corresponding to -24dbm */ + ESP_PWR_LVL_N21 = 1, /*!< Corresponding to -21dbm */ + ESP_PWR_LVL_N18 = 2, /*!< Corresponding to -18dbm */ + ESP_PWR_LVL_N15 = 3, /*!< Corresponding to -15dbm */ + ESP_PWR_LVL_N12 = 4, /*!< Corresponding to -12dbm */ + ESP_PWR_LVL_N9 = 5, /*!< Corresponding to -9dbm */ + ESP_PWR_LVL_N6 = 6, /*!< Corresponding to -6dbm */ + ESP_PWR_LVL_N3 = 7, /*!< Corresponding to -3dbm */ + ESP_PWR_LVL_N0 = 8, /*!< Corresponding to 0dbm */ + ESP_PWR_LVL_P3 = 9, /*!< Corresponding to +3dbm */ + ESP_PWR_LVL_P6 = 10, /*!< Corresponding to +6dbm */ + ESP_PWR_LVL_P9 = 11, /*!< Corresponding to +9dbm */ + ESP_PWR_LVL_P12 = 12, /*!< Corresponding to +12dbm */ + ESP_PWR_LVL_P15 = 13, /*!< Corresponding to +15dbm */ + ESP_PWR_LVL_P16 = 14, /*!< Corresponding to +18dbm, this enum variable has been deprecated */ + ESP_PWR_LVL_P17 = 14, /*!< Corresponding to +18dbm, this enum variable has been deprecated */ + ESP_PWR_LVL_P18 = 14, /*!< Corresponding to +18dbm */ + ESP_PWR_LVL_P19 = 15, /*!< Corresponding to +20dbm, this enum variable has been deprecated */ + ESP_PWR_LVL_P20 = 15, /*!< Corresponding to +20dbm */ + ESP_PWR_LVL_INVALID = 0xFF, /*!< Indicates an invalid value */ +} esp_power_level_t; + +/** + * @brief The enhanced type of which tx power, could set Advertising/Connection/Default and etc. + */ +typedef enum { + ESP_BLE_ENHANCED_PWR_TYPE_DEFAULT = 0, + ESP_BLE_ENHANCED_PWR_TYPE_ADV, + ESP_BLE_ENHANCED_PWR_TYPE_SCAN, + ESP_BLE_ENHANCED_PWR_TYPE_INIT, + ESP_BLE_ENHANCED_PWR_TYPE_CONN, + ESP_BLE_ENHANCED_PWR_TYPE_MAX, +} esp_ble_enhanced_power_type_t; + +/** + * @brief Address type and address value. + */ +typedef struct { + uint8_t type; /*!< Type of the Bluetooth address (public, random, etc.) */ + uint8_t val[6]; /*!< Array containing the 6-byte Bluetooth address value */ +} esp_ble_addr_t; + +/** + * @brief Select buffers +*/ +typedef enum { + ESP_BLE_LOG_BUF_HCI = 0x02, + ESP_BLE_LOG_BUF_CONTROLLER = 0x05, +} esp_ble_log_buf_t; + +/** + * @brief Set BLE TX power + * Connection Tx power should only be set after connection created. + * @param power_type : The type of which tx power, could set Advertising/Connection/Default and etc + * @param power_level: Power level(index) corresponding to absolute value(dbm) + * @return ESP_OK - success, other - failed + */ +esp_err_t esp_ble_tx_power_set(esp_ble_power_type_t power_type, esp_power_level_t power_level); + +/** + * @brief Get BLE TX power + * Connection Tx power should only be get after connection created. + * @param power_type : The type of which tx power, could set Advertising/Connection/Default and etc + * @return >= 0 - Power level, < 0 - Invalid + */ +esp_power_level_t esp_ble_tx_power_get(esp_ble_power_type_t power_type); + +/** + * @brief ENHANCED API for Setting BLE TX power + * Connection Tx power should only be set after connection created. + * @param power_type : The enhanced type of which tx power, could set Advertising/Connection/Default and etc + * @param handle : The handle of Advertising or Connection and the value 0 for other enhanced power types. + * @param power_level: Power level(index) corresponding to absolute value(dbm) + * @return ESP_OK - success, other - failed + */ +esp_err_t esp_ble_tx_power_set_enhanced(esp_ble_enhanced_power_type_t power_type, uint16_t handle, esp_power_level_t power_level); + +/** + * @brief ENHANCED API of Getting BLE TX power + * Connection Tx power should only be get after connection created. + * @param power_type : The enhanced type of which tx power, could set Advertising/Connection/Default and etc + * @param handle : The handle of Advertising or Connection and the value 0 for other enhanced power types. + * @return >= 0 - Power level, < 0 - Invalid + */ +esp_power_level_t esp_ble_tx_power_get_enhanced(esp_ble_enhanced_power_type_t power_type, uint16_t handle); + +#define CONFIG_VERSION 0x20231124 +#define CONFIG_MAGIC 0x5A5AA5A5 + +/** + * @brief Controller config options, depend on config mask. + * Config mask indicate which functions enabled, this means + * some options or parameters of some functions enabled by config mask. + */ +typedef struct { + uint32_t config_version; /*!< Version number of the defined structure */ + uint16_t ble_ll_resolv_list_size; /*!< Size of the resolvable private address list */ + uint16_t ble_hci_evt_hi_buf_count; /*!< Count of high buffers for HCI events */ + uint16_t ble_hci_evt_lo_buf_count; /*!< Count of low buffers for HCI events */ + uint8_t ble_ll_sync_list_cnt; /*!< Number of synchronization lists */ + uint8_t ble_ll_sync_cnt; /*!< Number of synchronizations */ + uint16_t ble_ll_rsp_dup_list_count; /*!< Count of duplicated lists for scan response packets */ + uint16_t ble_ll_adv_dup_list_count; /*!< Count of duplicated lists for advertising packets */ + uint8_t ble_ll_tx_pwr_dbm; /*!< Tx power (transmit power) in dBm */ + uint64_t rtc_freq; /*!< Frequency of RTC (Real-Time Clock) */ + uint16_t ble_ll_sca; /*!< Sleep Clock Accuracy (SCA) parameter */ + uint8_t ble_ll_scan_phy_number; /*!< Number of PHYs supported for scanning */ + uint16_t ble_ll_conn_def_auth_pyld_tmo; /*!< Connection default authentication payload timeout */ + uint8_t ble_ll_jitter_usecs; /*!< Jitter time in microseconds */ + uint16_t ble_ll_sched_max_adv_pdu_usecs; /*!< Maximum time in microseconds for advertising PDU scheduling */ + uint16_t ble_ll_sched_direct_adv_max_usecs; /*!< Maximum time in microseconds for directed advertising scheduling */ + uint16_t ble_ll_sched_adv_max_usecs; /*!< Maximum time in microseconds for advertising scheduling */ + uint16_t ble_scan_rsp_data_max_len; /*!< Maximum length of scan response data */ + uint8_t ble_ll_cfg_num_hci_cmd_pkts; /*!< Number of HCI command packets that can be queued */ + uint32_t ble_ll_ctrl_proc_timeout_ms; /*!< Control processing timeout in milliseconds */ + uint16_t nimble_max_connections; /*!< Maximum number of connections supported */ + uint8_t ble_whitelist_size; /*!< Size of the white list */ + uint16_t ble_acl_buf_size; /*!< Buffer size of ACL (Asynchronous Connection-Less) data */ + uint16_t ble_acl_buf_count; /*!< Buffer count of ACL data */ + uint16_t ble_hci_evt_buf_size; /*!< Buffer size for HCI event data */ + uint16_t ble_multi_adv_instances; /*!< Number of advertising instances */ + uint16_t ble_ext_adv_max_size; /*!< Maximum size of extended advertising data */ + uint16_t controller_task_stack_size; /*!< Size of Bluetooth controller task stack */ + uint8_t controller_task_prio; /*!< Priority of the Bluetooth task */ + uint8_t controller_run_cpu; /*!< CPU number on which the Bluetooth controller task runs */ + uint8_t enable_qa_test; /*!< Enable for QA test */ + uint8_t enable_bqb_test; /*!< Enable for BQB test */ + uint8_t enable_uart_hci; /*!< Enable UART for HCI (Host Controller Interface) */ + uint8_t ble_hci_uart_port; /*!< Port of UART for HCI */ + uint32_t ble_hci_uart_baud; /*!< Baudrate of UART for HCI */ + uint8_t ble_hci_uart_data_bits; /*!< Data bits of UART for HCI */ + uint8_t ble_hci_uart_stop_bits; /*!< Stop bits of UART for HCI */ + uint8_t ble_hci_uart_flow_ctrl; /*!< Flow control of UART for HCI */ + uint8_t ble_hci_uart_uart_parity; /*!< UART parity */ + uint8_t enable_tx_cca; /*!< Enable Clear Channel Assessment (CCA) when transmitting */ + uint8_t cca_rssi_thresh; /*!< RSSI threshold for CCA */ + uint8_t sleep_en; /*!< Enable sleep functionality */ + uint8_t coex_phy_coded_tx_rx_time_limit; /*!< Coexistence PHY coded TX and RX time limit */ + uint8_t dis_scan_backoff; /*!< Disable scan backoff */ + uint8_t ble_scan_classify_filter_enable; /*!< Enable classification filter for BLE scan */ + uint8_t cca_drop_mode; /*!< CCA drop mode */ + int8_t cca_low_tx_pwr; /*!< Low TX power setting for CCA */ + uint8_t main_xtal_freq; /*!< Main crystal frequency */ + uint8_t cpu_freq_mhz; /*!< CPU frequency in megahertz */ + uint8_t ignore_wl_for_direct_adv; /*!< Ignore the white list for directed advertising */ + uint8_t enable_pcl; /*!< Enable power control */ + uint8_t csa2_select; /*!< Select CSA#2*/ + uint32_t config_magic; /*!< Configuration magic value */ +} esp_bt_controller_config_t; + + +#define BT_CONTROLLER_INIT_CONFIG_DEFAULT() { \ + .config_version = CONFIG_VERSION, \ + .ble_ll_resolv_list_size = CONFIG_BT_LE_LL_RESOLV_LIST_SIZE, \ + .ble_hci_evt_hi_buf_count = DEFAULT_BT_LE_HCI_EVT_HI_BUF_COUNT, \ + .ble_hci_evt_lo_buf_count = DEFAULT_BT_LE_HCI_EVT_LO_BUF_COUNT, \ + .ble_ll_sync_list_cnt = DEFAULT_BT_LE_MAX_PERIODIC_ADVERTISER_LIST, \ + .ble_ll_sync_cnt = DEFAULT_BT_LE_MAX_PERIODIC_SYNCS, \ + .ble_ll_rsp_dup_list_count = CONFIG_BT_LE_LL_DUP_SCAN_LIST_COUNT, \ + .ble_ll_adv_dup_list_count = CONFIG_BT_LE_LL_DUP_SCAN_LIST_COUNT, \ + .ble_ll_tx_pwr_dbm = BLE_LL_TX_PWR_DBM_N, \ + .rtc_freq = RTC_FREQ_N, \ + .ble_ll_sca = CONFIG_BT_LE_LL_SCA, \ + .ble_ll_scan_phy_number = BLE_LL_SCAN_PHY_NUMBER_N, \ + .ble_ll_conn_def_auth_pyld_tmo = BLE_LL_CONN_DEF_AUTH_PYLD_TMO_N, \ + .ble_ll_jitter_usecs = BLE_LL_JITTER_USECS_N, \ + .ble_ll_sched_max_adv_pdu_usecs = BLE_LL_SCHED_MAX_ADV_PDU_USECS_N, \ + .ble_ll_sched_direct_adv_max_usecs = BLE_LL_SCHED_DIRECT_ADV_MAX_USECS_N, \ + .ble_ll_sched_adv_max_usecs = BLE_LL_SCHED_ADV_MAX_USECS_N, \ + .ble_scan_rsp_data_max_len = DEFAULT_BT_LE_SCAN_RSP_DATA_MAX_LEN_N, \ + .ble_ll_cfg_num_hci_cmd_pkts = BLE_LL_CFG_NUM_HCI_CMD_PKTS_N, \ + .ble_ll_ctrl_proc_timeout_ms = BLE_LL_CTRL_PROC_TIMEOUT_MS_N, \ + .nimble_max_connections = DEFAULT_BT_LE_MAX_CONNECTIONS, \ + .ble_whitelist_size = DEFAULT_BT_NIMBLE_WHITELIST_SIZE, \ + .ble_acl_buf_size = DEFAULT_BT_LE_ACL_BUF_SIZE, \ + .ble_acl_buf_count = DEFAULT_BT_LE_ACL_BUF_COUNT, \ + .ble_hci_evt_buf_size = DEFAULT_BT_LE_HCI_EVT_BUF_SIZE, \ + .ble_multi_adv_instances = DEFAULT_BT_LE_MAX_EXT_ADV_INSTANCES, \ + .ble_ext_adv_max_size = DEFAULT_BT_LE_EXT_ADV_MAX_SIZE, \ + .controller_task_stack_size = NIMBLE_LL_STACK_SIZE, \ + .controller_task_prio = ESP_TASK_BT_CONTROLLER_PRIO, \ + .controller_run_cpu = 0, \ + .enable_qa_test = RUN_QA_TEST, \ + .enable_bqb_test = RUN_BQB_TEST, \ + .enable_uart_hci = HCI_UART_EN, \ + .ble_hci_uart_port = DEFAULT_BT_LE_HCI_UART_PORT, \ + .ble_hci_uart_baud = DEFAULT_BT_LE_HCI_UART_BAUD, \ + .ble_hci_uart_data_bits = DEFAULT_BT_LE_HCI_UART_DATA_BITS, \ + .ble_hci_uart_stop_bits = DEFAULT_BT_LE_HCI_UART_STOP_BITS, \ + .ble_hci_uart_flow_ctrl = DEFAULT_BT_LE_HCI_UART_FLOW_CTRL, \ + .ble_hci_uart_uart_parity = DEFAULT_BT_LE_HCI_UART_PARITY, \ + .enable_tx_cca = DEFAULT_BT_LE_TX_CCA_ENABLED, \ + .cca_rssi_thresh = 256 - DEFAULT_BT_LE_CCA_RSSI_THRESH, \ + .sleep_en = NIMBLE_SLEEP_ENABLE, \ + .coex_phy_coded_tx_rx_time_limit = DEFAULT_BT_LE_COEX_PHY_CODED_TX_RX_TLIM_EFF, \ + .dis_scan_backoff = NIMBLE_DISABLE_SCAN_BACKOFF, \ + .ble_scan_classify_filter_enable = 1, \ + .main_xtal_freq = CONFIG_XTAL_FREQ, \ + .cpu_freq_mhz = CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ, \ + .ignore_wl_for_direct_adv = 0, \ + .enable_pcl = 0, \ + .csa2_select = DEFAULT_BT_LE_50_FEATURE_SUPPORT, \ + .config_magic = CONFIG_MAGIC, \ +} + +/** + * @brief Initialize BT controller to allocate task and other resource. + * This function should be called only once, before any other BT functions are called. + * @param cfg: Initial configuration of BT controller. + * @return ESP_OK - success, other - failed + */ +esp_err_t esp_bt_controller_init(esp_bt_controller_config_t *cfg); + +/** + * @brief Get BT controller is initialised/de-initialised/enabled/disabled + * @return status value + */ +esp_bt_controller_status_t esp_bt_controller_get_status(void); + +/** + * @brief Get BLE TX power + * Connection Tx power should only be get after connection created. + * @param power_type : The type of which tx power, could set Advertising/Connection/Default and etc + * @return >= 0 - Power level, < 0 - Invalid + */ +esp_power_level_t esp_ble_tx_power_get(esp_ble_power_type_t power_type); + +/** + * @brief De-initialize BT controller to free resource and delete task. + * You should stop advertising and scanning, as well as + * disconnect all existing connections before de-initializing BT controller. + * + * This function should be called only once, after any other BT functions are called. + * This function is not whole completed, esp_bt_controller_init cannot called after this function. + * @return ESP_OK - success, other - failed + */ +esp_err_t esp_bt_controller_deinit(void); + +/** + * @brief Enable BT controller. + * Due to a known issue, you cannot call esp_bt_controller_enable() a second time + * to change the controller mode dynamically. To change controller mode, call + * esp_bt_controller_disable() and then call esp_bt_controller_enable() with the new mode. + * @param mode : the mode(BLE/BT/BTDM) to enable. For compatible of API, retain this argument. + * @return ESP_OK - success, other - failed + */ +esp_err_t esp_bt_controller_enable(esp_bt_mode_t mode); + +/** + * @brief Disable BT controller + * @return ESP_OK - success, other - failed + */ +esp_err_t esp_bt_controller_disable(void); + +/** @brief esp_vhci_host_callback + * used for vhci call host function to notify what host need to do + */ +typedef struct esp_vhci_host_callback { + void (*notify_host_send_available)(void); /*!< callback used to notify that the host can send packet to controller */ + int (*notify_host_recv)(uint8_t *data, uint16_t len); /*!< callback used to notify that the controller has a packet to send to the host*/ +} esp_vhci_host_callback_t; + +/** @brief esp_vhci_host_check_send_available + * used for check actively if the host can send packet to controller or not. + * @return true for ready to send, false means cannot send packet + */ +bool esp_vhci_host_check_send_available(void); + +/** @brief esp_vhci_host_send_packet + * host send packet to controller + * + * Should not call this function from within a critical section + * or when the scheduler is suspended. + * + * @param data the packet point + * @param len the packet length + */ +void esp_vhci_host_send_packet(uint8_t *data, uint16_t len); + +/** @brief esp_vhci_host_register_callback + * register the vhci reference callback + * struct defined by vhci_host_callback structure. + * @param callback esp_vhci_host_callback type variable + * @return ESP_OK - success, ESP_FAIL - failed + */ +esp_err_t esp_vhci_host_register_callback(const esp_vhci_host_callback_t *callback); + +/** @brief esp_bt_controller_mem_release + * release the controller memory as per the mode + * + * This function releases the BSS, data and other sections of the controller to heap. The total size is about 70k bytes. + * + * esp_bt_controller_mem_release(mode) should be called only before esp_bt_controller_init() + * or after esp_bt_controller_deinit(). + * + * Note that once BT controller memory is released, the process cannot be reversed. It means you cannot use the bluetooth + * mode which you have released by this function. + * + * If your firmware will later upgrade the Bluetooth controller mode (BLE -> BT Classic or disabled -> enabled) + * then do not call this function. + * + * If the app calls esp_bt_controller_enable(ESP_BT_MODE_BLE) to use BLE only then it is safe to call + * esp_bt_controller_mem_release(ESP_BT_MODE_CLASSIC_BT) at initialization time to free unused BT Classic memory. + * + * If the mode is ESP_BT_MODE_BTDM, then it may be useful to call API esp_bt_mem_release(ESP_BT_MODE_BTDM) instead, + * which internally calls esp_bt_controller_mem_release(ESP_BT_MODE_BTDM) and additionally releases the BSS and data + * consumed by the BT/BLE host stack to heap. For more details about usage please refer to the documentation of + * esp_bt_mem_release() function + * + * @param mode : the mode want to release memory + * @return ESP_OK - success, other - failed + */ +esp_err_t esp_bt_controller_mem_release(esp_bt_mode_t mode); + +/** @brief esp_bt_mem_release + * release controller memory and BSS and data section of the BT/BLE host stack as per the mode + * + * This function first releases controller memory by internally calling esp_bt_controller_mem_release(). + * Additionally, if the mode is set to ESP_BT_MODE_BTDM, it also releases the BSS and data consumed by the BT/BLE host stack to heap + * + * Note that once BT memory is released, the process cannot be reversed. It means you cannot use the bluetooth + * mode which you have released by this function. + * + * If your firmware will later upgrade the Bluetooth controller mode (BLE -> BT Classic or disabled -> enabled) + * then do not call this function. + * + * If you never intend to use bluetooth in a current boot-up cycle, you can call esp_bt_mem_release(ESP_BT_MODE_BTDM) + * before esp_bt_controller_init or after esp_bt_controller_deinit. + * + * For example, if a user only uses bluetooth for setting the WiFi configuration, and does not use bluetooth in the rest of the product operation". + * In such cases, after receiving the WiFi configuration, you can disable/deinit bluetooth and release its memory. + * Below is the sequence of APIs to be called for such scenarios: + * + * esp_bluedroid_disable(); + * esp_bluedroid_deinit(); + * esp_bt_controller_disable(); + * esp_bt_controller_deinit(); + * esp_bt_mem_release(ESP_BT_MODE_BTDM); + * + * @param mode : the mode whose memory is to be released + * @return ESP_OK - success, other - failed + */ +esp_err_t esp_bt_mem_release(esp_bt_mode_t mode); + +/** + * @brief Returns random static address or -1 if not present. + * @return ESP_OK - success, other - failed + */ +extern int esp_ble_hw_get_static_addr(esp_ble_addr_t *addr); + +#if CONFIG_BT_LE_CONTROLLER_LOG_ENABLED +/** + * @brief dump all log information cached in buffers. + * @param output : true for log dump, false will take no effect + */ +void esp_ble_controller_log_dump_all(bool output); +#endif // CONFIG_BT_LE_CONTROLLER_LOG_ENABLED + +#ifdef __cplusplus +} +#endif + +#endif /* __ESP_BT_H__ */ diff --git a/espradio/blobs/headers/esp32h2/phy_init_data.h b/espradio/blobs/headers/esp32h2/phy_init_data.h new file mode 100644 index 000000000..f5c2bdc8a --- /dev/null +++ b/espradio/blobs/headers/esp32h2/phy_init_data.h @@ -0,0 +1,22 @@ +/* + * SPDX-FileCopyrightText: 2016-2022 Espressif Systems (Shanghai) CO LTD + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#ifndef PHY_INIT_DATA_H +#define PHY_INIT_DATA_H /* don't use #pragma once here, we compile this file sometimes */ +#include "esp_phy_init.h" +#include "sdkconfig.h" + +#ifdef __cplusplus +extern "C" { +#endif + +// There is no init data for ESP32H2 right now, could be added when necessary. + +#ifdef __cplusplus +} +#endif + +#endif /* PHY_INIT_DATA_H */ diff --git a/espradio/blobs/headers/esp32h2/sdkconfig.h b/espradio/blobs/headers/esp32h2/sdkconfig.h new file mode 100644 index 000000000..68d51b07e --- /dev/null +++ b/espradio/blobs/headers/esp32h2/sdkconfig.h @@ -0,0 +1,988 @@ +/* + * Automatically generated file. DO NOT EDIT. + * Espressif IoT Development Framework (ESP-IDF) 5.1.2 Configuration Header + */ +#pragma once +#define CONFIG_SOC_ADC_SUPPORTED 1 +#define CONFIG_SOC_ANA_CMPR_SUPPORTED 1 +#define CONFIG_SOC_DEDICATED_GPIO_SUPPORTED 1 +#define CONFIG_SOC_UART_SUPPORTED 1 +#define CONFIG_SOC_GDMA_SUPPORTED 1 +#define CONFIG_SOC_ASYNC_MEMCPY_SUPPORTED 1 +#define CONFIG_SOC_PCNT_SUPPORTED 1 +#define CONFIG_SOC_MCPWM_SUPPORTED 1 +#define CONFIG_SOC_TWAI_SUPPORTED 1 +#define CONFIG_SOC_BT_SUPPORTED 1 +#define CONFIG_SOC_GPTIMER_SUPPORTED 1 +#define CONFIG_SOC_IEEE802154_SUPPORTED 1 +#define CONFIG_SOC_IEEE802154_BLE_ONLY 1 +#define CONFIG_SOC_USB_SERIAL_JTAG_SUPPORTED 1 +#define CONFIG_SOC_TEMP_SENSOR_SUPPORTED 1 +#define CONFIG_SOC_SUPPORTS_SECURE_DL_MODE 1 +#define CONFIG_SOC_EFUSE_KEY_PURPOSE_FIELD 1 +#define CONFIG_SOC_RTC_FAST_MEM_SUPPORTED 1 +#define CONFIG_SOC_RTC_MEM_SUPPORTED 1 +#define CONFIG_SOC_I2S_SUPPORTED 1 +#define CONFIG_SOC_SDM_SUPPORTED 1 +#define CONFIG_SOC_ETM_SUPPORTED 1 +#define CONFIG_SOC_RMT_SUPPORTED 1 +#define CONFIG_SOC_PARLIO_SUPPORTED 1 +#define CONFIG_SOC_GPSPI_SUPPORTED 1 +#define CONFIG_SOC_LEDC_SUPPORTED 1 +#define CONFIG_SOC_I2C_SUPPORTED 1 +#define CONFIG_SOC_SYSTIMER_SUPPORTED 1 +#define CONFIG_SOC_AES_SUPPORTED 1 +#define CONFIG_SOC_MPI_SUPPORTED 1 +#define CONFIG_SOC_SHA_SUPPORTED 1 +#define CONFIG_SOC_HMAC_SUPPORTED 1 +#define CONFIG_SOC_DIG_SIGN_SUPPORTED 1 +#define CONFIG_SOC_ECC_SUPPORTED 1 +#define CONFIG_SOC_ECC_EXTENDED_MODES_SUPPORTED 1 +#define CONFIG_SOC_ECDSA_SUPPORTED 1 +#define CONFIG_SOC_FLASH_ENC_SUPPORTED 1 +#define CONFIG_SOC_SECURE_BOOT_SUPPORTED 1 +#define CONFIG_SOC_BOD_SUPPORTED 1 +#define CONFIG_SOC_APM_SUPPORTED 1 +#define CONFIG_SOC_PMU_SUPPORTED 1 +#define CONFIG_SOC_LP_TIMER_SUPPORTED 1 +#define CONFIG_SOC_LP_AON_SUPPORTED 1 +#define CONFIG_SOC_PAU_SUPPORTED 1 +#define CONFIG_SOC_CLK_TREE_SUPPORTED 1 +#define CONFIG_SOC_XTAL_SUPPORT_32M 1 +#define CONFIG_SOC_AES_SUPPORT_DMA 1 +#define CONFIG_SOC_AES_GDMA 1 +#define CONFIG_SOC_AES_SUPPORT_AES_128 1 +#define CONFIG_SOC_AES_SUPPORT_AES_256 1 +#define CONFIG_SOC_ADC_DIG_CTRL_SUPPORTED 1 +#define CONFIG_SOC_ADC_DIG_IIR_FILTER_SUPPORTED 1 +#define CONFIG_SOC_ADC_MONITOR_SUPPORTED 1 +#define CONFIG_SOC_ADC_DMA_SUPPORTED 1 +#define CONFIG_SOC_ADC_PERIPH_NUM 1 +#define CONFIG_SOC_ADC_MAX_CHANNEL_NUM 5 +#define CONFIG_SOC_ADC_ATTEN_NUM 4 +#define CONFIG_SOC_ADC_DIGI_CONTROLLER_NUM 1 +#define CONFIG_SOC_ADC_PATT_LEN_MAX 8 +#define CONFIG_SOC_ADC_DIGI_MAX_BITWIDTH 12 +#define CONFIG_SOC_ADC_DIGI_MIN_BITWIDTH 12 +#define CONFIG_SOC_ADC_DIGI_IIR_FILTER_NUM 2 +#define CONFIG_SOC_ADC_DIGI_MONITOR_NUM 2 +#define CONFIG_SOC_ADC_DIGI_RESULT_BYTES 4 +#define CONFIG_SOC_ADC_DIGI_DATA_BYTES_PER_CONV 4 +#define CONFIG_SOC_ADC_SAMPLE_FREQ_THRES_HIGH 83333 +#define CONFIG_SOC_ADC_SAMPLE_FREQ_THRES_LOW 611 +#define CONFIG_SOC_ADC_RTC_MIN_BITWIDTH 12 +#define CONFIG_SOC_ADC_RTC_MAX_BITWIDTH 12 +#define CONFIG_SOC_ADC_CALIBRATION_V1_SUPPORTED 1 +#define CONFIG_SOC_ADC_SELF_HW_CALI_SUPPORTED 1 +#define CONFIG_SOC_ADC_CALIB_CHAN_COMPENS_SUPPORTED 1 +#define CONFIG_SOC_ADC_TEMPERATURE_SHARE_INTR 1 +#define CONFIG_SOC_BROWNOUT_RESET_SUPPORTED 1 +#define CONFIG_SOC_SHARED_IDCACHE_SUPPORTED 1 +#define CONFIG_SOC_CACHE_FREEZE_SUPPORTED 1 +#define CONFIG_SOC_CPU_CORES_NUM 1 +#define CONFIG_SOC_CPU_INTR_NUM 32 +#define CONFIG_SOC_CPU_HAS_FLEXIBLE_INTC 1 +#define CONFIG_SOC_INT_PLIC_SUPPORTED 1 +#define CONFIG_SOC_CPU_BREAKPOINTS_NUM 4 +#define CONFIG_SOC_CPU_WATCHPOINTS_NUM 4 +#define CONFIG_SOC_CPU_WATCHPOINT_MAX_REGION_SIZE 0x80000000 +#define CONFIG_SOC_CPU_HAS_PMA 1 +#define CONFIG_SOC_CPU_IDRAM_SPLIT_USING_PMP 1 +#define CONFIG_SOC_MMU_PAGE_SIZE_CONFIGURABLE 1 +#define CONFIG_SOC_MMU_PERIPH_NUM 1 +#define CONFIG_SOC_MMU_LINEAR_ADDRESS_REGION_NUM 1 +#define CONFIG_SOC_MMU_DI_VADDR_SHARED 1 +#define CONFIG_SOC_DS_SIGNATURE_MAX_BIT_LEN 3072 +#define CONFIG_SOC_DS_KEY_PARAM_MD_IV_LENGTH 16 +#define CONFIG_SOC_DS_KEY_CHECK_MAX_WAIT_US 1100 +#define CONFIG_SOC_GDMA_GROUPS 1 +#define CONFIG_SOC_GDMA_PAIRS_PER_GROUP 3 +#define CONFIG_SOC_GDMA_SUPPORT_ETM 1 +#define CONFIG_SOC_ETM_GROUPS 1 +#define CONFIG_SOC_ETM_CHANNELS_PER_GROUP 50 +#define CONFIG_SOC_GPIO_PORT 1 +#define CONFIG_SOC_GPIO_PIN_COUNT 28 +#define CONFIG_SOC_GPIO_SUPPORT_PIN_GLITCH_FILTER 1 +#define CONFIG_SOC_GPIO_SUPPORT_PIN_HYS_FILTER 1 +#define CONFIG_SOC_GPIO_FLEX_GLITCH_FILTER_NUM 8 +#define CONFIG_SOC_GPIO_SUPPORT_ETM 1 +#define CONFIG_SOC_GPIO_ETM_EVENTS_PER_GROUP 8 +#define CONFIG_SOC_GPIO_ETM_TASKS_PER_GROUP 8 +#define CONFIG_SOC_GPIO_SUPPORT_RTC_INDEPENDENT 1 +#define CONFIG_SOC_GPIO_VALID_DIGITAL_IO_PAD_MASK 0x000000000FFF807F +#define CONFIG_SOC_GPIO_SUPPORT_FORCE_HOLD 1 +#define CONFIG_SOC_GPIO_SUPPORT_HOLD_SINGLE_IO_IN_DSLP 1 +#define CONFIG_SOC_RTCIO_PIN_COUNT 8 +#define CONFIG_SOC_RTCIO_HOLD_SUPPORTED 1 +#define CONFIG_SOC_DEDIC_GPIO_OUT_CHANNELS_NUM 8 +#define CONFIG_SOC_DEDIC_GPIO_IN_CHANNELS_NUM 8 +#define CONFIG_SOC_DEDIC_PERIPH_ALWAYS_ENABLE 1 +#define CONFIG_SOC_ANA_CMPR_NUM 1 +#define CONFIG_SOC_I2C_NUM 2 +#define CONFIG_SOC_I2C_FIFO_LEN 32 +#define CONFIG_SOC_I2C_CMD_REG_NUM 8 +#define CONFIG_SOC_I2C_SUPPORT_SLAVE 1 +#define CONFIG_SOC_I2C_SUPPORT_HW_CLR_BUS 1 +#define CONFIG_SOC_I2C_SUPPORT_XTAL 1 +#define CONFIG_SOC_I2C_SUPPORT_RTC 1 +#define CONFIG_SOC_I2S_NUM 1 +#define CONFIG_SOC_I2S_HW_VERSION_2 1 +#define CONFIG_SOC_I2S_SUPPORTS_XTAL 1 +#define CONFIG_SOC_I2S_SUPPORTS_PLL_F96M 1 +#define CONFIG_SOC_I2S_SUPPORTS_PLL_F64M 1 +#define CONFIG_SOC_I2S_SUPPORTS_PCM 1 +#define CONFIG_SOC_I2S_SUPPORTS_PDM 1 +#define CONFIG_SOC_I2S_SUPPORTS_PDM_TX 1 +#define CONFIG_SOC_I2S_PDM_MAX_TX_LINES 2 +#define CONFIG_SOC_I2S_SUPPORTS_TDM 1 +#define CONFIG_SOC_I2S_TDM_FULL_DATA_WIDTH 1 +#define CONFIG_SOC_LEDC_SUPPORT_PLL_DIV_CLOCK 1 +#define CONFIG_SOC_LEDC_SUPPORT_XTAL_CLOCK 1 +#define CONFIG_SOC_LEDC_CHANNEL_NUM 6 +#define CONFIG_SOC_LEDC_TIMER_BIT_WIDTH 20 +#define CONFIG_SOC_LEDC_SUPPORT_FADE_STOP 1 +#define CONFIG_SOC_LEDC_GAMMA_CURVE_FADE_SUPPORTED 1 +#define CONFIG_SOC_LEDC_GAMMA_CURVE_FADE_RANGE_MAX 16 +#define CONFIG_SOC_LEDC_FADE_PARAMS_BIT_WIDTH 10 +#define CONFIG_SOC_MPU_MIN_REGION_SIZE 0x20000000 +#define CONFIG_SOC_MPU_REGIONS_MAX_NUM 8 +#define CONFIG_SOC_PCNT_GROUPS 1 +#define CONFIG_SOC_PCNT_UNITS_PER_GROUP 4 +#define CONFIG_SOC_PCNT_CHANNELS_PER_UNIT 2 +#define CONFIG_SOC_PCNT_THRES_POINT_PER_UNIT 2 +#define CONFIG_SOC_PCNT_SUPPORT_RUNTIME_THRES_UPDATE 1 +#define CONFIG_SOC_RMT_GROUPS 1 +#define CONFIG_SOC_RMT_TX_CANDIDATES_PER_GROUP 2 +#define CONFIG_SOC_RMT_RX_CANDIDATES_PER_GROUP 2 +#define CONFIG_SOC_RMT_CHANNELS_PER_GROUP 4 +#define CONFIG_SOC_RMT_MEM_WORDS_PER_CHANNEL 48 +#define CONFIG_SOC_RMT_SUPPORT_RX_PINGPONG 1 +#define CONFIG_SOC_RMT_SUPPORT_RX_DEMODULATION 1 +#define CONFIG_SOC_RMT_SUPPORT_TX_ASYNC_STOP 1 +#define CONFIG_SOC_RMT_SUPPORT_TX_LOOP_COUNT 1 +#define CONFIG_SOC_RMT_SUPPORT_TX_LOOP_AUTO_STOP 1 +#define CONFIG_SOC_RMT_SUPPORT_TX_SYNCHRO 1 +#define CONFIG_SOC_RMT_SUPPORT_TX_CARRIER_DATA_ONLY 1 +#define CONFIG_SOC_RMT_SUPPORT_XTAL 1 +#define CONFIG_SOC_RMT_SUPPORT_RC_FAST 1 +#define CONFIG_SOC_MCPWM_GROUPS 1 +#define CONFIG_SOC_MCPWM_TIMERS_PER_GROUP 3 +#define CONFIG_SOC_MCPWM_OPERATORS_PER_GROUP 3 +#define CONFIG_SOC_MCPWM_COMPARATORS_PER_OPERATOR 2 +#define CONFIG_SOC_MCPWM_GENERATORS_PER_OPERATOR 2 +#define CONFIG_SOC_MCPWM_TRIGGERS_PER_OPERATOR 2 +#define CONFIG_SOC_MCPWM_GPIO_FAULTS_PER_GROUP 3 +#define CONFIG_SOC_MCPWM_CAPTURE_TIMERS_PER_GROUP 1 +#define CONFIG_SOC_MCPWM_CAPTURE_CHANNELS_PER_TIMER 3 +#define CONFIG_SOC_MCPWM_GPIO_SYNCHROS_PER_GROUP 3 +#define CONFIG_SOC_MCPWM_SWSYNC_CAN_PROPAGATE 1 +#define CONFIG_SOC_MCPWM_SUPPORT_ETM 1 +#define CONFIG_SOC_MCPWM_CAPTURE_CLK_FROM_GROUP 1 +#define CONFIG_SOC_PARLIO_GROUPS 1 +#define CONFIG_SOC_PARLIO_TX_UNITS_PER_GROUP 1 +#define CONFIG_SOC_PARLIO_RX_UNITS_PER_GROUP 1 +#define CONFIG_SOC_PARLIO_TX_UNIT_MAX_DATA_WIDTH 8 +#define CONFIG_SOC_PARLIO_RX_UNIT_MAX_DATA_WIDTH 8 +#define CONFIG_SOC_PARLIO_TX_CLK_SUPPORT_GATING 1 +#define CONFIG_SOC_PARLIO_TRANS_BIT_ALIGN 1 +#define CONFIG_SOC_RSA_MAX_BIT_LEN 3072 +#define CONFIG_SOC_SHA_DMA_MAX_BUFFER_SIZE 3968 +#define CONFIG_SOC_SHA_SUPPORT_DMA 1 +#define CONFIG_SOC_SHA_SUPPORT_RESUME 1 +#define CONFIG_SOC_SHA_GDMA 1 +#define CONFIG_SOC_SHA_SUPPORT_SHA1 1 +#define CONFIG_SOC_SHA_SUPPORT_SHA224 1 +#define CONFIG_SOC_SHA_SUPPORT_SHA256 1 +#define CONFIG_SOC_SDM_GROUPS 1 +#define CONFIG_SOC_SDM_CHANNELS_PER_GROUP 4 +#define CONFIG_SOC_SDM_CLK_SUPPORT_PLL_F48M 1 +#define CONFIG_SOC_SDM_CLK_SUPPORT_XTAL 1 +#define CONFIG_SOC_SPI_PERIPH_NUM 2 +#define CONFIG_SOC_SPI_MAX_CS_NUM 6 +#define CONFIG_SOC_SPI_MAXIMUM_BUFFER_SIZE 64 +#define CONFIG_SOC_SPI_SUPPORT_DDRCLK 1 +#define CONFIG_SOC_SPI_SLAVE_SUPPORT_SEG_TRANS 1 +#define CONFIG_SOC_SPI_SUPPORT_CD_SIG 1 +#define CONFIG_SOC_SPI_SUPPORT_CONTINUOUS_TRANS 1 +#define CONFIG_SOC_SPI_SUPPORT_SLAVE_HD_VER2 1 +#define CONFIG_SOC_SPI_SUPPORT_CLK_XTAL 1 +#define CONFIG_SOC_SPI_SUPPORT_CLK_PLL_F48M 1 +#define CONFIG_SOC_SPI_SUPPORT_CLK_RC_FAST 1 +#define CONFIG_SOC_MEMSPI_IS_INDEPENDENT 1 +#define CONFIG_SOC_SPI_MAX_PRE_DIVIDER 16 +#define CONFIG_SOC_SPI_MEM_SUPPORT_AUTO_WAIT_IDLE 1 +#define CONFIG_SOC_SPI_MEM_SUPPORT_AUTO_SUSPEND 1 +#define CONFIG_SOC_SPI_MEM_SUPPORT_AUTO_RESUME 1 +#define CONFIG_SOC_SPI_MEM_SUPPORT_IDLE_INTR 1 +#define CONFIG_SOC_SPI_MEM_SUPPORT_SW_SUSPEND 1 +#define CONFIG_SOC_SPI_MEM_SUPPORT_CHECK_SUS 1 +#define CONFIG_SOC_SPI_MEM_SUPPORT_WRAP 1 +#define CONFIG_SOC_MEMSPI_SRC_FREQ_64M_SUPPORTED 1 +#define CONFIG_SOC_MEMSPI_SRC_FREQ_32M_SUPPORTED 1 +#define CONFIG_SOC_MEMSPI_SRC_FREQ_16M_SUPPORTED 1 +#define CONFIG_SOC_MEMSPI_CLOCK_IS_INDEPENDENT 1 +#define CONFIG_SOC_SYSTIMER_COUNTER_NUM 2 +#define CONFIG_SOC_SYSTIMER_ALARM_NUM 3 +#define CONFIG_SOC_SYSTIMER_BIT_WIDTH_LO 32 +#define CONFIG_SOC_SYSTIMER_BIT_WIDTH_HI 20 +#define CONFIG_SOC_SYSTIMER_FIXED_DIVIDER 1 +#define CONFIG_SOC_SYSTIMER_SUPPORT_RC_FAST 1 +#define CONFIG_SOC_SYSTIMER_INT_LEVEL 1 +#define CONFIG_SOC_SYSTIMER_ALARM_MISS_COMPENSATE 1 +#define CONFIG_SOC_SYSTIMER_SUPPORT_ETM 1 +#define CONFIG_SOC_LP_TIMER_BIT_WIDTH_LO 32 +#define CONFIG_SOC_LP_TIMER_BIT_WIDTH_HI 16 +#define CONFIG_SOC_TIMER_GROUPS 2 +#define CONFIG_SOC_TIMER_GROUP_TIMERS_PER_GROUP 1 +#define CONFIG_SOC_TIMER_GROUP_COUNTER_BIT_WIDTH 54 +#define CONFIG_SOC_TIMER_GROUP_SUPPORT_XTAL 1 +#define CONFIG_SOC_TIMER_GROUP_SUPPORT_RC_FAST 1 +#define CONFIG_SOC_TIMER_GROUP_TOTAL_TIMERS 2 +#define CONFIG_SOC_TIMER_SUPPORT_ETM 1 +#define CONFIG_SOC_MWDT_SUPPORT_XTAL 1 +#define CONFIG_SOC_TWAI_CONTROLLER_NUM 1 +#define CONFIG_SOC_TWAI_CLK_SUPPORT_XTAL 1 +#define CONFIG_SOC_TWAI_BRP_MIN 2 +#define CONFIG_SOC_TWAI_BRP_MAX 32768 +#define CONFIG_SOC_TWAI_SUPPORTS_RX_STATUS 1 +#define CONFIG_SOC_EFUSE_DIS_PAD_JTAG 1 +#define CONFIG_SOC_EFUSE_DIS_USB_JTAG 1 +#define CONFIG_SOC_EFUSE_DIS_DIRECT_BOOT 1 +#define CONFIG_SOC_EFUSE_SOFT_DIS_JTAG 1 +#define CONFIG_SOC_EFUSE_DIS_ICACHE 1 +#define CONFIG_SOC_EFUSE_BLOCK9_KEY_PURPOSE_QUIRK 1 +#define CONFIG_SOC_EFUSE_ECDSA_USE_HARDWARE_K 1 +#define CONFIG_SOC_SECURE_BOOT_V2_RSA 1 +#define CONFIG_SOC_SECURE_BOOT_V2_ECC 1 +#define CONFIG_SOC_EFUSE_SECURE_BOOT_KEY_DIGESTS 3 +#define CONFIG_SOC_EFUSE_REVOKE_BOOT_KEY_DIGESTS 1 +#define CONFIG_SOC_SUPPORT_SECURE_BOOT_REVOKE_KEY 1 +#define CONFIG_SOC_FLASH_ENCRYPTED_XTS_AES_BLOCK_MAX 32 +#define CONFIG_SOC_FLASH_ENCRYPTION_XTS_AES 1 +#define CONFIG_SOC_FLASH_ENCRYPTION_XTS_AES_128 1 +#define CONFIG_SOC_CRYPTO_DPA_PROTECTION_SUPPORTED 1 +#define CONFIG_SOC_UART_NUM 2 +#define CONFIG_SOC_UART_FIFO_LEN 128 +#define CONFIG_SOC_UART_BITRATE_MAX 5000000 +#define CONFIG_SOC_UART_SUPPORT_RTC_CLK 1 +#define CONFIG_SOC_UART_SUPPORT_XTAL_CLK 1 +#define CONFIG_SOC_UART_SUPPORT_WAKEUP_INT 1 +#define CONFIG_SOC_UART_SUPPORT_FSM_TX_WAIT_SEND 1 +#define CONFIG_SOC_COEX_HW_PTI 1 +#define CONFIG_SOC_EXTERNAL_COEX_ADVANCE 1 +#define CONFIG_SOC_PHY_DIG_REGS_MEM_SIZE 21 +#define CONFIG_SOC_PM_SUPPORT_BT_WAKEUP 1 +#define CONFIG_SOC_PM_SUPPORT_EXT1_WAKEUP 1 +#define CONFIG_SOC_PM_SUPPORT_EXT1_WAKEUP_MODE_PER_PIN 1 +#define CONFIG_SOC_PM_SUPPORT_CPU_PD 1 +#define CONFIG_SOC_PM_SUPPORT_MODEM_PD 1 +#define CONFIG_SOC_PM_SUPPORT_XTAL32K_PD 1 +#define CONFIG_SOC_PM_SUPPORT_RC32K_PD 1 +#define CONFIG_SOC_PM_SUPPORT_RC_FAST_PD 1 +#define CONFIG_SOC_PM_SUPPORT_VDDSDIO_PD 1 +#define CONFIG_SOC_PM_SUPPORT_TOP_PD 1 +#define CONFIG_SOC_PM_PAU_LINK_NUM 4 +#define CONFIG_SOC_PM_CPU_RETENTION_BY_SW 1 +#define CONFIG_SOC_PM_MODEM_RETENTION_BY_REGDMA 1 +#define CONFIG_SOC_PM_SUPPORT_DEEPSLEEP_CHECK_STUB_ONLY 1 +#define CONFIG_SOC_PM_RETENTION_SW_TRIGGER_REGDMA 1 +#define CONFIG_SOC_CLK_RC_FAST_SUPPORT_CALIBRATION 1 +#define CONFIG_SOC_CLK_XTAL32K_SUPPORTED 1 +#define CONFIG_SOC_CLK_OSC_SLOW_SUPPORTED 1 +#define CONFIG_SOC_CLK_RC32K_SUPPORTED 1 +#define CONFIG_SOC_CLK_LP_FAST_SUPPORT_LP_PLL 1 +#define CONFIG_SOC_MODEM_CLOCK_IS_INDEPENDENT 1 +#define CONFIG_SOC_TEMPERATURE_SENSOR_SUPPORT_FAST_RC 1 +#define CONFIG_SOC_TEMPERATURE_SENSOR_SUPPORT_XTAL 1 +#define CONFIG_SOC_TEMPERATURE_SENSOR_INTR_SUPPORT 1 +#define CONFIG_SOC_BLE_SUPPORTED 1 +#define CONFIG_SOC_BLE_MESH_SUPPORTED 1 +#define CONFIG_SOC_ESP_NIMBLE_CONTROLLER 1 +#define CONFIG_SOC_BLE_50_SUPPORTED 1 +#define CONFIG_SOC_BLE_DEVICE_PRIVACY_SUPPORTED 1 +#define CONFIG_SOC_BLE_POWER_CONTROL_SUPPORTED 1 +#define CONFIG_SOC_BLE_MULTI_CONN_OPTIMIZATION 1 +#define CONFIG_SOC_BLE_PERIODIC_ADV_ENH_SUPPORTED 1 +#define CONFIG_IDF_CMAKE 1 +#define CONFIG_IDF_TARGET_ARCH_RISCV 1 +#define CONFIG_IDF_TARGET_ARCH "riscv" +#define CONFIG_IDF_TARGET "esp32h2" +#define CONFIG_IDF_TARGET_ESP32H2 1 +#define CONFIG_IDF_FIRMWARE_CHIP_ID 0x0010 +#define CONFIG_APP_BUILD_TYPE_APP_2NDBOOT 1 +#define CONFIG_APP_BUILD_GENERATE_BINARIES 1 +#define CONFIG_APP_BUILD_BOOTLOADER 1 +#define CONFIG_APP_BUILD_USE_FLASH_SECTIONS 1 +#define CONFIG_BOOTLOADER_OFFSET_IN_FLASH 0x0 +#define CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_SIZE 1 +#define CONFIG_BOOTLOADER_LOG_LEVEL_INFO 1 +#define CONFIG_BOOTLOADER_LOG_LEVEL 3 +#define CONFIG_BOOTLOADER_REGION_PROTECTION_ENABLE 1 +#define CONFIG_BOOTLOADER_WDT_ENABLE 1 +#define CONFIG_BOOTLOADER_WDT_TIME_MS 9000 +#define CONFIG_BOOTLOADER_RESERVE_RTC_SIZE 0x0 +#define CONFIG_BOOTLOADER_FLASH_XMC_SUPPORT 1 +#define CONFIG_SECURE_BOOT_V2_RSA_SUPPORTED 1 +#define CONFIG_SECURE_BOOT_V2_ECC_SUPPORTED 1 +#define CONFIG_SECURE_BOOT_V2_PREFERRED 1 +#define CONFIG_SECURE_ROM_DL_MODE_ENABLED 1 +#define CONFIG_APP_COMPILE_TIME_DATE 1 +#define CONFIG_APP_RETRIEVE_LEN_ELF_SHA 16 +#define CONFIG_ESP_ROM_HAS_CRC_LE 1 +#define CONFIG_ESP_ROM_HAS_CRC_BE 1 +#define CONFIG_ESP_ROM_UART_CLK_IS_XTAL 1 +#define CONFIG_ESP_ROM_USB_SERIAL_DEVICE_NUM 3 +#define CONFIG_ESP_ROM_HAS_RETARGETABLE_LOCKING 1 +#define CONFIG_ESP_ROM_GET_CLK_FREQ 1 +#define CONFIG_ESP_ROM_HAS_HAL_WDT 1 +#define CONFIG_ESP_ROM_HAS_HAL_SYSTIMER 1 +#define CONFIG_ESP_ROM_HAS_HEAP_TLSF 1 +#define CONFIG_ESP_ROM_TLSF_CHECK_PATCH 1 +#define CONFIG_ESP_ROM_HAS_LAYOUT_TABLE 1 +#define CONFIG_ESP_ROM_HAS_SPI_FLASH 1 +#define CONFIG_ESP_ROM_WITHOUT_REGI2C 1 +#define CONFIG_ESP_ROM_HAS_NEWLIB_NANO_FORMAT 1 +#define CONFIG_ESP_ROM_WDT_INIT_PATCH 1 +#define CONFIG_ESP_ROM_NEEDS_SET_CACHE_MMU_SIZE 1 +#define CONFIG_ESP_ROM_RAM_APP_NEEDS_MMU_INIT 1 +#define CONFIG_BOOT_ROM_LOG_ALWAYS_ON 1 +#define CONFIG_ESPTOOLPY_FLASHMODE_DIO 1 +#define CONFIG_ESPTOOLPY_FLASH_SAMPLE_MODE_STR 1 +#define CONFIG_ESPTOOLPY_FLASHMODE "dio" +#define CONFIG_ESPTOOLPY_FLASHFREQ_64M 1 +#define CONFIG_ESPTOOLPY_FLASHFREQ "48m" +#define CONFIG_ESPTOOLPY_FLASHSIZE_2MB 1 +#define CONFIG_ESPTOOLPY_FLASHSIZE "2MB" +#define CONFIG_ESPTOOLPY_BEFORE_RESET 1 +#define CONFIG_ESPTOOLPY_BEFORE "default_reset" +#define CONFIG_ESPTOOLPY_AFTER_RESET 1 +#define CONFIG_ESPTOOLPY_AFTER "hard_reset" +#define CONFIG_ESPTOOLPY_MONITOR_BAUD 115200 +#define CONFIG_PARTITION_TABLE_SINGLE_APP 1 +#define CONFIG_PARTITION_TABLE_CUSTOM_FILENAME "partitions.csv" +#define CONFIG_PARTITION_TABLE_FILENAME "partitions_singleapp.csv" +#define CONFIG_PARTITION_TABLE_OFFSET 0x8000 +#define CONFIG_PARTITION_TABLE_MD5 1 +#define CONFIG_COMPILER_OPTIMIZATION_SIZE 1 +#define CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_ENABLE 1 +#define CONFIG_COMPILER_FLOAT_LIB_FROM_GCCLIB 1 +#define CONFIG_COMPILER_OPTIMIZATION_ASSERTION_LEVEL 2 +#define CONFIG_COMPILER_HIDE_PATHS_MACROS 1 +#define CONFIG_COMPILER_STACK_CHECK_MODE_NONE 1 +#define CONFIG_APPTRACE_DEST_NONE 1 +#define CONFIG_APPTRACE_DEST_UART_NONE 1 +#define CONFIG_APPTRACE_UART_TASK_PRIO 1 +#define CONFIG_APPTRACE_LOCK_ENABLE 1 +#define CONFIG_BT_ENABLED 1 +#define CONFIG_BT_BLUEDROID_ENABLED 1 +#define CONFIG_BT_CONTROLLER_ENABLED 1 +#define CONFIG_BT_BTC_TASK_STACK_SIZE 3072 +#define CONFIG_BT_BLUEDROID_PINNED_TO_CORE 0 +#define CONFIG_BT_BTU_TASK_STACK_SIZE 4096 +#define CONFIG_BT_BLE_ENABLED 1 +#define CONFIG_BT_GATTS_ENABLE 1 +#define CONFIG_BT_GATT_MAX_SR_PROFILES 8 +#define CONFIG_BT_GATT_MAX_SR_ATTRIBUTES 100 +#define CONFIG_BT_GATTS_SEND_SERVICE_CHANGE_AUTO 1 +#define CONFIG_BT_GATTS_SEND_SERVICE_CHANGE_MODE 0 +#define CONFIG_BT_GATTC_ENABLE 1 +#define CONFIG_BT_GATTC_MAX_CACHE_CHAR 40 +#define CONFIG_BT_GATTC_NOTIF_REG_MAX 5 +#define CONFIG_BT_GATTC_CONNECT_RETRY_COUNT 3 +#define CONFIG_BT_BLE_SMP_ENABLE 1 +#define CONFIG_BT_LOG_HCI_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_HCI_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_BTM_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_BTM_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_L2CAP_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_L2CAP_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_RFCOMM_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_RFCOMM_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_SDP_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_SDP_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_GAP_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_GAP_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_BNEP_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_BNEP_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_PAN_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_PAN_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_A2D_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_A2D_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_AVDT_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_AVDT_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_AVCT_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_AVCT_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_AVRC_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_AVRC_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_MCA_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_MCA_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_HID_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_HID_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_APPL_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_APPL_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_GATT_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_GATT_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_SMP_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_SMP_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_BTIF_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_BTIF_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_BTC_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_BTC_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_OSI_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_OSI_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_BLUFI_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_BLUFI_TRACE_LEVEL 2 +#define CONFIG_BT_ACL_CONNECTIONS 4 +#define CONFIG_BT_MULTI_CONNECTION_ENBALE 1 +#define CONFIG_BT_SMP_ENABLE 1 +#define CONFIG_BT_BLE_ESTAB_LINK_CONN_TOUT 30 +#define CONFIG_BT_MAX_DEVICE_NAME_LEN 32 +#define CONFIG_BT_BLE_RPA_TIMEOUT 900 +#define CONFIG_BT_BLE_50_FEATURES_SUPPORTED 1 +#define CONFIG_BT_LE_HCI_INTERFACE_USE_RAM 1 +#define CONFIG_BT_LE_CONTROLLER_NPL_OS_PORTING_SUPPORT 1 +#define CONFIG_BT_LE_50_FEATURE_SUPPORT 1 +#define CONFIG_BT_LE_LL_CFG_FEAT_LE_2M_PHY 1 +#define CONFIG_BT_LE_LL_CFG_FEAT_LE_CODED_PHY 1 +#define CONFIG_BT_LE_EXT_ADV 1 +#define CONFIG_BT_LE_MAX_EXT_ADV_INSTANCES 1 +#define CONFIG_BT_LE_EXT_ADV_MAX_SIZE 1650 +#define CONFIG_BT_LE_ENABLE_PERIODIC_ADV 1 +#define CONFIG_BT_LE_PERIODIC_ADV_SYNC_TRANSFER 1 +#define CONFIG_BT_LE_MAX_PERIODIC_SYNCS 1 +#define CONFIG_BT_LE_MAX_PERIODIC_ADVERTISER_LIST 5 +#define CONFIG_BT_LE_MSYS_1_BLOCK_COUNT 12 +#define CONFIG_BT_LE_MSYS_1_BLOCK_SIZE 256 +#define CONFIG_BT_LE_MSYS_2_BLOCK_COUNT 24 +#define CONFIG_BT_LE_MSYS_2_BLOCK_SIZE 320 +#define CONFIG_BT_LE_ACL_BUF_COUNT 10 +#define CONFIG_BT_LE_ACL_BUF_SIZE 517 +#define CONFIG_BT_LE_HCI_EVT_BUF_SIZE 257 +#define CONFIG_BT_LE_HCI_EVT_HI_BUF_COUNT 30 +#define CONFIG_BT_LE_HCI_EVT_LO_BUF_COUNT 8 +#define CONFIG_BT_LE_CONTROLLER_TASK_STACK_SIZE 4096 +#define CONFIG_BT_LE_LL_RESOLV_LIST_SIZE 4 +#define CONFIG_BT_LE_SECURITY_ENABLE 1 +#define CONFIG_BT_LE_SM_LEGACY 1 +#define CONFIG_BT_LE_SM_SC 1 +#define CONFIG_BT_LE_LL_CFG_FEAT_LE_ENCRYPTION 1 +#define CONFIG_BT_LE_CRYPTO_STACK_MBEDTLS 1 +#define CONFIG_BT_LE_WHITELIST_SIZE 12 +#define CONFIG_BT_LE_LL_DUP_SCAN_LIST_COUNT 20 +#define CONFIG_BT_LE_LL_SCA 60 +#define CONFIG_BT_LE_MAX_CONNECTIONS 3 +#define CONFIG_BT_LE_COEX_PHY_CODED_TX_RX_TLIM_DIS 1 +#define CONFIG_BT_LE_COEX_PHY_CODED_TX_RX_TLIM_EFF 0 +#define CONFIG_BT_LE_LP_CLK_SRC_MAIN_XTAL 1 +#define CONFIG_BT_LE_USE_ESP_TIMER 1 +#define CONFIG_BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_SUPP 1 +#define CONFIG_BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_NUM 100 +#define CONFIG_BT_CTRL_BLE_ADV_REPORT_DISCARD_THRSHOLD 20 +#define CONFIG_BT_LE_SCAN_DUPL 1 +#define CONFIG_BT_LE_SCAN_DUPL_TYPE_DEVICE 1 +#define CONFIG_BT_LE_SCAN_DUPL_TYPE 0 +#define CONFIG_BT_LE_SCAN_DUPL_CACHE_SIZE 100 +#define CONFIG_BT_LE_SCAN_DUPL_CACHE_REFRESH_PERIOD 0 +#define CONFIG_BT_LE_MSYS_INIT_IN_CONTROLLER 1 +#define CONFIG_SPI_MASTER_ISR_IN_IRAM 1 +#define CONFIG_SPI_SLAVE_ISR_IN_IRAM 1 +#define CONFIG_GPTIMER_ISR_HANDLER_IN_IRAM 1 +#define CONFIG_EFUSE_MAX_BLK_LEN 256 +#define CONFIG_ESP_TLS_USING_MBEDTLS 1 +#define CONFIG_ESP_TLS_USE_DS_PERIPHERAL 1 +#define CONFIG_ESP_COEX_SW_COEXIST_ENABLE 1 +#define CONFIG_ESP_ERR_TO_NAME_LOOKUP 1 +#define CONFIG_ETH_ENABLED 1 +#define CONFIG_ETH_USE_SPI_ETHERNET 1 +#define CONFIG_ESP_EVENT_POST_FROM_ISR 1 +#define CONFIG_ESP_EVENT_POST_FROM_IRAM_ISR 1 +#define CONFIG_ESP_HTTP_CLIENT_ENABLE_HTTPS 1 +#define CONFIG_HTTPD_MAX_REQ_HDR_LEN 512 +#define CONFIG_HTTPD_MAX_URI_LEN 512 +#define CONFIG_HTTPD_ERR_RESP_NO_DELAY 1 +#define CONFIG_HTTPD_PURGE_BUF_LEN 32 +#define CONFIG_ESP32H2_REV_MIN_0 1 +#define CONFIG_ESP32H2_REV_MIN_FULL 0 +#define CONFIG_ESP_REV_MIN_FULL 0 +#define CONFIG_ESP32H2_REV_MAX_FULL 99 +#define CONFIG_ESP_REV_MAX_FULL 99 +#define CONFIG_ESP_MAC_ADDR_UNIVERSE_BT 1 +#define CONFIG_ESP_MAC_ADDR_UNIVERSE_IEEE802154 1 +#define CONFIG_ESP_MAC_UNIVERSAL_MAC_ADDRESSES_TWO 1 +#define CONFIG_ESP32H2_UNIVERSAL_MAC_ADDRESSES_TWO 1 +#define CONFIG_ESP32H2_UNIVERSAL_MAC_ADDRESSES 2 +#define CONFIG_ESP_SLEEP_FLASH_LEAKAGE_WORKAROUND 1 +#define CONFIG_ESP_SLEEP_GPIO_RESET_WORKAROUND 1 +#define CONFIG_ESP_SLEEP_WAIT_FLASH_READY_EXTRA_DELAY 0 +#define CONFIG_ESP_SLEEP_GPIO_ENABLE_INTERNAL_RESISTORS 1 +#define CONFIG_RTC_CLK_SRC_INT_RC 1 +#define CONFIG_RTC_CLK_CAL_CYCLES 1024 +#define CONFIG_PERIPH_CTRL_FUNC_IN_IRAM 1 +#define CONFIG_XTAL_FREQ_32 1 +#define CONFIG_XTAL_FREQ 32 +#define CONFIG_ESP_CRYPTO_DPA_PROTECTION_AT_STARTUP 1 +#define CONFIG_ESP_CRYPTO_DPA_PROTECTION_LEVEL_LOW 1 +#define CONFIG_ESP_CRYPTO_DPA_PROTECTION_LEVEL 1 +#define CONFIG_LCD_PANEL_IO_FORMAT_BUF_SIZE 32 +#define CONFIG_ESP_NETIF_IP_LOST_TIMER_INTERVAL 120 +#define CONFIG_ESP_NETIF_TCPIP_LWIP 1 +#define CONFIG_ESP_NETIF_USES_TCPIP_WITH_BSD_API 1 +#define CONFIG_ESP_PHY_CALIBRATION_AND_DATA_STORAGE 1 +#define CONFIG_ESP_PHY_MAX_WIFI_TX_POWER 20 +#define CONFIG_ESP_PHY_MAX_TX_POWER 20 +#define CONFIG_ESP_PHY_RF_CAL_PARTIAL 1 +#define CONFIG_ESP_PHY_CALIBRATION_MODE 0 +#define CONFIG_PM_POWER_DOWN_CPU_IN_LIGHT_SLEEP 1 +#define CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ_96 1 +#define CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ 96 +#define CONFIG_ESP_SYSTEM_PANIC_PRINT_REBOOT 1 +#define CONFIG_ESP_SYSTEM_PANIC_REBOOT_DELAY_SECONDS 0 +#define CONFIG_ESP_SYSTEM_SINGLE_CORE_MODE 1 +#define CONFIG_ESP_SYSTEM_PMP_IDRAM_SPLIT 1 +#define CONFIG_ESP_SYSTEM_EVENT_QUEUE_SIZE 32 +#define CONFIG_ESP_SYSTEM_EVENT_TASK_STACK_SIZE 2304 +#define CONFIG_ESP_MAIN_TASK_STACK_SIZE 3584 +#define CONFIG_ESP_MAIN_TASK_AFFINITY_CPU0 1 +#define CONFIG_ESP_MAIN_TASK_AFFINITY 0x0 +#define CONFIG_ESP_MINIMAL_SHARED_STACK_SIZE 2048 +#define CONFIG_ESP_CONSOLE_UART_DEFAULT 1 +#define CONFIG_ESP_CONSOLE_SECONDARY_USB_SERIAL_JTAG 1 +#define CONFIG_ESP_CONSOLE_USB_SERIAL_JTAG_ENABLED 1 +#define CONFIG_ESP_CONSOLE_UART 1 +#define CONFIG_ESP_CONSOLE_UART_NUM 0 +#define CONFIG_ESP_CONSOLE_UART_BAUDRATE 115200 +#define CONFIG_ESP_INT_WDT 1 +#define CONFIG_ESP_INT_WDT_TIMEOUT_MS 300 +#define CONFIG_ESP_TASK_WDT_EN 1 +#define CONFIG_ESP_TASK_WDT_INIT 1 +#define CONFIG_ESP_TASK_WDT_TIMEOUT_S 5 +#define CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU0 1 +#define CONFIG_ESP_DEBUG_OCDAWARE 1 +#define CONFIG_ESP_SYSTEM_CHECK_INT_LEVEL_4 1 +#define CONFIG_ESP_BROWNOUT_DET 1 +#define CONFIG_ESP_BROWNOUT_DET_LVL_SEL_7 1 +#define CONFIG_ESP_BROWNOUT_DET_LVL 7 +#define CONFIG_ESP_SYSTEM_BROWNOUT_INTR 1 +#define CONFIG_ESP_IPC_TASK_STACK_SIZE 1024 +#define CONFIG_ESP_TIME_FUNCS_USE_RTC_TIMER 1 +#define CONFIG_ESP_TIME_FUNCS_USE_ESP_TIMER 1 +#define CONFIG_ESP_TIMER_TASK_STACK_SIZE 3584 +#define CONFIG_ESP_TIMER_INTERRUPT_LEVEL 1 +#define CONFIG_ESP_TIMER_TASK_AFFINITY 0x0 +#define CONFIG_ESP_TIMER_TASK_AFFINITY_CPU0 1 +#define CONFIG_ESP_TIMER_ISR_AFFINITY 0x1 +#define CONFIG_ESP_TIMER_ISR_AFFINITY_CPU0 1 +#define CONFIG_ESP_TIMER_IMPL_SYSTIMER 1 +#define CONFIG_ESP_WIFI_STATIC_RX_BUFFER_NUM 10 +#define CONFIG_ESP_WIFI_DYNAMIC_RX_BUFFER_NUM 32 +#define CONFIG_ESP_WIFI_DYNAMIC_TX_BUFFER 1 +#define CONFIG_ESP_WIFI_TX_BUFFER_TYPE 1 +#define CONFIG_ESP_WIFI_DYNAMIC_TX_BUFFER_NUM 32 +#define CONFIG_ESP_WIFI_STATIC_RX_MGMT_BUFFER 1 +#define CONFIG_ESP_WIFI_DYNAMIC_RX_MGMT_BUF 0 +#define CONFIG_ESP_WIFI_RX_MGMT_BUF_NUM_DEF 5 +#define CONFIG_ESP_WIFI_AMPDU_TX_ENABLED 1 +#define CONFIG_ESP_WIFI_TX_BA_WIN 6 +#define CONFIG_ESP_WIFI_AMPDU_RX_ENABLED 1 +#define CONFIG_ESP_WIFI_RX_BA_WIN 6 +#define CONFIG_ESP_WIFI_NVS_ENABLED 1 +#define CONFIG_ESP_WIFI_SOFTAP_BEACON_MAX_LEN 752 +#define CONFIG_ESP_WIFI_MGMT_SBUF_NUM 32 +#define CONFIG_ESP_WIFI_IRAM_OPT 1 +#define CONFIG_ESP_WIFI_RX_IRAM_OPT 1 +#define CONFIG_ESP_WIFI_ENABLE_WPA3_SAE 1 +#define CONFIG_ESP_WIFI_ENABLE_SAE_PK 1 +#define CONFIG_ESP_WIFI_SOFTAP_SAE_SUPPORT 1 +#define CONFIG_ESP_WIFI_ENABLE_WPA3_OWE_STA 1 +#define CONFIG_ESP_WIFI_STA_DISCONNECTED_PM_ENABLE 1 +#define CONFIG_ESP_WIFI_SOFTAP_SUPPORT 1 +#define CONFIG_ESP_WIFI_ESPNOW_MAX_ENCRYPT_NUM 7 +#define CONFIG_ESP_WIFI_MBEDTLS_CRYPTO 1 +#define CONFIG_ESP_WIFI_MBEDTLS_TLS_CLIENT 1 +#define CONFIG_ESP_WIFI_ENTERPRISE_SUPPORT 1 +#define CONFIG_ESP_COREDUMP_ENABLE_TO_NONE 1 +#define CONFIG_FATFS_VOLUME_COUNT 2 +#define CONFIG_FATFS_LFN_NONE 1 +#define CONFIG_FATFS_SECTOR_4096 1 +#define CONFIG_FATFS_CODEPAGE_437 1 +#define CONFIG_FATFS_CODEPAGE 437 +#define CONFIG_FATFS_FS_LOCK 0 +#define CONFIG_FATFS_TIMEOUT_MS 10000 +#define CONFIG_FATFS_PER_FILE_CACHE 1 +#define CONFIG_FATFS_VFS_FSTAT_BLKSIZE 0 +#define CONFIG_FREERTOS_UNICORE 1 +#define CONFIG_FREERTOS_HZ 100 +#define CONFIG_FREERTOS_OPTIMIZED_SCHEDULER 1 +#define CONFIG_FREERTOS_CHECK_STACKOVERFLOW_CANARY 1 +#define CONFIG_FREERTOS_THREAD_LOCAL_STORAGE_POINTERS 1 +#define CONFIG_FREERTOS_IDLE_TASK_STACKSIZE 1536 +#define CONFIG_FREERTOS_MAX_TASK_NAME_LEN 16 +#define CONFIG_FREERTOS_TIMER_TASK_PRIORITY 1 +#define CONFIG_FREERTOS_TIMER_TASK_STACK_DEPTH 2048 +#define CONFIG_FREERTOS_TIMER_QUEUE_LENGTH 10 +#define CONFIG_FREERTOS_QUEUE_REGISTRY_SIZE 0 +#define CONFIG_FREERTOS_TASK_NOTIFICATION_ARRAY_ENTRIES 1 +#define CONFIG_FREERTOS_TLSP_DELETION_CALLBACKS 1 +#define CONFIG_FREERTOS_CHECK_MUTEX_GIVEN_BY_OWNER 1 +#define CONFIG_FREERTOS_ISR_STACKSIZE 1536 +#define CONFIG_FREERTOS_INTERRUPT_BACKTRACE 1 +#define CONFIG_FREERTOS_TICK_SUPPORT_SYSTIMER 1 +#define CONFIG_FREERTOS_CORETIMER_SYSTIMER_LVL1 1 +#define CONFIG_FREERTOS_SYSTICK_USES_SYSTIMER 1 +#define CONFIG_FREERTOS_ENABLE_TASK_SNAPSHOT 1 +#define CONFIG_FREERTOS_NO_AFFINITY 0x7FFFFFFF +#define CONFIG_FREERTOS_SUPPORT_STATIC_ALLOCATION 1 +#define CONFIG_FREERTOS_DEBUG_OCDAWARE 1 +#define CONFIG_HAL_ASSERTION_EQUALS_SYSTEM 1 +#define CONFIG_HAL_DEFAULT_ASSERTION_LEVEL 2 +#define CONFIG_HAL_SYSTIMER_USE_ROM_IMPL 1 +#define CONFIG_HAL_WDT_USE_ROM_IMPL 1 +#define CONFIG_HAL_SPI_MASTER_FUNC_IN_IRAM 1 +#define CONFIG_HAL_SPI_SLAVE_FUNC_IN_IRAM 1 +#define CONFIG_HEAP_POISONING_DISABLED 1 +#define CONFIG_HEAP_TRACING_OFF 1 +#define CONFIG_HEAP_TLSF_USE_ROM_IMPL 1 +#define CONFIG_IEEE802154_ENABLED 1 +#define CONFIG_IEEE802154_RX_BUFFER_SIZE 20 +#define CONFIG_IEEE802154_CCA_ED 1 +#define CONFIG_IEEE802154_CCA_MODE 1 +#define CONFIG_IEEE802154_CCA_THRESHOLD -60 +#define CONFIG_IEEE802154_PENDING_TABLE_SIZE 20 +#define CONFIG_LOG_DEFAULT_LEVEL_INFO 1 +#define CONFIG_LOG_DEFAULT_LEVEL 3 +#define CONFIG_LOG_MAXIMUM_EQUALS_DEFAULT 1 +#define CONFIG_LOG_MAXIMUM_LEVEL 3 +#define CONFIG_LOG_COLORS 1 +#define CONFIG_LOG_TIMESTAMP_SOURCE_RTOS 1 +#define CONFIG_LWIP_LOCAL_HOSTNAME "espressif" +#define CONFIG_LWIP_TCPIP_TASK_PRIO 18 +#define CONFIG_LWIP_DNS_SUPPORT_MDNS_QUERIES 1 +#define CONFIG_LWIP_TIMERS_ONDEMAND 1 +#define CONFIG_LWIP_ND6 1 +#define CONFIG_LWIP_MAX_SOCKETS 10 +#define CONFIG_LWIP_SO_REUSE 1 +#define CONFIG_LWIP_SO_REUSE_RXTOALL 1 +#define CONFIG_LWIP_IP4_FRAG 1 +#define CONFIG_LWIP_IP6_FRAG 1 +#define CONFIG_LWIP_IP_REASS_MAX_PBUFS 10 +#define CONFIG_LWIP_ESP_GRATUITOUS_ARP 1 +#define CONFIG_LWIP_GARP_TMR_INTERVAL 60 +#define CONFIG_LWIP_ESP_MLDV6_REPORT 1 +#define CONFIG_LWIP_MLDV6_TMR_INTERVAL 40 +#define CONFIG_LWIP_TCPIP_RECVMBOX_SIZE 32 +#define CONFIG_LWIP_DHCP_DOES_ARP_CHECK 1 +#define CONFIG_LWIP_DHCP_DISABLE_VENDOR_CLASS_ID 1 +#define CONFIG_LWIP_DHCP_OPTIONS_LEN 68 +#define CONFIG_LWIP_NUM_NETIF_CLIENT_DATA 0 +#define CONFIG_LWIP_DHCP_COARSE_TIMER_SECS 1 +#define CONFIG_LWIP_DHCPS 1 +#define CONFIG_LWIP_DHCPS_LEASE_UNIT 60 +#define CONFIG_LWIP_DHCPS_MAX_STATION_NUM 8 +#define CONFIG_LWIP_IPV4 1 +#define CONFIG_LWIP_IPV6 1 +#define CONFIG_LWIP_IPV6_NUM_ADDRESSES 3 +#define CONFIG_LWIP_NETIF_LOOPBACK 1 +#define CONFIG_LWIP_LOOPBACK_MAX_PBUFS 8 +#define CONFIG_LWIP_MAX_ACTIVE_TCP 16 +#define CONFIG_LWIP_MAX_LISTENING_TCP 16 +#define CONFIG_LWIP_TCP_HIGH_SPEED_RETRANSMISSION 1 +#define CONFIG_LWIP_TCP_MAXRTX 12 +#define CONFIG_LWIP_TCP_SYNMAXRTX 12 +#define CONFIG_LWIP_TCP_MSS 1440 +#define CONFIG_LWIP_TCP_TMR_INTERVAL 250 +#define CONFIG_LWIP_TCP_MSL 60000 +#define CONFIG_LWIP_TCP_FIN_WAIT_TIMEOUT 20000 +#define CONFIG_LWIP_TCP_SND_BUF_DEFAULT 5760 +#define CONFIG_LWIP_TCP_WND_DEFAULT 5760 +#define CONFIG_LWIP_TCP_RECVMBOX_SIZE 6 +#define CONFIG_LWIP_TCP_QUEUE_OOSEQ 1 +#define CONFIG_LWIP_TCP_OOSEQ_TIMEOUT 6 +#define CONFIG_LWIP_TCP_OOSEQ_MAX_PBUFS 4 +#define CONFIG_LWIP_TCP_OVERSIZE_MSS 1 +#define CONFIG_LWIP_TCP_RTO_TIME 1500 +#define CONFIG_LWIP_MAX_UDP_PCBS 16 +#define CONFIG_LWIP_UDP_RECVMBOX_SIZE 6 +#define CONFIG_LWIP_CHECKSUM_CHECK_ICMP 1 +#define CONFIG_LWIP_TCPIP_TASK_STACK_SIZE 3072 +#define CONFIG_LWIP_TCPIP_TASK_AFFINITY_NO_AFFINITY 1 +#define CONFIG_LWIP_TCPIP_TASK_AFFINITY 0x7FFFFFFF +#define CONFIG_LWIP_IPV6_MEMP_NUM_ND6_QUEUE 3 +#define CONFIG_LWIP_IPV6_ND6_NUM_NEIGHBORS 5 +#define CONFIG_LWIP_ICMP 1 +#define CONFIG_LWIP_MAX_RAW_PCBS 16 +#define CONFIG_LWIP_SNTP_MAX_SERVERS 1 +#define CONFIG_LWIP_SNTP_UPDATE_DELAY 3600000 +#define CONFIG_LWIP_BRIDGEIF_MAX_PORTS 7 +#define CONFIG_LWIP_ESP_LWIP_ASSERT 1 +#define CONFIG_LWIP_HOOK_TCP_ISN_DEFAULT 1 +#define CONFIG_LWIP_HOOK_IP6_ROUTE_NONE 1 +#define CONFIG_LWIP_HOOK_ND6_GET_GW_NONE 1 +#define CONFIG_LWIP_HOOK_IP6_SELECT_SRC_ADDR_NONE 1 +#define CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_NONE 1 +#define CONFIG_LWIP_HOOK_IP6_INPUT_NONE 1 +#define CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC 1 +#define CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN 1 +#define CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN 16384 +#define CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN 4096 +#define CONFIG_MBEDTLS_ECDH_LEGACY_CONTEXT 1 +#define CONFIG_MBEDTLS_SSL_KEEP_PEER_CERTIFICATE 1 +#define CONFIG_MBEDTLS_PKCS7_C 1 +#define CONFIG_MBEDTLS_CERTIFICATE_BUNDLE 1 +#define CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_FULL 1 +#define CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_MAX_CERTS 200 +#define CONFIG_MBEDTLS_ECP_RESTARTABLE 1 +#define CONFIG_MBEDTLS_CMAC_C 1 +#define CONFIG_MBEDTLS_HARDWARE_AES 1 +#define CONFIG_MBEDTLS_AES_USE_INTERRUPT 1 +#define CONFIG_MBEDTLS_HARDWARE_MPI 1 +#define CONFIG_MBEDTLS_MPI_USE_INTERRUPT 1 +#define CONFIG_MBEDTLS_HARDWARE_SHA 1 +#define CONFIG_MBEDTLS_HARDWARE_ECC 1 +#define CONFIG_MBEDTLS_ECC_OTHER_CURVES_SOFT_FALLBACK 1 +#define CONFIG_MBEDTLS_ROM_MD5 1 +#define CONFIG_MBEDTLS_HARDWARE_ECDSA_VERIFY 1 +#define CONFIG_MBEDTLS_HAVE_TIME 1 +#define CONFIG_MBEDTLS_ECDSA_DETERMINISTIC 1 +#define CONFIG_MBEDTLS_SHA512_C 1 +#define CONFIG_MBEDTLS_TLS_SERVER_AND_CLIENT 1 +#define CONFIG_MBEDTLS_TLS_SERVER 1 +#define CONFIG_MBEDTLS_TLS_CLIENT 1 +#define CONFIG_MBEDTLS_TLS_ENABLED 1 +#define CONFIG_MBEDTLS_KEY_EXCHANGE_RSA 1 +#define CONFIG_MBEDTLS_KEY_EXCHANGE_ELLIPTIC_CURVE 1 +#define CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_RSA 1 +#define CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA 1 +#define CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA 1 +#define CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_RSA 1 +#define CONFIG_MBEDTLS_SSL_RENEGOTIATION 1 +#define CONFIG_MBEDTLS_SSL_PROTO_TLS1_2 1 +#define CONFIG_MBEDTLS_SSL_ALPN 1 +#define CONFIG_MBEDTLS_CLIENT_SSL_SESSION_TICKETS 1 +#define CONFIG_MBEDTLS_SERVER_SSL_SESSION_TICKETS 1 +#define CONFIG_MBEDTLS_AES_C 1 +#define CONFIG_MBEDTLS_CCM_C 1 +#define CONFIG_MBEDTLS_GCM_C 1 +#define CONFIG_MBEDTLS_PEM_PARSE_C 1 +#define CONFIG_MBEDTLS_PEM_WRITE_C 1 +#define CONFIG_MBEDTLS_X509_CRL_PARSE_C 1 +#define CONFIG_MBEDTLS_X509_CSR_PARSE_C 1 +#define CONFIG_MBEDTLS_ECP_C 1 +#define CONFIG_MBEDTLS_ECDH_C 1 +#define CONFIG_MBEDTLS_ECDSA_C 1 +#define CONFIG_MBEDTLS_ECP_DP_SECP192R1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_SECP224R1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_SECP256R1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_SECP384R1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_SECP521R1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_SECP192K1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_SECP224K1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_SECP256K1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_BP256R1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_BP384R1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_BP512R1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_CURVE25519_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_NIST_OPTIM 1 +#define CONFIG_MBEDTLS_ECP_FIXED_POINT_OPTIM 1 +#define CONFIG_MBEDTLS_LARGE_KEY_SOFTWARE_MPI 1 +#define CONFIG_MQTT_PROTOCOL_311 1 +#define CONFIG_MQTT_TRANSPORT_SSL 1 +#define CONFIG_MQTT_TRANSPORT_WEBSOCKET 1 +#define CONFIG_MQTT_TRANSPORT_WEBSOCKET_SECURE 1 +#define CONFIG_NEWLIB_STDOUT_LINE_ENDING_CRLF 1 +#define CONFIG_NEWLIB_STDIN_LINE_ENDING_CR 1 +#define CONFIG_NEWLIB_TIME_SYSCALL_USE_RTC_HRT 1 +#define CONFIG_OPENTHREAD_NETWORK_NAME "OpenThread-ESP" +#define CONFIG_OPENTHREAD_MESH_LOCAL_PREFIX "fd00:db8:a0:0::/64" +#define CONFIG_OPENTHREAD_NETWORK_CHANNEL 15 +#define CONFIG_OPENTHREAD_NETWORK_PANID 0x1234 +#define CONFIG_OPENTHREAD_NETWORK_EXTPANID "dead00beef00cafe" +#define CONFIG_OPENTHREAD_NETWORK_MASTERKEY "00112233445566778899aabbccddeeff" +#define CONFIG_OPENTHREAD_NETWORK_PSKC "104810e2315100afd6bc9215a6bfac53" +#define CONFIG_OPENTHREAD_XTAL_ACCURACY 130 +#define CONFIG_ESP_PROTOCOMM_SUPPORT_SECURITY_VERSION_0 1 +#define CONFIG_ESP_PROTOCOMM_SUPPORT_SECURITY_VERSION_1 1 +#define CONFIG_ESP_PROTOCOMM_SUPPORT_SECURITY_VERSION_2 1 +#define CONFIG_PTHREAD_TASK_PRIO_DEFAULT 5 +#define CONFIG_PTHREAD_TASK_STACK_SIZE_DEFAULT 3072 +#define CONFIG_PTHREAD_TASK_CORE_DEFAULT -1 +#define CONFIG_PTHREAD_TASK_NAME_DEFAULT "pthread" +#define CONFIG_MMU_PAGE_SIZE_32KB 1 +#define CONFIG_MMU_PAGE_MODE "32KB" +#define CONFIG_MMU_PAGE_SIZE 0x8000 +#define CONFIG_SPI_FLASH_ROM_DRIVER_PATCH 1 +#define CONFIG_SPI_FLASH_DANGEROUS_WRITE_ABORTS 1 +#define CONFIG_SPI_FLASH_YIELD_DURING_ERASE 1 +#define CONFIG_SPI_FLASH_ERASE_YIELD_DURATION_MS 20 +#define CONFIG_SPI_FLASH_ERASE_YIELD_TICKS 1 +#define CONFIG_SPI_FLASH_WRITE_CHUNK_SIZE 8192 +#define CONFIG_SPI_FLASH_BROWNOUT_RESET_XMC 1 +#define CONFIG_SPI_FLASH_BROWNOUT_RESET 1 +#define CONFIG_SPI_FLASH_VENDOR_XMC_SUPPORTED 1 +#define CONFIG_SPI_FLASH_ENABLE_ENCRYPTED_READ_WRITE 1 +#define CONFIG_SPIFFS_MAX_PARTITIONS 3 +#define CONFIG_SPIFFS_CACHE 1 +#define CONFIG_SPIFFS_CACHE_WR 1 +#define CONFIG_SPIFFS_PAGE_CHECK 1 +#define CONFIG_SPIFFS_GC_MAX_RUNS 10 +#define CONFIG_SPIFFS_PAGE_SIZE 256 +#define CONFIG_SPIFFS_OBJ_NAME_LEN 32 +#define CONFIG_SPIFFS_USE_MAGIC 1 +#define CONFIG_SPIFFS_USE_MAGIC_LENGTH 1 +#define CONFIG_SPIFFS_META_LENGTH 4 +#define CONFIG_SPIFFS_USE_MTIME 1 +#define CONFIG_WS_TRANSPORT 1 +#define CONFIG_WS_BUFFER_SIZE 1024 +#define CONFIG_UNITY_ENABLE_FLOAT 1 +#define CONFIG_UNITY_ENABLE_DOUBLE 1 +#define CONFIG_UNITY_ENABLE_IDF_TEST_RUNNER 1 +#define CONFIG_VFS_SUPPORT_IO 1 +#define CONFIG_VFS_SUPPORT_DIR 1 +#define CONFIG_VFS_SUPPORT_SELECT 1 +#define CONFIG_VFS_SUPPRESS_SELECT_DEBUG_OUTPUT 1 +#define CONFIG_VFS_SUPPORT_TERMIOS 1 +#define CONFIG_VFS_MAX_COUNT 8 +#define CONFIG_VFS_SEMIHOSTFS_MAX_MOUNT_POINTS 1 +#define CONFIG_WL_SECTOR_SIZE_4096 1 +#define CONFIG_WL_SECTOR_SIZE 4096 +#define CONFIG_WIFI_PROV_SCAN_MAX_ENTRIES 16 +#define CONFIG_WIFI_PROV_AUTOSTOP_TIMEOUT 30 +#define CONFIG_WIFI_PROV_STA_ALL_CHANNEL_SCAN 1 + +/* List of deprecated options */ +#define CONFIG_A2D_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_A2D_TRACE_LEVEL +#define CONFIG_A2D_TRACE_LEVEL_WARNING CONFIG_BT_LOG_A2D_TRACE_LEVEL_WARNING +#define CONFIG_APPL_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_APPL_TRACE_LEVEL +#define CONFIG_APPL_TRACE_LEVEL_WARNING CONFIG_BT_LOG_APPL_TRACE_LEVEL_WARNING +#define CONFIG_AVCT_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_AVCT_TRACE_LEVEL +#define CONFIG_AVCT_TRACE_LEVEL_WARNING CONFIG_BT_LOG_AVCT_TRACE_LEVEL_WARNING +#define CONFIG_AVDT_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_AVDT_TRACE_LEVEL +#define CONFIG_AVDT_TRACE_LEVEL_WARNING CONFIG_BT_LOG_AVDT_TRACE_LEVEL_WARNING +#define CONFIG_AVRC_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_AVRC_TRACE_LEVEL +#define CONFIG_AVRC_TRACE_LEVEL_WARNING CONFIG_BT_LOG_AVRC_TRACE_LEVEL_WARNING +#define CONFIG_BLE_ESTABLISH_LINK_CONNECTION_TIMEOUT CONFIG_BT_BLE_ESTAB_LINK_CONN_TOUT +#define CONFIG_BLE_SMP_ENABLE CONFIG_BT_BLE_SMP_ENABLE +#define CONFIG_BLUEDROID_ENABLED CONFIG_BT_BLUEDROID_ENABLED +#define CONFIG_BLUEDROID_PINNED_TO_CORE CONFIG_BT_BLUEDROID_PINNED_TO_CORE +#define CONFIG_BLUFI_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_BLUFI_TRACE_LEVEL +#define CONFIG_BLUFI_TRACE_LEVEL_WARNING CONFIG_BT_LOG_BLUFI_TRACE_LEVEL_WARNING +#define CONFIG_BNEP_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_BNEP_TRACE_LEVEL +#define CONFIG_BROWNOUT_DET CONFIG_ESP_BROWNOUT_DET +#define CONFIG_BROWNOUT_DET_LVL CONFIG_ESP_BROWNOUT_DET_LVL +#define CONFIG_BROWNOUT_DET_LVL_SEL_7 CONFIG_ESP_BROWNOUT_DET_LVL_SEL_7 +#define CONFIG_BTC_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_BTC_TRACE_LEVEL +#define CONFIG_BTC_TASK_STACK_SIZE CONFIG_BT_BTC_TASK_STACK_SIZE +#define CONFIG_BTC_TRACE_LEVEL_WARNING CONFIG_BT_LOG_BTC_TRACE_LEVEL_WARNING +#define CONFIG_BTH_LOG_SDP_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_SDP_TRACE_LEVEL +#define CONFIG_BTIF_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_BTIF_TRACE_LEVEL +#define CONFIG_BTIF_TRACE_LEVEL_WARNING CONFIG_BT_LOG_BTIF_TRACE_LEVEL_WARNING +#define CONFIG_BTM_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_BTM_TRACE_LEVEL +#define CONFIG_BTM_TRACE_LEVEL_WARNING CONFIG_BT_LOG_BTM_TRACE_LEVEL_WARNING +#define CONFIG_BTU_TASK_STACK_SIZE CONFIG_BT_BTU_TASK_STACK_SIZE +#define CONFIG_BT_NIMBLE_COEX_PHY_CODED_TX_RX_TLIM_DIS CONFIG_BT_LE_COEX_PHY_CODED_TX_RX_TLIM_DIS +#define CONFIG_COMPILER_OPTIMIZATION_LEVEL_RELEASE CONFIG_COMPILER_OPTIMIZATION_SIZE +#define CONFIG_CONSOLE_UART CONFIG_ESP_CONSOLE_UART +#define CONFIG_CONSOLE_UART_BAUDRATE CONFIG_ESP_CONSOLE_UART_BAUDRATE +#define CONFIG_CONSOLE_UART_DEFAULT CONFIG_ESP_CONSOLE_UART_DEFAULT +#define CONFIG_CONSOLE_UART_NUM CONFIG_ESP_CONSOLE_UART_NUM +#define CONFIG_ESP32_APPTRACE_DEST_NONE CONFIG_APPTRACE_DEST_NONE +#define CONFIG_ESP32_APPTRACE_LOCK_ENABLE CONFIG_APPTRACE_LOCK_ENABLE +#define CONFIG_ESP32_ENABLE_COREDUMP_TO_NONE CONFIG_ESP_COREDUMP_ENABLE_TO_NONE +#define CONFIG_ESP32_PHY_CALIBRATION_AND_DATA_STORAGE CONFIG_ESP_PHY_CALIBRATION_AND_DATA_STORAGE +#define CONFIG_ESP32_PHY_MAX_TX_POWER CONFIG_ESP_PHY_MAX_TX_POWER +#define CONFIG_ESP32_PHY_MAX_WIFI_TX_POWER CONFIG_ESP_PHY_MAX_WIFI_TX_POWER +#define CONFIG_ESP32_PTHREAD_TASK_CORE_DEFAULT CONFIG_PTHREAD_TASK_CORE_DEFAULT +#define CONFIG_ESP32_PTHREAD_TASK_NAME_DEFAULT CONFIG_PTHREAD_TASK_NAME_DEFAULT +#define CONFIG_ESP32_PTHREAD_TASK_PRIO_DEFAULT CONFIG_PTHREAD_TASK_PRIO_DEFAULT +#define CONFIG_ESP32_PTHREAD_TASK_STACK_SIZE_DEFAULT CONFIG_PTHREAD_TASK_STACK_SIZE_DEFAULT +#define CONFIG_ESP32_WIFI_AMPDU_RX_ENABLED CONFIG_ESP_WIFI_AMPDU_RX_ENABLED +#define CONFIG_ESP32_WIFI_AMPDU_TX_ENABLED CONFIG_ESP_WIFI_AMPDU_TX_ENABLED +#define CONFIG_ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM CONFIG_ESP_WIFI_DYNAMIC_RX_BUFFER_NUM +#define CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER CONFIG_ESP_WIFI_DYNAMIC_TX_BUFFER +#define CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER_NUM CONFIG_ESP_WIFI_DYNAMIC_TX_BUFFER_NUM +#define CONFIG_ESP32_WIFI_ENABLE_WPA3_OWE_STA CONFIG_ESP_WIFI_ENABLE_WPA3_OWE_STA +#define CONFIG_ESP32_WIFI_ENABLE_WPA3_SAE CONFIG_ESP_WIFI_ENABLE_WPA3_SAE +#define CONFIG_ESP32_WIFI_IRAM_OPT CONFIG_ESP_WIFI_IRAM_OPT +#define CONFIG_ESP32_WIFI_MGMT_SBUF_NUM CONFIG_ESP_WIFI_MGMT_SBUF_NUM +#define CONFIG_ESP32_WIFI_NVS_ENABLED CONFIG_ESP_WIFI_NVS_ENABLED +#define CONFIG_ESP32_WIFI_RX_BA_WIN CONFIG_ESP_WIFI_RX_BA_WIN +#define CONFIG_ESP32_WIFI_RX_IRAM_OPT CONFIG_ESP_WIFI_RX_IRAM_OPT +#define CONFIG_ESP32_WIFI_SOFTAP_BEACON_MAX_LEN CONFIG_ESP_WIFI_SOFTAP_BEACON_MAX_LEN +#define CONFIG_ESP32_WIFI_STATIC_RX_BUFFER_NUM CONFIG_ESP_WIFI_STATIC_RX_BUFFER_NUM +#define CONFIG_ESP32_WIFI_SW_COEXIST_ENABLE CONFIG_ESP_COEX_SW_COEXIST_ENABLE +#define CONFIG_ESP32_WIFI_TX_BA_WIN CONFIG_ESP_WIFI_TX_BA_WIN +#define CONFIG_ESP32_WIFI_TX_BUFFER_TYPE CONFIG_ESP_WIFI_TX_BUFFER_TYPE +#define CONFIG_ESP_GRATUITOUS_ARP CONFIG_LWIP_ESP_GRATUITOUS_ARP +#define CONFIG_ESP_SYSTEM_PM_POWER_DOWN_CPU CONFIG_PM_POWER_DOWN_CPU_IN_LIGHT_SLEEP +#define CONFIG_ESP_TASK_WDT CONFIG_ESP_TASK_WDT_INIT +#define CONFIG_ESP_WIFI_SW_COEXIST_ENABLE CONFIG_ESP_COEX_SW_COEXIST_ENABLE +#define CONFIG_FLASHMODE_DIO CONFIG_ESPTOOLPY_FLASHMODE_DIO +#define CONFIG_GAP_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_GAP_TRACE_LEVEL +#define CONFIG_GAP_TRACE_LEVEL_WARNING CONFIG_BT_LOG_GAP_TRACE_LEVEL_WARNING +#define CONFIG_GARP_TMR_INTERVAL CONFIG_LWIP_GARP_TMR_INTERVAL +#define CONFIG_GATTC_ENABLE CONFIG_BT_GATTC_ENABLE +#define CONFIG_GATTS_ENABLE CONFIG_BT_GATTS_ENABLE +#define CONFIG_GATTS_SEND_SERVICE_CHANGE_AUTO CONFIG_BT_GATTS_SEND_SERVICE_CHANGE_AUTO +#define CONFIG_GATTS_SEND_SERVICE_CHANGE_MODE CONFIG_BT_GATTS_SEND_SERVICE_CHANGE_MODE +#define CONFIG_GATT_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_GATT_TRACE_LEVEL +#define CONFIG_GATT_TRACE_LEVEL_WARNING CONFIG_BT_LOG_GATT_TRACE_LEVEL_WARNING +#define CONFIG_HCI_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_HCI_TRACE_LEVEL +#define CONFIG_HCI_TRACE_LEVEL_WARNING CONFIG_BT_LOG_HCI_TRACE_LEVEL_WARNING +#define CONFIG_HID_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_HID_TRACE_LEVEL +#define CONFIG_HID_TRACE_LEVEL_WARNING CONFIG_BT_LOG_HID_TRACE_LEVEL_WARNING +#define CONFIG_INT_WDT CONFIG_ESP_INT_WDT +#define CONFIG_INT_WDT_TIMEOUT_MS CONFIG_ESP_INT_WDT_TIMEOUT_MS +#define CONFIG_IPC_TASK_STACK_SIZE CONFIG_ESP_IPC_TASK_STACK_SIZE +#define CONFIG_L2CAP_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_L2CAP_TRACE_LEVEL +#define CONFIG_L2CAP_TRACE_LEVEL_WARNING CONFIG_BT_LOG_L2CAP_TRACE_LEVEL_WARNING +#define CONFIG_LOG_BOOTLOADER_LEVEL CONFIG_BOOTLOADER_LOG_LEVEL +#define CONFIG_LOG_BOOTLOADER_LEVEL_INFO CONFIG_BOOTLOADER_LOG_LEVEL_INFO +#define CONFIG_MAIN_TASK_STACK_SIZE CONFIG_ESP_MAIN_TASK_STACK_SIZE +#define CONFIG_MCA_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_MCA_TRACE_LEVEL +#define CONFIG_MCA_TRACE_LEVEL_WARNING CONFIG_BT_LOG_MCA_TRACE_LEVEL_WARNING +#define CONFIG_MONITOR_BAUD CONFIG_ESPTOOLPY_MONITOR_BAUD +#define CONFIG_OPTIMIZATION_ASSERTIONS_ENABLED CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_ENABLE +#define CONFIG_OPTIMIZATION_ASSERTION_LEVEL CONFIG_COMPILER_OPTIMIZATION_ASSERTION_LEVEL +#define CONFIG_OPTIMIZATION_LEVEL_RELEASE CONFIG_COMPILER_OPTIMIZATION_SIZE +#define CONFIG_OSI_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_OSI_TRACE_LEVEL +#define CONFIG_OSI_TRACE_LEVEL_WARNING CONFIG_BT_LOG_OSI_TRACE_LEVEL_WARNING +#define CONFIG_PAN_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_PAN_TRACE_LEVEL +#define CONFIG_PAN_TRACE_LEVEL_WARNING CONFIG_BT_LOG_PAN_TRACE_LEVEL_WARNING +#define CONFIG_POST_EVENTS_FROM_IRAM_ISR CONFIG_ESP_EVENT_POST_FROM_IRAM_ISR +#define CONFIG_POST_EVENTS_FROM_ISR CONFIG_ESP_EVENT_POST_FROM_ISR +#define CONFIG_RFCOMM_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_RFCOMM_TRACE_LEVEL +#define CONFIG_RFCOMM_TRACE_LEVEL_WARNING CONFIG_BT_LOG_RFCOMM_TRACE_LEVEL_WARNING +#define CONFIG_SDP_TRACE_LEVEL_WARNING CONFIG_BT_LOG_SDP_TRACE_LEVEL_WARNING +#define CONFIG_SEMIHOSTFS_MAX_MOUNT_POINTS CONFIG_VFS_SEMIHOSTFS_MAX_MOUNT_POINTS +#define CONFIG_SMP_ENABLE CONFIG_BT_SMP_ENABLE +#define CONFIG_SMP_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_SMP_TRACE_LEVEL +#define CONFIG_SMP_TRACE_LEVEL_WARNING CONFIG_BT_LOG_SMP_TRACE_LEVEL_WARNING +#define CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ABORTS CONFIG_SPI_FLASH_DANGEROUS_WRITE_ABORTS +#define CONFIG_STACK_CHECK_NONE CONFIG_COMPILER_STACK_CHECK_MODE_NONE +#define CONFIG_SUPPORT_TERMIOS CONFIG_VFS_SUPPORT_TERMIOS +#define CONFIG_SUPPRESS_SELECT_DEBUG_OUTPUT CONFIG_VFS_SUPPRESS_SELECT_DEBUG_OUTPUT +#define CONFIG_SW_COEXIST_ENABLE CONFIG_ESP_COEX_SW_COEXIST_ENABLE +#define CONFIG_SYSTEM_EVENT_QUEUE_SIZE CONFIG_ESP_SYSTEM_EVENT_QUEUE_SIZE +#define CONFIG_SYSTEM_EVENT_TASK_STACK_SIZE CONFIG_ESP_SYSTEM_EVENT_TASK_STACK_SIZE +#define CONFIG_TASK_WDT CONFIG_ESP_TASK_WDT_INIT +#define CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU0 CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU0 +#define CONFIG_TASK_WDT_TIMEOUT_S CONFIG_ESP_TASK_WDT_TIMEOUT_S +#define CONFIG_TCPIP_RECVMBOX_SIZE CONFIG_LWIP_TCPIP_RECVMBOX_SIZE +#define CONFIG_TCPIP_TASK_AFFINITY CONFIG_LWIP_TCPIP_TASK_AFFINITY +#define CONFIG_TCPIP_TASK_AFFINITY_NO_AFFINITY CONFIG_LWIP_TCPIP_TASK_AFFINITY_NO_AFFINITY +#define CONFIG_TCPIP_TASK_STACK_SIZE CONFIG_LWIP_TCPIP_TASK_STACK_SIZE +#define CONFIG_TCP_MAXRTX CONFIG_LWIP_TCP_MAXRTX +#define CONFIG_TCP_MSL CONFIG_LWIP_TCP_MSL +#define CONFIG_TCP_MSS CONFIG_LWIP_TCP_MSS +#define CONFIG_TCP_OVERSIZE_MSS CONFIG_LWIP_TCP_OVERSIZE_MSS +#define CONFIG_TCP_QUEUE_OOSEQ CONFIG_LWIP_TCP_QUEUE_OOSEQ +#define CONFIG_TCP_RECVMBOX_SIZE CONFIG_LWIP_TCP_RECVMBOX_SIZE +#define CONFIG_TCP_SND_BUF_DEFAULT CONFIG_LWIP_TCP_SND_BUF_DEFAULT +#define CONFIG_TCP_SYNMAXRTX CONFIG_LWIP_TCP_SYNMAXRTX +#define CONFIG_TCP_WND_DEFAULT CONFIG_LWIP_TCP_WND_DEFAULT +#define CONFIG_TIMER_QUEUE_LENGTH CONFIG_FREERTOS_TIMER_QUEUE_LENGTH +#define CONFIG_TIMER_TASK_PRIORITY CONFIG_FREERTOS_TIMER_TASK_PRIORITY +#define CONFIG_TIMER_TASK_STACK_DEPTH CONFIG_FREERTOS_TIMER_TASK_STACK_DEPTH +#define CONFIG_TIMER_TASK_STACK_SIZE CONFIG_ESP_TIMER_TASK_STACK_SIZE +#define CONFIG_UDP_RECVMBOX_SIZE CONFIG_LWIP_UDP_RECVMBOX_SIZE +#define CONFIG_WPA_MBEDTLS_CRYPTO CONFIG_ESP_WIFI_MBEDTLS_CRYPTO +#define CONFIG_WPA_MBEDTLS_TLS_CLIENT CONFIG_ESP_WIFI_MBEDTLS_TLS_CLIENT diff --git a/espradio/blobs/headers/esp32s2/phy_init_data.h b/espradio/blobs/headers/esp32s2/phy_init_data.h new file mode 100644 index 000000000..5128a8656 --- /dev/null +++ b/espradio/blobs/headers/esp32s2/phy_init_data.h @@ -0,0 +1,198 @@ +/* + * SPDX-FileCopyrightText: 2016-2022 Espressif Systems (Shanghai) CO LTD + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#ifndef PHY_INIT_DATA_H +#define PHY_INIT_DATA_H /* don't use #pragma once here, we compile this file sometimes */ +#include "esp_phy_init.h" +#include "sdkconfig.h" + +#ifdef __cplusplus +extern "C" { +#endif + +// constrain a value between 'low' and 'high', inclusive +#define LIMIT(val, low, high) ((val < low) ? low : (val > high) ? high : val) + +#define PHY_INIT_MAGIC "PHYINIT" + +// define the lowest tx power as LOWEST_PHY_TX_POWER +#define PHY_TX_POWER_LOWEST LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 52) +#define PHY_TX_POWER_OFFSET 2 +#define PHY_TX_POWER_NUM 14 + +#if CONFIG_ESP_PHY_MULTIPLE_INIT_DATA_BIN +#define PHY_CRC_ALGORITHM 1 +#define PHY_COUNTRY_CODE_LEN 2 +#define PHY_INIT_DATA_TYPE_OFFSET 126 +#define PHY_SUPPORT_MULTIPLE_BIN_OFFSET 125 +#endif + +static const char phy_init_magic_pre[] = PHY_INIT_MAGIC; + +/** + * @brief Structure containing default recommended PHY initialization parameters. + */ +static const esp_phy_init_data_t phy_init_data= { { + 0x80, + 0x00, + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x4E), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x4E), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x48), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x48), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x48), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x48), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x48), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x48), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x44), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x44), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x48), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x48), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x44), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x42), + 0x00, + 0x00, + 0x00, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0xf1 +} }; + +static const char phy_init_magic_post[] = PHY_INIT_MAGIC; + +#if CONFIG_ESP_PHY_MULTIPLE_INIT_DATA_BIN +/** + * @brief PHY init data control infomation structure + */ +typedef struct { + uint8_t control_info_checksum[4]; /*!< 4-byte control infomation checksum */ + uint8_t multiple_bin_checksum[4]; /*!< 4-byte multiple bin checksum */ + uint8_t check_algorithm; /*!< check algorithm */ + uint8_t version; /*!< PHY init data bin version */ + uint8_t number; /*!< PHY init data bin number */ + uint8_t length[2]; /*!< Length of each PHY init data bin */ + uint8_t reserved[19]; /*!< 19-byte reserved */ +} __attribute__ ((packed)) phy_control_info_data_t; + +/** + * @brief Country corresponds to PHY init data type structure + */ +typedef struct { + char cc[PHY_COUNTRY_CODE_LEN]; + uint8_t type; +} phy_country_to_bin_type_t; +#endif + +#ifdef __cplusplus +} +#endif + +#endif /* PHY_INIT_DATA_H */ diff --git a/espradio/blobs/headers/esp32s2/sdkconfig.h b/espradio/blobs/headers/esp32s2/sdkconfig.h new file mode 100644 index 000000000..5bd36b97b --- /dev/null +++ b/espradio/blobs/headers/esp32s2/sdkconfig.h @@ -0,0 +1,801 @@ +/* + * Automatically generated file. DO NOT EDIT. + * Espressif IoT Development Framework (ESP-IDF) 5.1.2 Configuration Header + */ +#pragma once +#define CONFIG_SOC_ADC_SUPPORTED 1 +#define CONFIG_SOC_DAC_SUPPORTED 1 +#define CONFIG_SOC_UART_SUPPORTED 1 +#define CONFIG_SOC_TWAI_SUPPORTED 1 +#define CONFIG_SOC_CP_DMA_SUPPORTED 1 +#define CONFIG_SOC_DEDICATED_GPIO_SUPPORTED 1 +#define CONFIG_SOC_GPTIMER_SUPPORTED 1 +#define CONFIG_SOC_SUPPORTS_SECURE_DL_MODE 1 +#define CONFIG_SOC_ULP_FSM_SUPPORTED 1 +#define CONFIG_SOC_RISCV_COPROC_SUPPORTED 1 +#define CONFIG_SOC_USB_OTG_SUPPORTED 1 +#define CONFIG_SOC_PCNT_SUPPORTED 1 +#define CONFIG_SOC_WIFI_SUPPORTED 1 +#define CONFIG_SOC_ULP_SUPPORTED 1 +#define CONFIG_SOC_CCOMP_TIMER_SUPPORTED 1 +#define CONFIG_SOC_ASYNC_MEMCPY_SUPPORTED 1 +#define CONFIG_SOC_EFUSE_KEY_PURPOSE_FIELD 1 +#define CONFIG_SOC_TEMP_SENSOR_SUPPORTED 1 +#define CONFIG_SOC_CACHE_SUPPORT_WRAP 1 +#define CONFIG_SOC_RTC_FAST_MEM_SUPPORTED 1 +#define CONFIG_SOC_RTC_SLOW_MEM_SUPPORTED 1 +#define CONFIG_SOC_RTC_MEM_SUPPORTED 1 +#define CONFIG_SOC_PSRAM_DMA_CAPABLE 1 +#define CONFIG_SOC_XT_WDT_SUPPORTED 1 +#define CONFIG_SOC_I2S_SUPPORTED 1 +#define CONFIG_SOC_RMT_SUPPORTED 1 +#define CONFIG_SOC_SDM_SUPPORTED 1 +#define CONFIG_SOC_GPSPI_SUPPORTED 1 +#define CONFIG_SOC_LEDC_SUPPORTED 1 +#define CONFIG_SOC_I2C_SUPPORTED 1 +#define CONFIG_SOC_SYSTIMER_SUPPORTED 1 +#define CONFIG_SOC_AES_SUPPORTED 1 +#define CONFIG_SOC_MPI_SUPPORTED 1 +#define CONFIG_SOC_SHA_SUPPORTED 1 +#define CONFIG_SOC_HMAC_SUPPORTED 1 +#define CONFIG_SOC_DIG_SIGN_SUPPORTED 1 +#define CONFIG_SOC_FLASH_ENC_SUPPORTED 1 +#define CONFIG_SOC_SECURE_BOOT_SUPPORTED 1 +#define CONFIG_SOC_MEMPROT_SUPPORTED 1 +#define CONFIG_SOC_TOUCH_SENSOR_SUPPORTED 1 +#define CONFIG_SOC_BOD_SUPPORTED 1 +#define CONFIG_SOC_XTAL_SUPPORT_40M 1 +#define CONFIG_SOC_ADC_RTC_CTRL_SUPPORTED 1 +#define CONFIG_SOC_ADC_DIG_CTRL_SUPPORTED 1 +#define CONFIG_SOC_ADC_ARBITER_SUPPORTED 1 +#define CONFIG_SOC_ADC_DIG_IIR_FILTER_SUPPORTED 1 +#define CONFIG_SOC_ADC_DIG_IIR_FILTER_UNIT_BINDED 1 +#define CONFIG_SOC_ADC_MONITOR_SUPPORTED 1 +#define CONFIG_SOC_ADC_DMA_SUPPORTED 1 +#define CONFIG_SOC_ADC_PERIPH_NUM 2 +#define CONFIG_SOC_ADC_MAX_CHANNEL_NUM 10 +#define CONFIG_SOC_ADC_ATTEN_NUM 4 +#define CONFIG_SOC_ADC_DIGI_CONTROLLER_NUM 2 +#define CONFIG_SOC_ADC_PATT_LEN_MAX 32 +#define CONFIG_SOC_ADC_DIGI_MIN_BITWIDTH 12 +#define CONFIG_SOC_ADC_DIGI_MAX_BITWIDTH 12 +#define CONFIG_SOC_ADC_DIGI_IIR_FILTER_NUM 2 +#define CONFIG_SOC_ADC_DIGI_RESULT_BYTES 2 +#define CONFIG_SOC_ADC_DIGI_DATA_BYTES_PER_CONV 2 +#define CONFIG_SOC_ADC_SAMPLE_FREQ_THRES_HIGH 83333 +#define CONFIG_SOC_ADC_SAMPLE_FREQ_THRES_LOW 611 +#define CONFIG_SOC_ADC_RTC_MIN_BITWIDTH 13 +#define CONFIG_SOC_ADC_RTC_MAX_BITWIDTH 13 +#define CONFIG_SOC_ADC_CALIBRATION_V1_SUPPORTED 1 +#define CONFIG_SOC_ADC_SELF_HW_CALI_SUPPORTED 1 +#define CONFIG_SOC_BROWNOUT_RESET_SUPPORTED 1 +#define CONFIG_SOC_CACHE_WRITEBACK_SUPPORTED 1 +#define CONFIG_SOC_CP_DMA_MAX_BUFFER_SIZE 4095 +#define CONFIG_SOC_CPU_CORES_NUM 1 +#define CONFIG_SOC_CPU_INTR_NUM 32 +#define CONFIG_SOC_CPU_BREAKPOINTS_NUM 2 +#define CONFIG_SOC_CPU_WATCHPOINTS_NUM 2 +#define CONFIG_SOC_CPU_WATCHPOINT_MAX_REGION_SIZE 64 +#define CONFIG_SOC_DAC_CHAN_NUM 2 +#define CONFIG_SOC_DAC_RESOLUTION 8 +#define CONFIG_SOC_GPIO_PORT 1 +#define CONFIG_SOC_GPIO_PIN_COUNT 47 +#define CONFIG_SOC_GPIO_SUPPORT_PIN_GLITCH_FILTER 1 +#define CONFIG_SOC_GPIO_FILTER_CLK_SUPPORT_APB 1 +#define CONFIG_SOC_GPIO_SUPPORT_RTC_INDEPENDENT 1 +#define CONFIG_SOC_GPIO_SUPPORT_FORCE_HOLD 1 +#define CONFIG_SOC_GPIO_VALID_GPIO_MASK 0x7FFFFFFFFFFF +#define CONFIG_SOC_GPIO_VALID_DIGITAL_IO_PAD_MASK 0x00007FFFFC000000 +#define CONFIG_SOC_DEDIC_GPIO_OUT_CHANNELS_NUM 8 +#define CONFIG_SOC_DEDIC_GPIO_IN_CHANNELS_NUM 8 +#define CONFIG_SOC_DEDIC_GPIO_ALLOW_REG_ACCESS 1 +#define CONFIG_SOC_DEDIC_GPIO_HAS_INTERRUPT 1 +#define CONFIG_SOC_DEDIC_GPIO_OUT_AUTO_ENABLE 1 +#define CONFIG_SOC_I2C_NUM 2 +#define CONFIG_SOC_I2C_FIFO_LEN 32 +#define CONFIG_SOC_I2C_CMD_REG_NUM 16 +#define CONFIG_SOC_I2C_SUPPORT_SLAVE 1 +#define CONFIG_SOC_I2C_SUPPORT_HW_CLR_BUS 1 +#define CONFIG_SOC_I2C_SUPPORT_REF_TICK 1 +#define CONFIG_SOC_I2C_SUPPORT_APB 1 +#define CONFIG_SOC_I2S_NUM 1 +#define CONFIG_SOC_I2S_HW_VERSION_1 1 +#define CONFIG_SOC_I2S_SUPPORTS_APLL 1 +#define CONFIG_SOC_I2S_SUPPORTS_PLL_F160M 1 +#define CONFIG_SOC_I2S_SUPPORTS_DMA_EQUAL 1 +#define CONFIG_SOC_I2S_SUPPORTS_LCD_CAMERA 1 +#define CONFIG_SOC_I2S_APLL_MIN_FREQ 250000000 +#define CONFIG_SOC_I2S_APLL_MAX_FREQ 500000000 +#define CONFIG_SOC_I2S_APLL_MIN_RATE 10675 +#define CONFIG_SOC_I2S_LCD_I80_VARIANT 1 +#define CONFIG_SOC_LCD_I80_SUPPORTED 1 +#define CONFIG_SOC_LCD_I80_BUSES 1 +#define CONFIG_SOC_LCD_I80_BUS_WIDTH 24 +#define CONFIG_SOC_LEDC_HAS_TIMER_SPECIFIC_MUX 1 +#define CONFIG_SOC_LEDC_SUPPORT_APB_CLOCK 1 +#define CONFIG_SOC_LEDC_SUPPORT_REF_TICK 1 +#define CONFIG_SOC_LEDC_SUPPORT_XTAL_CLOCK 1 +#define CONFIG_SOC_LEDC_CHANNEL_NUM 8 +#define CONFIG_SOC_LEDC_TIMER_BIT_WIDTH 14 +#define CONFIG_SOC_LEDC_SUPPORT_FADE_STOP 1 +#define CONFIG_SOC_MMU_LINEAR_ADDRESS_REGION_NUM 5 +#define CONFIG_SOC_MMU_PERIPH_NUM 1 +#define CONFIG_SOC_MPU_MIN_REGION_SIZE 0x20000000 +#define CONFIG_SOC_MPU_REGIONS_MAX_NUM 8 +#define CONFIG_SOC_PCNT_GROUPS 1 +#define CONFIG_SOC_PCNT_UNITS_PER_GROUP 4 +#define CONFIG_SOC_PCNT_CHANNELS_PER_UNIT 2 +#define CONFIG_SOC_PCNT_THRES_POINT_PER_UNIT 2 +#define CONFIG_SOC_RMT_GROUPS 1 +#define CONFIG_SOC_RMT_TX_CANDIDATES_PER_GROUP 4 +#define CONFIG_SOC_RMT_RX_CANDIDATES_PER_GROUP 4 +#define CONFIG_SOC_RMT_CHANNELS_PER_GROUP 4 +#define CONFIG_SOC_RMT_MEM_WORDS_PER_CHANNEL 64 +#define CONFIG_SOC_RMT_SUPPORT_RX_DEMODULATION 1 +#define CONFIG_SOC_RMT_SUPPORT_TX_ASYNC_STOP 1 +#define CONFIG_SOC_RMT_SUPPORT_TX_LOOP_COUNT 1 +#define CONFIG_SOC_RMT_SUPPORT_TX_SYNCHRO 1 +#define CONFIG_SOC_RMT_SUPPORT_TX_CARRIER_DATA_ONLY 1 +#define CONFIG_SOC_RMT_SUPPORT_REF_TICK 1 +#define CONFIG_SOC_RMT_SUPPORT_APB 1 +#define CONFIG_SOC_RMT_CHANNEL_CLK_INDEPENDENT 1 +#define CONFIG_SOC_RTCIO_PIN_COUNT 22 +#define CONFIG_SOC_RTCIO_INPUT_OUTPUT_SUPPORTED 1 +#define CONFIG_SOC_RTCIO_HOLD_SUPPORTED 1 +#define CONFIG_SOC_RTCIO_WAKE_SUPPORTED 1 +#define CONFIG_SOC_SDM_GROUPS 1 +#define CONFIG_SOC_SDM_CHANNELS_PER_GROUP 8 +#define CONFIG_SOC_SDM_CLK_SUPPORT_APB 1 +#define CONFIG_SOC_SPI_HD_BOTH_INOUT_SUPPORTED 1 +#define CONFIG_SOC_SPI_PERIPH_NUM 3 +#define CONFIG_SOC_SPI_DMA_CHAN_NUM 3 +#define CONFIG_SOC_SPI_MAX_CS_NUM 6 +#define CONFIG_SOC_SPI_MAXIMUM_BUFFER_SIZE 72 +#define CONFIG_SOC_SPI_MAX_PRE_DIVIDER 8192 +#define CONFIG_SOC_SPI_SUPPORT_DDRCLK 1 +#define CONFIG_SOC_SPI_SLAVE_SUPPORT_SEG_TRANS 1 +#define CONFIG_SOC_SPI_SUPPORT_CD_SIG 1 +#define CONFIG_SOC_SPI_SUPPORT_CONTINUOUS_TRANS 1 +#define CONFIG_SOC_SPI_SUPPORT_CLK_APB 1 +#define CONFIG_SOC_SPI_SUPPORT_SLAVE_HD_VER2 1 +#define CONFIG_SOC_SPI_PERIPH_SUPPORT_CONTROL_DUMMY_OUT 1 +#define CONFIG_SOC_MEMSPI_IS_INDEPENDENT 1 +#define CONFIG_SOC_SPI_SUPPORT_OCT 1 +#define CONFIG_SOC_MEMSPI_SRC_FREQ_80M_SUPPORTED 1 +#define CONFIG_SOC_MEMSPI_SRC_FREQ_40M_SUPPORTED 1 +#define CONFIG_SOC_MEMSPI_SRC_FREQ_26M_SUPPORTED 1 +#define CONFIG_SOC_MEMSPI_SRC_FREQ_20M_SUPPORTED 1 +#define CONFIG_SOC_SYSTIMER_COUNTER_NUM 1 +#define CONFIG_SOC_SYSTIMER_ALARM_NUM 3 +#define CONFIG_SOC_SYSTIMER_BIT_WIDTH_LO 32 +#define CONFIG_SOC_SYSTIMER_BIT_WIDTH_HI 32 +#define CONFIG_SOC_TIMER_GROUPS 2 +#define CONFIG_SOC_TIMER_GROUP_TIMERS_PER_GROUP 2 +#define CONFIG_SOC_TIMER_GROUP_COUNTER_BIT_WIDTH 64 +#define CONFIG_SOC_TIMER_GROUP_SUPPORT_XTAL 1 +#define CONFIG_SOC_TIMER_GROUP_SUPPORT_APB 1 +#define CONFIG_SOC_TIMER_GROUP_TOTAL_TIMERS 4 +#define CONFIG_SOC_TOUCH_VERSION_2 1 +#define CONFIG_SOC_TOUCH_SENSOR_NUM 15 +#define CONFIG_SOC_TOUCH_PROXIMITY_CHANNEL_NUM 3 +#define CONFIG_SOC_TOUCH_PAD_THRESHOLD_MAX 0x1FFFFF +#define CONFIG_SOC_TOUCH_PAD_MEASURE_WAIT_MAX 0xFF +#define CONFIG_SOC_TWAI_CONTROLLER_NUM 1 +#define CONFIG_SOC_TWAI_CLK_SUPPORT_APB 1 +#define CONFIG_SOC_TWAI_BRP_MIN 2 +#define CONFIG_SOC_TWAI_BRP_MAX 32768 +#define CONFIG_SOC_TWAI_SUPPORTS_RX_STATUS 1 +#define CONFIG_SOC_UART_NUM 2 +#define CONFIG_SOC_UART_SUPPORT_WAKEUP_INT 1 +#define CONFIG_SOC_UART_SUPPORT_APB_CLK 1 +#define CONFIG_SOC_UART_SUPPORT_REF_TICK 1 +#define CONFIG_SOC_UART_FIFO_LEN 128 +#define CONFIG_SOC_UART_BITRATE_MAX 5000000 +#define CONFIG_SOC_SPIRAM_SUPPORTED 1 +#define CONFIG_SOC_SPIRAM_XIP_SUPPORTED 1 +#define CONFIG_SOC_USB_OTG_PERIPH_NUM 1 +#define CONFIG_SOC_SHA_DMA_MAX_BUFFER_SIZE 3968 +#define CONFIG_SOC_SHA_SUPPORT_DMA 1 +#define CONFIG_SOC_SHA_SUPPORT_RESUME 1 +#define CONFIG_SOC_SHA_CRYPTO_DMA 1 +#define CONFIG_SOC_SHA_SUPPORT_SHA1 1 +#define CONFIG_SOC_SHA_SUPPORT_SHA224 1 +#define CONFIG_SOC_SHA_SUPPORT_SHA256 1 +#define CONFIG_SOC_SHA_SUPPORT_SHA384 1 +#define CONFIG_SOC_SHA_SUPPORT_SHA512 1 +#define CONFIG_SOC_SHA_SUPPORT_SHA512_224 1 +#define CONFIG_SOC_SHA_SUPPORT_SHA512_256 1 +#define CONFIG_SOC_SHA_SUPPORT_SHA512_T 1 +#define CONFIG_SOC_RSA_MAX_BIT_LEN 4096 +#define CONFIG_SOC_AES_SUPPORT_DMA 1 +#define CONFIG_SOC_AES_SUPPORT_GCM 1 +#define CONFIG_SOC_EFUSE_DIS_DOWNLOAD_ICACHE 1 +#define CONFIG_SOC_EFUSE_DIS_DOWNLOAD_DCACHE 1 +#define CONFIG_SOC_EFUSE_HARD_DIS_JTAG 1 +#define CONFIG_SOC_EFUSE_SOFT_DIS_JTAG 1 +#define CONFIG_SOC_EFUSE_DIS_BOOT_REMAP 1 +#define CONFIG_SOC_EFUSE_DIS_LEGACY_SPI_BOOT 1 +#define CONFIG_SOC_EFUSE_DIS_ICACHE 1 +#define CONFIG_SOC_SECURE_BOOT_V2_RSA 1 +#define CONFIG_SOC_EFUSE_SECURE_BOOT_KEY_DIGESTS 3 +#define CONFIG_SOC_EFUSE_REVOKE_BOOT_KEY_DIGESTS 1 +#define CONFIG_SOC_SUPPORT_SECURE_BOOT_REVOKE_KEY 1 +#define CONFIG_SOC_FLASH_ENCRYPTED_XTS_AES_BLOCK_MAX 64 +#define CONFIG_SOC_FLASH_ENCRYPTION_XTS_AES 1 +#define CONFIG_SOC_FLASH_ENCRYPTION_XTS_AES_OPTIONS 1 +#define CONFIG_SOC_FLASH_ENCRYPTION_XTS_AES_128 1 +#define CONFIG_SOC_FLASH_ENCRYPTION_XTS_AES_256 1 +#define CONFIG_SOC_MEMPROT_CPU_PREFETCH_PAD_SIZE 16 +#define CONFIG_SOC_MEMPROT_MEM_ALIGN_SIZE 4 +#define CONFIG_SOC_AES_CRYPTO_DMA 1 +#define CONFIG_SOC_AES_SUPPORT_AES_128 1 +#define CONFIG_SOC_AES_SUPPORT_AES_192 1 +#define CONFIG_SOC_AES_SUPPORT_AES_256 1 +#define CONFIG_SOC_PHY_DIG_REGS_MEM_SIZE 21 +#define CONFIG_SOC_WIFI_LIGHT_SLEEP_CLK_WIDTH 12 +#define CONFIG_SOC_SPI_MEM_SUPPORT_AUTO_WAIT_IDLE 1 +#define CONFIG_SOC_SPI_MEM_SUPPORT_AUTO_SUSPEND 1 +#define CONFIG_SOC_SPI_MEM_SUPPORT_SW_SUSPEND 1 +#define CONFIG_SOC_SPI_MEM_SUPPORT_CONFIG_GPIO_BY_EFUSE 1 +#define CONFIG_SOC_SPI_MEM_SUPPORT_WRAP 1 +#define CONFIG_SOC_PM_SUPPORT_EXT0_WAKEUP 1 +#define CONFIG_SOC_PM_SUPPORT_EXT1_WAKEUP 1 +#define CONFIG_SOC_PM_SUPPORT_EXT_WAKEUP 1 +#define CONFIG_SOC_PM_SUPPORT_WIFI_WAKEUP 1 +#define CONFIG_SOC_PM_SUPPORT_TOUCH_SENSOR_WAKEUP 1 +#define CONFIG_SOC_PM_SUPPORT_WIFI_PD 1 +#define CONFIG_SOC_PM_SUPPORT_RTC_PERIPH_PD 1 +#define CONFIG_SOC_PM_SUPPORT_RTC_FAST_MEM_PD 1 +#define CONFIG_SOC_PM_SUPPORT_RTC_SLOW_MEM_PD 1 +#define CONFIG_SOC_PM_SUPPORT_RC_FAST_PD 1 +#define CONFIG_SOC_PM_SUPPORT_VDDSDIO_PD 1 +#define CONFIG_SOC_CONFIGURABLE_VDDSDIO_SUPPORTED 1 +#define CONFIG_SOC_CLK_APLL_SUPPORTED 1 +#define CONFIG_SOC_APLL_MULTIPLIER_OUT_MIN_HZ 350000000 +#define CONFIG_SOC_APLL_MULTIPLIER_OUT_MAX_HZ 500000000 +#define CONFIG_SOC_APLL_MIN_HZ 5303031 +#define CONFIG_SOC_APLL_MAX_HZ 125000000 +#define CONFIG_SOC_CLK_RC_FAST_D256_SUPPORTED 1 +#define CONFIG_SOC_RTC_SLOW_CLK_SUPPORT_RC_FAST_D256 1 +#define CONFIG_SOC_CLK_RC_FAST_SUPPORT_CALIBRATION 1 +#define CONFIG_SOC_CLK_XTAL32K_SUPPORTED 1 +#define CONFIG_SOC_COEX_HW_PTI 1 +#define CONFIG_SOC_EXTERNAL_COEX_LEADER_TX_LINE 1 +#define CONFIG_SOC_TEMPERATURE_SENSOR_SUPPORT_FAST_RC 1 +#define CONFIG_SOC_WIFI_HW_TSF 1 +#define CONFIG_SOC_WIFI_FTM_SUPPORT 1 +#define CONFIG_SOC_WIFI_WAPI_SUPPORT 1 +#define CONFIG_SOC_WIFI_CSI_SUPPORT 1 +#define CONFIG_SOC_WIFI_MESH_SUPPORT 1 +#define CONFIG_SOC_WIFI_SUPPORT_VARIABLE_BEACON_WINDOW 1 +#define CONFIG_SOC_WIFI_NAN_SUPPORT 1 +#define CONFIG_SOC_ULP_HAS_ADC 1 +#define CONFIG_IDF_CMAKE 1 +#define CONFIG_IDF_TARGET_ARCH_XTENSA 1 +#define CONFIG_IDF_TARGET_ARCH "xtensa" +#define CONFIG_IDF_TARGET "esp32s2" +#define CONFIG_IDF_TARGET_ESP32S2 1 +#define CONFIG_IDF_FIRMWARE_CHIP_ID 0x0002 +#define CONFIG_APP_BUILD_TYPE_APP_2NDBOOT 1 +#define CONFIG_APP_BUILD_GENERATE_BINARIES 1 +#define CONFIG_APP_BUILD_BOOTLOADER 1 +#define CONFIG_APP_BUILD_USE_FLASH_SECTIONS 1 +#define CONFIG_BOOTLOADER_OFFSET_IN_FLASH 0x1000 +#define CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_SIZE 1 +#define CONFIG_BOOTLOADER_LOG_LEVEL_INFO 1 +#define CONFIG_BOOTLOADER_LOG_LEVEL 3 +#define CONFIG_BOOTLOADER_VDDSDIO_BOOST_1_9V 1 +#define CONFIG_BOOTLOADER_REGION_PROTECTION_ENABLE 1 +#define CONFIG_BOOTLOADER_WDT_ENABLE 1 +#define CONFIG_BOOTLOADER_WDT_TIME_MS 9000 +#define CONFIG_BOOTLOADER_RESERVE_RTC_SIZE 0x0 +#define CONFIG_BOOTLOADER_FLASH_XMC_SUPPORT 1 +#define CONFIG_SECURE_BOOT_V2_RSA_SUPPORTED 1 +#define CONFIG_SECURE_BOOT_V2_PREFERRED 1 +#define CONFIG_SECURE_ROM_DL_MODE_ENABLED 1 +#define CONFIG_APP_COMPILE_TIME_DATE 1 +#define CONFIG_APP_RETRIEVE_LEN_ELF_SHA 16 +#define CONFIG_ESP_ROM_HAS_CRC_LE 1 +#define CONFIG_ESP_ROM_HAS_MZ_CRC32 1 +#define CONFIG_ESP_ROM_HAS_UART_BUF_SWITCH 1 +#define CONFIG_ESP_ROM_NEEDS_SWSETUP_WORKAROUND 1 +#define CONFIG_ESP_ROM_HAS_REGI2C_BUG 1 +#define CONFIG_ESP_ROM_HAS_NEWLIB_NANO_FORMAT 1 +#define CONFIG_ESP_ROM_HAS_FLASH_COUNT_PAGES_BUG 1 +#define CONFIG_ESP_ROM_USB_OTG_NUM 3 +#define CONFIG_BOOT_ROM_LOG_ALWAYS_ON 1 +#define CONFIG_ESPTOOLPY_FLASHMODE_DIO 1 +#define CONFIG_ESPTOOLPY_FLASH_SAMPLE_MODE_STR 1 +#define CONFIG_ESPTOOLPY_FLASHMODE "dio" +#define CONFIG_ESPTOOLPY_FLASHFREQ_80M 1 +#define CONFIG_ESPTOOLPY_FLASHFREQ_80M_DEFAULT 1 +#define CONFIG_ESPTOOLPY_FLASHFREQ "80m" +#define CONFIG_ESPTOOLPY_FLASHSIZE_2MB 1 +#define CONFIG_ESPTOOLPY_FLASHSIZE "2MB" +#define CONFIG_ESPTOOLPY_BEFORE_RESET 1 +#define CONFIG_ESPTOOLPY_BEFORE "default_reset" +#define CONFIG_ESPTOOLPY_AFTER_RESET 1 +#define CONFIG_ESPTOOLPY_AFTER "hard_reset" +#define CONFIG_ESPTOOLPY_MONITOR_BAUD 115200 +#define CONFIG_PARTITION_TABLE_SINGLE_APP 1 +#define CONFIG_PARTITION_TABLE_CUSTOM_FILENAME "partitions.csv" +#define CONFIG_PARTITION_TABLE_FILENAME "partitions_singleapp.csv" +#define CONFIG_PARTITION_TABLE_OFFSET 0x8000 +#define CONFIG_PARTITION_TABLE_MD5 1 +#define CONFIG_COMPILER_OPTIMIZATION_SIZE 1 +#define CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_ENABLE 1 +#define CONFIG_COMPILER_FLOAT_LIB_FROM_GCCLIB 1 +#define CONFIG_COMPILER_OPTIMIZATION_ASSERTION_LEVEL 2 +#define CONFIG_COMPILER_HIDE_PATHS_MACROS 1 +#define CONFIG_COMPILER_STACK_CHECK_MODE_NONE 1 +#define CONFIG_APPTRACE_DEST_NONE 1 +#define CONFIG_APPTRACE_DEST_UART_NONE 1 +#define CONFIG_APPTRACE_UART_TASK_PRIO 1 +#define CONFIG_APPTRACE_LOCK_ENABLE 1 +#define CONFIG_ADC_DISABLE_DAC 1 +#define CONFIG_SPI_MASTER_ISR_IN_IRAM 1 +#define CONFIG_SPI_SLAVE_ISR_IN_IRAM 1 +#define CONFIG_TWAI_ERRATA_FIX_LISTEN_ONLY_DOM 1 +#define CONFIG_GPTIMER_ISR_HANDLER_IN_IRAM 1 +#define CONFIG_EFUSE_MAX_BLK_LEN 256 +#define CONFIG_ESP_TLS_USING_MBEDTLS 1 +#define CONFIG_ESP_TLS_USE_DS_PERIPHERAL 1 +#define CONFIG_ADC_DISABLE_DAC_OUTPUT 1 +#define CONFIG_ESP_ERR_TO_NAME_LOOKUP 1 +#define CONFIG_ETH_ENABLED 1 +#define CONFIG_ETH_USE_SPI_ETHERNET 1 +#define CONFIG_ESP_EVENT_POST_FROM_ISR 1 +#define CONFIG_ESP_EVENT_POST_FROM_IRAM_ISR 1 +#define CONFIG_ESP_HTTP_CLIENT_ENABLE_HTTPS 1 +#define CONFIG_HTTPD_MAX_REQ_HDR_LEN 512 +#define CONFIG_HTTPD_MAX_URI_LEN 512 +#define CONFIG_HTTPD_ERR_RESP_NO_DELAY 1 +#define CONFIG_HTTPD_PURGE_BUF_LEN 32 +#define CONFIG_ESP32S2_REV_MIN_0 1 +#define CONFIG_ESP32S2_REV_MIN_FULL 0 +#define CONFIG_ESP_REV_MIN_FULL 0 +#define CONFIG_ESP32S2_REV_MAX_FULL 199 +#define CONFIG_ESP_REV_MAX_FULL 199 +#define CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_STA 1 +#define CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_AP 1 +#define CONFIG_ESP_MAC_UNIVERSAL_MAC_ADDRESSES_TWO 1 +#define CONFIG_ESP32S2_UNIVERSAL_MAC_ADDRESSES_TWO 1 +#define CONFIG_ESP32S2_UNIVERSAL_MAC_ADDRESSES 2 +#define CONFIG_ESP_SLEEP_FLASH_LEAKAGE_WORKAROUND 1 +#define CONFIG_ESP_SLEEP_RTC_BUS_ISO_WORKAROUND 1 +#define CONFIG_ESP_SLEEP_WAIT_FLASH_READY_EXTRA_DELAY 0 +#define CONFIG_ESP_SLEEP_GPIO_ENABLE_INTERNAL_RESISTORS 1 +#define CONFIG_RTC_CLK_SRC_INT_RC 1 +#define CONFIG_RTC_CLK_CAL_CYCLES 576 +#define CONFIG_PERIPH_CTRL_FUNC_IN_IRAM 1 +#define CONFIG_XTAL_FREQ_40 1 +#define CONFIG_XTAL_FREQ 40 +#define CONFIG_LCD_PANEL_IO_FORMAT_BUF_SIZE 32 +#define CONFIG_ESP_NETIF_IP_LOST_TIMER_INTERVAL 120 +#define CONFIG_ESP_NETIF_TCPIP_LWIP 1 +#define CONFIG_ESP_NETIF_USES_TCPIP_WITH_BSD_API 1 +#define CONFIG_ESP_PHY_CALIBRATION_AND_DATA_STORAGE 1 +#define CONFIG_ESP_PHY_MAX_WIFI_TX_POWER 20 +#define CONFIG_ESP_PHY_MAX_TX_POWER 20 +#define CONFIG_ESP_PHY_RF_CAL_PARTIAL 1 +#define CONFIG_ESP_PHY_CALIBRATION_MODE 0 +#define CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ_160 1 +#define CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ 160 +#define CONFIG_ESP32S2_INSTRUCTION_CACHE_8KB 1 +#define CONFIG_ESP32S2_INSTRUCTION_CACHE_LINE_32B 1 +#define CONFIG_ESP32S2_DATA_CACHE_8KB 1 +#define CONFIG_ESP32S2_DATA_CACHE_LINE_32B 1 +#define CONFIG_ESP32S2_TRACEMEM_RESERVE_DRAM 0x0 +#define CONFIG_ESP_SYSTEM_PANIC_PRINT_REBOOT 1 +#define CONFIG_ESP_SYSTEM_PANIC_REBOOT_DELAY_SECONDS 0 +#define CONFIG_ESP_SYSTEM_SINGLE_CORE_MODE 1 +#define CONFIG_ESP_SYSTEM_RTC_FAST_MEM_AS_HEAP_DEPCHECK 1 +#define CONFIG_ESP_SYSTEM_ALLOW_RTC_FAST_MEM_AS_HEAP 1 +#define CONFIG_ESP_SYSTEM_MEMPROT_FEATURE 1 +#define CONFIG_ESP_SYSTEM_MEMPROT_FEATURE_LOCK 1 +#define CONFIG_ESP_SYSTEM_EVENT_QUEUE_SIZE 32 +#define CONFIG_ESP_SYSTEM_EVENT_TASK_STACK_SIZE 2304 +#define CONFIG_ESP_MAIN_TASK_STACK_SIZE 3584 +#define CONFIG_ESP_MAIN_TASK_AFFINITY_CPU0 1 +#define CONFIG_ESP_MAIN_TASK_AFFINITY 0x0 +#define CONFIG_ESP_MINIMAL_SHARED_STACK_SIZE 2048 +#define CONFIG_ESP_CONSOLE_UART_DEFAULT 1 +#define CONFIG_ESP_CONSOLE_UART 1 +#define CONFIG_ESP_CONSOLE_MULTIPLE_UART 1 +#define CONFIG_ESP_CONSOLE_UART_NUM 0 +#define CONFIG_ESP_CONSOLE_UART_BAUDRATE 115200 +#define CONFIG_ESP_INT_WDT 1 +#define CONFIG_ESP_INT_WDT_TIMEOUT_MS 300 +#define CONFIG_ESP_TASK_WDT_EN 1 +#define CONFIG_ESP_TASK_WDT_INIT 1 +#define CONFIG_ESP_TASK_WDT_TIMEOUT_S 5 +#define CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU0 1 +#define CONFIG_ESP_DEBUG_OCDAWARE 1 +#define CONFIG_ESP_SYSTEM_CHECK_INT_LEVEL_4 1 +#define CONFIG_ESP_BROWNOUT_DET 1 +#define CONFIG_ESP_BROWNOUT_DET_LVL_SEL_7 1 +#define CONFIG_ESP_BROWNOUT_DET_LVL 7 +#define CONFIG_ESP_SYSTEM_BROWNOUT_INTR 1 +#define CONFIG_ESP_IPC_TASK_STACK_SIZE 1024 +#define CONFIG_ESP_TIME_FUNCS_USE_RTC_TIMER 1 +#define CONFIG_ESP_TIME_FUNCS_USE_ESP_TIMER 1 +#define CONFIG_ESP_TIMER_TASK_STACK_SIZE 3584 +#define CONFIG_ESP_TIMER_INTERRUPT_LEVEL 1 +#define CONFIG_ESP_TIMER_TASK_AFFINITY 0x0 +#define CONFIG_ESP_TIMER_TASK_AFFINITY_CPU0 1 +#define CONFIG_ESP_TIMER_ISR_AFFINITY 0x1 +#define CONFIG_ESP_TIMER_ISR_AFFINITY_CPU0 1 +#define CONFIG_ESP_TIMER_IMPL_SYSTIMER 1 +#define CONFIG_ESP_WIFI_ENABLED 1 +#define CONFIG_ESP_WIFI_STATIC_RX_BUFFER_NUM 10 +#define CONFIG_ESP_WIFI_DYNAMIC_RX_BUFFER_NUM 32 +#define CONFIG_ESP_WIFI_DYNAMIC_TX_BUFFER 1 +#define CONFIG_ESP_WIFI_TX_BUFFER_TYPE 1 +#define CONFIG_ESP_WIFI_DYNAMIC_TX_BUFFER_NUM 32 +#define CONFIG_ESP_WIFI_STATIC_RX_MGMT_BUFFER 1 +#define CONFIG_ESP_WIFI_DYNAMIC_RX_MGMT_BUF 0 +#define CONFIG_ESP_WIFI_RX_MGMT_BUF_NUM_DEF 5 +#define CONFIG_ESP_WIFI_AMPDU_TX_ENABLED 1 +#define CONFIG_ESP_WIFI_TX_BA_WIN 6 +#define CONFIG_ESP_WIFI_AMPDU_RX_ENABLED 1 +#define CONFIG_ESP_WIFI_RX_BA_WIN 6 +#define CONFIG_ESP_WIFI_NVS_ENABLED 1 +#define CONFIG_ESP_WIFI_SOFTAP_BEACON_MAX_LEN 752 +#define CONFIG_ESP_WIFI_MGMT_SBUF_NUM 32 +#define CONFIG_ESP_WIFI_IRAM_OPT 1 +#define CONFIG_ESP_WIFI_RX_IRAM_OPT 1 +#define CONFIG_ESP_WIFI_ENABLE_WPA3_SAE 1 +#define CONFIG_ESP_WIFI_ENABLE_SAE_PK 1 +#define CONFIG_ESP_WIFI_SOFTAP_SAE_SUPPORT 1 +#define CONFIG_ESP_WIFI_STA_DISCONNECTED_PM_ENABLE 1 +#define CONFIG_ESP_WIFI_SOFTAP_SUPPORT 1 +#define CONFIG_ESP_WIFI_ESPNOW_MAX_ENCRYPT_NUM 7 +#define CONFIG_ESP_WIFI_MBEDTLS_CRYPTO 1 +#define CONFIG_ESP_WIFI_ENTERPRISE_SUPPORT 1 +#define CONFIG_ESP_COREDUMP_ENABLE_TO_NONE 1 +#define CONFIG_FATFS_VOLUME_COUNT 2 +#define CONFIG_FATFS_LFN_NONE 1 +#define CONFIG_FATFS_SECTOR_4096 1 +#define CONFIG_FATFS_CODEPAGE_437 1 +#define CONFIG_FATFS_CODEPAGE 437 +#define CONFIG_FATFS_FS_LOCK 0 +#define CONFIG_FATFS_TIMEOUT_MS 10000 +#define CONFIG_FATFS_PER_FILE_CACHE 1 +#define CONFIG_FATFS_VFS_FSTAT_BLKSIZE 0 +#define CONFIG_FREERTOS_UNICORE 1 +#define CONFIG_FREERTOS_HZ 100 +#define CONFIG_FREERTOS_OPTIMIZED_SCHEDULER 1 +#define CONFIG_FREERTOS_CHECK_STACKOVERFLOW_CANARY 1 +#define CONFIG_FREERTOS_THREAD_LOCAL_STORAGE_POINTERS 1 +#define CONFIG_FREERTOS_IDLE_TASK_STACKSIZE 1536 +#define CONFIG_FREERTOS_MAX_TASK_NAME_LEN 16 +#define CONFIG_FREERTOS_TIMER_TASK_PRIORITY 1 +#define CONFIG_FREERTOS_TIMER_TASK_STACK_DEPTH 2048 +#define CONFIG_FREERTOS_TIMER_QUEUE_LENGTH 10 +#define CONFIG_FREERTOS_QUEUE_REGISTRY_SIZE 0 +#define CONFIG_FREERTOS_TASK_NOTIFICATION_ARRAY_ENTRIES 1 +#define CONFIG_FREERTOS_TLSP_DELETION_CALLBACKS 1 +#define CONFIG_FREERTOS_CHECK_MUTEX_GIVEN_BY_OWNER 1 +#define CONFIG_FREERTOS_ISR_STACKSIZE 1536 +#define CONFIG_FREERTOS_INTERRUPT_BACKTRACE 1 +#define CONFIG_FREERTOS_TICK_SUPPORT_CORETIMER 1 +#define CONFIG_FREERTOS_CORETIMER_0 1 +#define CONFIG_FREERTOS_SYSTICK_USES_CCOUNT 1 +#define CONFIG_FREERTOS_ENABLE_TASK_SNAPSHOT 1 +#define CONFIG_FREERTOS_NO_AFFINITY 0x7FFFFFFF +#define CONFIG_FREERTOS_SUPPORT_STATIC_ALLOCATION 1 +#define CONFIG_FREERTOS_DEBUG_OCDAWARE 1 +#define CONFIG_HAL_ASSERTION_EQUALS_SYSTEM 1 +#define CONFIG_HAL_DEFAULT_ASSERTION_LEVEL 2 +#define CONFIG_HAL_SPI_MASTER_FUNC_IN_IRAM 1 +#define CONFIG_HAL_SPI_SLAVE_FUNC_IN_IRAM 1 +#define CONFIG_HEAP_POISONING_DISABLED 1 +#define CONFIG_HEAP_TRACING_OFF 1 +#define CONFIG_LOG_DEFAULT_LEVEL_INFO 1 +#define CONFIG_LOG_DEFAULT_LEVEL 3 +#define CONFIG_LOG_MAXIMUM_EQUALS_DEFAULT 1 +#define CONFIG_LOG_MAXIMUM_LEVEL 3 +#define CONFIG_LOG_COLORS 1 +#define CONFIG_LOG_TIMESTAMP_SOURCE_RTOS 1 +#define CONFIG_LWIP_LOCAL_HOSTNAME "espressif" +#define CONFIG_LWIP_TCPIP_TASK_PRIO 18 +#define CONFIG_LWIP_DNS_SUPPORT_MDNS_QUERIES 1 +#define CONFIG_LWIP_TIMERS_ONDEMAND 1 +#define CONFIG_LWIP_ND6 1 +#define CONFIG_LWIP_MAX_SOCKETS 10 +#define CONFIG_LWIP_SO_REUSE 1 +#define CONFIG_LWIP_SO_REUSE_RXTOALL 1 +#define CONFIG_LWIP_IP4_FRAG 1 +#define CONFIG_LWIP_IP6_FRAG 1 +#define CONFIG_LWIP_IP_REASS_MAX_PBUFS 10 +#define CONFIG_LWIP_ESP_GRATUITOUS_ARP 1 +#define CONFIG_LWIP_GARP_TMR_INTERVAL 60 +#define CONFIG_LWIP_ESP_MLDV6_REPORT 1 +#define CONFIG_LWIP_MLDV6_TMR_INTERVAL 40 +#define CONFIG_LWIP_TCPIP_RECVMBOX_SIZE 32 +#define CONFIG_LWIP_DHCP_DOES_ARP_CHECK 1 +#define CONFIG_LWIP_DHCP_DISABLE_VENDOR_CLASS_ID 1 +#define CONFIG_LWIP_DHCP_OPTIONS_LEN 68 +#define CONFIG_LWIP_NUM_NETIF_CLIENT_DATA 0 +#define CONFIG_LWIP_DHCP_COARSE_TIMER_SECS 1 +#define CONFIG_LWIP_DHCPS 1 +#define CONFIG_LWIP_DHCPS_LEASE_UNIT 60 +#define CONFIG_LWIP_DHCPS_MAX_STATION_NUM 8 +#define CONFIG_LWIP_IPV4 1 +#define CONFIG_LWIP_IPV6 1 +#define CONFIG_LWIP_IPV6_NUM_ADDRESSES 3 +#define CONFIG_LWIP_NETIF_LOOPBACK 1 +#define CONFIG_LWIP_LOOPBACK_MAX_PBUFS 8 +#define CONFIG_LWIP_MAX_ACTIVE_TCP 16 +#define CONFIG_LWIP_MAX_LISTENING_TCP 16 +#define CONFIG_LWIP_TCP_HIGH_SPEED_RETRANSMISSION 1 +#define CONFIG_LWIP_TCP_MAXRTX 12 +#define CONFIG_LWIP_TCP_SYNMAXRTX 12 +#define CONFIG_LWIP_TCP_MSS 1440 +#define CONFIG_LWIP_TCP_TMR_INTERVAL 250 +#define CONFIG_LWIP_TCP_MSL 60000 +#define CONFIG_LWIP_TCP_FIN_WAIT_TIMEOUT 20000 +#define CONFIG_LWIP_TCP_SND_BUF_DEFAULT 5760 +#define CONFIG_LWIP_TCP_WND_DEFAULT 5760 +#define CONFIG_LWIP_TCP_RECVMBOX_SIZE 6 +#define CONFIG_LWIP_TCP_QUEUE_OOSEQ 1 +#define CONFIG_LWIP_TCP_OOSEQ_TIMEOUT 6 +#define CONFIG_LWIP_TCP_OOSEQ_MAX_PBUFS 4 +#define CONFIG_LWIP_TCP_OVERSIZE_MSS 1 +#define CONFIG_LWIP_TCP_RTO_TIME 1500 +#define CONFIG_LWIP_MAX_UDP_PCBS 16 +#define CONFIG_LWIP_UDP_RECVMBOX_SIZE 6 +#define CONFIG_LWIP_CHECKSUM_CHECK_ICMP 1 +#define CONFIG_LWIP_TCPIP_TASK_STACK_SIZE 3072 +#define CONFIG_LWIP_TCPIP_TASK_AFFINITY_NO_AFFINITY 1 +#define CONFIG_LWIP_TCPIP_TASK_AFFINITY 0x7FFFFFFF +#define CONFIG_LWIP_IPV6_MEMP_NUM_ND6_QUEUE 3 +#define CONFIG_LWIP_IPV6_ND6_NUM_NEIGHBORS 5 +#define CONFIG_LWIP_ICMP 1 +#define CONFIG_LWIP_MAX_RAW_PCBS 16 +#define CONFIG_LWIP_SNTP_MAX_SERVERS 1 +#define CONFIG_LWIP_SNTP_UPDATE_DELAY 3600000 +#define CONFIG_LWIP_BRIDGEIF_MAX_PORTS 7 +#define CONFIG_LWIP_ESP_LWIP_ASSERT 1 +#define CONFIG_LWIP_HOOK_TCP_ISN_DEFAULT 1 +#define CONFIG_LWIP_HOOK_IP6_ROUTE_NONE 1 +#define CONFIG_LWIP_HOOK_ND6_GET_GW_NONE 1 +#define CONFIG_LWIP_HOOK_IP6_SELECT_SRC_ADDR_NONE 1 +#define CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_NONE 1 +#define CONFIG_LWIP_HOOK_IP6_INPUT_NONE 1 +#define CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC 1 +#define CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN 1 +#define CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN 16384 +#define CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN 4096 +#define CONFIG_MBEDTLS_SSL_KEEP_PEER_CERTIFICATE 1 +#define CONFIG_MBEDTLS_PKCS7_C 1 +#define CONFIG_MBEDTLS_CERTIFICATE_BUNDLE 1 +#define CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_FULL 1 +#define CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_MAX_CERTS 200 +#define CONFIG_MBEDTLS_CMAC_C 1 +#define CONFIG_MBEDTLS_HARDWARE_AES 1 +#define CONFIG_MBEDTLS_AES_USE_INTERRUPT 1 +#define CONFIG_MBEDTLS_HARDWARE_GCM 1 +#define CONFIG_MBEDTLS_HARDWARE_MPI 1 +#define CONFIG_MBEDTLS_MPI_USE_INTERRUPT 1 +#define CONFIG_MBEDTLS_HARDWARE_SHA 1 +#define CONFIG_MBEDTLS_ROM_MD5 1 +#define CONFIG_MBEDTLS_HAVE_TIME 1 +#define CONFIG_MBEDTLS_ECDSA_DETERMINISTIC 1 +#define CONFIG_MBEDTLS_SHA512_C 1 +#define CONFIG_MBEDTLS_TLS_SERVER_AND_CLIENT 1 +#define CONFIG_MBEDTLS_TLS_SERVER 1 +#define CONFIG_MBEDTLS_TLS_CLIENT 1 +#define CONFIG_MBEDTLS_TLS_ENABLED 1 +#define CONFIG_MBEDTLS_KEY_EXCHANGE_RSA 1 +#define CONFIG_MBEDTLS_KEY_EXCHANGE_ELLIPTIC_CURVE 1 +#define CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_RSA 1 +#define CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA 1 +#define CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA 1 +#define CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_RSA 1 +#define CONFIG_MBEDTLS_SSL_RENEGOTIATION 1 +#define CONFIG_MBEDTLS_SSL_PROTO_TLS1_2 1 +#define CONFIG_MBEDTLS_SSL_ALPN 1 +#define CONFIG_MBEDTLS_CLIENT_SSL_SESSION_TICKETS 1 +#define CONFIG_MBEDTLS_SERVER_SSL_SESSION_TICKETS 1 +#define CONFIG_MBEDTLS_AES_C 1 +#define CONFIG_MBEDTLS_CCM_C 1 +#define CONFIG_MBEDTLS_GCM_C 1 +#define CONFIG_MBEDTLS_PEM_PARSE_C 1 +#define CONFIG_MBEDTLS_PEM_WRITE_C 1 +#define CONFIG_MBEDTLS_X509_CRL_PARSE_C 1 +#define CONFIG_MBEDTLS_X509_CSR_PARSE_C 1 +#define CONFIG_MBEDTLS_ECP_C 1 +#define CONFIG_MBEDTLS_ECDH_C 1 +#define CONFIG_MBEDTLS_ECDSA_C 1 +#define CONFIG_MBEDTLS_ECP_DP_SECP192R1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_SECP224R1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_SECP256R1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_SECP384R1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_SECP521R1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_SECP192K1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_SECP224K1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_SECP256K1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_BP256R1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_BP384R1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_BP512R1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_CURVE25519_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_NIST_OPTIM 1 +#define CONFIG_MBEDTLS_ECP_FIXED_POINT_OPTIM 1 +#define CONFIG_MQTT_PROTOCOL_311 1 +#define CONFIG_MQTT_TRANSPORT_SSL 1 +#define CONFIG_MQTT_TRANSPORT_WEBSOCKET 1 +#define CONFIG_MQTT_TRANSPORT_WEBSOCKET_SECURE 1 +#define CONFIG_NEWLIB_STDOUT_LINE_ENDING_CRLF 1 +#define CONFIG_NEWLIB_STDIN_LINE_ENDING_CR 1 +#define CONFIG_NEWLIB_TIME_SYSCALL_USE_RTC_HRT 1 +#define CONFIG_OPENTHREAD_NETWORK_NAME "OpenThread-ESP" +#define CONFIG_OPENTHREAD_MESH_LOCAL_PREFIX "fd00:db8:a0:0::/64" +#define CONFIG_OPENTHREAD_NETWORK_CHANNEL 15 +#define CONFIG_OPENTHREAD_NETWORK_PANID 0x1234 +#define CONFIG_OPENTHREAD_NETWORK_EXTPANID "dead00beef00cafe" +#define CONFIG_OPENTHREAD_NETWORK_MASTERKEY "00112233445566778899aabbccddeeff" +#define CONFIG_OPENTHREAD_NETWORK_PSKC "104810e2315100afd6bc9215a6bfac53" +#define CONFIG_OPENTHREAD_XTAL_ACCURACY 130 +#define CONFIG_ESP_PROTOCOMM_SUPPORT_SECURITY_VERSION_0 1 +#define CONFIG_ESP_PROTOCOMM_SUPPORT_SECURITY_VERSION_1 1 +#define CONFIG_ESP_PROTOCOMM_SUPPORT_SECURITY_VERSION_2 1 +#define CONFIG_PTHREAD_TASK_PRIO_DEFAULT 5 +#define CONFIG_PTHREAD_TASK_STACK_SIZE_DEFAULT 3072 +#define CONFIG_PTHREAD_TASK_CORE_DEFAULT -1 +#define CONFIG_PTHREAD_TASK_NAME_DEFAULT "pthread" +#define CONFIG_MMU_PAGE_SIZE_64KB 1 +#define CONFIG_MMU_PAGE_MODE "64KB" +#define CONFIG_MMU_PAGE_SIZE 0x10000 +#define CONFIG_SPI_FLASH_ROM_DRIVER_PATCH 1 +#define CONFIG_SPI_FLASH_DANGEROUS_WRITE_ABORTS 1 +#define CONFIG_SPI_FLASH_YIELD_DURING_ERASE 1 +#define CONFIG_SPI_FLASH_ERASE_YIELD_DURATION_MS 20 +#define CONFIG_SPI_FLASH_ERASE_YIELD_TICKS 1 +#define CONFIG_SPI_FLASH_WRITE_CHUNK_SIZE 8192 +#define CONFIG_SPI_FLASH_BROWNOUT_RESET_XMC 1 +#define CONFIG_SPI_FLASH_BROWNOUT_RESET 1 +#define CONFIG_SPI_FLASH_VENDOR_XMC_SUPPORTED 1 +#define CONFIG_SPI_FLASH_VENDOR_GD_SUPPORTED 1 +#define CONFIG_SPI_FLASH_VENDOR_ISSI_SUPPORTED 1 +#define CONFIG_SPI_FLASH_VENDOR_MXIC_SUPPORTED 1 +#define CONFIG_SPI_FLASH_VENDOR_WINBOND_SUPPORTED 1 +#define CONFIG_SPI_FLASH_VENDOR_BOYA_SUPPORTED 1 +#define CONFIG_SPI_FLASH_VENDOR_TH_SUPPORTED 1 +#define CONFIG_SPI_FLASH_SUPPORT_ISSI_CHIP 1 +#define CONFIG_SPI_FLASH_SUPPORT_MXIC_CHIP 1 +#define CONFIG_SPI_FLASH_SUPPORT_GD_CHIP 1 +#define CONFIG_SPI_FLASH_SUPPORT_WINBOND_CHIP 1 +#define CONFIG_SPI_FLASH_SUPPORT_BOYA_CHIP 1 +#define CONFIG_SPI_FLASH_SUPPORT_TH_CHIP 1 +#define CONFIG_SPI_FLASH_ENABLE_ENCRYPTED_READ_WRITE 1 +#define CONFIG_SPIFFS_MAX_PARTITIONS 3 +#define CONFIG_SPIFFS_CACHE 1 +#define CONFIG_SPIFFS_CACHE_WR 1 +#define CONFIG_SPIFFS_PAGE_CHECK 1 +#define CONFIG_SPIFFS_GC_MAX_RUNS 10 +#define CONFIG_SPIFFS_PAGE_SIZE 256 +#define CONFIG_SPIFFS_OBJ_NAME_LEN 32 +#define CONFIG_SPIFFS_USE_MAGIC 1 +#define CONFIG_SPIFFS_USE_MAGIC_LENGTH 1 +#define CONFIG_SPIFFS_META_LENGTH 4 +#define CONFIG_SPIFFS_USE_MTIME 1 +#define CONFIG_WS_TRANSPORT 1 +#define CONFIG_WS_BUFFER_SIZE 1024 +#define CONFIG_UNITY_ENABLE_FLOAT 1 +#define CONFIG_UNITY_ENABLE_DOUBLE 1 +#define CONFIG_UNITY_ENABLE_IDF_TEST_RUNNER 1 +#define CONFIG_USB_OTG_SUPPORTED 1 +#define CONFIG_USB_HOST_CONTROL_TRANSFER_MAX_SIZE 256 +#define CONFIG_USB_HOST_HW_BUFFER_BIAS_BALANCED 1 +#define CONFIG_USB_HOST_DEBOUNCE_DELAY_MS 250 +#define CONFIG_USB_HOST_RESET_HOLD_MS 30 +#define CONFIG_USB_HOST_RESET_RECOVERY_MS 30 +#define CONFIG_USB_HOST_SET_ADDR_RECOVERY_MS 10 +#define CONFIG_VFS_SUPPORT_IO 1 +#define CONFIG_VFS_SUPPORT_DIR 1 +#define CONFIG_VFS_SUPPORT_SELECT 1 +#define CONFIG_VFS_SUPPRESS_SELECT_DEBUG_OUTPUT 1 +#define CONFIG_VFS_SUPPORT_TERMIOS 1 +#define CONFIG_VFS_MAX_COUNT 8 +#define CONFIG_VFS_SEMIHOSTFS_MAX_MOUNT_POINTS 1 +#define CONFIG_WL_SECTOR_SIZE_4096 1 +#define CONFIG_WL_SECTOR_SIZE 4096 +#define CONFIG_WIFI_PROV_SCAN_MAX_ENTRIES 16 +#define CONFIG_WIFI_PROV_AUTOSTOP_TIMEOUT 30 +#define CONFIG_WIFI_PROV_STA_ALL_CHANNEL_SCAN 1 + +/* List of deprecated options */ +#define CONFIG_ADC2_DISABLE_DAC CONFIG_ADC_DISABLE_DAC +#define CONFIG_BROWNOUT_DET CONFIG_ESP_BROWNOUT_DET +#define CONFIG_BROWNOUT_DET_LVL CONFIG_ESP_BROWNOUT_DET_LVL +#define CONFIG_BROWNOUT_DET_LVL_SEL_7 CONFIG_ESP_BROWNOUT_DET_LVL_SEL_7 +#define CONFIG_COMPILER_OPTIMIZATION_LEVEL_RELEASE CONFIG_COMPILER_OPTIMIZATION_SIZE +#define CONFIG_CONSOLE_UART CONFIG_ESP_CONSOLE_UART +#define CONFIG_CONSOLE_UART_BAUDRATE CONFIG_ESP_CONSOLE_UART_BAUDRATE +#define CONFIG_CONSOLE_UART_DEFAULT CONFIG_ESP_CONSOLE_UART_DEFAULT +#define CONFIG_CONSOLE_UART_NUM CONFIG_ESP_CONSOLE_UART_NUM +#define CONFIG_ESP32S2_ALLOW_RTC_FAST_MEM_AS_HEAP CONFIG_ESP_SYSTEM_ALLOW_RTC_FAST_MEM_AS_HEAP +#define CONFIG_ESP32S2_BROWNOUT_DET CONFIG_ESP_BROWNOUT_DET +#define CONFIG_ESP32S2_BROWNOUT_DET_LVL CONFIG_ESP_BROWNOUT_DET_LVL +#define CONFIG_ESP32S2_BROWNOUT_DET_LVL_SEL_7 CONFIG_ESP_BROWNOUT_DET_LVL_SEL_7 +#define CONFIG_ESP32S2_DEBUG_OCDAWARE CONFIG_ESP_DEBUG_OCDAWARE +#define CONFIG_ESP32S2_DEFAULT_CPU_FREQ_160 CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ_160 +#define CONFIG_ESP32S2_MEMPROT_FEATURE CONFIG_ESP_SYSTEM_MEMPROT_FEATURE +#define CONFIG_ESP32S2_MEMPROT_FEATURE_LOCK CONFIG_ESP_SYSTEM_MEMPROT_FEATURE_LOCK +#define CONFIG_ESP32S2_PANIC_PRINT_REBOOT CONFIG_ESP_SYSTEM_PANIC_PRINT_REBOOT +#define CONFIG_ESP32S2_RTC_CLK_CAL_CYCLES CONFIG_RTC_CLK_CAL_CYCLES +#define CONFIG_ESP32S2_RTC_CLK_SRC_INT_RC CONFIG_RTC_CLK_SRC_INT_RC +#define CONFIG_ESP32S2_TIME_SYSCALL_USE_RTC_FRC1 CONFIG_NEWLIB_TIME_SYSCALL_USE_RTC_HRT +#define CONFIG_ESP32S2_TIME_SYSCALL_USE_RTC_SYSTIMER CONFIG_NEWLIB_TIME_SYSCALL_USE_RTC_HRT +#define CONFIG_ESP32_APPTRACE_DEST_NONE CONFIG_APPTRACE_DEST_NONE +#define CONFIG_ESP32_APPTRACE_LOCK_ENABLE CONFIG_APPTRACE_LOCK_ENABLE +#define CONFIG_ESP32_ENABLE_COREDUMP_TO_NONE CONFIG_ESP_COREDUMP_ENABLE_TO_NONE +#define CONFIG_ESP32_PHY_CALIBRATION_AND_DATA_STORAGE CONFIG_ESP_PHY_CALIBRATION_AND_DATA_STORAGE +#define CONFIG_ESP32_PHY_MAX_TX_POWER CONFIG_ESP_PHY_MAX_TX_POWER +#define CONFIG_ESP32_PHY_MAX_WIFI_TX_POWER CONFIG_ESP_PHY_MAX_WIFI_TX_POWER +#define CONFIG_ESP32_PTHREAD_TASK_CORE_DEFAULT CONFIG_PTHREAD_TASK_CORE_DEFAULT +#define CONFIG_ESP32_PTHREAD_TASK_NAME_DEFAULT CONFIG_PTHREAD_TASK_NAME_DEFAULT +#define CONFIG_ESP32_PTHREAD_TASK_PRIO_DEFAULT CONFIG_PTHREAD_TASK_PRIO_DEFAULT +#define CONFIG_ESP32_PTHREAD_TASK_STACK_SIZE_DEFAULT CONFIG_PTHREAD_TASK_STACK_SIZE_DEFAULT +#define CONFIG_ESP32_WIFI_AMPDU_RX_ENABLED CONFIG_ESP_WIFI_AMPDU_RX_ENABLED +#define CONFIG_ESP32_WIFI_AMPDU_TX_ENABLED CONFIG_ESP_WIFI_AMPDU_TX_ENABLED +#define CONFIG_ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM CONFIG_ESP_WIFI_DYNAMIC_RX_BUFFER_NUM +#define CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER CONFIG_ESP_WIFI_DYNAMIC_TX_BUFFER +#define CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER_NUM CONFIG_ESP_WIFI_DYNAMIC_TX_BUFFER_NUM +#define CONFIG_ESP32_WIFI_ENABLED CONFIG_ESP_WIFI_ENABLED +#define CONFIG_ESP32_WIFI_ENABLE_WPA3_SAE CONFIG_ESP_WIFI_ENABLE_WPA3_SAE +#define CONFIG_ESP32_WIFI_IRAM_OPT CONFIG_ESP_WIFI_IRAM_OPT +#define CONFIG_ESP32_WIFI_MGMT_SBUF_NUM CONFIG_ESP_WIFI_MGMT_SBUF_NUM +#define CONFIG_ESP32_WIFI_NVS_ENABLED CONFIG_ESP_WIFI_NVS_ENABLED +#define CONFIG_ESP32_WIFI_RX_BA_WIN CONFIG_ESP_WIFI_RX_BA_WIN +#define CONFIG_ESP32_WIFI_RX_IRAM_OPT CONFIG_ESP_WIFI_RX_IRAM_OPT +#define CONFIG_ESP32_WIFI_SOFTAP_BEACON_MAX_LEN CONFIG_ESP_WIFI_SOFTAP_BEACON_MAX_LEN +#define CONFIG_ESP32_WIFI_STATIC_RX_BUFFER_NUM CONFIG_ESP_WIFI_STATIC_RX_BUFFER_NUM +#define CONFIG_ESP32_WIFI_TX_BA_WIN CONFIG_ESP_WIFI_TX_BA_WIN +#define CONFIG_ESP32_WIFI_TX_BUFFER_TYPE CONFIG_ESP_WIFI_TX_BUFFER_TYPE +#define CONFIG_ESP_GRATUITOUS_ARP CONFIG_LWIP_ESP_GRATUITOUS_ARP +#define CONFIG_ESP_TASK_WDT CONFIG_ESP_TASK_WDT_INIT +#define CONFIG_FLASHMODE_DIO CONFIG_ESPTOOLPY_FLASHMODE_DIO +#define CONFIG_GARP_TMR_INTERVAL CONFIG_LWIP_GARP_TMR_INTERVAL +#define CONFIG_INT_WDT CONFIG_ESP_INT_WDT +#define CONFIG_INT_WDT_TIMEOUT_MS CONFIG_ESP_INT_WDT_TIMEOUT_MS +#define CONFIG_IPC_TASK_STACK_SIZE CONFIG_ESP_IPC_TASK_STACK_SIZE +#define CONFIG_LOG_BOOTLOADER_LEVEL CONFIG_BOOTLOADER_LOG_LEVEL +#define CONFIG_LOG_BOOTLOADER_LEVEL_INFO CONFIG_BOOTLOADER_LOG_LEVEL_INFO +#define CONFIG_MAIN_TASK_STACK_SIZE CONFIG_ESP_MAIN_TASK_STACK_SIZE +#define CONFIG_MONITOR_BAUD CONFIG_ESPTOOLPY_MONITOR_BAUD +#define CONFIG_OPTIMIZATION_ASSERTIONS_ENABLED CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_ENABLE +#define CONFIG_OPTIMIZATION_ASSERTION_LEVEL CONFIG_COMPILER_OPTIMIZATION_ASSERTION_LEVEL +#define CONFIG_OPTIMIZATION_LEVEL_RELEASE CONFIG_COMPILER_OPTIMIZATION_SIZE +#define CONFIG_POST_EVENTS_FROM_IRAM_ISR CONFIG_ESP_EVENT_POST_FROM_IRAM_ISR +#define CONFIG_POST_EVENTS_FROM_ISR CONFIG_ESP_EVENT_POST_FROM_ISR +#define CONFIG_SEMIHOSTFS_MAX_MOUNT_POINTS CONFIG_VFS_SEMIHOSTFS_MAX_MOUNT_POINTS +#define CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ABORTS CONFIG_SPI_FLASH_DANGEROUS_WRITE_ABORTS +#define CONFIG_STACK_CHECK_NONE CONFIG_COMPILER_STACK_CHECK_MODE_NONE +#define CONFIG_SUPPORT_TERMIOS CONFIG_VFS_SUPPORT_TERMIOS +#define CONFIG_SUPPRESS_SELECT_DEBUG_OUTPUT CONFIG_VFS_SUPPRESS_SELECT_DEBUG_OUTPUT +#define CONFIG_SYSTEM_EVENT_QUEUE_SIZE CONFIG_ESP_SYSTEM_EVENT_QUEUE_SIZE +#define CONFIG_SYSTEM_EVENT_TASK_STACK_SIZE CONFIG_ESP_SYSTEM_EVENT_TASK_STACK_SIZE +#define CONFIG_TASK_WDT CONFIG_ESP_TASK_WDT_INIT +#define CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU0 CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU0 +#define CONFIG_TASK_WDT_TIMEOUT_S CONFIG_ESP_TASK_WDT_TIMEOUT_S +#define CONFIG_TCPIP_RECVMBOX_SIZE CONFIG_LWIP_TCPIP_RECVMBOX_SIZE +#define CONFIG_TCPIP_TASK_AFFINITY CONFIG_LWIP_TCPIP_TASK_AFFINITY +#define CONFIG_TCPIP_TASK_AFFINITY_NO_AFFINITY CONFIG_LWIP_TCPIP_TASK_AFFINITY_NO_AFFINITY +#define CONFIG_TCPIP_TASK_STACK_SIZE CONFIG_LWIP_TCPIP_TASK_STACK_SIZE +#define CONFIG_TCP_MAXRTX CONFIG_LWIP_TCP_MAXRTX +#define CONFIG_TCP_MSL CONFIG_LWIP_TCP_MSL +#define CONFIG_TCP_MSS CONFIG_LWIP_TCP_MSS +#define CONFIG_TCP_OVERSIZE_MSS CONFIG_LWIP_TCP_OVERSIZE_MSS +#define CONFIG_TCP_QUEUE_OOSEQ CONFIG_LWIP_TCP_QUEUE_OOSEQ +#define CONFIG_TCP_RECVMBOX_SIZE CONFIG_LWIP_TCP_RECVMBOX_SIZE +#define CONFIG_TCP_SND_BUF_DEFAULT CONFIG_LWIP_TCP_SND_BUF_DEFAULT +#define CONFIG_TCP_SYNMAXRTX CONFIG_LWIP_TCP_SYNMAXRTX +#define CONFIG_TCP_WND_DEFAULT CONFIG_LWIP_TCP_WND_DEFAULT +#define CONFIG_TIMER_QUEUE_LENGTH CONFIG_FREERTOS_TIMER_QUEUE_LENGTH +#define CONFIG_TIMER_TASK_PRIORITY CONFIG_FREERTOS_TIMER_TASK_PRIORITY +#define CONFIG_TIMER_TASK_STACK_DEPTH CONFIG_FREERTOS_TIMER_TASK_STACK_DEPTH +#define CONFIG_TIMER_TASK_STACK_SIZE CONFIG_ESP_TIMER_TASK_STACK_SIZE +#define CONFIG_UDP_RECVMBOX_SIZE CONFIG_LWIP_UDP_RECVMBOX_SIZE +#define CONFIG_WPA_MBEDTLS_CRYPTO CONFIG_ESP_WIFI_MBEDTLS_CRYPTO diff --git a/espradio/blobs/headers/esp32s3/esp_bt.h b/espradio/blobs/headers/esp32s3/esp_bt.h new file mode 100644 index 000000000..7376ac839 --- /dev/null +++ b/espradio/blobs/headers/esp32s3/esp_bt.h @@ -0,0 +1,599 @@ +/* + * SPDX-FileCopyrightText: 2015-2023 Espressif Systems (Shanghai) CO LTD + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#ifndef __ESP_BT_H__ +#define __ESP_BT_H__ + +#include +#include +#include "esp_err.h" +#include "sdkconfig.h" +#include "esp_task.h" +#include "esp_assert.h" + +#ifdef __cplusplus +extern "C" { +#endif + +#define ESP_BT_CTRL_CONFIG_MAGIC_VAL 0x5A5AA5A5 +#define ESP_BT_CTRL_CONFIG_VERSION 0x02307120 + +#define ESP_BT_HCI_TL_MAGIC_VALUE 0xfadebead +#define ESP_BT_HCI_TL_VERSION 0x00010000 + +/** + * @brief Bluetooth mode for controller enable/disable + */ +typedef enum { + ESP_BT_MODE_IDLE = 0x00, /*!< Bluetooth is not running */ + ESP_BT_MODE_BLE = 0x01, /*!< Run BLE mode */ + ESP_BT_MODE_CLASSIC_BT = 0x02, /*!< Run Classic BT mode */ + ESP_BT_MODE_BTDM = 0x03, /*!< Run dual mode */ +} esp_bt_mode_t; + +/** + * @brief Type of controller HCI transport layer + */ +typedef enum { + ESP_BT_CTRL_HCI_TL_UART = 0, /*!< HCI UART h4 transport layer */ + ESP_BT_CTRL_HCI_TL_VHCI = 1, /*!< VHCI interface */ +} esp_bt_ctrl_hci_tl_t; + +/** + * @brief type of BLE connection event length computation + */ +typedef enum { + ESP_BLE_CE_LEN_TYPE_ORIG = 0, /*!< original */ + ESP_BLE_CE_LEN_TYPE_CE = 1, /*!< use CE_LEN parameter from HCI commands */ + ESP_BLE_CE_LEN_TYPE_SD = 1, /*!< Espressif vendor defined */ +} esp_ble_ce_len_t; + +/** + * @brief Bluetooth sleep mode + */ +typedef enum { + ESP_BT_SLEEP_MODE_NONE = 0, /*!< Bluetooth sleep mode disabled */ + ESP_BT_SLEEP_MODE_1 = 1, /*!< Bluetooth sleep mode 1 */ +} esp_bt_sleep_mode_t; + +/** + * @brief Bluetooth sleep clock + */ +typedef enum { + ESP_BT_SLEEP_CLOCK_NONE = 0, /*!< Sleep clock not configured */ + ESP_BT_SLEEP_CLOCK_MAIN_XTAL = 1, /*!< SoC main crystal */ + ESP_BT_SLEEP_CLOCK_EXT_32K_XTAL = 2, /*!< External 32.768kHz crystal */ + ESP_BT_SLEEP_CLOCK_RTC_SLOW = 3, /*!< Internal 136kHz RC oscillator */ + ESP_BT_SLEEP_CLOCK_FPGA_32K = 4, /*!< Hardwired 32KHz clock temporarily used for FPGA */ +} esp_bt_sleep_clock_t; + +/** + * @brief antenna index used for bluetooth + */ +enum { + ESP_BT_ANT_IDX_0 = 0, /*!< anntena NO 0 */ + ESP_BT_ANT_IDX_1 = 1, /*!< anntena NO 1 */ +}; + +/** + * @brief Maximum Tx/Rx time limit on Coded-PHY connection + */ +enum { + ESP_BT_COEX_PHY_CODED_TX_RX_TIME_LIMIT_FORCE_DISABLE = 0, /*!< Disable the limit */ + ESP_BT_COEX_PHY_CODED_TX_RX_TIME_LIMIT_FORCE_ENABLE, /*!< Always Enable the limit */ +}; + +#define ESP_BT_HCI_TL_STATUS_OK (0) /*!< HCI_TL Tx/Rx operation status OK */ + +/** + * @brief callback function for HCI Transport Layer send/receive operations + */ +typedef void (* esp_bt_hci_tl_callback_t) (void *arg, uint8_t status); + +#ifdef CONFIG_BT_ENABLED + +#define BT_CTRL_BLE_MAX_ACT_LIMIT 10 //Maximum BLE activity limitation +#define SLAVE_CE_LEN_MIN_DEFAULT 5 + +#ifdef CONFIG_BT_CTRL_SCAN_DUPL_TYPE +#define SCAN_DUPLICATE_TYPE_VALUE CONFIG_BT_CTRL_SCAN_DUPL_TYPE +#else +#define SCAN_DUPLICATE_TYPE_VALUE 0 +#endif + +/* normal adv cache size */ +#ifdef CONFIG_BT_CTRL_SCAN_DUPL_CACHE_SIZE +#define NORMAL_SCAN_DUPLICATE_CACHE_SIZE CONFIG_BT_CTRL_SCAN_DUPL_CACHE_SIZE +#else +#define NORMAL_SCAN_DUPLICATE_CACHE_SIZE 20 +#endif + +#ifndef CONFIG_BT_CTRL_BLE_MESH_SCAN_DUPL_EN +#define CONFIG_BT_CTRL_BLE_MESH_SCAN_DUPL_EN FALSE +#endif + +#define SCAN_DUPLICATE_MODE_NORMAL_ADV_ONLY 0 +#define SCAN_DUPLICATE_MODE_NORMAL_ADV_MESH_ADV 1 + +#if CONFIG_BT_CTRL_BLE_MESH_SCAN_DUPL_EN + #define SCAN_DUPLICATE_MODE SCAN_DUPLICATE_MODE_NORMAL_ADV_MESH_ADV + #ifdef CONFIG_BT_CTRL_MESH_DUPL_SCAN_CACHE_SIZE + #define MESH_DUPLICATE_SCAN_CACHE_SIZE CONFIG_BT_CTRL_MESH_DUPL_SCAN_CACHE_SIZE + #else + #define MESH_DUPLICATE_SCAN_CACHE_SIZE 50 + #endif +#else + #define SCAN_DUPLICATE_MODE SCAN_DUPLICATE_MODE_NORMAL_ADV_ONLY + #define MESH_DUPLICATE_SCAN_CACHE_SIZE 0 +#endif + +#ifndef CONFIG_BT_CTRL_DUPL_SCAN_CACHE_REFRESH_PERIOD +#define DUPL_SCAN_CACHE_REFRESH_PERIOD 0 +#else +#define DUPL_SCAN_CACHE_REFRESH_PERIOD CONFIG_BT_CTRL_DUPL_SCAN_CACHE_REFRESH_PERIOD +#endif + +#ifdef CONFIG_BT_CTRL_SCAN_BACKOFF_UPPERLIMITMAX +#define BT_CTRL_SCAN_BACKOFF_UPPERLIMITMAX CONFIG_BT_CTRL_SCAN_BACKOFF_UPPERLIMITMAX +#else +#define BT_CTRL_SCAN_BACKOFF_UPPERLIMITMAX 0 +#endif + +#ifdef CONFIG_BT_CTRL_AGC_RECORRECT_EN +#define BT_CTRL_AGC_RECORRECT_EN CONFIG_BT_CTRL_AGC_RECORRECT_EN +// ESP32-S3 +#if CONFIG_IDF_TARGET_ESP32S3 +#define BT_CTRL_AGC_RECORRECT_NEW 1 +#else +//Check if chip target is ESP32-C3 101 +#if CONFIG_ESP32C3_REV_MIN_101 +#define BT_CTRL_AGC_RECORRECT_NEW 1 +#else +#define BT_CTRL_AGC_RECORRECT_NEW 0 +#endif // CONFIG_ESP32C3_REV_MIN_101 +#endif // CONFIG_IDF_TARGET_ESP32S3 + +#else +#define BT_CTRL_AGC_RECORRECT_EN 0 +#define BT_CTRL_AGC_RECORRECT_NEW 0 +#endif + +#ifdef CONFIG_BT_CTRL_CODED_AGC_RECORRECT_EN +#define BT_CTRL_CODED_AGC_RECORRECT CONFIG_BT_CTRL_CODED_AGC_RECORRECT_EN +#else +#define BT_CTRL_CODED_AGC_RECORRECT 0 +#endif + +#if defined (CONFIG_BT_BLE_50_FEATURES_SUPPORTED) || defined (CONFIG_BT_NIMBLE_50_FEATURE_SUPPORT) +#ifdef CONFIG_BT_BLE_50_FEATURES_SUPPORTED +#define BT_CTRL_50_FEATURE_SUPPORT (CONFIG_BT_BLE_50_FEATURES_SUPPORTED) +#endif // CONFIG_BT_BLE_50_FEATURES_SUPPORTED +#ifdef CONFIG_BT_NIMBLE_50_FEATURE_SUPPORT +#define BT_CTRL_50_FEATURE_SUPPORT (CONFIG_BT_NIMBLE_50_FEATURE_SUPPORT) +#endif // CONFIG_BT_NIMBLE_50_FEATURE_SUPPORT +#else +#if defined (CONFIG_BT_BLUEDROID_ENABLED) || defined (CONFIG_BT_NIMBLE_ENABLED) +#define BT_CTRL_50_FEATURE_SUPPORT (0) +#else +#define BT_CTRL_50_FEATURE_SUPPORT (1) +#endif // (CONFIG_BT_BLUEDROID_ENABLED) || (CONFIG_BT_NIMBLE_ENABLED) +#endif // (CONFIG_BT_BLE_50_FEATURES_SUPPORTED) || (CONFIG_BT_NIMBLE_50_FEATURE_SUPPORT) + +#if defined(CONFIG_BT_BLE_CCA_MODE) +#define BT_BLE_CCA_MODE (CONFIG_BT_BLE_CCA_MODE) +#else +#define BT_BLE_CCA_MODE (0) +#endif + +#define AGC_RECORRECT_EN ((BT_CTRL_AGC_RECORRECT_EN << 0) | (BT_CTRL_CODED_AGC_RECORRECT <<1) | (BT_CTRL_AGC_RECORRECT_NEW << 2)) + +#define CFG_MASK_BIT_SCAN_DUPLICATE_OPTION (1<<0) + +#define CFG_MASK CFG_MASK_BIT_SCAN_DUPLICATE_OPTION +#if CONFIG_IDF_TARGET_ESP32C3 +#define BLE_HW_TARGET_CODE_CHIP_ECO0 (0x01010000) +#else // CONFIG_IDF_TARGET_ESP32S3 +#define BLE_HW_TARGET_CODE_CHIP_ECO0 (0x02010000) +#endif + +#define BT_CONTROLLER_INIT_CONFIG_DEFAULT() { \ + .magic = ESP_BT_CTRL_CONFIG_MAGIC_VAL, \ + .version = ESP_BT_CTRL_CONFIG_VERSION, \ + .controller_task_stack_size = ESP_TASK_BT_CONTROLLER_STACK, \ + .controller_task_prio = ESP_TASK_BT_CONTROLLER_PRIO, \ + .controller_task_run_cpu = CONFIG_BT_CTRL_PINNED_TO_CORE, \ + .bluetooth_mode = CONFIG_BT_CTRL_MODE_EFF, \ + .ble_max_act = CONFIG_BT_CTRL_BLE_MAX_ACT_EFF, \ + .sleep_mode = CONFIG_BT_CTRL_SLEEP_MODE_EFF, \ + .sleep_clock = CONFIG_BT_CTRL_SLEEP_CLOCK_EFF, \ + .ble_st_acl_tx_buf_nb = CONFIG_BT_CTRL_BLE_STATIC_ACL_TX_BUF_NB, \ + .ble_hw_cca_check = CONFIG_BT_CTRL_HW_CCA_EFF, \ + .ble_adv_dup_filt_max = CONFIG_BT_CTRL_ADV_DUP_FILT_MAX, \ + .coex_param_en = false, \ + .ce_len_type = CONFIG_BT_CTRL_CE_LENGTH_TYPE_EFF, \ + .coex_use_hooks = false, \ + .hci_tl_type = CONFIG_BT_CTRL_HCI_TL_EFF, \ + .hci_tl_funcs = NULL, \ + .txant_dft = CONFIG_BT_CTRL_TX_ANTENNA_INDEX_EFF, \ + .rxant_dft = CONFIG_BT_CTRL_RX_ANTENNA_INDEX_EFF, \ + .txpwr_dft = CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_EFF, \ + .cfg_mask = CFG_MASK, \ + .scan_duplicate_mode = SCAN_DUPLICATE_MODE, \ + .scan_duplicate_type = SCAN_DUPLICATE_TYPE_VALUE, \ + .normal_adv_size = NORMAL_SCAN_DUPLICATE_CACHE_SIZE, \ + .mesh_adv_size = MESH_DUPLICATE_SCAN_CACHE_SIZE, \ + .coex_phy_coded_tx_rx_time_limit = CONFIG_BT_CTRL_COEX_PHY_CODED_TX_RX_TLIM_EFF, \ + .hw_target_code = BLE_HW_TARGET_CODE_CHIP_ECO0, \ + .slave_ce_len_min = SLAVE_CE_LEN_MIN_DEFAULT, \ + .hw_recorrect_en = AGC_RECORRECT_EN, \ + .cca_thresh = CONFIG_BT_CTRL_HW_CCA_VAL, \ + .scan_backoff_upperlimitmax = BT_CTRL_SCAN_BACKOFF_UPPERLIMITMAX, \ + .dup_list_refresh_period = DUPL_SCAN_CACHE_REFRESH_PERIOD, \ + .ble_50_feat_supp = BT_CTRL_50_FEATURE_SUPPORT, \ + .ble_cca_mode = BT_BLE_CCA_MODE, \ +} + +#else +#define BT_CONTROLLER_INIT_CONFIG_DEFAULT() {0}; ESP_STATIC_ASSERT(0, "please enable bluetooth in menuconfig to use esp_bt.h"); +#endif + +/** + * @brief Controller HCI transport layer function structure + * This structure shall be registered when HCI transport layer is UART + */ +typedef struct { + uint32_t _magic; /*!< Magic number */ + uint32_t _version; /*!< Version number of the defined structure */ + uint32_t _reserved; /*!< Reserved for future use */ + int (* _open)(void); /*!< HCI transport layer open function */ + void (* _close)(void); /*!< HCI transport layer close function */ + void (* _finish_transfers)(void); /*!< HCI transport layer finish transfers function */ + void (* _recv)(uint8_t *buf, uint32_t len, esp_bt_hci_tl_callback_t callback, void* arg); /*!< HCI transport layer receive function */ + void (* _send)(uint8_t *buf, uint32_t len, esp_bt_hci_tl_callback_t callback, void* arg); /*!< HCI transport layer send function */ + bool (* _flow_off)(void); /*!< HCI transport layer flow off function */ + void (* _flow_on)(void); /*!< HCI transport layer flow on function */ +} esp_bt_hci_tl_t; + +/** + * @brief Controller config options, depend on config mask. + * Config mask indicate which functions enabled, this means + * some options or parameters of some functions enabled by config mask. + */ +typedef struct { + /* + * Following parameters can not be configured runtime when call esp_bt_controller_init() + * They will be overwritten by constant values from menuconfig options or from macros. + * So, do not modify the value when esp_bt_controller_init() + */ + uint32_t magic; /*!< Magic number */ + uint32_t version; /*!< version number of the defined structure */ + /* + * Following parameters can be configured runtime, when call esp_bt_controller_init() + */ + uint16_t controller_task_stack_size; /*!< Bluetooth controller task stack size */ + uint8_t controller_task_prio; /*!< Bluetooth controller task priority */ + uint8_t controller_task_run_cpu; /*!< CPU num that Bluetooth controller task runs on */ + uint8_t bluetooth_mode; /*!< Controller mode: BR/EDR, BLE or Dual Mode */ + uint8_t ble_max_act; /*!< BLE maximum number of air activities */ + uint8_t sleep_mode; /*!< controller sleep mode */ + uint8_t sleep_clock; /*!< controller sleep clock */ + uint8_t ble_st_acl_tx_buf_nb; /*!< controller static ACL TX BUFFER number */ + uint8_t ble_hw_cca_check; /*!< controller hardware triggered CCA check */ + uint16_t ble_adv_dup_filt_max; /*!< maxinum number of duplicate scan filter */ + bool coex_param_en; /*!< deprecated */ + uint8_t ce_len_type; /*!< connection event length computation method */ + bool coex_use_hooks; /*!< deprecated */ + uint8_t hci_tl_type; /*!< HCI transport layer, UART, VHCI, etc */ + esp_bt_hci_tl_t *hci_tl_funcs; /*!< hci transport functions used, must be set when hci_tl_type is UART */ + uint8_t txant_dft; /*!< default Tx antenna */ + uint8_t rxant_dft; /*!< default Rx antenna */ + uint8_t txpwr_dft; /*!< default Tx power */ + uint32_t cfg_mask; /*!< Configuration mask to set specific options */ + uint8_t scan_duplicate_mode; /*!< scan duplicate mode */ + uint8_t scan_duplicate_type; /*!< scan duplicate type */ + uint16_t normal_adv_size; /*!< Normal adv size for scan duplicate */ + uint16_t mesh_adv_size; /*!< Mesh adv size for scan duplicate */ + uint8_t coex_phy_coded_tx_rx_time_limit; /*!< limit on max tx/rx time in case of connection using CODED-PHY with Wi-Fi coexistence */ + uint32_t hw_target_code; /*!< hardware target */ + uint8_t slave_ce_len_min; /*!< slave minimum ce length*/ + uint8_t hw_recorrect_en; /*!< Hardware re-correction enabled */ + uint8_t cca_thresh; /*!< cca threshold*/ + uint16_t scan_backoff_upperlimitmax; /*!< scan backoff upperlimitmax value */ + uint16_t dup_list_refresh_period; /*!< duplicate scan list refresh time */ + bool ble_50_feat_supp; /*!< BLE 5.0 feature support */ + uint8_t ble_cca_mode; /*!< BLE CCA mode */ +} esp_bt_controller_config_t; + +/** + * @brief Bluetooth controller enable/disable/initialised/de-initialised status + */ +typedef enum { + ESP_BT_CONTROLLER_STATUS_IDLE = 0, + ESP_BT_CONTROLLER_STATUS_INITED, + ESP_BT_CONTROLLER_STATUS_ENABLED, + ESP_BT_CONTROLLER_STATUS_NUM, +} esp_bt_controller_status_t; + +/** + * @brief BLE tx power type + * ESP_BLE_PWR_TYPE_CONN_HDL0-8: for each connection, and only be set after connection completed. + * when disconnect, the correspond TX power is not effected. + * ESP_BLE_PWR_TYPE_ADV : for advertising/scan response. + * ESP_BLE_PWR_TYPE_SCAN : for scan. + * ESP_BLE_PWR_TYPE_DEFAULT : if each connection's TX power is not set, it will use this default value. + * if neither in scan mode nor in adv mode, it will use this default value. + * If none of power type is set, system will use ESP_PWR_LVL_P3 as default for ADV/SCAN/CONN0-9. + */ +typedef enum { + ESP_BLE_PWR_TYPE_CONN_HDL0 = 0, /*!< For connection handle 0 */ + ESP_BLE_PWR_TYPE_CONN_HDL1 = 1, /*!< For connection handle 1 */ + ESP_BLE_PWR_TYPE_CONN_HDL2 = 2, /*!< For connection handle 2 */ + ESP_BLE_PWR_TYPE_CONN_HDL3 = 3, /*!< For connection handle 3 */ + ESP_BLE_PWR_TYPE_CONN_HDL4 = 4, /*!< For connection handle 4 */ + ESP_BLE_PWR_TYPE_CONN_HDL5 = 5, /*!< For connection handle 5 */ + ESP_BLE_PWR_TYPE_CONN_HDL6 = 6, /*!< For connection handle 6 */ + ESP_BLE_PWR_TYPE_CONN_HDL7 = 7, /*!< For connection handle 7 */ + ESP_BLE_PWR_TYPE_CONN_HDL8 = 8, /*!< For connection handle 8 */ + ESP_BLE_PWR_TYPE_ADV = 9, /*!< For advertising */ + ESP_BLE_PWR_TYPE_SCAN = 10, /*!< For scan */ + ESP_BLE_PWR_TYPE_DEFAULT = 11, /*!< For default, if not set other, it will use default value */ + ESP_BLE_PWR_TYPE_NUM = 12, /*!< TYPE numbers */ +} esp_ble_power_type_t; + +/** + * @brief Bluetooth TX power level(index), it's just a index corresponding to power(dbm). + */ +typedef enum { + ESP_PWR_LVL_N24 = 0, /*!< Corresponding to -24dbm */ + ESP_PWR_LVL_N21 = 1, /*!< Corresponding to -21dbm */ + ESP_PWR_LVL_N18 = 2, /*!< Corresponding to -18dbm */ + ESP_PWR_LVL_N15 = 3, /*!< Corresponding to -15dbm */ + ESP_PWR_LVL_N12 = 4, /*!< Corresponding to -12dbm */ + ESP_PWR_LVL_N9 = 5, /*!< Corresponding to -9dbm */ + ESP_PWR_LVL_N6 = 6, /*!< Corresponding to -6dbm */ + ESP_PWR_LVL_N3 = 7, /*!< Corresponding to -3dbm */ + ESP_PWR_LVL_N0 = 8, /*!< Corresponding to 0dbm */ + ESP_PWR_LVL_P3 = 9, /*!< Corresponding to +3dbm */ + ESP_PWR_LVL_P6 = 10, /*!< Corresponding to +6dbm */ + ESP_PWR_LVL_P9 = 11, /*!< Corresponding to +9dbm */ + ESP_PWR_LVL_P12 = 12, /*!< Corresponding to +12dbm */ + ESP_PWR_LVL_P15 = 13, /*!< Corresponding to +15dbm */ + ESP_PWR_LVL_P18 = 14, /*!< Corresponding to +18dbm */ + ESP_PWR_LVL_P21 = 15, /*!< Corresponding to +21dbm */ + ESP_PWR_LVL_INVALID = 0xFF, /*!< Indicates an invalid value */ +} esp_power_level_t; + +/** + * @brief Set BLE TX power + * Connection Tx power should only be set after connection created. + * @param power_type : The type of which tx power, could set Advertising/Connection/Default and etc + * @param power_level: Power level(index) corresponding to absolute value(dbm) + * @return ESP_OK - success, other - failed + */ +esp_err_t esp_ble_tx_power_set(esp_ble_power_type_t power_type, esp_power_level_t power_level); + +/** + * @brief Get BLE TX power + * Connection Tx power should only be get after connection created. + * @param power_type : The type of which tx power, could set Advertising/Connection/Default and etc + * @return >= 0 - Power level, < 0 - Invalid + */ +esp_power_level_t esp_ble_tx_power_get(esp_ble_power_type_t power_type); + +/** + * @brief Initialize BT controller to allocate task and other resource. + * This function should be called only once, before any other BT functions are called. + * @param cfg: Initial configuration of BT controller. Different from previous version, there's a mode and some + * connection configuration in "cfg" to configure controller work mode and allocate the resource which is needed. + * @return ESP_OK - success, other - failed + */ +esp_err_t esp_bt_controller_init(esp_bt_controller_config_t *cfg); + +/** + * @brief De-initialize BT controller to free resource and delete task. + * You should stop advertising and scanning, as well as + * disconnect all existing connections before de-initializing BT controller. + * + * This function should be called only once, after any other BT functions are called. + * This function is not whole completed, esp_bt_controller_init cannot called after this function. + * @return ESP_OK - success, other - failed + */ +esp_err_t esp_bt_controller_deinit(void); + +/** + * @brief Enable BT controller. + * Due to a known issue, you cannot call esp_bt_controller_enable() a second time + * to change the controller mode dynamically. To change controller mode, call + * esp_bt_controller_disable() and then call esp_bt_controller_enable() with the new mode. + * @param mode : the mode(BLE/BT/BTDM) to enable. For compatible of API, retain this argument. This mode must be + * equal as the mode in "cfg" of esp_bt_controller_init(). + * @return ESP_OK - success, other - failed + */ +esp_err_t esp_bt_controller_enable(esp_bt_mode_t mode); + +/** + * @brief Disable BT controller + * @return ESP_OK - success, other - failed + */ +esp_err_t esp_bt_controller_disable(void); + +/** + * @brief Get BT controller is initialised/de-initialised/enabled/disabled + * @return status value + */ +esp_bt_controller_status_t esp_bt_controller_get_status(void); + +uint16_t esp_bt_get_tx_buf_num(void); + +/** @brief esp_vhci_host_callback + * used for vhci call host function to notify what host need to do + */ +typedef struct esp_vhci_host_callback { + void (*notify_host_send_available)(void); /*!< callback used to notify that the host can send packet to controller */ + int (*notify_host_recv)(uint8_t *data, uint16_t len); /*!< callback used to notify that the controller has a packet to send to the host*/ +} esp_vhci_host_callback_t; + +/** @brief esp_vhci_host_check_send_available + * used for check actively if the host can send packet to controller or not. + * @return true for ready to send, false means cannot send packet + */ +bool esp_vhci_host_check_send_available(void); + +/** @brief esp_vhci_host_send_packet + * host send packet to controller + * + * Should not call this function from within a critical section + * or when the scheduler is suspended. + * + * @param data the packet point + * @param len the packet length + */ +void esp_vhci_host_send_packet(uint8_t *data, uint16_t len); + +/** @brief esp_vhci_host_register_callback + * register the vhci reference callback + * struct defined by vhci_host_callback structure. + * @param callback esp_vhci_host_callback type variable + * @return ESP_OK - success, ESP_FAIL - failed + */ +esp_err_t esp_vhci_host_register_callback(const esp_vhci_host_callback_t *callback); + +/** @brief esp_bt_controller_mem_release + * release the controller memory as per the mode + * + * This function releases the BSS, data and other sections of the controller to heap. The total size is about 70k bytes. + * + * esp_bt_controller_mem_release(mode) should be called only before esp_bt_controller_init() + * or after esp_bt_controller_deinit(). + * + * Note that once BT controller memory is released, the process cannot be reversed. It means you cannot use the bluetooth + * mode which you have released by this function. + * + * If your firmware will later upgrade the Bluetooth controller mode (BLE -> BT Classic or disabled -> enabled) + * then do not call this function. + * + * If the app calls esp_bt_controller_enable(ESP_BT_MODE_BLE) to use BLE only then it is safe to call + * esp_bt_controller_mem_release(ESP_BT_MODE_CLASSIC_BT) at initialization time to free unused BT Classic memory. + * + * If the mode is ESP_BT_MODE_BTDM, then it may be useful to call API esp_bt_mem_release(ESP_BT_MODE_BTDM) instead, + * which internally calls esp_bt_controller_mem_release(ESP_BT_MODE_BTDM) and additionally releases the BSS and data + * consumed by the BT/BLE host stack to heap. For more details about usage please refer to the documentation of + * esp_bt_mem_release() function + * + * @param mode : the mode want to release memory + * @return ESP_OK - success, other - failed + */ +esp_err_t esp_bt_controller_mem_release(esp_bt_mode_t mode); + +/** @brief esp_bt_mem_release + * release controller memory and BSS and data section of the BT/BLE host stack as per the mode + * + * This function first releases controller memory by internally calling esp_bt_controller_mem_release(). + * Additionally, if the mode is set to ESP_BT_MODE_BTDM, it also releases the BSS and data consumed by the BT/BLE host stack to heap + * + * Note that once BT memory is released, the process cannot be reversed. It means you cannot use the bluetooth + * mode which you have released by this function. + * + * If your firmware will later upgrade the Bluetooth controller mode (BLE -> BT Classic or disabled -> enabled) + * then do not call this function. + * + * If you never intend to use bluetooth in a current boot-up cycle, you can call esp_bt_mem_release(ESP_BT_MODE_BTDM) + * before esp_bt_controller_init or after esp_bt_controller_deinit. + * + * For example, if a user only uses bluetooth for setting the WiFi configuration, and does not use bluetooth in the rest of the product operation". + * In such cases, after receiving the WiFi configuration, you can disable/deinit bluetooth and release its memory. + * Below is the sequence of APIs to be called for such scenarios: + * + * esp_bluedroid_disable(); + * esp_bluedroid_deinit(); + * esp_bt_controller_disable(); + * esp_bt_controller_deinit(); + * esp_bt_mem_release(ESP_BT_MODE_BTDM); + * + * @param mode : the mode whose memory is to be released + * @return ESP_OK - success, other - failed + */ +esp_err_t esp_bt_mem_release(esp_bt_mode_t mode); + +/** + * @brief enable bluetooth to enter modem sleep + * + * Note that this function shall not be invoked before esp_bt_controller_enable() + * + * There are currently two options for bluetooth modem sleep, one is ORIG mode, and another is EVED Mode. EVED Mode is intended for BLE only. + * + * For ORIG mode: + * Bluetooth modem sleep is enabled in controller start up by default if CONFIG_BTDM_CONTROLLER_MODEM_SLEEP is set and "ORIG mode" is selected. In ORIG modem sleep mode, bluetooth controller will switch off some components and pause to work every now and then, if there is no event to process; and wakeup according to the scheduled interval and resume the work. It can also wakeup earlier upon external request using function "esp_bt_controller_wakeup_request". + * + * @return + * - ESP_OK : success + * - other : failed + */ +esp_err_t esp_bt_sleep_enable(void); + + +/** + * @brief disable bluetooth modem sleep + * + * Note that this function shall not be invoked before esp_bt_controller_enable() + * + * If esp_bt_sleep_disable() is called, bluetooth controller will not be allowed to enter modem sleep; + * + * If ORIG modem sleep mode is in use, if this function is called, bluetooth controller may not immediately wake up if it is dormant then. + * In this case, esp_bt_controller_wakeup_request() can be used to shorten the time for wakeup. + * + * @return + * - ESP_OK : success + * - other : failed + */ +esp_err_t esp_bt_sleep_disable(void); + +/** + * @brief to check whether bluetooth controller is sleeping at the instant, if modem sleep is enabled + * + * Note that this function shall not be invoked before esp_bt_controller_enable() + * This function is supposed to be used ORIG mode of modem sleep + * + * @return true if in modem sleep state, false otherwise + */ +bool esp_bt_controller_is_sleeping(void); + +/** + * @brief request controller to wakeup from sleeping state during sleep mode + * + * Note that this function shall not be invoked before esp_bt_controller_enable() + * Note that this function is supposed to be used ORIG mode of modem sleep + * Note that after this request, bluetooth controller may again enter sleep as long as the modem sleep is enabled + * + * Profiling shows that it takes several milliseconds to wakeup from modem sleep after this request. + * Generally it takes longer if 32kHz XTAL is used than the main XTAL, due to the lower frequency of the former as the bluetooth low power clock source. + */ +void esp_bt_controller_wakeup_request(void); + +/** + * @brief notify bluetooth controller task to process the event upon Tx or Rx done + * + * Note that this function shall not be invoked before esp_bt_controller_enable() + * This function can be called in both ISR and non-ISR context + * + */ +int esp_bt_h4tl_eif_io_event_notify(int event); + +/** + * @brief bt Wi-Fi power domain power on + */ +void esp_wifi_bt_power_domain_on(void); + +/** + * @brief bt Wi-Fi power domain power off + */ +void esp_wifi_bt_power_domain_off(void); + +#ifdef __cplusplus +} +#endif + +#endif /* __ESP_BT_H__ */ diff --git a/espradio/blobs/headers/esp32s3/phy_init_data.h b/espradio/blobs/headers/esp32s3/phy_init_data.h new file mode 100644 index 000000000..4f2b66945 --- /dev/null +++ b/espradio/blobs/headers/esp32s3/phy_init_data.h @@ -0,0 +1,182 @@ +/* + * SPDX-FileCopyrightText: 2016-2021 Espressif Systems (Shanghai) CO LTD + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#ifndef PHY_INIT_DATA_H +#define PHY_INIT_DATA_H /* don't use #pragma once here, we compile this file sometimes */ +#include "esp_phy_init.h" +#include "sdkconfig.h" + +#ifdef __cplusplus +extern "C" { +#endif + +// constrain a value between 'low' and 'high', inclusive +#define LIMIT(val, low, high) ((val < low) ? low : (val > high) ? high : val) + +#define PHY_INIT_MAGIC "PHYINIT" + +// define the lowest tx power as LOWEST_PHY_TX_POWER +#define PHY_TX_POWER_LOWEST LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 52) +#define PHY_TX_POWER_OFFSET 2 +#define PHY_TX_POWER_NUM 14 + +#if CONFIG_ESP_PHY_MULTIPLE_INIT_DATA_BIN +#define PHY_CRC_ALGORITHM 1 +#define PHY_COUNTRY_CODE_LEN 2 +#define PHY_INIT_DATA_TYPE_OFFSET 126 +#define PHY_SUPPORT_MULTIPLE_BIN_OFFSET 125 +#endif + +static const char phy_init_magic_pre[] = PHY_INIT_MAGIC; + +/** + * @brief Structure containing default recommended PHY initialization parameters. + */ +static const esp_phy_init_data_t phy_init_data= { { + 0x00, + 0x00, + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x50), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x50), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x50), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x4c), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x4c), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x48), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x4c), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x48), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x48), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x44), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x4a), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x46), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x46), + LIMIT(CONFIG_ESP_PHY_MAX_TX_POWER * 4, 0, 0x42), + 0x00, + 0x00, + 0x00, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0xff, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0, + 0x74 +} }; + +static const char phy_init_magic_post[] = PHY_INIT_MAGIC; + +#if CONFIG_ESP_PHY_MULTIPLE_INIT_DATA_BIN +/** + * @brief PHY init data control infomation structure + */ +typedef struct { + uint8_t control_info_checksum[4]; /*!< 4-byte control infomation checksum */ + uint8_t multiple_bin_checksum[4]; /*!< 4-byte multiple bin checksum */ + uint8_t check_algorithm; /*!< check algorithm */ + uint8_t version; /*!< PHY init data bin version */ + uint8_t number; /*!< PHY init data bin number */ + uint8_t length[2]; /*!< Length of each PHY init data bin */ + uint8_t reserved[19]; /*!< 19-byte reserved */ +} __attribute__ ((packed)) phy_control_info_data_t; + +/** + * @brief Country corresponds to PHY init data type structure + */ +typedef struct { + char cc[PHY_COUNTRY_CODE_LEN]; + uint8_t type; +} phy_country_to_bin_type_t; +#endif + +#ifdef __cplusplus +} +#endif + +#endif /* PHY_INIT_DATA_H */ diff --git a/espradio/blobs/headers/esp32s3/sdkconfig.h b/espradio/blobs/headers/esp32s3/sdkconfig.h new file mode 100644 index 000000000..834a8dacd --- /dev/null +++ b/espradio/blobs/headers/esp32s3/sdkconfig.h @@ -0,0 +1,1042 @@ +/* + * Automatically generated file. DO NOT EDIT. + * Espressif IoT Development Framework (ESP-IDF) 5.1.2 Configuration Header + */ +#pragma once +#define CONFIG_SOC_MPU_MIN_REGION_SIZE 0x20000000 +#define CONFIG_SOC_MPU_REGIONS_MAX_NUM 8 +#define CONFIG_SOC_ADC_SUPPORTED 1 +#define CONFIG_SOC_UART_SUPPORTED 1 +#define CONFIG_SOC_PCNT_SUPPORTED 1 +#define CONFIG_SOC_WIFI_SUPPORTED 1 +#define CONFIG_SOC_TWAI_SUPPORTED 1 +#define CONFIG_SOC_GDMA_SUPPORTED 1 +#define CONFIG_SOC_GPTIMER_SUPPORTED 1 +#define CONFIG_SOC_LCDCAM_SUPPORTED 1 +#define CONFIG_SOC_MCPWM_SUPPORTED 1 +#define CONFIG_SOC_DEDICATED_GPIO_SUPPORTED 1 +#define CONFIG_SOC_CACHE_SUPPORT_WRAP 1 +#define CONFIG_SOC_ULP_SUPPORTED 1 +#define CONFIG_SOC_ULP_FSM_SUPPORTED 1 +#define CONFIG_SOC_RISCV_COPROC_SUPPORTED 1 +#define CONFIG_SOC_BT_SUPPORTED 1 +#define CONFIG_SOC_USB_OTG_SUPPORTED 1 +#define CONFIG_SOC_USB_SERIAL_JTAG_SUPPORTED 1 +#define CONFIG_SOC_CCOMP_TIMER_SUPPORTED 1 +#define CONFIG_SOC_ASYNC_MEMCPY_SUPPORTED 1 +#define CONFIG_SOC_SUPPORTS_SECURE_DL_MODE 1 +#define CONFIG_SOC_EFUSE_KEY_PURPOSE_FIELD 1 +#define CONFIG_SOC_SDMMC_HOST_SUPPORTED 1 +#define CONFIG_SOC_RTC_FAST_MEM_SUPPORTED 1 +#define CONFIG_SOC_RTC_SLOW_MEM_SUPPORTED 1 +#define CONFIG_SOC_RTC_MEM_SUPPORTED 1 +#define CONFIG_SOC_PSRAM_DMA_CAPABLE 1 +#define CONFIG_SOC_XT_WDT_SUPPORTED 1 +#define CONFIG_SOC_I2S_SUPPORTED 1 +#define CONFIG_SOC_RMT_SUPPORTED 1 +#define CONFIG_SOC_SDM_SUPPORTED 1 +#define CONFIG_SOC_GPSPI_SUPPORTED 1 +#define CONFIG_SOC_LEDC_SUPPORTED 1 +#define CONFIG_SOC_I2C_SUPPORTED 1 +#define CONFIG_SOC_SYSTIMER_SUPPORTED 1 +#define CONFIG_SOC_SUPPORT_COEXISTENCE 1 +#define CONFIG_SOC_TEMP_SENSOR_SUPPORTED 1 +#define CONFIG_SOC_AES_SUPPORTED 1 +#define CONFIG_SOC_MPI_SUPPORTED 1 +#define CONFIG_SOC_SHA_SUPPORTED 1 +#define CONFIG_SOC_HMAC_SUPPORTED 1 +#define CONFIG_SOC_DIG_SIGN_SUPPORTED 1 +#define CONFIG_SOC_FLASH_ENC_SUPPORTED 1 +#define CONFIG_SOC_SECURE_BOOT_SUPPORTED 1 +#define CONFIG_SOC_MEMPROT_SUPPORTED 1 +#define CONFIG_SOC_TOUCH_SENSOR_SUPPORTED 1 +#define CONFIG_SOC_BOD_SUPPORTED 1 +#define CONFIG_SOC_XTAL_SUPPORT_40M 1 +#define CONFIG_SOC_APPCPU_HAS_CLOCK_GATING_BUG 1 +#define CONFIG_SOC_ADC_RTC_CTRL_SUPPORTED 1 +#define CONFIG_SOC_ADC_DIG_CTRL_SUPPORTED 1 +#define CONFIG_SOC_ADC_ARBITER_SUPPORTED 1 +#define CONFIG_SOC_ADC_DIG_IIR_FILTER_SUPPORTED 1 +#define CONFIG_SOC_ADC_MONITOR_SUPPORTED 1 +#define CONFIG_SOC_ADC_DMA_SUPPORTED 1 +#define CONFIG_SOC_ADC_PERIPH_NUM 2 +#define CONFIG_SOC_ADC_MAX_CHANNEL_NUM 10 +#define CONFIG_SOC_ADC_ATTEN_NUM 4 +#define CONFIG_SOC_ADC_DIGI_CONTROLLER_NUM 2 +#define CONFIG_SOC_ADC_PATT_LEN_MAX 24 +#define CONFIG_SOC_ADC_DIGI_MIN_BITWIDTH 12 +#define CONFIG_SOC_ADC_DIGI_MAX_BITWIDTH 12 +#define CONFIG_SOC_ADC_DIGI_RESULT_BYTES 4 +#define CONFIG_SOC_ADC_DIGI_DATA_BYTES_PER_CONV 4 +#define CONFIG_SOC_ADC_DIGI_IIR_FILTER_NUM 2 +#define CONFIG_SOC_ADC_SAMPLE_FREQ_THRES_HIGH 83333 +#define CONFIG_SOC_ADC_SAMPLE_FREQ_THRES_LOW 611 +#define CONFIG_SOC_ADC_RTC_MIN_BITWIDTH 12 +#define CONFIG_SOC_ADC_RTC_MAX_BITWIDTH 12 +#define CONFIG_SOC_ADC_CALIBRATION_V1_SUPPORTED 1 +#define CONFIG_SOC_ADC_SELF_HW_CALI_SUPPORTED 1 +#define CONFIG_SOC_APB_BACKUP_DMA 1 +#define CONFIG_SOC_BROWNOUT_RESET_SUPPORTED 1 +#define CONFIG_SOC_CACHE_WRITEBACK_SUPPORTED 1 +#define CONFIG_SOC_CACHE_FREEZE_SUPPORTED 1 +#define CONFIG_SOC_CPU_CORES_NUM 2 +#define CONFIG_SOC_CPU_INTR_NUM 32 +#define CONFIG_SOC_CPU_HAS_FPU 1 +#define CONFIG_SOC_CPU_BREAKPOINTS_NUM 2 +#define CONFIG_SOC_CPU_WATCHPOINTS_NUM 2 +#define CONFIG_SOC_CPU_WATCHPOINT_MAX_REGION_SIZE 64 +#define CONFIG_SOC_DS_SIGNATURE_MAX_BIT_LEN 4096 +#define CONFIG_SOC_DS_KEY_PARAM_MD_IV_LENGTH 16 +#define CONFIG_SOC_DS_KEY_CHECK_MAX_WAIT_US 1100 +#define CONFIG_SOC_GDMA_GROUPS 1 +#define CONFIG_SOC_GDMA_PAIRS_PER_GROUP 5 +#define CONFIG_SOC_GDMA_SUPPORT_PSRAM 1 +#define CONFIG_SOC_GPIO_PORT 1 +#define CONFIG_SOC_GPIO_PIN_COUNT 49 +#define CONFIG_SOC_GPIO_SUPPORT_PIN_GLITCH_FILTER 1 +#define CONFIG_SOC_GPIO_FILTER_CLK_SUPPORT_APB 1 +#define CONFIG_SOC_GPIO_SUPPORT_RTC_INDEPENDENT 1 +#define CONFIG_SOC_GPIO_SUPPORT_FORCE_HOLD 1 +#define CONFIG_SOC_GPIO_VALID_GPIO_MASK 0x1FFFFFFFFFFFF +#define CONFIG_SOC_GPIO_VALID_DIGITAL_IO_PAD_MASK 0x0001FFFFFC000000 +#define CONFIG_SOC_DEDIC_GPIO_OUT_CHANNELS_NUM 8 +#define CONFIG_SOC_DEDIC_GPIO_IN_CHANNELS_NUM 8 +#define CONFIG_SOC_DEDIC_GPIO_OUT_AUTO_ENABLE 1 +#define CONFIG_SOC_I2C_NUM 2 +#define CONFIG_SOC_I2C_FIFO_LEN 32 +#define CONFIG_SOC_I2C_CMD_REG_NUM 8 +#define CONFIG_SOC_I2C_SUPPORT_SLAVE 1 +#define CONFIG_SOC_I2C_SUPPORT_HW_CLR_BUS 1 +#define CONFIG_SOC_I2C_SUPPORT_XTAL 1 +#define CONFIG_SOC_I2C_SUPPORT_RTC 1 +#define CONFIG_SOC_I2S_NUM 2 +#define CONFIG_SOC_I2S_HW_VERSION_2 1 +#define CONFIG_SOC_I2S_SUPPORTS_XTAL 1 +#define CONFIG_SOC_I2S_SUPPORTS_PLL_F160M 1 +#define CONFIG_SOC_I2S_SUPPORTS_PCM 1 +#define CONFIG_SOC_I2S_SUPPORTS_PDM 1 +#define CONFIG_SOC_I2S_SUPPORTS_PDM_TX 1 +#define CONFIG_SOC_I2S_PDM_MAX_TX_LINES 2 +#define CONFIG_SOC_I2S_SUPPORTS_PDM_RX 1 +#define CONFIG_SOC_I2S_PDM_MAX_RX_LINES 4 +#define CONFIG_SOC_I2S_SUPPORTS_TDM 1 +#define CONFIG_SOC_LEDC_SUPPORT_APB_CLOCK 1 +#define CONFIG_SOC_LEDC_SUPPORT_XTAL_CLOCK 1 +#define CONFIG_SOC_LEDC_CHANNEL_NUM 8 +#define CONFIG_SOC_LEDC_TIMER_BIT_WIDTH 14 +#define CONFIG_SOC_LEDC_SUPPORT_FADE_STOP 1 +#define CONFIG_SOC_MCPWM_GROUPS 2 +#define CONFIG_SOC_MCPWM_TIMERS_PER_GROUP 3 +#define CONFIG_SOC_MCPWM_OPERATORS_PER_GROUP 3 +#define CONFIG_SOC_MCPWM_COMPARATORS_PER_OPERATOR 2 +#define CONFIG_SOC_MCPWM_GENERATORS_PER_OPERATOR 2 +#define CONFIG_SOC_MCPWM_TRIGGERS_PER_OPERATOR 2 +#define CONFIG_SOC_MCPWM_GPIO_FAULTS_PER_GROUP 3 +#define CONFIG_SOC_MCPWM_CAPTURE_TIMERS_PER_GROUP 1 +#define CONFIG_SOC_MCPWM_CAPTURE_CHANNELS_PER_TIMER 3 +#define CONFIG_SOC_MCPWM_GPIO_SYNCHROS_PER_GROUP 3 +#define CONFIG_SOC_MCPWM_SWSYNC_CAN_PROPAGATE 1 +#define CONFIG_SOC_MMU_LINEAR_ADDRESS_REGION_NUM 1 +#define CONFIG_SOC_MMU_PERIPH_NUM 1 +#define CONFIG_SOC_PCNT_GROUPS 1 +#define CONFIG_SOC_PCNT_UNITS_PER_GROUP 4 +#define CONFIG_SOC_PCNT_CHANNELS_PER_UNIT 2 +#define CONFIG_SOC_PCNT_THRES_POINT_PER_UNIT 2 +#define CONFIG_SOC_RMT_GROUPS 1 +#define CONFIG_SOC_RMT_TX_CANDIDATES_PER_GROUP 4 +#define CONFIG_SOC_RMT_RX_CANDIDATES_PER_GROUP 4 +#define CONFIG_SOC_RMT_CHANNELS_PER_GROUP 8 +#define CONFIG_SOC_RMT_MEM_WORDS_PER_CHANNEL 48 +#define CONFIG_SOC_RMT_SUPPORT_RX_PINGPONG 1 +#define CONFIG_SOC_RMT_SUPPORT_RX_DEMODULATION 1 +#define CONFIG_SOC_RMT_SUPPORT_TX_ASYNC_STOP 1 +#define CONFIG_SOC_RMT_SUPPORT_TX_LOOP_COUNT 1 +#define CONFIG_SOC_RMT_SUPPORT_TX_LOOP_AUTO_STOP 1 +#define CONFIG_SOC_RMT_SUPPORT_TX_SYNCHRO 1 +#define CONFIG_SOC_RMT_SUPPORT_TX_CARRIER_DATA_ONLY 1 +#define CONFIG_SOC_RMT_SUPPORT_XTAL 1 +#define CONFIG_SOC_RMT_SUPPORT_RC_FAST 1 +#define CONFIG_SOC_RMT_SUPPORT_APB 1 +#define CONFIG_SOC_RMT_SUPPORT_DMA 1 +#define CONFIG_SOC_LCD_I80_SUPPORTED 1 +#define CONFIG_SOC_LCD_RGB_SUPPORTED 1 +#define CONFIG_SOC_LCD_I80_BUSES 1 +#define CONFIG_SOC_LCD_RGB_PANELS 1 +#define CONFIG_SOC_LCD_I80_BUS_WIDTH 16 +#define CONFIG_SOC_LCD_RGB_DATA_WIDTH 16 +#define CONFIG_SOC_LCD_SUPPORT_RGB_YUV_CONV 1 +#define CONFIG_SOC_RTC_CNTL_CPU_PD_DMA_BUS_WIDTH 128 +#define CONFIG_SOC_RTC_CNTL_CPU_PD_REG_FILE_NUM 549 +#define CONFIG_SOC_RTC_CNTL_TAGMEM_PD_DMA_BUS_WIDTH 128 +#define CONFIG_SOC_RTCIO_PIN_COUNT 22 +#define CONFIG_SOC_RTCIO_INPUT_OUTPUT_SUPPORTED 1 +#define CONFIG_SOC_RTCIO_HOLD_SUPPORTED 1 +#define CONFIG_SOC_RTCIO_WAKE_SUPPORTED 1 +#define CONFIG_SOC_SDM_GROUPS 1 +#define CONFIG_SOC_SDM_CHANNELS_PER_GROUP 8 +#define CONFIG_SOC_SDM_CLK_SUPPORT_APB 1 +#define CONFIG_SOC_SPI_PERIPH_NUM 3 +#define CONFIG_SOC_SPI_MAX_CS_NUM 6 +#define CONFIG_SOC_SPI_MAXIMUM_BUFFER_SIZE 64 +#define CONFIG_SOC_SPI_SUPPORT_DDRCLK 1 +#define CONFIG_SOC_SPI_SLAVE_SUPPORT_SEG_TRANS 1 +#define CONFIG_SOC_SPI_SUPPORT_CD_SIG 1 +#define CONFIG_SOC_SPI_SUPPORT_CONTINUOUS_TRANS 1 +#define CONFIG_SOC_SPI_SUPPORT_SLAVE_HD_VER2 1 +#define CONFIG_SOC_SPI_SUPPORT_CLK_APB 1 +#define CONFIG_SOC_SPI_SUPPORT_CLK_XTAL 1 +#define CONFIG_SOC_SPI_PERIPH_SUPPORT_CONTROL_DUMMY_OUT 1 +#define CONFIG_SOC_MEMSPI_IS_INDEPENDENT 1 +#define CONFIG_SOC_SPI_MAX_PRE_DIVIDER 16 +#define CONFIG_SOC_SPI_SUPPORT_OCT 1 +#define CONFIG_SOC_MEMSPI_SRC_FREQ_120M 1 +#define CONFIG_SOC_MEMSPI_SRC_FREQ_80M_SUPPORTED 1 +#define CONFIG_SOC_MEMSPI_SRC_FREQ_40M_SUPPORTED 1 +#define CONFIG_SOC_MEMSPI_SRC_FREQ_20M_SUPPORTED 1 +#define CONFIG_SOC_SPIRAM_SUPPORTED 1 +#define CONFIG_SOC_SPIRAM_XIP_SUPPORTED 1 +#define CONFIG_SOC_SYSTIMER_COUNTER_NUM 2 +#define CONFIG_SOC_SYSTIMER_ALARM_NUM 3 +#define CONFIG_SOC_SYSTIMER_BIT_WIDTH_LO 32 +#define CONFIG_SOC_SYSTIMER_BIT_WIDTH_HI 20 +#define CONFIG_SOC_SYSTIMER_FIXED_DIVIDER 1 +#define CONFIG_SOC_SYSTIMER_INT_LEVEL 1 +#define CONFIG_SOC_SYSTIMER_ALARM_MISS_COMPENSATE 1 +#define CONFIG_SOC_TIMER_GROUPS 2 +#define CONFIG_SOC_TIMER_GROUP_TIMERS_PER_GROUP 2 +#define CONFIG_SOC_TIMER_GROUP_COUNTER_BIT_WIDTH 54 +#define CONFIG_SOC_TIMER_GROUP_SUPPORT_XTAL 1 +#define CONFIG_SOC_TIMER_GROUP_SUPPORT_APB 1 +#define CONFIG_SOC_TIMER_GROUP_TOTAL_TIMERS 4 +#define CONFIG_SOC_TOUCH_VERSION_2 1 +#define CONFIG_SOC_TOUCH_SENSOR_NUM 15 +#define CONFIG_SOC_TOUCH_PROXIMITY_CHANNEL_NUM 3 +#define CONFIG_SOC_TOUCH_PROXIMITY_MEAS_DONE_SUPPORTED 1 +#define CONFIG_SOC_TOUCH_PAD_THRESHOLD_MAX 0x1FFFFF +#define CONFIG_SOC_TOUCH_PAD_MEASURE_WAIT_MAX 0xFF +#define CONFIG_SOC_TWAI_CONTROLLER_NUM 1 +#define CONFIG_SOC_TWAI_CLK_SUPPORT_APB 1 +#define CONFIG_SOC_TWAI_BRP_MIN 2 +#define CONFIG_SOC_TWAI_BRP_MAX 16384 +#define CONFIG_SOC_TWAI_SUPPORTS_RX_STATUS 1 +#define CONFIG_SOC_UART_NUM 3 +#define CONFIG_SOC_UART_FIFO_LEN 128 +#define CONFIG_SOC_UART_BITRATE_MAX 5000000 +#define CONFIG_SOC_UART_SUPPORT_FSM_TX_WAIT_SEND 1 +#define CONFIG_SOC_UART_SUPPORT_WAKEUP_INT 1 +#define CONFIG_SOC_UART_SUPPORT_APB_CLK 1 +#define CONFIG_SOC_UART_SUPPORT_RTC_CLK 1 +#define CONFIG_SOC_UART_SUPPORT_XTAL_CLK 1 +#define CONFIG_SOC_UART_REQUIRE_CORE_RESET 1 +#define CONFIG_SOC_USB_OTG_PERIPH_NUM 1 +#define CONFIG_SOC_SHA_DMA_MAX_BUFFER_SIZE 3968 +#define CONFIG_SOC_SHA_SUPPORT_DMA 1 +#define CONFIG_SOC_SHA_SUPPORT_RESUME 1 +#define CONFIG_SOC_SHA_GDMA 1 +#define CONFIG_SOC_SHA_SUPPORT_SHA1 1 +#define CONFIG_SOC_SHA_SUPPORT_SHA224 1 +#define CONFIG_SOC_SHA_SUPPORT_SHA256 1 +#define CONFIG_SOC_SHA_SUPPORT_SHA384 1 +#define CONFIG_SOC_SHA_SUPPORT_SHA512 1 +#define CONFIG_SOC_SHA_SUPPORT_SHA512_224 1 +#define CONFIG_SOC_SHA_SUPPORT_SHA512_256 1 +#define CONFIG_SOC_SHA_SUPPORT_SHA512_T 1 +#define CONFIG_SOC_RSA_MAX_BIT_LEN 4096 +#define CONFIG_SOC_AES_SUPPORT_DMA 1 +#define CONFIG_SOC_AES_GDMA 1 +#define CONFIG_SOC_AES_SUPPORT_AES_128 1 +#define CONFIG_SOC_AES_SUPPORT_AES_256 1 +#define CONFIG_SOC_PM_SUPPORT_EXT0_WAKEUP 1 +#define CONFIG_SOC_PM_SUPPORT_EXT1_WAKEUP 1 +#define CONFIG_SOC_PM_SUPPORT_EXT_WAKEUP 1 +#define CONFIG_SOC_PM_SUPPORT_WIFI_WAKEUP 1 +#define CONFIG_SOC_PM_SUPPORT_BT_WAKEUP 1 +#define CONFIG_SOC_PM_SUPPORT_TOUCH_SENSOR_WAKEUP 1 +#define CONFIG_SOC_PM_SUPPORT_CPU_PD 1 +#define CONFIG_SOC_PM_SUPPORT_TAGMEM_PD 1 +#define CONFIG_SOC_PM_SUPPORT_RTC_PERIPH_PD 1 +#define CONFIG_SOC_PM_SUPPORT_RC_FAST_PD 1 +#define CONFIG_SOC_PM_SUPPORT_VDDSDIO_PD 1 +#define CONFIG_SOC_PM_SUPPORT_MAC_BB_PD 1 +#define CONFIG_SOC_PM_SUPPORT_MODEM_PD 1 +#define CONFIG_SOC_CONFIGURABLE_VDDSDIO_SUPPORTED 1 +#define CONFIG_SOC_PM_SUPPORT_DEEPSLEEP_CHECK_STUB_ONLY 1 +#define CONFIG_SOC_PM_CPU_RETENTION_BY_RTCCNTL 1 +#define CONFIG_SOC_PM_MODEM_RETENTION_BY_BACKUPDMA 1 +#define CONFIG_SOC_CLK_RC_FAST_D256_SUPPORTED 1 +#define CONFIG_SOC_RTC_SLOW_CLK_SUPPORT_RC_FAST_D256 1 +#define CONFIG_SOC_CLK_RC_FAST_SUPPORT_CALIBRATION 1 +#define CONFIG_SOC_CLK_XTAL32K_SUPPORTED 1 +#define CONFIG_SOC_EFUSE_DIS_DOWNLOAD_ICACHE 1 +#define CONFIG_SOC_EFUSE_DIS_DOWNLOAD_DCACHE 1 +#define CONFIG_SOC_EFUSE_HARD_DIS_JTAG 1 +#define CONFIG_SOC_EFUSE_DIS_USB_JTAG 1 +#define CONFIG_SOC_EFUSE_SOFT_DIS_JTAG 1 +#define CONFIG_SOC_EFUSE_DIS_DIRECT_BOOT 1 +#define CONFIG_SOC_EFUSE_DIS_ICACHE 1 +#define CONFIG_SOC_EFUSE_BLOCK9_KEY_PURPOSE_QUIRK 1 +#define CONFIG_SOC_SECURE_BOOT_V2_RSA 1 +#define CONFIG_SOC_EFUSE_SECURE_BOOT_KEY_DIGESTS 3 +#define CONFIG_SOC_EFUSE_REVOKE_BOOT_KEY_DIGESTS 1 +#define CONFIG_SOC_SUPPORT_SECURE_BOOT_REVOKE_KEY 1 +#define CONFIG_SOC_FLASH_ENCRYPTED_XTS_AES_BLOCK_MAX 64 +#define CONFIG_SOC_FLASH_ENCRYPTION_XTS_AES 1 +#define CONFIG_SOC_FLASH_ENCRYPTION_XTS_AES_OPTIONS 1 +#define CONFIG_SOC_FLASH_ENCRYPTION_XTS_AES_128 1 +#define CONFIG_SOC_FLASH_ENCRYPTION_XTS_AES_256 1 +#define CONFIG_SOC_MEMPROT_CPU_PREFETCH_PAD_SIZE 16 +#define CONFIG_SOC_MEMPROT_MEM_ALIGN_SIZE 256 +#define CONFIG_SOC_PHY_DIG_REGS_MEM_SIZE 21 +#define CONFIG_SOC_MAC_BB_PD_MEM_SIZE 192 +#define CONFIG_SOC_WIFI_LIGHT_SLEEP_CLK_WIDTH 12 +#define CONFIG_SOC_SPI_MEM_SUPPORT_AUTO_WAIT_IDLE 1 +#define CONFIG_SOC_SPI_MEM_SUPPORT_AUTO_SUSPEND 1 +#define CONFIG_SOC_SPI_MEM_SUPPORT_AUTO_RESUME 1 +#define CONFIG_SOC_SPI_MEM_SUPPORT_SW_SUSPEND 1 +#define CONFIG_SOC_SPI_MEM_SUPPORT_OPI_MODE 1 +#define CONFIG_SOC_SPI_MEM_SUPPORT_TIME_TUNING 1 +#define CONFIG_SOC_SPI_MEM_SUPPORT_CONFIG_GPIO_BY_EFUSE 1 +#define CONFIG_SOC_SPI_MEM_SUPPORT_WRAP 1 +#define CONFIG_SOC_COEX_HW_PTI 1 +#define CONFIG_SOC_EXTERNAL_COEX_LEADER_TX_LINE 1 +#define CONFIG_SOC_SDMMC_USE_GPIO_MATRIX 1 +#define CONFIG_SOC_SDMMC_NUM_SLOTS 2 +#define CONFIG_SOC_SDMMC_SUPPORT_XTAL_CLOCK 1 +#define CONFIG_SOC_TEMPERATURE_SENSOR_SUPPORT_FAST_RC 1 +#define CONFIG_SOC_WIFI_HW_TSF 1 +#define CONFIG_SOC_WIFI_FTM_SUPPORT 1 +#define CONFIG_SOC_WIFI_GCMP_SUPPORT 1 +#define CONFIG_SOC_WIFI_WAPI_SUPPORT 1 +#define CONFIG_SOC_WIFI_CSI_SUPPORT 1 +#define CONFIG_SOC_WIFI_MESH_SUPPORT 1 +#define CONFIG_SOC_WIFI_SUPPORT_VARIABLE_BEACON_WINDOW 1 +#define CONFIG_SOC_BLE_SUPPORTED 1 +#define CONFIG_SOC_BLE_MESH_SUPPORTED 1 +#define CONFIG_SOC_BLE_50_SUPPORTED 1 +#define CONFIG_SOC_BLE_DEVICE_PRIVACY_SUPPORTED 1 +#define CONFIG_SOC_BLUFI_SUPPORTED 1 +#define CONFIG_SOC_ULP_HAS_ADC 1 +#define CONFIG_SOC_PHY_COMBO_MODULE 1 +#define CONFIG_IDF_CMAKE 1 +#define CONFIG_IDF_TARGET_ARCH_XTENSA 1 +#define CONFIG_IDF_TARGET_ARCH "xtensa" +#define CONFIG_IDF_TARGET "esp32s3" +#define CONFIG_IDF_TARGET_ESP32S3 1 +#define CONFIG_IDF_FIRMWARE_CHIP_ID 0x0009 +#define CONFIG_APP_BUILD_TYPE_APP_2NDBOOT 1 +#define CONFIG_APP_BUILD_GENERATE_BINARIES 1 +#define CONFIG_APP_BUILD_BOOTLOADER 1 +#define CONFIG_APP_BUILD_USE_FLASH_SECTIONS 1 +#define CONFIG_BOOTLOADER_OFFSET_IN_FLASH 0x0 +#define CONFIG_BOOTLOADER_COMPILER_OPTIMIZATION_SIZE 1 +#define CONFIG_BOOTLOADER_LOG_LEVEL_INFO 1 +#define CONFIG_BOOTLOADER_LOG_LEVEL 3 +#define CONFIG_BOOTLOADER_VDDSDIO_BOOST_1_9V 1 +#define CONFIG_BOOTLOADER_REGION_PROTECTION_ENABLE 1 +#define CONFIG_BOOTLOADER_WDT_ENABLE 1 +#define CONFIG_BOOTLOADER_WDT_TIME_MS 9000 +#define CONFIG_BOOTLOADER_RESERVE_RTC_SIZE 0x0 +#define CONFIG_BOOTLOADER_FLASH_XMC_SUPPORT 1 +#define CONFIG_SECURE_BOOT_V2_RSA_SUPPORTED 1 +#define CONFIG_SECURE_BOOT_V2_PREFERRED 1 +#define CONFIG_SECURE_ROM_DL_MODE_ENABLED 1 +#define CONFIG_APP_COMPILE_TIME_DATE 1 +#define CONFIG_APP_RETRIEVE_LEN_ELF_SHA 16 +#define CONFIG_ESP_ROM_HAS_CRC_LE 1 +#define CONFIG_ESP_ROM_HAS_CRC_BE 1 +#define CONFIG_ESP_ROM_HAS_MZ_CRC32 1 +#define CONFIG_ESP_ROM_HAS_JPEG_DECODE 1 +#define CONFIG_ESP_ROM_UART_CLK_IS_XTAL 1 +#define CONFIG_ESP_ROM_HAS_RETARGETABLE_LOCKING 1 +#define CONFIG_ESP_ROM_USB_OTG_NUM 3 +#define CONFIG_ESP_ROM_USB_SERIAL_DEVICE_NUM 4 +#define CONFIG_ESP_ROM_HAS_ERASE_0_REGION_BUG 1 +#define CONFIG_ESP_ROM_GET_CLK_FREQ 1 +#define CONFIG_ESP_ROM_HAS_HAL_WDT 1 +#define CONFIG_ESP_ROM_NEEDS_SWSETUP_WORKAROUND 1 +#define CONFIG_ESP_ROM_HAS_LAYOUT_TABLE 1 +#define CONFIG_ESP_ROM_HAS_SPI_FLASH 1 +#define CONFIG_ESP_ROM_HAS_ETS_PRINTF_BUG 1 +#define CONFIG_ESP_ROM_HAS_NEWLIB_NANO_FORMAT 1 +#define CONFIG_ESP_ROM_NEEDS_SET_CACHE_MMU_SIZE 1 +#define CONFIG_ESP_ROM_RAM_APP_NEEDS_MMU_INIT 1 +#define CONFIG_ESP_ROM_HAS_FLASH_COUNT_PAGES_BUG 1 +#define CONFIG_ESP_ROM_HAS_CACHE_SUSPEND_WAITI_BUG 1 +#define CONFIG_ESP_ROM_HAS_CACHE_WRITEBACK_BUG 1 +#define CONFIG_BOOT_ROM_LOG_ALWAYS_ON 1 +#define CONFIG_ESPTOOLPY_FLASH_MODE_AUTO_DETECT 1 +#define CONFIG_ESPTOOLPY_FLASHMODE_DIO 1 +#define CONFIG_ESPTOOLPY_FLASH_SAMPLE_MODE_STR 1 +#define CONFIG_ESPTOOLPY_FLASHMODE "dio" +#define CONFIG_ESPTOOLPY_FLASHFREQ_80M 1 +#define CONFIG_ESPTOOLPY_FLASHFREQ_80M_DEFAULT 1 +#define CONFIG_ESPTOOLPY_FLASHFREQ "80m" +#define CONFIG_ESPTOOLPY_FLASHSIZE_2MB 1 +#define CONFIG_ESPTOOLPY_FLASHSIZE "2MB" +#define CONFIG_ESPTOOLPY_BEFORE_RESET 1 +#define CONFIG_ESPTOOLPY_BEFORE "default_reset" +#define CONFIG_ESPTOOLPY_AFTER_RESET 1 +#define CONFIG_ESPTOOLPY_AFTER "hard_reset" +#define CONFIG_ESPTOOLPY_MONITOR_BAUD 115200 +#define CONFIG_PARTITION_TABLE_SINGLE_APP 1 +#define CONFIG_PARTITION_TABLE_CUSTOM_FILENAME "partitions.csv" +#define CONFIG_PARTITION_TABLE_FILENAME "partitions_singleapp.csv" +#define CONFIG_PARTITION_TABLE_OFFSET 0x8000 +#define CONFIG_PARTITION_TABLE_MD5 1 +#define CONFIG_COMPILER_OPTIMIZATION_SIZE 1 +#define CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_ENABLE 1 +#define CONFIG_COMPILER_FLOAT_LIB_FROM_GCCLIB 1 +#define CONFIG_COMPILER_OPTIMIZATION_ASSERTION_LEVEL 2 +#define CONFIG_COMPILER_HIDE_PATHS_MACROS 1 +#define CONFIG_COMPILER_STACK_CHECK_MODE_NONE 1 +#define CONFIG_APPTRACE_DEST_NONE 1 +#define CONFIG_APPTRACE_DEST_UART_NONE 1 +#define CONFIG_APPTRACE_UART_TASK_PRIO 1 +#define CONFIG_APPTRACE_LOCK_ENABLE 1 +#define CONFIG_BT_ENABLED 1 +#define CONFIG_BT_BLUEDROID_ENABLED 1 +#define CONFIG_BT_CONTROLLER_ENABLED 1 +#define CONFIG_BT_BTC_TASK_STACK_SIZE 3072 +#define CONFIG_BT_BLUEDROID_PINNED_TO_CORE_0 1 +#define CONFIG_BT_BLUEDROID_PINNED_TO_CORE 0 +#define CONFIG_BT_BTU_TASK_STACK_SIZE 4096 +#define CONFIG_BT_BLE_ENABLED 1 +#define CONFIG_BT_GATTS_ENABLE 1 +#define CONFIG_BT_GATT_MAX_SR_PROFILES 8 +#define CONFIG_BT_GATT_MAX_SR_ATTRIBUTES 100 +#define CONFIG_BT_GATTS_SEND_SERVICE_CHANGE_AUTO 1 +#define CONFIG_BT_GATTS_SEND_SERVICE_CHANGE_MODE 0 +#define CONFIG_BT_GATTC_ENABLE 1 +#define CONFIG_BT_GATTC_MAX_CACHE_CHAR 40 +#define CONFIG_BT_GATTC_NOTIF_REG_MAX 5 +#define CONFIG_BT_GATTC_CONNECT_RETRY_COUNT 3 +#define CONFIG_BT_BLE_SMP_ENABLE 1 +#define CONFIG_BT_LOG_HCI_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_HCI_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_BTM_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_BTM_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_L2CAP_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_L2CAP_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_RFCOMM_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_RFCOMM_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_SDP_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_SDP_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_GAP_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_GAP_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_BNEP_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_BNEP_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_PAN_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_PAN_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_A2D_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_A2D_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_AVDT_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_AVDT_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_AVCT_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_AVCT_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_AVRC_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_AVRC_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_MCA_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_MCA_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_HID_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_HID_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_APPL_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_APPL_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_GATT_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_GATT_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_SMP_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_SMP_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_BTIF_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_BTIF_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_BTC_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_BTC_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_OSI_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_OSI_TRACE_LEVEL 2 +#define CONFIG_BT_LOG_BLUFI_TRACE_LEVEL_WARNING 1 +#define CONFIG_BT_LOG_BLUFI_TRACE_LEVEL 2 +#define CONFIG_BT_ACL_CONNECTIONS 4 +#define CONFIG_BT_MULTI_CONNECTION_ENBALE 1 +#define CONFIG_BT_SMP_ENABLE 1 +#define CONFIG_BT_BLE_ESTAB_LINK_CONN_TOUT 30 +#define CONFIG_BT_MAX_DEVICE_NAME_LEN 32 +#define CONFIG_BT_BLE_RPA_TIMEOUT 900 +#define CONFIG_BT_BLE_50_FEATURES_SUPPORTED 1 +#define CONFIG_BT_CTRL_MODE_EFF 1 +#define CONFIG_BT_CTRL_BLE_MAX_ACT 6 +#define CONFIG_BT_CTRL_BLE_MAX_ACT_EFF 6 +#define CONFIG_BT_CTRL_BLE_STATIC_ACL_TX_BUF_NB 0 +#define CONFIG_BT_CTRL_PINNED_TO_CORE_0 1 +#define CONFIG_BT_CTRL_PINNED_TO_CORE 0 +#define CONFIG_BT_CTRL_HCI_MODE_VHCI 1 +#define CONFIG_BT_CTRL_HCI_TL 1 +#define CONFIG_BT_CTRL_ADV_DUP_FILT_MAX 30 +#define CONFIG_BT_BLE_CCA_MODE_NONE 1 +#define CONFIG_BT_BLE_CCA_MODE 0 +#define CONFIG_BT_CTRL_HW_CCA_VAL 20 +#define CONFIG_BT_CTRL_HW_CCA_EFF 0 +#define CONFIG_BT_CTRL_CE_LENGTH_TYPE_ORIG 1 +#define CONFIG_BT_CTRL_CE_LENGTH_TYPE_EFF 0 +#define CONFIG_BT_CTRL_TX_ANTENNA_INDEX_0 1 +#define CONFIG_BT_CTRL_TX_ANTENNA_INDEX_EFF 0 +#define CONFIG_BT_CTRL_RX_ANTENNA_INDEX_0 1 +#define CONFIG_BT_CTRL_RX_ANTENNA_INDEX_EFF 0 +#define CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_P9 1 +#define CONFIG_BT_CTRL_DFT_TX_POWER_LEVEL_EFF 11 +#define CONFIG_BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_SUPP 1 +#define CONFIG_BT_CTRL_BLE_ADV_REPORT_FLOW_CTRL_NUM 100 +#define CONFIG_BT_CTRL_BLE_ADV_REPORT_DISCARD_THRSHOLD 20 +#define CONFIG_BT_CTRL_BLE_SCAN_DUPL 1 +#define CONFIG_BT_CTRL_SCAN_DUPL_TYPE_DEVICE 1 +#define CONFIG_BT_CTRL_SCAN_DUPL_TYPE 0 +#define CONFIG_BT_CTRL_SCAN_DUPL_CACHE_SIZE 100 +#define CONFIG_BT_CTRL_DUPL_SCAN_CACHE_REFRESH_PERIOD 0 +#define CONFIG_BT_CTRL_COEX_PHY_CODED_TX_RX_TLIM_DIS 1 +#define CONFIG_BT_CTRL_COEX_PHY_CODED_TX_RX_TLIM_EFF 0 +#define CONFIG_BT_CTRL_SLEEP_MODE_EFF 0 +#define CONFIG_BT_CTRL_SLEEP_CLOCK_EFF 0 +#define CONFIG_BT_CTRL_HCI_TL_EFF 1 +#define CONFIG_SPI_MASTER_ISR_IN_IRAM 1 +#define CONFIG_SPI_SLAVE_ISR_IN_IRAM 1 +#define CONFIG_TWAI_ERRATA_FIX_LISTEN_ONLY_DOM 1 +#define CONFIG_GPTIMER_ISR_HANDLER_IN_IRAM 1 +#define CONFIG_EFUSE_MAX_BLK_LEN 256 +#define CONFIG_ESP_TLS_USING_MBEDTLS 1 +#define CONFIG_ESP_TLS_USE_DS_PERIPHERAL 1 +#define CONFIG_ESP_COEX_SW_COEXIST_ENABLE 1 +#define CONFIG_ESP_ERR_TO_NAME_LOOKUP 1 +#define CONFIG_ETH_ENABLED 1 +#define CONFIG_ETH_USE_SPI_ETHERNET 1 +#define CONFIG_ESP_EVENT_POST_FROM_ISR 1 +#define CONFIG_ESP_EVENT_POST_FROM_IRAM_ISR 1 +#define CONFIG_ESP_HTTP_CLIENT_ENABLE_HTTPS 1 +#define CONFIG_HTTPD_MAX_REQ_HDR_LEN 512 +#define CONFIG_HTTPD_MAX_URI_LEN 512 +#define CONFIG_HTTPD_ERR_RESP_NO_DELAY 1 +#define CONFIG_HTTPD_PURGE_BUF_LEN 32 +#define CONFIG_ESP32S3_REV_MIN_0 1 +#define CONFIG_ESP32S3_REV_MIN_FULL 0 +#define CONFIG_ESP_REV_MIN_FULL 0 +#define CONFIG_ESP32S3_REV_MAX_FULL 99 +#define CONFIG_ESP_REV_MAX_FULL 99 +#define CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_STA 1 +#define CONFIG_ESP_MAC_ADDR_UNIVERSE_WIFI_AP 1 +#define CONFIG_ESP_MAC_ADDR_UNIVERSE_BT 1 +#define CONFIG_ESP_MAC_ADDR_UNIVERSE_ETH 1 +#define CONFIG_ESP_MAC_UNIVERSAL_MAC_ADDRESSES_FOUR 1 +#define CONFIG_ESP32S3_UNIVERSAL_MAC_ADDRESSES_FOUR 1 +#define CONFIG_ESP32S3_UNIVERSAL_MAC_ADDRESSES 4 +#define CONFIG_ESP_SLEEP_FLASH_LEAKAGE_WORKAROUND 1 +#define CONFIG_ESP_SLEEP_MSPI_NEED_ALL_IO_PU 1 +#define CONFIG_ESP_SLEEP_RTC_BUS_ISO_WORKAROUND 1 +#define CONFIG_ESP_SLEEP_GPIO_RESET_WORKAROUND 1 +#define CONFIG_ESP_SLEEP_WAIT_FLASH_READY_EXTRA_DELAY 2000 +#define CONFIG_ESP_SLEEP_GPIO_ENABLE_INTERNAL_RESISTORS 1 +#define CONFIG_RTC_CLK_SRC_INT_RC 1 +#define CONFIG_RTC_CLK_CAL_CYCLES 1024 +#define CONFIG_PERIPH_CTRL_FUNC_IN_IRAM 1 +#define CONFIG_XTAL_FREQ_40 1 +#define CONFIG_XTAL_FREQ 40 +#define CONFIG_LCD_PANEL_IO_FORMAT_BUF_SIZE 32 +#define CONFIG_ESP_NETIF_IP_LOST_TIMER_INTERVAL 120 +#define CONFIG_ESP_NETIF_TCPIP_LWIP 1 +#define CONFIG_ESP_NETIF_USES_TCPIP_WITH_BSD_API 1 +#define CONFIG_ESP_PHY_CALIBRATION_AND_DATA_STORAGE 1 +#define CONFIG_ESP_PHY_MAX_WIFI_TX_POWER 20 +#define CONFIG_ESP_PHY_MAX_TX_POWER 20 +#define CONFIG_ESP_PHY_ENABLE_USB 1 +#define CONFIG_ESP_PHY_RF_CAL_PARTIAL 1 +#define CONFIG_ESP_PHY_CALIBRATION_MODE 0 +#define CONFIG_PM_POWER_DOWN_CPU_IN_LIGHT_SLEEP 1 +#define CONFIG_PM_POWER_DOWN_TAGMEM_IN_LIGHT_SLEEP 1 +#define CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ_160 1 +#define CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ 160 +#define CONFIG_ESP32S3_INSTRUCTION_CACHE_16KB 1 +#define CONFIG_ESP32S3_INSTRUCTION_CACHE_SIZE 0x4000 +#define CONFIG_ESP32S3_INSTRUCTION_CACHE_8WAYS 1 +#define CONFIG_ESP32S3_ICACHE_ASSOCIATED_WAYS 8 +#define CONFIG_ESP32S3_INSTRUCTION_CACHE_LINE_32B 1 +#define CONFIG_ESP32S3_INSTRUCTION_CACHE_LINE_SIZE 32 +#define CONFIG_ESP32S3_DATA_CACHE_32KB 1 +#define CONFIG_ESP32S3_DATA_CACHE_SIZE 0x8000 +#define CONFIG_ESP32S3_DATA_CACHE_8WAYS 1 +#define CONFIG_ESP32S3_DCACHE_ASSOCIATED_WAYS 8 +#define CONFIG_ESP32S3_DATA_CACHE_LINE_32B 1 +#define CONFIG_ESP32S3_DATA_CACHE_LINE_SIZE 32 +#define CONFIG_ESP32S3_TRACEMEM_RESERVE_DRAM 0x0 +#define CONFIG_ESP_SYSTEM_PANIC_PRINT_REBOOT 1 +#define CONFIG_ESP_SYSTEM_PANIC_REBOOT_DELAY_SECONDS 0 +#define CONFIG_ESP_SYSTEM_RTC_FAST_MEM_AS_HEAP_DEPCHECK 1 +#define CONFIG_ESP_SYSTEM_ALLOW_RTC_FAST_MEM_AS_HEAP 1 +#define CONFIG_ESP_SYSTEM_MEMPROT_FEATURE 1 +#define CONFIG_ESP_SYSTEM_MEMPROT_FEATURE_LOCK 1 +#define CONFIG_ESP_SYSTEM_EVENT_QUEUE_SIZE 32 +#define CONFIG_ESP_SYSTEM_EVENT_TASK_STACK_SIZE 2304 +#define CONFIG_ESP_MAIN_TASK_STACK_SIZE 3584 +#define CONFIG_ESP_MAIN_TASK_AFFINITY_CPU0 1 +#define CONFIG_ESP_MAIN_TASK_AFFINITY 0x0 +#define CONFIG_ESP_MINIMAL_SHARED_STACK_SIZE 2048 +#define CONFIG_ESP_CONSOLE_UART_DEFAULT 1 +#define CONFIG_ESP_CONSOLE_SECONDARY_USB_SERIAL_JTAG 1 +#define CONFIG_ESP_CONSOLE_USB_SERIAL_JTAG_ENABLED 1 +#define CONFIG_ESP_CONSOLE_UART 1 +#define CONFIG_ESP_CONSOLE_MULTIPLE_UART 1 +#define CONFIG_ESP_CONSOLE_UART_NUM 0 +#define CONFIG_ESP_CONSOLE_UART_BAUDRATE 115200 +#define CONFIG_ESP_INT_WDT 1 +#define CONFIG_ESP_INT_WDT_TIMEOUT_MS 300 +#define CONFIG_ESP_INT_WDT_CHECK_CPU1 1 +#define CONFIG_ESP_TASK_WDT_EN 1 +#define CONFIG_ESP_TASK_WDT_INIT 1 +#define CONFIG_ESP_TASK_WDT_TIMEOUT_S 5 +#define CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU0 1 +#define CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU1 1 +#define CONFIG_ESP_DEBUG_OCDAWARE 1 +#define CONFIG_ESP_SYSTEM_CHECK_INT_LEVEL_4 1 +#define CONFIG_ESP_BROWNOUT_DET 1 +#define CONFIG_ESP_BROWNOUT_DET_LVL_SEL_7 1 +#define CONFIG_ESP_BROWNOUT_DET_LVL 7 +#define CONFIG_ESP_SYSTEM_BROWNOUT_INTR 1 +#define CONFIG_ESP_IPC_TASK_STACK_SIZE 1280 +#define CONFIG_ESP_IPC_USES_CALLERS_PRIORITY 1 +#define CONFIG_ESP_IPC_ISR_ENABLE 1 +#define CONFIG_ESP_TIME_FUNCS_USE_RTC_TIMER 1 +#define CONFIG_ESP_TIME_FUNCS_USE_ESP_TIMER 1 +#define CONFIG_ESP_TIMER_TASK_STACK_SIZE 3584 +#define CONFIG_ESP_TIMER_INTERRUPT_LEVEL 1 +#define CONFIG_ESP_TIMER_TASK_AFFINITY 0x0 +#define CONFIG_ESP_TIMER_TASK_AFFINITY_CPU0 1 +#define CONFIG_ESP_TIMER_ISR_AFFINITY 0x1 +#define CONFIG_ESP_TIMER_ISR_AFFINITY_CPU0 1 +#define CONFIG_ESP_TIMER_IMPL_SYSTIMER 1 +#define CONFIG_ESP_WIFI_ENABLED 1 +#define CONFIG_ESP_WIFI_STATIC_RX_BUFFER_NUM 10 +#define CONFIG_ESP_WIFI_DYNAMIC_RX_BUFFER_NUM 32 +#define CONFIG_ESP_WIFI_DYNAMIC_TX_BUFFER 1 +#define CONFIG_ESP_WIFI_TX_BUFFER_TYPE 1 +#define CONFIG_ESP_WIFI_DYNAMIC_TX_BUFFER_NUM 32 +#define CONFIG_ESP_WIFI_STATIC_RX_MGMT_BUFFER 1 +#define CONFIG_ESP_WIFI_DYNAMIC_RX_MGMT_BUF 0 +#define CONFIG_ESP_WIFI_RX_MGMT_BUF_NUM_DEF 5 +#define CONFIG_ESP_WIFI_AMPDU_TX_ENABLED 1 +#define CONFIG_ESP_WIFI_TX_BA_WIN 6 +#define CONFIG_ESP_WIFI_AMPDU_RX_ENABLED 1 +#define CONFIG_ESP_WIFI_RX_BA_WIN 6 +#define CONFIG_ESP_WIFI_NVS_ENABLED 1 +#define CONFIG_ESP_WIFI_TASK_PINNED_TO_CORE_0 1 +#define CONFIG_ESP_WIFI_SOFTAP_BEACON_MAX_LEN 752 +#define CONFIG_ESP_WIFI_MGMT_SBUF_NUM 32 +#define CONFIG_ESP_WIFI_IRAM_OPT 1 +#define CONFIG_ESP_WIFI_RX_IRAM_OPT 1 +#define CONFIG_ESP_WIFI_ENABLE_WPA3_SAE 1 +#define CONFIG_ESP_WIFI_ENABLE_SAE_PK 1 +#define CONFIG_ESP_WIFI_SOFTAP_SAE_SUPPORT 1 +#define CONFIG_ESP_WIFI_STA_DISCONNECTED_PM_ENABLE 1 +#define CONFIG_ESP_WIFI_SOFTAP_SUPPORT 1 +#define CONFIG_ESP_WIFI_ESPNOW_MAX_ENCRYPT_NUM 7 +#define CONFIG_ESP_WIFI_MBEDTLS_CRYPTO 1 +#define CONFIG_ESP_WIFI_ENTERPRISE_SUPPORT 1 +#define CONFIG_ESP_COREDUMP_ENABLE_TO_NONE 1 +#define CONFIG_FATFS_VOLUME_COUNT 2 +#define CONFIG_FATFS_LFN_NONE 1 +#define CONFIG_FATFS_SECTOR_4096 1 +#define CONFIG_FATFS_CODEPAGE_437 1 +#define CONFIG_FATFS_CODEPAGE 437 +#define CONFIG_FATFS_FS_LOCK 0 +#define CONFIG_FATFS_TIMEOUT_MS 10000 +#define CONFIG_FATFS_PER_FILE_CACHE 1 +#define CONFIG_FATFS_VFS_FSTAT_BLKSIZE 0 +#define CONFIG_FREERTOS_HZ 100 +#define CONFIG_FREERTOS_CHECK_STACKOVERFLOW_CANARY 1 +#define CONFIG_FREERTOS_THREAD_LOCAL_STORAGE_POINTERS 1 +#define CONFIG_FREERTOS_IDLE_TASK_STACKSIZE 1536 +#define CONFIG_FREERTOS_MAX_TASK_NAME_LEN 16 +#define CONFIG_FREERTOS_TIMER_TASK_PRIORITY 1 +#define CONFIG_FREERTOS_TIMER_TASK_STACK_DEPTH 2048 +#define CONFIG_FREERTOS_TIMER_QUEUE_LENGTH 10 +#define CONFIG_FREERTOS_QUEUE_REGISTRY_SIZE 0 +#define CONFIG_FREERTOS_TASK_NOTIFICATION_ARRAY_ENTRIES 1 +#define CONFIG_FREERTOS_TLSP_DELETION_CALLBACKS 1 +#define CONFIG_FREERTOS_CHECK_MUTEX_GIVEN_BY_OWNER 1 +#define CONFIG_FREERTOS_ISR_STACKSIZE 1536 +#define CONFIG_FREERTOS_INTERRUPT_BACKTRACE 1 +#define CONFIG_FREERTOS_TICK_SUPPORT_SYSTIMER 1 +#define CONFIG_FREERTOS_CORETIMER_SYSTIMER_LVL1 1 +#define CONFIG_FREERTOS_SYSTICK_USES_SYSTIMER 1 +#define CONFIG_FREERTOS_ENABLE_TASK_SNAPSHOT 1 +#define CONFIG_FREERTOS_NO_AFFINITY 0x7FFFFFFF +#define CONFIG_FREERTOS_SUPPORT_STATIC_ALLOCATION 1 +#define CONFIG_FREERTOS_DEBUG_OCDAWARE 1 +#define CONFIG_HAL_ASSERTION_EQUALS_SYSTEM 1 +#define CONFIG_HAL_DEFAULT_ASSERTION_LEVEL 2 +#define CONFIG_HAL_WDT_USE_ROM_IMPL 1 +#define CONFIG_HAL_SPI_MASTER_FUNC_IN_IRAM 1 +#define CONFIG_HAL_SPI_SLAVE_FUNC_IN_IRAM 1 +#define CONFIG_HEAP_POISONING_DISABLED 1 +#define CONFIG_HEAP_TRACING_OFF 1 +#define CONFIG_LOG_DEFAULT_LEVEL_INFO 1 +#define CONFIG_LOG_DEFAULT_LEVEL 3 +#define CONFIG_LOG_MAXIMUM_EQUALS_DEFAULT 1 +#define CONFIG_LOG_MAXIMUM_LEVEL 3 +#define CONFIG_LOG_COLORS 1 +#define CONFIG_LOG_TIMESTAMP_SOURCE_RTOS 1 +#define CONFIG_LWIP_LOCAL_HOSTNAME "espressif" +#define CONFIG_LWIP_TCPIP_TASK_PRIO 18 +#define CONFIG_LWIP_DNS_SUPPORT_MDNS_QUERIES 1 +#define CONFIG_LWIP_TIMERS_ONDEMAND 1 +#define CONFIG_LWIP_ND6 1 +#define CONFIG_LWIP_MAX_SOCKETS 10 +#define CONFIG_LWIP_SO_REUSE 1 +#define CONFIG_LWIP_SO_REUSE_RXTOALL 1 +#define CONFIG_LWIP_IP4_FRAG 1 +#define CONFIG_LWIP_IP6_FRAG 1 +#define CONFIG_LWIP_IP_REASS_MAX_PBUFS 10 +#define CONFIG_LWIP_ESP_GRATUITOUS_ARP 1 +#define CONFIG_LWIP_GARP_TMR_INTERVAL 60 +#define CONFIG_LWIP_ESP_MLDV6_REPORT 1 +#define CONFIG_LWIP_MLDV6_TMR_INTERVAL 40 +#define CONFIG_LWIP_TCPIP_RECVMBOX_SIZE 32 +#define CONFIG_LWIP_DHCP_DOES_ARP_CHECK 1 +#define CONFIG_LWIP_DHCP_DISABLE_VENDOR_CLASS_ID 1 +#define CONFIG_LWIP_DHCP_OPTIONS_LEN 68 +#define CONFIG_LWIP_NUM_NETIF_CLIENT_DATA 0 +#define CONFIG_LWIP_DHCP_COARSE_TIMER_SECS 1 +#define CONFIG_LWIP_DHCPS 1 +#define CONFIG_LWIP_DHCPS_LEASE_UNIT 60 +#define CONFIG_LWIP_DHCPS_MAX_STATION_NUM 8 +#define CONFIG_LWIP_IPV4 1 +#define CONFIG_LWIP_IPV6 1 +#define CONFIG_LWIP_IPV6_NUM_ADDRESSES 3 +#define CONFIG_LWIP_NETIF_LOOPBACK 1 +#define CONFIG_LWIP_LOOPBACK_MAX_PBUFS 8 +#define CONFIG_LWIP_MAX_ACTIVE_TCP 16 +#define CONFIG_LWIP_MAX_LISTENING_TCP 16 +#define CONFIG_LWIP_TCP_HIGH_SPEED_RETRANSMISSION 1 +#define CONFIG_LWIP_TCP_MAXRTX 12 +#define CONFIG_LWIP_TCP_SYNMAXRTX 12 +#define CONFIG_LWIP_TCP_MSS 1440 +#define CONFIG_LWIP_TCP_TMR_INTERVAL 250 +#define CONFIG_LWIP_TCP_MSL 60000 +#define CONFIG_LWIP_TCP_FIN_WAIT_TIMEOUT 20000 +#define CONFIG_LWIP_TCP_SND_BUF_DEFAULT 5760 +#define CONFIG_LWIP_TCP_WND_DEFAULT 5760 +#define CONFIG_LWIP_TCP_RECVMBOX_SIZE 6 +#define CONFIG_LWIP_TCP_QUEUE_OOSEQ 1 +#define CONFIG_LWIP_TCP_OOSEQ_TIMEOUT 6 +#define CONFIG_LWIP_TCP_OOSEQ_MAX_PBUFS 4 +#define CONFIG_LWIP_TCP_OVERSIZE_MSS 1 +#define CONFIG_LWIP_TCP_RTO_TIME 1500 +#define CONFIG_LWIP_MAX_UDP_PCBS 16 +#define CONFIG_LWIP_UDP_RECVMBOX_SIZE 6 +#define CONFIG_LWIP_CHECKSUM_CHECK_ICMP 1 +#define CONFIG_LWIP_TCPIP_TASK_STACK_SIZE 3072 +#define CONFIG_LWIP_TCPIP_TASK_AFFINITY_NO_AFFINITY 1 +#define CONFIG_LWIP_TCPIP_TASK_AFFINITY 0x7FFFFFFF +#define CONFIG_LWIP_IPV6_MEMP_NUM_ND6_QUEUE 3 +#define CONFIG_LWIP_IPV6_ND6_NUM_NEIGHBORS 5 +#define CONFIG_LWIP_ICMP 1 +#define CONFIG_LWIP_MAX_RAW_PCBS 16 +#define CONFIG_LWIP_SNTP_MAX_SERVERS 1 +#define CONFIG_LWIP_SNTP_UPDATE_DELAY 3600000 +#define CONFIG_LWIP_BRIDGEIF_MAX_PORTS 7 +#define CONFIG_LWIP_ESP_LWIP_ASSERT 1 +#define CONFIG_LWIP_HOOK_TCP_ISN_DEFAULT 1 +#define CONFIG_LWIP_HOOK_IP6_ROUTE_NONE 1 +#define CONFIG_LWIP_HOOK_ND6_GET_GW_NONE 1 +#define CONFIG_LWIP_HOOK_IP6_SELECT_SRC_ADDR_NONE 1 +#define CONFIG_LWIP_HOOK_NETCONN_EXT_RESOLVE_NONE 1 +#define CONFIG_LWIP_HOOK_IP6_INPUT_NONE 1 +#define CONFIG_MBEDTLS_INTERNAL_MEM_ALLOC 1 +#define CONFIG_MBEDTLS_ASYMMETRIC_CONTENT_LEN 1 +#define CONFIG_MBEDTLS_SSL_IN_CONTENT_LEN 16384 +#define CONFIG_MBEDTLS_SSL_OUT_CONTENT_LEN 4096 +#define CONFIG_MBEDTLS_SSL_KEEP_PEER_CERTIFICATE 1 +#define CONFIG_MBEDTLS_PKCS7_C 1 +#define CONFIG_MBEDTLS_CERTIFICATE_BUNDLE 1 +#define CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_DEFAULT_FULL 1 +#define CONFIG_MBEDTLS_CERTIFICATE_BUNDLE_MAX_CERTS 200 +#define CONFIG_MBEDTLS_CMAC_C 1 +#define CONFIG_MBEDTLS_HARDWARE_AES 1 +#define CONFIG_MBEDTLS_AES_USE_INTERRUPT 1 +#define CONFIG_MBEDTLS_HARDWARE_MPI 1 +#define CONFIG_MBEDTLS_MPI_USE_INTERRUPT 1 +#define CONFIG_MBEDTLS_HARDWARE_SHA 1 +#define CONFIG_MBEDTLS_ROM_MD5 1 +#define CONFIG_MBEDTLS_HAVE_TIME 1 +#define CONFIG_MBEDTLS_ECDSA_DETERMINISTIC 1 +#define CONFIG_MBEDTLS_SHA512_C 1 +#define CONFIG_MBEDTLS_TLS_SERVER_AND_CLIENT 1 +#define CONFIG_MBEDTLS_TLS_SERVER 1 +#define CONFIG_MBEDTLS_TLS_CLIENT 1 +#define CONFIG_MBEDTLS_TLS_ENABLED 1 +#define CONFIG_MBEDTLS_KEY_EXCHANGE_RSA 1 +#define CONFIG_MBEDTLS_KEY_EXCHANGE_ELLIPTIC_CURVE 1 +#define CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_RSA 1 +#define CONFIG_MBEDTLS_KEY_EXCHANGE_ECDHE_ECDSA 1 +#define CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_ECDSA 1 +#define CONFIG_MBEDTLS_KEY_EXCHANGE_ECDH_RSA 1 +#define CONFIG_MBEDTLS_SSL_RENEGOTIATION 1 +#define CONFIG_MBEDTLS_SSL_PROTO_TLS1_2 1 +#define CONFIG_MBEDTLS_SSL_ALPN 1 +#define CONFIG_MBEDTLS_CLIENT_SSL_SESSION_TICKETS 1 +#define CONFIG_MBEDTLS_SERVER_SSL_SESSION_TICKETS 1 +#define CONFIG_MBEDTLS_AES_C 1 +#define CONFIG_MBEDTLS_CCM_C 1 +#define CONFIG_MBEDTLS_GCM_C 1 +#define CONFIG_MBEDTLS_PEM_PARSE_C 1 +#define CONFIG_MBEDTLS_PEM_WRITE_C 1 +#define CONFIG_MBEDTLS_X509_CRL_PARSE_C 1 +#define CONFIG_MBEDTLS_X509_CSR_PARSE_C 1 +#define CONFIG_MBEDTLS_ECP_C 1 +#define CONFIG_MBEDTLS_ECDH_C 1 +#define CONFIG_MBEDTLS_ECDSA_C 1 +#define CONFIG_MBEDTLS_ECP_DP_SECP192R1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_SECP224R1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_SECP256R1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_SECP384R1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_SECP521R1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_SECP192K1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_SECP224K1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_SECP256K1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_BP256R1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_BP384R1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_BP512R1_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_DP_CURVE25519_ENABLED 1 +#define CONFIG_MBEDTLS_ECP_NIST_OPTIM 1 +#define CONFIG_MBEDTLS_ECP_FIXED_POINT_OPTIM 1 +#define CONFIG_MQTT_PROTOCOL_311 1 +#define CONFIG_MQTT_TRANSPORT_SSL 1 +#define CONFIG_MQTT_TRANSPORT_WEBSOCKET 1 +#define CONFIG_MQTT_TRANSPORT_WEBSOCKET_SECURE 1 +#define CONFIG_NEWLIB_STDOUT_LINE_ENDING_CRLF 1 +#define CONFIG_NEWLIB_STDIN_LINE_ENDING_CR 1 +#define CONFIG_NEWLIB_TIME_SYSCALL_USE_RTC_HRT 1 +#define CONFIG_OPENTHREAD_NETWORK_NAME "OpenThread-ESP" +#define CONFIG_OPENTHREAD_MESH_LOCAL_PREFIX "fd00:db8:a0:0::/64" +#define CONFIG_OPENTHREAD_NETWORK_CHANNEL 15 +#define CONFIG_OPENTHREAD_NETWORK_PANID 0x1234 +#define CONFIG_OPENTHREAD_NETWORK_EXTPANID "dead00beef00cafe" +#define CONFIG_OPENTHREAD_NETWORK_MASTERKEY "00112233445566778899aabbccddeeff" +#define CONFIG_OPENTHREAD_NETWORK_PSKC "104810e2315100afd6bc9215a6bfac53" +#define CONFIG_OPENTHREAD_XTAL_ACCURACY 130 +#define CONFIG_ESP_PROTOCOMM_SUPPORT_SECURITY_VERSION_0 1 +#define CONFIG_ESP_PROTOCOMM_SUPPORT_SECURITY_VERSION_1 1 +#define CONFIG_ESP_PROTOCOMM_SUPPORT_SECURITY_VERSION_2 1 +#define CONFIG_PTHREAD_TASK_PRIO_DEFAULT 5 +#define CONFIG_PTHREAD_TASK_STACK_SIZE_DEFAULT 3072 +#define CONFIG_PTHREAD_DEFAULT_CORE_NO_AFFINITY 1 +#define CONFIG_PTHREAD_TASK_CORE_DEFAULT -1 +#define CONFIG_PTHREAD_TASK_NAME_DEFAULT "pthread" +#define CONFIG_MMU_PAGE_SIZE_64KB 1 +#define CONFIG_MMU_PAGE_MODE "64KB" +#define CONFIG_MMU_PAGE_SIZE 0x10000 +#define CONFIG_SPI_FLASH_ROM_DRIVER_PATCH 1 +#define CONFIG_SPI_FLASH_DANGEROUS_WRITE_ABORTS 1 +#define CONFIG_SPI_FLASH_YIELD_DURING_ERASE 1 +#define CONFIG_SPI_FLASH_ERASE_YIELD_DURATION_MS 20 +#define CONFIG_SPI_FLASH_ERASE_YIELD_TICKS 1 +#define CONFIG_SPI_FLASH_WRITE_CHUNK_SIZE 8192 +#define CONFIG_SPI_FLASH_BROWNOUT_RESET_XMC 1 +#define CONFIG_SPI_FLASH_BROWNOUT_RESET 1 +#define CONFIG_SPI_FLASH_VENDOR_XMC_SUPPORTED 1 +#define CONFIG_SPI_FLASH_VENDOR_GD_SUPPORTED 1 +#define CONFIG_SPI_FLASH_VENDOR_ISSI_SUPPORTED 1 +#define CONFIG_SPI_FLASH_VENDOR_MXIC_SUPPORTED 1 +#define CONFIG_SPI_FLASH_VENDOR_WINBOND_SUPPORTED 1 +#define CONFIG_SPI_FLASH_VENDOR_BOYA_SUPPORTED 1 +#define CONFIG_SPI_FLASH_VENDOR_TH_SUPPORTED 1 +#define CONFIG_SPI_FLASH_SUPPORT_ISSI_CHIP 1 +#define CONFIG_SPI_FLASH_SUPPORT_MXIC_CHIP 1 +#define CONFIG_SPI_FLASH_SUPPORT_GD_CHIP 1 +#define CONFIG_SPI_FLASH_SUPPORT_WINBOND_CHIP 1 +#define CONFIG_SPI_FLASH_SUPPORT_BOYA_CHIP 1 +#define CONFIG_SPI_FLASH_SUPPORT_TH_CHIP 1 +#define CONFIG_SPI_FLASH_SUPPORT_MXIC_OPI_CHIP 1 +#define CONFIG_SPI_FLASH_ENABLE_ENCRYPTED_READ_WRITE 1 +#define CONFIG_SPIFFS_MAX_PARTITIONS 3 +#define CONFIG_SPIFFS_CACHE 1 +#define CONFIG_SPIFFS_CACHE_WR 1 +#define CONFIG_SPIFFS_PAGE_CHECK 1 +#define CONFIG_SPIFFS_GC_MAX_RUNS 10 +#define CONFIG_SPIFFS_PAGE_SIZE 256 +#define CONFIG_SPIFFS_OBJ_NAME_LEN 32 +#define CONFIG_SPIFFS_USE_MAGIC 1 +#define CONFIG_SPIFFS_USE_MAGIC_LENGTH 1 +#define CONFIG_SPIFFS_META_LENGTH 4 +#define CONFIG_SPIFFS_USE_MTIME 1 +#define CONFIG_WS_TRANSPORT 1 +#define CONFIG_WS_BUFFER_SIZE 1024 +#define CONFIG_UNITY_ENABLE_FLOAT 1 +#define CONFIG_UNITY_ENABLE_DOUBLE 1 +#define CONFIG_UNITY_ENABLE_IDF_TEST_RUNNER 1 +#define CONFIG_USB_OTG_SUPPORTED 1 +#define CONFIG_USB_HOST_CONTROL_TRANSFER_MAX_SIZE 256 +#define CONFIG_USB_HOST_HW_BUFFER_BIAS_BALANCED 1 +#define CONFIG_USB_HOST_DEBOUNCE_DELAY_MS 250 +#define CONFIG_USB_HOST_RESET_HOLD_MS 30 +#define CONFIG_USB_HOST_RESET_RECOVERY_MS 30 +#define CONFIG_USB_HOST_SET_ADDR_RECOVERY_MS 10 +#define CONFIG_VFS_SUPPORT_IO 1 +#define CONFIG_VFS_SUPPORT_DIR 1 +#define CONFIG_VFS_SUPPORT_SELECT 1 +#define CONFIG_VFS_SUPPRESS_SELECT_DEBUG_OUTPUT 1 +#define CONFIG_VFS_SUPPORT_TERMIOS 1 +#define CONFIG_VFS_MAX_COUNT 8 +#define CONFIG_VFS_SEMIHOSTFS_MAX_MOUNT_POINTS 1 +#define CONFIG_WL_SECTOR_SIZE_4096 1 +#define CONFIG_WL_SECTOR_SIZE 4096 +#define CONFIG_WIFI_PROV_SCAN_MAX_ENTRIES 16 +#define CONFIG_WIFI_PROV_AUTOSTOP_TIMEOUT 30 +#define CONFIG_WIFI_PROV_STA_ALL_CHANNEL_SCAN 1 + +/* List of deprecated options */ +#define CONFIG_A2D_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_A2D_TRACE_LEVEL +#define CONFIG_A2D_TRACE_LEVEL_WARNING CONFIG_BT_LOG_A2D_TRACE_LEVEL_WARNING +#define CONFIG_APPL_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_APPL_TRACE_LEVEL +#define CONFIG_APPL_TRACE_LEVEL_WARNING CONFIG_BT_LOG_APPL_TRACE_LEVEL_WARNING +#define CONFIG_AVCT_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_AVCT_TRACE_LEVEL +#define CONFIG_AVCT_TRACE_LEVEL_WARNING CONFIG_BT_LOG_AVCT_TRACE_LEVEL_WARNING +#define CONFIG_AVDT_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_AVDT_TRACE_LEVEL +#define CONFIG_AVDT_TRACE_LEVEL_WARNING CONFIG_BT_LOG_AVDT_TRACE_LEVEL_WARNING +#define CONFIG_AVRC_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_AVRC_TRACE_LEVEL +#define CONFIG_AVRC_TRACE_LEVEL_WARNING CONFIG_BT_LOG_AVRC_TRACE_LEVEL_WARNING +#define CONFIG_BLE_ESTABLISH_LINK_CONNECTION_TIMEOUT CONFIG_BT_BLE_ESTAB_LINK_CONN_TOUT +#define CONFIG_BLE_SMP_ENABLE CONFIG_BT_BLE_SMP_ENABLE +#define CONFIG_BLUEDROID_ENABLED CONFIG_BT_BLUEDROID_ENABLED +#define CONFIG_BLUEDROID_PINNED_TO_CORE CONFIG_BT_BLUEDROID_PINNED_TO_CORE +#define CONFIG_BLUEDROID_PINNED_TO_CORE_0 CONFIG_BT_BLUEDROID_PINNED_TO_CORE_0 +#define CONFIG_BLUFI_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_BLUFI_TRACE_LEVEL +#define CONFIG_BLUFI_TRACE_LEVEL_WARNING CONFIG_BT_LOG_BLUFI_TRACE_LEVEL_WARNING +#define CONFIG_BNEP_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_BNEP_TRACE_LEVEL +#define CONFIG_BROWNOUT_DET CONFIG_ESP_BROWNOUT_DET +#define CONFIG_BROWNOUT_DET_LVL CONFIG_ESP_BROWNOUT_DET_LVL +#define CONFIG_BROWNOUT_DET_LVL_SEL_7 CONFIG_ESP_BROWNOUT_DET_LVL_SEL_7 +#define CONFIG_BTC_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_BTC_TRACE_LEVEL +#define CONFIG_BTC_TASK_STACK_SIZE CONFIG_BT_BTC_TASK_STACK_SIZE +#define CONFIG_BTC_TRACE_LEVEL_WARNING CONFIG_BT_LOG_BTC_TRACE_LEVEL_WARNING +#define CONFIG_BTH_LOG_SDP_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_SDP_TRACE_LEVEL +#define CONFIG_BTIF_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_BTIF_TRACE_LEVEL +#define CONFIG_BTIF_TRACE_LEVEL_WARNING CONFIG_BT_LOG_BTIF_TRACE_LEVEL_WARNING +#define CONFIG_BTM_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_BTM_TRACE_LEVEL +#define CONFIG_BTM_TRACE_LEVEL_WARNING CONFIG_BT_LOG_BTM_TRACE_LEVEL_WARNING +#define CONFIG_BTU_TASK_STACK_SIZE CONFIG_BT_BTU_TASK_STACK_SIZE +#define CONFIG_BT_NIMBLE_COEX_PHY_CODED_TX_RX_TLIM_DIS CONFIG_BT_CTRL_COEX_PHY_CODED_TX_RX_TLIM_DIS +#define CONFIG_COMPILER_OPTIMIZATION_LEVEL_RELEASE CONFIG_COMPILER_OPTIMIZATION_SIZE +#define CONFIG_CONSOLE_UART CONFIG_ESP_CONSOLE_UART +#define CONFIG_CONSOLE_UART_BAUDRATE CONFIG_ESP_CONSOLE_UART_BAUDRATE +#define CONFIG_CONSOLE_UART_DEFAULT CONFIG_ESP_CONSOLE_UART_DEFAULT +#define CONFIG_CONSOLE_UART_NUM CONFIG_ESP_CONSOLE_UART_NUM +#define CONFIG_ESP32S3_BROWNOUT_DET CONFIG_ESP_BROWNOUT_DET +#define CONFIG_ESP32S3_BROWNOUT_DET_LVL CONFIG_ESP_BROWNOUT_DET_LVL +#define CONFIG_ESP32S3_BROWNOUT_DET_LVL_SEL_7 CONFIG_ESP_BROWNOUT_DET_LVL_SEL_7 +#define CONFIG_ESP32S3_DEBUG_OCDAWARE CONFIG_ESP_DEBUG_OCDAWARE +#define CONFIG_ESP32S3_DEEP_SLEEP_WAKEUP_DELAY CONFIG_ESP_SLEEP_WAIT_FLASH_READY_EXTRA_DELAY +#define CONFIG_ESP32S3_DEFAULT_CPU_FREQ_160 CONFIG_ESP_DEFAULT_CPU_FREQ_MHZ_160 +#define CONFIG_ESP32S3_RTC_CLK_CAL_CYCLES CONFIG_RTC_CLK_CAL_CYCLES +#define CONFIG_ESP32S3_RTC_CLK_SRC_INT_RC CONFIG_RTC_CLK_SRC_INT_RC +#define CONFIG_ESP32S3_TIME_SYSCALL_USE_RTC_FRC1 CONFIG_NEWLIB_TIME_SYSCALL_USE_RTC_HRT +#define CONFIG_ESP32S3_TIME_SYSCALL_USE_RTC_SYSTIMER CONFIG_NEWLIB_TIME_SYSCALL_USE_RTC_HRT +#define CONFIG_ESP32_APPTRACE_DEST_NONE CONFIG_APPTRACE_DEST_NONE +#define CONFIG_ESP32_APPTRACE_LOCK_ENABLE CONFIG_APPTRACE_LOCK_ENABLE +#define CONFIG_ESP32_DEFAULT_PTHREAD_CORE_NO_AFFINITY CONFIG_PTHREAD_DEFAULT_CORE_NO_AFFINITY +#define CONFIG_ESP32_ENABLE_COREDUMP_TO_NONE CONFIG_ESP_COREDUMP_ENABLE_TO_NONE +#define CONFIG_ESP32_PHY_CALIBRATION_AND_DATA_STORAGE CONFIG_ESP_PHY_CALIBRATION_AND_DATA_STORAGE +#define CONFIG_ESP32_PHY_MAX_TX_POWER CONFIG_ESP_PHY_MAX_TX_POWER +#define CONFIG_ESP32_PHY_MAX_WIFI_TX_POWER CONFIG_ESP_PHY_MAX_WIFI_TX_POWER +#define CONFIG_ESP32_PTHREAD_TASK_CORE_DEFAULT CONFIG_PTHREAD_TASK_CORE_DEFAULT +#define CONFIG_ESP32_PTHREAD_TASK_NAME_DEFAULT CONFIG_PTHREAD_TASK_NAME_DEFAULT +#define CONFIG_ESP32_PTHREAD_TASK_PRIO_DEFAULT CONFIG_PTHREAD_TASK_PRIO_DEFAULT +#define CONFIG_ESP32_PTHREAD_TASK_STACK_SIZE_DEFAULT CONFIG_PTHREAD_TASK_STACK_SIZE_DEFAULT +#define CONFIG_ESP32_WIFI_AMPDU_RX_ENABLED CONFIG_ESP_WIFI_AMPDU_RX_ENABLED +#define CONFIG_ESP32_WIFI_AMPDU_TX_ENABLED CONFIG_ESP_WIFI_AMPDU_TX_ENABLED +#define CONFIG_ESP32_WIFI_DYNAMIC_RX_BUFFER_NUM CONFIG_ESP_WIFI_DYNAMIC_RX_BUFFER_NUM +#define CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER CONFIG_ESP_WIFI_DYNAMIC_TX_BUFFER +#define CONFIG_ESP32_WIFI_DYNAMIC_TX_BUFFER_NUM CONFIG_ESP_WIFI_DYNAMIC_TX_BUFFER_NUM +#define CONFIG_ESP32_WIFI_ENABLED CONFIG_ESP_WIFI_ENABLED +#define CONFIG_ESP32_WIFI_ENABLE_WPA3_SAE CONFIG_ESP_WIFI_ENABLE_WPA3_SAE +#define CONFIG_ESP32_WIFI_IRAM_OPT CONFIG_ESP_WIFI_IRAM_OPT +#define CONFIG_ESP32_WIFI_MGMT_SBUF_NUM CONFIG_ESP_WIFI_MGMT_SBUF_NUM +#define CONFIG_ESP32_WIFI_NVS_ENABLED CONFIG_ESP_WIFI_NVS_ENABLED +#define CONFIG_ESP32_WIFI_RX_BA_WIN CONFIG_ESP_WIFI_RX_BA_WIN +#define CONFIG_ESP32_WIFI_RX_IRAM_OPT CONFIG_ESP_WIFI_RX_IRAM_OPT +#define CONFIG_ESP32_WIFI_SOFTAP_BEACON_MAX_LEN CONFIG_ESP_WIFI_SOFTAP_BEACON_MAX_LEN +#define CONFIG_ESP32_WIFI_STATIC_RX_BUFFER_NUM CONFIG_ESP_WIFI_STATIC_RX_BUFFER_NUM +#define CONFIG_ESP32_WIFI_SW_COEXIST_ENABLE CONFIG_ESP_COEX_SW_COEXIST_ENABLE +#define CONFIG_ESP32_WIFI_TASK_PINNED_TO_CORE_0 CONFIG_ESP_WIFI_TASK_PINNED_TO_CORE_0 +#define CONFIG_ESP32_WIFI_TX_BA_WIN CONFIG_ESP_WIFI_TX_BA_WIN +#define CONFIG_ESP32_WIFI_TX_BUFFER_TYPE CONFIG_ESP_WIFI_TX_BUFFER_TYPE +#define CONFIG_ESP_GRATUITOUS_ARP CONFIG_LWIP_ESP_GRATUITOUS_ARP +#define CONFIG_ESP_SLEEP_DEEP_SLEEP_WAKEUP_DELAY CONFIG_ESP_SLEEP_WAIT_FLASH_READY_EXTRA_DELAY +#define CONFIG_ESP_SYSTEM_PM_POWER_DOWN_CPU CONFIG_PM_POWER_DOWN_CPU_IN_LIGHT_SLEEP +#define CONFIG_ESP_TASK_WDT CONFIG_ESP_TASK_WDT_INIT +#define CONFIG_ESP_WIFI_SW_COEXIST_ENABLE CONFIG_ESP_COEX_SW_COEXIST_ENABLE +#define CONFIG_FLASHMODE_DIO CONFIG_ESPTOOLPY_FLASHMODE_DIO +#define CONFIG_GAP_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_GAP_TRACE_LEVEL +#define CONFIG_GAP_TRACE_LEVEL_WARNING CONFIG_BT_LOG_GAP_TRACE_LEVEL_WARNING +#define CONFIG_GARP_TMR_INTERVAL CONFIG_LWIP_GARP_TMR_INTERVAL +#define CONFIG_GATTC_ENABLE CONFIG_BT_GATTC_ENABLE +#define CONFIG_GATTS_ENABLE CONFIG_BT_GATTS_ENABLE +#define CONFIG_GATTS_SEND_SERVICE_CHANGE_AUTO CONFIG_BT_GATTS_SEND_SERVICE_CHANGE_AUTO +#define CONFIG_GATTS_SEND_SERVICE_CHANGE_MODE CONFIG_BT_GATTS_SEND_SERVICE_CHANGE_MODE +#define CONFIG_GATT_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_GATT_TRACE_LEVEL +#define CONFIG_GATT_TRACE_LEVEL_WARNING CONFIG_BT_LOG_GATT_TRACE_LEVEL_WARNING +#define CONFIG_HCI_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_HCI_TRACE_LEVEL +#define CONFIG_HCI_TRACE_LEVEL_WARNING CONFIG_BT_LOG_HCI_TRACE_LEVEL_WARNING +#define CONFIG_HID_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_HID_TRACE_LEVEL +#define CONFIG_HID_TRACE_LEVEL_WARNING CONFIG_BT_LOG_HID_TRACE_LEVEL_WARNING +#define CONFIG_INT_WDT CONFIG_ESP_INT_WDT +#define CONFIG_INT_WDT_CHECK_CPU1 CONFIG_ESP_INT_WDT_CHECK_CPU1 +#define CONFIG_INT_WDT_TIMEOUT_MS CONFIG_ESP_INT_WDT_TIMEOUT_MS +#define CONFIG_IPC_TASK_STACK_SIZE CONFIG_ESP_IPC_TASK_STACK_SIZE +#define CONFIG_L2CAP_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_L2CAP_TRACE_LEVEL +#define CONFIG_L2CAP_TRACE_LEVEL_WARNING CONFIG_BT_LOG_L2CAP_TRACE_LEVEL_WARNING +#define CONFIG_LOG_BOOTLOADER_LEVEL CONFIG_BOOTLOADER_LOG_LEVEL +#define CONFIG_LOG_BOOTLOADER_LEVEL_INFO CONFIG_BOOTLOADER_LOG_LEVEL_INFO +#define CONFIG_MAIN_TASK_STACK_SIZE CONFIG_ESP_MAIN_TASK_STACK_SIZE +#define CONFIG_MCA_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_MCA_TRACE_LEVEL +#define CONFIG_MCA_TRACE_LEVEL_WARNING CONFIG_BT_LOG_MCA_TRACE_LEVEL_WARNING +#define CONFIG_MONITOR_BAUD CONFIG_ESPTOOLPY_MONITOR_BAUD +#define CONFIG_OPTIMIZATION_ASSERTIONS_ENABLED CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_ENABLE +#define CONFIG_OPTIMIZATION_ASSERTION_LEVEL CONFIG_COMPILER_OPTIMIZATION_ASSERTION_LEVEL +#define CONFIG_OPTIMIZATION_LEVEL_RELEASE CONFIG_COMPILER_OPTIMIZATION_SIZE +#define CONFIG_OSI_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_OSI_TRACE_LEVEL +#define CONFIG_OSI_TRACE_LEVEL_WARNING CONFIG_BT_LOG_OSI_TRACE_LEVEL_WARNING +#define CONFIG_PAN_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_PAN_TRACE_LEVEL +#define CONFIG_PAN_TRACE_LEVEL_WARNING CONFIG_BT_LOG_PAN_TRACE_LEVEL_WARNING +#define CONFIG_POST_EVENTS_FROM_IRAM_ISR CONFIG_ESP_EVENT_POST_FROM_IRAM_ISR +#define CONFIG_POST_EVENTS_FROM_ISR CONFIG_ESP_EVENT_POST_FROM_ISR +#define CONFIG_RFCOMM_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_RFCOMM_TRACE_LEVEL +#define CONFIG_RFCOMM_TRACE_LEVEL_WARNING CONFIG_BT_LOG_RFCOMM_TRACE_LEVEL_WARNING +#define CONFIG_SDP_TRACE_LEVEL_WARNING CONFIG_BT_LOG_SDP_TRACE_LEVEL_WARNING +#define CONFIG_SEMIHOSTFS_MAX_MOUNT_POINTS CONFIG_VFS_SEMIHOSTFS_MAX_MOUNT_POINTS +#define CONFIG_SMP_ENABLE CONFIG_BT_SMP_ENABLE +#define CONFIG_SMP_INITIAL_TRACE_LEVEL CONFIG_BT_LOG_SMP_TRACE_LEVEL +#define CONFIG_SMP_TRACE_LEVEL_WARNING CONFIG_BT_LOG_SMP_TRACE_LEVEL_WARNING +#define CONFIG_SPI_FLASH_WRITING_DANGEROUS_REGIONS_ABORTS CONFIG_SPI_FLASH_DANGEROUS_WRITE_ABORTS +#define CONFIG_STACK_CHECK_NONE CONFIG_COMPILER_STACK_CHECK_MODE_NONE +#define CONFIG_SUPPORT_TERMIOS CONFIG_VFS_SUPPORT_TERMIOS +#define CONFIG_SUPPRESS_SELECT_DEBUG_OUTPUT CONFIG_VFS_SUPPRESS_SELECT_DEBUG_OUTPUT +#define CONFIG_SW_COEXIST_ENABLE CONFIG_ESP_COEX_SW_COEXIST_ENABLE +#define CONFIG_SYSTEM_EVENT_QUEUE_SIZE CONFIG_ESP_SYSTEM_EVENT_QUEUE_SIZE +#define CONFIG_SYSTEM_EVENT_TASK_STACK_SIZE CONFIG_ESP_SYSTEM_EVENT_TASK_STACK_SIZE +#define CONFIG_TASK_WDT CONFIG_ESP_TASK_WDT_INIT +#define CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU0 CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU0 +#define CONFIG_TASK_WDT_CHECK_IDLE_TASK_CPU1 CONFIG_ESP_TASK_WDT_CHECK_IDLE_TASK_CPU1 +#define CONFIG_TASK_WDT_TIMEOUT_S CONFIG_ESP_TASK_WDT_TIMEOUT_S +#define CONFIG_TCPIP_RECVMBOX_SIZE CONFIG_LWIP_TCPIP_RECVMBOX_SIZE +#define CONFIG_TCPIP_TASK_AFFINITY CONFIG_LWIP_TCPIP_TASK_AFFINITY +#define CONFIG_TCPIP_TASK_AFFINITY_NO_AFFINITY CONFIG_LWIP_TCPIP_TASK_AFFINITY_NO_AFFINITY +#define CONFIG_TCPIP_TASK_STACK_SIZE CONFIG_LWIP_TCPIP_TASK_STACK_SIZE +#define CONFIG_TCP_MAXRTX CONFIG_LWIP_TCP_MAXRTX +#define CONFIG_TCP_MSL CONFIG_LWIP_TCP_MSL +#define CONFIG_TCP_MSS CONFIG_LWIP_TCP_MSS +#define CONFIG_TCP_OVERSIZE_MSS CONFIG_LWIP_TCP_OVERSIZE_MSS +#define CONFIG_TCP_QUEUE_OOSEQ CONFIG_LWIP_TCP_QUEUE_OOSEQ +#define CONFIG_TCP_RECVMBOX_SIZE CONFIG_LWIP_TCP_RECVMBOX_SIZE +#define CONFIG_TCP_SND_BUF_DEFAULT CONFIG_LWIP_TCP_SND_BUF_DEFAULT +#define CONFIG_TCP_SYNMAXRTX CONFIG_LWIP_TCP_SYNMAXRTX +#define CONFIG_TCP_WND_DEFAULT CONFIG_LWIP_TCP_WND_DEFAULT +#define CONFIG_TIMER_QUEUE_LENGTH CONFIG_FREERTOS_TIMER_QUEUE_LENGTH +#define CONFIG_TIMER_TASK_PRIORITY CONFIG_FREERTOS_TIMER_TASK_PRIORITY +#define CONFIG_TIMER_TASK_STACK_DEPTH CONFIG_FREERTOS_TIMER_TASK_STACK_DEPTH +#define CONFIG_TIMER_TASK_STACK_SIZE CONFIG_ESP_TIMER_TASK_STACK_SIZE +#define CONFIG_UDP_RECVMBOX_SIZE CONFIG_LWIP_UDP_RECVMBOX_SIZE +#define CONFIG_WPA_MBEDTLS_CRYPTO CONFIG_ESP_WIFI_MBEDTLS_CRYPTO diff --git a/espradio/blobs/headers/esp_coexist.h b/espradio/blobs/headers/esp_coexist.h new file mode 100644 index 000000000..63e83dfcd --- /dev/null +++ b/espradio/blobs/headers/esp_coexist.h @@ -0,0 +1,227 @@ +/* + * SPDX-FileCopyrightText: 2015-2023 Espressif Systems (Shanghai) CO LTD + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#ifndef __ESP_COEXIST_H__ +#define __ESP_COEXIST_H__ + +#include +#include "esp_err.h" +#include "hal/gpio_types.h" + +#ifdef __cplusplus +extern "C" { +#endif + +#define EXTERNAL_COEXIST_WIRE_1 0 +#define EXTERNAL_COEXIST_WIRE_2 1 +#define EXTERNAL_COEXIST_WIRE_3 2 +#define EXTERNAL_COEXIST_WIRE_4 3 +/** + * @brief coex prefer value + */ +typedef enum { + ESP_COEX_PREFER_WIFI = 0, /*!< Prefer to WiFi, WiFi will have more opportunity to use RF */ + ESP_COEX_PREFER_BT, /*!< Prefer to bluetooth, bluetooth will have more opportunity to use RF */ + ESP_COEX_PREFER_BALANCE, /*!< Do balance of WiFi and bluetooth */ + ESP_COEX_PREFER_NUM, /*!< Prefer value numbers */ +} esp_coex_prefer_t; + +typedef enum { + EXTERN_COEX_WIRE_1 = EXTERNAL_COEXIST_WIRE_1, + EXTERN_COEX_WIRE_2 = EXTERNAL_COEXIST_WIRE_2, + EXTERN_COEX_WIRE_3 = EXTERNAL_COEXIST_WIRE_3, + EXTERN_COEX_WIRE_4 = EXTERNAL_COEXIST_WIRE_4, + EXTERN_COEX_WIRE_NUM, +} external_coex_wire_t; + +/** + * @brief coex status type + */ +typedef enum { + ESP_COEX_ST_TYPE_WIFI = 0, + ESP_COEX_ST_TYPE_BLE, + ESP_COEX_ST_TYPE_BT, +} esp_coex_status_type_t; + +#if CONFIG_EXTERNAL_COEX_ENABLE +/** + * @brief external coex gpio pti + */ +typedef struct { + union { + uint32_t in_pin0 __attribute__((deprecated("Use 'request' instead"))); + gpio_num_t request; /**< request gpio signal from follower to leader */ + }; + union { + uint32_t in_pin1 __attribute__((deprecated("Use 'priority' instead"))); + gpio_num_t priority; /**< request gpio signal priority from follower to leader */ + }; + union { + uint32_t out_pin0 __attribute__((deprecated("Use 'grant' instead"))); + gpio_num_t grant; /**< grant gpio signal from leader to follower */ + }; + union { + uint32_t out_pin1 __attribute__((deprecated("Use 'tx_line' instead"))); + gpio_num_t tx_line; /**< tx_line gpio signal from leader to follower, indicates whether the leader's WiFi is transmitting or not*/ + }; +} esp_external_coex_gpio_set_t; + + +/** + * @brief external coex pti level + */ +typedef enum { + EXTERN_COEX_PTI_MID = 0, + EXTERN_COEX_PTI_HIGH, + EXTERN_COEX_PTI_NUM, +} esp_coex_pti_level_t; + +/** + * @brief external coex role + */ +typedef enum { + EXTERNAL_COEX_LEADER_ROLE = 0, + EXTERNAL_COEX_FOLLOWER_ROLE = 2, + EXTERNAL_COEX_UNKNOWN_ROLE, +} esp_extern_coex_work_mode_t; + +/** + * @brief external coex advance setup + */ +typedef struct { + esp_extern_coex_work_mode_t work_mode; + uint8_t delay_us; + bool is_high_valid; +} esp_external_coex_advance_t; +#endif + +#define ESP_COEX_BLE_ST_MESH_CONFIG 0x08 +#define ESP_COEX_BLE_ST_MESH_TRAFFIC 0x10 +#define ESP_COEX_BLE_ST_MESH_STANDBY 0x20 + +#define ESP_COEX_BT_ST_A2DP_STREAMING 0x10 +#define ESP_COEX_BT_ST_A2DP_PAUSED 0x20 + +/** + * @brief Get software coexist version string + * + * @return : version string + */ +const char *esp_coex_version_get(void); + +/** + * @deprecated Use esp_coex_status_bit_set() and esp_coex_status_bit_clear() instead. + * Set coexist preference of performance + * For example, if prefer to bluetooth, then it will make A2DP(play audio via classic bt) + * more smooth while wifi is runnning something. + * If prefer to wifi, it will do similar things as prefer to bluetooth. + * Default, it prefer to balance. + * + * @param prefer : the prefer enumeration value + * @return : ESP_OK - success, other - failed + */ +esp_err_t esp_coex_preference_set(esp_coex_prefer_t prefer); + +/** + * @brief Set coex schm status + * @param type : WIFI/BLE/BT + * @param status : WIFI/BLE/BT STATUS + * @return : ESP_OK - success, other - failed + */ +esp_err_t esp_coex_status_bit_set(esp_coex_status_type_t type, uint32_t status); + +/** + * @brief Clear coex schm status + * @param type : WIFI/BLE/BT + * @param status : WIFI/BLE/BT STATUS + * @return : ESP_OK - success, other - failed + */ +esp_err_t esp_coex_status_bit_clear(esp_coex_status_type_t type, uint32_t status); + +#if CONFIG_EXTERNAL_COEX_ENABLE +/** + * @brief Configure work mode, the default work mode is leader role. + * @param work_mode : work mode. + * @return : ESP_OK - success, other - failed + */ +esp_err_t esp_external_coex_set_work_mode(esp_extern_coex_work_mode_t work_mode); + +/** + * @brief Setup gpio pin and corresponding pti level, start external coex, + * the default work mode is leader role, the default output grant validate pin is high, + * and the default delay output grant value is zero. + * @param wire_type : to select the whole external coex gpio number. + * @param gpio_pin : gpio pin number to choose. + * @return : ESP_OK - success, other - failed + */ +esp_err_t esp_enable_extern_coex_gpio_pin(external_coex_wire_t wire_type, + esp_external_coex_gpio_set_t gpio_pin); + +/** + * @brief Disable external coex. + * @return : ESP_OK - success, other - failed + */ +esp_err_t esp_disable_extern_coex_gpio_pin(); + +#if SOC_EXTERNAL_COEX_ADVANCE +/** + * @brief Configure leader work mode, gpio pin correspondly and finally enable external coex, + * demand not to call the legacy function of `esp_enable_extern_coex_gpio_pin` any more. + * @param wire_type : to select the whole external coex gpio number. + * @param request : request gpio pin number to select. + * @param priority : priority gpio pin number to select. + * @param grant : grant gpio pin number to select. + * @return : ESP_OK - success, other - failed + */ +esp_err_t esp_external_coex_leader_role_set_gpio_pin(external_coex_wire_t wire_type, uint32_t request, uint32_t priority, + uint32_t grant) __attribute__((deprecated("Please use esp_external_coex_set_work_mode and esp_enable_extern_coex_gpio_pin instead"))); + +/** + * @brief Configure follower work mode, gpio pin correspondly and finally enable external coex, + * demand not to call the legacy function of `esp_enable_extern_coex_gpio_pin` any more. + * @param wire_type : to select the whole external coex gpio number. + * @param request : request gpio pin number to select. + * @param priority : priority gpio pin number to select. + * @param grant : grant gpio pin number to select. + * @return : ESP_OK - success, other - failed + */ +esp_err_t esp_external_coex_follower_role_set_gpio_pin(external_coex_wire_t wire_type, uint32_t request, uint32_t priority, + uint32_t grant) __attribute__((deprecated("Please use esp_external_coex_set_work_mode and esp_enable_extern_coex_gpio_pin instead"))); + +/** + * @brief Configure output grant signal latency in delay microseconds only for leader role of external coex, + * demand to call this function before `esp_external_coex_leader_role_set_gpio_pin`, + * if users want to setup output delay value. + * @param delay_us : to setup how many microseconds the output signal performs latency. + * @return : ESP_OK - success, other - failed + */ +esp_err_t esp_external_coex_set_grant_delay(uint8_t delay_us); + +/** + * @brief Configure output grant signal is high validate or not only for leader role of external coex, + * demand to call this function before `esp_external_coex_leader_role_set_gpio_pin`, + * if users want to setup output grant validate pin value. + * @param is_high_valid : to select true means the output grant signal validate is high, other - validate is low. + * @return : ESP_OK - success, other - failed + */ +esp_err_t esp_external_coex_set_validate_high(bool is_high_valid); +#endif /* SOC_EXTERNAL_COEX_ADVANCE */ +#endif /* CONFIG_EXTERNAL_COEX_ENABLE */ + +#if CONFIG_ESP_COEX_SW_COEXIST_ENABLE && CONFIG_SOC_IEEE802154_SUPPORTED +/** + * @brief Enable Wi-Fi and 802.15.4 coexistence. + * @return : ESP_OK - success, other - failed + */ +esp_err_t esp_coex_wifi_i154_enable(void); +#endif + +#ifdef __cplusplus +} +#endif + + +#endif /* __ESP_COEXIST_H__ */ diff --git a/espradio/blobs/headers/esp_coexist_adapter.h b/espradio/blobs/headers/esp_coexist_adapter.h new file mode 100644 index 000000000..539fd3ec6 --- /dev/null +++ b/espradio/blobs/headers/esp_coexist_adapter.h @@ -0,0 +1,64 @@ +/* + * SPDX-FileCopyrightText: 2019-2023 Espressif Systems (Shanghai) CO LTD + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#ifndef __ESP_COEXIST_ADAPTER_H__ +#define __ESP_COEXIST_ADAPTER_H__ + +#include + +#ifdef __cplusplus +extern "C" { +#endif + +#define COEX_ADAPTER_VERSION 0x00000002 +#define COEX_ADAPTER_MAGIC 0xDEADBEAF + +#define COEX_ADAPTER_FUNCS_TIME_BLOCKING 0xffffffff + +typedef struct { + int32_t _version; +#if CONFIG_IDF_TARGET_ESP32 + void *(* _spin_lock_create)(void); + void (* _spin_lock_delete)(void *lock); + uint32_t (*_int_disable)(void *mux); + void (*_int_enable)(void *mux, uint32_t tmp); +#endif + void (*_task_yield_from_isr)(void); + void *(*_semphr_create)(uint32_t max, uint32_t init); + void (*_semphr_delete)(void *semphr); + int32_t (*_semphr_take_from_isr)(void *semphr, void *hptw); + int32_t (*_semphr_give_from_isr)(void *semphr, void *hptw); + int32_t (*_semphr_take)(void *semphr, uint32_t block_time_tick); + int32_t (*_semphr_give)(void *semphr); + int (* _is_in_isr)(void); + void * (* _malloc_internal)(size_t size); + void (* _free)(void *p); + int64_t (* _esp_timer_get_time)(void); + bool (* _env_is_chip)(void); +#if CONFIG_IDF_TARGET_ESP32C2 + // this function is only used on esp32c2 + uint32_t (* _slowclk_cal_get)(void); +#endif + void (* _timer_disarm)(void *timer); + void (* _timer_done)(void *ptimer); + void (* _timer_setfn)(void *ptimer, void *pfunction, void *parg); + void (* _timer_arm_us)(void *ptimer, uint32_t us, bool repeat); + int32_t _magic; +} coex_adapter_funcs_t; + +extern coex_adapter_funcs_t g_coex_adapter_funcs; + +typedef struct { + uint8_t major; + uint8_t minor; + uint8_t patch; +} coex_version_t; + +#ifdef __cplusplus +} +#endif + +#endif /* __ESP_COEXIST_ADAPTER_H__ */ diff --git a/espradio/blobs/headers/esp_coexist_internal.h b/espradio/blobs/headers/esp_coexist_internal.h new file mode 100644 index 000000000..25d12c7fa --- /dev/null +++ b/espradio/blobs/headers/esp_coexist_internal.h @@ -0,0 +1,383 @@ +/* + * SPDX-FileCopyrightText: 2018-2023 Espressif Systems (Shanghai) CO LTD + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#ifndef __ESP_COEXIST_INTERNAL_H__ +#define __ESP_COEXIST_INTERNAL_H__ + +#include +#include "esp_coexist.h" +#include "esp_coexist_adapter.h" + +#ifdef __cplusplus +extern "C" { +#endif + +typedef enum { + COEX_PREFER_WIFI = 0, + COEX_PREFER_BT, + COEX_PREFER_BALANCE, + COEX_PREFER_NUM, +} coex_prefer_t; + +typedef enum { + COEX_SCHM_CALLBACK_TYPE_WIFI = 0, + COEX_SCHM_CALLBACK_TYPE_BT, + COEX_SCHM_CALLBACK_TYPE_I154, +} coex_schm_callback_type_t; + +typedef void (* coex_func_cb_t)(uint32_t event, int sched_cnt); +typedef esp_err_t (* coex_set_lpclk_source_callback_t)(void); +typedef void (* coex_wifi_channel_change_cb_t)(uint8_t primary, uint8_t secondary); + +/** + * @brief Pre-Init software coexist + * extern function for internal use. + * + * @return Init ok or failed. + */ +esp_err_t coex_pre_init(void); + +/** + * @brief Init software coexist + * extern function for internal use. + * + * @return Init ok or failed. + */ +esp_err_t coex_init(void); + +/** + * @brief De-init software coexist + * extern function for internal use. + */ +void coex_deinit(void); + +/** + * @brief Enable software coexist + * extern function for internal use. + * + * @return Enable ok or failed. + */ +esp_err_t coex_enable(void); + +/** + * @brief Disable software coexist + * extern function for internal use. + */ +void coex_disable(void); + +/** + * @brief Get software coexist version string + * extern function for internal use. + * @return : version string + */ +const char *coex_version_get(void); + +/** + * @brief Get software coexist version value + * extern function for internal use. + * @param ptr_version : points to version structure + * @return : ESP_OK - success, other - failed + */ +esp_err_t coex_version_get_value(coex_version_t* ptr_version); + +/** + * @brief Coexist performance preference set from libbt.a + * extern function for internal use. + * + * @param prefer : the prefer enumeration value + * @return : ESP_OK - success, other - failed + */ +esp_err_t coex_preference_set(coex_prefer_t prefer); + +/** + * @brief Get software coexist status. + * @return : software coexist status + */ +uint32_t coex_status_get(void); + +/** + * @brief WiFi requests coexistence. + * + * @param event : WiFi event + * @param latency : WiFi will request coexistence after latency + * @param duration : duration for WiFi to request coexistence + * @return : 0 - success, other - failed + */ +int coex_wifi_request(uint32_t event, uint32_t latency, uint32_t duration); + +/** + * @brief WiFi release coexistence. + * + * @param event : WiFi event + * @return : 0 - success, other - failed + */ +int coex_wifi_release(uint32_t event); + +/** + * @brief Set WiFi channel to coexistence module. + * + * @param primary : WiFi primary channel + * @param secondary : WiFi secondary channel + * @return : 0 - success, other - failed + */ +int coex_wifi_channel_set(uint8_t primary, uint8_t secondary); + +/** + * @brief Get WiFi channel from coexistence module. + * + * @param primary : pointer to value of WiFi primary channel + * @param secondary : pointer to value of WiFi secondary channel + * @return : 0 - success, other - failed + */ +int coex_wifi_channel_get(uint8_t *primary, uint8_t *secondary); + +/** + * @brief Register application callback function to Wi-Fi update low power clock module. + * + * @param callback : Wi-Fi update low power clock callback function + */ +void coex_wifi_register_update_lpclk_callback(coex_set_lpclk_source_callback_t callback); + +/** + * @brief Bluetooth requests coexistence + * + * @param event : Bluetooth event + * @param latency : Bluetooth will request coexistence after latency + * @param duration : duration for Bluetooth to request coexistence + * @return : 0 - success, other - failed + */ +int coex_bt_request(uint32_t event, uint32_t latency, uint32_t duration); + +/** + * @brief Bluetooth release coexistence. + * + * @param event : Bluetooth event + * @return : 0 - success, other - failed + */ +int coex_bt_release(uint32_t event); + +#if CONFIG_IDF_TARGET_ESP32 +/** + * @brief Bluetooth registers callback function to coexistence module + * This function is only used on ESP32. + * + * @param callback: callback function registered to coexistence module + * @return : 0 - success, other - failed + */ +int coex_register_bt_cb(coex_func_cb_t callback); + +/** + * @brief To acquire the spin-lock used in resetting Bluetooth baseband. + * This function is only used to workaround ESP32 hardware issue. + * + * @return : value of the spinlock to be restored + */ +uint32_t coex_bb_reset_lock(void); + +/** + * @brief To release the spin-lock used in resetting Bluetooth baseband. + * This function is only used to workaround ESP32 hardware issue. + * + * @param restore: value of the spinlock returned from previous call of coex_bb_rest_lock + */ +void coex_bb_reset_unlock(uint32_t restore); +#endif /* CONFIG_IDF_TARGET_ESP32 */ + +/** + * @brief Bluetooth registers callback function to receive notification when Wi-Fi channel changes + * + * @param callback: callback function registered to coexistence module + * @return : 0 - success, other - failed + */ +int coex_register_wifi_channel_change_callback(coex_wifi_channel_change_cb_t callback); + +/** + * @brief Update low power clock interval + */ +void coex_update_lpclk_interval(void); + +/** + * @brief Get coexistence event duration. + * + * @param event : Coexistence event + * @param duration: Coexistence event duration + * @return : 0 - success, other - failed + */ +int coex_event_duration_get(uint32_t event, uint32_t *duration); + +#if SOC_COEX_HW_PTI +/** + * @brief Get coexistence event priority. + * + * @param event : Coexistence event + * @param pti: Coexistence event priority + * @return : 0 - success, other - failed + */ +int coex_pti_get(uint32_t event, uint8_t *pti); +#endif + +/** + * @brief Clear coexistence status. + * + * @param type : Coexistence status type + * @param status: Coexistence status + */ +void coex_schm_status_bit_clear(uint32_t type, uint32_t status); + +/** + * @brief Set coexistence status. + * + * @param type : Coexistence status type + * @param status: Coexistence status + */ +void coex_schm_status_bit_set(uint32_t type, uint32_t status); + +/** + * @brief Set coexistence scheme interval. + * + * @param interval : Coexistence scheme interval + * @return : 0 - success, other - failed + */ +int coex_schm_interval_set(uint32_t interval); + +/** + * @brief Get coexistence scheme interval. + * + * @return : Coexistence scheme interval + */ +uint32_t coex_schm_interval_get(void); + +/** + * @brief Get current coexistence scheme period. + * + * @return : Coexistence scheme period + */ +uint8_t coex_schm_curr_period_get(void); + +/** + * @brief Get current coexistence scheme phase. + * + * @return : Coexistence scheme phase + */ +void * coex_schm_curr_phase_get(void); + +/** + * @brief Set current coexistence scheme phase index. + * + * @param idx : Coexistence scheme phase index + * @return : 0 - success, other - failed + */ +int coex_schm_curr_phase_idx_set(int idx); + +/** + * @brief Get current coexistence scheme phase index. + * + * @return : Coexistence scheme phase index + */ +int coex_schm_curr_phase_idx_get(void); + +/** + * @brief Register WiFi callback for coexistence starts. + * + * @param cb : WiFi callback + * @return : 0 - success, other - failed + */ +int coex_register_start_cb(int (* cb)(void)); + +/** + * @brief Restart current coexistence scheme. + * + * @return : 0 - success, other - failed + */ +int coex_schm_process_restart(void); + +/** + * @brief Register callback for coexistence scheme. + * + * @param type : callback type + * @param callback : callback + * @return : 0 - success, other - failed + */ +int coex_schm_register_callback(coex_schm_callback_type_t type, void *callback); + +/** + * @brief Register coexistence adapter functions. + * + * @param funcs : coexistence adapter functions + * @return : ESP_OK - success, other - failed + */ +esp_err_t esp_coex_adapter_register(coex_adapter_funcs_t *funcs); + +#if CONFIG_EXTERNAL_COEX_ENABLE +/** + * @brief Set external coexistence advanced informations, like working mode. + * + * @param out_pti1 This parameter no longer works, will be deprecated and later removed in future releases. + * @param out_pti2 This parameter no longer works, will be deprecated and later removed in future releases. + * + * @return + * - ESP_OK: succeed + */ +esp_err_t esp_coex_external_params(esp_external_coex_advance_t coex_info, uint32_t out_pti1, uint32_t out_pti2); + +/** + * @brief Set external coexistence pti level and enable it. + * + * @param level1 external coex low pti + * @param level2 external coex mid pti + * @param level3 external coex high pti + * + * @return + * - ESP_OK: succeed + */ +esp_err_t esp_coex_external_set(esp_coex_pti_level_t level1, + esp_coex_pti_level_t level2, esp_coex_pti_level_t level3); + +/** + * @brief Disable external coexist + * + * @return + * - ESP_OK: succeed + */ +void esp_coex_external_stop(void); + +/** + * @brief Set external coexistence wire type. + * + * @param wire_type Set external coexistence wire type. + * + */ +void esp_coex_external_set_wire_type(external_coex_wire_t wire_type); + +#if SOC_EXTERNAL_COEX_LEADER_TX_LINE +/** + * @brief Enable external coexist tx line + * + * @param en Enable external coex tx line + * + * @return + * - ESP_OK: succeed + */ +void esp_coex_external_set_txline(bool en); +#endif /*SOC_EXTERNAL_COEX_LEADER_TX_LINE*/ +#endif /*External Coex*/ + +/** + * @brief Check the MD5 values of the coexistence adapter header files in IDF and WiFi library + * + * @attention 1. It is used for internal CI version check + * + * @return + * - ESP_OK : succeed + * - ESP_WIFI_INVALID_ARG : MD5 check fail + */ +esp_err_t esp_coex_adapter_funcs_md5_check(const char *md5); + +#ifdef __cplusplus +} +#endif + +#endif /* __ESP_COEXIST_INTERNAL_H__ */ diff --git a/espradio/blobs/headers/esp_compiler.h b/espradio/blobs/headers/esp_compiler.h new file mode 100644 index 000000000..3e278aa9c --- /dev/null +++ b/espradio/blobs/headers/esp_compiler.h @@ -0,0 +1,54 @@ +/* + * SPDX-FileCopyrightText: 2016-2022 Espressif Systems (Shanghai) CO LTD + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#pragma once + +#include "sdkconfig.h" + +/* + * The likely and unlikely macro pairs: + * These macros are useful to place when application + * knows the majority ocurrence of a decision paths, + * placing one of these macros can hint the compiler + * to reorder instructions producing more optimized + * code. + */ +#if (CONFIG_COMPILER_OPTIMIZATION_PERF) +#ifndef likely +#define likely(x) __builtin_expect(!!(x), 1) +#endif +#ifndef unlikely +#define unlikely(x) __builtin_expect(!!(x), 0) +#endif +#else +#ifndef likely +#define likely(x) (x) +#endif +#ifndef unlikely +#define unlikely(x) (x) +#endif +#endif + +/* + * Utility macros used for designated initializers, which work differently + * in C99 and C++ standards mainly for aggregate types. + * The member separator, comma, is already part of the macro, please omit the trailing comma. + * Usage example: + * struct config_t { char* pchr; char arr[SIZE]; } config = { + * ESP_COMPILER_DESIGNATED_INIT_AGGREGATE_TYPE_EMPTY(pchr) + * ESP_COMPILER_DESIGNATED_INIT_AGGREGATE_TYPE_STR(arr, "Value") + * }; + */ +#if defined(__cplusplus) && __cplusplus >= 202002L +#define ESP_COMPILER_DESIGNATED_INIT_AGGREGATE_TYPE_STR(member, value) .member = value, +#define ESP_COMPILER_DESIGNATED_INIT_AGGREGATE_TYPE_EMPTY(member) .member = { }, +#elif defined(__cplusplus) && __cplusplus < 202002L +#define ESP_COMPILER_DESIGNATED_INIT_AGGREGATE_TYPE_STR(member, value) { .member = value }, +#define ESP_COMPILER_DESIGNATED_INIT_AGGREGATE_TYPE_EMPTY(member) .member = { }, +#else +#define ESP_COMPILER_DESIGNATED_INIT_AGGREGATE_TYPE_STR(member, value) .member = value, +#define ESP_COMPILER_DESIGNATED_INIT_AGGREGATE_TYPE_EMPTY(member) +#endif diff --git a/espradio/blobs/headers/esp_err.h b/espradio/blobs/headers/esp_err.h new file mode 100644 index 000000000..0f234d5d1 --- /dev/null +++ b/espradio/blobs/headers/esp_err.h @@ -0,0 +1,148 @@ +/* + * SPDX-FileCopyrightText: 2015-2021 Espressif Systems (Shanghai) CO LTD + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#pragma once + +#include +#include +#include +#include +#include "esp_compiler.h" + +#ifdef __cplusplus +extern "C" { +#endif + +typedef int esp_err_t; + +/* Definitions for error constants. */ +#define ESP_OK 0 /*!< esp_err_t value indicating success (no error) */ +#define ESP_FAIL -1 /*!< Generic esp_err_t code indicating failure */ + +#define ESP_ERR_NO_MEM 0x101 /*!< Out of memory */ +#define ESP_ERR_INVALID_ARG 0x102 /*!< Invalid argument */ +#define ESP_ERR_INVALID_STATE 0x103 /*!< Invalid state */ +#define ESP_ERR_INVALID_SIZE 0x104 /*!< Invalid size */ +#define ESP_ERR_NOT_FOUND 0x105 /*!< Requested resource not found */ +#define ESP_ERR_NOT_SUPPORTED 0x106 /*!< Operation or feature not supported */ +#define ESP_ERR_TIMEOUT 0x107 /*!< Operation timed out */ +#define ESP_ERR_INVALID_RESPONSE 0x108 /*!< Received response was invalid */ +#define ESP_ERR_INVALID_CRC 0x109 /*!< CRC or checksum was invalid */ +#define ESP_ERR_INVALID_VERSION 0x10A /*!< Version was invalid */ +#define ESP_ERR_INVALID_MAC 0x10B /*!< MAC address was invalid */ +#define ESP_ERR_NOT_FINISHED 0x10C /*!< There are items remained to retrieve */ +#define ESP_ERR_ROC_IN_PROGRESS 0x10E /*!< ROC Operation is in progress */ + + +#define ESP_ERR_WIFI_BASE 0x3000 /*!< Starting number of WiFi error codes */ +#define ESP_ERR_MESH_BASE 0x4000 /*!< Starting number of MESH error codes */ +#define ESP_ERR_FLASH_BASE 0x6000 /*!< Starting number of flash error codes */ +#define ESP_ERR_HW_CRYPTO_BASE 0xc000 /*!< Starting number of HW cryptography module error codes */ +#define ESP_ERR_MEMPROT_BASE 0xd000 /*!< Starting number of Memory Protection API error codes */ + +/** + * @brief Returns string for esp_err_t error codes + * + * This function finds the error code in a pre-generated lookup-table and + * returns its string representation. + * + * The function is generated by the Python script + * tools/gen_esp_err_to_name.py which should be run each time an esp_err_t + * error is modified, created or removed from the IDF project. + * + * @param code esp_err_t error code + * @return string error message + */ +const char *esp_err_to_name(esp_err_t code); + +/** + * @brief Returns string for esp_err_t and system error codes + * + * This function finds the error code in a pre-generated lookup-table of + * esp_err_t errors and returns its string representation. If the error code + * is not found then it is attempted to be found among system errors. + * + * The function is generated by the Python script + * tools/gen_esp_err_to_name.py which should be run each time an esp_err_t + * error is modified, created or removed from the IDF project. + * + * @param code esp_err_t error code + * @param[out] buf buffer where the error message should be written + * @param buflen Size of buffer buf. At most buflen bytes are written into the buf buffer (including the terminating null byte). + * @return buf containing the string error message + */ +const char *esp_err_to_name_r(esp_err_t code, char *buf, size_t buflen); + +/** @cond */ +void _esp_error_check_failed(esp_err_t rc, const char *file, int line, const char *function, const char *expression) __attribute__((__noreturn__)); + +void _esp_error_check_failed_without_abort(esp_err_t rc, const char *file, int line, const char *function, const char *expression); + +#ifndef __ASSERT_FUNC +/* This won't happen on IDF, which defines __ASSERT_FUNC in assert.h, but it does happen when building on the host which + uses /usr/include/assert.h or equivalent. +*/ +#ifdef __ASSERT_FUNCTION +#define __ASSERT_FUNC __ASSERT_FUNCTION /* used in glibc assert.h */ +#else +#define __ASSERT_FUNC "??" +#endif +#endif +/** @endcond */ + +/** + * Macro which can be used to check the error code, + * and terminate the program in case the code is not ESP_OK. + * Prints the error code, error location, and the failed statement to serial output. + * + * Disabled if assertions are disabled. + */ +#ifdef NDEBUG +#define ESP_ERROR_CHECK(x) do { \ + esp_err_t err_rc_ = (x); \ + (void) sizeof(err_rc_); \ + } while(0) +#elif defined(CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_SILENT) +#define ESP_ERROR_CHECK(x) do { \ + esp_err_t err_rc_ = (x); \ + if (unlikely(err_rc_ != ESP_OK)) { \ + abort(); \ + } \ + } while(0) +#else +#define ESP_ERROR_CHECK(x) do { \ + esp_err_t err_rc_ = (x); \ + if (unlikely(err_rc_ != ESP_OK)) { \ + _esp_error_check_failed(err_rc_, __FILE__, __LINE__, \ + __ASSERT_FUNC, #x); \ + } \ + } while(0) +#endif + +/** + * Macro which can be used to check the error code. Prints the error code, error location, and the failed statement to + * serial output. + * In comparison with ESP_ERROR_CHECK(), this prints the same error message but isn't terminating the program. + */ +#if defined NDEBUG || defined CONFIG_COMPILER_OPTIMIZATION_ASSERTIONS_SILENT +#define ESP_ERROR_CHECK_WITHOUT_ABORT(x) ({ \ + esp_err_t err_rc_ = (x); \ + err_rc_; \ + }) +#else +#define ESP_ERROR_CHECK_WITHOUT_ABORT(x) ({ \ + esp_err_t err_rc_ = (x); \ + if (unlikely(err_rc_ != ESP_OK)) { \ + _esp_error_check_failed_without_abort(err_rc_, __FILE__, __LINE__, \ + __ASSERT_FUNC, #x); \ + } \ + err_rc_; \ + }) +#endif //NDEBUG + +#ifdef __cplusplus +} +#endif diff --git a/espradio/blobs/headers/esp_event.h b/espradio/blobs/headers/esp_event.h new file mode 100644 index 000000000..730c45f46 --- /dev/null +++ b/espradio/blobs/headers/esp_event.h @@ -0,0 +1,500 @@ +/* + * SPDX-FileCopyrightText: 2018-2021 Espressif Systems (Shanghai) CO LTD + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#ifndef ESP_EVENT_H_ +#define ESP_EVENT_H_ + +#include "esp_err.h" + + +#include "esp_event_base.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/// Configuration for creating event loops +typedef struct { + int32_t queue_size; /**< size of the event loop queue */ + const char *task_name; /**< name of the event loop task; if NULL, + a dedicated task is not created for event loop*/ + UBaseType_t task_priority; /**< priority of the event loop task, ignored if task name is NULL */ + uint32_t task_stack_size; /**< stack size of the event loop task, ignored if task name is NULL */ + BaseType_t task_core_id; /**< core to which the event loop task is pinned to, + ignored if task name is NULL */ +} esp_event_loop_args_t; + +/** + * @brief Create a new event loop. + * + * @param[in] event_loop_args configuration structure for the event loop to create + * @param[out] event_loop handle to the created event loop + * + * @return + * - ESP_OK: Success + * - ESP_ERR_INVALID_ARG: event_loop_args or event_loop was NULL + * - ESP_ERR_NO_MEM: Cannot allocate memory for event loops list + * - ESP_FAIL: Failed to create task loop + * - Others: Fail + */ +esp_err_t esp_event_loop_create(const esp_event_loop_args_t *event_loop_args, esp_event_loop_handle_t *event_loop); + +/** + * @brief Delete an existing event loop. + * + * @param[in] event_loop event loop to delete, must not be NULL + * + * @return + * - ESP_OK: Success + * - Others: Fail + */ +esp_err_t esp_event_loop_delete(esp_event_loop_handle_t event_loop); + +/** + * @brief Create default event loop + * + * @return + * - ESP_OK: Success + * - ESP_ERR_NO_MEM: Cannot allocate memory for event loops list + * - ESP_ERR_INVALID_STATE: Default event loop has already been created + * - ESP_FAIL: Failed to create task loop + * - Others: Fail + */ +esp_err_t esp_event_loop_create_default(void); + +/** + * @brief Delete the default event loop + * + * @return + * - ESP_OK: Success + * - Others: Fail + */ +esp_err_t esp_event_loop_delete_default(void); + +/** + * @brief Dispatch events posted to an event loop. + * + * This function is used to dispatch events posted to a loop with no dedicated task, i.e. task name was set to NULL + * in event_loop_args argument during loop creation. This function includes an argument to limit the amount of time + * it runs, returning control to the caller when that time expires (or some time afterwards). There is no guarantee + * that a call to this function will exit at exactly the time of expiry. There is also no guarantee that events have + * been dispatched during the call, as the function might have spent all the allotted time waiting on the event queue. + * Once an event has been dequeued, however, it is guaranteed to be dispatched. This guarantee contributes to not being + * able to exit exactly at time of expiry as (1) blocking on internal mutexes is necessary for dispatching the dequeued + * event, and (2) during dispatch of the dequeued event there is no way to control the time occupied by handler code + * execution. The guaranteed time of exit is therefore the allotted time + amount of time required to dispatch + * the last dequeued event. + * + * In cases where waiting on the queue times out, ESP_OK is returned and not ESP_ERR_TIMEOUT, since it is + * normal behavior. + * + * @param[in] event_loop event loop to dispatch posted events from, must not be NULL + * @param[in] ticks_to_run number of ticks to run the loop + * + * @note encountering an unknown event that has been posted to the loop will only generate a warning, not an error. + * + * @return + * - ESP_OK: Success + * - Others: Fail + */ +esp_err_t esp_event_loop_run(esp_event_loop_handle_t event_loop, TickType_t ticks_to_run); + +/** + * @brief Register an event handler to the system event loop (legacy). + * + * This function can be used to register a handler for either: (1) specific events, + * (2) all events of a certain event base, or (3) all events known by the system event loop. + * + * - specific events: specify exact event_base and event_id + * - all events of a certain base: specify exact event_base and use ESP_EVENT_ANY_ID as the event_id + * - all events known by the loop: use ESP_EVENT_ANY_BASE for event_base and ESP_EVENT_ANY_ID as the event_id + * + * Registering multiple handlers to events is possible. Registering a single handler to multiple events is + * also possible. However, registering the same handler to the same event multiple times would cause the + * previous registrations to be overwritten. + * + * @param[in] event_base the base ID of the event to register the handler for + * @param[in] event_id the ID of the event to register the handler for + * @param[in] event_handler the handler function which gets called when the event is dispatched + * @param[in] event_handler_arg data, aside from event data, that is passed to the handler when it is called + * + * @note the event loop library does not maintain a copy of event_handler_arg, therefore the user should + * ensure that event_handler_arg still points to a valid location by the time the handler gets called + * + * @return + * - ESP_OK: Success + * - ESP_ERR_NO_MEM: Cannot allocate memory for the handler + * - ESP_ERR_INVALID_ARG: Invalid combination of event base and event ID + * - Others: Fail + */ +esp_err_t esp_event_handler_register(esp_event_base_t event_base, + int32_t event_id, + esp_event_handler_t event_handler, + void *event_handler_arg); + +/** + * @brief Register an event handler to a specific loop (legacy). + * + * This function behaves in the same manner as esp_event_handler_register, except the additional + * specification of the event loop to register the handler to. + * + * @param[in] event_loop the event loop to register this handler function to, must not be NULL + * @param[in] event_base the base ID of the event to register the handler for + * @param[in] event_id the ID of the event to register the handler for + * @param[in] event_handler the handler function which gets called when the event is dispatched + * @param[in] event_handler_arg data, aside from event data, that is passed to the handler when it is called + * + * @note the event loop library does not maintain a copy of event_handler_arg, therefore the user should + * ensure that event_handler_arg still points to a valid location by the time the handler gets called + * + * @return + * - ESP_OK: Success + * - ESP_ERR_NO_MEM: Cannot allocate memory for the handler + * - ESP_ERR_INVALID_ARG: Invalid combination of event base and event ID + * - Others: Fail + */ +esp_err_t esp_event_handler_register_with(esp_event_loop_handle_t event_loop, + esp_event_base_t event_base, + int32_t event_id, + esp_event_handler_t event_handler, + void *event_handler_arg); + +/** + * @brief Register an instance of event handler to a specific loop. + * + * This function can be used to register a handler for either: (1) specific events, + * (2) all events of a certain event base, or (3) all events known by the system event loop. + * + * - specific events: specify exact event_base and event_id + * - all events of a certain base: specify exact event_base and use ESP_EVENT_ANY_ID as the event_id + * - all events known by the loop: use ESP_EVENT_ANY_BASE for event_base and ESP_EVENT_ANY_ID as the event_id + * + * Besides the error, the function returns an instance object as output parameter to identify each registration. + * This is necessary to remove (unregister) the registration before the event loop is deleted. + * + * Registering multiple handlers to events, registering a single handler to multiple events as well as registering + * the same handler to the same event multiple times is possible. + * Each registration yields a distinct instance object which identifies it over the registration + * lifetime. + * + * @param[in] event_loop the event loop to register this handler function to, must not be NULL + * @param[in] event_base the base ID of the event to register the handler for + * @param[in] event_id the ID of the event to register the handler for + * @param[in] event_handler the handler function which gets called when the event is dispatched + * @param[in] event_handler_arg data, aside from event data, that is passed to the handler when it is called + * @param[out] instance An event handler instance object related to the registered event handler and data, can be NULL. + * This needs to be kept if the specific callback instance should be unregistered before deleting the whole + * event loop. Registering the same event handler multiple times is possible and yields distinct instance + * objects. The data can be the same for all registrations. + * If no unregistration is needed, but the handler should be deleted when the event loop is deleted, + * instance can be NULL. + * + * @note the event loop library does not maintain a copy of event_handler_arg, therefore the user should + * ensure that event_handler_arg still points to a valid location by the time the handler gets called + * + * @return + * - ESP_OK: Success + * - ESP_ERR_NO_MEM: Cannot allocate memory for the handler + * - ESP_ERR_INVALID_ARG: Invalid combination of event base and event ID or instance is NULL + * - Others: Fail + */ +esp_err_t esp_event_handler_instance_register_with(esp_event_loop_handle_t event_loop, + esp_event_base_t event_base, + int32_t event_id, + esp_event_handler_t event_handler, + void *event_handler_arg, + esp_event_handler_instance_t *instance); + +/** + * @brief Register an instance of event handler to the default loop. + * + * This function does the same as esp_event_handler_instance_register_with, except that it registers the + * handler to the default event loop. + * + * @param[in] event_base the base ID of the event to register the handler for + * @param[in] event_id the ID of the event to register the handler for + * @param[in] event_handler the handler function which gets called when the event is dispatched + * @param[in] event_handler_arg data, aside from event data, that is passed to the handler when it is called + * @param[out] instance An event handler instance object related to the registered event handler and data, can be NULL. + * This needs to be kept if the specific callback instance should be unregistered before deleting the whole + * event loop. Registering the same event handler multiple times is possible and yields distinct instance + * objects. The data can be the same for all registrations. + * If no unregistration is needed, but the handler should be deleted when the event loop is deleted, + * instance can be NULL. + * + * @note the event loop library does not maintain a copy of event_handler_arg, therefore the user should + * ensure that event_handler_arg still points to a valid location by the time the handler gets called + * + * @return + * - ESP_OK: Success + * - ESP_ERR_NO_MEM: Cannot allocate memory for the handler + * - ESP_ERR_INVALID_ARG: Invalid combination of event base and event ID or instance is NULL + * - Others: Fail + */ +esp_err_t esp_event_handler_instance_register(esp_event_base_t event_base, + int32_t event_id, + esp_event_handler_t event_handler, + void *event_handler_arg, + esp_event_handler_instance_t *instance); + +/** + * @brief Unregister a handler with the system event loop (legacy). + * + * Unregisters a handler, so it will no longer be called during dispatch. + * Handlers can be unregistered for any combination of event_base and event_id which were previously registered. + * To unregister a handler, the event_base and event_id arguments must match exactly the arguments passed to + * esp_event_handler_register() when that handler was registered. Passing ESP_EVENT_ANY_BASE and/or ESP_EVENT_ANY_ID + * will only unregister handlers that were registered with the same wildcard arguments. + * + * @note When using ESP_EVENT_ANY_ID, handlers registered to specific event IDs using the same base will not be + * unregistered. When using ESP_EVENT_ANY_BASE, events registered to specific bases will also not be + * unregistered. This avoids accidental unregistration of handlers registered by other users or components. + * + * @param[in] event_base the base of the event with which to unregister the handler + * @param[in] event_id the ID of the event with which to unregister the handler + * @param[in] event_handler the handler to unregister + * + * @return ESP_OK success + * @return ESP_ERR_INVALID_ARG invalid combination of event base and event ID + * @return others fail + */ +esp_err_t esp_event_handler_unregister(esp_event_base_t event_base, + int32_t event_id, + esp_event_handler_t event_handler); + +/** + * @brief Unregister a handler from a specific event loop (legacy). + * + * This function behaves in the same manner as esp_event_handler_unregister, except the additional specification of + * the event loop to unregister the handler with. + * + * @param[in] event_loop the event loop with which to unregister this handler function, must not be NULL + * @param[in] event_base the base of the event with which to unregister the handler + * @param[in] event_id the ID of the event with which to unregister the handler + * @param[in] event_handler the handler to unregister + * + * @return + * - ESP_OK: Success + * - ESP_ERR_INVALID_ARG: Invalid combination of event base and event ID + * - Others: Fail + */ +esp_err_t esp_event_handler_unregister_with(esp_event_loop_handle_t event_loop, + esp_event_base_t event_base, + int32_t event_id, + esp_event_handler_t event_handler); + +/** + * @brief Unregister a handler instance from a specific event loop. + * + * Unregisters a handler instance, so it will no longer be called during dispatch. + * Handler instances can be unregistered for any combination of event_base and event_id which were previously + * registered. To unregister a handler instance, the event_base and event_id arguments must match exactly the + * arguments passed to esp_event_handler_instance_register() when that handler instance was registered. + * Passing ESP_EVENT_ANY_BASE and/or ESP_EVENT_ANY_ID will only unregister handler instances that were registered + * with the same wildcard arguments. + * + * @note When using ESP_EVENT_ANY_ID, handlers registered to specific event IDs using the same base will not be + * unregistered. When using ESP_EVENT_ANY_BASE, events registered to specific bases will also not be + * unregistered. This avoids accidental unregistration of handlers registered by other users or components. + * + * @param[in] event_loop the event loop with which to unregister this handler function, must not be NULL + * @param[in] event_base the base of the event with which to unregister the handler + * @param[in] event_id the ID of the event with which to unregister the handler + * @param[in] instance the instance object of the registration to be unregistered + * + * @return + * - ESP_OK: Success + * - ESP_ERR_INVALID_ARG: Invalid combination of event base and event ID + * - Others: Fail + */ +esp_err_t esp_event_handler_instance_unregister_with(esp_event_loop_handle_t event_loop, + esp_event_base_t event_base, + int32_t event_id, + esp_event_handler_instance_t instance); + +/** + * @brief Unregister a handler from the system event loop. + * + * This function does the same as esp_event_handler_instance_unregister_with, except that it unregisters the + * handler instance from the default event loop. + * + * @param[in] event_base the base of the event with which to unregister the handler + * @param[in] event_id the ID of the event with which to unregister the handler + * @param[in] instance the instance object of the registration to be unregistered + * + * @return + * - ESP_OK: Success + * - ESP_ERR_INVALID_ARG: Invalid combination of event base and event ID + * - Others: Fail + */ +esp_err_t esp_event_handler_instance_unregister(esp_event_base_t event_base, + int32_t event_id, + esp_event_handler_instance_t instance); + +/** + * @brief Posts an event to the system default event loop. The event loop library keeps a copy of event_data and manages + * the copy's lifetime automatically (allocation + deletion); this ensures that the data the + * handler receives is always valid. + * + * @param[in] event_base the event base that identifies the event + * @param[in] event_id the event ID that identifies the event + * @param[in] event_data the data, specific to the event occurrence, that gets passed to the handler + * @param[in] event_data_size the size of the event data + * @param[in] ticks_to_wait number of ticks to block on a full event queue + * + * @return + * - ESP_OK: Success + * - ESP_ERR_TIMEOUT: Time to wait for event queue to unblock expired, + * queue full when posting from ISR + * - ESP_ERR_INVALID_ARG: Invalid combination of event base and event ID + * - Others: Fail + */ +esp_err_t esp_event_post(esp_event_base_t event_base, + int32_t event_id, + const void *event_data, + size_t event_data_size, + TickType_t ticks_to_wait); + +/** + * @brief Posts an event to the specified event loop. The event loop library keeps a copy of event_data and manages + * the copy's lifetime automatically (allocation + deletion); this ensures that the data the + * handler receives is always valid. + * + * This function behaves in the same manner as esp_event_post_to, except the additional specification of the event loop + * to post the event to. + * + * @param[in] event_loop the event loop to post to, must not be NULL + * @param[in] event_base the event base that identifies the event + * @param[in] event_id the event ID that identifies the event + * @param[in] event_data the data, specific to the event occurrence, that gets passed to the handler + * @param[in] event_data_size the size of the event data + * @param[in] ticks_to_wait number of ticks to block on a full event queue + * + * @return + * - ESP_OK: Success + * - ESP_ERR_TIMEOUT: Time to wait for event queue to unblock expired, + * queue full when posting from ISR + * - ESP_ERR_INVALID_ARG: Invalid combination of event base and event ID + * - Others: Fail + */ +esp_err_t esp_event_post_to(esp_event_loop_handle_t event_loop, + esp_event_base_t event_base, + int32_t event_id, + const void *event_data, + size_t event_data_size, + TickType_t ticks_to_wait); + +#if CONFIG_ESP_EVENT_POST_FROM_ISR +/** + * @brief Special variant of esp_event_post for posting events from interrupt handlers. + * + * @param[in] event_base the event base that identifies the event + * @param[in] event_id the event ID that identifies the event + * @param[in] event_data the data, specific to the event occurrence, that gets passed to the handler + * @param[in] event_data_size the size of the event data; max is 4 bytes + * @param[out] task_unblocked an optional parameter (can be NULL) which indicates that an event task with + * higher priority than currently running task has been unblocked by the posted event; + * a context switch should be requested before the interrupt is existed. + * + * @note this function is only available when CONFIG_ESP_EVENT_POST_FROM_ISR is enabled + * @note when this function is called from an interrupt handler placed in IRAM, this function should + * be placed in IRAM as well by enabling CONFIG_ESP_EVENT_POST_FROM_IRAM_ISR + * + * @return + * - ESP_OK: Success + * - ESP_FAIL: Event queue for the default event loop full + * - ESP_ERR_INVALID_ARG: Invalid combination of event base and event ID, + * data size of more than 4 bytes + * - Others: Fail + */ +esp_err_t esp_event_isr_post(esp_event_base_t event_base, + int32_t event_id, + const void *event_data, + size_t event_data_size, + BaseType_t *task_unblocked); + +/** + * @brief Special variant of esp_event_post_to for posting events from interrupt handlers + * + * @param[in] event_loop the event loop to post to, must not be NULL + * @param[in] event_base the event base that identifies the event + * @param[in] event_id the event ID that identifies the event + * @param[in] event_data the data, specific to the event occurrence, that gets passed to the handler + * @param[in] event_data_size the size of the event data + * @param[out] task_unblocked an optional parameter (can be NULL) which indicates that an event task with + * higher priority than currently running task has been unblocked by the posted event; + * a context switch should be requested before the interrupt is existed. + * + * @note this function is only available when CONFIG_ESP_EVENT_POST_FROM_ISR is enabled + * @note when this function is called from an interrupt handler placed in IRAM, this function should + * be placed in IRAM as well by enabling CONFIG_ESP_EVENT_POST_FROM_IRAM_ISR + * + * @return + * - ESP_OK: Success + * - ESP_FAIL: Event queue for the loop full + * - ESP_ERR_INVALID_ARG: Invalid combination of event base and event ID, + * data size of more than 4 bytes + * - Others: Fail + */ +esp_err_t esp_event_isr_post_to(esp_event_loop_handle_t event_loop, + esp_event_base_t event_base, + int32_t event_id, + const void *event_data, + size_t event_data_size, + BaseType_t *task_unblocked); +#endif + +/** + * @brief Dumps statistics of all event loops. + * + * Dumps event loop info in the format: + * + @verbatim + event loop + handler + handler + ... + event loop + handler + handler + ... + + where: + + event loop + format: address,name rx:total_received dr:total_dropped + where: + address - memory address of the event loop + name - name of the event loop, 'none' if no dedicated task + total_received - number of successfully posted events + total_dropped - number of events unsuccessfully posted due to queue being full + + handler + format: address ev:base,id inv:total_invoked run:total_runtime + where: + address - address of the handler function + base,id - the event specified by event base and ID this handler executes + total_invoked - number of times this handler has been invoked + total_runtime - total amount of time used for invoking this handler + + @endverbatim + * + * @param[in] file the file stream to output to + * + * @note this function is a noop when CONFIG_ESP_EVENT_LOOP_PROFILING is disabled + * + * @return + * - ESP_OK: Success + * - ESP_ERR_NO_MEM: Cannot allocate memory for event loops list + * - Others: Fail + */ +esp_err_t esp_event_dump(FILE *file); + +#ifdef __cplusplus +} // extern "C" +#endif + +#endif // #ifndef ESP_EVENT_H_ diff --git a/espradio/blobs/headers/esp_event_base.h b/espradio/blobs/headers/esp_event_base.h new file mode 100644 index 000000000..0da0a9915 --- /dev/null +++ b/espradio/blobs/headers/esp_event_base.h @@ -0,0 +1,35 @@ +/* + * SPDX-FileCopyrightText: 2018-2023 Espressif Systems (Shanghai) CO LTD + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#ifndef ESP_EVENT_BASE_H_ +#define ESP_EVENT_BASE_H_ + +#ifdef __cplusplus +extern "C" { +#endif + +// Defines for declaring and defining event base +#define ESP_EVENT_DECLARE_BASE(id) extern esp_event_base_t const id +#define ESP_EVENT_DEFINE_BASE(id) esp_event_base_t const id = #id + +// Event loop library types +typedef const char* esp_event_base_t; /**< unique pointer to a subsystem that exposes events */ +typedef void* esp_event_loop_handle_t; /**< a number that identifies an event with respect to a base */ +typedef void (*esp_event_handler_t)(void* event_handler_arg, + esp_event_base_t event_base, + int32_t event_id, + void* event_data); /**< function called when an event is posted to the queue */ +typedef void* esp_event_handler_instance_t; /**< context identifying an instance of a registered event handler */ + +// Defines for registering/unregistering event handlers +#define ESP_EVENT_ANY_BASE NULL /**< register handler for any event base */ +#define ESP_EVENT_ANY_ID -1 /**< register handler for any event id */ + +#ifdef __cplusplus +} +#endif + +#endif // #ifndef ESP_EVENT_BASE_H_ diff --git a/espradio/blobs/headers/esp_event_legacy.h b/espradio/blobs/headers/esp_event_legacy.h new file mode 100644 index 000000000..660010f88 --- /dev/null +++ b/espradio/blobs/headers/esp_event_legacy.h @@ -0,0 +1,253 @@ +// Copyright 2015-2018 Espressif Systems (Shanghai) PTE LTD +// +// Licensed under the Apache License, Version 2.0 (the "License"); +// you may not use this file except in compliance with the License. +// You may obtain a copy of the License at +// +// http://www.apache.org/licenses/LICENSE-2.0 +// +// Unless required by applicable law or agreed to in writing, software +// distributed under the License is distributed on an "AS IS" BASIS, +// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +// See the License for the specific language governing permissions and +// limitations under the License. + +#pragma once + +#include +#include + +#include "esp_err.h" +#include "esp_wifi_types.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/** System event types enumeration */ +typedef enum { + SYSTEM_EVENT_WIFI_READY = 0, /*!< ESP32 WiFi ready */ + SYSTEM_EVENT_SCAN_DONE, /*!< ESP32 finish scanning AP */ + SYSTEM_EVENT_STA_START, /*!< ESP32 station start */ + SYSTEM_EVENT_STA_STOP, /*!< ESP32 station stop */ + SYSTEM_EVENT_STA_CONNECTED, /*!< ESP32 station connected to AP */ + SYSTEM_EVENT_STA_DISCONNECTED, /*!< ESP32 station disconnected from AP */ + SYSTEM_EVENT_STA_AUTHMODE_CHANGE, /*!< the auth mode of AP connected by ESP32 station changed */ + SYSTEM_EVENT_STA_GOT_IP, /*!< ESP32 station got IP from connected AP */ + SYSTEM_EVENT_STA_LOST_IP, /*!< ESP32 station lost IP and the IP is reset to 0 */ + SYSTEM_EVENT_STA_BSS_RSSI_LOW, /*!< ESP32 station connected BSS rssi goes below threshold */ + SYSTEM_EVENT_STA_WPS_ER_SUCCESS, /*!< ESP32 station wps succeeds in enrollee mode */ + SYSTEM_EVENT_STA_WPS_ER_FAILED, /*!< ESP32 station wps fails in enrollee mode */ + SYSTEM_EVENT_STA_WPS_ER_TIMEOUT, /*!< ESP32 station wps timeout in enrollee mode */ + SYSTEM_EVENT_STA_WPS_ER_PIN, /*!< ESP32 station wps pin code in enrollee mode */ + SYSTEM_EVENT_STA_WPS_ER_PBC_OVERLAP, /*!< ESP32 station wps overlap in enrollee mode */ + SYSTEM_EVENT_AP_START, /*!< ESP32 soft-AP start */ + SYSTEM_EVENT_AP_STOP, /*!< ESP32 soft-AP stop */ + SYSTEM_EVENT_AP_STACONNECTED, /*!< a station connected to ESP32 soft-AP */ + SYSTEM_EVENT_AP_STADISCONNECTED, /*!< a station disconnected from ESP32 soft-AP */ + SYSTEM_EVENT_AP_STAIPASSIGNED, /*!< ESP32 soft-AP assign an IP to a connected station */ + SYSTEM_EVENT_AP_PROBEREQRECVED, /*!< Receive probe request packet in soft-AP interface */ + SYSTEM_EVENT_ACTION_TX_STATUS, /*!< Receive status of Action frame transmitted */ + SYSTEM_EVENT_ROC_DONE, /*!< Indicates the completion of Remain-on-Channel operation status */ + SYSTEM_EVENT_STA_BEACON_TIMEOUT, /*!< ESP32 station beacon timeout */ + SYSTEM_EVENT_FTM_REPORT, /*!< Receive report of FTM procedure */ + SYSTEM_EVENT_GOT_IP6, /*!< ESP32 station or ap or ethernet interface v6IP addr is preferred */ + SYSTEM_EVENT_ETH_START, /*!< ESP32 ethernet start */ + SYSTEM_EVENT_ETH_STOP, /*!< ESP32 ethernet stop */ + SYSTEM_EVENT_ETH_CONNECTED, /*!< ESP32 ethernet phy link up */ + SYSTEM_EVENT_ETH_DISCONNECTED, /*!< ESP32 ethernet phy link down */ + SYSTEM_EVENT_ETH_GOT_IP, /*!< ESP32 ethernet got IP from connected AP */ + SYSTEM_EVENT_MAX /*!< Number of members in this enum */ +} system_event_id_t; + +/* add this macro define for compatible with old IDF version */ +#ifndef SYSTEM_EVENT_AP_STA_GOT_IP6 +#define SYSTEM_EVENT_AP_STA_GOT_IP6 SYSTEM_EVENT_GOT_IP6 +#endif + + +/** Argument structure of SYSTEM_EVENT_STA_WPS_ER_FAILED event */ +typedef wifi_event_sta_wps_fail_reason_t system_event_sta_wps_fail_reason_t; + +/** Argument structure of SYSTEM_EVENT_SCAN_DONE event */ +typedef wifi_event_sta_scan_done_t system_event_sta_scan_done_t; + +/** Argument structure of SYSTEM_EVENT_STA_CONNECTED event */ +typedef wifi_event_sta_connected_t system_event_sta_connected_t; + +/** Argument structure of SYSTEM_EVENT_STA_DISCONNECTED event */ +typedef wifi_event_sta_disconnected_t system_event_sta_disconnected_t; + +/** Argument structure of SYSTEM_EVENT_STA_AUTHMODE_CHANGE event */ +typedef wifi_event_sta_authmode_change_t system_event_sta_authmode_change_t; + +/** Argument structure of SYSTEM_EVENT_STA_WPS_ER_PIN event */ +typedef wifi_event_sta_wps_er_pin_t system_event_sta_wps_er_pin_t; + +/** Argument structure of SYSTEM_EVENT_STA_WPS_ER_PIN event */ +typedef wifi_event_sta_wps_er_success_t system_event_sta_wps_er_success_t; + +/** Argument structure of event */ +typedef wifi_event_ap_staconnected_t system_event_ap_staconnected_t; + +/** Argument structure of event */ +typedef wifi_event_ap_stadisconnected_t system_event_ap_stadisconnected_t; + +/** Argument structure of event */ +typedef wifi_event_ap_probe_req_rx_t system_event_ap_probe_req_rx_t; + +/** Argument structure of SYSTEM_EVENT_FTM_REPORT event */ +typedef wifi_event_ftm_report_t system_event_ftm_report_t; + +/** Argument structure of event */ + +/** Argument structure of event */ + +/** Argument structure of event */ + +/** Union of all possible system_event argument structures */ +typedef union { + system_event_sta_connected_t connected; /*!< ESP32 station connected to AP */ + system_event_sta_disconnected_t disconnected; /*!< ESP32 station disconnected to AP */ + system_event_sta_scan_done_t scan_done; /*!< ESP32 station scan (APs) done */ + system_event_sta_authmode_change_t auth_change; /*!< the auth mode of AP ESP32 station connected to changed */ + system_event_sta_wps_er_pin_t sta_er_pin; /*!< ESP32 station WPS enrollee mode PIN code received */ + system_event_sta_wps_fail_reason_t sta_er_fail_reason; /*!< ESP32 station WPS enrollee mode failed reason code received */ + system_event_sta_wps_er_success_t sta_er_success; /*!< ESP32 station WPS enrollee success */ + system_event_ap_staconnected_t sta_connected; /*!< a station connected to ESP32 soft-AP */ + system_event_ap_stadisconnected_t sta_disconnected; /*!< a station disconnected to ESP32 soft-AP */ + system_event_ap_probe_req_rx_t ap_probereqrecved; /*!< ESP32 soft-AP receive probe request packet */ + system_event_ftm_report_t ftm_report; /*!< Report of FTM procedure */ +} system_event_info_t; + +/** Event, as a tagged enum */ +typedef struct { + system_event_id_t event_id; /*!< event ID */ + system_event_info_t event_info; /*!< event information */ +} system_event_t; + +/** Event handler function type */ +typedef esp_err_t (*system_event_handler_t)(esp_event_base_t event_base, + int32_t event_id, + void* event_data, + size_t event_data_size, + TickType_t ticks_to_wait); + +/** + * @brief Send a event to event task + * + * @note This API is part of the legacy event system. New code should use event library API in esp_event.h + * + * Other task/modules, such as the tcpip_adapter, can call this API to send an event to event task + * + * @param event Event to send + * + * @return ESP_OK : succeed + * @return others : fail + */ +esp_err_t esp_event_send(system_event_t *event) __attribute__ ((deprecated)); + +/** + * @brief Send a event to event task + * + * @note This API is used by WiFi Driver only. + * + * Other task/modules, such as the tcpip_adapter, can call this API to send an event to event task + * + * @param[in] event_base the event base that identifies the event + * @param[in] event_id the event id that identifies the event + * @param[in] event_data the data, specific to the event occurence, that gets passed to the handler + * @param[in] event_data_size the size of the event data + * @param[in] ticks_to_wait number of ticks to block on a full event queue + * + * @return ESP_OK : succeed + * @return others : fail + */ +esp_err_t esp_event_send_internal(esp_event_base_t event_base, + int32_t event_id, + void* event_data, + size_t event_data_size, + TickType_t ticks_to_wait); + +/** + * @brief Default event handler for system events + * + * @note This API is part of the legacy event system. New code should use event library API in esp_event.h + * + * This function performs default handling of system events. + * When using esp_event_loop APIs, it is called automatically before invoking the user-provided + * callback function. + * + * Applications which implement a custom event loop must call this function + * as part of event processing. + * + * @param event pointer to event to be handled + * @return ESP_OK if an event was handled successfully + */ +esp_err_t esp_event_process_default(system_event_t *event) __attribute__ ((deprecated)); + +/** + * @brief Install default event handlers for Ethernet interface + * + * @note This API is part of the legacy event system. New code should use event library API in esp_event.h + * + */ +void esp_event_set_default_eth_handlers(void); + +/** + * @brief Install default event handlers for Wi-Fi interfaces (station and AP) + * + * @note This API is part of the legacy event system. New code should use event library API in esp_event.h + */ +void esp_event_set_default_wifi_handlers(void) __attribute__ ((deprecated)); + +/** + * @brief Application specified event callback function + * + * @note This API is part of the legacy event system. New code should use event library API in esp_event.h + * + * + * @param ctx reserved for user + * @param event event type defined in this file + * + * @return + * - ESP_OK: succeed + * - others: fail + */ +typedef esp_err_t (*system_event_cb_t)(void *ctx, system_event_t *event); + +/** + * @brief Initialize event loop + * + * @note This API is part of the legacy event system. New code should use event library API in esp_event.h + * + * Create the event handler and task + * + * @param cb application specified event callback, it can be modified by call esp_event_set_cb + * @param ctx reserved for user + * + * @return + * - ESP_OK: succeed + * - others: fail + */ +esp_err_t esp_event_loop_init(system_event_cb_t cb, void *ctx) __attribute__ ((deprecated)); + +/** + * @brief Set application specified event callback function + * + * @note This API is part of the legacy event system. New code should use event library API in esp_event.h + * + * @attention 1. If cb is NULL, means application don't need to handle + * If cb is not NULL, it will be call when an event is received, after the default event callback is completed + * + * @param cb application callback function + * @param ctx argument to be passed to callback + * + * + * @return old callback + */ +system_event_cb_t esp_event_loop_set_cb(system_event_cb_t cb, void *ctx) __attribute__ ((deprecated)); + +#ifdef __cplusplus +} +#endif diff --git a/espradio/blobs/headers/esp_interface.h b/espradio/blobs/headers/esp_interface.h new file mode 100644 index 000000000..278825bee --- /dev/null +++ b/espradio/blobs/headers/esp_interface.h @@ -0,0 +1,30 @@ +/* + * SPDX-FileCopyrightText: 2015-2021 Espressif Systems (Shanghai) CO LTD + * + * SPDX-License-Identifier: Apache-2.0 + */ + + +#ifndef __ESP_INTERFACE_H__ +#define __ESP_INTERFACE_H__ + +#include + +#ifdef __cplusplus +extern "C" { +#endif + +typedef enum { + ESP_IF_WIFI_STA = 0, /**< Station interface */ + ESP_IF_WIFI_AP, /**< Soft-AP interface */ + ESP_IF_WIFI_NAN, /**< NAN interface */ + ESP_IF_ETH, /**< Ethernet interface */ + ESP_IF_MAX +} esp_interface_t; + +#ifdef __cplusplus +} +#endif + + +#endif /* __ESP_INTERFACE_TYPES_H__ */ diff --git a/espradio/blobs/headers/esp_phy_init.h b/espradio/blobs/headers/esp_phy_init.h new file mode 100644 index 000000000..27041b4da --- /dev/null +++ b/espradio/blobs/headers/esp_phy_init.h @@ -0,0 +1,286 @@ +/* + * SPDX-FileCopyrightText: 2015-2023 Espressif Systems (Shanghai) CO LTD + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#pragma once +#include +#include +#include "esp_err.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * @file + * init parameters and API + */ + + +/** + * @brief Structure holding PHY init parameters + */ +typedef struct { + uint8_t params[128]; /*!< opaque PHY initialization parameters */ +} esp_phy_init_data_t; + +/** + * @brief PHY enable or disable modem + */ +typedef enum { + PHY_MODEM_WIFI = 1, /*!< PHY modem WIFI */ + PHY_MODEM_BT = 2, /*!< PHY modem BT */ + PHY_MODEM_IEEE802154 = 4, /*!< PHY modem IEEE802154 */ +} esp_phy_modem_t; + +/** + * @brief Opaque PHY calibration data + */ +typedef struct { + uint8_t version[4]; /*!< PHY version */ + uint8_t mac[6]; /*!< The MAC address of the station */ + uint8_t opaque[1894]; /*!< calibration data */ +} esp_phy_calibration_data_t; + +/** + * @brief PHY calibration mode + * + */ +typedef enum { + PHY_RF_CAL_PARTIAL = 0x00000000, /*!< Do part of RF calibration. This should be used after power-on reset. */ + PHY_RF_CAL_NONE = 0x00000001, /*!< Don't do any RF calibration. This mode is only suggested to be used after deep sleep reset. */ + PHY_RF_CAL_FULL = 0x00000002 /*!< Do full RF calibration. Produces best results, but also consumes a lot of time and current. Suggested to be used once. */ +} esp_phy_calibration_mode_t; + +#if CONFIG_ESP_PHY_MULTIPLE_INIT_DATA_BIN +/** + * @brief PHY init data type + */ +typedef enum { + ESP_PHY_INIT_DATA_TYPE_DEFAULT = 0, + ESP_PHY_INIT_DATA_TYPE_SRRC, + ESP_PHY_INIT_DATA_TYPE_FCC, + ESP_PHY_INIT_DATA_TYPE_CE, + ESP_PHY_INIT_DATA_TYPE_NCC, + ESP_PHY_INIT_DATA_TYPE_KCC, + ESP_PHY_INIT_DATA_TYPE_MIC, + ESP_PHY_INIT_DATA_TYPE_IC, + ESP_PHY_INIT_DATA_TYPE_ACMA, + ESP_PHY_INIT_DATA_TYPE_ANATEL, + ESP_PHY_INIT_DATA_TYPE_ISED, + ESP_PHY_INIT_DATA_TYPE_WPC, + ESP_PHY_INIT_DATA_TYPE_OFCA, + ESP_PHY_INIT_DATA_TYPE_IFETEL, + ESP_PHY_INIT_DATA_TYPE_RCM, + ESP_PHY_INIT_DATA_TYPE_NUMBER, +} phy_init_data_type_t; +#endif + +/** + * @brief Get PHY init data + * + * If "Use a partition to store PHY init data" option is set in menuconfig, + * This function will load PHY init data from a partition. Otherwise, + * PHY init data will be compiled into the application itself, and this function + * will return a pointer to PHY init data located in read-only memory (DROM). + * + * If "Use a partition to store PHY init data" option is enabled, this function + * may return NULL if the data loaded from flash is not valid. + * + * @note Call esp_phy_release_init_data to release the pointer obtained using + * this function after the call to esp_wifi_init. + * + * @return pointer to PHY init data structure + */ +const esp_phy_init_data_t* esp_phy_get_init_data(void); + +/** + * @brief Release PHY init data + * @param data pointer to PHY init data structure obtained from + * esp_phy_get_init_data function + */ +void esp_phy_release_init_data(const esp_phy_init_data_t* data); + +/** + * @brief Function called by esp_phy_load_cal_and_init to load PHY calibration data + * + * This is a convenience function which can be used to load PHY calibration + * data from NVS. Data can be stored to NVS using esp_phy_store_cal_data_to_nvs + * function. + * + * If calibration data is not present in the NVS, or + * data is not valid (was obtained for a chip with a different MAC address, + * or obtained for a different version of software), this function will + * return an error. + * + * @param out_cal_data pointer to calibration data structure to be filled with + * loaded data. + * @return ESP_OK on success + */ +esp_err_t esp_phy_load_cal_data_from_nvs(esp_phy_calibration_data_t* out_cal_data); + +/** + * @brief Function called by esp_phy_load_cal_and_init to store PHY calibration data + * + * This is a convenience function which can be used to store PHY calibration + * data to the NVS. Calibration data is returned by esp_phy_load_cal_and_init function. + * Data saved using this function to the NVS can later be loaded using + * esp_phy_store_cal_data_to_nvs function. + * + * @param cal_data pointer to calibration data which has to be saved. + * @return ESP_OK on success + */ +esp_err_t esp_phy_store_cal_data_to_nvs(const esp_phy_calibration_data_t* cal_data); + +/** + * @brief Erase PHY calibration data which is stored in the NVS + * + * This is a function which can be used to trigger full calibration as a last-resort remedy + * if partial calibration is used. It can be called in the application based on some conditions + * (e.g. an option provided in some diagnostic mode). + * + * @return ESP_OK on success + * @return others on fail. Please refer to NVS API return value error number. + */ +esp_err_t esp_phy_erase_cal_data_in_nvs(void); + +/** + * @brief Enable PHY and RF module + * + * PHY and RF module should be enabled in order to use WiFi or BT. + * Now PHY and RF enabling job is done automatically when start WiFi or BT. Users should not + * call this API in their application. + * + * @param modem the modem to call the phy enable. + */ +void esp_phy_enable(esp_phy_modem_t modem); + +/** + * @brief Disable PHY and RF module + * + * PHY module should be disabled in order to shutdown WiFi or BT. + * Now PHY and RF disabling job is done automatically when stop WiFi or BT. Users should not + * call this API in their application. + * + * @param modem the modem to call the phy disable. + */ +void esp_phy_disable(esp_phy_modem_t modem); + +/** + * @brief Enable BTBB module + * + * BTBB module should be enabled in order to use IEEE802154 or BT. + * Now BTBB enabling job is done automatically when start IEEE802154 or BT. Users should not + * call this API in their application. + * + */ +void esp_btbb_enable(void); + +/** + * @brief Disable BTBB module + * + * Dsiable BTBB module, used by IEEE802154 or Bluetooth. + * Users should not call this API in their application. + * + */ +void esp_btbb_disable(void); + +/** + * @brief Load calibration data from NVS and initialize PHY and RF module + */ +void esp_phy_load_cal_and_init(void); + +/** + * @brief Initialize backup memory for Phy power up/down + */ +void esp_phy_modem_init(void); + +/** + * @brief Deinitialize backup memory for Phy power up/down + * Set phy_init_flag if all modems deinit on ESP32C3 + */ +void esp_phy_modem_deinit(void); + +#if CONFIG_MAC_BB_PD +/** + * @brief Initialize backup memory for MAC and Baseband power up/down + */ +void esp_mac_bb_pd_mem_init(void); + +/** + * @brief Deinitialize backup memory for MAC and Baseband power up/down + */ +void esp_mac_bb_pd_mem_deinit(void); + +/** + * @brief Power up MAC and Baseband + */ +void esp_mac_bb_power_up(void); + +/** + * @brief Power down MAC and Baseband + */ +void esp_mac_bb_power_down(void); +#endif + +/** + * @brief Enable WiFi/BT common clock + * + */ +void esp_phy_common_clock_enable(void); + +/** + * @brief Disable WiFi/BT common clock + * + */ +void esp_phy_common_clock_disable(void); + +/** + * @brief Get the time stamp when PHY/RF was switched on + * @return return 0 if PHY/RF is never switched on. Otherwise return time in + * microsecond since boot when phy/rf was last switched on +*/ +int64_t esp_phy_rf_get_on_ts(void); + +/** + * @brief Update the corresponding PHY init type according to the country code of Wi-Fi. + * + * @param country country code + * @return ESP_OK on success. + * @return esp_err_t code describing the error on fail + */ +esp_err_t esp_phy_update_country_info(const char *country); + + +#if CONFIG_ESP_PHY_MULTIPLE_INIT_DATA_BIN +/** + * @brief Apply PHY init bin to PHY + * @return ESP_OK on success. + * @return ESP_FAIL on fail. + */ +esp_err_t esp_phy_apply_phy_init_data(uint8_t *init_data); +#endif + +/** + * @brief Get PHY lib version + * @return PHY lib version. + */ +char * get_phy_version_str(void); + +/** + * @brief Set PHY init parameters + * @param param is 1 means combo module + */ +void phy_init_param_set(uint8_t param); + +/** + * @brief Wi-Fi RX enable + * @param enable True for enable wifi receiving mode as default, false for closing wifi receiving mode as default. + */ +void phy_wifi_enable_set(uint8_t enable); + +#ifdef __cplusplus +} +#endif diff --git a/espradio/blobs/headers/esp_private/esp_wifi_private.h b/espradio/blobs/headers/esp_private/esp_wifi_private.h new file mode 100644 index 000000000..fa8fb1631 --- /dev/null +++ b/espradio/blobs/headers/esp_private/esp_wifi_private.h @@ -0,0 +1,24 @@ +/* + * SPDX-FileCopyrightText: 2019-2022 Espressif Systems (Shanghai) CO LTD + * + * SPDX-License-Identifier: Apache-2.0 + */ +#ifndef _ESP_WIFI_PRIVATE_H +#define _ESP_WIFI_PRIVATE_H + +#include "sys/queue.h" +#include "sdkconfig.h" +#include "esp_wifi_crypto_types.h" +#include "esp_private/wifi_os_adapter.h" + +#ifdef __cplusplus +extern "C" { +#endif + +#define WIFI_OSI_FUNCS_INITIALIZER() &g_wifi_osi_funcs + +#ifdef __cplusplus +} +#endif + +#endif /* _ESP_WIFI_PRIVATE_H */ diff --git a/espradio/blobs/headers/esp_private/esp_wifi_types_private.h b/espradio/blobs/headers/esp_private/esp_wifi_types_private.h new file mode 100644 index 000000000..55c70c77c --- /dev/null +++ b/espradio/blobs/headers/esp_private/esp_wifi_types_private.h @@ -0,0 +1,25 @@ +// Copyright 2019 Espressif Systems (Shanghai) PTE LTD +// +// Licensed under the Apache License, Version 2.0 (the "License"); +// you may not use this file except in compliance with the License. +// You may obtain a copy of the License at + +// http://www.apache.org/licenses/LICENSE-2.0 +// +// Unless required by applicable law or agreed to in writing, software +// distributed under the License is distributed on an "AS IS" BASIS, +// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +// See the License for the specific language governing permissions and +// limitations under the License. + +#ifndef _ESP_WIFI_TYPES_PRIVATE_H +#define _ESP_WIFI_TYPES_PRIVATE_H + +#include +#include +#include "sys/queue.h" +#include "esp_err.h" +#include "esp_interface.h" +#include "esp_event_base.h" + +#endif diff --git a/espradio/blobs/headers/esp_private/wifi.h b/espradio/blobs/headers/esp_private/wifi.h new file mode 100644 index 000000000..40cfecdff --- /dev/null +++ b/espradio/blobs/headers/esp_private/wifi.h @@ -0,0 +1,736 @@ +/* + * SPDX-FileCopyrightText: 2015-2023 Espressif Systems (Shanghai) CO LTD + * + * SPDX-License-Identifier: Apache-2.0 + */ + +/* + * All the APIs declared here are internal only APIs, it can only be used by + * espressif internal modules, such as SSC, LWIP, esp-netif etc, espressif + * customers are not recommended to use them. + * + * If someone really want to use specified APIs declared in here, please contact + * espressif AE/developer to make sure you know the limitations or risk of + * the API, otherwise you may get unexpected behavior!!! + * + */ + + +#ifndef __ESP_WIFI_INTERNAL_H__ +#define __ESP_WIFI_INTERNAL_H__ + +#include +#include +#include "sys/queue.h" +#include "esp_err.h" +#include "esp_wifi_types.h" +#include "esp_event.h" +#include "esp_wifi.h" +#include "esp_smartconfig.h" +#include "wifi_types.h" + +#ifdef __cplusplus +extern "C" { +#endif + +typedef struct { + QueueHandle_t handle; /**< FreeRTOS queue handler */ + void *storage; /**< storage for FreeRTOS queue */ +} wifi_static_queue_t; + +/** + * @brief WiFi log level + * + */ +typedef enum { + WIFI_LOG_NONE = 0, + WIFI_LOG_ERROR , /*enabled by default*/ + WIFI_LOG_WARNING, /*enabled by default*/ + WIFI_LOG_INFO, /*enabled by default*/ + WIFI_LOG_DEBUG, /*can be set in menuconfig*/ + WIFI_LOG_VERBOSE, /*can be set in menuconfig*/ +} wifi_log_level_t; + +/** + * @brief WiFi log module definition + * + */ +typedef enum { + WIFI_LOG_MODULE_ALL = 0, /*all log modules */ + WIFI_LOG_MODULE_WIFI, /*logs related to WiFi*/ + WIFI_LOG_MODULE_COEX, /*logs related to WiFi and BT(or BLE) coexist*/ + WIFI_LOG_MODULE_MESH, /*logs related to Mesh*/ +} wifi_log_module_t; + +/** + * @brief WiFi log submodule definition + * + */ +#define WIFI_LOG_SUBMODULE_ALL (0) /*all log submodules*/ +#define WIFI_LOG_SUBMODULE_INIT (1) /*logs related to initialization*/ +#define WIFI_LOG_SUBMODULE_IOCTL (1<<1) /*logs related to API calling*/ +#define WIFI_LOG_SUBMODULE_CONN (1<<2) /*logs related to connecting*/ +#define WIFI_LOG_SUBMODULE_SCAN (1<<3) /*logs related to scaning*/ + + +/** + * @brief Initialize Wi-Fi Driver + * Alloc resource for WiFi driver, such as WiFi control structure, RX/TX buffer, + * WiFi NVS structure among others. + * + * For the most part, you need not call this function directly. It gets called + * from esp_wifi_init(). + * + * This function may be called, if you only need to initialize the Wi-Fi driver + * without having to use the network stack on top. + * + * @param config provide WiFi init configuration + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_NO_MEM: out of memory + * - others: refer to error code esp_err.h + */ +esp_err_t esp_wifi_init_internal(const wifi_init_config_t *config); + +/** + * @brief Deinitialize Wi-Fi Driver + * Free resource for WiFi driver, such as WiFi control structure, RX/TX buffer, + * WiFi NVS structure among others. + * + * For the most part, you need not call this function directly. It gets called + * from esp_wifi_deinit(). + * + * This function may be called, if you call esp_wifi_init_internal to initialize + * WiFi driver. + * + * @return + * - ESP_OK: succeed + * - others: refer to error code esp_err.h + */ +esp_err_t esp_wifi_deinit_internal(void); + +/** + * @brief free the rx buffer which allocated by wifi driver + * + * @param void* buffer: rx buffer pointer + */ +void esp_wifi_internal_free_rx_buffer(void* buffer); + +/** + * @brief transmit the buffer via wifi driver + * + * This API makes a copy of the input buffer and then forwards the buffer + * copy to WiFi driver. + * + * @param wifi_interface_t wifi_if : wifi interface id + * @param void *buffer : the buffer to be transmit + * @param uint16_t len : the length of buffer + * + * @return + * - ESP_OK : Successfully transmit the buffer to wifi driver + * - ESP_ERR_NO_MEM: out of memory + * - ESP_ERR_INVALID_ARG: invalid argument + * - ESP_ERR_WIFI_IF : WiFi interface is invalid + * - ESP_ERR_WIFI_CONN : WiFi interface is not created, e.g. send the data to STA while WiFi mode is AP mode + * - ESP_ERR_WIFI_NOT_STARTED : WiFi is not started + * - ESP_ERR_WIFI_STATE : WiFi internal state is not ready, e.g. WiFi is not started + * - ESP_ERR_WIFI_NOT_ASSOC : WiFi is not associated + * - ESP_ERR_WIFI_TX_DISALLOW : WiFi TX is disallowed, e.g. WiFi hasn't pass the authentication + * - ESP_ERR_WIFI_POST : caller fails to post event to WiFi task + */ +int esp_wifi_internal_tx(wifi_interface_t wifi_if, void *buffer, uint16_t len); + +/** + * @brief The net stack buffer reference counter callback function + * + */ +typedef void (*wifi_netstack_buf_ref_cb_t)(void *netstack_buf); + +/** + * @brief The net stack buffer free callback function + * + */ +typedef void (*wifi_netstack_buf_free_cb_t)(void *netstack_buf); + +/** + * @brief transmit the buffer by reference via wifi driver + * + * This API firstly increases the reference counter of the input buffer and + * then forwards the buffer to WiFi driver. The WiFi driver will free the buffer + * after processing it. Use esp_wifi_internal_tx() if the uplayer buffer doesn't + * supports reference counter. + * + * @param wifi_if : wifi interface id + * @param buffer : the buffer to be tansmit + * @param len : the length of buffer + * @param netstack_buf : the netstack buffer related to bufffer + * + * @return + * - ESP_OK : Successfully transmit the buffer to wifi driver + * - ESP_ERR_NO_MEM: out of memory + * - ESP_ERR_INVALID_ARG: invalid argument + * - ESP_ERR_WIFI_IF : WiFi interface is invalid + * - ESP_ERR_WIFI_CONN : WiFi interface is not created, e.g. send the data to STA while WiFi mode is AP mode + * - ESP_ERR_WIFI_NOT_STARTED : WiFi is not started + * - ESP_ERR_WIFI_STATE : WiFi internal state is not ready, e.g. WiFi is not started + * - ESP_ERR_WIFI_NOT_ASSOC : WiFi is not associated + * - ESP_ERR_WIFI_TX_DISALLOW : WiFi TX is disallowed, e.g. WiFi hasn't pass the authentication + * - ESP_ERR_WIFI_POST : caller fails to post event to WiFi task + */ +esp_err_t esp_wifi_internal_tx_by_ref(wifi_interface_t ifx, void *buffer, size_t len, void *netstack_buf); + +/** + * @brief Initialize WAPI function when wpa_supplicant initialize. + * + * This API is privately used, be careful not open to external applicantion. + * + * @return + * - ESP_OK : succeed + * - ESP_ERR_WAPI_INTERNAL : Internal error + */ +esp_err_t esp_wifi_internal_wapi_init(void); + +/** + * @brief De-initialize WAPI function when wpa_supplicant de-initialize. + * + * This API is privately used, be careful not open to external applicantion. + * + * @return + * - ESP_OK : succeed + */ +esp_err_t esp_wifi_internal_wapi_deinit(void); + +/** + * @brief register the net stack buffer reference increasing and free callback + * + * @param ref : net stack buffer reference callback + * @param free: net stack buffer free callback + * + * @return + * - ESP_OK : Successfully transmit the buffer to wifi driver + * - others : failed to register the callback + */ +esp_err_t esp_wifi_internal_reg_netstack_buf_cb(wifi_netstack_buf_ref_cb_t ref, wifi_netstack_buf_free_cb_t free); + + +/** + * @brief The WiFi RX callback function + * + * Each time the WiFi need to forward the packets to high layer, the callback function will be called + */ +typedef esp_err_t (*wifi_rxcb_t)(void *buffer, uint16_t len, void *eb); + +/** + * @brief Set the WiFi RX callback + * + * @attention 1. Currently we support only one RX callback for each interface + * + * @param wifi_interface_t ifx : interface + * @param wifi_rxcb_t fn : WiFi RX callback + * + * @return + * - ESP_OK : succeed + * - others : fail + */ +esp_err_t esp_wifi_internal_reg_rxcb(wifi_interface_t ifx, wifi_rxcb_t fn); + +/** + * @brief Notify WIFI driver that the station got ip successfully + * + * @return + * - ESP_OK : succeed + * - others : fail + */ +esp_err_t esp_wifi_internal_set_sta_ip(void); + +/** + * @brief enable or disable transmitting WiFi MAC frame with fixed rate + * + * @attention 1. If fixed rate is enabled, both management and data frame are transmitted with fixed rate + * @attention 2. Make sure that the receiver is able to receive the frame with the fixed rate if you want the frame to be received + * @attention 3. Not support to set fix rate for espnow and 80211_tx + * + * @param ifx : wifi interface + * @param en : false - disable, true - enable + * @param rate : PHY rate + * + * @return + * - ERR_OK : succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + * - ESP_ERR_WIFI_NOT_STARTED: WiFi was not started by esp_wifi_start + * - ESP_ERR_WIFI_IF : invalid WiFi interface + * - ESP_ERR_INVALID_ARG : invalid rate + * - ESP_ERR_NOT_SUPPORTED : do not support to set fixed rate if TX AMPDU is enabled + */ +esp_err_t esp_wifi_internal_set_fix_rate(wifi_interface_t ifx, bool en, wifi_phy_rate_t rate); + +/** + * @brief Start SmartConfig, config ESP device to connect AP. You need to broadcast information by phone APP. + * Device sniffer special packets from the air that containing SSID and password of target AP. + * + * @attention 1. This API can be called in station or softAP-station mode. + * @attention 2. Can not call esp_smartconfig_start twice before it finish, please call + * esp_smartconfig_stop first. + * + * @param config pointer to smartconfig start configure structure + * + * @return + * - ESP_OK: succeed + * - others: fail + */ +esp_err_t esp_smartconfig_internal_start(const smartconfig_start_config_t *config); + +/** + * @brief Stop SmartConfig, free the buffer taken by esp_smartconfig_start. + * + * @attention Whether connect to AP succeed or not, this API should be called to free + * memory taken by smartconfig_start. + * + * @return + * - ESP_OK: succeed + * - others: fail + */ +esp_err_t esp_smartconfig_internal_stop(void); + +/** + * @brief Check the MD5 values of the OS adapter header files in IDF and WiFi library + * + * @attention 1. It is used for internal CI version check + * + * @return + * - ESP_OK : succeed + * - ESP_WIFI_INVALID_ARG : MD5 check fail + */ +esp_err_t esp_wifi_internal_osi_funcs_md5_check(const char *md5); + +/** + * @brief Check the MD5 values of the crypto types header files in IDF and WiFi library + * + * @attention 1. It is used for internal CI version check + * + * @return + * - ESP_OK : succeed + * - ESP_WIFI_INVALID_ARG : MD5 check fail + */ +esp_err_t esp_wifi_internal_crypto_funcs_md5_check(const char *md5); + +/** + * @brief Check the MD5 values of the esp_wifi_types.h in IDF and WiFi library + * + * @attention 1. It is used for internal CI version check + * + * @return + * - ESP_OK : succeed + * - ESP_WIFI_INVALID_ARG : MD5 check fail + */ +esp_err_t esp_wifi_internal_wifi_type_md5_check(const char *md5); + +/** + * @brief Check the MD5 values of the esp_wifi_he_types.h in IDF and WiFi library + * + * @attention 1. It is used for internal CI version check + * + * @return + * - ESP_OK : succeed + * - ESP_WIFI_INVALID_ARG : MD5 check fail + */ +esp_err_t esp_wifi_internal_wifi_he_type_md5_check(const char *md5); + +/** + * @brief Check the MD5 values of the esp_wifi.h in IDF and WiFi library + * + * @attention 1. It is used for internal CI version check + * + * @return + * - ESP_OK : succeed + * - ESP_WIFI_INVALID_ARG : MD5 check fail + */ +esp_err_t esp_wifi_internal_esp_wifi_md5_check(const char *md5); + +/** + * @brief Check the MD5 values of the esp_wifi_he.h in IDF and WiFi library + * + * @attention 1. It is used for internal CI version check + * + * @return + * - ESP_OK : succeed + * - ESP_WIFI_INVALID_ARG : MD5 check fail + */ +esp_err_t esp_wifi_internal_esp_wifi_he_md5_check(const char *md5); + +/** + * @brief Allocate a chunk of memory for WiFi driver + * + * @attention This API is not used for DMA memory allocation. + * + * @param size_t size : Size, in bytes, of the amount of memory to allocate + * + * @return A pointer to the memory allocated on success, NULL on failure + */ +void *wifi_malloc( size_t size ); + +/** + * @brief Reallocate a chunk of memory for WiFi driver + * + * @attention This API is not used for DMA memory allocation. + * + * @param void * ptr : Pointer to previously allocated memory, or NULL for a new allocation. + * @param size_t size : Size, in bytes, of the amount of memory to allocate + * + * @return A pointer to the memory allocated on success, NULL on failure + */ +void *wifi_realloc( void *ptr, size_t size ); + +/** + * @brief Callocate memory for WiFi driver + * + * @attention This API is not used for DMA memory allocation. + * + * @param size_t n : Number of continuing chunks of memory to allocate + * @param size_t size : Size, in bytes, of the amount of memory to allocate + * + * @return A pointer to the memory allocated on success, NULL on failure + */ +void *wifi_calloc( size_t n, size_t size ); + +/** + * @brief Update WiFi MAC time + * + * @param uint32_t time_delta : time duration since the WiFi/BT common clock is disabled + * + * @return Always returns ESP_OK + */ +typedef esp_err_t (* wifi_mac_time_update_cb_t)( uint32_t time_delta ); + +/** + * @brief Update WiFi MAC time + * + * @param uint32_t time_delta : time duration since the WiFi/BT common clock is disabled + * + * @return Always returns ESP_OK + */ +esp_err_t esp_wifi_internal_update_mac_time( uint32_t time_delta ); + +/** + * @brief Set current WiFi log level + * + * @param level Log level. + * + * @return + * - ESP_OK: succeed + * - ESP_FAIL: level is invalid + */ +esp_err_t esp_wifi_internal_set_log_level(wifi_log_level_t level); + +/** + * @brief Set current log module and submodule + * + * @param module Log module + * @param submodule Log submodule + * @param enable enable or disable + * If module == 0 && enable == 0, all log modules are disabled. + * If module == 0 && enable == 1, all log modules are enabled. + * If submodule == 0 && enable == 0, all log submodules are disabled. + * If submodule == 0 && enable == 1, all log submodules are enabled. + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + * - ESP_ERR_INVALID_ARG: invalid argument + */ +esp_err_t esp_wifi_internal_set_log_mod(wifi_log_module_t module, uint32_t submodule, bool enable); + +/** + * @brief Get current WiFi log info + * + * @param log_level the return log level. + * @param log_mod the return log module and submodule + * + * @return + * - ESP_OK: succeed + */ +esp_err_t esp_wifi_internal_get_log(wifi_log_level_t *log_level, uint32_t *log_mod); + +/** + * @brief A general API to set/get WiFi internal configuration, it's for debug only + * + * @param cmd : ioctl command type + * @param cfg : configuration for the command + * + * @return + * - ESP_OK: succeed + * - others: failed + */ +esp_err_t esp_wifi_internal_ioctl(int cmd, wifi_ioctl_config_t *cfg); + +/** + * @brief Get the user-configured channel info + * + * @param ifx : WiFi interface + * @param primary : store the configured primary channel + * @param second : store the configured second channel + * + * @return + * - ESP_OK: succeed + */ +esp_err_t esp_wifi_internal_get_config_channel(wifi_interface_t ifx, uint8_t *primary, uint8_t *second); + +/** + * @brief Get the negotiated channel info after WiFi connection established + * + * @param ifx : WiFi interface + * @param aid : the connection number when a STA connects to the softAP + * @param primary : store the negotiated primary channel + * @param second : store the negotiated second channel + * @attention the aid param is only works when the device in softAP/softAP+STA mode + * + * @return + * - ESP_OK: succeed + */ +esp_err_t esp_wifi_internal_get_negotiated_channel(wifi_interface_t ifx, uint8_t aid, uint8_t *primary, uint8_t *second); + +/** + * @brief Get the negotiated bandwidth info after WiFi connection established + * + * @param ifx : WiFi interface + * @param bw : store the negotiated bandwidth + * + * @return + * - ESP_OK: succeed + */ +esp_err_t esp_wifi_internal_get_negotiated_bandwidth(wifi_interface_t ifx, uint8_t aid, uint8_t *bw); + +#if SOC_WIFI_HW_TSF +/** + * @brief Check if WiFi TSF is active + * + * @return + * - true: Active + * - false: Not active + */ +bool esp_wifi_internal_is_tsf_active(void); + +/** + * @brief Update WIFI light sleep wake ahead time + * + */ +void esp_wifi_internal_update_light_sleep_wake_ahead_time(uint32_t); + +/** + * @brief Update WiFi TSF tick interval + * + * @return + * - true: Active + * - false: Not active + */ +esp_err_t esp_wifi_update_tsf_tick_interval(void); +#endif + +/** + * @brief Wifi power domain power on + */ +void esp_wifi_power_domain_on(void); + +/** + * @brief Wifi power domain power off + */ +void esp_wifi_power_domain_off(void); + +#if CONFIG_MAC_BB_PD +/** + * @brief Enable or disable powering down MAC and baseband when Wi-Fi is sleeping. + * + * @param enable : enable or disable + * + * @return + * - ESP_OK: succeed + */ +esp_err_t esp_wifi_internal_set_mac_sleep(bool enable); + +/** + * @brief mac bb sleep. + */ +void pm_mac_sleep(void); + +/** + * @brief mac bb wakeup. + */ +void pm_mac_wakeup(void); +#endif + +/** + * @breif TxDone callback function type. Should be registered using esp_wifi_set_tx_done_cb() + * + * @param ifidx The interface id that the tx callback has been triggered from + * @param data Pointer to the data transmitted + * @param data_len Length of the data transmitted + * @param txStatus True:if the data was transmitted sucessfully False: if data transmission failed + */ +typedef void (* wifi_tx_done_cb_t)(uint8_t ifidx, uint8_t *data, uint16_t *data_len, bool txStatus); + +/** + * @brief Register the txDone callback function of type wifi_tx_done_cb_t + * + * @param cb The callback function + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + * - ESP_ERR_WIFI_NOT_STARTED: WiFi is not started by esp_wifi_start + */ +esp_err_t esp_wifi_set_tx_done_cb(wifi_tx_done_cb_t cb); + +/** + * @brief Set device spp amsdu attributes + * + * @param ifx: WiFi interface + * @param spp_cap: spp amsdu capable + * @param spp_req: spp amsdu require + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + * - ESP_ERR_WIFI_IF : invalid WiFi interface + */ +esp_err_t esp_wifi_internal_set_spp_amsdu(wifi_interface_t ifidx, bool spp_cap, bool spp_req); + +/** + * @brief Update WIFI light sleep default parameters + * + * @param min_freq_mhz: minimum frequency of DFS + * @param max_freq_mhz: maximum frequency of DFS + */ +void esp_wifi_internal_update_light_sleep_default_params(int min_freq_mhz, int max_freq_mhz); + +/** + * @brief Set the delay time for wifi to enter the sleep state when light sleep + * + * @param return_to_sleep_delay: minimum timeout time for waiting to receive + * data, when no data is received during the timeout period, + * the wifi enters the sleep process. + */ +void esp_wifi_set_sleep_delay_time(uint32_t return_to_sleep_delay); + +/** + * @brief Set wifi keep alive time + * + * @param keep_alive_time: keep alive time + */ +void esp_wifi_set_keep_alive_time(uint32_t keep_alive_time); + +/** + * @brief Configure wifi beacon montior default parameters + * + * @param config: the configuration parameters for wifi beacon monitor + */ +void esp_wifi_beacon_monitor_configure(wifi_beacon_monitor_config_t *config); + +/** + * @brief Set modem state mode to require WiFi to enable or disable Advanced DTIM sleep function + * + * @param require_modem_state: true for require WiFi to enable Advanced DTIM sleep function, + * false for require WiFi to disable Advanced DTIM sleep function. + * @return + * - ESP_OK: succeed + */ +void esp_wifi_internal_modem_state_configure(bool require_modem_state); + +/** + * @brief Set light sleep mode to require WiFi to enable or disable Advanced DTIM sleep function + * + * @param light_sleep_enable: true for light sleep mode is enabled, false for light sleep mode is disabled. + * @return + * - ESP_OK: succeed + */ +void esp_wifi_internal_light_sleep_configure(bool light_sleep_enable); + +/** + * @brief Start Publishing a service in the NAN cluster + * + * @attention This API should be called after esp_wifi_start() in NAN Mode. + * + * @param publish_cfg Configuration parameters for publishing a service. + * @param id Identifier for the Publish service. + * @param cancel Cancel the service identified by the id. + * + * @return + * - ESP_OK: succeed + * - others: failed + */ +esp_err_t esp_nan_internal_publish_service(const wifi_nan_publish_cfg_t *publish_cfg, + uint8_t *id, bool cancel); + +/** + * @brief Subscribe for a service within the NAN cluster + * + * @attention This API should be called after esp_wifi_start() in NAN Mode. + * + * @param subscribe_cfg Configuration parameters for subscribing for a service. + * @param id Identifier for the Subscribe service. + * @param cancel Cancel the service identified by the id. + * + * @return + * - ESP_OK: succeed + * - others: failed + */ +esp_err_t esp_nan_internal_subscribe_service(const wifi_nan_subscribe_cfg_t *subscribe_cfg, + uint8_t *id, bool cancel); + +/** + * @brief Send Follow-up to the Publisher with matching service + * + * @attention This API should be called after WIFI_EVENT_NAN_SVC_MATCH event is received. + * + * @param fup_params Configuration parameters for sending a Follow-up to the Peer. + * + * @return + * - ESP_OK: succeed + * - others: failed + */ +esp_err_t esp_nan_internal_send_followup(const wifi_nan_followup_params_t *fup_params); + +/** + * @brief Send Datapath Request to the Publisher with matching service + * + * @attention This API should be called after WIFI_EVENT_NAN_SVC_MATCH event is received. + * + * @param req NAN Datapath Request parameters. + * + * @return + * - ESP_OK: succeed + * - others: failed + */ +esp_err_t esp_nan_internal_datapath_req(wifi_nan_datapath_req_t *req, uint8_t *ndp_id); + +/** + * @brief Send Datapath Response to accept or reject the received request + * + * @attention This API should be called on the Publisher after receiving WIFI_EVENT_NDP_INDICATION event. + * + * @param resp NAN Datapath Response parameters. + * + * @return + * - ESP_OK: succeed + * - others: failed + */ +esp_err_t esp_nan_internal_datapath_resp(wifi_nan_datapath_resp_t *resp); + +/** + * @brief End NAN Datapath that is active + * + * @attention This API should be called after receiving WIFI_EVENT_NDP_CONFIRM event. + * + * @param req NAN Datapath end request parameters. + * + * @return + * - ESP_OK: succeed + * - others: failed + */ +esp_err_t esp_nan_internal_datapath_end(wifi_nan_datapath_end_req_t *req); + +#ifdef __cplusplus +} +#endif + +#endif /* __ESP_WIFI_H__ */ diff --git a/espradio/blobs/headers/esp_private/wifi_os_adapter.h b/espradio/blobs/headers/esp_private/wifi_os_adapter.h new file mode 100644 index 000000000..84ace9fd1 --- /dev/null +++ b/espradio/blobs/headers/esp_private/wifi_os_adapter.h @@ -0,0 +1,167 @@ +/* + * SPDX-FileCopyrightText: 2018-2021 Espressif Systems (Shanghai) CO LTD + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#ifndef ESP_WIFI_OS_ADAPTER_H_ +#define ESP_WIFI_OS_ADAPTER_H_ + +#include +#include +#include +#include +#include "sdkconfig.h" + +#ifdef __cplusplus +extern "C" { +#endif + +#define ESP_WIFI_OS_ADAPTER_VERSION 0x00000008 +#define ESP_WIFI_OS_ADAPTER_MAGIC 0xDEADBEAF + +#define OSI_FUNCS_TIME_BLOCKING 0xffffffff + +#define OSI_QUEUE_SEND_FRONT 0 +#define OSI_QUEUE_SEND_BACK 1 +#define OSI_QUEUE_SEND_OVERWRITE 2 + +typedef struct { + int32_t _version; + bool (* _env_is_chip)(void); + void (*_set_intr)(int32_t cpu_no, uint32_t intr_source, uint32_t intr_num, int32_t intr_prio); + void (*_clear_intr)(uint32_t intr_source, uint32_t intr_num); + void (*_set_isr)(int32_t n, void *f, void *arg); + void (*_ints_on)(uint32_t mask); + void (*_ints_off)(uint32_t mask); + bool (* _is_from_isr)(void); + void *(* _spin_lock_create)(void); + void (* _spin_lock_delete)(void *lock); + uint32_t (*_wifi_int_disable)(void *wifi_int_mux); + void (*_wifi_int_restore)(void *wifi_int_mux, uint32_t tmp); + void (*_task_yield_from_isr)(void); + void *(*_semphr_create)(uint32_t max, uint32_t init); + void (*_semphr_delete)(void *semphr); + int32_t (*_semphr_take)(void *semphr, uint32_t block_time_tick); + int32_t (*_semphr_give)(void *semphr); + void *(*_wifi_thread_semphr_get)(void); + void *(*_mutex_create)(void); + void *(*_recursive_mutex_create)(void); + void (*_mutex_delete)(void *mutex); + int32_t (*_mutex_lock)(void *mutex); + int32_t (*_mutex_unlock)(void *mutex); + void *(* _queue_create)(uint32_t queue_len, uint32_t item_size); + void (* _queue_delete)(void *queue); + int32_t (* _queue_send)(void *queue, void *item, uint32_t block_time_tick); + int32_t (* _queue_send_from_isr)(void *queue, void *item, void *hptw); + int32_t (* _queue_send_to_back)(void *queue, void *item, uint32_t block_time_tick); + int32_t (* _queue_send_to_front)(void *queue, void *item, uint32_t block_time_tick); + int32_t (* _queue_recv)(void *queue, void *item, uint32_t block_time_tick); + uint32_t (* _queue_msg_waiting)(void *queue); + void *(* _event_group_create)(void); + void (* _event_group_delete)(void *event); + uint32_t (* _event_group_set_bits)(void *event, uint32_t bits); + uint32_t (* _event_group_clear_bits)(void *event, uint32_t bits); + uint32_t (* _event_group_wait_bits)(void *event, uint32_t bits_to_wait_for, int clear_on_exit, int wait_for_all_bits, uint32_t block_time_tick); + int32_t (* _task_create_pinned_to_core)(void *task_func, const char *name, uint32_t stack_depth, void *param, uint32_t prio, void *task_handle, uint32_t core_id); + int32_t (* _task_create)(void *task_func, const char *name, uint32_t stack_depth, void *param, uint32_t prio, void *task_handle); + void (* _task_delete)(void *task_handle); + void (* _task_delay)(uint32_t tick); + int32_t (* _task_ms_to_tick)(uint32_t ms); + void *(* _task_get_current_task)(void); + int32_t (* _task_get_max_priority)(void); + void *(* _malloc)(size_t size); + void (* _free)(void *p); + int32_t (* _event_post)(const char* event_base, int32_t event_id, void* event_data, size_t event_data_size, uint32_t ticks_to_wait); + uint32_t (* _get_free_heap_size)(void); + uint32_t (* _rand)(void); + void (* _dport_access_stall_other_cpu_start_wrap)(void); + void (* _dport_access_stall_other_cpu_end_wrap)(void); + void (* _wifi_apb80m_request)(void); + void (* _wifi_apb80m_release)(void); + void (* _phy_disable)(void); + void (* _phy_enable)(void); +#if CONFIG_IDF_TARGET_ESP32 || CONFIG_IDF_TARGET_ESP32S2 + void (* _phy_common_clock_enable)(void); + void (* _phy_common_clock_disable)(void); +#endif + int (* _phy_update_country_info)(const char* country); + int (* _read_mac)(uint8_t* mac, unsigned int type); + void (* _timer_arm)(void *timer, uint32_t tmout, bool repeat); + void (* _timer_disarm)(void *timer); + void (* _timer_done)(void *ptimer); + void (* _timer_setfn)(void *ptimer, void *pfunction, void *parg); + void (* _timer_arm_us)(void *ptimer, uint32_t us, bool repeat); + void (* _wifi_reset_mac)(void); + void (* _wifi_clock_enable)(void); + void (* _wifi_clock_disable)(void); + void (* _wifi_rtc_enable_iso)(void); + void (* _wifi_rtc_disable_iso)(void); + int64_t (* _esp_timer_get_time)(void); + int (* _nvs_set_i8)(uint32_t handle, const char* key, int8_t value); + int (* _nvs_get_i8)(uint32_t handle, const char* key, int8_t* out_value); + int (* _nvs_set_u8)(uint32_t handle, const char* key, uint8_t value); + int (* _nvs_get_u8)(uint32_t handle, const char* key, uint8_t* out_value); + int (* _nvs_set_u16)(uint32_t handle, const char* key, uint16_t value); + int (* _nvs_get_u16)(uint32_t handle, const char* key, uint16_t* out_value); + int (* _nvs_open)(const char* name, unsigned int open_mode, uint32_t *out_handle); + void (* _nvs_close)(uint32_t handle); + int (* _nvs_commit)(uint32_t handle); + int (* _nvs_set_blob)(uint32_t handle, const char* key, const void* value, size_t length); + int (* _nvs_get_blob)(uint32_t handle, const char* key, void* out_value, size_t* length); + int (* _nvs_erase_key)(uint32_t handle, const char* key); + int (* _get_random)(uint8_t *buf, size_t len); + int (* _get_time)(void *t); + unsigned long (* _random)(void); +#if !CONFIG_IDF_TARGET_ESP32 + uint32_t (* _slowclk_cal_get)(void); +#endif + void (* _log_write)(unsigned int level, const char* tag, const char* format, ...); + void (* _log_writev)(unsigned int level, const char* tag, const char* format, va_list args); + uint32_t (* _log_timestamp)(void); + void * (* _malloc_internal)(size_t size); + void * (* _realloc_internal)(void *ptr, size_t size); + void * (* _calloc_internal)(size_t n, size_t size); + void * (* _zalloc_internal)(size_t size); + void * (* _wifi_malloc)(size_t size); + void * (* _wifi_realloc)(void *ptr, size_t size); + void * (* _wifi_calloc)(size_t n, size_t size); + void * (* _wifi_zalloc)(size_t size); + void * (* _wifi_create_queue)(int queue_len, int item_size); + void (* _wifi_delete_queue)(void * queue); + int (* _coex_init)(void); + void (* _coex_deinit)(void); + int (* _coex_enable)(void); + void (* _coex_disable)(void); + uint32_t (* _coex_status_get)(void); + void (* _coex_condition_set)(uint32_t type, bool dissatisfy); + int (* _coex_wifi_request)(uint32_t event, uint32_t latency, uint32_t duration); + int (* _coex_wifi_release)(uint32_t event); + int (* _coex_wifi_channel_set)(uint8_t primary, uint8_t secondary); + int (* _coex_event_duration_get)(uint32_t event, uint32_t *duration); + int (* _coex_pti_get)(uint32_t event, uint8_t *pti); + void (* _coex_schm_status_bit_clear)(uint32_t type, uint32_t status); + void (* _coex_schm_status_bit_set)(uint32_t type, uint32_t status); + int (* _coex_schm_interval_set)(uint32_t interval); + uint32_t (* _coex_schm_interval_get)(void); + uint8_t (* _coex_schm_curr_period_get)(void); + void * (* _coex_schm_curr_phase_get)(void); + int (* _coex_schm_process_restart)(void); + int (* _coex_schm_register_cb)(int, int (* cb)(int)); + int (* _coex_register_start_cb)(int (* cb)(void)); +#if CONFIG_IDF_TARGET_ESP32C6 + void (* _regdma_link_set_write_wait_content)(void *, uint32_t, uint32_t); + void * (* _sleep_retention_find_link_by_id)(int); + int (* _sleep_retention_entries_create)(const void *, int, int, int); + void (* _sleep_retention_entries_destroy)(int); +#endif + int32_t _magic; +} wifi_osi_funcs_t; + +extern wifi_osi_funcs_t g_wifi_osi_funcs; + +#ifdef __cplusplus +} +#endif + +#endif /* ESP_WIFI_OS_ADAPTER_H_ */ diff --git a/espradio/blobs/headers/esp_private/wifi_types.h b/espradio/blobs/headers/esp_private/wifi_types.h new file mode 100644 index 000000000..4542492c8 --- /dev/null +++ b/espradio/blobs/headers/esp_private/wifi_types.h @@ -0,0 +1,54 @@ +// Copyright 2015-2019 Espressif Systems (Shanghai) PTE LTD +// +// Licensed under the Apache License, Version 2.0 (the "License"); +// you may not use this file except in compliance with the License. +// You may obtain a copy of the License at + +// http://www.apache.org/licenses/LICENSE-2.0 +// +// Unless required by applicable law or agreed to in writing, software +// distributed under the License is distributed on an "AS IS" BASIS, +// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +// See the License for the specific language governing permissions and +// limitations under the License. + +#ifndef _WIFI_TYPES_H +#define _WIFI_TYPES_H + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * @brief WiFi ioctl command type + * + */ +typedef enum { + WIFI_IOCTL_SET_STA_HT2040_COEX = 1, /**< Set the configuration of STA's HT2040 coexist management */ + WIFI_IOCTL_GET_STA_HT2040_COEX, /**< Get the configuration of STA's HT2040 coexist management */ + WIFI_IOCTL_MAX, +} wifi_ioctl_cmd_t; + +/** + * @brief Configuration for STA's HT2040 coexist management + * + */ +typedef struct { + int enable; /**< Indicate whether STA's HT2040 coexist management is enabled or not */ +} wifi_ht2040_coex_t; + +/** + * @brief Configuration for WiFi ioctl + * + */ +typedef struct { + union { + wifi_ht2040_coex_t ht2040_coex; /**< Configuration of STA's HT2040 coexist management */ + } data; /**< Configuration of ioctl command */ +} wifi_ioctl_config_t; + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/espradio/blobs/headers/esp_smartconfig.h b/espradio/blobs/headers/esp_smartconfig.h new file mode 100644 index 000000000..9f7a80a4a --- /dev/null +++ b/espradio/blobs/headers/esp_smartconfig.h @@ -0,0 +1,155 @@ +/* + * SPDX-FileCopyrightText: 2015-2022 Espressif Systems (Shanghai) CO LTD + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#ifndef __ESP_SMARTCONFIG_H__ +#define __ESP_SMARTCONFIG_H__ + +#include +#include +#include "esp_err.h" +#include "esp_event_base.h" + +#ifdef __cplusplus +extern "C" { +#endif + +typedef enum { + SC_TYPE_ESPTOUCH = 0, /**< protocol: ESPTouch */ + SC_TYPE_AIRKISS, /**< protocol: AirKiss */ + SC_TYPE_ESPTOUCH_AIRKISS, /**< protocol: ESPTouch and AirKiss */ + SC_TYPE_ESPTOUCH_V2, /**< protocol: ESPTouch v2*/ +} smartconfig_type_t; + +/** Smartconfig event declarations */ +typedef enum { + SC_EVENT_SCAN_DONE, /*!< Station smartconfig has finished to scan for APs */ + SC_EVENT_FOUND_CHANNEL, /*!< Station smartconfig has found the channel of the target AP */ + SC_EVENT_GOT_SSID_PSWD, /*!< Station smartconfig got the SSID and password */ + SC_EVENT_SEND_ACK_DONE, /*!< Station smartconfig has sent ACK to cellphone */ +} smartconfig_event_t; + +/** @brief smartconfig event base declaration */ +ESP_EVENT_DECLARE_BASE(SC_EVENT); + +/** Argument structure for SC_EVENT_GOT_SSID_PSWD event */ +typedef struct { + uint8_t ssid[32]; /**< SSID of the AP. Null terminated string. */ + uint8_t password[64]; /**< Password of the AP. Null terminated string. */ + bool bssid_set; /**< whether set MAC address of target AP or not. */ + uint8_t bssid[6]; /**< MAC address of target AP. */ + smartconfig_type_t type; /**< Type of smartconfig(ESPTouch or AirKiss). */ + uint8_t token; /**< Token from cellphone which is used to send ACK to cellphone. */ + uint8_t cellphone_ip[4]; /**< IP address of cellphone. */ +} smartconfig_event_got_ssid_pswd_t; + +/** Configure structure for esp_smartconfig_start */ +typedef struct { + bool enable_log; /**< Enable smartconfig logs. */ + bool esp_touch_v2_enable_crypt; /**< Enable ESPTouch v2 crypt. */ + char *esp_touch_v2_key; /**< ESPTouch v2 crypt key, len should be 16. */ +} smartconfig_start_config_t; + +#define SMARTCONFIG_START_CONFIG_DEFAULT() { \ + .enable_log = false, \ + .esp_touch_v2_enable_crypt = false,\ + .esp_touch_v2_key = NULL \ +}; + +/** + * @brief Get the version of SmartConfig. + * + * @return + * - SmartConfig version const char. + */ +const char *esp_smartconfig_get_version(void); + +/** + * @brief Start SmartConfig, config ESP device to connect AP. You need to broadcast information by phone APP. + * Device sniffer special packets from the air that containing SSID and password of target AP. + * + * @attention 1. This API can be called in station or softAP-station mode. + * @attention 2. Can not call esp_smartconfig_start twice before it finish, please call + * esp_smartconfig_stop first. + * + * @param config pointer to smartconfig start configure structure + * + * @return + * - ESP_OK: succeed + * - others: fail + */ +esp_err_t esp_smartconfig_start(const smartconfig_start_config_t *config); + +/** + * @brief Stop SmartConfig, free the buffer taken by esp_smartconfig_start. + * + * @attention Whether connect to AP succeed or not, this API should be called to free + * memory taken by smartconfig_start. + * + * @return + * - ESP_OK: succeed + * - others: fail + */ +esp_err_t esp_smartconfig_stop(void); + +/** + * @brief Set timeout of SmartConfig process. + * + * @attention Timing starts from SC_STATUS_FIND_CHANNEL status. SmartConfig will restart if timeout. + * + * @param time_s range 15s~255s, offset:45s. + * + * @return + * - ESP_OK: succeed + * - others: fail + */ +esp_err_t esp_esptouch_set_timeout(uint8_t time_s); + +/** + * @brief Set protocol type of SmartConfig. + * + * @attention If users need to set the SmartConfig type, please set it before calling + * esp_smartconfig_start. + * + * @param type Choose from the smartconfig_type_t. + * + * @return + * - ESP_OK: succeed + * - others: fail + */ +esp_err_t esp_smartconfig_set_type(smartconfig_type_t type); + +/** + * @brief Set mode of SmartConfig. default normal mode. + * + * @attention 1. Please call it before API esp_smartconfig_start. + * @attention 2. Fast mode have corresponding APP(phone). + * @attention 3. Two mode is compatible. + * + * @param enable false-disable(default); true-enable; + * + * @return + * - ESP_OK: succeed + * - others: fail + */ +esp_err_t esp_smartconfig_fast_mode(bool enable); + +/** + * @brief Get reserved data of ESPTouch v2. + * + * @param rvd_data reserved data + * @param len length of reserved data + * + * @return + * - ESP_OK: succeed + * - others: fail + */ +esp_err_t esp_smartconfig_get_rvd_data(uint8_t *rvd_data, uint8_t len); + +#ifdef __cplusplus +} +#endif + +#endif diff --git a/espradio/blobs/headers/esp_system.h b/espradio/blobs/headers/esp_system.h new file mode 100644 index 000000000..0157a426e --- /dev/null +++ b/espradio/blobs/headers/esp_system.h @@ -0,0 +1,118 @@ +/* + * SPDX-FileCopyrightText: 2015-2022 Espressif Systems (Shanghai) CO LTD + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#ifndef __ESP_SYSTEM_H__ +#define __ESP_SYSTEM_H__ + +#include +#include +#include "esp_err.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * @brief Reset reasons + */ +typedef enum { + ESP_RST_UNKNOWN, //!< Reset reason can not be determined + ESP_RST_POWERON, //!< Reset due to power-on event + ESP_RST_EXT, //!< Reset by external pin (not applicable for ESP32) + ESP_RST_SW, //!< Software reset via esp_restart + ESP_RST_PANIC, //!< Software reset due to exception/panic + ESP_RST_INT_WDT, //!< Reset (software or hardware) due to interrupt watchdog + ESP_RST_TASK_WDT, //!< Reset due to task watchdog + ESP_RST_WDT, //!< Reset due to other watchdogs + ESP_RST_DEEPSLEEP, //!< Reset after exiting deep sleep mode + ESP_RST_BROWNOUT, //!< Brownout reset (software or hardware) + ESP_RST_SDIO, //!< Reset over SDIO +} esp_reset_reason_t; + +/** + * Shutdown handler type + */ +typedef void (*shutdown_handler_t)(void); + +/** + * @brief Register shutdown handler + * + * This function allows you to register a handler that gets invoked before + * the application is restarted using esp_restart function. + * @param handle function to execute on restart + * @return + * - ESP_OK on success + * - ESP_ERR_INVALID_STATE if the handler has already been registered + * - ESP_ERR_NO_MEM if no more shutdown handler slots are available + */ +esp_err_t esp_register_shutdown_handler(shutdown_handler_t handle); + +/** + * @brief Unregister shutdown handler + * + * This function allows you to unregister a handler which was previously + * registered using esp_register_shutdown_handler function. + * - ESP_OK on success + * - ESP_ERR_INVALID_STATE if the given handler hasn't been registered before + */ +esp_err_t esp_unregister_shutdown_handler(shutdown_handler_t handle); + + +/** + * @brief Restart PRO and APP CPUs. + * + * This function can be called both from PRO and APP CPUs. + * After successful restart, CPU reset reason will be SW_CPU_RESET. + * Peripherals (except for Wi-Fi, BT, UART0, SPI1, and legacy timers) are not reset. + * This function does not return. + */ +void esp_restart(void) __attribute__ ((__noreturn__)); + +/** + * @brief Get reason of last reset + * @return See description of esp_reset_reason_t for explanation of each value. + */ +esp_reset_reason_t esp_reset_reason(void); + +/** + * @brief Get the size of available heap. + * + * @note Note that the returned value may be larger than the maximum contiguous block + * which can be allocated. + * + * @return Available heap size, in bytes. + */ +uint32_t esp_get_free_heap_size(void); + +/** + * @brief Get the size of available internal heap. + * + * @note Note that the returned value may be larger than the maximum contiguous block + * which can be allocated. + * + * @return Available internal heap size, in bytes. + */ +uint32_t esp_get_free_internal_heap_size(void); + +/** + * @brief Get the minimum heap that has ever been available + * + * @return Minimum free heap ever available + */ +uint32_t esp_get_minimum_free_heap_size( void ); + +/** + * @brief Trigger a software abort + * + * @param details Details that will be displayed during panic handling. + */ +void __attribute__((__noreturn__)) esp_system_abort(const char* details); + +#ifdef __cplusplus +} +#endif + +#endif /* __ESP_SYSTEM_H__ */ diff --git a/espradio/blobs/headers/esp_timer.h b/espradio/blobs/headers/esp_timer.h new file mode 100644 index 000000000..8d91e261a --- /dev/null +++ b/espradio/blobs/headers/esp_timer.h @@ -0,0 +1,337 @@ +/* + * SPDX-FileCopyrightText: 2017-2022 Espressif Systems (Shanghai) CO LTD + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#pragma once + +/** + * @file esp_timer.h + * @brief microsecond-precision 64-bit timer API, replacement for ets_timer + * + * esp_timer APIs allow components to receive callbacks when a hardware timer + * reaches certain value. The timer provides microsecond accuracy and + * up to 64 bit range. Note that while the timer itself provides microsecond + * accuracy, callbacks are dispatched from an auxiliary task. Some time is + * needed to notify this task from timer ISR, and then to invoke the callback. + * If more than one callback needs to be dispatched at any particular time, + * each subsequent callback will be dispatched only when the previous callback + * returns. Therefore, callbacks should not do much work; instead, they should + * use RTOS notification mechanisms (queues, semaphores, event groups, etc.) to + * pass information to other tasks. + * + * To be implemented: it should be possible to request the callback to be called + * directly from the ISR. This reduces the latency, but has potential impact on + * all other callbacks which need to be dispatched. This option should only be + * used for simple callback functions, which do not take longer than a few + * microseconds to run. + * + * Timer callbacks are called from a task running on the PRO CPU. + */ + +#include +#include +#include +#include "esp_err.h" +#include "esp_etm.h" +#include "sdkconfig.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * @brief Opaque type representing a single esp_timer + */ +typedef struct esp_timer* esp_timer_handle_t; + +/** + * @brief Timer callback function type + * @param arg pointer to opaque user-specific data + */ +typedef void (*esp_timer_cb_t)(void* arg); + + +/** + * @brief Method for dispatching timer callback + */ +typedef enum { + ESP_TIMER_TASK, //!< Callback is called from timer task +#ifdef CONFIG_ESP_TIMER_SUPPORTS_ISR_DISPATCH_METHOD + ESP_TIMER_ISR, //!< Callback is called from timer ISR +#endif + ESP_TIMER_MAX, //!< Count of the methods for dispatching timer callback +} esp_timer_dispatch_t; + +/** + * @brief Timer configuration passed to esp_timer_create + */ +typedef struct { + esp_timer_cb_t callback; //!< Function to call when timer expires + void* arg; //!< Argument to pass to the callback + esp_timer_dispatch_t dispatch_method; //!< Call the callback from task or from ISR + const char* name; //!< Timer name, used in esp_timer_dump function + bool skip_unhandled_events; //!< Skip unhandled events for periodic timers +} esp_timer_create_args_t; + + +/** + * @brief Minimal initialization of esp_timer + * + * @note This function is called from startup code. Applications do not need + * to call this function before using other esp_timer APIs. + * + * This function can be called very early in startup process, after this call + * only esp_timer_get_time function can be used. + * + * @return + * - ESP_OK on success + */ +esp_err_t esp_timer_early_init(void); + +/** + * @brief Initialize esp_timer library + * + * @note This function is called from startup code. Applications do not need + * to call this function before using other esp_timer APIs. + * Before calling this function, esp_timer_early_init must be called by the + * startup code. + * + * This function will be called from startup code on every core + * if CONFIG_ESP_TIMER_ISR_AFFINITY_NO_AFFINITY is enabled, + * It allocates the timer ISR on MULTIPLE cores and + * creates the timer task which can be run on any core. + * + * @return + * - ESP_OK on success + * - ESP_ERR_NO_MEM if allocation has failed + * - ESP_ERR_INVALID_STATE if already initialized + * - other errors from interrupt allocator + */ +esp_err_t esp_timer_init(void); + +/** + * @brief De-initialize esp_timer library + * + * @note Normally this function should not be called from applications + * + * @return + * - ESP_OK on success + * - ESP_ERR_INVALID_STATE if not yet initialized + */ +esp_err_t esp_timer_deinit(void); + +/** + * @brief Create an esp_timer instance + * + * @note When done using the timer, delete it with esp_timer_delete function. + * + * @param create_args Pointer to a structure with timer creation arguments. + * Not saved by the library, can be allocated on the stack. + * @param[out] out_handle Output, pointer to esp_timer_handle_t variable which + * will hold the created timer handle. + * + * @return + * - ESP_OK on success + * - ESP_ERR_INVALID_ARG if some of the create_args are not valid + * - ESP_ERR_INVALID_STATE if esp_timer library is not initialized yet + * - ESP_ERR_NO_MEM if memory allocation fails + */ +esp_err_t esp_timer_create(const esp_timer_create_args_t* create_args, + esp_timer_handle_t* out_handle); + +/** + * @brief Start one-shot timer + * + * Timer should not be running when this function is called. + * + * @param timer timer handle created using esp_timer_create + * @param timeout_us timer timeout, in microseconds relative to the current moment + * @return + * - ESP_OK on success + * - ESP_ERR_INVALID_ARG if the handle is invalid + * - ESP_ERR_INVALID_STATE if the timer is already running + */ +esp_err_t esp_timer_start_once(esp_timer_handle_t timer, uint64_t timeout_us); + +/** + * @brief Start a periodic timer + * + * Timer should not be running when this function is called. This function will + * start the timer which will trigger every 'period' microseconds. + * + * @param timer timer handle created using esp_timer_create + * @param period timer period, in microseconds + * @return + * - ESP_OK on success + * - ESP_ERR_INVALID_ARG if the handle is invalid + * - ESP_ERR_INVALID_STATE if the timer is already running + */ +esp_err_t esp_timer_start_periodic(esp_timer_handle_t timer, uint64_t period); + +/** + * @brief Restart a currently running timer + * + * If the given timer is a one-shot timer, the timer is restarted immediately and will timeout once in `timeout_us` microseconds. + * If the given timer is a periodic timer, the timer is restarted immediately with a new period of `timeout_us` microseconds. + * + * @param timer timer Handle created using esp_timer_create + * @param timeout_us Timeout, in microseconds relative to the current time. + * In case of a periodic timer, also represents the new period. + * @return + * - ESP_OK on success + * - ESP_ERR_INVALID_ARG if the handle is invalid + * - ESP_ERR_INVALID_STATE if the timer is not running + */ +esp_err_t esp_timer_restart(esp_timer_handle_t timer, uint64_t timeout_us); + +/** + * @brief Stop the timer + * + * This function stops the timer previously started using esp_timer_start_once + * or esp_timer_start_periodic. + * + * @param timer timer handle created using esp_timer_create + * @return + * - ESP_OK on success + * - ESP_ERR_INVALID_STATE if the timer is not running + */ +esp_err_t esp_timer_stop(esp_timer_handle_t timer); + +/** + * @brief Delete an esp_timer instance + * + * The timer must be stopped before deleting. A one-shot timer which has expired + * does not need to be stopped. + * + * @param timer timer handle allocated using esp_timer_create + * @return + * - ESP_OK on success + * - ESP_ERR_INVALID_STATE if the timer is running + */ +esp_err_t esp_timer_delete(esp_timer_handle_t timer); + +/** + * @brief Get time in microseconds since boot + * @return number of microseconds since underlying timer has been started + */ +int64_t esp_timer_get_time(void); + +/** + * @brief Get the timestamp when the next timeout is expected to occur + * @return Timestamp of the nearest timer event, in microseconds. + * The timebase is the same as for the values returned by esp_timer_get_time. + */ +int64_t esp_timer_get_next_alarm(void); + +/** + * @brief Get the timestamp when the next timeout is expected to occur skipping those which have skip_unhandled_events flag + * @return Timestamp of the nearest timer event, in microseconds. + * The timebase is the same as for the values returned by esp_timer_get_time. + */ +int64_t esp_timer_get_next_alarm_for_wake_up(void); + +/** + * @brief Get the period of a timer + * + * This function fetches the timeout period of a timer. + * + * @note The timeout period is the time interval with which a timer restarts after expiry. For one-shot timers, the + * period is 0 as there is no periodicity associated with such timers. + * + * @param timer timer handle allocated using esp_timer_create + * @param period memory to store the timer period value in microseconds + * @return + * - ESP_OK on success + * - ESP_ERR_INVALID_ARG if the arguments are invalid + */ +esp_err_t esp_timer_get_period(esp_timer_handle_t timer, uint64_t *period); + +/** + * @brief Get the expiry time of a one-shot timer + * + * This function fetches the expiry time of a one-shot timer. + * + * @note This API returns a valid expiry time only for a one-shot timer. It returns an error if the timer handle passed + * to the function is for a periodic timer. + * + * @param timer timer handle allocated using esp_timer_create + * @param expiry memory to store the timeout value in microseconds + * @return + * - ESP_OK on success + * - ESP_ERR_INVALID_ARG if the arguments are invalid + * - ESP_ERR_NOT_SUPPORTED if the timer type is periodic + */ +esp_err_t esp_timer_get_expiry_time(esp_timer_handle_t timer, uint64_t *expiry); + +/** + * @brief Dump the list of timers to a stream + * + * If CONFIG_ESP_TIMER_PROFILING option is enabled, this prints the list of all + * the existing timers. Otherwise, only the list active timers is printed. + * + * The format is: + * + * name period alarm times_armed times_triggered total_callback_run_time + * + * where: + * + * name — timer name (if CONFIG_ESP_TIMER_PROFILING is defined), or timer pointer + * period — period of timer, in microseconds, or 0 for one-shot timer + * alarm - time of the next alarm, in microseconds since boot, or 0 if the timer + * is not started + * + * The following fields are printed if CONFIG_ESP_TIMER_PROFILING is defined: + * + * times_armed — number of times the timer was armed via esp_timer_start_X + * times_triggered - number of times the callback was called + * total_callback_run_time - total time taken by callback to execute, across all calls + * + * @param stream stream (such as stdout) to dump the information to + * @return + * - ESP_OK on success + * - ESP_ERR_NO_MEM if can not allocate temporary buffer for the output + */ +esp_err_t esp_timer_dump(FILE* stream); + +#if CONFIG_ESP_TIMER_SUPPORTS_ISR_DISPATCH_METHOD || defined __DOXYGEN__ +/** + * @brief Requests a context switch from a timer callback function. + * + * This only works for a timer that has an ISR dispatch method. + * The context switch will be called after all ISR dispatch timers have been processed. + */ +void esp_timer_isr_dispatch_need_yield(void); +#endif // CONFIG_ESP_TIMER_SUPPORTS_ISR_DISPATCH_METHOD || defined __DOXYGEN__ + +/** + * @brief Returns status of a timer, active or not + * + * This function is used to identify if the timer is still active or not. + * + * @param timer timer handle created using esp_timer_create + * @return + * - 1 if timer is still active + * - 0 if timer is not active. + */ +bool esp_timer_is_active(esp_timer_handle_t timer); + +/** + * @brief Get the ETM event handle of esp_timer underlying alarm event + * + * @note The created ETM event object can be deleted later by calling `esp_etm_del_event` + * + * @note The ETM event is generated by the underlying hardware -- systimer, + * therefore, if the esp_timer is not clocked by systimer, then no ETM event will be generated. + * + * @param[out] out_event Returned ETM event handle + * @return + * - ESP_OK Success + * - ESP_ERR_INVALID_ARG Parameter error + */ +esp_err_t esp_timer_new_etm_alarm_event(esp_etm_event_handle_t *out_event); + +#ifdef __cplusplus +} +#endif diff --git a/espradio/blobs/headers/esp_wifi.h b/espradio/blobs/headers/esp_wifi.h new file mode 100644 index 000000000..308af3214 --- /dev/null +++ b/espradio/blobs/headers/esp_wifi.h @@ -0,0 +1,1477 @@ +/* + * SPDX-FileCopyrightText: 2015-2023 Espressif Systems (Shanghai) CO LTD + * + * SPDX-License-Identifier: Apache-2.0 + */ + + +/* Notes about WiFi Programming + * + * WiFi programming model can be depicted as following picture: + * + * + * default handler user handler + * ------------- --------------- --------------- + * | | event | | callback or | | + * | tcpip | ---------> | event | ----------> | application | + * | stack | | task | event | task | + * |-----------| |-------------| |-------------| + * /|\ | + * | | + * event | | + * | | + * | | + * --------------- | + * | | | + * | WiFi Driver |/__________________| + * | |\ API call + * | | + * |-------------| + * + * The WiFi driver can be consider as black box, it knows nothing about the high layer code, such as + * TCPIP stack, application task, event task etc, all it can do is to receive API call from high layer + * or post event queue to a specified Queue, which is initialized by API esp_wifi_init(). + * + * The event task is a daemon task, which receives events from WiFi driver or from other subsystem, such + * as TCPIP stack, event task will call the default callback function on receiving the event. For example, + * on receiving event WIFI_EVENT_STA_CONNECTED, it will call esp_netif API to start the DHCP + * client in it's default handler. + * + * Application can register it's own event callback function by API esp_event_init, then the application callback + * function will be called after the default callback. Also, if application doesn't want to execute the callback + * in the event task, what it needs to do is to post the related event to application task in the application callback function. + * + * The application task (code) generally mixes all these thing together, it calls APIs to init the system/WiFi and + * handle the events when necessary. + * + */ + +#ifndef __ESP_WIFI_H__ +#define __ESP_WIFI_H__ + +#include +#include +#include "esp_err.h" +#include "esp_wifi_types.h" +#include "esp_event.h" +#include "esp_private/esp_wifi_private.h" +#include "esp_wifi_default.h" + +#ifdef __cplusplus +extern "C" { +#endif + +#define ESP_ERR_WIFI_NOT_INIT (ESP_ERR_WIFI_BASE + 1) /*!< WiFi driver was not installed by esp_wifi_init */ +#define ESP_ERR_WIFI_NOT_STARTED (ESP_ERR_WIFI_BASE + 2) /*!< WiFi driver was not started by esp_wifi_start */ +#define ESP_ERR_WIFI_NOT_STOPPED (ESP_ERR_WIFI_BASE + 3) /*!< WiFi driver was not stopped by esp_wifi_stop */ +#define ESP_ERR_WIFI_IF (ESP_ERR_WIFI_BASE + 4) /*!< WiFi interface error */ +#define ESP_ERR_WIFI_MODE (ESP_ERR_WIFI_BASE + 5) /*!< WiFi mode error */ +#define ESP_ERR_WIFI_STATE (ESP_ERR_WIFI_BASE + 6) /*!< WiFi internal state error */ +#define ESP_ERR_WIFI_CONN (ESP_ERR_WIFI_BASE + 7) /*!< WiFi internal control block of station or soft-AP error */ +#define ESP_ERR_WIFI_NVS (ESP_ERR_WIFI_BASE + 8) /*!< WiFi internal NVS module error */ +#define ESP_ERR_WIFI_MAC (ESP_ERR_WIFI_BASE + 9) /*!< MAC address is invalid */ +#define ESP_ERR_WIFI_SSID (ESP_ERR_WIFI_BASE + 10) /*!< SSID is invalid */ +#define ESP_ERR_WIFI_PASSWORD (ESP_ERR_WIFI_BASE + 11) /*!< Password is invalid */ +#define ESP_ERR_WIFI_TIMEOUT (ESP_ERR_WIFI_BASE + 12) /*!< Timeout error */ +#define ESP_ERR_WIFI_WAKE_FAIL (ESP_ERR_WIFI_BASE + 13) /*!< WiFi is in sleep state(RF closed) and wakeup fail */ +#define ESP_ERR_WIFI_WOULD_BLOCK (ESP_ERR_WIFI_BASE + 14) /*!< The caller would block */ +#define ESP_ERR_WIFI_NOT_CONNECT (ESP_ERR_WIFI_BASE + 15) /*!< Station still in disconnect status */ + +#define ESP_ERR_WIFI_POST (ESP_ERR_WIFI_BASE + 18) /*!< Failed to post the event to WiFi task */ +#define ESP_ERR_WIFI_INIT_STATE (ESP_ERR_WIFI_BASE + 19) /*!< Invalid WiFi state when init/deinit is called */ +#define ESP_ERR_WIFI_STOP_STATE (ESP_ERR_WIFI_BASE + 20) /*!< Returned when WiFi is stopping */ +#define ESP_ERR_WIFI_NOT_ASSOC (ESP_ERR_WIFI_BASE + 21) /*!< The WiFi connection is not associated */ +#define ESP_ERR_WIFI_TX_DISALLOW (ESP_ERR_WIFI_BASE + 22) /*!< The WiFi TX is disallowed */ + +#define ESP_ERR_WIFI_TWT_FULL (ESP_ERR_WIFI_BASE + 23) /*!< no available flow id */ +#define ESP_ERR_WIFI_TWT_SETUP_TIMEOUT (ESP_ERR_WIFI_BASE + 24) /*!< Timeout of receiving twt setup response frame, timeout times can be set during twt setup */ +#define ESP_ERR_WIFI_TWT_SETUP_TXFAIL (ESP_ERR_WIFI_BASE + 25) /*!< TWT setup frame tx failed */ +#define ESP_ERR_WIFI_TWT_SETUP_REJECT (ESP_ERR_WIFI_BASE + 26) /*!< The twt setup request was rejected by the AP */ +#define ESP_ERR_WIFI_DISCARD (ESP_ERR_WIFI_BASE + 27) /*!< Discard frame */ + +/** + * @brief WiFi stack configuration parameters passed to esp_wifi_init call. + */ +typedef struct { + wifi_osi_funcs_t* osi_funcs; /**< WiFi OS functions */ + wpa_crypto_funcs_t wpa_crypto_funcs; /**< WiFi station crypto functions when connect */ + int static_rx_buf_num; /**< WiFi static RX buffer number */ + int dynamic_rx_buf_num; /**< WiFi dynamic RX buffer number */ + int tx_buf_type; /**< WiFi TX buffer type */ + int static_tx_buf_num; /**< WiFi static TX buffer number */ + int dynamic_tx_buf_num; /**< WiFi dynamic TX buffer number */ + int rx_mgmt_buf_type; /**< WiFi RX MGMT buffer type */ + int rx_mgmt_buf_num; /**< WiFi RX MGMT buffer number */ + int cache_tx_buf_num; /**< WiFi TX cache buffer number */ + int csi_enable; /**< WiFi channel state information enable flag */ + int ampdu_rx_enable; /**< WiFi AMPDU RX feature enable flag */ + int ampdu_tx_enable; /**< WiFi AMPDU TX feature enable flag */ + int amsdu_tx_enable; /**< WiFi AMSDU TX feature enable flag */ + int nvs_enable; /**< WiFi NVS flash enable flag */ + int nano_enable; /**< Nano option for printf/scan family enable flag */ + int rx_ba_win; /**< WiFi Block Ack RX window size */ + int wifi_task_core_id; /**< WiFi Task Core ID */ + int beacon_max_len; /**< WiFi softAP maximum length of the beacon */ + int mgmt_sbuf_num; /**< WiFi management short buffer number, the minimum value is 6, the maximum value is 32 */ + uint64_t feature_caps; /**< Enables additional WiFi features and capabilities */ + bool sta_disconnected_pm; /**< WiFi Power Management for station at disconnected status */ + int espnow_max_encrypt_num; /**< Maximum encrypt number of peers supported by espnow */ + int magic; /**< WiFi init magic number, it should be the last field */ +} wifi_init_config_t; + +#ifdef CONFIG_ESP_WIFI_STATIC_TX_BUFFER_NUM +#define WIFI_STATIC_TX_BUFFER_NUM CONFIG_ESP_WIFI_STATIC_TX_BUFFER_NUM +#else +#define WIFI_STATIC_TX_BUFFER_NUM 0 +#endif + +#if CONFIG_SPIRAM +#define WIFI_CACHE_TX_BUFFER_NUM CONFIG_ESP_WIFI_CACHE_TX_BUFFER_NUM +#else +#define WIFI_CACHE_TX_BUFFER_NUM 0 +#endif + +#ifdef CONFIG_ESP_WIFI_DYNAMIC_TX_BUFFER_NUM +#define WIFI_DYNAMIC_TX_BUFFER_NUM CONFIG_ESP_WIFI_DYNAMIC_TX_BUFFER_NUM +#else +#define WIFI_DYNAMIC_TX_BUFFER_NUM 0 +#endif + +#ifdef CONFIG_ESP_WIFI_RX_MGMT_BUF_NUM_DEF +#define WIFI_RX_MGMT_BUF_NUM_DEF CONFIG_ESP_WIFI_RX_MGMT_BUF_NUM_DEF +#else +#define WIFI_RX_MGMT_BUF_NUM_DEF 0 +#endif + +#if CONFIG_ESP_WIFI_CSI_ENABLED +#define WIFI_CSI_ENABLED 1 +#else +#define WIFI_CSI_ENABLED 0 +#endif + +#if CONFIG_ESP_WIFI_AMPDU_RX_ENABLED +#define WIFI_AMPDU_RX_ENABLED 1 +#else +#define WIFI_AMPDU_RX_ENABLED 0 +#endif + +#if CONFIG_ESP_WIFI_AMPDU_TX_ENABLED +#define WIFI_AMPDU_TX_ENABLED 1 +#else +#define WIFI_AMPDU_TX_ENABLED 0 +#endif + +#if CONFIG_ESP_WIFI_AMSDU_TX_ENABLED +#define WIFI_AMSDU_TX_ENABLED 1 +#else +#define WIFI_AMSDU_TX_ENABLED 0 +#endif + +#if CONFIG_ESP_WIFI_NVS_ENABLED +#define WIFI_NVS_ENABLED 1 +#else +#define WIFI_NVS_ENABLED 0 +#endif + +#if CONFIG_NEWLIB_NANO_FORMAT +#define WIFI_NANO_FORMAT_ENABLED 1 +#else +#define WIFI_NANO_FORMAT_ENABLED 0 +#endif + +extern const wpa_crypto_funcs_t g_wifi_default_wpa_crypto_funcs; + +#define WIFI_INIT_CONFIG_MAGIC 0x1F2F3F4F + +#ifdef CONFIG_ESP_WIFI_AMPDU_RX_ENABLED +#define WIFI_DEFAULT_RX_BA_WIN CONFIG_ESP_WIFI_RX_BA_WIN +#else +#define WIFI_DEFAULT_RX_BA_WIN 0 /* unused if ampdu_rx_enable == false */ +#endif + +#if CONFIG_ESP_WIFI_TASK_PINNED_TO_CORE_1 +#define WIFI_TASK_CORE_ID 1 +#else +#define WIFI_TASK_CORE_ID 0 +#endif + +#ifdef CONFIG_ESP_WIFI_SOFTAP_BEACON_MAX_LEN +#define WIFI_SOFTAP_BEACON_MAX_LEN CONFIG_ESP_WIFI_SOFTAP_BEACON_MAX_LEN +#else +#define WIFI_SOFTAP_BEACON_MAX_LEN 752 +#endif + +#ifdef CONFIG_ESP_WIFI_MGMT_SBUF_NUM +#define WIFI_MGMT_SBUF_NUM CONFIG_ESP_WIFI_MGMT_SBUF_NUM +#else +#define WIFI_MGMT_SBUF_NUM 32 +#endif + +#if CONFIG_ESP_WIFI_STA_DISCONNECTED_PM_ENABLE +#define WIFI_STA_DISCONNECTED_PM_ENABLED true +#else +#define WIFI_STA_DISCONNECTED_PM_ENABLED false +#endif + +#if CONFIG_ESP_WIFI_ENABLE_WPA3_SAE +#define WIFI_ENABLE_WPA3_SAE (1<<0) +#else +#define WIFI_ENABLE_WPA3_SAE 0 +#endif + +#if CONFIG_SPIRAM +#define WIFI_ENABLE_SPIRAM (1<<1) +#else +#define WIFI_ENABLE_SPIRAM 0 +#endif + +#if CONFIG_ESP_WIFI_FTM_INITIATOR_SUPPORT +#define WIFI_FTM_INITIATOR (1<<2) +#else +#define WIFI_FTM_INITIATOR 0 +#endif + +#if CONFIG_ESP_WIFI_FTM_RESPONDER_SUPPORT +#define WIFI_FTM_RESPONDER (1<<3) +#else +#define WIFI_FTM_RESPONDER 0 +#endif + +#define CONFIG_FEATURE_WPA3_SAE_BIT (1<<0) +#define CONFIG_FEATURE_CACHE_TX_BUF_BIT (1<<1) +#define CONFIG_FEATURE_FTM_INITIATOR_BIT (1<<2) +#define CONFIG_FEATURE_FTM_RESPONDER_BIT (1<<3) + +/* Set additional WiFi features and capabilities */ +#define WIFI_FEATURE_CAPS (WIFI_ENABLE_WPA3_SAE | \ + WIFI_ENABLE_SPIRAM | \ + WIFI_FTM_INITIATOR | \ + WIFI_FTM_RESPONDER) + +#define WIFI_INIT_CONFIG_DEFAULT() { \ + .osi_funcs = &g_wifi_osi_funcs, \ + .wpa_crypto_funcs = g_wifi_default_wpa_crypto_funcs, \ + .static_rx_buf_num = CONFIG_ESP_WIFI_STATIC_RX_BUFFER_NUM,\ + .dynamic_rx_buf_num = CONFIG_ESP_WIFI_DYNAMIC_RX_BUFFER_NUM,\ + .tx_buf_type = CONFIG_ESP_WIFI_TX_BUFFER_TYPE,\ + .static_tx_buf_num = WIFI_STATIC_TX_BUFFER_NUM,\ + .dynamic_tx_buf_num = WIFI_DYNAMIC_TX_BUFFER_NUM,\ + .rx_mgmt_buf_type = CONFIG_ESP_WIFI_DYNAMIC_RX_MGMT_BUF,\ + .rx_mgmt_buf_num = WIFI_RX_MGMT_BUF_NUM_DEF,\ + .cache_tx_buf_num = WIFI_CACHE_TX_BUFFER_NUM,\ + .csi_enable = WIFI_CSI_ENABLED,\ + .ampdu_rx_enable = WIFI_AMPDU_RX_ENABLED,\ + .ampdu_tx_enable = WIFI_AMPDU_TX_ENABLED,\ + .amsdu_tx_enable = WIFI_AMSDU_TX_ENABLED,\ + .nvs_enable = WIFI_NVS_ENABLED,\ + .nano_enable = WIFI_NANO_FORMAT_ENABLED,\ + .rx_ba_win = WIFI_DEFAULT_RX_BA_WIN,\ + .wifi_task_core_id = WIFI_TASK_CORE_ID,\ + .beacon_max_len = WIFI_SOFTAP_BEACON_MAX_LEN, \ + .mgmt_sbuf_num = WIFI_MGMT_SBUF_NUM, \ + .feature_caps = WIFI_FEATURE_CAPS, \ + .sta_disconnected_pm = WIFI_STA_DISCONNECTED_PM_ENABLED, \ + .espnow_max_encrypt_num = CONFIG_ESP_WIFI_ESPNOW_MAX_ENCRYPT_NUM, \ + .magic = WIFI_INIT_CONFIG_MAGIC\ +} + +/** + * @brief Initialize WiFi + * Allocate resource for WiFi driver, such as WiFi control structure, RX/TX buffer, + * WiFi NVS structure etc. This WiFi also starts WiFi task + * + * @attention 1. This API must be called before all other WiFi API can be called + * @attention 2. Always use WIFI_INIT_CONFIG_DEFAULT macro to initialize the configuration to default values, this can + * guarantee all the fields get correct value when more fields are added into wifi_init_config_t + * in future release. If you want to set your own initial values, overwrite the default values + * which are set by WIFI_INIT_CONFIG_DEFAULT. Please be notified that the field 'magic' of + * wifi_init_config_t should always be WIFI_INIT_CONFIG_MAGIC! + * + * @param config pointer to WiFi initialized configuration structure; can point to a temporary variable. + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_NO_MEM: out of memory + * - others: refer to error code esp_err.h + */ +esp_err_t esp_wifi_init(const wifi_init_config_t *config); + +/** + * @brief Deinit WiFi + * Free all resource allocated in esp_wifi_init and stop WiFi task + * + * @attention 1. This API should be called if you want to remove WiFi driver from the system + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + */ +esp_err_t esp_wifi_deinit(void); + +/** + * @brief Set the WiFi operating mode + * + * Set the WiFi operating mode as station, soft-AP, station+soft-AP or NAN. + * The default mode is station mode. + * + * @param mode WiFi operating mode + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + * - ESP_ERR_INVALID_ARG: invalid argument + * - others: refer to error code in esp_err.h + */ +esp_err_t esp_wifi_set_mode(wifi_mode_t mode); + +/** + * @brief Get current operating mode of WiFi + * + * @param[out] mode store current WiFi mode + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + * - ESP_ERR_INVALID_ARG: invalid argument + */ +esp_err_t esp_wifi_get_mode(wifi_mode_t *mode); + +/** + * @brief Start WiFi according to current configuration + * If mode is WIFI_MODE_STA, it creates station control block and starts station + * If mode is WIFI_MODE_AP, it creates soft-AP control block and starts soft-AP + * If mode is WIFI_MODE_APSTA, it creates soft-AP and station control block and starts soft-AP and station + * If mode is WIFI_MODE_NAN, it creates NAN control block and starts NAN + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + * - ESP_ERR_INVALID_ARG: invalid argument + * - ESP_ERR_NO_MEM: out of memory + * - ESP_ERR_WIFI_CONN: WiFi internal error, station or soft-AP control block wrong + * - ESP_FAIL: other WiFi internal errors + */ +esp_err_t esp_wifi_start(void); + +/** + * @brief Stop WiFi + * If mode is WIFI_MODE_STA, it stops station and frees station control block + * If mode is WIFI_MODE_AP, it stops soft-AP and frees soft-AP control block + * If mode is WIFI_MODE_APSTA, it stops station/soft-AP and frees station/soft-AP control block + * If mode is WIFI_MODE_NAN, it stops NAN and frees NAN control block + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + */ +esp_err_t esp_wifi_stop(void); + +/** + * @brief Restore WiFi stack persistent settings to default values + * + * This function will reset settings made using the following APIs: + * - esp_wifi_set_bandwidth, + * - esp_wifi_set_protocol, + * - esp_wifi_set_config related + * - esp_wifi_set_mode + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + */ +esp_err_t esp_wifi_restore(void); + +/** + * @brief Connect WiFi station to the AP. + * + * @attention 1. This API only impact WIFI_MODE_STA or WIFI_MODE_APSTA mode + * @attention 2. If station interface is connected to an AP, call esp_wifi_disconnect to disconnect. + * @attention 3. The scanning triggered by esp_wifi_scan_start() will not be effective until connection between device and the AP is established. + * If device is scanning and connecting at the same time, it will abort scanning and return a warning message and error + * number ESP_ERR_WIFI_STATE. + * @attention 4. This API attempts to connect to an Access Point (AP) only once. To enable reconnection in case of a connection failure, please use + * the 'failure_retry_cnt' feature in the 'wifi_sta_config_t'. Users are suggested to implement reconnection logic in their application + * for scenarios where the specified AP does not exist, or reconnection is desired after the device has received a disconnect event. + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + * - ESP_ERR_WIFI_NOT_STARTED: WiFi is not started by esp_wifi_start + * - ESP_ERR_WIFI_CONN: WiFi internal error, station or soft-AP control block wrong + * - ESP_ERR_WIFI_SSID: SSID of AP which station connects is invalid + */ +esp_err_t esp_wifi_connect(void); + +/** + * @brief Disconnect WiFi station from the AP. + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi was not initialized by esp_wifi_init + * - ESP_ERR_WIFI_NOT_STARTED: WiFi was not started by esp_wifi_start + * - ESP_FAIL: other WiFi internal errors + */ +esp_err_t esp_wifi_disconnect(void); + +/** + * @brief Currently this API is just an stub API + * + + * @return + * - ESP_OK: succeed + * - others: fail + */ +esp_err_t esp_wifi_clear_fast_connect(void); + +/** + * @brief deauthenticate all stations or associated id equals to aid + * + * @param aid when aid is 0, deauthenticate all stations, otherwise deauthenticate station whose associated id is aid + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + * - ESP_ERR_WIFI_NOT_STARTED: WiFi was not started by esp_wifi_start + * - ESP_ERR_INVALID_ARG: invalid argument + * - ESP_ERR_WIFI_MODE: WiFi mode is wrong + */ +esp_err_t esp_wifi_deauth_sta(uint16_t aid); + +/** + * @brief Scan all available APs. + * + * @attention If this API is called, the found APs are stored in WiFi driver dynamic allocated memory. And then + * can be freed in esp_wifi_scan_get_ap_records(), esp_wifi_scan_get_ap_record() or esp_wifi_clear_ap_list(), + * so call any one to free the memory once the scan is done. + * @attention The values of maximum active scan time and passive scan time per channel are limited to 1500 milliseconds. + * Values above 1500ms may cause station to disconnect from AP and are not recommended. + * + * @param config configuration settings for scanning, if set to NULL default settings will be used + * of which default values are show_hidden:false, scan_type:active, scan_time.active.min:0, + * scan_time.active.max:120 miliseconds, scan_time.passive:360 miliseconds + * + * @param block if block is true, this API will block the caller until the scan is done, otherwise + * it will return immediately + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + * - ESP_ERR_WIFI_NOT_STARTED: WiFi was not started by esp_wifi_start + * - ESP_ERR_WIFI_TIMEOUT: blocking scan is timeout + * - ESP_ERR_WIFI_STATE: wifi still connecting when invoke esp_wifi_scan_start + * - others: refer to error code in esp_err.h + */ +esp_err_t esp_wifi_scan_start(const wifi_scan_config_t *config, bool block); + +/** + * @brief Stop the scan in process + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + * - ESP_ERR_WIFI_NOT_STARTED: WiFi is not started by esp_wifi_start + */ +esp_err_t esp_wifi_scan_stop(void); + +/** + * @brief Get number of APs found in last scan + * + * @param[out] number store number of APs found in last scan + * + * @attention This API can only be called when the scan is completed, otherwise it may get wrong value. + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + * - ESP_ERR_WIFI_NOT_STARTED: WiFi is not started by esp_wifi_start + * - ESP_ERR_INVALID_ARG: invalid argument + */ +esp_err_t esp_wifi_scan_get_ap_num(uint16_t *number); + +/** + * @brief Get AP list found in last scan. + * + * @attention This API will free all memory occupied by scanned AP list. + * + * @param[inout] number As input param, it stores max AP number ap_records can hold. + * As output param, it receives the actual AP number this API returns. + * @param ap_records wifi_ap_record_t array to hold the found APs + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + * - ESP_ERR_WIFI_NOT_STARTED: WiFi is not started by esp_wifi_start + * - ESP_ERR_INVALID_ARG: invalid argument + * - ESP_ERR_NO_MEM: out of memory + */ +esp_err_t esp_wifi_scan_get_ap_records(uint16_t *number, wifi_ap_record_t *ap_records); + +/** + * @brief Get one AP record from the scanned AP list. + * + * @attention Different from esp_wifi_scan_get_ap_records(), this API only gets one AP record + * from the scanned AP list each time. This API will free the memory of one AP record, + * if the user doesn't get all records in the scannned AP list, then needs to call esp_wifi_clear_ap_list() + * to free the remaining memory. + * + * @param[out] ap_record pointer to one AP record + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + * - ESP_ERR_WIFI_NOT_STARTED: WiFi is not started by esp_wifi_start + * - ESP_ERR_INVALID_ARG: invalid argument + * - ESP_FAIL: scan APs is NULL, means all AP records fetched or no AP found + */ +esp_err_t esp_wifi_scan_get_ap_record(wifi_ap_record_t *ap_record); + +/** + * @brief Clear AP list found in last scan + * + * @attention This API will free all memory occupied by scanned AP list. + * When the obtained AP list fails, AP records must be cleared,otherwise it may cause memory leakage. + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + * - ESP_ERR_WIFI_NOT_STARTED: WiFi is not started by esp_wifi_start + * - ESP_ERR_WIFI_MODE: WiFi mode is wrong + * - ESP_ERR_INVALID_ARG: invalid argument + */ +esp_err_t esp_wifi_clear_ap_list(void); + + +/** + * @brief Get information of AP to which the device is associated with + * + * @attention When the obtained country information is empty, it means that the AP does not carry country information + * + * @param ap_info the wifi_ap_record_t to hold AP information + * sta can get the connected ap's phy mode info through the struct member + * phy_11b，phy_11g，phy_11n，phy_lr in the wifi_ap_record_t struct. + * For example, phy_11b = 1 imply that ap support 802.11b mode + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_CONN: The station interface don't initialized + * - ESP_ERR_WIFI_NOT_CONNECT: The station is in disconnect status + */ +esp_err_t esp_wifi_sta_get_ap_info(wifi_ap_record_t *ap_info); + +/** + * @brief Set current WiFi power save type + * + * @attention Default power save type is WIFI_PS_MIN_MODEM. + * + * @param type power save type + * + * @return ESP_OK: succeed + */ +esp_err_t esp_wifi_set_ps(wifi_ps_type_t type); + +/** + * @brief Get current WiFi power save type + * + * @attention Default power save type is WIFI_PS_MIN_MODEM. + * + * @param[out] type: store current power save type + * + * @return ESP_OK: succeed + */ +esp_err_t esp_wifi_get_ps(wifi_ps_type_t *type); + +/** + * @brief Set protocol type of specified interface + * The default protocol is (WIFI_PROTOCOL_11B|WIFI_PROTOCOL_11G|WIFI_PROTOCOL_11N). + * if CONFIG_SOC_WIFI_HE_SUPPORT, the default protocol is (WIFI_PROTOCOL_11B|WIFI_PROTOCOL_11G|WIFI_PROTOCOL_11N|WIFI_PROTOCOL_11AX). + * + * @attention Support 802.11b or 802.11bg or 802.11bgn or 802.11bgnax or LR mode + * + * @param ifx interfaces + * @param protocol_bitmap WiFi protocol bitmap + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + * - ESP_ERR_WIFI_IF: invalid interface + * - others: refer to error codes in esp_err.h + */ +esp_err_t esp_wifi_set_protocol(wifi_interface_t ifx, uint8_t protocol_bitmap); + +/** + * @brief Get the current protocol bitmap of the specified interface + * + * @param ifx interface + * @param[out] protocol_bitmap store current WiFi protocol bitmap of interface ifx + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + * - ESP_ERR_WIFI_IF: invalid interface + * - ESP_ERR_INVALID_ARG: invalid argument + * - others: refer to error codes in esp_err.h + */ +esp_err_t esp_wifi_get_protocol(wifi_interface_t ifx, uint8_t *protocol_bitmap); + +/** + * @brief Set the bandwidth of specified interface + * + * @attention 1. API return false if try to configure an interface that is not enabled + * @attention 2. WIFI_BW_HT40 is supported only when the interface support 11N + * + * @param ifx interface to be configured + * @param bw bandwidth + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + * - ESP_ERR_WIFI_IF: invalid interface + * - ESP_ERR_INVALID_ARG: invalid argument + * - others: refer to error codes in esp_err.h + */ +esp_err_t esp_wifi_set_bandwidth(wifi_interface_t ifx, wifi_bandwidth_t bw); + +/** + * @brief Get the bandwidth of specified interface + * + * @attention 1. API return false if try to get a interface that is not enable + * + * @param ifx interface to be configured + * @param[out] bw store bandwidth of interface ifx + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + * - ESP_ERR_WIFI_IF: invalid interface + * - ESP_ERR_INVALID_ARG: invalid argument + */ +esp_err_t esp_wifi_get_bandwidth(wifi_interface_t ifx, wifi_bandwidth_t *bw); + +/** + * @brief Set primary/secondary channel of device + * + * @attention 1. This API should be called after esp_wifi_start() and before esp_wifi_stop() + * @attention 2. When device is in STA mode, this API should not be called when STA is scanning or connecting to an external AP + * @attention 3. When device is in softAP mode, this API should not be called when softAP has connected to external STAs + * @attention 4. When device is in STA+softAP mode, this API should not be called when in the scenarios described above + * @attention 5. The channel info set by this API will not be stored in NVS. So If you want to remeber the channel used before wifi stop, + * you need to call this API again after wifi start, or you can call `esp_wifi_set_config()` to store the channel info in NVS. + * + * @param primary for HT20, primary is the channel number, for HT40, primary is the primary channel + * @param second for HT20, second is ignored, for HT40, second is the second channel + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + * - ESP_ERR_WIFI_IF: invalid interface + * - ESP_ERR_INVALID_ARG: invalid argument + * - ESP_ERR_WIFI_NOT_STARTED: WiFi is not started by esp_wifi_start + */ +esp_err_t esp_wifi_set_channel(uint8_t primary, wifi_second_chan_t second); + +/** + * @brief Get the primary/secondary channel of device + * + * @attention 1. API return false if try to get a interface that is not enable + * + * @param primary store current primary channel + * @param[out] second store current second channel + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + * - ESP_ERR_INVALID_ARG: invalid argument + */ +esp_err_t esp_wifi_get_channel(uint8_t *primary, wifi_second_chan_t *second); + +/** + * @brief configure country info + * + * @attention 1. It is discouraged to call this API since this doesn't validate the per-country rules, + * it's up to the user to fill in all fields according to local regulations. + * Please use esp_wifi_set_country_code instead. + * @attention 2. The default country is "01" (world safe mode) {.cc="01", .schan=1, .nchan=11, .policy=WIFI_COUNTRY_POLICY_AUTO}. + * @attention 3. The third octet of country code string is one of the following: ' ', 'O', 'I', 'X', otherwise it is considered as ' '. + * @attention 4. When the country policy is WIFI_COUNTRY_POLICY_AUTO, the country info of the AP to which + * the station is connected is used. E.g. if the configured country info is {.cc="US", .schan=1, .nchan=11} + * and the country info of the AP to which the station is connected is {.cc="JP", .schan=1, .nchan=14} + * then the country info that will be used is {.cc="JP", .schan=1, .nchan=14}. If the station disconnected + * from the AP the country info is set back to the country info of the station automatically, + * {.cc="US", .schan=1, .nchan=11} in the example. + * @attention 5. When the country policy is WIFI_COUNTRY_POLICY_MANUAL, then the configured country info is used always. + * @attention 6. When the country info is changed because of configuration or because the station connects to a different + * external AP, the country IE in probe response/beacon of the soft-AP is also changed. + * @attention 7. The country configuration is stored into flash. + * @attention 8. When this API is called, the PHY init data will switch to the PHY init data type corresponding to the + * country info. + * + * @param country the configured country info + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + * - ESP_ERR_INVALID_ARG: invalid argument + */ +esp_err_t esp_wifi_set_country(const wifi_country_t *country); + +/** + * @brief get the current country info + * + * @param country country info + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + * - ESP_ERR_INVALID_ARG: invalid argument + */ +esp_err_t esp_wifi_get_country(wifi_country_t *country); + + +/** + * @brief Set MAC address of WiFi station, soft-AP or NAN interface. + * + * @attention 1. This API can only be called when the interface is disabled + * @attention 2. Above mentioned interfaces have different MAC addresses, do not set them to be the same. + * @attention 3. The bit 0 of the first byte of MAC address can not be 1. For example, the MAC address + * can set to be "1a:XX:XX:XX:XX:XX", but can not be "15:XX:XX:XX:XX:XX". + * + * @param ifx interface + * @param mac the MAC address + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + * - ESP_ERR_INVALID_ARG: invalid argument + * - ESP_ERR_WIFI_IF: invalid interface + * - ESP_ERR_WIFI_MAC: invalid mac address + * - ESP_ERR_WIFI_MODE: WiFi mode is wrong + * - others: refer to error codes in esp_err.h + */ +esp_err_t esp_wifi_set_mac(wifi_interface_t ifx, const uint8_t mac[6]); + +/** + * @brief Get mac of specified interface + * + * @param ifx interface + * @param[out] mac store mac of the interface ifx + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + * - ESP_ERR_INVALID_ARG: invalid argument + * - ESP_ERR_WIFI_IF: invalid interface + */ +esp_err_t esp_wifi_get_mac(wifi_interface_t ifx, uint8_t mac[6]); + +/** + * @brief The RX callback function in the promiscuous mode. + * Each time a packet is received, the callback function will be called. + * + * @param buf Data received. Type of data in buffer (wifi_promiscuous_pkt_t or wifi_pkt_rx_ctrl_t) indicated by 'type' parameter. + * @param type promiscuous packet type. + * + */ +typedef void (* wifi_promiscuous_cb_t)(void *buf, wifi_promiscuous_pkt_type_t type); + +/** + * @brief Register the RX callback function in the promiscuous mode. + * + * Each time a packet is received, the registered callback function will be called. + * + * @param cb callback + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + */ +esp_err_t esp_wifi_set_promiscuous_rx_cb(wifi_promiscuous_cb_t cb); + +/** + * @brief Enable the promiscuous mode. + * + * @param en false - disable, true - enable + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + */ +esp_err_t esp_wifi_set_promiscuous(bool en); + +/** + * @brief Get the promiscuous mode. + * + * @param[out] en store the current status of promiscuous mode + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + * - ESP_ERR_INVALID_ARG: invalid argument + */ +esp_err_t esp_wifi_get_promiscuous(bool *en); + +/** + * @brief Enable the promiscuous mode packet type filter. + * + * @note The default filter is to filter all packets except WIFI_PKT_MISC + * + * @param filter the packet type filtered in promiscuous mode. + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + */ +esp_err_t esp_wifi_set_promiscuous_filter(const wifi_promiscuous_filter_t *filter); + +/** + * @brief Get the promiscuous filter. + * + * @param[out] filter store the current status of promiscuous filter + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + * - ESP_ERR_INVALID_ARG: invalid argument + */ +esp_err_t esp_wifi_get_promiscuous_filter(wifi_promiscuous_filter_t *filter); + +/** + * @brief Enable subtype filter of the control packet in promiscuous mode. + * + * @note The default filter is to filter none control packet. + * + * @param filter the subtype of the control packet filtered in promiscuous mode. + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + */ +esp_err_t esp_wifi_set_promiscuous_ctrl_filter(const wifi_promiscuous_filter_t *filter); + +/** + * @brief Get the subtype filter of the control packet in promiscuous mode. + * + * @param[out] filter store the current status of subtype filter of the control packet in promiscuous mode + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + * - ESP_ERR_INVALID_ARG: invalid argument + */ +esp_err_t esp_wifi_get_promiscuous_ctrl_filter(wifi_promiscuous_filter_t *filter); + +/** + * @brief Set the configuration of the STA, AP or NAN + * + * @attention 1. This API can be called only when specified interface is enabled, otherwise, API fail + * @attention 2. For station configuration, bssid_set needs to be 0; and it needs to be 1 only when users need to check the MAC address of the AP. + * @attention 3. ESP devices are limited to only one channel, so when in the soft-AP+station mode, the soft-AP will adjust its channel automatically to be the same as + * the channel of the station. + * @attention 4. The configuration will be stored in NVS for station and soft-AP + * + * @param interface interface + * @param conf station, soft-AP or NAN configuration + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + * - ESP_ERR_INVALID_ARG: invalid argument + * - ESP_ERR_WIFI_IF: invalid interface + * - ESP_ERR_WIFI_MODE: invalid mode + * - ESP_ERR_WIFI_PASSWORD: invalid password + * - ESP_ERR_WIFI_NVS: WiFi internal NVS error + * - others: refer to the error code in esp_err.h + */ +esp_err_t esp_wifi_set_config(wifi_interface_t interface, wifi_config_t *conf); + +/** + * @brief Get configuration of specified interface + * + * @param interface interface + * @param[out] conf station or soft-AP configuration + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + * - ESP_ERR_INVALID_ARG: invalid argument + * - ESP_ERR_WIFI_IF: invalid interface + */ +esp_err_t esp_wifi_get_config(wifi_interface_t interface, wifi_config_t *conf); + +/** + * @brief Get STAs associated with soft-AP + * + * @attention SSC only API + * + * @param[out] sta station list + * ap can get the connected sta's phy mode info through the struct member + * phy_11b，phy_11g，phy_11n，phy_lr in the wifi_sta_info_t struct. + * For example, phy_11b = 1 imply that sta support 802.11b mode + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + * - ESP_ERR_INVALID_ARG: invalid argument + * - ESP_ERR_WIFI_MODE: WiFi mode is wrong + * - ESP_ERR_WIFI_CONN: WiFi internal error, the station/soft-AP control block is invalid + */ +esp_err_t esp_wifi_ap_get_sta_list(wifi_sta_list_t *sta); + +/** + * @brief Get AID of STA connected with soft-AP + * + * @param mac STA's mac address + * @param[out] aid Store the AID corresponding to STA mac + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + * - ESP_ERR_INVALID_ARG: invalid argument + * - ESP_ERR_NOT_FOUND: Requested resource not found + * - ESP_ERR_WIFI_MODE: WiFi mode is wrong + * - ESP_ERR_WIFI_CONN: WiFi internal error, the station/soft-AP control block is invalid + */ +esp_err_t esp_wifi_ap_get_sta_aid(const uint8_t mac[6], uint16_t *aid); + +/** + * @brief Set the WiFi API configuration storage type + * + * @attention 1. The default value is WIFI_STORAGE_FLASH + * + * @param storage : storage type + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + * - ESP_ERR_INVALID_ARG: invalid argument + */ +esp_err_t esp_wifi_set_storage(wifi_storage_t storage); + +/** + * @brief Function signature for received Vendor-Specific Information Element callback. + * @param ctx Context argument, as passed to esp_wifi_set_vendor_ie_cb() when registering callback. + * @param type Information element type, based on frame type received. + * @param sa Source 802.11 address. + * @param vnd_ie Pointer to the vendor specific element data received. + * @param rssi Received signal strength indication. + */ +typedef void (*esp_vendor_ie_cb_t) (void *ctx, wifi_vendor_ie_type_t type, const uint8_t sa[6], const vendor_ie_data_t *vnd_ie, int rssi); + +/** + * @brief Set 802.11 Vendor-Specific Information Element + * + * @param enable If true, specified IE is enabled. If false, specified IE is removed. + * @param type Information Element type. Determines the frame type to associate with the IE. + * @param idx Index to set or clear. Each IE type can be associated with up to two elements (indices 0 & 1). + * @param vnd_ie Pointer to vendor specific element data. First 6 bytes should be a header with fields matching vendor_ie_data_t. + * If enable is false, this argument is ignored and can be NULL. Data does not need to remain valid after the function returns. + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init() + * - ESP_ERR_INVALID_ARG: Invalid argument, including if first byte of vnd_ie is not WIFI_VENDOR_IE_ELEMENT_ID (0xDD) + * or second byte is an invalid length. + * - ESP_ERR_NO_MEM: Out of memory + */ +esp_err_t esp_wifi_set_vendor_ie(bool enable, wifi_vendor_ie_type_t type, wifi_vendor_ie_id_t idx, const void *vnd_ie); + +/** + * @brief Register Vendor-Specific Information Element monitoring callback. + * + * @param cb Callback function + * @param ctx Context argument, passed to callback function. + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + */ +esp_err_t esp_wifi_set_vendor_ie_cb(esp_vendor_ie_cb_t cb, void *ctx); + +/** + * @brief Set maximum transmitting power after WiFi start. + * + * @attention 1. Maximum power before wifi startup is limited by PHY init data bin. + * @attention 2. The value set by this API will be mapped to the max_tx_power of the structure wifi_country_t variable. + * @attention 3. Mapping Table {Power, max_tx_power} = {{8, 2}, {20, 5}, {28, 7}, {34, 8}, {44, 11}, + * {52, 13}, {56, 14}, {60, 15}, {66, 16}, {72, 18}, {80, 20}}. + * @attention 4. Param power unit is 0.25dBm, range is [8, 84] corresponding to 2dBm - 20dBm. + * @attention 5. Relationship between set value and actual value. As follows: {set value range, actual value} = {{[8, 19],8}, {[20, 27],20}, {[28, 33],28}, {[34, 43],34}, {[44, 51],44}, {[52, 55],52}, {[56, 59],56}, {[60, 65],60}, {[66, 71],66}, {[72, 79],72}, {[80, 84],80}}. + * + * @param power Maximum WiFi transmitting power. + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + * - ESP_ERR_WIFI_NOT_STARTED: WiFi is not started by esp_wifi_start + * - ESP_ERR_INVALID_ARG: invalid argument, e.g. parameter is out of range + */ +esp_err_t esp_wifi_set_max_tx_power(int8_t power); + +/** + * @brief Get maximum transmiting power after WiFi start + * + * @param power Maximum WiFi transmitting power, unit is 0.25dBm. + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + * - ESP_ERR_WIFI_NOT_STARTED: WiFi is not started by esp_wifi_start + * - ESP_ERR_INVALID_ARG: invalid argument + */ +esp_err_t esp_wifi_get_max_tx_power(int8_t *power); + +/** + * @brief Set mask to enable or disable some WiFi events + * + * @attention 1. Mask can be created by logical OR of various WIFI_EVENT_MASK_ constants. + * Events which have corresponding bit set in the mask will not be delivered to the system event handler. + * @attention 2. Default WiFi event mask is WIFI_EVENT_MASK_AP_PROBEREQRECVED. + * @attention 3. There may be lots of stations sending probe request data around. + * Don't unmask this event unless you need to receive probe request data. + * + * @param mask WiFi event mask. + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + */ +esp_err_t esp_wifi_set_event_mask(uint32_t mask); + +/** + * @brief Get mask of WiFi events + * + * @param mask WiFi event mask. + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + * - ESP_ERR_INVALID_ARG: invalid argument + */ +esp_err_t esp_wifi_get_event_mask(uint32_t *mask); + +/** + * @brief Send raw ieee80211 data + * + * @attention Currently only support for sending beacon/probe request/probe response/action and non-QoS + * data frame + * + * @param ifx interface if the Wi-Fi mode is Station, the ifx should be WIFI_IF_STA. If the Wi-Fi + * mode is SoftAP, the ifx should be WIFI_IF_AP. If the Wi-Fi mode is Station+SoftAP, the + * ifx should be WIFI_IF_STA or WIFI_IF_AP. If the ifx is wrong, the API returns ESP_ERR_WIFI_IF. + * @param buffer raw ieee80211 buffer + * @param len the length of raw buffer, the len must be <= 1500 Bytes and >= 24 Bytes + * @param en_sys_seq indicate whether use the internal sequence number. If en_sys_seq is false, the + * sequence in raw buffer is unchanged, otherwise it will be overwritten by WiFi driver with + * the system sequence number. + * Generally, if esp_wifi_80211_tx is called before the Wi-Fi connection has been set up, both + * en_sys_seq==true and en_sys_seq==false are fine. However, if the API is called after the Wi-Fi + * connection has been set up, en_sys_seq must be true, otherwise ESP_ERR_INVALID_ARG is returned. + * + * @return + * - ESP_OK: success + * - ESP_ERR_WIFI_IF: Invalid interface + * - ESP_ERR_INVALID_ARG: Invalid parameter + * - ESP_ERR_WIFI_NO_MEM: out of memory + */ + +esp_err_t esp_wifi_80211_tx(wifi_interface_t ifx, const void *buffer, int len, bool en_sys_seq); + +/** + * @brief The RX callback function of Channel State Information(CSI) data. + * + * Each time a CSI data is received, the callback function will be called. + * + * @param ctx context argument, passed to esp_wifi_set_csi_rx_cb() when registering callback function. + * @param data CSI data received. The memory that it points to will be deallocated after callback function returns. + * + */ +typedef void (* wifi_csi_cb_t)(void *ctx, wifi_csi_info_t *data); + + +/** + * @brief Register the RX callback function of CSI data. + * + * Each time a CSI data is received, the callback function will be called. + * + * @param cb callback + * @param ctx context argument, passed to callback function + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + */ + +esp_err_t esp_wifi_set_csi_rx_cb(wifi_csi_cb_t cb, void *ctx); + +/** + * @brief Set CSI data configuration + * + * @param config configuration + * + * return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + * - ESP_ERR_WIFI_NOT_STARTED: WiFi is not started by esp_wifi_start or promiscuous mode is not enabled + * - ESP_ERR_INVALID_ARG: invalid argument + */ +esp_err_t esp_wifi_set_csi_config(const wifi_csi_config_t *config); + +/** + * @brief Enable or disable CSI + * + * @param en true - enable, false - disable + * + * return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + * - ESP_ERR_WIFI_NOT_STARTED: WiFi is not started by esp_wifi_start or promiscuous mode is not enabled + * - ESP_ERR_INVALID_ARG: invalid argument + */ +esp_err_t esp_wifi_set_csi(bool en); + +/** + * @brief Set antenna GPIO configuration + * + * @param config Antenna GPIO configuration. + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + * - ESP_ERR_INVALID_ARG: Invalid argument, e.g. parameter is NULL, invalid GPIO number etc + */ +esp_err_t esp_wifi_set_ant_gpio(const wifi_ant_gpio_config_t *config); + +/** + * @brief Get current antenna GPIO configuration + * + * @param config Antenna GPIO configuration. + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + * - ESP_ERR_INVALID_ARG: invalid argument, e.g. parameter is NULL + */ +esp_err_t esp_wifi_get_ant_gpio(wifi_ant_gpio_config_t *config); + + +/** + * @brief Set antenna configuration + * + * @param config Antenna configuration. + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + * - ESP_ERR_INVALID_ARG: Invalid argument, e.g. parameter is NULL, invalid antenna mode or invalid GPIO number + */ +esp_err_t esp_wifi_set_ant(const wifi_ant_config_t *config); + +/** + * @brief Get current antenna configuration + * + * @param config Antenna configuration. + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + * - ESP_ERR_INVALID_ARG: invalid argument, e.g. parameter is NULL + */ +esp_err_t esp_wifi_get_ant(wifi_ant_config_t *config); + +/** + * @brief Get the TSF time + * In Station mode or SoftAP+Station mode if station is not connected or station doesn't receive at least + * one beacon after connected, will return 0 + * + * @attention Enabling power save may cause the return value inaccurate, except WiFi modem sleep + * + * @param interface The interface whose tsf_time is to be retrieved. + * + * @return 0 or the TSF time + */ +int64_t esp_wifi_get_tsf_time(wifi_interface_t interface); + +/** + * @brief Set the inactive time of the STA or AP + * + * @attention 1. For Station, If the station does not receive a beacon frame from the connected SoftAP during the inactive time, + * disconnect from SoftAP. Default 6s. + * @attention 2. For SoftAP, If the softAP doesn't receive any data from the connected STA during inactive time, + * the softAP will force deauth the STA. Default is 300s. + * @attention 3. The inactive time configuration is not stored into flash + * + * @param ifx interface to be configured. + * @param sec Inactive time. Unit seconds. + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + * - ESP_ERR_WIFI_NOT_STARTED: WiFi is not started by esp_wifi_start + * - ESP_ERR_INVALID_ARG: invalid argument, For Station, if sec is less than 3. For SoftAP, if sec is less than 10. + */ +esp_err_t esp_wifi_set_inactive_time(wifi_interface_t ifx, uint16_t sec); + +/** + * @brief Get inactive time of specified interface + * + * @param ifx Interface to be configured. + * @param sec Inactive time. Unit seconds. + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + * - ESP_ERR_WIFI_NOT_STARTED: WiFi is not started by esp_wifi_start + * - ESP_ERR_INVALID_ARG: invalid argument + */ +esp_err_t esp_wifi_get_inactive_time(wifi_interface_t ifx, uint16_t *sec); + +/** + * @brief Dump WiFi statistics + * + * @param modules statistic modules to be dumped + * + * @return + * - ESP_OK: succeed + * - others: failed + */ +esp_err_t esp_wifi_statis_dump(uint32_t modules); + +/** + * @brief Set RSSI threshold, if average rssi gets lower than threshold, WiFi task will post event WIFI_EVENT_STA_BSS_RSSI_LOW. + * + * @attention If the user wants to receive another WIFI_EVENT_STA_BSS_RSSI_LOW event after receiving one, this API needs to be + * called again with an updated/same RSSI threshold. + * + * @param rssi threshold value in dbm between -100 to 10 + * Note that in some rare cases where signal strength is very strong, rssi values can be slightly positive. + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + * - ESP_ERR_INVALID_ARG: invalid argument + */ +esp_err_t esp_wifi_set_rssi_threshold(int32_t rssi); + +/** + * @brief Start an FTM Initiator session by sending FTM request + * If successful, event WIFI_EVENT_FTM_REPORT is generated with the result of the FTM procedure + * + * @attention 1. Use this API only in Station mode. + * @attention 2. If FTM is initiated on a different channel than Station is connected in or internal SoftAP is started in, + * FTM defaults to a single burst in ASAP mode. + * + * @param cfg FTM Initiator session configuration + * + * @return + * - ESP_OK: succeed + * - others: failed + */ +esp_err_t esp_wifi_ftm_initiate_session(wifi_ftm_initiator_cfg_t *cfg); + +/** + * @brief End the ongoing FTM Initiator session + * + * @attention This API works only on FTM Initiator + * + * @return + * - ESP_OK: succeed + * - others: failed + */ +esp_err_t esp_wifi_ftm_end_session(void); + +/** + * @brief Set offset in cm for FTM Responder. An equivalent offset is calculated in picoseconds + * and added in TOD of FTM Measurement frame (T1). + * + * @attention Use this API only in AP mode before performing FTM as responder + * + * @param offset_cm T1 Offset to be added in centimeters + * + * @return + * - ESP_OK: succeed + * - others: failed + */ +esp_err_t esp_wifi_ftm_resp_set_offset(int16_t offset_cm); + +/** + * @brief Enable or disable 11b rate of specified interface + * + * @attention 1. This API should be called after esp_wifi_init() and before esp_wifi_start(). + * @attention 2. Only when really need to disable 11b rate call this API otherwise don't call this. + * + * @param ifx Interface to be configured. + * @param disable true means disable 11b rate while false means enable 11b rate. + * + * @return + * - ESP_OK: succeed + * - others: failed + */ +esp_err_t esp_wifi_config_11b_rate(wifi_interface_t ifx, bool disable); + +#define ESP_WIFI_CONNECTIONLESS_INTERVAL_DEFAULT_MODE 0 +/** + * @brief Set wake interval for connectionless modules to wake up periodically. + * + * @attention 1. Only one wake interval for all connectionless modules. + * @attention 2. This configuration could work at connected status. + * When ESP_WIFI_STA_DISCONNECTED_PM_ENABLE is enabled, this configuration could work at disconnected status. + * @attention 3. Event WIFI_EVENT_CONNECTIONLESS_MODULE_WAKE_INTERVAL_START would be posted each time wake interval starts. + * @attention 4. Recommend to configure interval in multiples of hundred. (e.g. 100ms) + * @attention 5. Recommend to configure interval to ESP_WIFI_CONNECTIONLESS_INTERVAL_DEFAULT_MODE to get stable performance at coexistence mode. + * + * @param wake_interval Milliseconds after would the chip wake up, from 1 to 65535. + */ +esp_err_t esp_wifi_connectionless_module_set_wake_interval(uint16_t wake_interval); + +/** + * @brief Request extra reference of Wi-Fi radio. + * Wi-Fi keep active state(RF opened) to be able to receive packets. + * + * @attention Please pair the use of `esp_wifi_force_wakeup_acquire` with `esp_wifi_force_wakeup_release`. + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + * - ESP_ERR_WIFI_NOT_STARTED: WiFi is not started by esp_wifi_start + */ +esp_err_t esp_wifi_force_wakeup_acquire(void); + +/** + * @brief Release extra reference of Wi-Fi radio. + * Wi-Fi go to sleep state(RF closed) if no more use of radio. + * + * @attention Please pair the use of `esp_wifi_force_wakeup_acquire` with `esp_wifi_force_wakeup_release`. + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + * - ESP_ERR_WIFI_NOT_STARTED: WiFi is not started by esp_wifi_start + */ +esp_err_t esp_wifi_force_wakeup_release(void); + +/** + * @brief configure country + * + * @attention 1. When ieee80211d_enabled, the country info of the AP to which + * the station is connected is used. E.g. if the configured country is US + * and the country info of the AP to which the station is connected is JP + * then the country info that will be used is JP. If the station disconnected + * from the AP the country info is set back to the country info of the station automatically, + * US in the example. + * @attention 2. When ieee80211d_enabled is disabled, then the configured country info is used always. + * @attention 3. When the country info is changed because of configuration or because the station connects to a different + * external AP, the country IE in probe response/beacon of the soft-AP is also changed. + * @attention 4. The country configuration is stored into flash. + * @attention 5. When this API is called, the PHY init data will switch to the PHY init data type corresponding to the + * country info. + * @attention 6. Supported country codes are "01"(world safe mode) "AT","AU","BE","BG","BR", + * "CA","CH","CN","CY","CZ","DE","DK","EE","ES","FI","FR","GB","GR","HK","HR","HU", + * "IE","IN","IS","IT","JP","KR","LI","LT","LU","LV","MT","MX","NL","NO","NZ","PL","PT", + * "RO","SE","SI","SK","TW","US" + * + * @attention 7. When country code "01" (world safe mode) is set, SoftAP mode won't contain country IE. + * @attention 8. The default country is "01" (world safe mode) and ieee80211d_enabled is TRUE. + * @attention 9. The third octet of country code string is one of the following: ' ', 'O', 'I', 'X', otherwise it is considered as ' '. + * + * @param country the configured country ISO code + * @param ieee80211d_enabled 802.11d is enabled or not + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + * - ESP_ERR_INVALID_ARG: invalid argument + */ +esp_err_t esp_wifi_set_country_code(const char *country, bool ieee80211d_enabled); + +/** + * @brief get the current country code + * + * @param country country code + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + * - ESP_ERR_INVALID_ARG: invalid argument + */ +esp_err_t esp_wifi_get_country_code(char *country); + +/** + * @brief Config 80211 tx rate of specified interface + * + * @attention 1. This API should be called after esp_wifi_init() and before esp_wifi_start(). + * + * @param ifx Interface to be configured. + * @param rate Phy rate to be configured. + * + * @return + * - ESP_OK: succeed + * - others: failed + */ +esp_err_t esp_wifi_config_80211_tx_rate(wifi_interface_t ifx, wifi_phy_rate_t rate); + +/** + * @brief Disable PMF configuration for specified interface + * + * @attention This API should be called after esp_wifi_set_config() and before esp_wifi_start(). + * + * @param ifx Interface to be configured. + * + * @return + * - ESP_OK: succeed + * - others: failed + */ +esp_err_t esp_wifi_disable_pmf_config(wifi_interface_t ifx); + +/** + * @brief Get the Association id assigned to STA by AP + * + * @param[out] aid store the aid + * + * @attention aid = 0 if station is not connected to AP. + * + * @return + * - ESP_OK: succeed + */ +esp_err_t esp_wifi_sta_get_aid(uint16_t *aid); + +/** + * @brief Get the negotiated phymode after connection. + * + * @param[out] phymode store the negotiated phymode. + * + * @return + * - ESP_OK: succeed + */ +esp_err_t esp_wifi_sta_get_negotiated_phymode(wifi_phy_mode_t *phymode); + +/** + * @brief Config dynamic carrier sense + * + * @attention This API should be called after esp_wifi_start(). + * + * @param enabled Dynamic carrier sense is enabled or not. + * + * @return + * - ESP_OK: succeed + * - others: failed + */ +esp_err_t esp_wifi_set_dynamic_cs(bool enabled); + +/** + * @brief Get the rssi info after station connected to AP + * + * @attention This API should be called after station connected to AP. + * + * @param rssi store the rssi info received from last beacon. + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_INVALID_ARG: invalid argument + * - ESP_FAIL: failed + */ +esp_err_t esp_wifi_sta_get_rssi(int *rssi); + +#ifdef __cplusplus +} +#endif + +#endif /* __ESP_WIFI_H__ */ diff --git a/espradio/blobs/headers/esp_wifi_crypto_types.h b/espradio/blobs/headers/esp_wifi_crypto_types.h new file mode 100644 index 000000000..6b41cc524 --- /dev/null +++ b/espradio/blobs/headers/esp_wifi_crypto_types.h @@ -0,0 +1,441 @@ +/* + * SPDX-FileCopyrightText: 2017-2023 Espressif Systems (Shanghai) CO LTD + * + * SPDX-License-Identifier: Apache-2.0 + */ + + +#ifndef __ESP_WIFI_CRYPTO_TYPES_H__ +#define __ESP_WIFI_CRYPTO_TYPES_H__ + +/* This is an internal API header for configuring the implementation used for WiFi cryptographic + operations. + + During normal operation, you don't need to use any of these types or functions in this header. + See esp_wifi.h & esp_wifi_types.h instead. +*/ +#include +#include +#include + +#ifdef __cplusplus +extern "C" { +#endif + +#define ESP_WIFI_CRYPTO_VERSION 0x00000001 + +/* + * Enumeration for hash operations. + * When WPA2 is connecting, this enum is used to + * request a hash algorithm via crypto_hash_xxx functions. + */ +typedef enum { + ESP_CRYPTO_HASH_ALG_MD5, ESP_CRYPTO_HASH_ALG_SHA1, + ESP_CRYPTO_HASH_ALG_HMAC_MD5, ESP_CRYPTO_HASH_ALG_HMAC_SHA1, + ESP_CRYPTO_HASH_ALG_SHA256, ESP_CRYPTO_HASH_ALG_HMAC_SHA256 +}esp_crypto_hash_alg_t; + +/* + * Enumeration for block cipher operations. + * When WPA2 is connecting, this enum is used to request a block + * cipher algorithm via crypto_cipher_xxx functions. + */ +typedef enum { + ESP_CRYPTO_CIPHER_NULL, ESP_CRYPTO_CIPHER_ALG_AES, ESP_CRYPTO_CIPHER_ALG_3DES, + ESP_CRYPTO_CIPHER_ALG_DES, ESP_CRYPTO_CIPHER_ALG_RC2, ESP_CRYPTO_CIPHER_ALG_RC4 +} esp_crypto_cipher_alg_t; + +/* + * This structure is about the algorithm when do crypto_hash operation, for detail, + * please reference to the structure crypto_hash. + */ +typedef struct crypto_hash esp_crypto_hash_t; + +/* + * This structure is about the algorithm when do crypto_cipher operation, for detail, + * please reference to the structure crypto_cipher. + */ +typedef struct crypto_cipher esp_crypto_cipher_t; + +/** + * @brief The AES 128 encrypt callback function used by esp_wifi. + * + * @param key Encryption key. + * @param iv Encryption IV for CBC mode (16 bytes). + * @param data Data to encrypt in-place. + * @param data_len Length of data in bytes (must be divisible by 16) + */ +typedef int (*esp_aes_128_encrypt_t)(const unsigned char *key, const unsigned char *iv, unsigned char *data, int data_len); + +/** + * @brief The AES 128 decrypt callback function used by esp_wifi. + * + * @param key Decryption key. + * @param iv Decryption IV for CBC mode (16 bytes). + * @param data Data to decrypt in-place. + * @param data_len Length of data in bytes (must be divisible by 16) + * + */ +typedef int (*esp_aes_128_decrypt_t)(const unsigned char *key, const unsigned char *iv, unsigned char *data, int data_len); + +/** + * @brief The AES wrap callback function used by esp_wifi. + * + * @param kek 16-octet Key encryption key (KEK). + * @param n Length of the plaintext key in 64-bit units; + * @param plain Plaintext key to be wrapped, n * 64 bits + * @param cipher Wrapped key, (n + 1) * 64 bits + * + */ +typedef int (*esp_aes_wrap_t)(const unsigned char *kek, int n, const unsigned char *plain, unsigned char *cipher); + +/** + * @brief The AES unwrap callback function used by esp_wifi. + * + * @param kek 16-octet Key decryption key (KEK). + * @param n Length of the plaintext key in 64-bit units; + * @param cipher Wrapped key to be unwrapped, (n + 1) * 64 bits + * @param plain Plaintext key, n * 64 bits + * + */ +typedef int (*esp_aes_unwrap_t)(const unsigned char *kek, int n, const unsigned char *cipher, unsigned char *plain); + +/** + * @brief The SHA256 callback function used by esp_wifi. + * + * @param key Key for HMAC operations. + * @param key_len Length of the key in bytes. + * @param num_elem Number of elements in the data vector. + * @param addr Pointers to the data areas. + * @param len Lengths of the data blocks. + * @param mac Buffer for the hash (32 bytes). + * + */ +typedef int (*esp_hmac_sha256_vector_t)(const unsigned char *key, int key_len, int num_elem, + const unsigned char *addr[], const int *len, unsigned char *mac); + +/** + * @brief The SHA256 PRF callback function used by esp_wifi. + * + * @param key Key for PRF. + * @param key_len Length of the key in bytes. + * @param label A unique label for each purpose of the PRF. + * @param data Extra data to bind into the key. + * @param data_len Length of the data. + * @param buf Buffer for the generated pseudo-random key. + * @param buf_len Number of bytes of key to generate. + * + */ +typedef int (*esp_sha256_prf_t)(const unsigned char *key, int key_len, const char *label, + const unsigned char *data, int data_len, unsigned char *buf, int buf_len); + +/** + * @brief HMAC-MD5 callback function over data buffer (RFC 2104)' + * + * @param key Key for HMAC operations + * @param key_len Length of the key in bytes + * @param data Pointers to the data area + * @param data_len Length of the data area + * @param mac Buffer for the hash (16 bytes) + * Returns: 0 on success, -1 on failure + */ +typedef int (*esp_hmac_md5_t)(const unsigned char *key, unsigned int key_len, const unsigned char *data, + unsigned int data_len, unsigned char *mac); + +/** + * @brief HMAC-MD5 callback function over data vector (RFC 2104) + * + * @param key Key for HMAC operations + * @param key_len Length of the key in bytes + * @param num_elem Number of elements in the data vector + * @param addr Pointers to the data areas + * @param len Lengths of the data blocks + * @param mac Buffer for the hash (16 bytes) + * Returns: 0 on success, -1 on failure + */ +typedef int (*esp_hmac_md5_vector_t)(const unsigned char *key, unsigned int key_len, unsigned int num_elem, + const unsigned char *addr[], const unsigned int *len, unsigned char *mac); + +/** + * @brief HMAC-SHA1 callback function over data buffer (RFC 2104) + * + * @param key Key for HMAC operations + * @param key_len Length of the key in bytes + * @param data Pointers to the data area + * @param data_len Length of the data area + * @param mac Buffer for the hash (20 bytes) + * Returns: 0 on success, -1 of failure + */ +typedef int (*esp_hmac_sha1_t)(const unsigned char *key, unsigned int key_len, const unsigned char *data, + unsigned int data_len, unsigned char *mac); + +/** + * @brief HMAC-SHA1 callback function over data vector (RFC 2104) + * + * @param key Key for HMAC operations + * @param key_len Length of the key in bytes + * @param num_elem Number of elements in the data vector + * @param addr Pointers to the data areas + * @param len Lengths of the data blocks + * @param mac Buffer for the hash (20 bytes) + * Returns: 0 on success, -1 on failure + */ +typedef int (*esp_hmac_sha1_vector_t)(const unsigned char *key, unsigned int key_len, unsigned int num_elem, + const unsigned char *addr[], const unsigned int *len, unsigned char *mac); + +/** + * @brief SHA1-based Pseudo-Random Function (PRF) (IEEE 802.11i, 8.5.1.1) callback function + * + * @param key Key for PRF + * @param key_len Length of the key in bytes + * @param label A unique label for each purpose of the PRF + * @param data Extra data to bind into the key + * @param data_len Length of the data + * @param buf Buffer for the generated pseudo-random key + * @param buf_len Number of bytes of key to generate + * Returns: 0 on success, -1 of failure + * + * This function is used to derive new, cryptographically separate keys from a + * given key (e.g., PMK in IEEE 802.11i). + */ +typedef int (*esp_sha1_prf_t)(const unsigned char *key, unsigned int key_len, const char *label, + const unsigned char *data, unsigned int data_len, unsigned char *buf, unsigned int buf_len); + +/** + * @brief SHA-1 hash callback function for data vector + * + * @param num_elem Number of elements in the data vector + * @param addr Pointers to the data areas + * @param len Lengths of the data blocks + * @param mac Buffer for the hash + * Returns: 0 on success, -1 on failure + */ +typedef int (*esp_sha1_vector_t)(unsigned int num_elem, const unsigned char *addr[], const unsigned int *len, + unsigned char *mac); + +/** + * @brief SHA1-based key derivation function (PBKDF2) callback function for IEEE 802.11i + * + * @param passphrase ASCII passphrase + * @param ssid SSID + * @param ssid_len SSID length in bytes + * @param iterations Number of iterations to run + * @param buf Buffer for the generated key + * @param buflen Length of the buffer in bytes + * Returns: 0 on success, -1 of failure + * + * This function is used to derive PSK for WPA-PSK. For this protocol, + * iterations is set to 4096 and buflen to 32. This function is described in + * IEEE Std 802.11-2004, Clause H.4. The main construction is from PKCS#5 v2.0. + */ +typedef int (*esp_pbkdf2_sha1_t)(const char *passphrase, const char *ssid, unsigned int ssid_len, + int iterations, unsigned char *buf, unsigned int buflen); + +/** + * @brief XOR RC4 stream callback function to given data with skip-stream-start + * + * @param key RC4 key + * @param keylen RC4 key length + * @param skip number of bytes to skip from the beginning of the RC4 stream + * @param data data to be XOR'ed with RC4 stream + * @param data_len buf length + * Returns: 0 on success, -1 on failure + * + * Generate RC4 pseudo random stream for the given key, skip beginning of the + * stream, and XOR the end result with the data buffer to perform RC4 + * encryption/decryption. + */ +typedef int (*esp_rc4_skip_t)(const unsigned char *key, unsigned int keylen, unsigned int skip, + unsigned char *data, unsigned int data_len); + +/** + * @brief MD5 hash callback function for data vector + * + * @param num_elem Number of elements in the data vector + * @param addr Pointers to the data areas + * @param len Lengths of the data blocks + * @param mac Buffer for the hash + * Returns: 0 on success, -1 on failure + */ +typedef int (*esp_md5_vector_t)(unsigned int num_elem, const unsigned char *addr[], const unsigned int *len, + unsigned char *mac); + +/** + * @brief Encrypt one AES block callback function + * + * @param ctx Context pointer from aes_encrypt_init() + * @param plain Plaintext data to be encrypted (16 bytes) + * @param crypt Buffer for the encrypted data (16 bytes) + */ +typedef void (*esp_aes_encrypt_t)(void *ctx, const unsigned char *plain, unsigned char *crypt); + +/** + * @brief Initialize AES callback function for encryption + * + * @param key Encryption key + * @param len Key length in bytes (usually 16, i.e., 128 bits) + * Returns: Pointer to context data or %NULL on failure + */ +typedef void * (*esp_aes_encrypt_init_t)(const unsigned char *key, unsigned int len); + +/** + * @brief Deinitialize AES encryption callback function + * + * @param ctx Context pointer from aes_encrypt_init() + */ +typedef void (*esp_aes_encrypt_deinit_t)(void *ctx); + +/** + * @brief Decrypt one AES block callback function + * + * @param ctx Context pointer from aes_encrypt_init() + * @param crypt Encrypted data (16 bytes) + * @param plain Buffer for the decrypted data (16 bytes) + */ +typedef void (*esp_aes_decrypt_t)(void *ctx, const unsigned char *crypt, unsigned char *plain); + +/** + * @brief Initialize AES callback function for decryption + * + * @param key Decryption key + * @param len Key length in bytes (usually 16, i.e., 128 bits) + * Returns: Pointer to context data or %NULL on failure + */ +typedef void * (*esp_aes_decrypt_init_t)(const unsigned char *key, unsigned int len); + +/** + * @brief Deinitialize AES decryption callback function + * + * @param ctx Context pointer from aes_encrypt_init() + */ +typedef void (*esp_aes_decrypt_deinit_t)(void *ctx); + +/** + * @brief One-Key CBC MAC (OMAC1) hash with AES-128 callback function for MIC computation + * + * @param key 128-bit key for the hash operation + * @param data Data buffer for which a MIC is computed + * @param data_len Length of data buffer in bytes + * @param mic Buffer for MIC (128 bits, i.e., 16 bytes) + * Returns: 0 on success, -1 on failure + */ +typedef int (*esp_omac1_aes_128_t)(const uint8_t *key, const uint8_t *data, size_t data_len, + uint8_t *mic); + +/** + * @brief Decrypt data callback function using CCMP (Counter Mode CBC-MAC Protocol OR + * Counter Mode Cipher Block Chaining Message Authentication + * Code Protocol) which is used in IEEE 802.11i RSN standard. + * @param tk 128-bit Temporal Key for obtained during 4-way handshake + * @param ieee80211_hdr Pointer to IEEE802.11 frame headeri needed for AAD + * @param data Pointer to encrypted data buffer + * @param data_len Encrypted data length in bytes + * @param decrypted_len Length of decrypted data + * @param espnow_pkt Indicates if it's an ESPNOW packet + * Returns: Pointer to decrypted data on success, NULL on failure + */ +typedef uint8_t * (*esp_ccmp_decrypt_t)(const uint8_t *tk, const uint8_t *ieee80211_hdr, + const uint8_t *data, size_t data_len, + size_t *decrypted_len, bool espnow_pkt); + +/** + * @brief Encrypt data callback function using CCMP (Counter Mode CBC-MAC Protocol OR + * Counter Mode Cipher Block Chaining Message Authentication + * Code Protocol) which is used in IEEE 802.11i RSN standard. + * @param tk 128-bit Temporal Key for obtained during 4-way handshake + * @param frame Pointer to IEEE802.11 frame including header + * @param len Length of the frame including header + * @param hdrlen Length of the header + * @param pn Packet Number counter + * @param keyid Key ID to be mentioned in CCMP Vector + * @param encrypted_len Length of the encrypted frame including header + */ +typedef uint8_t * (*esp_ccmp_encrypt_t)(const uint8_t *tk, uint8_t *frame, size_t len, size_t hdrlen, + uint8_t *pn, int keyid, size_t *encrypted_len); + +/** + * @brief One-Key GMAC hash callback function with AES for MIC computation + * + * @param key key for the hash operation + * @param keylen key length + * @param iv initialization vector + * @param iv_len initialization vector length + * @param aad aad + * @param aad_len aad length + * @param mic Buffer for MIC (128 bits, i.e., 16 bytes) + * Returns: 0 on success, -1 on failure + */ +typedef int (*esp_aes_gmac_t)(const uint8_t *key, size_t keylen, const uint8_t *iv, size_t iv_len, + const uint8_t *aad, size_t aad_len, uint8_t *mic); + +/** + * @brief SHA256 hash callback function for data vector + * @param num_elem Number of elements in the data vector + * @param addr Pointers to the data areas + * @param len Lengths of the data blocks + * @param buf Buffer for the hash + * Returns: 0 on success, -1 on failure + */ +typedef int (*esp_sha256_vector_t)(size_t num_elem, const uint8_t *addr[], const size_t *len, uint8_t *buf); + +/** + * @brief CRC32 value callback function in little endian. + * + * @param crc Initial CRC value (result of last calculation or 0 for the first time) + * @param buf Data buffer that used to calculate the CRC value + * @param len Length of the data buffer + * @return CRC32 value + */ +typedef uint32_t (*esp_crc32_le_t)(uint32_t crc, uint8_t const *buf, uint32_t len); + +/** + * @brief The crypto callback function structure used by esp_wifi. + * The structure can be set as software crypto or the crypto optimized by device's + * hardware. + */ +typedef struct { + uint32_t size; /**< The crypto callback function structure size */ + uint32_t version; /**< The crypto callback function structure version */ + esp_aes_wrap_t aes_wrap; /**< The AES wrap callback function used by esp_wifi */ + esp_aes_unwrap_t aes_unwrap; /**< The AES unwrap callback function used by esp_wifi */ + esp_hmac_sha256_vector_t hmac_sha256_vector; /**< The SHA256 callback function used by esp_wifi */ + esp_sha256_prf_t sha256_prf; /**< The SHA256 PRF callback function used by esp_wifi */ + esp_hmac_md5_t hmac_md5; /**< HMAC-MD5 callback function over data buffer (RFC 2104) */ + esp_hmac_md5_vector_t hamc_md5_vector; /**< HMAC-MD5 callback function over data vector (RFC 2104) */ + esp_hmac_sha1_t hmac_sha1; /**< HMAC-SHA1 callback function over data buffer (RFC 2104) */ + esp_hmac_sha1_vector_t hmac_sha1_vector; /**< HMAC-SHA1 callback function over data vector (RFC 2104) */ + esp_sha1_prf_t sha1_prf; /**< SHA1-based Pseudo-Random Function (PRF) (IEEE 802.11i, 8.5.1.1) callback function */ + esp_sha1_vector_t sha1_vector; /**< SHA-1 hash callback function for data vector */ + esp_pbkdf2_sha1_t pbkdf2_sha1; /**< SHA1-based key derivation function (PBKDF2) callback function for IEEE 802.11i */ + esp_rc4_skip_t rc4_skip; /**< XOR RC4 stream callback function to given data with skip-stream-start */ + esp_md5_vector_t md5_vector; /**< MD5 hash callback function for data vector */ + esp_aes_encrypt_t aes_encrypt; /**< Encrypt one AES block callback function */ + esp_aes_encrypt_init_t aes_encrypt_init; /**< Initialize AES callback function for encryption */ + esp_aes_encrypt_deinit_t aes_encrypt_deinit; /**< Deinitialize AES encryption callback function */ + esp_aes_decrypt_t aes_decrypt; /**< Decrypt one AES block callback function */ + esp_aes_decrypt_init_t aes_decrypt_init; /**< Initialize AES callback function for decryption */ + esp_aes_decrypt_deinit_t aes_decrypt_deinit; /**< Deinitialize AES decryption callback function */ + esp_aes_128_encrypt_t aes_128_encrypt; /**< The AES 128 encrypt callback function used by esp_wifi */ + esp_aes_128_decrypt_t aes_128_decrypt; /**< The AES 128 decrypt callback function used by esp_wifi */ + esp_omac1_aes_128_t omac1_aes_128; /**< One-Key CBC MAC (OMAC1) hash with AES-128 callback function for MIC computation */ + esp_ccmp_decrypt_t ccmp_decrypt; /**< Decrypt data callback function using CCMP */ + esp_ccmp_encrypt_t ccmp_encrypt; /**< Encrypt data callback function using CCMP */ + esp_aes_gmac_t aes_gmac; /**< One-Key GMAC hash callback function with AES for MIC computation */ + esp_sha256_vector_t sha256_vector; /**< SHA256 hash callback function for data vector */ + esp_crc32_le_t crc32; /**< CRC32 value callback function in little endian */ +}wpa_crypto_funcs_t; + +/** + * @brief The crypto callback function structure used in mesh vendor IE encryption. The + * structure can be set as software crypto or the crypto optimized by device's + * hardware. + */ +typedef struct{ + esp_aes_128_encrypt_t aes_128_encrypt; /**< Callback function used in mesh vendor IE encryption */ + esp_aes_128_decrypt_t aes_128_decrypt; /**< Callback function used in mesh vendor IE decryption */ +} mesh_crypto_funcs_t; + +#ifdef __cplusplus +} +#endif +#endif diff --git a/espradio/blobs/headers/esp_wifi_default.h b/espradio/blobs/headers/esp_wifi_default.h new file mode 100644 index 000000000..d30d512e3 --- /dev/null +++ b/espradio/blobs/headers/esp_wifi_default.h @@ -0,0 +1,152 @@ +/* + * SPDX-FileCopyrightText: 2019-2023 Espressif Systems (Shanghai) CO LTD + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#ifndef _ESP_WIFI_DEFAULT_H +#define _ESP_WIFI_DEFAULT_H + +#include "esp_netif.h" +#include "esp_wifi_types.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * @brief Attaches wifi station interface to supplied netif + * + * @param esp_netif instance to attach the wifi station to + * + * @return + * - ESP_OK on success + * - ESP_FAIL if attach failed + */ +esp_err_t esp_netif_attach_wifi_station(esp_netif_t *esp_netif); + +/** + * @brief Attaches wifi soft AP interface to supplied netif + * + * @param esp_netif instance to attach the wifi AP to + * + * @return + * - ESP_OK on success + * - ESP_FAIL if attach failed + */ +esp_err_t esp_netif_attach_wifi_ap(esp_netif_t *esp_netif); + +/** + * @brief Sets default wifi event handlers for STA interface + * + * @return + * - ESP_OK on success, error returned from esp_event_handler_register if failed + */ +esp_err_t esp_wifi_set_default_wifi_sta_handlers(void); + +/** + * @brief Sets default wifi event handlers for AP interface + * + * @return + * - ESP_OK on success, error returned from esp_event_handler_register if failed + */ +esp_err_t esp_wifi_set_default_wifi_ap_handlers(void); + +/** + * @brief Sets default wifi event handlers for NAN interface + * + * @return + * - ESP_OK on success, error returned from esp_event_handler_register if failed + */ +esp_err_t esp_wifi_set_default_wifi_nan_handlers(void); + +/** + * @brief Clears default wifi event handlers for supplied network interface + * + * @param esp_netif instance of corresponding if object + * + * @return + * - ESP_OK on success, error returned from esp_event_handler_register if failed + */ +esp_err_t esp_wifi_clear_default_wifi_driver_and_handlers(void *esp_netif); + +/** + * @brief Creates default WIFI AP. In case of any init error this API aborts. + * + * @note The API creates esp_netif object with default WiFi access point config, + * attaches the netif to wifi and registers wifi handlers to the default event loop. + * This API uses assert() to check for potential errors, so it could abort the program. + * (Note that the default event loop needs to be created prior to calling this API) + * + * @return pointer to esp-netif instance + */ +esp_netif_t* esp_netif_create_default_wifi_ap(void); + +/** + * @brief Creates default WIFI STA. In case of any init error this API aborts. + * + * @note The API creates esp_netif object with default WiFi station config, + * attaches the netif to wifi and registers wifi handlers to the default event loop. + * This API uses assert() to check for potential errors, so it could abort the program. + * (Note that the default event loop needs to be created prior to calling this API) + * + * @return pointer to esp-netif instance + */ +esp_netif_t* esp_netif_create_default_wifi_sta(void); + +/** + * @brief Creates default WIFI NAN. In case of any init error this API aborts. + * + * @note The API creates esp_netif object with default WiFi station config, + * attaches the netif to wifi and registers wifi handlers to the default event loop. + * (Note that the default event loop needs to be created prior to calling this API) + * + * @return pointer to esp-netif instance + */ +esp_netif_t* esp_netif_create_default_wifi_nan(void); + +/** + * @brief Destroys default WIFI netif created with esp_netif_create_default_wifi_...() API. + * + * @param[in] esp_netif object to detach from WiFi and destroy + * + * @note This API unregisters wifi handlers and detaches the created object from the wifi. + * (this function is a no-operation if esp_netif is NULL) + */ +void esp_netif_destroy_default_wifi(void *esp_netif); + +/** + * @brief Creates esp_netif WiFi object based on the custom configuration. + * + * @attention This API DOES NOT register default handlers! + * + * @param[in] wifi_if type of wifi interface + * @param[in] esp_netif_config inherent esp-netif configuration pointer + * + * @return pointer to esp-netif instance + */ +esp_netif_t* esp_netif_create_wifi(wifi_interface_t wifi_if, const esp_netif_inherent_config_t *esp_netif_config); + +/** + * @brief Creates default STA and AP network interfaces for esp-mesh. + * + * Both netifs are almost identical to the default station and softAP, but with + * DHCP client and server disabled. Please note that the DHCP client is typically + * enabled only if the device is promoted to a root node. + * + * Returns created interfaces which could be ignored setting parameters to NULL + * if an application code does not need to save the interface instances + * for further processing. + * + * @param[out] p_netif_sta pointer where the resultant STA interface is saved (if non NULL) + * @param[out] p_netif_ap pointer where the resultant AP interface is saved (if non NULL) + * + * @return ESP_OK on success + */ +esp_err_t esp_netif_create_default_wifi_mesh_netifs(esp_netif_t **p_netif_sta, esp_netif_t **p_netif_ap); + +#ifdef __cplusplus +} +#endif + +#endif //_ESP_WIFI_DEFAULT_H diff --git a/espradio/blobs/headers/esp_wifi_types.h b/espradio/blobs/headers/esp_wifi_types.h new file mode 100644 index 000000000..1b949f210 --- /dev/null +++ b/espradio/blobs/headers/esp_wifi_types.h @@ -0,0 +1,1124 @@ +/* + * SPDX-FileCopyrightText: 2015-2023 Espressif Systems (Shanghai) CO LTD + * + * SPDX-License-Identifier: Apache-2.0 + */ + + +#ifndef __ESP_WIFI_TYPES_H__ +#define __ESP_WIFI_TYPES_H__ + +#include "esp_private/esp_wifi_types_private.h" +#if CONFIG_SOC_WIFI_HE_SUPPORT +#include "esp_wifi_he_types.h" +#endif + +#ifdef __cplusplus +extern "C" { +#endif + +typedef enum { + WIFI_MODE_NULL = 0, /**< null mode */ + WIFI_MODE_STA, /**< WiFi station mode */ + WIFI_MODE_AP, /**< WiFi soft-AP mode */ + WIFI_MODE_APSTA, /**< WiFi station + soft-AP mode */ + WIFI_MODE_NAN, /**< WiFi NAN mode */ + WIFI_MODE_MAX +} wifi_mode_t; + +typedef enum { + WIFI_IF_STA = ESP_IF_WIFI_STA, + WIFI_IF_AP = ESP_IF_WIFI_AP, +#if defined(CONFIG_IDF_TARGET_ESP32) || defined(CONFIG_IDF_TARGET_ESP32S2) + WIFI_IF_NAN = ESP_IF_WIFI_NAN, +#endif + WIFI_IF_MAX +} wifi_interface_t; + +#define WIFI_OFFCHAN_TX_REQ 1 +#define WIFI_OFFCHAN_TX_CANCEL 0 + +#define WIFI_ROC_REQ 1 +#define WIFI_ROC_CANCEL 0 + +typedef enum { + WIFI_COUNTRY_POLICY_AUTO, /**< Country policy is auto, use the country info of AP to which the station is connected */ + WIFI_COUNTRY_POLICY_MANUAL, /**< Country policy is manual, always use the configured country info */ +} wifi_country_policy_t; + +/** @brief Structure describing WiFi country-based regional restrictions. */ +typedef struct { + char cc[3]; /**< country code string */ + uint8_t schan; /**< start channel */ + uint8_t nchan; /**< total channel number */ + int8_t max_tx_power; /**< This field is used for getting WiFi maximum transmitting power, call esp_wifi_set_max_tx_power to set the maximum transmitting power. */ + wifi_country_policy_t policy; /**< country policy */ +} wifi_country_t; + +/* Strength of authmodes */ +/* OPEN < WEP < WPA_PSK < OWE < WPA2_PSK = WPA_WPA2_PSK < WAPI_PSK < WPA3_PSK = WPA2_WPA3_PSK */ +typedef enum { + WIFI_AUTH_OPEN = 0, /**< authenticate mode : open */ + WIFI_AUTH_WEP, /**< authenticate mode : WEP */ + WIFI_AUTH_WPA_PSK, /**< authenticate mode : WPA_PSK */ + WIFI_AUTH_WPA2_PSK, /**< authenticate mode : WPA2_PSK */ + WIFI_AUTH_WPA_WPA2_PSK, /**< authenticate mode : WPA_WPA2_PSK */ + WIFI_AUTH_ENTERPRISE, /**< authenticate mode : WiFi EAP security */ + WIFI_AUTH_WPA2_ENTERPRISE = WIFI_AUTH_ENTERPRISE, /**< authenticate mode : WiFi EAP security */ + WIFI_AUTH_WPA3_PSK, /**< authenticate mode : WPA3_PSK */ + WIFI_AUTH_WPA2_WPA3_PSK, /**< authenticate mode : WPA2_WPA3_PSK */ + WIFI_AUTH_WAPI_PSK, /**< authenticate mode : WAPI_PSK */ + WIFI_AUTH_OWE, /**< authenticate mode : OWE */ + WIFI_AUTH_WPA3_ENT_192, /**< authenticate mode : WPA3_ENT_SUITE_B_192_BIT */ + WIFI_AUTH_MAX +} wifi_auth_mode_t; + +typedef enum { + WIFI_REASON_UNSPECIFIED = 1, + WIFI_REASON_AUTH_EXPIRE = 2, + WIFI_REASON_AUTH_LEAVE = 3, + WIFI_REASON_ASSOC_EXPIRE = 4, + WIFI_REASON_ASSOC_TOOMANY = 5, + WIFI_REASON_NOT_AUTHED = 6, + WIFI_REASON_NOT_ASSOCED = 7, + WIFI_REASON_ASSOC_LEAVE = 8, + WIFI_REASON_ASSOC_NOT_AUTHED = 9, + WIFI_REASON_DISASSOC_PWRCAP_BAD = 10, + WIFI_REASON_DISASSOC_SUPCHAN_BAD = 11, + WIFI_REASON_BSS_TRANSITION_DISASSOC = 12, + WIFI_REASON_IE_INVALID = 13, + WIFI_REASON_MIC_FAILURE = 14, + WIFI_REASON_4WAY_HANDSHAKE_TIMEOUT = 15, + WIFI_REASON_GROUP_KEY_UPDATE_TIMEOUT = 16, + WIFI_REASON_IE_IN_4WAY_DIFFERS = 17, + WIFI_REASON_GROUP_CIPHER_INVALID = 18, + WIFI_REASON_PAIRWISE_CIPHER_INVALID = 19, + WIFI_REASON_AKMP_INVALID = 20, + WIFI_REASON_UNSUPP_RSN_IE_VERSION = 21, + WIFI_REASON_INVALID_RSN_IE_CAP = 22, + WIFI_REASON_802_1X_AUTH_FAILED = 23, + WIFI_REASON_CIPHER_SUITE_REJECTED = 24, + WIFI_REASON_TDLS_PEER_UNREACHABLE = 25, + WIFI_REASON_TDLS_UNSPECIFIED = 26, + WIFI_REASON_SSP_REQUESTED_DISASSOC = 27, + WIFI_REASON_NO_SSP_ROAMING_AGREEMENT = 28, + WIFI_REASON_BAD_CIPHER_OR_AKM = 29, + WIFI_REASON_NOT_AUTHORIZED_THIS_LOCATION = 30, + WIFI_REASON_SERVICE_CHANGE_PERCLUDES_TS = 31, + WIFI_REASON_UNSPECIFIED_QOS = 32, + WIFI_REASON_NOT_ENOUGH_BANDWIDTH = 33, + WIFI_REASON_MISSING_ACKS = 34, + WIFI_REASON_EXCEEDED_TXOP = 35, + WIFI_REASON_STA_LEAVING = 36, + WIFI_REASON_END_BA = 37, + WIFI_REASON_UNKNOWN_BA = 38, + WIFI_REASON_TIMEOUT = 39, + WIFI_REASON_PEER_INITIATED = 46, + WIFI_REASON_AP_INITIATED = 47, + WIFI_REASON_INVALID_FT_ACTION_FRAME_COUNT = 48, + WIFI_REASON_INVALID_PMKID = 49, + WIFI_REASON_INVALID_MDE = 50, + WIFI_REASON_INVALID_FTE = 51, + WIFI_REASON_TRANSMISSION_LINK_ESTABLISH_FAILED = 67, + WIFI_REASON_ALTERATIVE_CHANNEL_OCCUPIED = 68, + + WIFI_REASON_BEACON_TIMEOUT = 200, + WIFI_REASON_NO_AP_FOUND = 201, + WIFI_REASON_AUTH_FAIL = 202, + WIFI_REASON_ASSOC_FAIL = 203, + WIFI_REASON_HANDSHAKE_TIMEOUT = 204, + WIFI_REASON_CONNECTION_FAIL = 205, + WIFI_REASON_AP_TSF_RESET = 206, + WIFI_REASON_ROAMING = 207, + WIFI_REASON_ASSOC_COMEBACK_TIME_TOO_LONG = 208, + WIFI_REASON_SA_QUERY_TIMEOUT = 209, +} wifi_err_reason_t; + +typedef enum { + WIFI_SECOND_CHAN_NONE = 0, /**< the channel width is HT20 */ + WIFI_SECOND_CHAN_ABOVE, /**< the channel width is HT40 and the secondary channel is above the primary channel */ + WIFI_SECOND_CHAN_BELOW, /**< the channel width is HT40 and the secondary channel is below the primary channel */ +} wifi_second_chan_t; + +typedef enum { + WIFI_SCAN_TYPE_ACTIVE = 0, /**< active scan */ + WIFI_SCAN_TYPE_PASSIVE, /**< passive scan */ +} wifi_scan_type_t; + +/** @brief Range of active scan times per channel */ +typedef struct { + uint32_t min; /**< minimum active scan time per channel, units: millisecond */ + uint32_t max; /**< maximum active scan time per channel, units: millisecond, values above 1500ms may + cause station to disconnect from AP and are not recommended. */ +} wifi_active_scan_time_t; + +/** @brief Aggregate of active & passive scan time per channel */ +typedef struct { + wifi_active_scan_time_t active; /**< active scan time per channel, units: millisecond. */ + uint32_t passive; /**< passive scan time per channel, units: millisecond, values above 1500ms may + cause station to disconnect from AP and are not recommended. */ +} wifi_scan_time_t; + +/** @brief Parameters for an SSID scan. */ +typedef struct { + uint8_t *ssid; /**< SSID of AP */ + uint8_t *bssid; /**< MAC address of AP */ + uint8_t channel; /**< channel, scan the specific channel */ + bool show_hidden; /**< enable to scan AP whose SSID is hidden */ + wifi_scan_type_t scan_type; /**< scan type, active or passive */ + wifi_scan_time_t scan_time; /**< scan time per channel */ + uint8_t home_chan_dwell_time;/**< time spent at home channel between scanning consecutive channels.*/ +} wifi_scan_config_t; + +typedef enum { + WIFI_CIPHER_TYPE_NONE = 0, /**< the cipher type is none */ + WIFI_CIPHER_TYPE_WEP40, /**< the cipher type is WEP40 */ + WIFI_CIPHER_TYPE_WEP104, /**< the cipher type is WEP104 */ + WIFI_CIPHER_TYPE_TKIP, /**< the cipher type is TKIP */ + WIFI_CIPHER_TYPE_CCMP, /**< the cipher type is CCMP */ + WIFI_CIPHER_TYPE_TKIP_CCMP, /**< the cipher type is TKIP and CCMP */ + WIFI_CIPHER_TYPE_AES_CMAC128,/**< the cipher type is AES-CMAC-128 */ + WIFI_CIPHER_TYPE_SMS4, /**< the cipher type is SMS4 */ + WIFI_CIPHER_TYPE_GCMP, /**< the cipher type is GCMP */ + WIFI_CIPHER_TYPE_GCMP256, /**< the cipher type is GCMP-256 */ + WIFI_CIPHER_TYPE_AES_GMAC128,/**< the cipher type is AES-GMAC-128 */ + WIFI_CIPHER_TYPE_AES_GMAC256,/**< the cipher type is AES-GMAC-256 */ + WIFI_CIPHER_TYPE_UNKNOWN, /**< the cipher type is unknown */ +} wifi_cipher_type_t; + +/** + * @brief WiFi antenna + * + */ +typedef enum { + WIFI_ANT_ANT0, /**< WiFi antenna 0 */ + WIFI_ANT_ANT1, /**< WiFi antenna 1 */ + WIFI_ANT_MAX, /**< Invalid WiFi antenna */ +} wifi_ant_t; + +/** @brief Description of a WiFi AP HE Info */ +typedef struct { + uint8_t bss_color:6; /**< an unsigned integer whose value is the BSS Color of the BSS corresponding to the AP */ + uint8_t partial_bss_color:1; /**< indicate if an AID assignment rule based on the BSS color */ + uint8_t bss_color_disabled:1; /**< indicate if the use of BSS color is disabled */ + uint8_t bssid_index; /**< in M-BSSID set, identifies the nontransmitted BSSID */ +} wifi_he_ap_info_t; + +/** @brief Description of a WiFi AP */ +typedef struct { + uint8_t bssid[6]; /**< MAC address of AP */ + uint8_t ssid[33]; /**< SSID of AP */ + uint8_t primary; /**< channel of AP */ + wifi_second_chan_t second; /**< secondary channel of AP */ + int8_t rssi; /**< signal strength of AP. Note that in some rare cases where signal strength is very strong, rssi values can be slightly positive */ + wifi_auth_mode_t authmode; /**< authmode of AP */ + wifi_cipher_type_t pairwise_cipher; /**< pairwise cipher of AP */ + wifi_cipher_type_t group_cipher; /**< group cipher of AP */ + wifi_ant_t ant; /**< antenna used to receive beacon from AP */ + uint32_t phy_11b:1; /**< bit: 0 flag to identify if 11b mode is enabled or not */ + uint32_t phy_11g:1; /**< bit: 1 flag to identify if 11g mode is enabled or not */ + uint32_t phy_11n:1; /**< bit: 2 flag to identify if 11n mode is enabled or not */ + uint32_t phy_lr:1; /**< bit: 3 flag to identify if low rate is enabled or not */ + uint32_t phy_11ax:1; /**< bit: 4 flag to identify if 11ax mode is enabled or not */ + uint32_t wps:1; /**< bit: 5 flag to identify if WPS is supported or not */ + uint32_t ftm_responder:1; /**< bit: 6 flag to identify if FTM is supported in responder mode */ + uint32_t ftm_initiator:1; /**< bit: 7 flag to identify if FTM is supported in initiator mode */ + uint32_t reserved:24; /**< bit: 8..31 reserved */ + wifi_country_t country; /**< country information of AP */ + wifi_he_ap_info_t he_ap; /**< HE AP info */ +} wifi_ap_record_t; + +typedef enum { + WIFI_FAST_SCAN = 0, /**< Do fast scan, scan will end after find SSID match AP */ + WIFI_ALL_CHANNEL_SCAN, /**< All channel scan, scan will end after scan all the channel */ +}wifi_scan_method_t; + +typedef enum { + WIFI_CONNECT_AP_BY_SIGNAL = 0, /**< Sort match AP in scan list by RSSI */ + WIFI_CONNECT_AP_BY_SECURITY, /**< Sort match AP in scan list by security mode */ +}wifi_sort_method_t; + +/** @brief Structure describing parameters for a WiFi fast scan */ +typedef struct { + int8_t rssi; /**< The minimum rssi to accept in the fast scan mode */ + wifi_auth_mode_t authmode; /**< The weakest authmode to accept in the fast scan mode + Note: Incase this value is not set and password is set as per WPA2 standards(password len >= 8), it will be defaulted to WPA2 and device won't connect to deprecated WEP/WPA networks. Please set authmode threshold as WIFI_AUTH_WEP/WIFI_AUTH_WPA_PSK to connect to WEP/WPA networks */ +}wifi_scan_threshold_t; + +typedef enum { + WIFI_PS_NONE, /**< No power save */ + WIFI_PS_MIN_MODEM, /**< Minimum modem power saving. In this mode, station wakes up to receive beacon every DTIM period */ + WIFI_PS_MAX_MODEM, /**< Maximum modem power saving. In this mode, interval to receive beacons is determined by the listen_interval parameter in wifi_sta_config_t */ +} wifi_ps_type_t; + +#define WIFI_PROTOCOL_11B 1 +#define WIFI_PROTOCOL_11G 2 +#define WIFI_PROTOCOL_11N 4 +#define WIFI_PROTOCOL_LR 8 +#define WIFI_PROTOCOL_11AX 16 + +typedef enum { + WIFI_BW_HT20 = 1, /* Bandwidth is HT20 */ + WIFI_BW_HT40, /* Bandwidth is HT40 */ +} wifi_bandwidth_t; + +/** Configuration structure for Protected Management Frame */ +typedef struct { + bool capable; /**< Deprecated variable. Device will always connect in PMF mode if other device also advertizes PMF capability. */ + bool required; /**< Advertizes that Protected Management Frame is required. Device will not associate to non-PMF capable devices. */ +} wifi_pmf_config_t; + +/** Configuration for SAE PWE derivation */ +typedef enum { + WPA3_SAE_PWE_UNSPECIFIED, + WPA3_SAE_PWE_HUNT_AND_PECK, + WPA3_SAE_PWE_HASH_TO_ELEMENT, + WPA3_SAE_PWE_BOTH, +} wifi_sae_pwe_method_t; + +/** Configuration for SAE-PK */ +typedef enum { + WPA3_SAE_PK_MODE_AUTOMATIC = 0, + WPA3_SAE_PK_MODE_ONLY = 1, + WPA3_SAE_PK_MODE_DISABLED = 2, +} wifi_sae_pk_mode_t; + +/** @brief Soft-AP configuration settings for the device */ +typedef struct { + uint8_t ssid[32]; /**< SSID of soft-AP. If ssid_len field is 0, this must be a Null terminated string. Otherwise, length is set according to ssid_len. */ + uint8_t password[64]; /**< Password of soft-AP. */ + uint8_t ssid_len; /**< Optional length of SSID field. */ + uint8_t channel; /**< Channel of soft-AP */ + wifi_auth_mode_t authmode; /**< Auth mode of soft-AP. Do not support AUTH_WEP, AUTH_WAPI_PSK and AUTH_OWE in soft-AP mode. When the auth mode is set to WPA2_PSK, WPA2_WPA3_PSK or WPA3_PSK, the pairwise cipher will be overwritten with WIFI_CIPHER_TYPE_CCMP. */ + uint8_t ssid_hidden; /**< Broadcast SSID or not, default 0, broadcast the SSID */ + uint8_t max_connection; /**< Max number of stations allowed to connect in */ + uint16_t beacon_interval; /**< Beacon interval which should be multiples of 100. Unit: TU(time unit, 1 TU = 1024 us). Range: 100 ~ 60000. Default value: 100 */ + wifi_cipher_type_t pairwise_cipher; /**< Pairwise cipher of SoftAP, group cipher will be derived using this. Cipher values are valid starting from WIFI_CIPHER_TYPE_TKIP, enum values before that will be considered as invalid and default cipher suites(TKIP+CCMP) will be used. Valid cipher suites in softAP mode are WIFI_CIPHER_TYPE_TKIP, WIFI_CIPHER_TYPE_CCMP and WIFI_CIPHER_TYPE_TKIP_CCMP. */ + bool ftm_responder; /**< Enable FTM Responder mode */ + wifi_pmf_config_t pmf_cfg; /**< Configuration for Protected Management Frame */ + wifi_sae_pwe_method_t sae_pwe_h2e; /**< Configuration for SAE PWE derivation method */ +} wifi_ap_config_t; + +#define SAE_H2E_IDENTIFIER_LEN 32 +/** @brief STA configuration settings for the device */ +typedef struct { + uint8_t ssid[32]; /**< SSID of target AP. */ + uint8_t password[64]; /**< Password of target AP. */ + wifi_scan_method_t scan_method; /**< do all channel scan or fast scan */ + bool bssid_set; /**< whether set MAC address of target AP or not. Generally, station_config.bssid_set needs to be 0; and it needs to be 1 only when users need to check the MAC address of the AP.*/ + uint8_t bssid[6]; /**< MAC address of target AP*/ + uint8_t channel; /**< channel of target AP. Set to 1~13 to scan starting from the specified channel before connecting to AP. If the channel of AP is unknown, set it to 0.*/ + uint16_t listen_interval; /**< Listen interval for ESP32 station to receive beacon when WIFI_PS_MAX_MODEM is set. Units: AP beacon intervals. Defaults to 3 if set to 0. */ + wifi_sort_method_t sort_method; /**< sort the connect AP in the list by rssi or security mode */ + wifi_scan_threshold_t threshold; /**< When scan_threshold is set, only APs which have an auth mode that is more secure than the selected auth mode and a signal stronger than the minimum RSSI will be used. */ + wifi_pmf_config_t pmf_cfg; /**< Configuration for Protected Management Frame. Will be advertised in RSN Capabilities in RSN IE. */ + uint32_t rm_enabled:1; /**< Whether Radio Measurements are enabled for the connection */ + uint32_t btm_enabled:1; /**< Whether BSS Transition Management is enabled for the connection */ + uint32_t mbo_enabled:1; /**< Whether MBO is enabled for the connection */ + uint32_t ft_enabled:1; /**< Whether FT is enabled for the connection */ + uint32_t owe_enabled:1; /**< Whether OWE is enabled for the connection */ + uint32_t transition_disable:1; /**< Whether to enable transition disable feature */ + uint32_t reserved:26; /**< Reserved for future feature set */ + wifi_sae_pwe_method_t sae_pwe_h2e; /**< Configuration for SAE PWE derivation method */ + wifi_sae_pk_mode_t sae_pk_mode; /**< Configuration for SAE-PK (Public Key) Authentication method */ + uint8_t failure_retry_cnt; /**< Number of connection retries station will do before moving to next AP. scan_method should be set as WIFI_ALL_CHANNEL_SCAN to use this config. + Note: Enabling this may cause connection time to increase incase best AP doesn't behave properly. */ + uint32_t he_dcm_set:1; /**< Whether DCM max.constellation for transmission and reception is set. */ + uint32_t he_dcm_max_constellation_tx:2; /**< Indicate the max.constellation for DCM in TB PPDU the STA supported. 0: not supported. 1: BPSK, 2: QPSK, 3: 16-QAM. The default value is 3. */ + uint32_t he_dcm_max_constellation_rx:2; /**< Indicate the max.constellation for DCM in both Data field and HE-SIG-B field the STA supported. 0: not supported. 1: BPSK, 2: QPSK, 3: 16-QAM. The default value is 3. */ + uint32_t he_mcs9_enabled:1; /**< Whether to support HE-MCS 0 to 9. The default value is 0. */ + uint32_t he_su_beamformee_disabled:1; /**< Whether to disable support for operation as an SU beamformee. */ + uint32_t he_trig_su_bmforming_feedback_disabled:1; /**< Whether to disable support the transmission of SU feedback in an HE TB sounding sequence. */ + uint32_t he_trig_mu_bmforming_partial_feedback_disabled:1; /**< Whether to disable support the transmission of partial-bandwidth MU feedback in an HE TB sounding sequence. */ + uint32_t he_trig_cqi_feedback_disabled:1; /**< Whether to disable support the transmission of CQI feedback in an HE TB sounding sequence. */ + uint32_t he_reserved:22; /**< Reserved for future feature set */ + uint8_t sae_h2e_identifier[SAE_H2E_IDENTIFIER_LEN];/**< Password identifier for H2E. this needs to be null terminated string */ +} wifi_sta_config_t; + +/** + * @brief NAN Discovery start configuration + * + */ +typedef struct { + uint8_t op_channel; /**< NAN Discovery operating channel */ + uint8_t master_pref; /**< Device's preference value to serve as NAN Master */ + uint8_t scan_time; /**< Scan time in seconds while searching for a NAN cluster */ + uint16_t warm_up_sec; /**< Warm up time before assuming NAN Anchor Master role */ +} wifi_nan_config_t; + +/** @brief Configuration data for device's AP or STA or NAN. + * + * The usage of this union (for ap, sta or nan configuration) is determined by the accompanying + * interface argument passed to esp_wifi_set_config() or esp_wifi_get_config() + * + */ +typedef union { + wifi_ap_config_t ap; /**< configuration of AP */ + wifi_sta_config_t sta; /**< configuration of STA */ + wifi_nan_config_t nan; /**< configuration of NAN */ +} wifi_config_t; + +/** @brief Description of STA associated with AP */ +typedef struct { + uint8_t mac[6]; /**< mac address */ + int8_t rssi; /**< current average rssi of sta connected */ + uint32_t phy_11b:1; /**< bit: 0 flag to identify if 11b mode is enabled or not */ + uint32_t phy_11g:1; /**< bit: 1 flag to identify if 11g mode is enabled or not */ + uint32_t phy_11n:1; /**< bit: 2 flag to identify if 11n mode is enabled or not */ + uint32_t phy_lr:1; /**< bit: 3 flag to identify if low rate is enabled or not */ + uint32_t phy_11ax:1; /**< bit: 4 flag to identify if 11ax mode is enabled or not */ + uint32_t is_mesh_child:1;/**< bit: 5 flag to identify mesh child */ + uint32_t reserved:26; /**< bit: 6..31 reserved */ +} wifi_sta_info_t; + +#if CONFIG_IDF_TARGET_ESP32C2 +#define ESP_WIFI_MAX_CONN_NUM (4) /**< max number of stations which can connect to ESP32C2 soft-AP */ +#elif CONFIG_IDF_TARGET_ESP32C3 || CONFIG_IDF_TARGET_ESP32C6 +#define ESP_WIFI_MAX_CONN_NUM (10) /**< max number of stations which can connect to ESP32C3 soft-AP */ +#else +#define ESP_WIFI_MAX_CONN_NUM (15) /**< max number of stations which can connect to ESP32/ESP32S3/ESP32S2 soft-AP */ +#endif + +/** @brief List of stations associated with the Soft-AP */ +typedef struct { + wifi_sta_info_t sta[ESP_WIFI_MAX_CONN_NUM]; /**< station list */ + int num; /**< number of stations in the list (other entries are invalid) */ +} wifi_sta_list_t; + +typedef enum { + WIFI_STORAGE_FLASH, /**< all configuration will store in both memory and flash */ + WIFI_STORAGE_RAM, /**< all configuration will only store in the memory */ +} wifi_storage_t; + +/** + * @brief Vendor Information Element type + * + * Determines the frame type that the IE will be associated with. + */ +typedef enum { + WIFI_VND_IE_TYPE_BEACON, + WIFI_VND_IE_TYPE_PROBE_REQ, + WIFI_VND_IE_TYPE_PROBE_RESP, + WIFI_VND_IE_TYPE_ASSOC_REQ, + WIFI_VND_IE_TYPE_ASSOC_RESP, +} wifi_vendor_ie_type_t; + +/** + * @brief Vendor Information Element index + * + * Each IE type can have up to two associated vendor ID elements. + */ +typedef enum { + WIFI_VND_IE_ID_0, + WIFI_VND_IE_ID_1, +} wifi_vendor_ie_id_t; + +#define WIFI_VENDOR_IE_ELEMENT_ID 0xDD + +/** + * @brief Operation Phymode + */ +typedef enum +{ + WIFI_PHY_MODE_LR, /**< PHY mode for Low Rate */ + WIFI_PHY_MODE_11B, /**< PHY mode for 11b */ + WIFI_PHY_MODE_11G, /**< PHY mode for 11g */ + WIFI_PHY_MODE_HT20, /**< PHY mode for Bandwidth HT20 */ + WIFI_PHY_MODE_HT40, /**< PHY mode for Bandwidth HT40 */ + WIFI_PHY_MODE_HE20, /**< PHY mode for Bandwidth HE20 */ +} wifi_phy_mode_t; + +/** + * @brief Vendor Information Element header + * + * The first bytes of the Information Element will match this header. Payload follows. + */ +typedef struct { + uint8_t element_id; /**< Should be set to WIFI_VENDOR_IE_ELEMENT_ID (0xDD) */ + uint8_t length; /**< Length of all bytes in the element data following this field. Minimum 4. */ + uint8_t vendor_oui[3]; /**< Vendor identifier (OUI). */ + uint8_t vendor_oui_type; /**< Vendor-specific OUI type. */ + uint8_t payload[0]; /**< Payload. Length is equal to value in 'length' field, minus 4. */ +} vendor_ie_data_t; + +#if CONFIG_SOC_WIFI_HE_SUPPORT +typedef esp_wifi_rxctrl_t wifi_pkt_rx_ctrl_t; +#else +/** @brief Received packet radio metadata header, this is the common header at the beginning of all promiscuous mode RX callback buffers */ +typedef struct { + signed rssi:8; /**< Received Signal Strength Indicator(RSSI) of packet. unit: dBm */ + unsigned rate:5; /**< PHY rate encoding of the packet. Only valid for non HT(11bg) packet */ + unsigned :1; /**< reserved */ + unsigned sig_mode:2; /**< Protocol of the reveived packet, 0: non HT(11bg) packet; 1: HT(11n) packet; 3: VHT(11ac) packet */ + unsigned :16; /**< reserved */ + unsigned mcs:7; /**< Modulation Coding Scheme. If is HT(11n) packet, shows the modulation, range from 0 to 76(MSC0 ~ MCS76) */ + unsigned cwb:1; /**< Channel Bandwidth of the packet. 0: 20MHz; 1: 40MHz */ + unsigned :16; /**< reserved */ + unsigned smoothing:1; /**< Set to 1 indicates that channel estimate smoothing is recommended. + Set to 0 indicates that only per-carrierindependent (unsmoothed) channel estimate is recommended. */ + unsigned not_sounding:1; /**< Set to 0 indicates that PPDU is a sounding PPDU. Set to 1indicates that the PPDU is not a sounding PPDU. + sounding PPDU is used for channel estimation by the request receiver */ + unsigned :1; /**< reserved */ + unsigned aggregation:1; /**< Aggregation. 0: MPDU packet; 1: AMPDU packet */ + unsigned stbc:2; /**< Space Time Block Code(STBC). 0: non STBC packet; 1: STBC packet */ + unsigned fec_coding:1; /**< Forward Error Correction(FEC). Flag is set for 11n packets which are LDPC */ + unsigned sgi:1; /**< Short Guide Interval(SGI). 0: Long GI; 1: Short GI */ +#if CONFIG_IDF_TARGET_ESP32 + signed noise_floor:8; /**< noise floor of Radio Frequency Module(RF). unit: dBm*/ +#elif CONFIG_IDF_TARGET_ESP32S2 || CONFIG_IDF_TARGET_ESP32S3 || CONFIG_IDF_TARGET_ESP32C3 || CONFIG_IDF_TARGET_ESP32C2 + unsigned :8; /**< reserved */ +#endif + unsigned ampdu_cnt:8; /**< the number of subframes aggregated in AMPDU */ + unsigned channel:4; /**< primary channel on which this packet is received */ + unsigned secondary_channel:4; /**< secondary channel on which this packet is received. 0: none; 1: above; 2: below */ + unsigned :8; /**< reserved */ + unsigned timestamp:32; /**< timestamp. The local time when this packet is received. It is precise only if modem sleep or light sleep is not enabled. unit: microsecond */ + unsigned :32; /**< reserved */ +#if CONFIG_IDF_TARGET_ESP32S2 + unsigned :32; /**< reserved */ +#elif CONFIG_IDF_TARGET_ESP32S3 || CONFIG_IDF_TARGET_ESP32C3 || CONFIG_IDF_TARGET_ESP32C2 + signed noise_floor:8; /**< noise floor of Radio Frequency Module(RF). unit: dBm*/ + unsigned :24; /**< reserved */ + unsigned :32; /**< reserved */ +#endif + unsigned :31; /**< reserved */ + unsigned ant:1; /**< antenna number from which this packet is received. 0: WiFi antenna 0; 1: WiFi antenna 1 */ +#if CONFIG_IDF_TARGET_ESP32S2 + signed noise_floor:8; /**< noise floor of Radio Frequency Module(RF). unit: dBm*/ + unsigned :24; /**< reserved */ +#elif CONFIG_IDF_TARGET_ESP32S3 || CONFIG_IDF_TARGET_ESP32C3 || CONFIG_IDF_TARGET_ESP32C2 + unsigned :32; /**< reserved */ + unsigned :32; /**< reserved */ + unsigned :32; /**< reserved */ +#endif + unsigned sig_len:12; /**< length of packet including Frame Check Sequence(FCS) */ + unsigned :12; /**< reserved */ + unsigned rx_state:8; /**< state of the packet. 0: no error; others: error numbers which are not public */ +} wifi_pkt_rx_ctrl_t; +#endif + +/** @brief Payload passed to 'buf' parameter of promiscuous mode RX callback. + */ +typedef struct { + wifi_pkt_rx_ctrl_t rx_ctrl; /**< metadata header */ + uint8_t payload[0]; /**< Data or management payload. Length of payload is described by rx_ctrl.sig_len. Type of content determined by packet type argument of callback. */ +} wifi_promiscuous_pkt_t; + +/** + * @brief Promiscuous frame type + * + * Passed to promiscuous mode RX callback to indicate the type of parameter in the buffer. + * + */ +typedef enum { + WIFI_PKT_MGMT, /**< Management frame, indicates 'buf' argument is wifi_promiscuous_pkt_t */ + WIFI_PKT_CTRL, /**< Control frame, indicates 'buf' argument is wifi_promiscuous_pkt_t */ + WIFI_PKT_DATA, /**< Data frame, indiciates 'buf' argument is wifi_promiscuous_pkt_t */ + WIFI_PKT_MISC, /**< Other type, such as MIMO etc. 'buf' argument is wifi_promiscuous_pkt_t but the payload is zero length. */ +} wifi_promiscuous_pkt_type_t; + + +#define WIFI_PROMIS_FILTER_MASK_ALL (0xFFFFFFFF) /**< filter all packets */ +#define WIFI_PROMIS_FILTER_MASK_MGMT (1) /**< filter the packets with type of WIFI_PKT_MGMT */ +#define WIFI_PROMIS_FILTER_MASK_CTRL (1<<1) /**< filter the packets with type of WIFI_PKT_CTRL */ +#define WIFI_PROMIS_FILTER_MASK_DATA (1<<2) /**< filter the packets with type of WIFI_PKT_DATA */ +#define WIFI_PROMIS_FILTER_MASK_MISC (1<<3) /**< filter the packets with type of WIFI_PKT_MISC */ +#define WIFI_PROMIS_FILTER_MASK_DATA_MPDU (1<<4) /**< filter the MPDU which is a kind of WIFI_PKT_DATA */ +#define WIFI_PROMIS_FILTER_MASK_DATA_AMPDU (1<<5) /**< filter the AMPDU which is a kind of WIFI_PKT_DATA */ +#define WIFI_PROMIS_FILTER_MASK_FCSFAIL (1<<6) /**< filter the FCS failed packets, do not open it in general */ + +#define WIFI_PROMIS_CTRL_FILTER_MASK_ALL (0xFF800000) /**< filter all control packets */ +#define WIFI_PROMIS_CTRL_FILTER_MASK_WRAPPER (1<<23) /**< filter the control packets with subtype of Control Wrapper */ +#define WIFI_PROMIS_CTRL_FILTER_MASK_BAR (1<<24) /**< filter the control packets with subtype of Block Ack Request */ +#define WIFI_PROMIS_CTRL_FILTER_MASK_BA (1<<25) /**< filter the control packets with subtype of Block Ack */ +#define WIFI_PROMIS_CTRL_FILTER_MASK_PSPOLL (1<<26) /**< filter the control packets with subtype of PS-Poll */ +#define WIFI_PROMIS_CTRL_FILTER_MASK_RTS (1<<27) /**< filter the control packets with subtype of RTS */ +#define WIFI_PROMIS_CTRL_FILTER_MASK_CTS (1<<28) /**< filter the control packets with subtype of CTS */ +#define WIFI_PROMIS_CTRL_FILTER_MASK_ACK (1<<29) /**< filter the control packets with subtype of ACK */ +#define WIFI_PROMIS_CTRL_FILTER_MASK_CFEND (1<<30) /**< filter the control packets with subtype of CF-END */ +#define WIFI_PROMIS_CTRL_FILTER_MASK_CFENDACK (1<<31) /**< filter the control packets with subtype of CF-END+CF-ACK */ + +/** @brief Mask for filtering different packet types in promiscuous mode. */ +typedef struct { + uint32_t filter_mask; /**< OR of one or more filter values WIFI_PROMIS_FILTER_* */ +} wifi_promiscuous_filter_t; + +#define WIFI_EVENT_MASK_ALL (0xFFFFFFFF) /**< mask all WiFi events */ +#define WIFI_EVENT_MASK_NONE (0) /**< mask none of the WiFi events */ +#define WIFI_EVENT_MASK_AP_PROBEREQRECVED (BIT(0)) /**< mask SYSTEM_EVENT_AP_PROBEREQRECVED event */ + +/** + * @brief Channel state information(CSI) configuration type + * + */ +#if CONFIG_SOC_WIFI_HE_SUPPORT +typedef wifi_csi_acquire_config_t wifi_csi_config_t; +#else +typedef struct { + bool lltf_en; /**< enable to receive legacy long training field(lltf) data. Default enabled */ + bool htltf_en; /**< enable to receive HT long training field(htltf) data. Default enabled */ + bool stbc_htltf2_en; /**< enable to receive space time block code HT long training field(stbc-htltf2) data. Default enabled */ + bool ltf_merge_en; /**< enable to generate htlft data by averaging lltf and ht_ltf data when receiving HT packet. Otherwise, use ht_ltf data directly. Default enabled */ + bool channel_filter_en; /**< enable to turn on channel filter to smooth adjacent sub-carrier. Disable it to keep independence of adjacent sub-carrier. Default enabled */ + bool manu_scale; /**< manually scale the CSI data by left shifting or automatically scale the CSI data. If set true, please set the shift bits. false: automatically. true: manually. Default false */ + uint8_t shift; /**< manually left shift bits of the scale of the CSI data. The range of the left shift bits is 0~15 */ + bool dump_ack_en; /**< enable to dump 802.11 ACK frame, default disabled */ +} wifi_csi_config_t; +#endif + +/** + * @brief CSI data type + * + */ +typedef struct { + wifi_pkt_rx_ctrl_t rx_ctrl;/**< received packet radio metadata header of the CSI data */ + uint8_t mac[6]; /**< source MAC address of the CSI data */ + uint8_t dmac[6]; /**< destination MAC address of the CSI data */ + bool first_word_invalid; /**< first four bytes of the CSI data is invalid or not, true indicates the first four bytes is invalid due to hardware limition */ + int8_t *buf; /**< valid buffer of CSI data */ + uint16_t len; /**< valid length of CSI data */ + uint8_t *hdr; /**< header of the wifi packet */ + uint8_t *payload; /**< payload of the wifi packet */ + uint16_t payload_len; /**< payload len of the wifi packet */ +} wifi_csi_info_t; + +/** + * @brief WiFi GPIO configuration for antenna selection + * + */ +typedef struct { + uint8_t gpio_select: 1, /**< Whether this GPIO is connected to external antenna switch */ + gpio_num: 7; /**< The GPIO number that connects to external antenna switch */ +} wifi_ant_gpio_t; + +/** + * @brief WiFi GPIOs configuration for antenna selection + * + */ +typedef struct { + wifi_ant_gpio_t gpio_cfg[4]; /**< The configurations of GPIOs that connect to external antenna switch */ +} wifi_ant_gpio_config_t; + +/** + * @brief WiFi antenna mode + * + */ +typedef enum { + WIFI_ANT_MODE_ANT0, /**< Enable WiFi antenna 0 only */ + WIFI_ANT_MODE_ANT1, /**< Enable WiFi antenna 1 only */ + WIFI_ANT_MODE_AUTO, /**< Enable WiFi antenna 0 and 1, automatically select an antenna */ + WIFI_ANT_MODE_MAX, /**< Invalid WiFi enabled antenna */ +} wifi_ant_mode_t; + +/** + * @brief WiFi antenna configuration + * + */ +typedef struct { + wifi_ant_mode_t rx_ant_mode; /**< WiFi antenna mode for receiving */ + wifi_ant_t rx_ant_default; /**< Default antenna mode for receiving, it's ignored if rx_ant_mode is not WIFI_ANT_MODE_AUTO */ + wifi_ant_mode_t tx_ant_mode; /**< WiFi antenna mode for transmission, it can be set to WIFI_ANT_MODE_AUTO only if rx_ant_mode is set to WIFI_ANT_MODE_AUTO */ + uint8_t enabled_ant0: 4, /**< Index (in antenna GPIO configuration) of enabled WIFI_ANT_MODE_ANT0 */ + enabled_ant1: 4; /**< Index (in antenna GPIO configuration) of enabled WIFI_ANT_MODE_ANT1 */ +} wifi_ant_config_t; + +/** + * @brief The Rx callback function of Action Tx operations + * + * @param hdr pointer to the IEEE 802.11 Header structure + * @param payload pointer to the Payload following 802.11 Header + * @param len length of the Payload + * @param channel channel number the frame is received on + * + */ +typedef int (* wifi_action_rx_cb_t)(uint8_t *hdr, uint8_t *payload, + size_t len, uint8_t channel); + +/** + * @brief Action Frame Tx Request + * + * + */ +typedef struct { + wifi_interface_t ifx; /**< WiFi interface to send request to */ + uint8_t dest_mac[6]; /**< Destination MAC address */ + bool no_ack; /**< Indicates no ack required */ + wifi_action_rx_cb_t rx_cb; /**< Rx Callback to receive any response */ + uint32_t data_len; /**< Length of the appended Data */ + uint8_t data[0]; /**< Appended Data payload */ +} wifi_action_tx_req_t; + +/** + * @brief FTM Initiator configuration + * + */ +typedef struct { + uint8_t resp_mac[6]; /**< MAC address of the FTM Responder */ + uint8_t channel; /**< Primary channel of the FTM Responder */ + uint8_t frm_count; /**< No. of FTM frames requested in terms of 4 or 8 bursts (allowed values - 0(No pref), 16, 24, 32, 64) */ + uint16_t burst_period; /**< Requested time period between consecutive FTM bursts in 100's of milliseconds (0 - No pref) */ +} wifi_ftm_initiator_cfg_t; + +/** + * @brief WiFi beacon monitor parameter configuration + * + */ +typedef struct { + bool enable; /**< Enable or disable beacon monitor */ + uint8_t loss_timeout; /**< Beacon lost timeout */ + uint8_t loss_threshold; /**< Maximum number of consecutive lost beacons allowed */ + uint8_t delta_intr_early; /**< Delta early time for RF PHY on */ + uint8_t delta_loss_timeout; /**< Delta timeout time for RF PHY off */ +#if MAC_SUPPORT_PMU_MODEM_STATE + uint8_t beacon_abort: 1, /**< Enable or disable beacon abort */ + broadcast_wakeup: 1, /**< Enable or disable TIM element multicast wakeup */ + reserved: 6; /**< Reserved */ + uint8_t tsf_time_sync_deviation; /**< Deviation range to sync with AP TSF timestamp */ + uint16_t modem_state_consecutive; /**< PMU MODEM state consecutive count limit */ + uint16_t rf_ctrl_wait_cycle; /**< RF on wait time (unit: Modem APB clock cycle) */ +#endif +} wifi_beacon_monitor_config_t; + +#define ESP_WIFI_NAN_MAX_SVC_SUPPORTED 2 +#define ESP_WIFI_NAN_DATAPATH_MAX_PEERS 2 + +#define ESP_WIFI_NDP_ROLE_INITIATOR 1 +#define ESP_WIFI_NDP_ROLE_RESPONDER 2 + +#define ESP_WIFI_MAX_SVC_NAME_LEN 256 +#define ESP_WIFI_MAX_FILTER_LEN 256 +#define ESP_WIFI_MAX_SVC_INFO_LEN 64 + +/** + * @brief NAN Services types + * + */ +typedef enum { + NAN_PUBLISH_SOLICITED, /**< Send unicast Publish frame to Subscribers that match the requirement */ + NAN_PUBLISH_UNSOLICITED,/**< Send broadcast Publish frames in every Discovery Window(DW) */ + NAN_SUBSCRIBE_ACTIVE, /**< Send broadcast Subscribe frames in every DW */ + NAN_SUBSCRIBE_PASSIVE, /**< Passively listens to Publish frames */ +} wifi_nan_service_type_t; + +/** + * @brief NAN Publish service configuration parameters + * + */ +typedef struct { + char service_name[ESP_WIFI_MAX_SVC_NAME_LEN]; /**< Service name identifier */ + wifi_nan_service_type_t type; /**< Service type */ + char matching_filter[ESP_WIFI_MAX_FILTER_LEN]; /**< Comma separated filters for filtering services */ + char svc_info[ESP_WIFI_MAX_SVC_INFO_LEN]; /**< Service info shared in Publish frame */ + uint8_t single_replied_event:1; /**< Give single Replied event or every time */ + uint8_t datapath_reqd:1; /**< NAN Datapath required for the service */ + uint8_t reserved:6; /**< Reserved */ +} wifi_nan_publish_cfg_t; + +/** + * @brief NAN Subscribe service configuration parameters + * + */ +typedef struct { + char service_name[ESP_WIFI_MAX_SVC_NAME_LEN]; /**< Service name identifier */ + wifi_nan_service_type_t type; /**< Service type */ + char matching_filter[ESP_WIFI_MAX_FILTER_LEN]; /**< Comma separated filters for filtering services */ + char svc_info[ESP_WIFI_MAX_SVC_INFO_LEN]; /**< Service info shared in Subscribe frame */ + uint8_t single_match_event:1; /**< Give single Match event or every time */ + uint8_t reserved:7; /**< Reserved */ +} wifi_nan_subscribe_cfg_t; + +/** + * @brief NAN Follow-up parameters + * + */ +typedef struct { + uint8_t inst_id; /**< Own service instance id */ + uint8_t peer_inst_id; /**< Peer's service instance id */ + uint8_t peer_mac[6]; /**< Peer's MAC address */ + char svc_info[ESP_WIFI_MAX_SVC_INFO_LEN];/**< Service info(or message) to be shared */ +} wifi_nan_followup_params_t; + +/** + * @brief NAN Datapath Request parameters + * + */ +typedef struct { + uint8_t pub_id; /**< Publisher's service instance id */ + uint8_t peer_mac[6]; /**< Peer's MAC address */ + bool confirm_required; /**< NDP Confirm frame required */ +} wifi_nan_datapath_req_t; + +/** + * @brief NAN Datapath Response parameters + * + */ +typedef struct { + bool accept; /**< True - Accept incoming NDP, False - Reject it */ + uint8_t ndp_id; /**< NAN Datapath Identifier */ + uint8_t peer_mac[6]; /**< Peer's MAC address */ +} wifi_nan_datapath_resp_t; + +/** + * @brief NAN Datapath End parameters + * + */ +typedef struct { + uint8_t ndp_id; /**< NAN Datapath Identifier */ + uint8_t peer_mac[6]; /**< Peer's MAC address */ +} wifi_nan_datapath_end_req_t; + +/** + * @brief WiFi PHY rate encodings + * + */ +typedef enum { + WIFI_PHY_RATE_1M_L = 0x00, /**< 1 Mbps with long preamble */ + WIFI_PHY_RATE_2M_L = 0x01, /**< 2 Mbps with long preamble */ + WIFI_PHY_RATE_5M_L = 0x02, /**< 5.5 Mbps with long preamble */ + WIFI_PHY_RATE_11M_L = 0x03, /**< 11 Mbps with long preamble */ + WIFI_PHY_RATE_2M_S = 0x05, /**< 2 Mbps with short preamble */ + WIFI_PHY_RATE_5M_S = 0x06, /**< 5.5 Mbps with short preamble */ + WIFI_PHY_RATE_11M_S = 0x07, /**< 11 Mbps with short preamble */ + WIFI_PHY_RATE_48M = 0x08, /**< 48 Mbps */ + WIFI_PHY_RATE_24M = 0x09, /**< 24 Mbps */ + WIFI_PHY_RATE_12M = 0x0A, /**< 12 Mbps */ + WIFI_PHY_RATE_6M = 0x0B, /**< 6 Mbps */ + WIFI_PHY_RATE_54M = 0x0C, /**< 54 Mbps */ + WIFI_PHY_RATE_36M = 0x0D, /**< 36 Mbps */ + WIFI_PHY_RATE_18M = 0x0E, /**< 18 Mbps */ + WIFI_PHY_RATE_9M = 0x0F, /**< 9 Mbps */ + /**< rate table and guard interval information for each MCS rate*/ + /* + ----------------------------------------------------------------------------------------------------------- + MCS RATE | HT20 | HT40 | HE20 | + WIFI_PHY_RATE_MCS0_LGI | 6.5 Mbps (800ns) | 13.5 Mbps (800ns) | 8.1 Mbps (1600ns) | + WIFI_PHY_RATE_MCS1_LGI | 13 Mbps (800ns) | 27 Mbps (800ns) | 16.3 Mbps (1600ns) | + WIFI_PHY_RATE_MCS2_LGI | 19.5 Mbps (800ns) | 40.5 Mbps (800ns) | 24.4 Mbps (1600ns) | + WIFI_PHY_RATE_MCS3_LGI | 26 Mbps (800ns) | 54 Mbps (800ns) | 32.5 Mbps (1600ns) | + WIFI_PHY_RATE_MCS4_LGI | 39 Mbps (800ns) | 81 Mbps (800ns) | 48.8 Mbps (1600ns) | + WIFI_PHY_RATE_MCS5_LGI | 52 Mbps (800ns) | 108 Mbps (800ns) | 65 Mbps (1600ns) | + WIFI_PHY_RATE_MCS6_LGI | 58.5 Mbps (800ns) | 121.5 Mbps (800ns) | 73.1 Mbps (1600ns) | + WIFI_PHY_RATE_MCS7_LGI | 65 Mbps (800ns) | 135 Mbps (800ns) | 81.3 Mbps (1600ns) | + WIFI_PHY_RATE_MCS8_LGI | ----- | ----- | 97.5 Mbps (1600ns) | + WIFI_PHY_RATE_MCS9_LGI | ----- | ----- | 108.3 Mbps (1600ns) | + ----------------------------------------------------------------------------------------------------------- + */ + WIFI_PHY_RATE_MCS0_LGI = 0x10, /**< MCS0 with long GI */ + WIFI_PHY_RATE_MCS1_LGI = 0x11, /**< MCS1 with long GI */ + WIFI_PHY_RATE_MCS2_LGI = 0x12, /**< MCS2 with long GI */ + WIFI_PHY_RATE_MCS3_LGI = 0x13, /**< MCS3 with long GI */ + WIFI_PHY_RATE_MCS4_LGI = 0x14, /**< MCS4 with long GI */ + WIFI_PHY_RATE_MCS5_LGI = 0x15, /**< MCS5 with long GI */ + WIFI_PHY_RATE_MCS6_LGI = 0x16, /**< MCS6 with long GI */ + WIFI_PHY_RATE_MCS7_LGI = 0x17, /**< MCS7 with long GI */ +#if CONFIG_SOC_WIFI_HE_SUPPORT + WIFI_PHY_RATE_MCS8_LGI, /**< MCS8 with long GI */ + WIFI_PHY_RATE_MCS9_LGI, /**< MCS9 with long GI */ +#endif + /* + ----------------------------------------------------------------------------------------------------------- + MCS RATE | HT20 | HT40 | HE20 | + WIFI_PHY_RATE_MCS0_SGI | 7.2 Mbps (400ns) | 15 Mbps (400ns) | 8.6 Mbps (800ns) | + WIFI_PHY_RATE_MCS1_SGI | 14.4 Mbps (400ns) | 30 Mbps (400ns) | 17.2 Mbps (800ns) | + WIFI_PHY_RATE_MCS2_SGI | 21.7 Mbps (400ns) | 45 Mbps (400ns) | 25.8 Mbps (800ns) | + WIFI_PHY_RATE_MCS3_SGI | 28.9 Mbps (400ns) | 60 Mbps (400ns) | 34.4 Mbps (800ns) | + WIFI_PHY_RATE_MCS4_SGI | 43.3 Mbps (400ns) | 90 Mbps (400ns) | 51.6 Mbps (800ns) | + WIFI_PHY_RATE_MCS5_SGI | 57.8 Mbps (400ns) | 120 Mbps (400ns) | 68.8 Mbps (800ns) | + WIFI_PHY_RATE_MCS6_SGI | 65 Mbps (400ns) | 135 Mbps (400ns) | 77.4 Mbps (800ns) | + WIFI_PHY_RATE_MCS7_SGI | 72.2 Mbps (400ns) | 150 Mbps (400ns) | 86 Mbps (800ns) | + WIFI_PHY_RATE_MCS8_SGI | ----- | ----- | 103.2 Mbps (800ns) | + WIFI_PHY_RATE_MCS9_SGI | ----- | ----- | 114.7 Mbps (800ns) | + ----------------------------------------------------------------------------------------------------------- + */ + WIFI_PHY_RATE_MCS0_SGI, /**< MCS0 with short GI */ + WIFI_PHY_RATE_MCS1_SGI, /**< MCS1 with short GI */ + WIFI_PHY_RATE_MCS2_SGI, /**< MCS2 with short GI */ + WIFI_PHY_RATE_MCS3_SGI, /**< MCS3 with short GI */ + WIFI_PHY_RATE_MCS4_SGI, /**< MCS4 with short GI */ + WIFI_PHY_RATE_MCS5_SGI, /**< MCS5 with short GI */ + WIFI_PHY_RATE_MCS6_SGI, /**< MCS6 with short GI */ + WIFI_PHY_RATE_MCS7_SGI, /**< MCS7 with short GI */ +#if CONFIG_SOC_WIFI_HE_SUPPORT + WIFI_PHY_RATE_MCS8_SGI, /**< MCS8 with short GI */ + WIFI_PHY_RATE_MCS9_SGI, /**< MCS9 with short GI */ +#endif + WIFI_PHY_RATE_LORA_250K = 0x29, /**< 250 Kbps */ + WIFI_PHY_RATE_LORA_500K = 0x2A, /**< 500 Kbps */ + WIFI_PHY_RATE_MAX, +} wifi_phy_rate_t; + +/** WiFi event declarations */ +typedef enum { + WIFI_EVENT_WIFI_READY = 0, /**< WiFi ready */ + WIFI_EVENT_SCAN_DONE, /**< Finished scanning AP */ + WIFI_EVENT_STA_START, /**< Station start */ + WIFI_EVENT_STA_STOP, /**< Station stop */ + WIFI_EVENT_STA_CONNECTED, /**< Station connected to AP */ + WIFI_EVENT_STA_DISCONNECTED, /**< Station disconnected from AP */ + WIFI_EVENT_STA_AUTHMODE_CHANGE, /**< the auth mode of AP connected by device's station changed */ + + WIFI_EVENT_STA_WPS_ER_SUCCESS, /**< Station wps succeeds in enrollee mode */ + WIFI_EVENT_STA_WPS_ER_FAILED, /**< Station wps fails in enrollee mode */ + WIFI_EVENT_STA_WPS_ER_TIMEOUT, /**< Station wps timeout in enrollee mode */ + WIFI_EVENT_STA_WPS_ER_PIN, /**< Station wps pin code in enrollee mode */ + WIFI_EVENT_STA_WPS_ER_PBC_OVERLAP, /**< Station wps overlap in enrollee mode */ + + WIFI_EVENT_AP_START, /**< Soft-AP start */ + WIFI_EVENT_AP_STOP, /**< Soft-AP stop */ + WIFI_EVENT_AP_STACONNECTED, /**< a station connected to Soft-AP */ + WIFI_EVENT_AP_STADISCONNECTED, /**< a station disconnected from Soft-AP */ + WIFI_EVENT_AP_PROBEREQRECVED, /**< Receive probe request packet in soft-AP interface */ + + WIFI_EVENT_FTM_REPORT, /**< Receive report of FTM procedure */ + + /* Add next events after this only */ + WIFI_EVENT_STA_BSS_RSSI_LOW, /**< AP's RSSI crossed configured threshold */ + WIFI_EVENT_ACTION_TX_STATUS, /**< Status indication of Action Tx operation */ + WIFI_EVENT_ROC_DONE, /**< Remain-on-Channel operation complete */ + + WIFI_EVENT_STA_BEACON_TIMEOUT, /**< Station beacon timeout */ + + WIFI_EVENT_CONNECTIONLESS_MODULE_WAKE_INTERVAL_START, /**< Connectionless module wake interval start */ + + WIFI_EVENT_AP_WPS_RG_SUCCESS, /**< Soft-AP wps succeeds in registrar mode */ + WIFI_EVENT_AP_WPS_RG_FAILED, /**< Soft-AP wps fails in registrar mode */ + WIFI_EVENT_AP_WPS_RG_TIMEOUT, /**< Soft-AP wps timeout in registrar mode */ + WIFI_EVENT_AP_WPS_RG_PIN, /**< Soft-AP wps pin code in registrar mode */ + WIFI_EVENT_AP_WPS_RG_PBC_OVERLAP, /**< Soft-AP wps overlap in registrar mode */ + + WIFI_EVENT_ITWT_SETUP, /**< iTWT setup */ + WIFI_EVENT_ITWT_TEARDOWN, /**< iTWT teardown */ + WIFI_EVENT_ITWT_PROBE, /**< iTWT probe */ + WIFI_EVENT_ITWT_SUSPEND, /**< iTWT suspend */ + + WIFI_EVENT_NAN_STARTED, /**< NAN Discovery has started */ + WIFI_EVENT_NAN_STOPPED, /**< NAN Discovery has stopped */ + WIFI_EVENT_NAN_SVC_MATCH, /**< NAN Service Discovery match found */ + WIFI_EVENT_NAN_REPLIED, /**< Replied to a NAN peer with Service Discovery match */ + WIFI_EVENT_NAN_RECEIVE, /**< Received a Follow-up message */ + WIFI_EVENT_NDP_INDICATION, /**< Received NDP Request from a NAN Peer */ + WIFI_EVENT_NDP_CONFIRM, /**< NDP Confirm Indication */ + WIFI_EVENT_NDP_TERMINATED, /**< NAN Datapath terminated indication */ + + WIFI_EVENT_MAX, /**< Invalid WiFi event ID */ +} wifi_event_t; + +/** @cond **/ +/** @brief WiFi event base declaration */ +ESP_EVENT_DECLARE_BASE(WIFI_EVENT); +/** @endcond **/ + +/** Argument structure for WIFI_EVENT_SCAN_DONE event */ +typedef struct { + uint32_t status; /**< status of scanning APs: 0 — success, 1 - failure */ + uint8_t number; /**< number of scan results */ + uint8_t scan_id; /**< scan sequence number, used for block scan */ +} wifi_event_sta_scan_done_t; + +/** Argument structure for WIFI_EVENT_STA_CONNECTED event */ +typedef struct { + uint8_t ssid[32]; /**< SSID of connected AP */ + uint8_t ssid_len; /**< SSID length of connected AP */ + uint8_t bssid[6]; /**< BSSID of connected AP*/ + uint8_t channel; /**< channel of connected AP*/ + wifi_auth_mode_t authmode;/**< authentication mode used by AP*/ + uint16_t aid; /**< authentication id assigned by the connected AP */ +} wifi_event_sta_connected_t; + +/** Argument structure for WIFI_EVENT_STA_DISCONNECTED event */ +typedef struct { + uint8_t ssid[32]; /**< SSID of disconnected AP */ + uint8_t ssid_len; /**< SSID length of disconnected AP */ + uint8_t bssid[6]; /**< BSSID of disconnected AP */ + uint8_t reason; /**< reason of disconnection */ + int8_t rssi; /**< rssi of disconnection */ +} wifi_event_sta_disconnected_t; + +/** Argument structure for WIFI_EVENT_STA_AUTHMODE_CHANGE event */ +typedef struct { + wifi_auth_mode_t old_mode; /**< the old auth mode of AP */ + wifi_auth_mode_t new_mode; /**< the new auth mode of AP */ +} wifi_event_sta_authmode_change_t; + +/** Argument structure for WIFI_EVENT_STA_WPS_ER_PIN event */ +typedef struct { + uint8_t pin_code[8]; /**< PIN code of station in enrollee mode */ +} wifi_event_sta_wps_er_pin_t; + +/** Argument structure for WIFI_EVENT_STA_WPS_ER_FAILED event */ +typedef enum { + WPS_FAIL_REASON_NORMAL = 0, /**< WPS normal fail reason */ + WPS_FAIL_REASON_RECV_M2D, /**< WPS receive M2D frame */ + WPS_FAIL_REASON_MAX +} wifi_event_sta_wps_fail_reason_t; + +#define MAX_SSID_LEN 32 +#define MAX_PASSPHRASE_LEN 64 +#define MAX_WPS_AP_CRED 3 + +/** Argument structure for WIFI_EVENT_STA_WPS_ER_SUCCESS event */ +typedef struct { + uint8_t ap_cred_cnt; /**< Number of AP credentials received */ + struct { + uint8_t ssid[MAX_SSID_LEN]; /**< SSID of AP */ + uint8_t passphrase[MAX_PASSPHRASE_LEN]; /**< Passphrase for the AP */ + } ap_cred[MAX_WPS_AP_CRED]; /**< All AP credentials received from WPS handshake */ +} wifi_event_sta_wps_er_success_t; + +/** Argument structure for WIFI_EVENT_AP_STACONNECTED event */ +typedef struct { + uint8_t mac[6]; /**< MAC address of the station connected to Soft-AP */ + uint8_t aid; /**< the aid that soft-AP gives to the station connected to */ + bool is_mesh_child; /**< flag to identify mesh child */ +} wifi_event_ap_staconnected_t; + +/** Argument structure for WIFI_EVENT_AP_STADISCONNECTED event */ +typedef struct { + uint8_t mac[6]; /**< MAC address of the station disconnects to soft-AP */ + uint8_t aid; /**< the aid that soft-AP gave to the station disconnects to */ + bool is_mesh_child; /**< flag to identify mesh child */ + uint8_t reason; /**< reason of disconnection */ +} wifi_event_ap_stadisconnected_t; + +/** Argument structure for WIFI_EVENT_AP_PROBEREQRECVED event */ +typedef struct { + int rssi; /**< Received probe request signal strength */ + uint8_t mac[6]; /**< MAC address of the station which send probe request */ +} wifi_event_ap_probe_req_rx_t; + +/** Argument structure for WIFI_EVENT_STA_BSS_RSSI_LOW event */ +typedef struct { + int32_t rssi; /**< RSSI value of bss */ +} wifi_event_bss_rssi_low_t; + +/** + * @brief FTM operation status types + * + */ +typedef enum { + FTM_STATUS_SUCCESS = 0, /**< FTM exchange is successful */ + FTM_STATUS_UNSUPPORTED, /**< Peer does not support FTM */ + FTM_STATUS_CONF_REJECTED, /**< Peer rejected FTM configuration in FTM Request */ + FTM_STATUS_NO_RESPONSE, /**< Peer did not respond to FTM Requests */ + FTM_STATUS_FAIL, /**< Unknown error during FTM exchange */ +} wifi_ftm_status_t; + +/** Argument structure for */ +typedef struct { + uint8_t dlog_token; /**< Dialog Token of the FTM frame */ + int8_t rssi; /**< RSSI of the FTM frame received */ + uint32_t rtt; /**< Round Trip Time in pSec with a peer */ + uint64_t t1; /**< Time of departure of FTM frame from FTM Responder in pSec */ + uint64_t t2; /**< Time of arrival of FTM frame at FTM Initiator in pSec */ + uint64_t t3; /**< Time of departure of ACK from FTM Initiator in pSec */ + uint64_t t4; /**< Time of arrival of ACK at FTM Responder in pSec */ +} wifi_ftm_report_entry_t; + +/** Argument structure for WIFI_EVENT_FTM_REPORT event */ +typedef struct { + uint8_t peer_mac[6]; /**< MAC address of the FTM Peer */ + wifi_ftm_status_t status; /**< Status of the FTM operation */ + uint32_t rtt_raw; /**< Raw average Round-Trip-Time with peer in Nano-Seconds */ + uint32_t rtt_est; /**< Estimated Round-Trip-Time with peer in Nano-Seconds */ + uint32_t dist_est; /**< Estimated one-way distance in Centi-Meters */ + wifi_ftm_report_entry_t *ftm_report_data; /**< Pointer to FTM Report with multiple entries, should be freed after use */ + uint8_t ftm_report_num_entries; /**< Number of entries in the FTM Report data */ +} wifi_event_ftm_report_t; + +#define WIFI_STATIS_BUFFER (1<<0) +#define WIFI_STATIS_RXTX (1<<1) +#define WIFI_STATIS_HW (1<<2) +#define WIFI_STATIS_DIAG (1<<3) +#define WIFI_STATIS_PS (1<<4) +#define WIFI_STATIS_ALL (-1) + +/** Argument structure for WIFI_EVENT_ACTION_TX_STATUS event */ +typedef struct { + wifi_interface_t ifx; /**< WiFi interface to send request to */ + uint32_t context; /**< Context to identify the request */ + uint8_t da[6]; /**< Destination MAC address */ + uint8_t status; /**< Status of the operation */ +} wifi_event_action_tx_status_t; + +/** Argument structure for WIFI_EVENT_ROC_DONE event */ +typedef struct { + uint32_t context; /**< Context to identify the request */ +} wifi_event_roc_done_t; + +/** Argument structure for WIFI_EVENT_AP_WPS_RG_PIN event */ +typedef struct { + uint8_t pin_code[8]; /**< PIN code of station in enrollee mode */ +} wifi_event_ap_wps_rg_pin_t; + +typedef enum { + WPS_AP_FAIL_REASON_NORMAL = 0, /**< WPS normal fail reason */ + WPS_AP_FAIL_REASON_CONFIG, /**< WPS failed due to incorrect config */ + WPS_AP_FAIL_REASON_AUTH, /**< WPS failed during auth */ + WPS_AP_FAIL_REASON_MAX, +} wps_fail_reason_t; + +/** Argument structure for WIFI_EVENT_AP_WPS_RG_FAILED event */ +typedef struct { + wps_fail_reason_t reason; /**< WPS failure reason wps_fail_reason_t */ + uint8_t peer_macaddr[6]; /**< Enrollee mac address */ +} wifi_event_ap_wps_rg_fail_reason_t; + +/** Argument structure for WIFI_EVENT_AP_WPS_RG_SUCCESS event */ +typedef struct { + uint8_t peer_macaddr[6]; /**< Enrollee mac address */ +} wifi_event_ap_wps_rg_success_t; + +/** Argument structure for WIFI_EVENT_NAN_SVC_MATCH event */ +typedef struct { + uint8_t subscribe_id; /**< Subscribe Service Identifier */ + uint8_t publish_id; /**< Publish Service Identifier */ + uint8_t pub_if_mac[6]; /**< NAN Interface MAC of the Publisher */ + bool update_pub_id; /**< Indicates whether publisher's service ID needs to be updated */ +} wifi_event_nan_svc_match_t; + +/** Argument structure for WIFI_EVENT_NAN_REPLIED event */ +typedef struct { + uint8_t publish_id; /**< Publish Service Identifier */ + uint8_t subscribe_id; /**< Subscribe Service Identifier */ + uint8_t sub_if_mac[6]; /**< NAN Interface MAC of the Subscriber */ +} wifi_event_nan_replied_t; + +/** Argument structure for WIFI_EVENT_NAN_RECEIVE event */ +typedef struct { + uint8_t inst_id; /**< Our Service Identifier */ + uint8_t peer_inst_id; /**< Peer's Service Identifier */ + uint8_t peer_if_mac[6]; /**< Peer's NAN Interface MAC */ + uint8_t peer_svc_info[ESP_WIFI_MAX_SVC_INFO_LEN];/**< Peer Service Info */ +} wifi_event_nan_receive_t; + +/** Argument structure for WIFI_EVENT_NDP_INDICATION event */ +typedef struct { + uint8_t publish_id; /**< Publish Id for NAN Service */ + uint8_t ndp_id; /**< NDP instance id */ + uint8_t peer_nmi[6]; /**< Peer's NAN Management Interface MAC */ + uint8_t peer_ndi[6]; /**< Peer's NAN Data Interface MAC */ + uint8_t svc_info[ESP_WIFI_MAX_SVC_INFO_LEN];/**< Service Specific Info */ +} wifi_event_ndp_indication_t; + +/** Argument structure for WIFI_EVENT_NDP_CONFIRM event */ +typedef struct { + uint8_t status; /**< NDP status code */ + uint8_t ndp_id; /**< NDP instance id */ + uint8_t peer_nmi[6]; /**< Peer's NAN Management Interface MAC */ + uint8_t peer_ndi[6]; /**< Peer's NAN Data Interface MAC */ + uint8_t own_ndi[6]; /**< Own NAN Data Interface MAC */ + uint8_t svc_info[ESP_WIFI_MAX_SVC_INFO_LEN];/**< Service Specific Info */ +} wifi_event_ndp_confirm_t; + +/** Argument structure for WIFI_EVENT_NDP_TERMINATED event */ +typedef struct { + uint8_t reason; /**< Termination reason code */ + uint8_t ndp_id; /**< NDP instance id */ + uint8_t init_ndi[6]; /**< Initiator's NAN Data Interface MAC */ +} wifi_event_ndp_terminated_t; + +#ifdef __cplusplus +} +#endif + +#endif /* __ESP_WIFI_TYPES_H__ */ diff --git a/espradio/blobs/headers/esp_wpa.h b/espradio/blobs/headers/esp_wpa.h new file mode 100644 index 000000000..5e232486c --- /dev/null +++ b/espradio/blobs/headers/esp_wpa.h @@ -0,0 +1,72 @@ +/* + * SPDX-FileCopyrightText: 2019-2022 Espressif Systems (Shanghai) CO LTD + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#ifndef __ESP_WPA_H__ +#define __ESP_WPA_H__ + +#include +#include +#include "esp_err.h" +#include "esp_wifi_crypto_types.h" +#include "esp_wifi_types.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/** \defgroup WiFi_APIs WiFi Related APIs + * @brief WiFi APIs + */ + +/** @addtogroup WiFi_APIs + * @{ + */ + +/** \defgroup WPA_APIs WPS APIs + * @brief Supplicant APIs + * + */ + +/** @addtogroup WPA_APIs + * @{ + */ +/* Crypto callback functions */ +extern const wpa_crypto_funcs_t g_wifi_default_wpa_crypto_funcs; // NOLINT(readability-redundant-declaration) + +/* Mesh crypto callback functions */ +extern const mesh_crypto_funcs_t g_wifi_default_mesh_crypto_funcs; + +/** + * @brief Supplicant initialization + * + * @return + * - ESP_OK : succeed + * - ESP_ERR_NO_MEM : out of memory + */ +esp_err_t esp_supplicant_init(void); + +/** + * @brief Supplicant deinitialization + * + * @return + * - ESP_OK : succeed + * - others: failed + */ +esp_err_t esp_supplicant_deinit(void); + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __ESP_WPA_H__ */ diff --git a/espradio/blobs/headers/esp_wpa2.h b/espradio/blobs/headers/esp_wpa2.h new file mode 100644 index 000000000..3f3b78934 --- /dev/null +++ b/espradio/blobs/headers/esp_wpa2.h @@ -0,0 +1,329 @@ +/* + * SPDX-FileCopyrightText: 2019-2021 Espressif Systems (Shanghai) CO LTD + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#ifndef _ESP_WPA2_H +#define _ESP_WPA2_H + +#pragma message("esp_wpa2.h is deprecated. Use esp_eap_client.h instead.") + +#include "esp_eap_client.h" + +/** + * @brief Enable wpa2 enterprise authentication. + * + * @deprecated This function is deprecated and will be removed in the future. + * Please use `esp_wifi_sta_enterprise_enable()` instead. + * + * @attention 1. wpa2 enterprise authentication can only be used when station mode is enabled. + * @attention 2. wpa2 enterprise authentication supports EAP-FAST, TLS, PEAP, TTLS(EAP, MSCHAPv2, MSCHAP, PAP, CHAP) methods. + * + * @return + * - ESP_OK: succeed. + * - ESP_ERR_NO_MEM: fail(internal memory malloc fail) + */ +__attribute__((deprecated("Use 'esp_wifi_sta_enterprise_enable' instead"))) +esp_err_t esp_wifi_sta_wpa2_ent_enable(void); + +/** + * @brief Disable wpa2 enterprise authentication. + * + * @deprecated This function is deprecated and will be removed in the future. + * Please use `esp_wifi_sta_enterprise_disable()` instead. + * + * @attention 1. wpa2 enterprise authentication can only be used when station mode is enabled. + * @attention 2. wpa2 enterprise authentication supports EAP-FAST, TLS, PEAP, TTLS(EAP, MSCHAPv2, MSCHAP, PAP, CHAP) methods. + * + * @return + * - ESP_OK: succeed. + */ +__attribute__((deprecated("Use 'esp_wifi_sta_enterprise_disable' instead"))) +esp_err_t esp_wifi_sta_wpa2_ent_disable(void); + +/** + * @brief Set identity for PEAP/TTLS method. + * + * @deprecated This function is deprecated and will be removed in the future. + * Please use `esp_eap_client_set_identity` instead. + * + * @attention The API only passes the parameter identity to the global pointer variable in wpa2 enterprise module. + * + * @param identity: point to address where stores the identity; + * @param len: length of identity, limited to 1~127 + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_INVALID_ARG: fail(len <= 0 or len >= 128) + * - ESP_ERR_NO_MEM: fail(internal memory malloc fail) + */ +__attribute__((deprecated("Use 'esp_eap_client_set_identity' instead"))) +esp_err_t esp_wifi_sta_wpa2_ent_set_identity(const unsigned char *identity, int len); + +/** + * @brief Clear identity for PEAP/TTLS method. + * + * @deprecated This function is deprecated and will be removed in the future. + * Please use `esp_eap_client_clear_identity` instead. + * + */ +__attribute__((deprecated("Use 'esp_eap_client_clear_identity' instead"))) +void esp_wifi_sta_wpa2_ent_clear_identity(void); + +/** + * @brief Set username for PEAP/TTLS method. + * + * @deprecated This function is deprecated and will be removed in the future. + * Please use `esp_eap_client_set_username` instead. + * + * @param username: point to address where stores the username; + * @param len: length of username, limited to 1~127 + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_INVALID_ARG: fail(len <= 0 or len >= 128) + * - ESP_ERR_NO_MEM: fail(internal memory malloc fail) + */ +__attribute__((deprecated("Use 'esp_eap_client_set_username' instead"))) +esp_err_t esp_wifi_sta_wpa2_ent_set_username(const unsigned char *username, int len); + +/** + * @brief Clear username for PEAP/TTLS method. + * @deprecated This function is deprecated and will be removed in the future. + * Please use `esp_eap_client_clear_username` instead. + * + */ +__attribute__((deprecated("Use 'esp_eap_client_clear_username' instead"))) +void esp_wifi_sta_wpa2_ent_clear_username(void); + +/** + * @brief Set password for PEAP/TTLS method.. + * + * @deprecated This function is deprecated and will be removed in the future. + * Please use `esp_eap_client_set_password` instead. + * + * @param password: point to address where stores the password; + * @param len: length of password(len > 0) + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_INVALID_ARG: fail(len <= 0) + * - ESP_ERR_NO_MEM: fail(internal memory malloc fail) + */ +__attribute__((deprecated("Use 'esp_eap_client_set_password' instead"))) +esp_err_t esp_wifi_sta_wpa2_ent_set_password(const unsigned char *password, int len); + +/** + * @brief Clear password for PEAP/TTLS method.. + * + * @deprecated This function is deprecated and will be removed in the future. + * Please use `esp_eap_client_clear_password` instead. + */ +__attribute__((deprecated("Use 'esp_eap_client_clear_password' instead"))) +void esp_wifi_sta_wpa2_ent_clear_password(void); + +/** + * @brief Set new password for MSCHAPv2 method.. + * + * @deprecated This function is deprecated and will be removed in the future. + * Please use `esp_eap_client_set_new_password` instead. + * + * @attention 1. The new password is used to substitute the old password when eap-mschapv2 failure request message with error code ERROR_PASSWD_EXPIRED is received. + * + * @param new_password: point to address where stores the password; + * @param len: length of password + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_INVALID_ARG: fail(len <= 0) + * - ESP_ERR_NO_MEM: fail(internal memory malloc fail) + */ +__attribute__((deprecated("Use 'esp_eap_client_set_new_password' instead"))) +esp_err_t esp_wifi_sta_wpa2_ent_set_new_password(const unsigned char *new_password, int len); + +/** + * @brief Clear new password for MSCHAPv2 method.. + * + * @deprecated This function is deprecated and will be removed in the future. + * Please use `esp_eap_client_clear_new_password` instead. + * + */ +__attribute__((deprecated("Use 'esp_eap_client_clear_new_password' instead"))) +void esp_wifi_sta_wpa2_ent_clear_new_password(void); + +/** + * @brief Set CA certificate for PEAP/TTLS method. + * + * @deprecated This function is deprecated and will be removed in the future. + * Please use `esp_eap_client_set_ca_cert` instead. + * + * @attention 1. The API only passes the parameter ca_cert to the global pointer variable in wpa2 enterprise module. + * @attention 2. The ca_cert should be zero terminated. + * + * @param ca_cert: point to address where stores the CA certificate; + * @param ca_cert_len: length of ca_cert + * + * @return + * - ESP_OK: succeed + */ +__attribute__((deprecated("Use 'esp_eap_client_set_ca_cert' instead"))) +esp_err_t esp_wifi_sta_wpa2_ent_set_ca_cert(const unsigned char *ca_cert, int ca_cert_len); + +/** + * @brief Clear CA certificate for PEAP/TTLS method. + * + * @deprecated This function is deprecated and will be removed in the future. + * Please use `esp_eap_client_clear_ca_cert` instead. + * + */ +__attribute__((deprecated("Use 'esp_eap_client_clear_ca_cert' instead"))) +void esp_wifi_sta_wpa2_ent_clear_ca_cert(void); + +/** + * @brief Set client certificate and key. + * + * @deprecated This function is deprecated and will be removed in the future. + * Please use `esp_eap_client_set_certificate_and_key` instead. + * + * @attention 1. The API only passes the parameter client_cert, private_key and private_key_passwd to the global pointer variable in wpa2 enterprise module. + * @attention 2. The client_cert, private_key and private_key_passwd should be zero terminated. + * + * @param client_cert: point to address where stores the client certificate; + * @param client_cert_len: length of client certificate; + * @param private_key: point to address where stores the private key; + * @param private_key_len: length of private key, limited to 1~2048; + * @param private_key_password: point to address where stores the private key password; + * @param private_key_password_len: length of private key password; + * + * @return + * - ESP_OK: succeed + */ +__attribute__((deprecated("Use 'esp_eap_client_set_certificate_and_key' instead"))) +esp_err_t esp_wifi_sta_wpa2_ent_set_cert_key(const unsigned char *client_cert, int client_cert_len, + const unsigned char *private_key, int private_key_len, + const unsigned char *private_key_passwd, int private_key_passwd_len); + +/** + * @brief Clear client certificate and key. + * + * @deprecated This function is deprecated and will be removed in the future. + * Please use `esp_eap_client_clear_certificate_and_key` instead. + * + */ +__attribute__((deprecated("Use 'esp_eap_client_clear_certificate_and_key' instead"))) +void esp_wifi_sta_wpa2_ent_clear_cert_key(void); + +/** + * @brief Set wpa2 enterprise certs time check(disable or not). + * + * @deprecated This function is deprecated and will be removed in the future. + * Please use `esp_eap_client_set_disable_time_check` instead. + * + * @param true: disable wpa2 enterprise certs time check + * @param false: enable wpa2 enterprise certs time check + * + * @return + * - ESP_OK: succeed + */ +__attribute__((deprecated("Use 'esp_eap_client_set_disable_time_check' instead"))) +esp_err_t esp_wifi_sta_wpa2_ent_set_disable_time_check(bool disable); + +/** + * @brief Get wpa2 enterprise certs time check(disable or not). + * + * @deprecated This function is deprecated and will be removed in the future. + * Please use `esp_eap_client_get_disable_time_check` instead. + * + * @param disable: store disable value + * + * @return + * - ESP_OK: succeed + */ +__attribute__((deprecated("Use 'esp_eap_client_get_disable_time_check' instead"))) +esp_err_t esp_wifi_sta_wpa2_ent_get_disable_time_check(bool *disable); + +/** + * @brief Set wpa2 enterprise ttls phase2 method + * + * @deprecated This function is deprecated and will be removed in the future. + * Please use `esp_eap_client_set_ttls_phase2_method` instead. + * + * @param type: the type of phase 2 method to be used + * + * @return + * - ESP_OK: succeed + */ +__attribute__((deprecated("Use 'esp_eap_client_set_ttls_phase2_method' instead"))) +esp_err_t esp_wifi_sta_wpa2_ent_set_ttls_phase2_method(esp_eap_ttls_phase2_types type); + +/** + * @brief enable/disable 192 bit suite b certification checks + * + * @deprecated This function is deprecated and will be removed in the future. + * Please use `esp_eap_client_set_suiteb_192bit_certification` instead. + * + * @param enable: bool to enable/disable it. + * + * @return + * - ESP_OK: succeed + */ +__attribute__((deprecated("Use 'esp_eap_client_set_suiteb_192bit_certification' instead"))) +esp_err_t esp_wifi_sta_wpa2_set_suiteb_192bit_certification(bool enable); + +/** + * @brief Set client pac file + * + * @deprecated This function is deprecated and will be removed in the future. + * Please use `esp_eap_client_set_pac_file` instead. + * + * @attention 1. For files read from the file system, length has to be decremented by 1 byte. + * @attention 2. Disabling the ESP_WIFI_MBEDTLS_TLS_CLIENT config is required to use EAP-FAST. + * + * @param pac_file: pointer to the pac file + * pac_file_len: length of the pac file + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_NO_MEM: fail(internal memory malloc fail) + */ +__attribute__((deprecated("Use 'esp_eap_client_set_pac_file' instead"))) +esp_err_t esp_wifi_sta_wpa2_ent_set_pac_file(const unsigned char *pac_file, int pac_file_len); + +/** + * @brief Set Phase 1 parameters for EAP-FAST + * + * @deprecated This function is deprecated and will be removed in the future. + * Please use `esp_eap_client_set_fast_params` instead. + * + * @attention 1. Disabling the ESP_WIFI_MBEDTLS_TLS_CLIENT config is required to use EAP-FAST. + * + * @param config: eap fast phase 1 configuration + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_INVALID_ARG: fail(out of bound arguments) + * - ESP_ERR_NO_MEM: fail(internal memory malloc fail) + */ +__attribute__((deprecated("Use 'esp_eap_client_set_fast_params' instead"))) +esp_err_t esp_wifi_sta_wpa2_ent_set_fast_phase1_params(esp_eap_fast_config config); + +/** + * @brief Use default CA cert bundle for server validation + * + * @deprecated This function is deprecated and will be removed in the future. + * Please use `esp_eap_client_use_default_cert_bundle` instead. + * + * @use_default_bundle : whether to use bundle or not + * + * @return + * - ESP_OK: succeed + * - ESP_FAIL: fail + */ +__attribute__((deprecated("Use 'esp_eap_client_use_default_cert_bundle' instead"))) +esp_err_t esp_wifi_sta_wpa2_use_default_cert_bundle(bool use_default_bundle); + +#ifdef __cplusplus +} +#endif +#endif diff --git a/espradio/blobs/headers/espidf_types.h b/espradio/blobs/headers/espidf_types.h new file mode 100644 index 000000000..f2f3089bd --- /dev/null +++ b/espradio/blobs/headers/espidf_types.h @@ -0,0 +1,49 @@ +// Copyright 2020 Espressif Systems (Shanghai) PTE LTD +// +// Licensed under the Apache License, Version 2.0 (the "License"); +// you may not use this file except in compliance with the License. +// You may obtain a copy of the License at +// http://www.apache.org/licenses/LICENSE-2.0 +// +// Unless required by applicable law or agreed to in writing, software +// distributed under the License is distributed on an "AS IS" BASIS, +// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +// See the License for the specific language governing permissions and +// limitations under the License. + +#ifndef _ESPIDF_TYPES_H_ +#define _ESPIDF_TYPES_H_ + +#include + +#define IDF_DEPRECATED(_s) + +enum esp_log_level_e +{ + ESP_LOG_NONE, + ESP_LOG_ERROR, + ESP_LOG_WARN, + ESP_LOG_INFO, + ESP_LOG_DEBUG, + ESP_LOG_VERBOSE +}; + +typedef uint32_t TickType_t; +typedef uint32_t UBaseType_t; +typedef int32_t BaseType_t; + +typedef void* QueueHandle_t; + +typedef void* esp_netif_t; +typedef void* esp_netif_inherent_config_t; + +struct ets_timer +{ + struct timer_adpt *next; + uint32_t expire; + uint32_t period; + void (*func)(void *priv); + void *priv; +}; + +#endif /* _ESPIDF_TYPES_H_ */ diff --git a/espradio/blobs/headers/espidf_wifi.h b/espradio/blobs/headers/espidf_wifi.h new file mode 100644 index 000000000..ffb66e565 --- /dev/null +++ b/espradio/blobs/headers/espidf_wifi.h @@ -0,0 +1,30 @@ +// Copyright 2020 Espressif Systems (Shanghai) PTE LTD +// +// Licensed under the Apache License, Version 2.0 (the "License"); +// you may not use this file except in compliance with the License. +// You may obtain a copy of the License at +// http://www.apache.org/licenses/LICENSE-2.0 +// +// Unless required by applicable law or agreed to in writing, software +// distributed under the License is distributed on an "AS IS" BASIS, +// WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. +// See the License for the specific language governing permissions and +// limitations under the License. + +#ifndef _ESPIDF_WIFI_H_ +#define _ESPIDF_WIFI_H_ + +#include "sdkconfig.h" +#include "espidf_types.h" +#include "esp_private/wifi_os_adapter.h" +#include "esp_phy_init.h" +#include "esp_private/wifi.h" +#include "phy.h" +#include "phy_init_data.h" +#include "nvs.h" +#include "esp_wpa.h" +#include "esp_timer.h" +#include "esp_system.h" +#include "esp_wpa2.h" + +#endif /* _ESPIDF_WIFI_H_ */ diff --git a/espradio/blobs/headers/nvs.h b/espradio/blobs/headers/nvs.h new file mode 100644 index 000000000..0185a72f2 --- /dev/null +++ b/espradio/blobs/headers/nvs.h @@ -0,0 +1,706 @@ +/* + * SPDX-FileCopyrightText: 2015-2022 Espressif Systems (Shanghai) CO LTD + * + * SPDX-License-Identifier: Apache-2.0 + */ +#ifndef ESP_NVS_H +#define ESP_NVS_H + +#include +#include +#include +#include "esp_err.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * Opaque pointer type representing non-volatile storage handle + */ +typedef uint32_t nvs_handle_t; + +/* + * Pre-IDF V4.0 uses nvs_handle, so leaving the original typedef here for compatibility. + */ +typedef nvs_handle_t nvs_handle IDF_DEPRECATED("Replace with nvs_handle_t"); + +#define ESP_ERR_NVS_BASE 0x1100 /*!< Starting number of error codes */ +#define ESP_ERR_NVS_NOT_INITIALIZED (ESP_ERR_NVS_BASE + 0x01) /*!< The storage driver is not initialized */ +#define ESP_ERR_NVS_NOT_FOUND (ESP_ERR_NVS_BASE + 0x02) /*!< A requested entry couldn't be found or namespace doesn’t exist yet and mode is NVS_READONLY */ +#define ESP_ERR_NVS_TYPE_MISMATCH (ESP_ERR_NVS_BASE + 0x03) /*!< The type of set or get operation doesn't match the type of value stored in NVS */ +#define ESP_ERR_NVS_READ_ONLY (ESP_ERR_NVS_BASE + 0x04) /*!< Storage handle was opened as read only */ +#define ESP_ERR_NVS_NOT_ENOUGH_SPACE (ESP_ERR_NVS_BASE + 0x05) /*!< There is not enough space in the underlying storage to save the value */ +#define ESP_ERR_NVS_INVALID_NAME (ESP_ERR_NVS_BASE + 0x06) /*!< Namespace name doesn’t satisfy constraints */ +#define ESP_ERR_NVS_INVALID_HANDLE (ESP_ERR_NVS_BASE + 0x07) /*!< Handle has been closed or is NULL */ +#define ESP_ERR_NVS_REMOVE_FAILED (ESP_ERR_NVS_BASE + 0x08) /*!< The value wasn’t updated because flash write operation has failed. The value was written however, and update will be finished after re-initialization of nvs, provided that flash operation doesn’t fail again. */ +#define ESP_ERR_NVS_KEY_TOO_LONG (ESP_ERR_NVS_BASE + 0x09) /*!< Key name is too long */ +#define ESP_ERR_NVS_PAGE_FULL (ESP_ERR_NVS_BASE + 0x0a) /*!< Internal error; never returned by nvs API functions */ +#define ESP_ERR_NVS_INVALID_STATE (ESP_ERR_NVS_BASE + 0x0b) /*!< NVS is in an inconsistent state due to a previous error. Call nvs_flash_init and nvs_open again, then retry. */ +#define ESP_ERR_NVS_INVALID_LENGTH (ESP_ERR_NVS_BASE + 0x0c) /*!< String or blob length is not sufficient to store data */ +#define ESP_ERR_NVS_NO_FREE_PAGES (ESP_ERR_NVS_BASE + 0x0d) /*!< NVS partition doesn't contain any empty pages. This may happen if NVS partition was truncated. Erase the whole partition and call nvs_flash_init again. */ +#define ESP_ERR_NVS_VALUE_TOO_LONG (ESP_ERR_NVS_BASE + 0x0e) /*!< Value doesn't fit into the entry or string or blob length is longer than supported by the implementation */ +#define ESP_ERR_NVS_PART_NOT_FOUND (ESP_ERR_NVS_BASE + 0x0f) /*!< Partition with specified name is not found in the partition table */ + +#define ESP_ERR_NVS_NEW_VERSION_FOUND (ESP_ERR_NVS_BASE + 0x10) /*!< NVS partition contains data in new format and cannot be recognized by this version of code */ +#define ESP_ERR_NVS_XTS_ENCR_FAILED (ESP_ERR_NVS_BASE + 0x11) /*!< XTS encryption failed while writing NVS entry */ +#define ESP_ERR_NVS_XTS_DECR_FAILED (ESP_ERR_NVS_BASE + 0x12) /*!< XTS decryption failed while reading NVS entry */ +#define ESP_ERR_NVS_XTS_CFG_FAILED (ESP_ERR_NVS_BASE + 0x13) /*!< XTS configuration setting failed */ +#define ESP_ERR_NVS_XTS_CFG_NOT_FOUND (ESP_ERR_NVS_BASE + 0x14) /*!< XTS configuration not found */ +#define ESP_ERR_NVS_ENCR_NOT_SUPPORTED (ESP_ERR_NVS_BASE + 0x15) /*!< NVS encryption is not supported in this version */ +#define ESP_ERR_NVS_KEYS_NOT_INITIALIZED (ESP_ERR_NVS_BASE + 0x16) /*!< NVS key partition is uninitialized */ +#define ESP_ERR_NVS_CORRUPT_KEY_PART (ESP_ERR_NVS_BASE + 0x17) /*!< NVS key partition is corrupt */ +#define ESP_ERR_NVS_WRONG_ENCRYPTION (ESP_ERR_NVS_BASE + 0x19) /*!< NVS partition is marked as encrypted with generic flash encryption. This is forbidden since the NVS encryption works differently. */ + +#define ESP_ERR_NVS_CONTENT_DIFFERS (ESP_ERR_NVS_BASE + 0x18) /*!< Internal error; never returned by nvs API functions. NVS key is different in comparison */ + +#define NVS_DEFAULT_PART_NAME "nvs" /*!< Default partition name of the NVS partition in the partition table */ + +#define NVS_PART_NAME_MAX_SIZE 16 /*!< maximum length of partition name (excluding null terminator) */ +#define NVS_KEY_NAME_MAX_SIZE 16 /*!< Maximum length of NVS key name (including null terminator) */ +#define NVS_NS_NAME_MAX_SIZE NVS_KEY_NAME_MAX_SIZE /*!< Maximum length of NVS namespace name (including null terminator) */ + +/** + * @brief Mode of opening the non-volatile storage + */ +typedef enum { + NVS_READONLY, /*!< Read only */ + NVS_READWRITE /*!< Read and write */ +} nvs_open_mode_t; + +/* + * Pre-IDF V4.0 uses nvs_open_mode, so leaving the original typedef here for compatibility. + */ +typedef nvs_open_mode_t nvs_open_mode IDF_DEPRECATED("Replace with nvs_open_mode_t"); + + +/** + * @brief Types of variables + * + */ +typedef enum { + NVS_TYPE_U8 = 0x01, /*!< Type uint8_t */ + NVS_TYPE_I8 = 0x11, /*!< Type int8_t */ + NVS_TYPE_U16 = 0x02, /*!< Type uint16_t */ + NVS_TYPE_I16 = 0x12, /*!< Type int16_t */ + NVS_TYPE_U32 = 0x04, /*!< Type uint32_t */ + NVS_TYPE_I32 = 0x14, /*!< Type int32_t */ + NVS_TYPE_U64 = 0x08, /*!< Type uint64_t */ + NVS_TYPE_I64 = 0x18, /*!< Type int64_t */ + NVS_TYPE_STR = 0x21, /*!< Type string */ + NVS_TYPE_BLOB = 0x42, /*!< Type blob */ + NVS_TYPE_ANY = 0xff /*!< Must be last */ +} nvs_type_t; + +/** + * @brief information about entry obtained from nvs_entry_info function + */ +typedef struct { + char namespace_name[NVS_NS_NAME_MAX_SIZE]; /*!< Namespace to which key-value belong */ + char key[NVS_KEY_NAME_MAX_SIZE]; /*!< Key of stored key-value pair */ + nvs_type_t type; /*!< Type of stored key-value pair */ +} nvs_entry_info_t; + +/** + * Opaque pointer type representing iterator to nvs entries + */ +typedef struct nvs_opaque_iterator_t *nvs_iterator_t; + +/** + * @brief Open non-volatile storage with a given namespace from the default NVS partition + * + * Multiple internal ESP-IDF and third party application modules can store + * their key-value pairs in the NVS module. In order to reduce possible + * conflicts on key names, each module can use its own namespace. + * The default NVS partition is the one that is labelled "nvs" in the partition + * table. + * + * @param[in] namespace_name Namespace name. Maximum length is (NVS_KEY_NAME_MAX_SIZE-1) characters. Shouldn't be empty. + * @param[in] open_mode NVS_READWRITE or NVS_READONLY. If NVS_READONLY, will + * open a handle for reading only. All write requests will + * be rejected for this handle. + * @param[out] out_handle If successful (return code is zero), handle will be + * returned in this argument. + * + * @return + * - ESP_OK if storage handle was opened successfully + * - ESP_FAIL if there is an internal error; most likely due to corrupted + * NVS partition (only if NVS assertion checks are disabled) + * - ESP_ERR_NVS_NOT_INITIALIZED if the storage driver is not initialized + * - ESP_ERR_NVS_PART_NOT_FOUND if the partition with label "nvs" is not found + * - ESP_ERR_NVS_NOT_FOUND id namespace doesn't exist yet and + * mode is NVS_READONLY + * - ESP_ERR_NVS_INVALID_NAME if namespace name doesn't satisfy constraints + * - ESP_ERR_NO_MEM in case memory could not be allocated for the internal structures + * - ESP_ERR_NVS_NOT_ENOUGH_SPACE if there is no space for a new entry or there are too many different + * namespaces (maximum allowed different namespaces: 254) + * - other error codes from the underlying storage driver + */ +esp_err_t nvs_open(const char* namespace_name, nvs_open_mode_t open_mode, nvs_handle_t *out_handle); + +/** + * @brief Open non-volatile storage with a given namespace from specified partition + * + * The behaviour is same as nvs_open() API. However this API can operate on a specified NVS + * partition instead of default NVS partition. Note that the specified partition must be registered + * with NVS using nvs_flash_init_partition() API. + * + * @param[in] part_name Label (name) of the partition of interest for object read/write/erase + * @param[in] namespace_name Namespace name. Maximum length is (NVS_KEY_NAME_MAX_SIZE-1) characters. Shouldn't be empty. + * @param[in] open_mode NVS_READWRITE or NVS_READONLY. If NVS_READONLY, will + * open a handle for reading only. All write requests will + * be rejected for this handle. + * @param[out] out_handle If successful (return code is zero), handle will be + * returned in this argument. + * + * @return + * - ESP_OK if storage handle was opened successfully + * - ESP_FAIL if there is an internal error; most likely due to corrupted + * NVS partition (only if NVS assertion checks are disabled) + * - ESP_ERR_NVS_NOT_INITIALIZED if the storage driver is not initialized + * - ESP_ERR_NVS_PART_NOT_FOUND if the partition with specified name is not found + * - ESP_ERR_NVS_NOT_FOUND id namespace doesn't exist yet and + * mode is NVS_READONLY + * - ESP_ERR_NVS_INVALID_NAME if namespace name doesn't satisfy constraints + * - ESP_ERR_NO_MEM in case memory could not be allocated for the internal structures + * - ESP_ERR_NVS_NOT_ENOUGH_SPACE if there is no space for a new entry or there are too many different + * namespaces (maximum allowed different namespaces: 254) + * - other error codes from the underlying storage driver + */ +esp_err_t nvs_open_from_partition(const char *part_name, const char* namespace_name, nvs_open_mode_t open_mode, nvs_handle_t *out_handle); + +/**@{*/ +/** + * @brief set int8_t value for given key + * + * Set value for the key, given its name. Note that the actual storage will not be updated + * until \c nvs_commit is called. + * + * @param[in] handle Handle obtained from nvs_open function. + * Handles that were opened read only cannot be used. + * @param[in] key Key name. Maximum length is (NVS_KEY_NAME_MAX_SIZE-1) characters. Shouldn't be empty. + * @param[in] value The value to set. + * + * @return + * - ESP_OK if value was set successfully + * - ESP_FAIL if there is an internal error; most likely due to corrupted + * NVS partition (only if NVS assertion checks are disabled) + * - ESP_ERR_NVS_INVALID_HANDLE if handle has been closed or is NULL + * - ESP_ERR_NVS_READ_ONLY if storage handle was opened as read only + * - ESP_ERR_NVS_INVALID_NAME if key name doesn't satisfy constraints + * - ESP_ERR_NVS_NOT_ENOUGH_SPACE if there is not enough space in the + * underlying storage to save the value + * - ESP_ERR_NVS_REMOVE_FAILED if the value wasn't updated because flash + * write operation has failed. The value was written however, and + * update will be finished after re-initialization of nvs, provided that + * flash operation doesn't fail again. + */ +esp_err_t nvs_set_i8 (nvs_handle_t handle, const char* key, int8_t value); + +/** + * @brief set uint8_t value for given key + * + * This function is the same as \c nvs_set_i8 except for the data type. + */ +esp_err_t nvs_set_u8 (nvs_handle_t handle, const char* key, uint8_t value); + +/** + * @brief set int16_t value for given key + * + * This function is the same as \c nvs_set_i8 except for the data type. + */ +esp_err_t nvs_set_i16 (nvs_handle_t handle, const char* key, int16_t value); + +/** + * @brief set uint16_t value for given key + * + * This function is the same as \c nvs_set_i8 except for the data type. + */ +esp_err_t nvs_set_u16 (nvs_handle_t handle, const char* key, uint16_t value); + +/** + * @brief set int32_t value for given key + * + * This function is the same as \c nvs_set_i8 except for the data type. + */ +esp_err_t nvs_set_i32 (nvs_handle_t handle, const char* key, int32_t value); + +/** + * @brief set uint32_t value for given key + * + * This function is the same as \c nvs_set_i8 except for the data type. + */ +esp_err_t nvs_set_u32 (nvs_handle_t handle, const char* key, uint32_t value); + +/** + * @brief set int64_t value for given key + * + * This function is the same as \c nvs_set_i8 except for the data type. + */ +esp_err_t nvs_set_i64 (nvs_handle_t handle, const char* key, int64_t value); + +/** + * @brief set uint64_t value for given key + * + * This function is the same as \c nvs_set_i8 except for the data type. + */ +esp_err_t nvs_set_u64 (nvs_handle_t handle, const char* key, uint64_t value); + +/** + * @brief set string for given key + * + * Set value for the key, given its name. Note that the actual storage will not be updated + * until \c nvs_commit is called. + * + * @param[in] handle Handle obtained from nvs_open function. + * Handles that were opened read only cannot be used. + * @param[in] key Key name. Maximum length is (NVS_KEY_NAME_MAX_SIZE-1) characters. Shouldn't be empty. + * @param[in] value The value to set. + * For strings, the maximum length (including null character) is + * 4000 bytes, if there is one complete page free for writing. + * This decreases, however, if the free space is fragmented. + * + * @return + * - ESP_OK if value was set successfully + * - ESP_ERR_NVS_INVALID_HANDLE if handle has been closed or is NULL + * - ESP_ERR_NVS_READ_ONLY if storage handle was opened as read only + * - ESP_ERR_NVS_INVALID_NAME if key name doesn't satisfy constraints + * - ESP_ERR_NVS_NOT_ENOUGH_SPACE if there is not enough space in the + * underlying storage to save the value + * - ESP_ERR_NVS_REMOVE_FAILED if the value wasn't updated because flash + * write operation has failed. The value was written however, and + * update will be finished after re-initialization of nvs, provided that + * flash operation doesn't fail again. + * - ESP_ERR_NVS_VALUE_TOO_LONG if the string value is too long + */ +esp_err_t nvs_set_str (nvs_handle_t handle, const char* key, const char* value); +/**@}*/ + +/** + * @brief set variable length binary value for given key + * + * This family of functions set value for the key, given its name. Note that + * actual storage will not be updated until nvs_commit function is called. + * + * @param[in] handle Handle obtained from nvs_open function. + * Handles that were opened read only cannot be used. + * @param[in] key Key name. Maximum length is (NVS_KEY_NAME_MAX_SIZE-1) characters. Shouldn't be empty. + * @param[in] value The value to set. + * @param[in] length length of binary value to set, in bytes; Maximum length is + * 508000 bytes or (97.6% of the partition size - 4000) bytes + * whichever is lower. + * + * @return + * - ESP_OK if value was set successfully + * - ESP_FAIL if there is an internal error; most likely due to corrupted + * NVS partition (only if NVS assertion checks are disabled) + * - ESP_ERR_NVS_INVALID_HANDLE if handle has been closed or is NULL + * - ESP_ERR_NVS_READ_ONLY if storage handle was opened as read only + * - ESP_ERR_NVS_INVALID_NAME if key name doesn't satisfy constraints + * - ESP_ERR_NVS_NOT_ENOUGH_SPACE if there is not enough space in the + * underlying storage to save the value + * - ESP_ERR_NVS_REMOVE_FAILED if the value wasn't updated because flash + * write operation has failed. The value was written however, and + * update will be finished after re-initialization of nvs, provided that + * flash operation doesn't fail again. + * - ESP_ERR_NVS_VALUE_TOO_LONG if the value is too long + */ +esp_err_t nvs_set_blob(nvs_handle_t handle, const char* key, const void* value, size_t length); + +/**@{*/ +/** + * @brief get int8_t value for given key + * + * These functions retrieve value for the key, given its name. If \c key does not + * exist, or the requested variable type doesn't match the type which was used + * when setting a value, an error is returned. + * + * In case of any error, out_value is not modified. + * + * \c out_value has to be a pointer to an already allocated variable of the given type. + * + * \code{c} + * // Example of using nvs_get_i32: + * int32_t max_buffer_size = 4096; // default value + * esp_err_t err = nvs_get_i32(my_handle, "max_buffer_size", &max_buffer_size); + * assert(err == ESP_OK || err == ESP_ERR_NVS_NOT_FOUND); + * // if ESP_ERR_NVS_NOT_FOUND was returned, max_buffer_size will still + * // have its default value. + * + * \endcode + * + * @param[in] handle Handle obtained from nvs_open function. + * @param[in] key Key name. Maximum length is (NVS_KEY_NAME_MAX_SIZE-1) characters. Shouldn't be empty. + * @param out_value Pointer to the output value. + * May be NULL for nvs_get_str and nvs_get_blob, in this + * case required length will be returned in length argument. + * + * @return + * - ESP_OK if the value was retrieved successfully + * - ESP_FAIL if there is an internal error; most likely due to corrupted + * NVS partition (only if NVS assertion checks are disabled) + * - ESP_ERR_NVS_NOT_FOUND if the requested key doesn't exist + * - ESP_ERR_NVS_INVALID_HANDLE if handle has been closed or is NULL + * - ESP_ERR_NVS_INVALID_NAME if key name doesn't satisfy constraints + * - ESP_ERR_NVS_INVALID_LENGTH if length is not sufficient to store data + */ +esp_err_t nvs_get_i8 (nvs_handle_t handle, const char* key, int8_t* out_value); + +/** + * @brief get uint8_t value for given key + * + * This function is the same as \c nvs_get_i8 except for the data type. + */ +esp_err_t nvs_get_u8 (nvs_handle_t handle, const char* key, uint8_t* out_value); + +/** + * @brief get int16_t value for given key + * + * This function is the same as \c nvs_get_i8 except for the data type. + */ +esp_err_t nvs_get_i16 (nvs_handle_t handle, const char* key, int16_t* out_value); + +/** + * @brief get uint16_t value for given key + * + * This function is the same as \c nvs_get_i8 except for the data type. + */ +esp_err_t nvs_get_u16 (nvs_handle_t handle, const char* key, uint16_t* out_value); + +/** + * @brief get int32_t value for given key + * + * This function is the same as \c nvs_get_i8 except for the data type. + */ +esp_err_t nvs_get_i32 (nvs_handle_t handle, const char* key, int32_t* out_value); + +/** + * @brief get uint32_t value for given key + * + * This function is the same as \c nvs_get_i8 except for the data type. + */ +esp_err_t nvs_get_u32 (nvs_handle_t handle, const char* key, uint32_t* out_value); + +/** + * @brief get int64_t value for given key + * + * This function is the same as \c nvs_get_i8 except for the data type. + */ +esp_err_t nvs_get_i64 (nvs_handle_t handle, const char* key, int64_t* out_value); + +/** + * @brief get uint64_t value for given key + * + * This function is the same as \c nvs_get_i8 except for the data type. + */ +esp_err_t nvs_get_u64 (nvs_handle_t handle, const char* key, uint64_t* out_value); +/**@}*/ + +/**@{*/ +/** + * @brief get string value for given key + * + * These functions retrieve the data of an entry, given its key. If key does not + * exist, or the requested variable type doesn't match the type which was used + * when setting a value, an error is returned. + * + * In case of any error, out_value is not modified. + * + * All functions expect out_value to be a pointer to an already allocated variable + * of the given type. + * + * nvs_get_str and nvs_get_blob functions support WinAPI-style length queries. + * To get the size necessary to store the value, call nvs_get_str or nvs_get_blob + * with zero out_value and non-zero pointer to length. Variable pointed to + * by length argument will be set to the required length. For nvs_get_str, + * this length includes the zero terminator. When calling nvs_get_str and + * nvs_get_blob with non-zero out_value, length has to be non-zero and has to + * point to the length available in out_value. + * It is suggested that nvs_get/set_str is used for zero-terminated C strings, and + * nvs_get/set_blob used for arbitrary data structures. + * + * \code{c} + * // Example (without error checking) of using nvs_get_str to get a string into dynamic array: + * size_t required_size; + * nvs_get_str(my_handle, "server_name", NULL, &required_size); + * char* server_name = malloc(required_size); + * nvs_get_str(my_handle, "server_name", server_name, &required_size); + * + * // Example (without error checking) of using nvs_get_blob to get a binary data + * into a static array: + * uint8_t mac_addr[6]; + * size_t size = sizeof(mac_addr); + * nvs_get_blob(my_handle, "dst_mac_addr", mac_addr, &size); + * \endcode + * + * @param[in] handle Handle obtained from nvs_open function. + * @param[in] key Key name. Maximum length is (NVS_KEY_NAME_MAX_SIZE-1) characters. Shouldn't be empty. + * @param[out] out_value Pointer to the output value. + * May be NULL for nvs_get_str and nvs_get_blob, in this + * case required length will be returned in length argument. + * @param[inout] length A non-zero pointer to the variable holding the length of out_value. + * In case out_value a zero, will be set to the length + * required to hold the value. In case out_value is not + * zero, will be set to the actual length of the value + * written. For nvs_get_str this includes zero terminator. + * + * @return + * - ESP_OK if the value was retrieved successfully + * - ESP_FAIL if there is an internal error; most likely due to corrupted + * NVS partition (only if NVS assertion checks are disabled) + * - ESP_ERR_NVS_NOT_FOUND if the requested key doesn't exist + * - ESP_ERR_NVS_INVALID_HANDLE if handle has been closed or is NULL + * - ESP_ERR_NVS_INVALID_NAME if key name doesn't satisfy constraints + * - ESP_ERR_NVS_INVALID_LENGTH if \c length is not sufficient to store data + */ +esp_err_t nvs_get_str (nvs_handle_t handle, const char* key, char* out_value, size_t* length); + +/** + * @brief get blob value for given key + * + * This function behaves the same as \c nvs_get_str, except for the data type. + */ +esp_err_t nvs_get_blob(nvs_handle_t handle, const char* key, void* out_value, size_t* length); +/**@}*/ + +/** + * @brief Erase key-value pair with given key name. + * + * Note that actual storage may not be updated until nvs_commit function is called. + * + * @param[in] handle Storage handle obtained with nvs_open. + * Handles that were opened read only cannot be used. + * + * @param[in] key Key name. Maximum length is (NVS_KEY_NAME_MAX_SIZE-1) characters. Shouldn't be empty. + * + * @return + * - ESP_OK if erase operation was successful + * - ESP_FAIL if there is an internal error; most likely due to corrupted + * NVS partition (only if NVS assertion checks are disabled) + * - ESP_ERR_NVS_INVALID_HANDLE if handle has been closed or is NULL + * - ESP_ERR_NVS_READ_ONLY if handle was opened as read only + * - ESP_ERR_NVS_NOT_FOUND if the requested key doesn't exist + * - other error codes from the underlying storage driver + */ +esp_err_t nvs_erase_key(nvs_handle_t handle, const char* key); + +/** + * @brief Erase all key-value pairs in a namespace + * + * Note that actual storage may not be updated until nvs_commit function is called. + * + * @param[in] handle Storage handle obtained with nvs_open. + * Handles that were opened read only cannot be used. + * + * @return + * - ESP_OK if erase operation was successful + * - ESP_FAIL if there is an internal error; most likely due to corrupted + * NVS partition (only if NVS assertion checks are disabled) + * - ESP_ERR_NVS_INVALID_HANDLE if handle has been closed or is NULL + * - ESP_ERR_NVS_READ_ONLY if handle was opened as read only + * - other error codes from the underlying storage driver + */ +esp_err_t nvs_erase_all(nvs_handle_t handle); + +/** + * @brief Write any pending changes to non-volatile storage + * + * After setting any values, nvs_commit() must be called to ensure changes are written + * to non-volatile storage. Individual implementations may write to storage at other times, + * but this is not guaranteed. + * + * @param[in] handle Storage handle obtained with nvs_open. + * Handles that were opened read only cannot be used. + * + * @return + * - ESP_OK if the changes have been written successfully + * - ESP_ERR_NVS_INVALID_HANDLE if handle has been closed or is NULL + * - other error codes from the underlying storage driver + */ +esp_err_t nvs_commit(nvs_handle_t handle); + +/** + * @brief Close the storage handle and free any allocated resources + * + * This function should be called for each handle opened with nvs_open once + * the handle is not in use any more. Closing the handle may not automatically + * write the changes to nonvolatile storage. This has to be done explicitly using + * nvs_commit function. + * Once this function is called on a handle, the handle should no longer be used. + * + * @param[in] handle Storage handle to close + */ +void nvs_close(nvs_handle_t handle); + +/** + * @note Info about storage space NVS. + */ +typedef struct { + size_t used_entries; /**< Amount of used entries. */ + size_t free_entries; /**< Amount of free entries. */ + size_t total_entries; /**< Amount all available entries. */ + size_t namespace_count; /**< Amount name space. */ +} nvs_stats_t; + +/** + * @brief Fill structure nvs_stats_t. It provides info about used memory the partition. + * + * This function calculates to runtime the number of used entries, free entries, total entries, + * and amount namespace in partition. + * + * \code{c} + * // Example of nvs_get_stats() to get the number of used entries and free entries: + * nvs_stats_t nvs_stats; + * nvs_get_stats(NULL, &nvs_stats); + * printf("Count: UsedEntries = (%d), FreeEntries = (%d), AllEntries = (%d)\n", + nvs_stats.used_entries, nvs_stats.free_entries, nvs_stats.total_entries); + * \endcode + * + * @param[in] part_name Partition name NVS in the partition table. + * If pass a NULL than will use NVS_DEFAULT_PART_NAME ("nvs"). + * + * @param[out] nvs_stats Returns filled structure nvs_states_t. + * It provides info about used memory the partition. + * + * + * @return + * - ESP_OK if the changes have been written successfully. + * Return param nvs_stats will be filled. + * - ESP_ERR_NVS_PART_NOT_FOUND if the partition with label "name" is not found. + * Return param nvs_stats will be filled 0. + * - ESP_ERR_NVS_NOT_INITIALIZED if the storage driver is not initialized. + * Return param nvs_stats will be filled 0. + * - ESP_ERR_INVALID_ARG if nvs_stats equal to NULL. + * - ESP_ERR_INVALID_STATE if there is page with the status of INVALID. + * Return param nvs_stats will be filled not with correct values because + * not all pages will be counted. Counting will be interrupted at the first INVALID page. + */ +esp_err_t nvs_get_stats(const char *part_name, nvs_stats_t *nvs_stats); + +/** + * @brief Calculate all entries in a namespace. + * + * An entry represents the smallest storage unit in NVS. + * Strings and blobs may occupy more than one entry. + * Note that to find out the total number of entries occupied by the namespace, + * add one to the returned value used_entries (if err is equal to ESP_OK). + * Because the name space entry takes one entry. + * + * \code{c} + * // Example of nvs_get_used_entry_count() to get amount of all key-value pairs in one namespace: + * nvs_handle_t handle; + * nvs_open("namespace1", NVS_READWRITE, &handle); + * ... + * size_t used_entries; + * size_t total_entries_namespace; + * if(nvs_get_used_entry_count(handle, &used_entries) == ESP_OK){ + * // the total number of entries occupied by the namespace + * total_entries_namespace = used_entries + 1; + * } + * \endcode + * + * @param[in] handle Handle obtained from nvs_open function. + * + * @param[out] used_entries Returns amount of used entries from a namespace. + * + * + * @return + * - ESP_OK if the changes have been written successfully. + * Return param used_entries will be filled valid value. + * - ESP_ERR_NVS_NOT_INITIALIZED if the storage driver is not initialized. + * Return param used_entries will be filled 0. + * - ESP_ERR_NVS_INVALID_HANDLE if handle has been closed or is NULL. + * Return param used_entries will be filled 0. + * - ESP_ERR_INVALID_ARG if used_entries equal to NULL. + * - Other error codes from the underlying storage driver. + * Return param used_entries will be filled 0. + */ +esp_err_t nvs_get_used_entry_count(nvs_handle_t handle, size_t* used_entries); + +/** + * @brief Create an iterator to enumerate NVS entries based on one or more parameters + * + * \code{c} + * // Example of listing all the key-value pairs of any type under specified partition and namespace + * nvs_iterator_t it = NULL; + * esp_err_t res = nvs_entry_find(, , NVS_TYPE_ANY, &it); + * while(res == ESP_OK) { + * nvs_entry_info_t info; + * nvs_entry_info(it, &info); // Can omit error check if parameters are guaranteed to be non-NULL + * printf("key '%s', type '%d' \n", info.key, info.type); + * res = nvs_entry_next(&it); + * } + * nvs_release_iterator(it); + * \endcode + * + * @param[in] part_name Partition name + * + * @param[in] namespace_name Set this value if looking for entries with + * a specific namespace. Pass NULL otherwise. + * + * @param[in] type One of nvs_type_t values. + * + * @param[out] output_iterator + * Set to a valid iterator to enumerate all the entries found. + * Set to NULL if no entry for specified criteria was found. + * If any other error except ESP_ERR_INVALID_ARG occurs, \c output_iterator is NULL, too. + * If ESP_ERR_INVALID_ARG occurs, \c output_iterator is not changed. + * If a valid iterator is obtained through this function, it has to be released + * using \c nvs_release_iterator when not used any more, unless ESP_ERR_INVALID_ARG is returned. + * + * @return + * - ESP_OK if no internal error or programming error occurred. + * - ESP_ERR_NVS_NOT_FOUND if no element of specified criteria has been found. + * - ESP_ERR_NO_MEM if memory has been exhausted during allocation of internal structures. + * - ESP_ERR_INVALID_ARG if any of the parameters is NULL. + * Note: don't release \c output_iterator in case ESP_ERR_INVALID_ARG has been returned + */ +esp_err_t nvs_entry_find(const char *part_name, + const char *namespace_name, + nvs_type_t type, + nvs_iterator_t *output_iterator); + +/** + * @brief Advances the iterator to next item matching the iterator criteria. + * + * Note that any copies of the iterator will be invalid after this call. + * + * @param[inout] iterator Iterator obtained from nvs_entry_find function. Must be non-NULL. + * If any error except ESP_ERR_INVALID_ARG occurs, \c iterator is set to NULL. + * If ESP_ERR_INVALID_ARG occurs, \c iterator is not changed. + * + * @return + * - ESP_OK if no internal error or programming error occurred. + * - ESP_ERR_NVS_NOT_FOUND if no next element matching the iterator criteria. + * - ESP_ERR_INVALID_ARG if \c iterator is NULL. + * - Possibly other errors in the future for internal programming or flash errors. + */ +esp_err_t nvs_entry_next(nvs_iterator_t *iterator); + +/** + * @brief Fills nvs_entry_info_t structure with information about entry pointed to by the iterator. + * + * @param[in] iterator Iterator obtained from nvs_entry_find function. Must be non-NULL. + * + * @param[out] out_info Structure to which entry information is copied. + * + * @return + * - ESP_OK if all parameters are valid; current iterator data has been written to out_info + * - ESP_ERR_INVALID_ARG if one of the parameters is NULL. + */ +esp_err_t nvs_entry_info(const nvs_iterator_t iterator, nvs_entry_info_t *out_info); + +/** + * @brief Release iterator + * + * @param[in] iterator Release iterator obtained from nvs_entry_find function. NULL argument is allowed. + * + */ +void nvs_release_iterator(nvs_iterator_t iterator); + + +#ifdef __cplusplus +} // extern "C" +#endif + +#endif //ESP_NVS_H diff --git a/espradio/blobs/headers/phy.h b/espradio/blobs/headers/phy.h new file mode 100644 index 000000000..19fbf7a6d --- /dev/null +++ b/espradio/blobs/headers/phy.h @@ -0,0 +1,179 @@ +/* + * SPDX-FileCopyrightText: 2015-2023 Espressif Systems (Shanghai) CO LTD + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#pragma once +#include "esp_phy_init.h" + +#ifdef __cplusplus +extern "C" { +#endif + +#define ESP_CAL_DATA_CHECK_FAIL 1 + +typedef enum { + PHY_I2C_MST_CMD_TYPE_OFF = 0, + PHY_I2C_MST_CMD_TYPE_ON, + PHY_I2C_MST_CMD_TYPE_MAX +} phy_i2c_master_command_type_t; + +typedef struct { + struct { + uint8_t start, end; /* the start and end index of phy i2c master command memory */ + uint8_t host_id; /* phy i2c master host id */ + } config[PHY_I2C_MST_CMD_TYPE_MAX]; +} phy_i2c_master_command_attribute_t; + +/** + * @file phy.h + * @brief Declarations for functions provided by libphy.a + */ + +/** + * @brief Return ROM function pointer table from PHY library. + */ +void phy_get_romfunc_addr(void); + +/** + * @brief Initialize PHY module and do RF calibration + * @param[in] init_data Initialization parameters to be used by the PHY + * @param[inout] cal_data As input, calibration data previously obtained. As output, will contain new calibration data. + * @param[in] cal_mode RF calibration mode + * @return ESP_CAL_DATA_CHECK_FAIL if calibration data checksum fails, other values are reserved for future use + */ +int register_chipv7_phy(const esp_phy_init_data_t* init_data, esp_phy_calibration_data_t *cal_data, esp_phy_calibration_mode_t cal_mode); + +/** + * @brief Get the format version of calibration data used by PHY library. + * @return Format version number, OR'ed with BIT(16) if PHY is in WIFI only mode. + */ +uint32_t phy_get_rf_cal_version(void); + +/** + * @brief Set RF/BB for only WIFI mode or coexist(WIFI & BT) mode + * @param[in] true is for only WIFI mode, false is for coexist mode. default is 0. + * @return NULL + */ +void phy_set_wifi_mode_only(bool wifi_only); + +/** + * @brief Set BT the highest priority in coexist mode. + * @return NULL + */ +void coex_bt_high_prio(void); + +/** + * @brief Open PHY and RF. + */ +void phy_wakeup_init(void); + +/** + * @brief Shutdown PHY and RF. + */ +void phy_close_rf(void); + +#if !CONFIG_IDF_TARGET_ESP32 +/** + * @brief Disable PHY temperature sensor. + */ +void phy_xpd_tsens(void); +#endif + +#if CONFIG_IDF_TARGET_ESP32C3 +/** + * @brief Update internal state of PHY when wifi deinit powers off the wifi power domain. + */ +void phy_init_flag(void); +#endif + +#if CONFIG_IDF_TARGET_ESP32C6 +/** + * @brief Get the configuration info of PHY i2c master command memory. + * + * @param attr the configuration info of PHY i2c master command memory + */ +void phy_i2c_master_mem_cfg(phy_i2c_master_command_attribute_t *attr); +#endif + +/** + * @brief Store and load PHY digital registers. + * + * @param backup_en if backup_en is true, store PHY digital registers to memory. Otherwise load PHY digital registers from memory + * @param mem_addr Memory address to store and load PHY digital registers + * + * @return memory size + */ +uint8_t phy_dig_reg_backup(bool backup_en, uint32_t *mem_addr); + +#if CONFIG_MAC_BB_PD +/** + * @brief Store and load baseband registers. + */ +void phy_freq_mem_backup(bool backup_en, uint32_t *mem); +#endif + +#if CONFIG_ESP_PHY_ENABLE_USB +/** + * @brief Enable or disable USB when phy init. + */ +void phy_bbpll_en_usb(bool en); +#endif + +#if CONFIG_IDF_TARGET_ESP32S2 +/** + * @brief Phy version select for ESP32S2 + */ +void phy_eco_version_sel(uint8_t chip_ver); +#endif + +#if CONFIG_ESP_PHY_IMPROVE_RX_11B +/** + * @brief Improve Wi-Fi receive 11b pkts when modules with high interference. + * + * @attention 1.This is a workaround to improve Wi-Fi receive 11b pkts for some modules using AC-DC power supply with high interference. + * @attention 2.Enable this will sacrifice Wi-Fi OFDM receive performance. But to guarantee 11b receive performance serves as a bottom line in this case. + * + * @param enable Enable or disable. + */ +void phy_improve_rx_special(bool enable); +#endif + +/** + * @brief Enable phy track pll + * + */ +void phy_track_pll_init(void); + +/** + * @brief Disable phy track pll + * + */ +void phy_track_pll_deinit(void); + +/** + * @brief Set the flag recorded which modem has already enabled phy + * + */ +void phy_set_modem_flag(esp_phy_modem_t modem); + +/** + * @brief Clear the flag to record which modem calls phy disenable + */ +void phy_clr_modem_flag(esp_phy_modem_t modem); + +/** + * @brief Get the flag recorded which modem has already enabled phy + * + */ +esp_phy_modem_t phy_get_modem_flag(void); + +/** + * @brief Get the PHY lock, only used in esp_phy, the user should not use this function. + * + */ +_lock_t phy_get_lock(void); +#ifdef __cplusplus +} +#endif diff --git a/espradio/blobs/include/esp_assert.h b/espradio/blobs/include/esp_assert.h new file mode 100644 index 000000000..f68c702e3 --- /dev/null +++ b/espradio/blobs/include/esp_assert.h @@ -0,0 +1,32 @@ +/* + * SPDX-FileCopyrightText: 2015-2022 Espressif Systems (Shanghai) CO LTD + * + * SPDX-License-Identifier: Apache-2.0 + */ +#ifndef __ESP_ASSERT_H__ +#define __ESP_ASSERT_H__ + +#include "assert.h" + +/* Since IDF v5.0, C17 standard is used, which supports both _Static_assert and static_assert syntax */ +#define ESP_STATIC_ASSERT static_assert + +/* Assert at compile time if possible, runtime otherwise */ +#ifndef __cplusplus +/* __builtin_choose_expr() is only in C, makes this a lot cleaner */ +#define TRY_STATIC_ASSERT(CONDITION, MSG) do { \ + ESP_STATIC_ASSERT(__builtin_choose_expr(__builtin_constant_p(CONDITION), (CONDITION), 1), #MSG); \ + assert(#MSG && (CONDITION)); \ + } while(0) +#else +/* for C++, use __attribute__((error)) - works almost as well as ESP_STATIC_ASSERT */ +#define TRY_STATIC_ASSERT(CONDITION, MSG) do { \ + if (__builtin_constant_p(CONDITION) && !(CONDITION)) { \ + extern __attribute__((error(#MSG))) void failed_compile_time_assert(void); \ + failed_compile_time_assert(); \ + } \ + assert(#MSG && (CONDITION)); \ + } while(0) +#endif /* __cplusplus */ + +#endif /* __ESP_ASSERT_H__ */ diff --git a/espradio/blobs/include/esp_bt_cfg.h b/espradio/blobs/include/esp_bt_cfg.h new file mode 100644 index 000000000..8b1a39374 --- /dev/null +++ b/espradio/blobs/include/esp_bt_cfg.h @@ -0,0 +1 @@ +// empty diff --git a/espradio/blobs/include/esp_etm.h b/espradio/blobs/include/esp_etm.h new file mode 100644 index 000000000..c0757abf8 --- /dev/null +++ b/espradio/blobs/include/esp_etm.h @@ -0,0 +1,147 @@ +/* + * SPDX-FileCopyrightText: 2022 Espressif Systems (Shanghai) CO LTD + * + * SPDX-License-Identifier: Apache-2.0 + */ +#pragma once + +#include +#include +#include "esp_err.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * @brief ETM channel handle + */ +typedef struct esp_etm_channel_t *esp_etm_channel_handle_t; + +/** + * @brief ETM event handle + */ +typedef struct esp_etm_event_t *esp_etm_event_handle_t; + +/** + * @brief ETM task handle + */ +typedef struct esp_etm_task_t *esp_etm_task_handle_t; + +/** + * @brief ETM channel configuration + */ +typedef struct { + +} esp_etm_channel_config_t; + +/** + * @brief Allocate an ETM channel + * + * @note The channel can later be freed by `esp_etm_del_channel` + * + * @param[in] config ETM channel configuration + * @param[out] ret_chan Returned ETM channel handle + * @return + * - ESP_OK: Allocate ETM channel successfully + * - ESP_ERR_INVALID_ARG: Allocate ETM channel failed because of invalid argument + * - ESP_ERR_NO_MEM: Allocate ETM channel failed because of out of memory + * - ESP_ERR_NOT_FOUND: Allocate ETM channel failed because all channels are used up and no more free one + * - ESP_FAIL: Allocate ETM channel failed because of other reasons + */ +esp_err_t esp_etm_new_channel(const esp_etm_channel_config_t *config, esp_etm_channel_handle_t *ret_chan); + +/** + * @brief Delete an ETM channel + * + * @param[in] chan ETM channel handle that created by `esp_etm_new_channel` + * @return + * - ESP_OK: Delete ETM channel successfully + * - ESP_ERR_INVALID_ARG: Delete ETM channel failed because of invalid argument + * - ESP_FAIL: Delete ETM channel failed because of other reasons + */ +esp_err_t esp_etm_del_channel(esp_etm_channel_handle_t chan); + +/** + * @brief Enable ETM channel + * + * @note This function will transit the channel state from init to enable. + * + * @param[in] chan ETM channel handle that created by `esp_etm_new_channel` + * @return + * - ESP_OK: Enable ETM channel successfully + * - ESP_ERR_INVALID_ARG: Enable ETM channel failed because of invalid argument + * - ESP_ERR_INVALID_STATE: Enable ETM channel failed because the channel has been enabled already + * - ESP_FAIL: Enable ETM channel failed because of other reasons + */ +esp_err_t esp_etm_channel_enable(esp_etm_channel_handle_t chan); + +/** + * @brief Disable ETM channel + * + * @note This function will transit the channel state from enable to init. + * + * @param[in] chan ETM channel handle that created by `esp_etm_new_channel` + * @return + * - ESP_OK: Disable ETM channel successfully + * - ESP_ERR_INVALID_ARG: Disable ETM channel failed because of invalid argument + * - ESP_ERR_INVALID_STATE: Disable ETM channel failed because the channel is not enabled yet + * - ESP_FAIL: Disable ETM channel failed because of other reasons + */ +esp_err_t esp_etm_channel_disable(esp_etm_channel_handle_t chan); + +/** + * @brief Connect an ETM event to an ETM task via a previously allocated ETM channel + * + * @note Setting the ETM event/task handle to NULL means to disconnect the channel from any event/task + * + * @param[in] chan ETM channel handle that created by `esp_etm_new_channel` + * @param[in] event ETM event handle obtained from a driver/peripheral, e.g. `xxx_new_etm_event` + * @param[in] task ETM task handle obtained from a driver/peripheral, e.g. `xxx_new_etm_task` + * @return + * - ESP_OK: Connect ETM event and task to the channel successfully + * - ESP_ERR_INVALID_ARG: Connect ETM event and task to the channel failed because of invalid argument + * - ESP_FAIL: Connect ETM event and task to the channel failed because of other reasons + */ +esp_err_t esp_etm_channel_connect(esp_etm_channel_handle_t chan, esp_etm_event_handle_t event, esp_etm_task_handle_t task); + +/** + * @brief Delete ETM event + * + * @note Although the ETM event comes from various peripherals, we provide the same user API to delete the event handle seamlessly. + * + * @param[in] event ETM event handle obtained from a driver/peripheral, e.g. `xxx_new_etm_event` + * @return + * - ESP_OK: Delete ETM event successfully + * - ESP_ERR_INVALID_ARG: Delete ETM event failed because of invalid argument + * - ESP_FAIL: Delete ETM event failed because of other reasons + */ +esp_err_t esp_etm_del_event(esp_etm_event_handle_t event); + +/** + * @brief Delete ETM task + * + * @note Although the ETM task comes from various peripherals, we provide the same user API to delete the task handle seamlessly. + * + * @param[in] task ETM task handle obtained from a driver/peripheral, e.g. `xxx_new_etm_task` + * @return + * - ESP_OK: Delete ETM task successfully + * - ESP_ERR_INVALID_ARG: Delete ETM task failed because of invalid argument + * - ESP_FAIL: Delete ETM task failed because of other reasons + */ +esp_err_t esp_etm_del_task(esp_etm_task_handle_t task); + +/** + * @brief Dump ETM channel usages to the given IO stream + * + * @param[in] out_stream IO stream (e.g. stdout) + * @return + * - ESP_OK: Dump ETM channel usages successfully + * - ESP_ERR_INVALID_ARG: Dump ETM channel usages failed because of invalid argument + * - ESP_FAIL: Dump ETM channel usages failed because of other reasons + */ +esp_err_t esp_etm_dump(FILE *out_stream); + +#ifdef __cplusplus +} +#endif diff --git a/espradio/blobs/include/esp_netif.h b/espradio/blobs/include/esp_netif.h new file mode 100644 index 000000000..8b1a39374 --- /dev/null +++ b/espradio/blobs/include/esp_netif.h @@ -0,0 +1 @@ +// empty diff --git a/espradio/blobs/include/esp_now.h b/espradio/blobs/include/esp_now.h new file mode 100644 index 000000000..3e8e8e299 --- /dev/null +++ b/espradio/blobs/include/esp_now.h @@ -0,0 +1,380 @@ +/* + * SPDX-FileCopyrightText: 2019-2022 Espressif Systems (Shanghai) CO LTD + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#ifndef __ESP_NOW_H__ +#define __ESP_NOW_H__ + +#include +#include "esp_err.h" +#include "esp_wifi_types.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/** \defgroup WiFi_APIs WiFi Related APIs + * @brief WiFi APIs + */ + +/** @addtogroup WiFi_APIs + * @{ + */ + +/** \defgroup ESPNOW_APIs ESPNOW APIs + * @brief ESP32 ESPNOW APIs + * + */ + +/** @addtogroup ESPNOW_APIs + * @{ + */ + +#define ESP_ERR_ESPNOW_BASE (ESP_ERR_WIFI_BASE + 100) /*!< ESPNOW error number base. */ +#define ESP_ERR_ESPNOW_NOT_INIT (ESP_ERR_ESPNOW_BASE + 1) /*!< ESPNOW is not initialized. */ +#define ESP_ERR_ESPNOW_ARG (ESP_ERR_ESPNOW_BASE + 2) /*!< Invalid argument */ +#define ESP_ERR_ESPNOW_NO_MEM (ESP_ERR_ESPNOW_BASE + 3) /*!< Out of memory */ +#define ESP_ERR_ESPNOW_FULL (ESP_ERR_ESPNOW_BASE + 4) /*!< ESPNOW peer list is full */ +#define ESP_ERR_ESPNOW_NOT_FOUND (ESP_ERR_ESPNOW_BASE + 5) /*!< ESPNOW peer is not found */ +#define ESP_ERR_ESPNOW_INTERNAL (ESP_ERR_ESPNOW_BASE + 6) /*!< Internal error */ +#define ESP_ERR_ESPNOW_EXIST (ESP_ERR_ESPNOW_BASE + 7) /*!< ESPNOW peer has existed */ +#define ESP_ERR_ESPNOW_IF (ESP_ERR_ESPNOW_BASE + 8) /*!< Interface error */ + +#define ESP_NOW_ETH_ALEN 6 /*!< Length of ESPNOW peer MAC address */ +#define ESP_NOW_KEY_LEN 16 /*!< Length of ESPNOW peer local master key */ + +#define ESP_NOW_MAX_TOTAL_PEER_NUM 20 /*!< Maximum number of ESPNOW total peers */ +#define ESP_NOW_MAX_ENCRYPT_PEER_NUM 6 /*!< Maximum number of ESPNOW encrypted peers */ + +#define ESP_NOW_MAX_DATA_LEN 250 /*!< Maximum length of ESPNOW data which is sent very time */ + +/** + * @brief Status of sending ESPNOW data . + */ +typedef enum { + ESP_NOW_SEND_SUCCESS = 0, /**< Send ESPNOW data successfully */ + ESP_NOW_SEND_FAIL, /**< Send ESPNOW data fail */ +} esp_now_send_status_t; + +/** + * @brief ESPNOW peer information parameters. + */ +typedef struct esp_now_peer_info { + uint8_t peer_addr[ESP_NOW_ETH_ALEN]; /**< ESPNOW peer MAC address that is also the MAC address of station or softap */ + uint8_t lmk[ESP_NOW_KEY_LEN]; /**< ESPNOW peer local master key that is used to encrypt data */ + uint8_t channel; /**< Wi-Fi channel that peer uses to send/receive ESPNOW data. If the value is 0, + use the current channel which station or softap is on. Otherwise, it must be + set as the channel that station or softap is on. */ + wifi_interface_t ifidx; /**< Wi-Fi interface that peer uses to send/receive ESPNOW data */ + bool encrypt; /**< ESPNOW data that this peer sends/receives is encrypted or not */ + void *priv; /**< ESPNOW peer private data */ +} esp_now_peer_info_t; + +/** + * @brief Number of ESPNOW peers which exist currently. + */ +typedef struct esp_now_peer_num { + int total_num; /**< Total number of ESPNOW peers, maximum value is ESP_NOW_MAX_TOTAL_PEER_NUM */ + int encrypt_num; /**< Number of encrypted ESPNOW peers, maximum value is ESP_NOW_MAX_ENCRYPT_PEER_NUM */ +} esp_now_peer_num_t; + +/** + * @brief ESPNOW packet information + */ +typedef struct esp_now_recv_info { + uint8_t * src_addr; /**< Source address of ESPNOW packet */ + uint8_t * des_addr; /**< Destination address of ESPNOW packet */ + wifi_pkt_rx_ctrl_t * rx_ctrl; /**< Rx control info of ESPNOW packet */ +} esp_now_recv_info_t; + +/** + * @brief ESPNOW rate config + * + */ +typedef struct esp_now_rate_config { + wifi_phy_mode_t phymode; /**< ESPNOW phymode of specified interface */ + wifi_phy_rate_t rate; /**< ESPNOW rate of specified interface*/ + bool ersu; /**< ESPNOW using ersu send frame*/ + bool dcm; /**< ESPNOW using dcm rate to send frame*/ +} esp_now_rate_config_t; + +/** + * @brief Callback function of receiving ESPNOW data + * @param esp_now_info received ESPNOW packet information + * @param data received data + * @param data_len length of received data + * @attention esp_now_info is a local variable，it can only be used in the callback. + */ +typedef void (*esp_now_recv_cb_t)(const esp_now_recv_info_t * esp_now_info, const uint8_t *data, int data_len); + +/** + * @brief Callback function of sending ESPNOW data + * @param mac_addr peer MAC address + * @param status status of sending ESPNOW data (succeed or fail) + */ +typedef void (*esp_now_send_cb_t)(const uint8_t *mac_addr, esp_now_send_status_t status); + +/** + * @brief Initialize ESPNOW function + * + * @return + * - ESP_OK : succeed + * - ESP_ERR_ESPNOW_INTERNAL : Internal error + */ +esp_err_t esp_now_init(void); + +/** + * @brief De-initialize ESPNOW function + * + * @return + * - ESP_OK : succeed + */ +esp_err_t esp_now_deinit(void); + +/** + * @brief Get the version of ESPNOW + * + * @param version ESPNOW version + * + * @return + * - ESP_OK : succeed + * - ESP_ERR_ESPNOW_ARG : invalid argument + */ +esp_err_t esp_now_get_version(uint32_t *version); + +/** + * @brief Register callback function of receiving ESPNOW data + * + * @param cb callback function of receiving ESPNOW data + * + * @return + * - ESP_OK : succeed + * - ESP_ERR_ESPNOW_NOT_INIT : ESPNOW is not initialized + * - ESP_ERR_ESPNOW_INTERNAL : internal error + */ +esp_err_t esp_now_register_recv_cb(esp_now_recv_cb_t cb); + +/** + * @brief Unregister callback function of receiving ESPNOW data + * + * @return + * - ESP_OK : succeed + * - ESP_ERR_ESPNOW_NOT_INIT : ESPNOW is not initialized + */ +esp_err_t esp_now_unregister_recv_cb(void); + +/** + * @brief Register callback function of sending ESPNOW data + * + * @param cb callback function of sending ESPNOW data + * + * @return + * - ESP_OK : succeed + * - ESP_ERR_ESPNOW_NOT_INIT : ESPNOW is not initialized + * - ESP_ERR_ESPNOW_INTERNAL : internal error + */ +esp_err_t esp_now_register_send_cb(esp_now_send_cb_t cb); + +/** + * @brief Unregister callback function of sending ESPNOW data + * + * @return + * - ESP_OK : succeed + * - ESP_ERR_ESPNOW_NOT_INIT : ESPNOW is not initialized + */ +esp_err_t esp_now_unregister_send_cb(void); + +/** + * @brief Send ESPNOW data + * + * @attention 1. If peer_addr is not NULL, send data to the peer whose MAC address matches peer_addr + * @attention 2. If peer_addr is NULL, send data to all of the peers that are added to the peer list + * @attention 3. The maximum length of data must be less than ESP_NOW_MAX_DATA_LEN + * @attention 4. The buffer pointed to by data argument does not need to be valid after esp_now_send returns + * + * @param peer_addr peer MAC address + * @param data data to send + * @param len length of data + * + * @return + * - ESP_OK : succeed + * - ESP_ERR_ESPNOW_NOT_INIT : ESPNOW is not initialized + * - ESP_ERR_ESPNOW_ARG : invalid argument + * - ESP_ERR_ESPNOW_INTERNAL : internal error + * - ESP_ERR_ESPNOW_NO_MEM : out of memory, when this happens, you can delay a while before sending the next data + * - ESP_ERR_ESPNOW_NOT_FOUND : peer is not found + * - ESP_ERR_ESPNOW_IF : current WiFi interface doesn't match that of peer + */ +esp_err_t esp_now_send(const uint8_t *peer_addr, const uint8_t *data, size_t len); + +/** + * @brief Add a peer to peer list + * + * @param peer peer information + * + * @return + * - ESP_OK : succeed + * - ESP_ERR_ESPNOW_NOT_INIT : ESPNOW is not initialized + * - ESP_ERR_ESPNOW_ARG : invalid argument + * - ESP_ERR_ESPNOW_FULL : peer list is full + * - ESP_ERR_ESPNOW_NO_MEM : out of memory + * - ESP_ERR_ESPNOW_EXIST : peer has existed + */ +esp_err_t esp_now_add_peer(const esp_now_peer_info_t *peer); + +/** + * @brief Delete a peer from peer list + * + * @param peer_addr peer MAC address + * + * @return + * - ESP_OK : succeed + * - ESP_ERR_ESPNOW_NOT_INIT : ESPNOW is not initialized + * - ESP_ERR_ESPNOW_ARG : invalid argument + * - ESP_ERR_ESPNOW_NOT_FOUND : peer is not found + */ +esp_err_t esp_now_del_peer(const uint8_t *peer_addr); + +/** + * @brief Modify a peer + * + * @param peer peer information + * + * @return + * - ESP_OK : succeed + * - ESP_ERR_ESPNOW_NOT_INIT : ESPNOW is not initialized + * - ESP_ERR_ESPNOW_ARG : invalid argument + * - ESP_ERR_ESPNOW_FULL : peer list is full + */ +esp_err_t esp_now_mod_peer(const esp_now_peer_info_t *peer); + +/** + * @brief Config ESPNOW rate of specified interface + * + * @deprecated please use esp_now_set_peer_rate_config() instead. + * + * @attention 1. This API should be called after esp_wifi_start(). + * @attention 2. This API only work when not use Wi-Fi 6 and esp_now_set_peer_rate_config() not called. + * + * @param ifx Interface to be configured. + * @param rate Phy rate to be configured. + * + * @return + * - ESP_OK: succeed + * - others: failed + */ +esp_err_t esp_wifi_config_espnow_rate(wifi_interface_t ifx, wifi_phy_rate_t rate) + __attribute__((deprecated("This API can be only used when rate is non-HE rate, \ + please use esp_now_set_peer_rate_config if you want full support of the rate."))); + +/** + * @brief Set ESPNOW rate config for each peer + * + * @attention 1. This API should be called after esp_wifi_start() and esp_now_init(). + * + * @param peer_addr peer MAC address + * @param config rate config to be configured. + * + * @return + * - ESP_OK : succeed + * - ESP_ERR_ESPNOW_NOT_INIT : ESPNOW is not initialized + * - ESP_ERR_ESPNOW_ARG : invalid argument + * - ESP_ERR_ESPNOW_INTERNAL : internal error + */ +esp_err_t esp_now_set_peer_rate_config(const uint8_t *peer_addr, esp_now_rate_config_t *config); + +/** + * @brief Get a peer whose MAC address matches peer_addr from peer list + * + * @param peer_addr peer MAC address + * @param peer peer information + * + * @return + * - ESP_OK : succeed + * - ESP_ERR_ESPNOW_NOT_INIT : ESPNOW is not initialized + * - ESP_ERR_ESPNOW_ARG : invalid argument + * - ESP_ERR_ESPNOW_NOT_FOUND : peer is not found + */ +esp_err_t esp_now_get_peer(const uint8_t *peer_addr, esp_now_peer_info_t *peer); + +/** + * @brief Fetch a peer from peer list. Only return the peer which address is unicast, for the multicast/broadcast address, the function will ignore and try to find the next in the peer list. + * + * @param from_head fetch from head of list or not + * @param peer peer information + * + * @return + * - ESP_OK : succeed + * - ESP_ERR_ESPNOW_NOT_INIT : ESPNOW is not initialized + * - ESP_ERR_ESPNOW_ARG : invalid argument + * - ESP_ERR_ESPNOW_NOT_FOUND : peer is not found + */ +esp_err_t esp_now_fetch_peer(bool from_head, esp_now_peer_info_t *peer); + +/** + * @brief Peer exists or not + * + * @param peer_addr peer MAC address + * + * @return + * - true : peer exists + * - false : peer not exists + */ +bool esp_now_is_peer_exist(const uint8_t *peer_addr); + +/** + * @brief Get the number of peers + * + * @param num number of peers + * + * @return + * - ESP_OK : succeed + * - ESP_ERR_ESPNOW_NOT_INIT : ESPNOW is not initialized + * - ESP_ERR_ESPNOW_ARG : invalid argument + */ +esp_err_t esp_now_get_peer_num(esp_now_peer_num_t *num); + +/** + * @brief Set the primary master key + * + * @param pmk primary master key + * + * @attention 1. primary master key is used to encrypt local master key + * + * @return + * - ESP_OK : succeed + * - ESP_ERR_ESPNOW_NOT_INIT : ESPNOW is not initialized + * - ESP_ERR_ESPNOW_ARG : invalid argument + */ +esp_err_t esp_now_set_pmk(const uint8_t *pmk); + +/** + * @brief Set wake window for esp_now to wake up in interval unit + * + * @param window Milliseconds would the chip keep waked each interval, from 0 to 65535. + * + * @attention 1. This configuration could work at connected status. + * When ESP_WIFI_STA_DISCONNECTED_PM_ENABLE is enabled, this configuration could work at disconnected status. + * @attention 2. Default value is the maximum. + * + * @return + * - ESP_OK : succeed + * - ESP_ERR_ESPNOW_NOT_INIT : ESPNOW is not initialized + */ +esp_err_t esp_now_set_wake_window(uint16_t window); + +/** + * @} + */ + +/** + * @} + */ + +#ifdef __cplusplus +} +#endif + +#endif /* __ESP_NOW_H__ */ diff --git a/espradio/blobs/include/esp_task.h b/espradio/blobs/include/esp_task.h new file mode 100644 index 000000000..8b1a39374 --- /dev/null +++ b/espradio/blobs/include/esp_task.h @@ -0,0 +1 @@ +// empty diff --git a/espradio/blobs/include/esp_wifi_he.h b/espradio/blobs/include/esp_wifi_he.h new file mode 100644 index 000000000..de270292e --- /dev/null +++ b/espradio/blobs/include/esp_wifi_he.h @@ -0,0 +1,155 @@ +/* + * SPDX-FileCopyrightText: 2022 Espressif Systems (Shanghai) CO LTD + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#pragma once + +#include +#include +#include "esp_err.h" +#include "esp_wifi_he_types.h" + +#ifdef __cplusplus +extern "C" { +#endif + + +/** + * @brief Set up an individual TWT agreement (NegotiationType=0) or change TWT parameters of the existing TWT agreement + * - TWT Wake Interval = TWT Wake Interval Mantissa * (2 ^ TWT Wake Interval Exponent), unit: us + * - e.g. TWT Wake Interval Mantissa = 512, TWT Wake Interval Exponent = 12, then TWT Wake Interval is 2097.152 ms + * Nominal Minimum Wake Duration = 255, then TWT Wake Duration is 65.28 ms + * + * @attention Support at most 4 TWT agreements, otherwise ESP_ERR_WIFI_TWT_FULL will be returned. + * Support sleep time up to (1 << 35) us. + * + * @param[in] setup_cmd Indicates the type of TWT command + * @param[in] trigger true: a trigger-enabled TWT, false: a non-trigger-enabled TWT + * @param[in] flow_type 0: an announced TWT, 1: an unannounced TWT + * @param[in] min_wake_dura Nominal Minimum Wake Duration, indicates the minimum amount of time, in unit of 256 us, that the TWT requesting STA expects that it needs to be awake. The value range is [1, 255]. + * @param[in] wake_invl_expn TWT Wake Interval Exponent. The value range is [0, 31]. + * @param[in] wake_invl_mant TWT Wake Interval Mantissa. The value range is [1, 65535]. + * @param[in/out] flow_id When set up an individual TWT agreement, the flow id will be assigned by AP after a successful agreement setup. + * flow_id is allowed to be NULL. flow_id could be specified to a value in the range of [0, 7], but it might be changed by AP in the response. + * When change TWT parameters of the existing TWT agreement, flow_id should be an existing one. The value range is [0, 7]. + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + * - ESP_ERR_WIFI_NOT_STARTED: WiFi is not started by esp_wifi_start + * - ESP_ERR_WIFI_CONN: WiFi internal error, station or soft-AP control block wrong + * - ESP_ERR_WIFI_NOT_CONNECT: The station is in disconnect status + * - ESP_ERR_WIFI_TWT_FULL: no available flow id + * - ESP_ERR_INVALID_ARG: invalid argument + */ +esp_err_t esp_wifi_sta_itwt_setup(wifi_twt_setup_cmds_t setup_cmd, bool trigger, int flow_type, int min_wake_dura, int wake_invl_expn, int wake_invl_mant, int *flow_id); + +/** + * @brief Tear down individual TWT agreements + * + * @param[in] flow_id The value range is [0, 8]. 8 indicates tear down all individual TWT agreements. + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + * - ESP_ERR_WIFI_NOT_STARTED: WiFi is not started by esp_wifi_start + * - ESP_ERR_WIFI_CONN: WiFi internal error, station or soft-AP control block wrong + * - ESP_ERR_WIFI_NOT_CONNECT: The station is in disconnect status + * - ESP_ERR_INVALID_ARG: invalid argument + */ +esp_err_t esp_wifi_sta_itwt_teardown(int flow_id); + +/** + * @brief Send a TWT Information frame to AP for suspending/resuming established iTWT agreements. + * + * @param[in] flow_id The value range is [0, 8]. 8 indicates suspend all individual TWT agreements + * @param[in] suspend_time_ms If the value is 0, indicates the specified flow_id or all established agreements will be suspended until resume by users. + * If the value is greater than 0, indicates the specified flow_id or all established agreements will be suspended until suspend_time_ms timeout, unit: ms. + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + * - ESP_ERR_WIFI_NOT_STARTED: WiFi is not started by esp_wifi_start + * - ESP_ERR_WIFI_CONN: WiFi internal error, station or soft-AP control block wrong + * - ESP_ERR_WIFI_NOT_ASSOC: WiFi is not associated + * - ESP_ERR_INVALID_ARG: invalid argument + */ +esp_err_t esp_wifi_sta_itwt_suspend(int flow_id, int suspend_time_ms); + +/** + * @brief Get flow id status + * + * @param[in] flow_id_bitmap Flow id status bitmap with 8 bit. Each bit represents that whether the corresponding flow id is setup. + * 1: setup, 0: not setup. + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + * - ESP_ERR_WIFI_NOT_STARTED: WiFi is not started by esp_wifi_start + * - ESP_ERR_WIFI_CONN: WiFi internal error, station or soft-AP control block wrong + * - ESP_ERR_WIFI_NOT_CONNECT: The station is in disconnect status + * - ESP_ERR_INVALID_ARG: invalid argument + */ +esp_err_t esp_wifi_sta_itwt_get_flow_id_status(int *flow_id_bitmap); + +/** + * @brief Send probe to update TSF time + * + * @attention In bad network, timeout_ms is variable with the network + * + * @param[in] timeout_ms The estimated time includes sending probe request and receiving probe response, unit: ms. + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + * - ESP_ERR_WIFI_NOT_STARTED: WiFi is not started by esp_wifi_start + * - ESP_ERR_WIFI_CONN: WiFi internal error, station or soft-AP control block wrong + * - ESP_ERR_WIFI_NOT_ASSOC: WiFi is not associated + */ +esp_err_t esp_wifi_sta_itwt_send_probe_req(int timeout_ms); + +/** + * @brief Set time offset with TBTT of target wake time field in itwt setup request frame. + * + * @param[in] offset_us Offset with TBTT of target wake time field in itwt setup request frame, range is [0, 102400], unit microseconds. + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_WIFI_NOT_INIT: WiFi is not initialized by esp_wifi_init + * - ESP_ERR_WIFI_NOT_STARTED: WiFi is not started by esp_wifi_start + * - ESP_ERR_WIFI_CONN: WiFi internal error, station or soft-AP control block wrong + * - ESP_ERR_WIFI_NOT_ASSOC: WiFi is not associated + * - ESP_ERR_INVALID_ARG: invalid argument + */ +esp_err_t esp_wifi_sta_itwt_set_target_wake_time_offset(int offset_us); + +/** + * @brief Enable the reception statistics. + * + * @param[in] rx_stats indicate whether enable the reception statistics for HT, HE SU, HE ER SU and legacy + * @param[in] rx_mu_stats indicate whether enable the reception statistics for DL MU-MIMO and DL OFDMA + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_NO_MEM: out of memory + */ +esp_err_t esp_wifi_enable_rx_statistics(bool rx_stats, bool rx_mu_stats); + +/** + * @brief Enable the transmission statistics. + * + * @param[in] aci access category of the transmission + * @param[in] tx_stats indicate whether enable the transmission statistics + * + * @return + * - ESP_OK: succeed + * - ESP_ERR_NO_MEM: out of memory + */ +esp_err_t esp_wifi_enable_tx_statistics(esp_wifi_aci_t aci, bool tx_stats); + + +#ifdef __cplusplus +} +#endif diff --git a/espradio/blobs/include/esp_wifi_he_types.h b/espradio/blobs/include/esp_wifi_he_types.h new file mode 100644 index 000000000..99fc8c1b5 --- /dev/null +++ b/espradio/blobs/include/esp_wifi_he_types.h @@ -0,0 +1,225 @@ +/* + * SPDX-FileCopyrightText: 2022 Espressif Systems (Shanghai) CO LTD + * + * SPDX-License-Identifier: Apache-2.0 + */ + +#pragma once + +#include +#include +#include "esp_err.h" + +#ifdef __cplusplus +extern "C" { +#endif + +/** + * @brief Access category + */ +typedef enum { + ESP_WIFI_ACI_VO, /**< voice traffic */ + ESP_WIFI_ACI_VI, /**< video traffic */ + ESP_WIFI_ACI_BE, /**< best effort traffic */ + ESP_WIFI_ACI_BK, /**< background traffic */ + ESP_WIFI_ACI_MAX, /**< the max value */ +} esp_wifi_aci_t; + +/** + * @brief Channel state information(CSI) HE STBC CSI selection + */ +enum { + ESP_CSI_ACQUIRE_STBC_HELTF1, /**< HE STBC: select the first HE-LTF */ + ESP_CSI_ACQUIRE_STBC_HELTF2, /**< HE STBC: select the second HE-LTF */ + ESP_CSI_ACQUIRE_STBC_SAMPLE_HELTFS, /**< HE STBC: sample alternating scarier of HE-LTF1 and HE-LTF2 */ +}; + +/** + * @brief Channel state information(CSI) configuration type + */ +typedef struct { + uint32_t enable : 1; /**< enable to acquire CSI */ + uint32_t acquire_csi_legacy : 1; /**< enable to acquire L-LTF when receiving a 11g PPDU */ + uint32_t acquire_csi_ht20 : 1; /**< enable to acquire HT-LTF when receiving an HT20 PPDU */ + uint32_t acquire_csi_ht40 : 1; /**< enable to acquire HT-LTF when receiving an HT40 PPDU */ + uint32_t acquire_csi_su : 1; /**< enable to acquire HE-LTF when receiving an HE20 SU PPDU */ + uint32_t acquire_csi_mu : 1; /**< enable to acquire HE-LTF when receiving an HE20 MU PPDU */ + uint32_t acquire_csi_dcm : 1; /**< enable to acquire HE-LTF when receiving an HE20 DCM applied PPDU */ + uint32_t acquire_csi_beamformed : 1; /**< enable to acquire HE-LTF when receiving an HE20 Beamformed applied PPDU */ + uint32_t acquire_csi_he_stbc : 2; /**< when receiving an STBC applied HE PPDU, + 0- acquire the complete HE-LTF1, + 1- acquire the complete HE-LTF2 + 2- sample evenly among the HE-LTF1 and HE-LTF2 */ + uint32_t val_scale_cfg : 2; /**< value 0-3 */ + uint32_t reserved : 20; /**< reserved */ +} wifi_csi_acquire_config_t; + +/** + * @brief HE variant HT Control field including UPH(UL power headroom) and OM(Operation mode) + */ +typedef struct { + uint32_t id : 2; /**< HE Variant ID = 3 */ + uint32_t uph_id : 4; /**< UPH control ID: 4 */ + uint32_t ul_pw_headroom : 5; /**< the available UL power headroom for the current HE-MCS, unit: dB, value[0, 31] */ + uint32_t min_tx_pw_flag : 1; /**< indicate that the min. transmit power for current HE-MCS is reached, set to 0 otherwise */ + uint32_t rsvd : 2; /**< reserved */ + uint32_t ctrl_id : 4; /**< OM control ID: 1 */ + uint32_t rx_nss : 3; /**< the max. number of spatial streams for the reception, only accept 0. */ + uint32_t bw : 2; /**< the operating channel width for both reception and transmission, only accept 0. */ + uint32_t ul_mu_disable : 1; /**< disable UL MU operations */ + uint32_t tx_nsts : 3; /**< the max. number of spatial streams for the transmission, only accept 0. */ + uint32_t er_su_disable : 1; /**< disable the reception of 242-tone HE ER SU PPDU */ + uint32_t dl_mu_mimo_resounding_recommendation : 1; /**< indicate the STA suggests the AP either resounding the channel or increase the channel sounding frequency with the STA */ + uint32_t ul_mu_data_disable : 1; /**< disable UL MU data operations */ + uint32_t padding : 2; /**< padding bits */ +} esp_wifi_htc_omc_t; + +/** + * @brief TWT setup commands + */ +typedef enum { + TWT_REQUEST, /**< request to join a TWT without providing a set of TWT parameters */ + TWT_SUGGEST, /**< request to join a TWT and offer a set of preferred TWT parameters but might accept alternative TWT parameters */ + TWT_DEMAND, /**< request to join a TWT and currently accept only the indicated TWT parameters */ + TWT_GROUPING, /**< for S1G STA */ + TWT_ACCEPT, /**< accept the TWT request with the TWT parameters, also used in unsolicited TWT response */ + TWT_ALTERNATE, /**< indicate a counter-offer of TWT parameters without creation of a TWT agreement */ + TWT_DICTATE, /**< indicate no TWT agreement is created, but one is likely to be accepted only if the requesting STA transmits a new TWT setup request with the indicated TWT parameters */ + TWT_REJECT, /**< indicate that the negotiation has ended in failure to crate a new TWT agreement */ +} wifi_twt_setup_cmds_t; + +/** + * @brief HE SU GI and LTF types + */ +typedef enum { + HE_SU_ERSU_1_LTF_0_8_US_GI, /**< 1 LTF and 0.8 us GI */ + HE_SU_ERSU_2_LTF_0_8_US_GI, /**< 2 LTF and 0.8 us GI */ + HE_SU_ERSU_2_LTF_1_6_US_GI, /**< 2 LTF and 1.6 us GI */ + HE_SU_ERSU_4_LTF_3_2_US_GI, /**< 4 LTF and 3.2 us GI */ +} he_su_gi_and_ltf_type_t; + +/** + * @brief Reception format + */ +typedef enum { + RX_BB_FORMAT_11B = 0, /**< the reception frame is a 11b MPDU */ + RX_BB_FORMAT_11G = 1, /**< the reception frame is a 11g MPDU */ + RX_BB_FORMAT_HT = 2, /**< the reception frame is a HT MPDU */ + RX_BB_FORMAT_VHT = 3, /**< the reception frame is a VHT MPDU */ + RX_BB_FORMAT_HE_SU = 4, /**< the reception frame is a HE SU MPDU */ + RX_BB_FORMAT_HE_MU = 5, /**< the reception frame is a HE MU MPDU */ + RX_BB_FORMAT_HE_ERSU = 6, /**< the reception frame is a HE ER SU MPDU */ + RX_BB_FORMAT_HE_TB = 7, /**< the reception frame is a HE TB MPDU */ +} wifi_rx_bb_format_t; + +/** + * @brief RxControl Info + */ +typedef struct { + signed rssi : 8; /**< the RSSI of the reception frame */ + unsigned rate : 5; /**< if cur_bb_format is RX_BB_FORMAT_11B, it's the transmission rate. otherwise it's Rate field of L-SIG */ + unsigned : 1; /**< reserved */ + unsigned : 2; /**< reserved */ + unsigned : 12; /**< reserved */ + unsigned rxmatch0 : 1; /**< indicate whether the reception frame is from interface 0 */ + unsigned rxmatch1 : 1; /**< indicate whether the reception frame is from interface 1 */ + unsigned rxmatch2 : 1; /**< indicate whether the reception frame is from interface 2 */ + unsigned rxmatch3 : 1; /**< indicate whether the reception frame is from interface 3 */ + uint32_t he_siga1; /**< HE-SIGA1 or HT-SIG */ + unsigned rxend_state : 8; /**< reception state, 0: successful, others: failure */ + uint16_t he_siga2; /**< HE-SIGA2 */ + unsigned : 7; /**< reserved */ + unsigned is_group : 1; /**< indicate whether the reception is a group addressed frame */ + unsigned : 32; /**< reserved */ + unsigned : 15; /**< reserved */ + unsigned : 15; /**< reserved */ + unsigned : 2; /**< reserved */ + unsigned noise_floor : 8; /**< the noise floor of the reception frame */ + signed data_rssi : 8; /**< the RSSI of the DATA field */ + unsigned : 8; /**< reserved */ + unsigned : 8; /**< reserved */ + unsigned channel : 4; /**< the primary channel */ + unsigned second : 4; /**< the second channel if in HT40 */ + unsigned : 24; /**< reserved */ + unsigned : 32; /**< reserved */ + unsigned : 2; /**< reserved */ + unsigned : 4; /**< reserved */ + unsigned : 2; /**< reserved */ + unsigned rx_channel_estimate_len : 10; /**< the length of the channel information */ + unsigned rx_channel_estimate_info_vld : 1; /**< indicate the channel information is valid */ + unsigned : 1; /**< reserved */ + unsigned : 11; /**< reserved */ + unsigned : 1; /**< reserved */ + unsigned : 24; /**< reserved */ + unsigned cur_bb_format : 4; /**< the format of the reception frame */ + unsigned cur_single_mpdu : 1; /**< indicate whether the reception MPDU is a S-MPDU */ + unsigned : 3; /**< reserved */ + unsigned : 32; /**< reserved */ + unsigned : 32; /**< reserved */ + unsigned : 32; /**< reserved */ + unsigned : 32; /**< reserved */ + unsigned : 32; /**< reserved */ + unsigned : 32; /**< reserved */ + unsigned : 32; /**< reserved */ + unsigned : 32; /**< reserved */ + unsigned : 8; /**< reserved */ + unsigned he_sigb_len : 6; /**< the length of HE-SIGB */ + unsigned : 2; /**< reserved */ + unsigned : 8; /**< reserved */ + unsigned : 8; /**< reserved */ + unsigned : 32; /**< reserved */ + unsigned : 7; /**< reserved */ + unsigned : 1; /**< reserved */ + unsigned : 8; /**< reserved */ + unsigned : 16; /**< reserved */ + unsigned sig_len : 14; /**< the length of the reception MPDU */ + unsigned : 2; /**< reserved */ + unsigned dump_len : 14; /**< the length of the reception MPDU excluding the FCS */ + unsigned : 2; /**< reserved */ + unsigned rx_state : 8; /**< reception state, 0: successful, others: failure */ + unsigned : 24; /**< reserved */ +} __attribute__((packed)) esp_wifi_rxctrl_t; + +/** Argument structure for WIFI_EVENT_TWT_SET_UP event */ +typedef struct { + wifi_twt_setup_cmds_t setup_cmd; /**< TWT setup command */ + uint8_t flow_id; /**< flow id */ + uint8_t min_wake_dura; /**< the min. wake duration, unit: 256 us by default */ + uint8_t wake_invl_expn; /**< the exponent of the TWT wake interval in microseconds, base 2 */ + uint16_t wake_invl_mant; /**< the value of the mantissa of the TWT wake interval value in microseconds, base 2 */ + bool trigger; /**< true: indicates a trigger-enabled TWT, false: indicates a non-trigger-enabled TWT */ + uint8_t flow_type; /**< 0: indicate an announced TWT, 1: indicates an unannounced TWT */ +} wifi_event_sta_itwt_setup_t; + +/** Argument structure for WIFI_EVENT_TWT_TEARDOWN event */ +typedef struct { + uint8_t flow_id; /**< flow id */ +} wifi_event_sta_itwt_teardown_t; + +/** + * @brief iTWT probe status + */ +typedef enum { + ITWT_PROBE_FAIL, /**< station sends probe request fail */ + ITWT_PROBE_SUCCESS, /**< 1) station receives beacon from AP; 2) station receives probe response from AP */ + ITWT_PROBE_TIMEOUT, /**< 1) timeout of receiving ACK in response of previously probe request sending by station + 2) timeout of receiving probe response in response of previously probe request sending by station */ + ITWT_PROBE_STA_DISCONNECTED, /**< station is not connected */ +} wifi_itwt_probe_status_t; + +/** Argument structure for WIFI_EVENT_ITWT_SEND_PROBE event */ +typedef struct { + wifi_itwt_probe_status_t status; /**< probe status */ + uint8_t reason; /**< failure reason */ +} wifi_event_sta_itwt_probe_t; + +/** Argument structure for WIFI_EVENT_ITWT_SUSPEND event */ +typedef struct { + esp_err_t status; /**< suspend status */ + uint8_t flow_id_bitmap; /**< bitmap of the suspended flow id */ + uint32_t actual_suspend_time_ms[8]; /**< the actual suspend time for each flow id, unit: ms */ +} wifi_event_sta_itwt_suspend_t; + +#ifdef __cplusplus +} +#endif diff --git a/espradio/blobs/include/hal/efuse_hal.h b/espradio/blobs/include/hal/efuse_hal.h new file mode 100644 index 000000000..8b1a39374 --- /dev/null +++ b/espradio/blobs/include/hal/efuse_hal.h @@ -0,0 +1 @@ +// empty diff --git a/espradio/blobs/include/hal/gpio_types.h b/espradio/blobs/include/hal/gpio_types.h new file mode 100644 index 000000000..8b1a39374 --- /dev/null +++ b/espradio/blobs/include/hal/gpio_types.h @@ -0,0 +1 @@ +// empty diff --git a/espradio/blobs/include/include.h b/espradio/blobs/include/include.h new file mode 100644 index 000000000..50d333126 --- /dev/null +++ b/espradio/blobs/include/include.h @@ -0,0 +1,18 @@ +typedef int _lock_t; + +#define SOC_COEX_HW_PTI 1 + +#include "espidf_types.h" +#include "esp_private/wifi.h" +#include "esp_wpa.h" +#include "esp_phy_init.h" +#include "phy.h" +#include "esp_timer.h" + +#if !defined(CONFIG_IDF_TARGET_ESP32S2) +#include "esp_bt.h" +#include "esp_coexist_internal.h" +#include "esp_coexist_adapter.h" +#endif + +#include "esp_now.h" diff --git a/espradio/blobs/include/nimble/nimble_npl.h b/espradio/blobs/include/nimble/nimble_npl.h new file mode 100644 index 000000000..c11a2972d --- /dev/null +++ b/espradio/blobs/include/nimble/nimble_npl.h @@ -0,0 +1,180 @@ +/* + * Licensed to the Apache Software Foundation (ASF) under one + * or more contributor license agreements. See the NOTICE file + * distributed with this work for additional information + * regarding copyright ownership. The ASF licenses this file + * to you under the Apache License, Version 2.0 (the + * "License"); you may not use this file except in compliance + * with the License. You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, + * software distributed under the License is distributed on an + * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY + * KIND, either express or implied. See the License for the + * specific language governing permissions and limitations + * under the License. + */ + +#ifndef _NIMBLE_NPL_H_ +#define _NIMBLE_NPL_H_ + +#include +#include +#include + +#ifdef __cplusplus +extern "C" { +#endif + +struct ble_npl_event; +typedef void ble_npl_event_fn(struct ble_npl_event *ev); + +enum ble_npl_error { + BLE_NPL_OK = 0, + BLE_NPL_ENOMEM = 1, + BLE_NPL_EINVAL = 2, + BLE_NPL_INVALID_PARAM = 3, + BLE_NPL_MEM_NOT_ALIGNED = 4, + BLE_NPL_BAD_MUTEX = 5, + BLE_NPL_TIMEOUT = 6, + BLE_NPL_ERR_IN_ISR = 7, + BLE_NPL_ERR_PRIV = 8, + BLE_NPL_OS_NOT_STARTED = 9, + BLE_NPL_ENOENT = 10, + BLE_NPL_EBUSY = 11, + BLE_NPL_ERROR = 12, +}; + +typedef enum ble_npl_error ble_npl_error_t; + +/* Include OS-specific definitions */ +#include "nimble/nimble_npl_os.h" + +/* + * Generic + */ + +bool ble_npl_os_started(void); + +void *ble_npl_get_current_task_id(void); + +/* + * Event queue + */ + +void ble_npl_eventq_init(struct ble_npl_eventq *evq); + +void ble_npl_eventq_deinit(struct ble_npl_eventq *evq); + +struct ble_npl_event *ble_npl_eventq_get(struct ble_npl_eventq *evq, + ble_npl_time_t tmo); + +void ble_npl_eventq_put(struct ble_npl_eventq *evq, struct ble_npl_event *ev); + +void ble_npl_eventq_remove(struct ble_npl_eventq *evq, + struct ble_npl_event *ev); + +void ble_npl_event_init(struct ble_npl_event *ev, ble_npl_event_fn *fn, + void *arg); + +bool ble_npl_event_is_queued(struct ble_npl_event *ev); + +void *ble_npl_event_get_arg(struct ble_npl_event *ev); + +void ble_npl_event_set_arg(struct ble_npl_event *ev, void *arg); + +bool ble_npl_eventq_is_empty(struct ble_npl_eventq *evq); + +void ble_npl_event_run(struct ble_npl_event *ev); + +/* + * Mutexes + */ + +ble_npl_error_t ble_npl_mutex_init(struct ble_npl_mutex *mu); + +ble_npl_error_t ble_npl_mutex_pend(struct ble_npl_mutex *mu, + ble_npl_time_t timeout); + +ble_npl_error_t ble_npl_mutex_release(struct ble_npl_mutex *mu); + +ble_npl_error_t ble_npl_mutex_deinit(struct ble_npl_mutex *mu); + +/* + * Semaphores + */ + +ble_npl_error_t ble_npl_sem_init(struct ble_npl_sem *sem, uint16_t tokens); + +ble_npl_error_t ble_npl_sem_pend(struct ble_npl_sem *sem, + ble_npl_time_t timeout); + +ble_npl_error_t ble_npl_sem_release(struct ble_npl_sem *sem); + +ble_npl_error_t ble_npl_sem_deinit(struct ble_npl_sem *sem); + +uint16_t ble_npl_sem_get_count(struct ble_npl_sem *sem); + +/* + * Callouts + */ + +int ble_npl_callout_init(struct ble_npl_callout *co, struct ble_npl_eventq *evq, + ble_npl_event_fn *ev_cb, void *ev_arg); + +ble_npl_error_t ble_npl_callout_reset(struct ble_npl_callout *co, + ble_npl_time_t ticks); + +void ble_npl_callout_stop(struct ble_npl_callout *co); + +bool ble_npl_callout_is_active(struct ble_npl_callout *co); + +ble_npl_time_t ble_npl_callout_get_ticks(struct ble_npl_callout *co); + +ble_npl_time_t ble_npl_callout_remaining_ticks(struct ble_npl_callout *co, + ble_npl_time_t time); + +void ble_npl_callout_set_arg(struct ble_npl_callout *co, + void *arg); +/* + * Time functions + */ + +ble_npl_time_t ble_npl_time_get(void); + +ble_npl_error_t ble_npl_time_ms_to_ticks(uint32_t ms, ble_npl_time_t *out_ticks); + +ble_npl_error_t ble_npl_time_ticks_to_ms(ble_npl_time_t ticks, uint32_t *out_ms); + +ble_npl_time_t ble_npl_time_ms_to_ticks32(uint32_t ms); + +uint32_t ble_npl_time_ticks_to_ms32(ble_npl_time_t ticks); + +void ble_npl_time_delay(ble_npl_time_t ticks); + +/* + * Hardware-specific + * + * These symbols should be most likely defined by application since they are + * specific to hardware, not to OS. + */ + +#if NIMBLE_CFG_CONTROLLER + +void ble_npl_hw_set_isr(int irqn, uint32_t addr); + +#endif + +uint32_t ble_npl_hw_enter_critical(void); + +void ble_npl_hw_exit_critical(uint32_t ctx); + +bool ble_npl_hw_is_in_critical(void); + +#ifdef __cplusplus +} +#endif + +#endif /* _NIMBLE_NPL_H_ */ diff --git a/espradio/blobs/include/nimble/nimble_npl_os.h b/espradio/blobs/include/nimble/nimble_npl_os.h new file mode 100644 index 000000000..996aed23d --- /dev/null +++ b/espradio/blobs/include/nimble/nimble_npl_os.h @@ -0,0 +1,60 @@ +/* + * Licensed to the Apache Software Foundation (ASF) under one + * or more contributor license agreements. See the NOTICE file + * distributed with this work for additional information + * regarding copyright ownership. The ASF licenses this file + * to you under the Apache License, Version 2.0 (the + * "License"); you may not use this file except in compliance + * with the License. You may obtain a copy of the License at + * + * http://www.apache.org/licenses/LICENSE-2.0 + * + * Unless required by applicable law or agreed to in writing, + * software distributed under the License is distributed on an + * "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY + * KIND, either express or implied. See the License for the + * specific language governing permissions and limitations + * under the License. + */ + +#ifndef _NIMBLE_NPL_OS_H_ +#define _NIMBLE_NPL_OS_H_ + +#include + +#ifdef __cplusplus +extern "C" { +#endif + +#define BLE_NPL_OS_ALIGNMENT 4 + +#define BLE_NPL_TIME_FOREVER UINT32_MAX + +typedef uint32_t ble_npl_time_t; +typedef int32_t ble_npl_stime_t; + +struct ble_npl_event { + int dummy; +}; + +struct ble_npl_eventq { + int dummy; +}; + +struct ble_npl_callout { + int dummy; +}; + +struct ble_npl_mutex { + int dummy; +}; + +struct ble_npl_sem { + int dummy; +}; + +#ifdef __cplusplus +} +#endif + +#endif /* _NPL_H_ */ diff --git a/espradio/blobs/include/sdkconfig.h b/espradio/blobs/include/sdkconfig.h new file mode 100644 index 000000000..e69de29bb diff --git a/espradio/blobs/libs/esp32c3/libbtbb.a b/espradio/blobs/libs/esp32c3/libbtbb.a new file mode 100644 index 000000000..0e05fd909 Binary files /dev/null and b/espradio/blobs/libs/esp32c3/libbtbb.a differ diff --git a/espradio/blobs/libs/esp32c3/libbtdm_app.a b/espradio/blobs/libs/esp32c3/libbtdm_app.a new file mode 100644 index 000000000..cfa9baf69 Binary files /dev/null and b/espradio/blobs/libs/esp32c3/libbtdm_app.a differ diff --git a/espradio/blobs/libs/esp32c3/libbttestmode.a b/espradio/blobs/libs/esp32c3/libbttestmode.a new file mode 100644 index 000000000..9c71898f6 Binary files /dev/null and b/espradio/blobs/libs/esp32c3/libbttestmode.a differ diff --git a/espradio/blobs/libs/esp32c3/libcoexist.a b/espradio/blobs/libs/esp32c3/libcoexist.a new file mode 100644 index 000000000..90ec6e287 Binary files /dev/null and b/espradio/blobs/libs/esp32c3/libcoexist.a differ diff --git a/espradio/blobs/libs/esp32c3/libcore.a b/espradio/blobs/libs/esp32c3/libcore.a new file mode 100644 index 000000000..637872885 Binary files /dev/null and b/espradio/blobs/libs/esp32c3/libcore.a differ diff --git a/espradio/blobs/libs/esp32c3/libespnow.a b/espradio/blobs/libs/esp32c3/libespnow.a new file mode 100644 index 000000000..f9339d25c Binary files /dev/null and b/espradio/blobs/libs/esp32c3/libespnow.a differ diff --git a/espradio/blobs/libs/esp32c3/libmesh.a b/espradio/blobs/libs/esp32c3/libmesh.a new file mode 100644 index 000000000..bb6f8e742 Binary files /dev/null and b/espradio/blobs/libs/esp32c3/libmesh.a differ diff --git a/espradio/blobs/libs/esp32c3/libnet80211.a b/espradio/blobs/libs/esp32c3/libnet80211.a new file mode 100644 index 000000000..0b57fee81 Binary files /dev/null and b/espradio/blobs/libs/esp32c3/libnet80211.a differ diff --git a/espradio/blobs/libs/esp32c3/libphy.a b/espradio/blobs/libs/esp32c3/libphy.a new file mode 100644 index 000000000..8e0efdf20 Binary files /dev/null and b/espradio/blobs/libs/esp32c3/libphy.a differ diff --git a/espradio/blobs/libs/esp32c3/libpp.a b/espradio/blobs/libs/esp32c3/libpp.a new file mode 100644 index 000000000..5cfd1bd56 Binary files /dev/null and b/espradio/blobs/libs/esp32c3/libpp.a differ diff --git a/espradio/blobs/libs/esp32c3/librfate.a b/espradio/blobs/libs/esp32c3/librfate.a new file mode 100644 index 000000000..5aee97a40 Binary files /dev/null and b/espradio/blobs/libs/esp32c3/librfate.a differ diff --git a/espradio/blobs/libs/esp32c3/librftest.a b/espradio/blobs/libs/esp32c3/librftest.a new file mode 100644 index 000000000..40a551ef8 Binary files /dev/null and b/espradio/blobs/libs/esp32c3/librftest.a differ diff --git a/espradio/blobs/libs/esp32c3/libsmartconfig.a b/espradio/blobs/libs/esp32c3/libsmartconfig.a new file mode 100644 index 000000000..e5ed7e474 Binary files /dev/null and b/espradio/blobs/libs/esp32c3/libsmartconfig.a differ diff --git a/espradio/blobs/libs/esp32c3/libwapi.a b/espradio/blobs/libs/esp32c3/libwapi.a new file mode 100644 index 000000000..88936fea3 Binary files /dev/null and b/espradio/blobs/libs/esp32c3/libwapi.a differ diff --git a/espradio/blobs/libs/esp32c3/libwpa_supplicant.a b/espradio/blobs/libs/esp32c3/libwpa_supplicant.a new file mode 100644 index 000000000..751f1f164 Binary files /dev/null and b/espradio/blobs/libs/esp32c3/libwpa_supplicant.a differ diff --git a/espradio/error.go b/espradio/error.go new file mode 100644 index 000000000..b2c78b323 --- /dev/null +++ b/espradio/error.go @@ -0,0 +1,44 @@ +package espradio + +/* +#include "include.h" +*/ +import "C" + +// Error is an error from the radio stack. +type Error C.esp_err_t + +func (e Error) Error() string { + switch { + case e >= C.ESP_ERR_MEMPROT_BASE: + return "espradio: unknown memprot error" + case e >= C.ESP_ERR_HW_CRYPTO_BASE: + return "espradio: unknown hw crypto error" + case e >= C.ESP_ERR_FLASH_BASE: + return "espradio: unknown flash error" + case e >= C.ESP_ERR_MESH_BASE: + return "espradio: unknown mesh error" + case e >= C.ESP_ERR_WIFI_BASE: + return "espradio: unknown wifi error" + default: + switch e { + case C.ESP_OK: + return "espradio: no error" // invalid usage of the Error type + case C.ESP_ERR_NO_MEM: + return "espradio: no memory" + case C.ESP_ERR_INVALID_ARG: + return "espradio: invalid argument" + default: + return "espradio: unknown error" + } + } +} + +// makeError returns an error (using the Error type) if the error code is +// non-zero, otherwise it returns nil. +func makeError(errCode C.esp_err_t) error { + if errCode != 0 { + return Error(errCode) + } + return nil +} diff --git a/espradio/osi.c b/espradio/osi.c new file mode 100644 index 000000000..3d071a83d --- /dev/null +++ b/espradio/osi.c @@ -0,0 +1,556 @@ +//go:build esp32c3 + +#include "include.h" +#include + +// Documentation for these functions: +// https://github.com/esp-rs/esp-wifi/blob/main/esp-wifi/src/wifi/os_adapter.rs + +__attribute__((noreturn)) +void espradio_panic(char *s); + +static bool espradio_env_is_chip(void) { + espradio_panic("todo: _env_is_chip"); +} + +static void espradio_set_intr(int32_t cpu_no, uint32_t intr_source, uint32_t intr_num, int32_t intr_prio) { + espradio_panic("todo: _set_intr"); +} + +static void espradio_clear_intr(uint32_t intr_source, uint32_t intr_num) { + espradio_panic("todo: _clear_intr"); +} + +static void espradio_set_isr(int32_t n, void *f, void *arg) { + espradio_panic("todo: _set_isr"); +} + +static void espradio_ints_on(uint32_t mask) { + espradio_panic("todo: _ints_on"); +} + +static void espradio_ints_off(uint32_t mask) { + espradio_panic("todo: _ints_off"); +} + +static bool espradio_is_from_isr(void) { + espradio_panic("todo: _is_from_isr"); +} + +void *espradio_spin_lock_create(void); + +void espradio_spin_lock_delete(void *lock); + +uint32_t espradio_wifi_int_disable(void *wifi_int_mux); + +void espradio_wifi_int_restore(void *wifi_int_mux, uint32_t tmp); + +static void espradio_task_yield_from_isr(void) { + espradio_panic("todo: _task_yield_from_isr"); +} + +void *espradio_semphr_create(uint32_t max, uint32_t init); + +void espradio_semphr_delete(void *semphr); + +int32_t espradio_semphr_take(void *semphr, uint32_t block_time_tick); + +int32_t espradio_semphr_give(void *semphr); + +void *espradio_wifi_thread_semphr_get(void); + +static void *espradio_mutex_create(void) { + espradio_panic("todo: _mutex_create"); +} + +void *espradio_recursive_mutex_create(void); + +static void espradio_mutex_delete(void *mutex) { + espradio_panic("todo: _mutex_delete"); +} + +int32_t espradio_mutex_lock(void *mutex); + +int32_t espradio_mutex_unlock(void *mutex); + +static void *espradio_queue_create(uint32_t queue_len, uint32_t item_size) { + espradio_panic("todo: _queue_create"); +} + +static void espradio_queue_delete(void *queue) { + espradio_panic("todo: _queue_delete"); +} + +int32_t espradio_queue_send(void *queue, void *item, uint32_t block_time_tick); + +static int32_t espradio_queue_send_from_isr(void *queue, void *item, void *hptw) { + espradio_panic("todo: _queue_send_from_isr"); +} + +static int32_t espradio_queue_send_to_back(void *queue, void *item, uint32_t block_time_tick) { + espradio_panic("todo: _queue_send_to_back"); +} + +static int32_t espradio_queue_send_to_front(void *queue, void *item, uint32_t block_time_tick) { + espradio_panic("todo: _queue_send_to_front"); +} + +int32_t espradio_queue_recv(void *queue, void *item, uint32_t block_time_tick); + +static uint32_t espradio_queue_msg_waiting(void *queue) { + espradio_panic("todo: _queue_msg_waiting"); +} + +static void *espradio_event_group_create(void) { + espradio_panic("todo: _event_group_create"); +} + +static void espradio_event_group_delete(void *event) { + espradio_panic("todo: _event_group_delete"); +} + +static uint32_t espradio_event_group_set_bits(void *event, uint32_t bits) { + espradio_panic("todo: _event_group_set_bits"); +} + +static uint32_t espradio_event_group_clear_bits(void *event, uint32_t bits) { + espradio_panic("todo: _event_group_clear_bits"); +} + +static uint32_t espradio_event_group_wait_bits(void *event, uint32_t bits_to_wait_for, int clear_on_exit, int wait_for_all_bits, uint32_t block_time_tick) { + espradio_panic("todo: _event_group_wait_bits"); +} + +void espradio_run_task(void *task_func, void *task_handle) { + void (*fn)(void *task_handle) = task_func; + fn(task_handle); +} + +int32_t espradio_task_create_pinned_to_core(void *task_func, const char *name, uint32_t stack_depth, void *param, uint32_t prio, void *task_handle, uint32_t core_id); + +static int32_t espradio_task_create(void *task_func, const char *name, uint32_t stack_depth, void *param, uint32_t prio, void *task_handle) { + espradio_panic("todo: _task_create"); +} + +void espradio_task_delete(void *task_handle); + +void espradio_task_delay(uint32_t tick); + +int32_t espradio_task_ms_to_tick(uint32_t ms); + +void *espradio_task_get_current_task(void); + +static int32_t espradio_task_get_max_priority(void) { + return 255; // arbitrary number +} + +static void *espradio_malloc(size_t size) { + espradio_panic("todo: _malloc"); +} + +static void espradio_free(void *p) { + free(p); +} + +static int32_t espradio_event_post(const char* event_base, int32_t event_id, void* event_data, size_t event_data_size, uint32_t ticks_to_wait) { + espradio_panic("todo: _event_post"); +} + +static uint32_t espradio_get_free_heap_size(void) { + espradio_panic("todo: _get_free_heap_size"); +} + +static uint32_t espradio_rand(void) { + espradio_panic("todo: _rand"); +} + +static void espradio_dport_access_stall_other_cpu_start_wrap(void) { + espradio_panic("todo: _dport_access_stall_other_cpu_start_wrap"); +} + +static void espradio_dport_access_stall_other_cpu_end_wrap(void) { + espradio_panic("todo: _dport_access_stall_other_cpu_end_wrap"); +} + +static void espradio_wifi_apb80m_request(void) { + espradio_panic("todo: _wifi_apb80m_request"); +} + +static void espradio_wifi_apb80m_release(void) { + espradio_panic("todo: _wifi_apb80m_release"); +} + +static void espradio_phy_disable(void) { + espradio_panic("todo: _phy_disable"); +} + +static void espradio_phy_enable(void) { + espradio_panic("todo: _phy_enable"); +} + +static int espradio_phy_update_country_info(const char* country) { + espradio_panic("todo: _phy_update_country_info"); +} + +static int espradio_read_mac(uint8_t* mac, unsigned int type) { + espradio_panic("todo: _read_mac"); +} + +static void espradio_timer_arm(void *timer, uint32_t tmout, bool repeat) { + espradio_panic("todo: _timer_arm"); +} + +static void espradio_timer_disarm(void *timer) { + espradio_panic("todo: _timer_disarm"); +} + +static void espradio_timer_done(void *ptimer) { + espradio_panic("todo: _timer_done"); +} + +static void espradio_timer_setfn(void *ptimer, void *pfunction, void *parg) { + espradio_panic("todo: _timer_setfn"); +} + +static void espradio_timer_arm_us(void *ptimer, uint32_t us, bool repeat) { + espradio_panic("todo: _timer_arm_us"); +} + +static void espradio_wifi_reset_mac(void) { + espradio_panic("todo: _wifi_reset_mac"); +} + +static void espradio_wifi_clock_enable(void) { + espradio_panic("todo: _wifi_clock_enable"); +} + +static void espradio_wifi_clock_disable(void) { + espradio_panic("todo: _wifi_clock_disable"); +} + +static void espradio_wifi_rtc_enable_iso(void) { + espradio_panic("todo: _wifi_rtc_enable_iso"); +} + +static void espradio_wifi_rtc_disable_iso(void) { + espradio_panic("todo: _wifi_rtc_disable_iso"); +} + +static int64_t espradio_esp_timer_get_time(void) { + espradio_panic("todo: _esp_timer_get_time"); +} + +static int espradio_nvs_set_i8(uint32_t handle, const char* key, int8_t value) { + espradio_panic("todo: _nvs_set_i8"); +} + +static int espradio_nvs_get_i8(uint32_t handle, const char* key, int8_t* out_value) { + espradio_panic("todo: _nvs_get_i8"); +} + +static int espradio_nvs_set_u8(uint32_t handle, const char* key, uint8_t value) { + espradio_panic("todo: _nvs_set_u8"); +} + +static int espradio_nvs_get_u8(uint32_t handle, const char* key, uint8_t* out_value) { + espradio_panic("todo: _nvs_get_u8"); +} + +static int espradio_nvs_set_u16(uint32_t handle, const char* key, uint16_t value) { + espradio_panic("todo: _nvs_set_u16"); +} + +static int espradio_nvs_get_u16(uint32_t handle, const char* key, uint16_t* out_value) { + espradio_panic("todo: _nvs_get_u16"); +} + +static int espradio_nvs_open(const char* name, unsigned int open_mode, uint32_t *out_handle) { + espradio_panic("todo: _nvs_open"); +} + +static void espradio_nvs_close(uint32_t handle) { + espradio_panic("todo: _nvs_close"); +} + +static int espradio_nvs_commit(uint32_t handle) { + espradio_panic("todo: _nvs_commit"); +} + +static int espradio_nvs_set_blob(uint32_t handle, const char* key, const void* value, size_t length) { + espradio_panic("todo: _nvs_set_blob"); +} + +static int espradio_nvs_get_blob(uint32_t handle, const char* key, void* out_value, size_t* length) { + espradio_panic("todo: _nvs_get_blob"); +} + +static int espradio_nvs_erase_key(uint32_t handle, const char* key) { + espradio_panic("todo: _nvs_erase_key"); +} + +static int espradio_get_random(uint8_t *buf, size_t len) { + espradio_panic("todo: _get_random"); +} + +static int espradio_get_time(void *t) { + espradio_panic("todo: _get_time"); +} + +static unsigned long espradio_random(void) { + espradio_panic("todo: _random"); +} + +static uint32_t espradio_slowclk_cal_get(void) { + espradio_panic("todo: _slowclk_cal_get"); +} + +static void espradio_log_writev(unsigned int level, const char* tag, const char* format, va_list args) { + // Note: 'level' and 'tag' may be used to filter log messages. + vprintf(format, args); +} + +static void espradio_log_write(unsigned int level, const char* tag, const char* format, ...) { + va_list args; + va_start(args, format); + espradio_log_writev(level, tag, format, args); + va_end(args); +} + +uint32_t espradio_log_timestamp(void); + +static void * espradio_malloc_internal(size_t size) { + return malloc(size); +} + +static void * espradio_realloc_internal(void *ptr, size_t size) { + espradio_panic("todo: _realloc_internal"); +} + +static void * espradio_calloc_internal(size_t n, size_t size) { + return calloc(n, size); +} + +static void * espradio_zalloc_internal(size_t size) { + espradio_panic("todo: _zalloc_internal"); +} + +static void * espradio_wifi_malloc(size_t size) { + espradio_panic("todo: _wifi_malloc"); +} + +static void * espradio_wifi_realloc(void *ptr, size_t size) { + espradio_panic("todo: _wifi_realloc"); +} + +static void * espradio_wifi_calloc(size_t n, size_t size) { + espradio_panic("todo: _wifi_calloc"); +} + +static void * espradio_wifi_zalloc(size_t size) { + return calloc(1, size); +} + +void * espradio_wifi_create_queue(int queue_len, int item_size); + +void espradio_wifi_delete_queue(void * queue); + +static int espradio_coex_init(void) { + espradio_panic("todo: _coex_init"); +} + +static void espradio_coex_deinit(void) { + espradio_panic("todo: _coex_deinit"); +} + +static int espradio_coex_enable(void) { + espradio_panic("todo: _coex_enable"); +} + +static void espradio_coex_disable(void) { + espradio_panic("todo: _coex_disable"); +} + +static uint32_t espradio_coex_status_get(void) { + espradio_panic("todo: _coex_status_get"); +} + +static void espradio_coex_condition_set(uint32_t type, bool dissatisfy) { + espradio_panic("todo: _coex_condition_set"); +} + +static int espradio_coex_wifi_request(uint32_t event, uint32_t latency, uint32_t duration) { + espradio_panic("todo: _coex_wifi_request"); +} + +static int espradio_coex_wifi_release(uint32_t event) { + espradio_panic("todo: _coex_wifi_release"); +} + +static int espradio_coex_wifi_channel_set(uint8_t primary, uint8_t secondary) { + espradio_panic("todo: _coex_wifi_channel_set"); +} + +static int espradio_coex_event_duration_get(uint32_t event, uint32_t *duration) { + espradio_panic("todo: _coex_event_duration_get"); +} + +static int espradio_coex_pti_get(uint32_t event, uint8_t *pti) { + espradio_panic("todo: _coex_pti_get"); +} + +static void espradio_coex_schm_status_bit_clear(uint32_t type, uint32_t status) { + espradio_panic("todo: _coex_schm_status_bit_clear"); +} + +static void espradio_coex_schm_status_bit_set(uint32_t type, uint32_t status) { + espradio_panic("todo: _coex_schm_status_bit_set"); +} + +static int espradio_coex_schm_interval_set(uint32_t interval) { + espradio_panic("todo: _coex_schm_interval_set"); +} + +static uint32_t espradio_coex_schm_interval_get(void) { + espradio_panic("todo: _coex_schm_interval_get"); +} + +static uint8_t espradio_coex_schm_curr_period_get(void) { + espradio_panic("todo: _coex_schm_curr_period_get"); +} + +static void * espradio_coex_schm_curr_phase_get(void) { + espradio_panic("todo: _coex_schm_curr_phase_get"); +} + +static int espradio_coex_schm_process_restart(void) { + espradio_panic("todo: _coex_schm_process_restart"); +} + +static int espradio_coex_schm_register_cb(int type, int (* cb)(int)) { + espradio_panic("todo: _coex_schm_register_cb"); +} + +static int espradio_coex_register_start_cb(int (* cb)(void)) { + espradio_panic("todo: _coex_register_start_cb"); +} + + +wifi_osi_funcs_t espradio_osi_funcs = { + ._version = ESP_WIFI_OS_ADAPTER_VERSION, + ._env_is_chip = espradio_env_is_chip, + ._set_intr = espradio_set_intr, + ._clear_intr = espradio_clear_intr, + ._set_isr = espradio_set_isr, + ._ints_on = espradio_ints_on, + ._ints_off = espradio_ints_off, + ._is_from_isr = espradio_is_from_isr, + ._spin_lock_create = espradio_spin_lock_create, + ._spin_lock_delete = espradio_spin_lock_delete, + ._wifi_int_disable = espradio_wifi_int_disable, + ._wifi_int_restore = espradio_wifi_int_restore, + ._task_yield_from_isr = espradio_task_yield_from_isr, + ._semphr_create = espradio_semphr_create, + ._semphr_delete = espradio_semphr_delete, + ._semphr_take = espradio_semphr_take, + ._semphr_give = espradio_semphr_give, + ._wifi_thread_semphr_get = espradio_wifi_thread_semphr_get, + ._mutex_create = espradio_mutex_create, + ._recursive_mutex_create = espradio_recursive_mutex_create, + ._mutex_delete = espradio_mutex_delete, + ._mutex_lock = espradio_mutex_lock, + ._mutex_unlock = espradio_mutex_unlock, + ._queue_create = espradio_queue_create, + ._queue_delete = espradio_queue_delete, + ._queue_send = espradio_queue_send, + ._queue_send_from_isr = espradio_queue_send_from_isr, + ._queue_send_to_back = espradio_queue_send_to_back, + ._queue_send_to_front = espradio_queue_send_to_front, + ._queue_recv = espradio_queue_recv, + ._queue_msg_waiting = espradio_queue_msg_waiting, + ._event_group_create = espradio_event_group_create, + ._event_group_delete = espradio_event_group_delete, + ._event_group_set_bits = espradio_event_group_set_bits, + ._event_group_clear_bits = espradio_event_group_clear_bits, + ._event_group_wait_bits = espradio_event_group_wait_bits, + ._task_create_pinned_to_core = espradio_task_create_pinned_to_core, + ._task_create = espradio_task_create, + ._task_delete = espradio_task_delete, + ._task_delay = espradio_task_delay, + ._task_ms_to_tick = espradio_task_ms_to_tick, + ._task_get_current_task = espradio_task_get_current_task, + ._task_get_max_priority = espradio_task_get_max_priority, + ._malloc = espradio_malloc, + ._free = espradio_free, + ._event_post = espradio_event_post, + ._get_free_heap_size = espradio_get_free_heap_size, + ._rand = espradio_rand, + ._dport_access_stall_other_cpu_start_wrap = espradio_dport_access_stall_other_cpu_start_wrap, + ._dport_access_stall_other_cpu_end_wrap = espradio_dport_access_stall_other_cpu_end_wrap, + ._wifi_apb80m_request = espradio_wifi_apb80m_request, + ._wifi_apb80m_release = espradio_wifi_apb80m_release, + ._phy_disable = espradio_phy_disable, + ._phy_enable = espradio_phy_enable, + ._phy_update_country_info = espradio_phy_update_country_info, + ._read_mac = espradio_read_mac, + ._timer_arm = espradio_timer_arm, + ._timer_disarm = espradio_timer_disarm, + ._timer_done = espradio_timer_done, + ._timer_setfn = espradio_timer_setfn, + ._timer_arm_us = espradio_timer_arm_us, + ._wifi_reset_mac = espradio_wifi_reset_mac, + ._wifi_clock_enable = espradio_wifi_clock_enable, + ._wifi_clock_disable = espradio_wifi_clock_disable, + ._wifi_rtc_enable_iso = espradio_wifi_rtc_enable_iso, + ._wifi_rtc_disable_iso = espradio_wifi_rtc_disable_iso, + ._esp_timer_get_time = espradio_esp_timer_get_time, + ._nvs_set_i8 = espradio_nvs_set_i8, + ._nvs_get_i8 = espradio_nvs_get_i8, + ._nvs_set_u8 = espradio_nvs_set_u8, + ._nvs_get_u8 = espradio_nvs_get_u8, + ._nvs_set_u16 = espradio_nvs_set_u16, + ._nvs_get_u16 = espradio_nvs_get_u16, + ._nvs_open = espradio_nvs_open, + ._nvs_close = espradio_nvs_close, + ._nvs_commit = espradio_nvs_commit, + ._nvs_set_blob = espradio_nvs_set_blob, + ._nvs_get_blob = espradio_nvs_get_blob, + ._nvs_erase_key = espradio_nvs_erase_key, + ._get_random = espradio_get_random, + ._get_time = espradio_get_time, + ._random = espradio_random, + ._slowclk_cal_get = espradio_slowclk_cal_get, + ._log_write = espradio_log_write, + ._log_writev = espradio_log_writev, + ._log_timestamp = espradio_log_timestamp, + ._malloc_internal = espradio_malloc_internal, + ._realloc_internal = espradio_realloc_internal, + ._calloc_internal = espradio_calloc_internal, + ._zalloc_internal = espradio_zalloc_internal, + ._wifi_malloc = espradio_wifi_malloc, + ._wifi_realloc = espradio_wifi_realloc, + ._wifi_calloc = espradio_wifi_calloc, + ._wifi_zalloc = espradio_wifi_zalloc, + ._wifi_create_queue = espradio_wifi_create_queue, + ._wifi_delete_queue = espradio_wifi_delete_queue, + ._coex_init = espradio_coex_init, + ._coex_deinit = espradio_coex_deinit, + ._coex_enable = espradio_coex_enable, + ._coex_disable = espradio_coex_disable, + ._coex_status_get = espradio_coex_status_get, + ._coex_condition_set = espradio_coex_condition_set, + ._coex_wifi_request = espradio_coex_wifi_request, + ._coex_wifi_release = espradio_coex_wifi_release, + ._coex_wifi_channel_set = espradio_coex_wifi_channel_set, + ._coex_event_duration_get = espradio_coex_event_duration_get, + ._coex_pti_get = espradio_coex_pti_get, + ._coex_schm_status_bit_clear = espradio_coex_schm_status_bit_clear, + ._coex_schm_status_bit_set = espradio_coex_schm_status_bit_set, + ._coex_schm_interval_set = espradio_coex_schm_interval_set, + ._coex_schm_interval_get = espradio_coex_schm_interval_get, + ._coex_schm_curr_period_get = espradio_coex_schm_curr_period_get, + ._coex_schm_curr_phase_get = espradio_coex_schm_curr_phase_get, + ._coex_schm_process_restart = espradio_coex_schm_process_restart, + ._coex_schm_register_cb = espradio_coex_schm_register_cb, + ._coex_register_start_cb = espradio_coex_register_start_cb, + ._magic = ESP_WIFI_OS_ADAPTER_MAGIC, +}; diff --git a/espradio/radio.c b/espradio/radio.c new file mode 100644 index 000000000..309776eb8 --- /dev/null +++ b/espradio/radio.c @@ -0,0 +1,66 @@ +//go:build esp32c3 + +#include "sdkconfig.h" +#include "include.h" +#include + +// defined in osi.c +extern wifi_osi_funcs_t espradio_osi_funcs; + +wifi_init_config_t wifi_config = { + .osi_funcs = &espradio_osi_funcs, + .wpa_crypto_funcs = { + .size = sizeof(wpa_crypto_funcs_t), + .version = ESP_WIFI_CRYPTO_VERSION, + // TODO: fill in these functions + }, + .static_rx_buf_num = CONFIG_ESP_WIFI_STATIC_RX_BUFFER_NUM, + .dynamic_rx_buf_num = CONFIG_ESP_WIFI_DYNAMIC_RX_BUFFER_NUM, + .tx_buf_type = CONFIG_ESP_WIFI_TX_BUFFER_TYPE, + .static_tx_buf_num = WIFI_STATIC_TX_BUFFER_NUM, + .dynamic_tx_buf_num = WIFI_DYNAMIC_TX_BUFFER_NUM, + .rx_mgmt_buf_type = CONFIG_ESP_WIFI_DYNAMIC_RX_MGMT_BUF, + .rx_mgmt_buf_num = WIFI_RX_MGMT_BUF_NUM_DEF, + .cache_tx_buf_num = WIFI_CACHE_TX_BUFFER_NUM, + .csi_enable = WIFI_CSI_ENABLED, + .ampdu_rx_enable = WIFI_AMPDU_RX_ENABLED, + .ampdu_tx_enable = WIFI_AMPDU_TX_ENABLED, + .amsdu_tx_enable = WIFI_AMSDU_TX_ENABLED, + .nvs_enable = 0, // currently unsupported + .nano_enable = WIFI_NANO_FORMAT_ENABLED, + .rx_ba_win = WIFI_DEFAULT_RX_BA_WIN, + .wifi_task_core_id = WIFI_TASK_CORE_ID, + .beacon_max_len = WIFI_SOFTAP_BEACON_MAX_LEN, + .mgmt_sbuf_num = WIFI_MGMT_SBUF_NUM, + .feature_caps = WIFI_FEATURE_CAPS, + .sta_disconnected_pm = WIFI_STA_DISCONNECTED_PM_ENABLED, + .espnow_max_encrypt_num = CONFIG_ESP_WIFI_ESPNOW_MAX_ENCRYPT_NUM, + .magic = WIFI_INIT_CONFIG_MAGIC +}; + +static char evt; +esp_event_base_t const WIFI_EVENT = &evt; + +void net80211_printf(const char *format, ...) { + va_list args; + va_start(args, format); + printf("espradio net80211: "); + vprintf(format, args); + va_end(args); +} + +void phy_printf(const char *format, ...) { + va_list args; + va_start(args, format); + printf("espradio phy: "); + vprintf(format, args); + va_end(args); +} + +void pp_printf(const char *format, ...) { + va_list args; + va_start(args, format); + printf("espradio pp: "); + vprintf(format, args); + va_end(args); +} diff --git a/espradio/radio.go b/espradio/radio.go new file mode 100644 index 000000000..f346f65a2 --- /dev/null +++ b/espradio/radio.go @@ -0,0 +1,133 @@ +package espradio + +/* +// TODO: vary these by chip +#cgo CFLAGS: -Iblobs/headers +#cgo CFLAGS: -Iblobs/headers/esp32c3 +#cgo CFLAGS: -Iblobs/include +#cgo LDFLAGS: -Lblobs/libs/esp32c3 -lcore -lmesh -lnet80211 -lphy -lpp -lwpa_supplicant + +#include "include.h" +extern wifi_init_config_t wifi_config; +*/ +import "C" +import ( + "runtime/interrupt" + "time" + "unsafe" +) + +type LogLevel uint8 + +// Various log levels to use inside the espradio. Higher log levels will produce +// more output over the serial console. +const ( + LogLevelNone = C.WIFI_LOG_NONE + LogLevelError = C.WIFI_LOG_ERROR + LogLevelWarning = C.WIFI_LOG_WARNING + LogLevelInfo = C.WIFI_LOG_INFO + LogLevelDebug = C.WIFI_LOG_DEBUG + LogLevelVerbose = C.WIFI_LOG_VERBOSE +) + +type Config struct { + Logging LogLevel +} + +// Enable and configure the radio. +func Enable(config Config) error { + initHardware() + + // TODO: run timers in separate goroutine + + errCode := C.esp_wifi_internal_set_log_level(C.wifi_log_level_t(config.Logging)) + if errCode != 0 { + return makeError(errCode) + } + + // TODO: BLE needs the interrupts RWBT, RWBLE, BT_BB + + mask := interrupt.Disable() + // TODO: setup 200Hz tick rate timer + // TODO: init_clocks + interrupt.Restore(mask) + + // Initialize the wireless stack. + errCode = C.esp_wifi_init_internal(&C.wifi_config) + if errCode != 0 { + return makeError(errCode) + } + + return nil +} + +func millisecondsToTicks(ms uint32) uint32 { + return ms * (ticksPerSecond / 1000) +} + +func ticksToMilliseconds(ticks uint32) uint32 { + return ticks / (ticksPerSecond / 1000) +} + +//export espradio_panic +func espradio_panic(msg *C.char) { + panic("espradio: " + C.GoString(msg)) +} + +//export espradio_log_timestamp +func espradio_log_timestamp() uint32 { + return uint32(time.Now().UnixMilli()) +} + +//export espradio_run_task +func espradio_run_task(task_func, param unsafe.Pointer) + +//export espradio_task_create_pinned_to_core +func espradio_task_create_pinned_to_core(task_func unsafe.Pointer, name *C.char, stack_depth uint32, param unsafe.Pointer, prio uint32, task_handle *unsafe.Pointer, core_id uint32) int32 { + ch := make(chan struct{}, 1) + go func() { + *task_handle = tinygo_task_current() + close(ch) + espradio_run_task(task_func, unsafe.Pointer(task_handle)) + }() + <-ch + return 1 +} + +//export espradio_task_delete +func espradio_task_delete(task_handle unsafe.Pointer) { + println("espradio TODO: delete task", task_handle) +} + +//export tinygo_task_current +func tinygo_task_current() unsafe.Pointer + +//export espradio_task_get_current_task +func espradio_task_get_current_task() unsafe.Pointer { + return tinygo_task_current() +} + +//export espradio_task_delay +func espradio_task_delay(ticks uint32) { + const ticksPerMillisecond = ticksPerSecond / 1000 + // Round milliseconds up. + ms := (ticks + ticksPerMillisecond - 1) / ticksPerMillisecond + time.Sleep(time.Duration(ms) * time.Millisecond) +} + +//export espradio_task_ms_to_tick +func espradio_task_ms_to_tick(ms uint32) int32 { + return int32(millisecondsToTicks(ms)) +} + +//export espradio_wifi_int_disable +func espradio_wifi_int_disable(wifi_int_mux unsafe.Pointer) uint32 { + // This is portENTER_CRITICAL (or portENTER_CRITICAL_ISR). + return uint32(interrupt.Disable()) +} + +//export espradio_wifi_int_restore +func espradio_wifi_int_restore(wifi_int_mux unsafe.Pointer, tmp uint32) { + // This is portEXIT_CRITICAL (or portEXIT_CRITICAL_ISR). + interrupt.Restore(interrupt.State(tmp)) +} diff --git a/espradio/radio_esp32c3.go b/espradio/radio_esp32c3.go new file mode 100644 index 000000000..44f41e4e3 --- /dev/null +++ b/espradio/radio_esp32c3.go @@ -0,0 +1,41 @@ +//go:build esp32c3 + +package espradio + +import "device/esp" + +func initHardware() error { + // See: + // https://github.com/esp-rs/esp-wifi/blob/v0.2.0/esp-wifi/src/common_adapter/common_adapter_esp32c3.rs#L18 + + const ( + SYSTEM_WIFIBB_RST = 1 << 0 + SYSTEM_FE_RST = 1 << 1 + SYSTEM_WIFIMAC_RST = 1 << 2 + SYSTEM_BTBB_RST = 1 << 3 // Bluetooth Baseband + SYSTEM_BTMAC_RST = 1 << 4 // deprecated + SYSTEM_RW_BTMAC_RST = 1 << 9 // Bluetooth MAC + SYSTEM_RW_BTMAC_REG_RST = 1 << 11 // Bluetooth MAC Regsiters + SYSTEM_BTBB_REG_RST = 1 << 13 // Bluetooth Baseband Registers + ) + + const MODEM_RESET_FIELD_WHEN_PU = SYSTEM_WIFIBB_RST | + SYSTEM_FE_RST | + SYSTEM_WIFIMAC_RST | + SYSTEM_BTBB_RST | + SYSTEM_BTMAC_RST | + SYSTEM_RW_BTMAC_RST | + SYSTEM_RW_BTMAC_REG_RST | + SYSTEM_BTBB_REG_RST + + esp.RTC_CNTL.DIG_PWC.ClearBits(esp.RTC_CNTL_DIG_PWC_WIFI_FORCE_PD) + esp.APB_CTRL.WIFI_RST_EN.SetBits(MODEM_RESET_FIELD_WHEN_PU) + esp.APB_CTRL.WIFI_RST_EN.ClearBits(MODEM_RESET_FIELD_WHEN_PU) + esp.RTC_CNTL.DIG_ISO.ClearBits(esp.RTC_CNTL_DIG_ISO_FORCE_OFF) + + return nil +} + +// This is the value used for the ESP32-C3, see: +// https://github.com/esp-rs/esp-wifi/blob/v0.2.0/esp-wifi/src/timer/riscv.rs#L28 +const ticksPerSecond = 16_000_000 diff --git a/espradio/radio_other.go b/espradio/radio_other.go new file mode 100644 index 000000000..8b72ff298 --- /dev/null +++ b/espradio/radio_other.go @@ -0,0 +1,14 @@ +//go:build !esp32c3 + +package espradio + +import "errors" + +// This is the value used for the ESP32-C3. +const ticksPerSecond = 16_000_000 + +var errUnsupportedChip = errors.New("espradio: unsupported chip") + +func initHardware() error { + return errUnsupportedChip +} diff --git a/espradio/sync.go b/espradio/sync.go new file mode 100644 index 000000000..a16f94e16 --- /dev/null +++ b/espradio/sync.go @@ -0,0 +1,163 @@ +package espradio + +// Various functions related to locks, mutexes, semaphores, and queues. + +/* +#include "include.h" +*/ +import "C" + +import ( + "sync" + "sync/atomic" + "time" + "unsafe" +) + +// Use a single fake spinlock. This is also how the Rust port does it. +var fakeSpinLock uint8 + +//export espradio_spin_lock_create +func espradio_spin_lock_create() unsafe.Pointer { + return unsafe.Pointer(&fakeSpinLock) +} + +//export espradio_spin_lock_delete +func espradio_spin_lock_delete(lock unsafe.Pointer) { +} + +// Use a global array of mutexes, because the binary blobs don't need that many. +var mutexes [2]sync.Mutex +var mutexIndex uint32 + +//export espradio_recursive_mutex_create +func espradio_recursive_mutex_create() unsafe.Pointer { + // Allocate a mutex from the global array. + // If the radio needs more mutexes, this will result in an index out of + // range panic (hopefully including a source location, if using + // `tinygo flash -monitor`). + newIndex := atomic.AddUint32(&mutexIndex, 1) + mutex := &mutexes[newIndex-1] + return unsafe.Pointer(mutex) +} + +//export espradio_mutex_lock +func espradio_mutex_lock(cmut unsafe.Pointer) int32 { + // This is xSemaphoreTake with an infinite timeout in ESP-IDF. Therefore, + // just lock the mutex and return true. + // TODO: recursive locking. See: + // https://www.freertos.org/RTOS-Recursive-Mutexes.html + // For that we need to track the current goroutine - or maybe just whether + // we're inside a special goroutine like the timer goroutine. + mut := (*sync.Mutex)(cmut) + mut.Lock() + return 1 +} + +//export espradio_mutex_unlock +func espradio_mutex_unlock(cmut unsafe.Pointer) int32 { + // Note: this is xSemaphoreGive in the ESP-IDF, which doesn't panic when + // unlocking fails but rather returns false. + mut := (*sync.Mutex)(cmut) + mut.Unlock() + return 1 +} + +type semaphore chan struct{} + +var semaphores [2]semaphore +var semaphoreIndex uint32 +var wifiSemaphore semaphore + +//export espradio_semphr_create +func espradio_semphr_create(max, init uint32) unsafe.Pointer { + newIndex := atomic.AddUint32(&semaphoreIndex, 1) + sem := &semaphores[newIndex-1] + ch := make(semaphore, max) + for i := uint32(0); i < init; i++ { + ch <- struct{}{} + } + *sem = ch + return unsafe.Pointer(sem) +} + +//export espradio_semphr_take +func espradio_semphr_take(semphr unsafe.Pointer, block_time_tick uint32) int32 { + sem := (*semaphore)(semphr) + if block_time_tick != C.OSI_FUNCS_TIME_BLOCKING { + panic("espradio: todo: semphr_take with timeout") + } + <-*sem + return 1 +} + +//export espradio_semphr_give +func espradio_semphr_give(semphr unsafe.Pointer) int32 { + // Note: we might need to return 0 when sending isn't possible (e.g. using a + // non-blocking send). According to the documentation of xSemaphoreGive: + // + // > pdTRUE if the semaphore was released. pdFALSE if an error occurred. + // > Semaphores are implemented using queues. An error can occur if there is + // > no space on the queue to post a message - indicating that the semaphore + // > was not first obtained correctly. + sem := (*semaphore)(semphr) + *sem <- struct{}{} + return 1 +} + +//export espradio_semphr_delete +func espradio_semphr_delete(semphr unsafe.Pointer) { + sem := (*semaphore)(semphr) + close(*sem) +} + +//export espradio_wifi_thread_semphr_get +func espradio_wifi_thread_semphr_get() unsafe.Pointer { + if wifiSemaphore == nil { + wifiSemaphore = make(semaphore, 1) + } + return unsafe.Pointer(&wifiSemaphore) +} + +type queueElementType [8]byte + +//export espradio_wifi_create_queue +func espradio_wifi_create_queue(queue_len, item_size int) chan queueElementType { + if item_size != len(queueElementType{}) { + panic("espradio: unexpected queue item_size") + } + return make(chan queueElementType, item_size) +} + +//export espradio_wifi_delete_queue +func espradio_wifi_delete_queue(queue chan queueElementType) { + // We can't really delete a channel, but we can close it. + close(queue) +} + +//export espradio_queue_recv +func espradio_queue_recv(queue chan queueElementType, item unsafe.Pointer, block_time_tick uint32) int32 { + // This is xQueueReceive. + if block_time_tick != C.OSI_FUNCS_TIME_BLOCKING { + panic("espradio: todo: queue_recv with timeout") + } + *(*[8]byte)(item) = <-queue + return 1 +} + +//export espradio_queue_send +func espradio_queue_send(queue chan queueElementType, item unsafe.Pointer, block_time_tick uint32) int32 { + // This is xQueueSend. + if block_time_tick != C.OSI_FUNCS_TIME_BLOCKING { + duration := time.Duration(ticksToMilliseconds(block_time_tick)) * time.Millisecond + // TODO: reuse the timer to avoid allocating a new timer on each queue send + select { + case <-time.After(duration): + return 0 + case queue <- *(*[8]byte)(item): + return 1 + } + } + queue <- *(*[8]byte)(item) + return 1 +} diff --git a/examples/espradio/main.go b/examples/espradio/main.go new file mode 100644 index 000000000..510126533 --- /dev/null +++ b/examples/espradio/main.go @@ -0,0 +1,21 @@ +package main + +import ( + "time" + + "tinygo.org/x/drivers/espradio" +) + +func main() { + time.Sleep(time.Second * 1) + + println("initializing radio...") + err := espradio.Enable(espradio.Config{ + Logging: espradio.LogLevelVerbose, + }) + if err != nil { + println("could not enable radio:", err) + } else { + println("enabled radio successfully") + } +}