chore: enable extend_trajectory_for_end_yaw_control (autowarefoundation#848)

Signed-off-by: Shumpei Wakabayashi <shumpei.wakabayashi@tier4.jp>

Author: shmpwk

autoware_launch/config/control/trajectory_follower/1/lateral/mpc.param.yaml

@@ -13,7 +13,7 @@
     curvature_smoothing_num_ref_steer: 15   # point-to-point index distance used in curvature calculation (for steer command reference): curvature is calculated from three points p(i-num), p(i), p(i+num)
 
     # -- trajectory extending --
-    extend_trajectory_for_end_yaw_control: false  # flag of trajectory extending for terminal yaw control
+    extend_trajectory_for_end_yaw_control: true  # flag of trajectory extending for terminal yaw control
 
     # -- mpc optimization --
     qp_solver_type: "osqp"                       # optimization solver option (unconstraint_fast or osqp)

autoware_launch/config/control/trajectory_follower/10/lateral/mpc.param.yaml

@@ -13,7 +13,7 @@
     curvature_smoothing_num_ref_steer: 15   # point-to-point index distance used in curvature calculation (for steer command reference): curvature is calculated from three points p(i-num), p(i), p(i+num)
 
     # -- trajectory extending --
-    extend_trajectory_for_end_yaw_control: false  # flag of trajectory extending for terminal yaw control
+    extend_trajectory_for_end_yaw_control: true  # flag of trajectory extending for terminal yaw control
 
     # -- mpc optimization --
     qp_solver_type: "osqp"                       # optimization solver option (unconstraint_fast or osqp)

autoware_launch/config/control/trajectory_follower/2/lateral/mpc.param.yaml

@@ -13,7 +13,7 @@
     curvature_smoothing_num_ref_steer: 15   # point-to-point index distance used in curvature calculation (for steer command reference): curvature is calculated from three points p(i-num), p(i), p(i+num)
 
     # -- trajectory extending --
-    extend_trajectory_for_end_yaw_control: false # flag of trajectory extending for terminal yaw control
+    extend_trajectory_for_end_yaw_control: true # flag of trajectory extending for terminal yaw control
 
     # -- mpc optimization --
     qp_solver_type: "osqp"                       # optimization solver option (unconstraint_fast or osqp)

autoware_launch/config/control/trajectory_follower/3/lateral/mpc.param.yaml

@@ -13,7 +13,7 @@
     curvature_smoothing_num_ref_steer: 15   # point-to-point index distance used in curvature calculation (for steer command reference): curvature is calculated from three points p(i-num), p(i), p(i+num)
 
     # -- trajectory extending --
-    extend_trajectory_for_end_yaw_control: false  # flag of trajectory extending for terminal yaw control
+    extend_trajectory_for_end_yaw_control: true  # flag of trajectory extending for terminal yaw control
 
     # -- mpc optimization --
     qp_solver_type: "osqp"                       # optimization solver option (unconstraint_fast or osqp)

autoware_launch/config/control/trajectory_follower/4/lateral/mpc.param.yaml

@@ -13,7 +13,7 @@
     curvature_smoothing_num_ref_steer: 15   # point-to-point index distance used in curvature calculation (for steer command reference): curvature is calculated from three points p(i-num), p(i), p(i+num)
 
     # -- trajectory extending --
-    extend_trajectory_for_end_yaw_control: false  # flag of trajectory extending for terminal yaw control
+    extend_trajectory_for_end_yaw_control: true  # flag of trajectory extending for terminal yaw control
 
     # -- mpc optimization --
     qp_solver_type: "osqp"                       # optimization solver option (unconstraint_fast or osqp)

autoware_launch/config/control/trajectory_follower/5/lateral/mpc.param.yaml

@@ -13,7 +13,7 @@
     curvature_smoothing_num_ref_steer: 15   # point-to-point index distance used in curvature calculation (for steer command reference): curvature is calculated from three points p(i-num), p(i), p(i+num)
 
     # -- trajectory extending --
-    extend_trajectory_for_end_yaw_control: false # flag of trajectory extending for terminal yaw control
+    extend_trajectory_for_end_yaw_control: true # flag of trajectory extending for terminal yaw control
 
     # -- mpc optimization --
     qp_solver_type: "osqp"                       # optimization solver option (unconstraint_fast or osqp)

autoware_launch/config/control/trajectory_follower/6/lateral/mpc.param.yaml

@@ -13,7 +13,7 @@
     curvature_smoothing_num_ref_steer: 15   # point-to-point index distance used in curvature calculation (for steer command reference): curvature is calculated from three points p(i-num), p(i), p(i+num)
 
     # -- trajectory extending --
-    extend_trajectory_for_end_yaw_control: false # flag of trajectory extending for terminal yaw control
+    extend_trajectory_for_end_yaw_control: true # flag of trajectory extending for terminal yaw control
 
     # -- mpc optimization --
     qp_solver_type: "osqp"                       # optimization solver option (unconstraint_fast or osqp)

autoware_launch/config/control/trajectory_follower/7/lateral/mpc.param.yaml

@@ -13,7 +13,7 @@
     curvature_smoothing_num_ref_steer: 15   # point-to-point index distance used in curvature calculation (for steer command reference): curvature is calculated from three points p(i-num), p(i), p(i+num)
 
     # -- trajectory extending --
-    extend_trajectory_for_end_yaw_control: false  # flag of trajectory extending for terminal yaw control
+    extend_trajectory_for_end_yaw_control: true  # flag of trajectory extending for terminal yaw control
 
     # -- mpc optimization --
     qp_solver_type: "osqp"                       # optimization solver option (unconstraint_fast or osqp)

autoware_launch/config/control/trajectory_follower/9/lateral/mpc.param.yaml

@@ -13,7 +13,7 @@
     curvature_smoothing_num_ref_steer: 15   # point-to-point index distance used in curvature calculation (for steer command reference): curvature is calculated from three points p(i-num), p(i), p(i+num)
 
     # -- trajectory extending --
-    extend_trajectory_for_end_yaw_control: false  # flag of trajectory extending for terminal yaw control
+    extend_trajectory_for_end_yaw_control: true  # flag of trajectory extending for terminal yaw control
 
     # -- mpc optimization --
     qp_solver_type: "osqp"                       # optimization solver option (unconstraint_fast or osqp)

autoware_launch/config/control/trajectory_follower/awsim_jpt/lateral/mpc.param.yaml

@@ -13,7 +13,7 @@
     curvature_smoothing_num_ref_steer: 15   # point-to-point index distance used in curvature calculation (for steer command reference): curvature is calculated from three points p(i-num), p(i), p(i+num)
 
     # -- trajectory extending --
-    extend_trajectory_for_end_yaw_control: false  # flag of trajectory extending for terminal yaw control
+    extend_trajectory_for_end_yaw_control: true  # flag of trajectory extending for terminal yaw control
 
     # -- mpc optimization --
     qp_solver_type: "osqp"                       # optimization solver option (unconstraint_fast or osqp)

autoware_launch/config/control/trajectory_follower/default/lateral/mpc.param.yaml

@@ -13,7 +13,7 @@
     curvature_smoothing_num_ref_steer: 15   # point-to-point index distance used in curvature calculation (for steer command reference): curvature is calculated from three points p(i-num), p(i), p(i+num)
 
     # -- trajectory extending --
-    extend_trajectory_for_end_yaw_control: false  # flag of trajectory extending for terminal yaw control
+    extend_trajectory_for_end_yaw_control: true  # flag of trajectory extending for terminal yaw control
 
     # -- mpc optimization --
     qp_solver_type: "osqp"                       # optimization solver option (unconstraint_fast or osqp)