[Mellanox] Update sensors.conf of SN5610N, SN5640 platforms

Author: noaOrMlnx

device/mellanox/x86_64-nvidia_sn5610n-r0/sensors.conf

@@ -1,9 +1,15 @@
 ##################################################################################
-# Copyright (c) 2019-2024, NVIDIA CORPORATION & AFFILIATES. All rights reserved.
+# Copyright (c) 2019-2025, NVIDIA CORPORATION & AFFILIATES. All rights reserved.
 #
 # Platform specific sensors config for SN5640
 ##################################################################################
 
+# Hardware revision default
+
+# ASIC temperature sensor
+chip "mlxsw-i2c-*-48"
+    label temp1 "Ambient ASIC Temp"
+
 # Fan and port ambient temperature sensors
 chip "tmp102-i2c-*-49"
     label temp1 "Ambient Fan Side Temp (air exhaust)"
@@ -382,64 +388,77 @@ chip "xdpe1a2g7-i2c-*-6e"
 chip "dps460-i2c-*-59"
     label in1 "PSU-1(L) 220V Rail (in)"
     ignore in2
-    label in3 "PSU-1(L) 54V Rail (out)"
+    label in3 "PSU-1(L) 12V Rail (out)"
     ignore fan2
     ignore fan3
     label fan1 "PSU-1(L) Fan 1"
     label temp1 "PSU-1(L) Temp 1"
     label temp2 "PSU-1(L) Temp 2"
     label temp3 "PSU-1(L) Temp 3"
     label power1 "PSU-1(L) 220V Rail Pwr (in)"
-    label power2 "PSU-1(L) 54V Rail Pwr (out)"
+    label power2 "PSU-1(L) 12V Rail Pwr (out)"
     label curr1 "PSU-1(L) 220V Rail Curr (in)"
-    label curr2 "PSU-1(L) 54V Rail Curr (out)"
+    label curr2 "PSU-1(L) 12V Rail Curr (out)"
     set power2_cap 0
 chip "dps460-i2c-*-58"
-    label in1 "PSU-2(R) 220V Rail (in)"
+    label in1 "PSU-2(L) 220V Rail (in)"
     ignore in2
-    label in3 "PSU-2(R) 54V Rail (out)"
+    label in3 "PSU-2(L) 12V Rail (out)"
     ignore fan2
     ignore fan3
-    label fan1 "PSU-2(R) Fan 1"
-    label temp1 "PSU-2(R) Temp 1"
-    label temp2 "PSU-2(R) Temp 2"
-    label temp3 "PSU-2(R) Temp 3"
-    label power1 "PSU-2(R) 220V Rail Pwr (in)"
-    label power2 "PSU-2(R) 54V Rail Pwr (out)"
-    label curr1 "PSU-2(R) 220V Rail Curr (in)"
-    label curr2 "PSU-2(R) 54V Rail Curr (out)"
+    label fan1 "PSU-2(L) Fan 1"
+    label temp1 "PSU-2(L) Temp 1"
+    label temp2 "PSU-2(L) Temp 2"
+    label temp3 "PSU-2(L) Temp 3"
+    label power1 "PSU-2(L) 220V Rail Pwr (in)"
+    label power2 "PSU-2(L) 12V Rail Pwr (out)"
+    label curr1 "PSU-2(L) 220V Rail Curr (in)"
+    label curr2 "PSU-2(L) 12V Rail Curr (out)"
     set power2_cap 0
 chip "dps460-i2c-*-5b"
     label in1 "PSU-3(R) 220V Rail (in)"
     ignore in2
-    label in3 "PSU-3(R) 54V Rail (out)"
+    label in3 "PSU-3(R) 12V Rail (out)"
     ignore fan2
     ignore fan3
     label fan1 "PSU-3(R) Fan 1"
     label temp1 "PSU-3(R) Temp 1"
     label temp2 "PSU-3(R) Temp 2"
     label temp3 "PSU-3(R) Temp 3"
     label power1 "PSU-3(R) 220V Rail Pwr (in)"
-    label power2 "PSU-3(R) 54V Rail Pwr (out)"
+    label power2 "PSU-3(R) 12V Rail Pwr (out)"
     label curr1 "PSU-3(R) 220V Rail Curr (in)"
-    label curr2 "PSU-3(R) 54V Rail Curr (out)"
+    label curr2 "PSU-3(R) 12V Rail Curr (out)"
     set power2_cap 0
 chip "dps460-i2c-*-5a"
     label in1 "PSU-4(R) 220V Rail (in)"
     ignore in2
-    label in3 "PSU-4(R) 54V Rail (out)"
+    label in3 "PSU-4(R) 12V Rail (out)"
     ignore fan2
     ignore fan3
     label fan1 "PSU-4(R) Fan 1"
     label temp1 "PSU-4(R) Temp 1"
     label temp2 "PSU-4(R) Temp 2"
     label temp3 "PSU-4(R) Temp 3"
     label power1 "PSU-4(R) 220V Rail Pwr (in)"
-    label power2 "PSU-4(R) 54V Rail Pwr (out)"
+    label power2 "PSU-4(R) 12V Rail Pwr (out)"
     label curr1 "PSU-4(R) 220V Rail Curr (in)"
-    label curr2 "PSU-4(R) 54V Rail Curr (out)"
+    label curr2 "PSU-4(R) 12V Rail Curr (out)"
     set power2_cap 0
 
+# Chassis fans
+chip "mlxreg_fan-isa-*"
+    label fan1 "Chassis Fan Drawer-1 Tach 1"
+    label fan2 "Chassis Fan Drawer-1 Tach 2"
+    label fan3 "Chassis Fan Drawer-2 Tach 1"
+    label fan4 "Chassis Fan Drawer-2 Tach 2"
+    label fan5 "Chassis Fan Drawer-3 Tach 1"
+    label fan6 "Chassis Fan Drawer-3 Tach 2"
+    label fan7 "Chassis Fan Drawer-4 Tach 1"
+    label fan8 "Chassis Fan Drawer-4 Tach 2"
+    label fan9 "Chassis Fan Drawer-5 Tach 1"
+    label fan10 "Chassis Fan Drawer-5 Tach 2"
+
 # AMD Comex Power controllers
 chip "mp2855-i2c-*-69"
     label in1 "PMIC-12 COMEX (in) VDDCR INPUT VOLT"
@@ -486,5 +505,5 @@ chip "nvme-pci-*"
     ignore temp3
 
 # Ethernet PHY temperature sensor
-chip "00000500400-mdio-5"
-   label temp1 "PHY TEMP"
+chip "*-mdio-*"
+   ignore temp1

device/mellanox/x86_64-nvidia_sn5640-r0/sensors.conf

@@ -1,9 +1,11 @@
 ##################################################################################
-# Copyright (c) 2019-2024, NVIDIA CORPORATION & AFFILIATES. All rights reserved.
+# Copyright (c) 2019-2025, NVIDIA CORPORATION & AFFILIATES. All rights reserved.
 #
 # Platform specific sensors config for SN5640
 ##################################################################################
 
+# Hardware revision default
+
 # ASIC temperature sensor
 chip "mlxsw-i2c-*-48"
     label temp1 "Ambient ASIC Temp"
@@ -406,7 +408,7 @@ chip "dps460-i2c-*-58"
     ignore fan3
     label fan1 "PSU-2(L) Fan 1"
     label temp1 "PSU-2(L) Temp 1"
-    label temp2 "PSU-2(R) Temp 2"
+    label temp2 "PSU-2(L) Temp 2"
     label temp3 "PSU-2(L) Temp 3"
     label power1 "PSU-2(L) 220V Rail Pwr (in)"
     label power2 "PSU-2(L) 12V Rail Pwr (out)"
@@ -444,6 +446,19 @@ chip "dps460-i2c-*-5a"
     label curr2 "PSU-4(R) 12V Rail Curr (out)"
     set power2_cap 0
 
+# Chassis fans
+chip "mlxreg_fan-isa-*"
+    label fan1 "Chassis Fan Drawer-1 Tach 1"
+    label fan2 "Chassis Fan Drawer-1 Tach 2"
+    label fan3 "Chassis Fan Drawer-2 Tach 1"
+    label fan4 "Chassis Fan Drawer-2 Tach 2"
+    label fan5 "Chassis Fan Drawer-3 Tach 1"
+    label fan6 "Chassis Fan Drawer-3 Tach 2"
+    label fan7 "Chassis Fan Drawer-4 Tach 1"
+    label fan8 "Chassis Fan Drawer-4 Tach 2"
+    label fan9 "Chassis Fan Drawer-5 Tach 1"
+    label fan10 "Chassis Fan Drawer-5 Tach 2"
+
 # AMD Comex Power controllers
 chip "mp2855-i2c-*-69"
     label in1 "PMIC-12 COMEX (in) VDDCR INPUT VOLT"
@@ -490,5 +505,5 @@ chip "nvme-pci-*"
     ignore temp3
 
 # Ethernet PHY temperature sensor
-chip "00000400400-mdio-4"
-   label temp1 "Eth Phy Temp"
+chip "*-mdio-*"
+   ignore temp1