Makefile.cfg

#----------------------------------------------------------------------
# SVGAlib Compile-time configuration file
#----------------------------------------------------------------------
# If you change ANYTHING in here you MUST 'make clean' and remake what
# you need.
#
# BEWARE! The toggle settings (INCLUDE_*_DRIVER and such) are set when
# the symbols are set. The value is pointless. Even setting a variable
# to n means yes!

MAJOR_VER = 1
MINOR_VER = 9.25
VERSION = $(MAJOR_VER).$(MINOR_VER)

#----------------------------------------------------------------------
# Kernel module Configuration Section
#----------------------------------------------------------------------
# Char major device used by module
SVGALIB_HELPER_MAJOR = 209

# Linux kernel includes
ifeq ($(S_KERNELRELEASE),)
S_KERNELRELEASE = $(shell uname -r)
endif

INCLUDEDIR = /lib/modules/$(S_KERNELRELEASE)/build/include

DIREXIST = $(shell if [ -e $(INCLUDEDIR) ] ; then echo OK ; fi)
ifneq ($(DIREXIST), OK)
INCLUDEDIR = /usr/src/linux/include
endif

ARCH := $(shell uname -m | sed -e s/i.86/i386/ -e s/sun4u/sparc64/ -e s/arm.*/arm/ -e s/sa110/arm/)

#----------------------------------------------------------------------
# Configuration Section
#----------------------------------------------------------------------
# Source directory.
#srcdir = /usr/local/src/svgalib-$(VERSION)
SRCDIR = $(shell sh -c pwd)

CONFDIR = $(SRCDIR)/src/config

# Common prefix for installation directories.
# NOTE: This directory must exist when you start the install.
TOPDIR=
prefix = $(TOPDIR)/usr/local
exec_prefix = $(prefix)

# Directory where the shared stubs and static library will be installed.
libdir = $(exec_prefix)/lib

# Directory where the shared library will be installed.
sharedlibdir = $(exec_prefix)/lib

# Directory where the font and textmode utilities will be installed.
bindir = $(exec_prefix)/bin

# Directory where the run-time configuration files will be installed.
datadir = $(TOPDIR)/etc/vga

# Directory where the header files will be installed.
includedir = $(prefix)/include

# Directory where the man files will be installed.
mandir = $(prefix)/share/man

# Directory where the udev rules files will be installed.
rulesdir = $(TOPDIR)/etc/udev/rules.d

# Directory where the documentation will be installed.
docdir = $(prefix)/share/doc/svgalib-$(VERSION)

# Target binary format.
TARGET_FORMAT = elf

# Uncomment this to use lrmi-0.9, instead of 0.6
# USE_LRMI_9 = y

# uncomment any of the following line to print some debug messages
# DEBUG = yes
# DEBUG_CONF = yes
# DEBUG_ACCEL = yes
# DEBUG_KEYBOARD = yes

# uncomment this if your compiler fails on compiling the assembler in
# src/vgaconvplanar.c, gl/inlstring.h, gl/line.c or gl/scale.c
# NO_ASM = y

# uncomment if you want to set attribute controller and dac without delay
# This breaks original VGA, but seems to work on new cards.
NO_DELAY = y

# Uncomment this if you want root processes to be able to always get a new
# VC. Alas, some games misuse suid root privs and become root, svgalib cannot
# detect this and will allow Joe blow user to open a new virtual VC. If this
# annoys you, comment out the next line (which is the default already)
ROOT_VC_SHORTCUT = y

# Uncomment thit to use libc's memcpy, instead of simple while loop.
# Use demos/linearspeed to see which is faster to video memory.
LIBC_MEMCPY = y

# Uncomment this if you want to compile and install the static libs.
# INSTALLSTATICLIB = installstaticlib

# Comment this out if you don't want to install the shared libs.
# If you do not install the shared nor the static libs, 'make static'
# first to enforce just building the static lib, then the demos will
# use this local static library!
INSTALLSHAREDLIB = installsharedlib

# Comment this out if you want to keep old shared images. Old header files,
# library stubs and static libraries CANNOT be kept in public locations
# except when you rename them yourself.
# KEEPSHAREDLIBS = keep

# Comment this out if you don't want to compile and install the utilities.
INSTALLUTILS = installutils

# Comment this out if you don't want to install the man pages by default
INSTALLMAN = installman

# Remove the '# ' from one of the next two lines if you want to install the
# man pages compressed (with gzip) or not. If you comment out both lines,
# the Makefiles will try to figure out if your system supports gzipped man
# pages and install them when possible.

# MANFORMAT = compressed
# MANFORMAT = uncompressed

# This is the command to update the man pages whatis database.
# This is a slow command. If you are not very patient, simple
# comment out this line
# MAKEWHATIS = makewhatis # Beware, this will really need a few minutes!

# Comment this out if you use devfs or udev and don't want to make svga nodes
# INSTALLDEV = installdev

# Select which makefile to use to install the module, or comment both out if
# you are going to install the kernel module manually
INSTALLMODULE = installmodule
# INSTALLMODULE = installmodule.alt

#
# Comment out any driver that you don't want included in the library.

# These drivers are obsolete and quite likely broken:

#INCLUDE_ET4000_DRIVER = y
#INCLUDE_OAK_DRIVER = y
#INCLUDE_EGA_DRIVER = y
#INCLUDE_MACH32_DRIVER = y
#INCLUDE_ET3000_DRIVER = y
#INCLUDE_GVGA6400_DRIVER = y
#INCLUDE_ATI_DRIVER = y

# End of obsolete drivers.

INCLUDE_CHIPS_DRIVER = y

INCLUDE_APM_DRIVER = y
INCLUDE_NV3_DRIVER = y
INCLUDE_G400_DRIVER = y
INCLUDE_R128_DRIVER = y
INCLUDE_VESA_DRIVER = y
INCLUDE_MX_DRIVER = y
INCLUDE_RENDITION_DRIVER = y
INCLUDE_RAGE_DRIVER = y
INCLUDE_BANSHEE_DRIVER = y
INCLUDE_SIS_DRIVER = y
INCLUDE_I740_DRIVER = y
INCLUDE_I810_DRIVER = y
INCLUDE_LAGUNA_DRIVER = y
INCLUDE_TRIDENT_DRIVER = y
INCLUDE_SAVAGE_DRIVER = y
INCLUDE_MILLENNIUM_DRIVER = y
##INCLUDE_G450C2_DRIVER = y
INCLUDE_PM2_DRIVER = y
INCLUDE_UNICHROME_DRIVER = y

INCLUDE_NEO_DRIVER = y
INCLUDE_ET6000_DRIVER = y
INCLUDE_FBDEV_DRIVER = y

# These drivers are obsolete, but most likely still work:

INCLUDE_PARADISE_DRIVER = y
INCLUDE_ARK_DRIVER = y
INCLUDE_S3_DRIVER = y
INCLUDE_CIRRUS_DRIVER = y
INCLUDE_TVGA_DRIVER = y
INCLUDE_ALI_DRIVER = y


#
# Comment out any adapter you don't want to autodetect.
#
#INCLUDE_ET4000_DRIVER_TEST = y
INCLUDE_CIRRUS_DRIVER_TEST = y
INCLUDE_TVGA_DRIVER_TEST = y
INCLUDE_OAK_DRIVER_TEST = y
INCLUDE_EGA_DRIVER_TEST = y
INCLUDE_MACH32_DRIVER_TEST = y
INCLUDE_GVGA6400_DRIVER_TEST = y
INCLUDE_S3_DRIVER_TEST = y
INCLUDE_ET3000_DRIVER_TEST = y
INCLUDE_ARK_DRIVER_TEST = y
INCLUDE_ATI_DRIVER_TEST = y
INCLUDE_ALI_DRIVER_TEST = y
INCLUDE_CHIPS_DRIVER_TEST = y
INCLUDE_APM_DRIVER_TEST = y
INCLUDE_NV3_DRIVER_TEST = y
INCLUDE_G400_DRIVER_TEST = y
INCLUDE_R128_DRIVER_TEST = y
INCLUDE_ET6000_DRIVER_TEST = y
INCLUDE_MX_DRIVER_TEST = y
INCLUDE_TRIDENT_DRIVER_TEST = y
INCLUDE_PARADISE_DRIVER_TEST = y
INCLUDE_RAGE_DRIVER_TEST = y
INCLUDE_BANSHEE_DRIVER_TEST = y
INCLUDE_SIS_DRIVER_TEST = y
INCLUDE_I740_DRIVER_TEST = y
INCLUDE_I810_DRIVER_TEST = y
INCLUDE_LAGUNA_DRIVER_TEST = y
INCLUDE_NEO_DRIVER_TEST = y
INCLUDE_SAVAGE_DRIVER_TEST = y
INCLUDE_MILLENNIUM_DRIVER_TEST = y
INCLUDE_RENDITION_DRIVER_TEST = y
INCLUDE_PM2_DRIVER_TEST = y
INCLUDE_UNICHROME_DRIVER_TEST = y

#INCLUDE_FBDEV_DRIVER_TEST = y

#Might be too dangerous:
#INCLUDE_VESA_DRIVER_TEST = y

#
# Comment out any dac support that you don't want included in the library.
#
# you must include SIERRA_DAC, if you include any of SCxxxx DACs.


INCLUDE_NORMAL_DAC = y
INCLUDE_S3_SDAC_DAC = y
INCLUDE_S3_GENDAC_DAC = y
INCLUDE_S3_TRIO64_DAC = y
INCLUDE_SIERRA_DAC = y
INCLUDE_SC15025_DAC = y
INCLUDE_ATT20C490_DAC = y
INCLUDE_ATT20C498_DAC = y
INCLUDE_ICW_DAC = y
INCLUDE_IBMRGB52x_DAC = y
INCLUDE_SC1148X_DAC = y
INCLUDE_ICS_GENDAC_DAC = y

#
# Comment out any dac you don't want to autodetect.
# (not all dacs can be autodetected, at this time)
#
INCLUDE_S3_SDAC_DAC_TEST = y
INCLUDE_S3_GENDAC_DAC_TEST = y
INCLUDE_SC15025_DAC_TEST = y
INCLUDE_ATT20C490_DAC_TEST = y
INCLUDE_IBMRGB52x_DAC_TEST = y
INCLUDE_SC1148X_DAC_TEST = y
INCLUDE_ICS_GENDAC_DAC_TEST = y

# LRMI - disbaled for non i386
LRMI = lrmi

# Location of the svgalib configuration file.
SVGALIB_CONFIG_FILE = $(datadir)/libvga.config

# Defining DYNAMIC enables runtime parsing of the file defined by
# ET4000_REGS (usually /etc/libvga.et4000) for the et4000 
# driver. See et4000/README for details. Commenting this out again
# saves binary space.
#
# If you just want to use the et4000.regs in the source directory,
# comment out the definition of DYNAMIC.  DYNAMIC allows development of new
# resolutions without recompiling.
DYNAMIC = y
ET4000_REGS = $(datadir)/libvga.et4000

# The EGA driver may load additional modes (SuperEGA cards) like the
# et4000 driver does. Just define the configuration file below.
# [This should be taken with a grain of salt, EGA is untested.]
#EGA_REGS = $(datadir)/libvga.ega

# Defining USE_CLOCKS will cause the ET4000 driver to measure clock
# frequencies (they are not actually used yet).
#USE_CLOCKS = y

# Uncomment to allow mouse type overrides
ALLOW_MOUSE_OVERRIDE = y

#----------------------------------------------------------------------
# Compiler Section
#----------------------------------------------------------------------

# Compiler used.
PC	 = ppc386

ifndef CC
	CC	= gcc
endif


ifndef CFLAGS
	OPTIMIZE = -fomit-frame-pointer -O2 -fno-strength-reduce -pipe
else
	OPTIMIZE := $(CFLAGS)
endif

# You might want to add -m386 here if you have a recently installed 
# (486 configured) compiler on a 386. The only real difference is the
# generous alignment padding of function entry-points for the 486.
WARN     = -Wall -Wstrict-prototypes
INCLUDES = -I$(srcdir)/include -I.
CFLAGS   = $(WARN) $(DLLFLAGS) $(INCLUDES) $(OPTIMIZE) $(DEFINES) 
LDFLAGS   = -s

# additional flags for shared lib.
DLLFLAGS = -fPIC -DPIC

# Utilites used.
AR	  = ar
INSTALL_PROGRAM	= install -sm0755
INSTALL_SCRIPT	= install  -m0755
INSTALL_SHLIB	= install  -m0755
INSTALL_DATA	= install  -m0644
INSTALL_DIR     = install  -m0755 -d


ifneq ($(ARCH),i386)
	NO_ASM = y
	INCLUDE_VESA_DRIVER=

	INCLUDE_CHIPS_DRIVER=
	INCLUDE_ET4000_DRIVER=
	INCLUDE_MACH32_DRIVER=
	INCLUDE_NEO_DRIVER=
	INCLUDE_TVGA_DRIVER=
	INCLUDE_I810_DRIVER=
	LRMI=
endif

ifeq ($(ARCH),ppc)
	INCLUDE_S3_DRIVER=
endif

ifneq ($(INCLUDE_S3_DRIVER),y)
	INCLUDE_NORMAL_DAC =
	INCLUDE_S3_SDAC_DAC =
	INCLUDE_S3_GENDAC_DAC =
	INCLUDE_S3_TRIO64_DAC =
	INCLUDE_SIERRA_DAC =
	INCLUDE_SC15025_DAC =
	INCLUDE_ATT20C490_DAC =
	INCLUDE_ATT20C498_DAC =
	INCLUDE_ICW_DAC =
	INCLUDE_IBMRGB52x_DAC =
	INCLUDE_SC1148X_DAC =
endif

ifeq ($(NO_HELPER),y)
	INSTALLDEV = 
	INSTALLMODULE =
endif