Skip to content

Home

Jump to bottom
Ricardo Guzman (Richonguzman) edited this page Aug 19, 2024 · 4 revisions

Welcome to the CA2RXU -> LoRa_APRS_Wx_Station wiki!

The main goal of this firmware is to build a LoRa APRS Weather Reporting Station by adding sensors to the board and sending the preconfigured packet to APRS-IS.

To start and configure your station check the following pages: 01.- Recommended Sensors for each Task (and buying links). 02.- How to configure the Station. 02.- Instructions how to connect the sensors. 04.- How to check/change Wind Sensor RS485 Address.

You can support this project to continue to grow:

Clone this wiki locally